d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
94d09127cb
freebsd-dev/sbin/camcontrol/camcontrol.c
Kenneth D. Merry 94d09127cb Add the -c flag in to the usage summaries in the man page and the usage() 
function in camcontrol.

Also, fix the modepage example in the examples section of the man page.  It
didn't quite come out right with the '.Dl' macro.
1998-10-03 19:15:53 +00:00

2055 lines
52 KiB
C
Raw Blame History

/*
* Copyright (c) 1997, 1998 Kenneth D. Merry
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: camcontrol.c,v 1.2 1998/10/02 21:00:38 ken Exp $
*/
#include <sys/ioctl.h>
#include <sys/types.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <ctype.h>
#include <err.h>
#include <cam/cam.h>
#include <cam/cam_debug.h>
#include <cam/cam_ccb.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_da.h>
#include <cam/scsi/scsi_pass.h>
#include <cam/scsi/scsi_message.h>
#include <camlib.h>
#include "camcontrol.h"
#define DEFAULT_DEVICE "da"
#define DEFAULT_UNIT 0
typedef enum {
CAM_ARG_NONE = 0x00000000,
CAM_ARG_DEVLIST = 0x00000001,
CAM_ARG_TUR = 0x00000002,
CAM_ARG_INQUIRY = 0x00000003,
CAM_ARG_STARTSTOP = 0x00000004,
CAM_ARG_RESCAN = 0x00000005,
CAM_ARG_READ_DEFECTS = 0x00000006,
CAM_ARG_MODE_PAGE = 0x00000007,
CAM_ARG_SCSI_CMD = 0x00000008,
CAM_ARG_DEVTREE = 0x00000009,
CAM_ARG_USAGE = 0x0000000a,
CAM_ARG_DEBUG = 0x0000000b,
CAM_ARG_OPT_MASK = 0x0000000f,
CAM_ARG_VERBOSE = 0x00000010,
CAM_ARG_DEVICE = 0x00000020,
CAM_ARG_BUS = 0x00000040,
CAM_ARG_TARGET = 0x00000080,
CAM_ARG_LUN = 0x00000100,
CAM_ARG_EJECT = 0x00000200,
CAM_ARG_UNIT = 0x00000400,
CAM_ARG_FORMAT_BLOCK = 0x00000800,
CAM_ARG_FORMAT_BFI = 0x00001000,
CAM_ARG_FORMAT_PHYS = 0x00002000,
CAM_ARG_PLIST = 0x00004000,
CAM_ARG_GLIST = 0x00008000,
CAM_ARG_GET_SERIAL = 0x00010000,
CAM_ARG_GET_STDINQ = 0x00020000,
CAM_ARG_GET_XFERRATE = 0x00040000,
CAM_ARG_INQ_MASK = 0x00070000,
CAM_ARG_MODE_EDIT = 0x00080000,
CAM_ARG_PAGE_CNTL = 0x00100000,
CAM_ARG_TIMEOUT = 0x00200000,
CAM_ARG_CMD_IN = 0x00400000,
CAM_ARG_CMD_OUT = 0x00800000,
CAM_ARG_DBD = 0x01000000,
CAM_ARG_ERR_RECOVER = 0x02000000,
CAM_ARG_RETRIES = 0x04000000,
CAM_ARG_START_UNIT = 0x08000000,
CAM_ARG_DEBUG_INFO = 0x10000000,
CAM_ARG_DEBUG_TRACE = 0x20000000,
CAM_ARG_DEBUG_SUBTRACE = 0x40000000,
CAM_ARG_DEBUG_CDB = 0x80000000,
CAM_ARG_FLAG_MASK = 0xfffffff0
} cam_argmask;
struct camcontrol_opts {
char *optname;
cam_argmask argnum;
const char *subopt;
};
extern int optreset;
static const char scsicmd_opts[] = "c:i:o:";
static const char readdefect_opts[] = "f:GP";
struct camcontrol_opts option_table[] = {
{"tur", CAM_ARG_TUR, NULL},
{"inquiry", CAM_ARG_INQUIRY, "DSR"},
{"start", CAM_ARG_STARTSTOP | CAM_ARG_START_UNIT, NULL},
{"stop", CAM_ARG_STARTSTOP, NULL},
{"eject", CAM_ARG_STARTSTOP | CAM_ARG_EJECT, NULL},
{"rescan", CAM_ARG_RESCAN, NULL},
{"cmd", CAM_ARG_SCSI_CMD, scsicmd_opts},
{"command", CAM_ARG_SCSI_CMD, scsicmd_opts},
{"defects", CAM_ARG_READ_DEFECTS, readdefect_opts},
{"defectlist", CAM_ARG_READ_DEFECTS, readdefect_opts},
{"devlist", CAM_ARG_DEVTREE, NULL},
{"periphlist", CAM_ARG_DEVLIST, NULL},
{"modepage", CAM_ARG_MODE_PAGE, "dem:P:"},
{"debug", CAM_ARG_DEBUG, "ITSc"},
{"help", CAM_ARG_USAGE, NULL},
{"-?", CAM_ARG_USAGE, NULL},
{"-h", CAM_ARG_USAGE, NULL},
{NULL, 0, NULL}
};
typedef enum {
CC_OR_NOT_FOUND,
CC_OR_AMBIGUOUS,
CC_OR_FOUND
} camcontrol_optret;
cam_argmask arglist;
camcontrol_optret getoption(char *arg, cam_argmask *argnum, char **subopt);
static int getdevlist(struct cam_device *device);
static int getdevtree(void);
static int testunitready(struct cam_device *device, int retry_count,
int timeout);
static int scsistart(struct cam_device *device, int startstop, int loadeject,
int retry_count, int timeout);
static int scsidoinquiry(struct cam_device *device, int argc, char **argv,
char *combinedopt, int retry_count, int timeout);
static int scsiinquiry(struct cam_device *device, int retry_count, int timeout);
static int scsiserial(struct cam_device *device, int retry_count, int timeout);
static int scsixferrate(struct cam_device *device);
static int dorescan(int argc, char **argv);
static int rescanbus(int bus);
static int scanlun(int bus, int target, int lun);
static int readdefects(struct cam_device *device, int argc, char **argv,
char *combinedopt, int retry_count, int timeout);
static void modepage(struct cam_device *device, int argc, char **argv,
char *combinedopt, int retry_count, int timeout);
static int scsicmd(struct cam_device *device, int argc, char **argv,
char *combinedopt, int retry_count, int timeout);
camcontrol_optret
getoption(char *arg, cam_argmask *argnum, char **subopt)
{
struct camcontrol_opts *opts;
int num_matches = 0;
for (opts = option_table; (opts != NULL) && (opts->optname != NULL);
opts++) {
if (strncmp(opts->optname, arg, strlen(arg)) == 0) {
*argnum = opts->argnum;
*subopt = (char *)opts->subopt;
if (++num_matches > 1)
return(CC_OR_AMBIGUOUS);
}
}
if (num_matches > 0)
return(CC_OR_FOUND);
else
return(CC_OR_NOT_FOUND);
}
static int
getdevlist(struct cam_device *device)
{
union ccb *ccb;
char status[32];
int error = 0;
ccb = cam_getccb(device);
ccb->ccb_h.func_code = XPT_GDEVLIST;
ccb->ccb_h.flags = CAM_DIR_NONE;
ccb->ccb_h.retry_count = 1;
ccb->cgdl.index = 0;
ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS;
while (ccb->cgdl.status == CAM_GDEVLIST_MORE_DEVS) {
if (cam_send_ccb(device, ccb) < 0) {
perror("error getting device list");
cam_freeccb(ccb);
return(1);
}
status[0] = '\0';
switch (ccb->cgdl.status) {
case CAM_GDEVLIST_MORE_DEVS:
strcpy(status, "MORE");
break;
case CAM_GDEVLIST_LAST_DEVICE:
strcpy(status, "LAST");
break;
case CAM_GDEVLIST_LIST_CHANGED:
strcpy(status, "CHANGED");
break;
case CAM_GDEVLIST_ERROR:
strcpy(status, "ERROR");
error = 1;
break;
}
fprintf(stdout, "%s%d: generation: %d index: %d status: %s\n",
ccb->cgdl.periph_name,
ccb->cgdl.unit_number,
ccb->cgdl.generation,
ccb->cgdl.index,
status);
/*
* If the list has changed, we need to start over from the
* beginning.
*/
if (ccb->cgdl.status == CAM_GDEVLIST_LIST_CHANGED)
ccb->cgdl.index = 0;
}
cam_freeccb(ccb);
return(error);
}
static int
getdevtree(void)
{
union ccb ccb;
int bufsize, i, fd;
int need_close = 0;
int error = 0;
if ((fd = open(XPT_DEVICE, O_RDWR)) == -1) {
warn("couldn't open %s", XPT_DEVICE);
return(1);
}
bzero(&(&ccb.ccb_h)[1], sizeof(struct ccb_dev_match));
ccb.ccb_h.func_code = XPT_DEV_MATCH;
bufsize = sizeof(struct dev_match_result) * 100;
ccb.cdm.match_buf_len = bufsize;
ccb.cdm.matches = (struct dev_match_result *)malloc(bufsize);
ccb.cdm.num_matches = 0;
/*
* We fetch all nodes, since we display most of them in the default
* case, and all in the verbose case.
*/
ccb.cdm.num_patterns = 0;
ccb.cdm.pattern_buf_len = 0;
/*
* We do the ioctl multiple times if necessary, in case there are
* more than 100 nodes in the EDT.
*/
do {
if (ioctl(fd, CAMIOCOMMAND, &ccb) == -1) {
warn("error sending CAMIOCOMMAND ioctl");
error = 1;
break;
}
if ((ccb.ccb_h.status != CAM_REQ_CMP)
|| ((ccb.cdm.status != CAM_DEV_MATCH_LAST)
&& (ccb.cdm.status != CAM_DEV_MATCH_MORE))) {
fprintf(stderr, "got CAM error %#x, CDM error %d\n",
ccb.ccb_h.status, ccb.cdm.status);
error = 1;
break;
}
for (i = 0; i < ccb.cdm.num_matches; i++) {
switch(ccb.cdm.matches[i].type) {
case DEV_MATCH_BUS: {
struct bus_match_result *bus_result;
/*
* Only print the bus information if the
* user turns on the verbose flag.
*/
if ((arglist & CAM_ARG_VERBOSE) == 0)
break;
bus_result =
&ccb.cdm.matches[i].result.bus_result;
if (need_close) {
fprintf(stdout, ")\n");
need_close = 0;
}
fprintf(stdout, "scbus%d on %s%d bus %d:\n",
bus_result->path_id,
bus_result->dev_name,
bus_result->unit_number,
bus_result->bus_id);
break;
}
case DEV_MATCH_DEVICE: {
struct device_match_result *dev_result;
char vendor[16], product[48], revision[16];
char tmpstr[256];
dev_result =
&ccb.cdm.matches[i].result.device_result;
cam_strvis(vendor, dev_result->inq_data.vendor,
sizeof(dev_result->inq_data.vendor),
sizeof(vendor));
cam_strvis(product,
dev_result->inq_data.product,
sizeof(dev_result->inq_data.product),
sizeof(product));
cam_strvis(revision,
dev_result->inq_data.revision,
sizeof(dev_result->inq_data.revision),
sizeof(revision));
sprintf(tmpstr, "<%s %s %s>", vendor, product,
revision);
if (need_close) {
fprintf(stdout, ")\n");
need_close = 0;
}
fprintf(stdout, "%-33s at scbus%d "
"target %d lun %d (",
tmpstr,
dev_result->path_id,
dev_result->target_id,
dev_result->target_lun);
break;
}
case DEV_MATCH_PERIPH: {
struct periph_match_result *periph_result;
periph_result =
&ccb.cdm.matches[i].result.periph_result;
if (need_close)
fprintf(stdout, ",");
fprintf(stdout, "%s%d",
periph_result->periph_name,
periph_result->unit_number);
need_close = 1;
break;
}
default:
fprintf(stdout, "unknown match type\n");
break;
}
}
} while ((ccb.ccb_h.status == CAM_REQ_CMP)
&& (ccb.cdm.status == CAM_DEV_MATCH_MORE));
if (need_close)
fprintf(stdout, ")\n");
close(fd);
return(error);
}
static int
testunitready(struct cam_device *device, int retry_count, int timeout)
{
int error = 0;
union ccb *ccb;
ccb = cam_getccb(device);
scsi_test_unit_ready(&ccb->csio,
/* retries */ retry_count,
/* cbfcnp */ NULL,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ timeout ? timeout : 5000);
/* Disable freezing the device queue */
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
if (arglist & CAM_ARG_ERR_RECOVER)
ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER;
if (cam_send_ccb(device, ccb) < 0) {
perror("error sending test unit ready");
if (arglist & CAM_ARG_VERBOSE) {
if ((ccb->ccb_h.status & CAM_STATUS_MASK) ==
CAM_SCSI_STATUS_ERROR)
scsi_sense_print(device, &ccb->csio, stderr);
else
fprintf(stderr, "CAM status is %#x\n",
ccb->ccb_h.status);
}
cam_freeccb(ccb);
return(1);
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)
fprintf(stdout, "Unit is ready\n");
else {
fprintf(stdout, "Unit is not ready\n");
error = 1;
if (arglist & CAM_ARG_VERBOSE) {
if ((ccb->ccb_h.status & CAM_STATUS_MASK) ==
CAM_SCSI_STATUS_ERROR)
scsi_sense_print(device, &ccb->csio, stderr);
else
fprintf(stderr, "CAM status is %#x\n",
ccb->ccb_h.status);
}
}
cam_freeccb(ccb);
return(error);
}
static int
scsistart(struct cam_device *device, int startstop, int loadeject,
int retry_count, int timeout)
{
union ccb *ccb;
int error = 0;
if ((startstop < 0) || (startstop > 1)) {
warnx("SCSI start/stop argument must be 0 or 1");
return(1);
}
ccb = cam_getccb(device);
scsi_start_stop(&ccb->csio,
/* retries */ retry_count,
/* cbfcnp */ NULL,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* start/stop */ startstop,
/* load_eject */ loadeject,
/* immediate */ 0,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ timeout ? timeout : 120000);
/* Disable freezing the device queue */
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
if (arglist & CAM_ARG_ERR_RECOVER)
ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER;
if (cam_send_ccb(device, ccb) < 0) {
perror("error sending start unit");
if (arglist & CAM_ARG_VERBOSE) {
if ((ccb->ccb_h.status & CAM_STATUS_MASK) ==
CAM_SCSI_STATUS_ERROR)
scsi_sense_print(device, &ccb->csio, stderr);
else
fprintf(stderr, "CAM status is %#x\n",
ccb->ccb_h.status);
}
cam_freeccb(ccb);
return(1);
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)
if (startstop) {
fprintf(stdout, "Unit started successfully");
if (loadeject)
fprintf(stdout,", Media loaded\n");
else
fprintf(stdout,"\n");
} else {
fprintf(stdout, "Unit stopped successfully");
if (loadeject)
fprintf(stdout, ", Media ejected\n");
else
fprintf(stdout, "\n");
}
else {
error = 1;
if (startstop)
fprintf(stdout,
"Error received from start unit command\n");
else
fprintf(stdout,
"Error received from stop unit command\n");
if (arglist & CAM_ARG_VERBOSE) {
if ((ccb->ccb_h.status & CAM_STATUS_MASK) ==
CAM_SCSI_STATUS_ERROR)
scsi_sense_print(device, &ccb->csio, stderr);
else
fprintf(stderr, "CAM status is %#x\n",
ccb->ccb_h.status);
}
}
cam_freeccb(ccb);
return(error);
}
static int
scsidoinquiry(struct cam_device *device, int argc, char **argv,
char *combinedopt, int retry_count, int timeout)
{
int c;
int error = 0;
while ((c = getopt(argc, argv, combinedopt)) != -1) {
switch(c) {
case 'D':
arglist |= CAM_ARG_GET_STDINQ;
break;
case 'R':
arglist |= CAM_ARG_GET_XFERRATE;
break;
case 'S':
arglist |= CAM_ARG_GET_SERIAL;
break;
default:
break;
}
}
/*
* If the user didn't specify any inquiry options, he wants all of
* them.
*/
if ((arglist & CAM_ARG_INQ_MASK) == 0)
arglist |= CAM_ARG_INQ_MASK;
if (arglist & CAM_ARG_GET_STDINQ)
error = scsiinquiry(device, retry_count, timeout);
if (error != 0)
return(error);
if (arglist & CAM_ARG_GET_SERIAL)
scsiserial(device, retry_count, timeout);
if (error != 0)
return(error);
if (arglist & CAM_ARG_GET_XFERRATE)
error = scsixferrate(device);
return(error);
}
static int
scsiinquiry(struct cam_device *device, int retry_count, int timeout)
{
union ccb *ccb;
struct scsi_inquiry_data *inq_buf;
int error = 0;
ccb = cam_getccb(device);
if (ccb == NULL) {
warnx("couldn't allocate CCB");
return(1);
}
/* cam_getccb cleans up the header, caller has to zero the payload */
bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio));
inq_buf = (struct scsi_inquiry_data *)malloc(
sizeof(struct scsi_inquiry_data));
if (inq_buf == NULL) {
cam_freeccb(ccb);
warnx("can't malloc memory for inquiry\n");
return(1);
}
bzero(inq_buf, sizeof(*inq_buf));
scsi_inquiry(&ccb->csio,
/* retries */ retry_count,
/* cbfcnp */ NULL,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* inq_buf */ (u_int8_t *)inq_buf,
/* inq_len */ sizeof(struct scsi_inquiry_data),
/* evpd */ 0,
/* page_code */ 0,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ timeout ? timeout : 5000);
/* Disable freezing the device queue */
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
if (arglist & CAM_ARG_ERR_RECOVER)
ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER;
if (cam_send_ccb(device, ccb) < 0) {
perror("error sending SCSI inquiry");
if (arglist & CAM_ARG_VERBOSE) {
if ((ccb->ccb_h.status & CAM_STATUS_MASK) ==
CAM_SCSI_STATUS_ERROR)
scsi_sense_print(device, &ccb->csio, stderr);
else
fprintf(stderr, "CAM status is %#x\n",
ccb->ccb_h.status);
}
cam_freeccb(ccb);
return(1);
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
error = 1;
if (arglist & CAM_ARG_VERBOSE) {
if ((ccb->ccb_h.status & CAM_STATUS_MASK) ==
CAM_SCSI_STATUS_ERROR)
scsi_sense_print(device, &ccb->csio, stderr);
else
fprintf(stderr, "CAM status is %#x\n",
ccb->ccb_h.status);
}
}
cam_freeccb(ccb);
if (error != 0) {
free(inq_buf);
return(error);
}
scsi_print_inquiry(inq_buf);
free(inq_buf);
if (arglist & CAM_ARG_GET_SERIAL)
fprintf(stdout, "Serial Number ");
return(0);
}
static int
scsiserial(struct cam_device *device, int retry_count, int timeout)
{
union ccb *ccb;
struct scsi_vpd_unit_serial_number *serial_buf;
char serial_num[SVPD_SERIAL_NUM_SIZE + 1];
int error = 0;
ccb = cam_getccb(device);
if (ccb == NULL) {
warnx("couldn't allocate CCB");
return(1);
}
/* cam_getccb cleans up the header, caller has to zero the payload */
bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio));
serial_buf = (struct scsi_vpd_unit_serial_number *)
malloc(sizeof(*serial_buf));
if (serial_buf == NULL) {
cam_freeccb(ccb);
warnx("can't malloc memory for serial number");
return(1);
}
scsi_inquiry(&ccb->csio,
/*retries*/ retry_count,
/*cbfcnp*/ NULL,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* inq_buf */ (u_int8_t *)serial_buf,
/* inq_len */ sizeof(*serial_buf),
/* evpd */ 1,
/* page_code */ SVPD_UNIT_SERIAL_NUMBER,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ timeout ? timeout : 5000);
/* Disable freezing the device queue */
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
if (arglist & CAM_ARG_ERR_RECOVER)
ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER;
if (cam_send_ccb(device, ccb) < 0) {
warn("error getting serial number");
if (arglist & CAM_ARG_VERBOSE) {
if ((ccb->ccb_h.status & CAM_STATUS_MASK) ==
CAM_SCSI_STATUS_ERROR)
scsi_sense_print(device, &ccb->csio, stderr);
else
fprintf(stderr, "CAM status is %#x\n",
ccb->ccb_h.status);
}
cam_freeccb(ccb);
free(serial_buf);
return(1);
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
error = 1;
if (arglist & CAM_ARG_VERBOSE) {
if ((ccb->ccb_h.status & CAM_STATUS_MASK) ==
CAM_SCSI_STATUS_ERROR)
scsi_sense_print(device, &ccb->csio, stderr);
else
fprintf(stderr, "CAM status is %#x\n",
ccb->ccb_h.status);
}
}
cam_freeccb(ccb);
if (error != 0) {
free(serial_buf);
return(error);
}
bcopy(serial_buf->serial_num, serial_num, serial_buf->length);
serial_num[serial_buf->length] = '\0';
if (((arglist & CAM_ARG_GET_STDINQ) == 0)
&& (arglist & CAM_ARG_GET_XFERRATE))
fprintf(stdout, "Serial Number ");
fprintf(stdout, "%.60s\n", serial_num);
free(serial_buf);
return(0);
}
static int
scsixferrate(struct cam_device *device)
{
u_int32_t freq;
u_int32_t speed;
if (device->sync_period != 0)
freq = scsi_calc_syncsrate(device->sync_period);
else
freq = 0;
speed = freq;
speed *= (0x01 << device->bus_width);
fprintf(stdout, "%d.%dMB/s transfers ", speed / 1000, speed % 1000);
if (device->sync_period != 0)
fprintf(stdout, "(%d.%dMHz, offset %d", freq / 1000,
freq % 1000, device->sync_offset);
if (device->bus_width != 0) {
if (device->sync_period == 0)
fprintf(stdout, "(");
else
fprintf(stdout, ", ");
fprintf(stdout, "%dbit)", 8 * (0x01 << device->bus_width));
} else if (device->sync_period != 0)
fprintf(stdout, ")");
if (device->inq_data.flags & SID_CmdQue)
fprintf(stdout, ", Tagged Queueing Enabled");
fprintf(stdout, "\n");
return(0);
}
static int
dorescan(int argc, char **argv)
{
int error = 0;
int bus = -1, target = -1, lun = -1;
char *tstr, *tmpstr = NULL;
if (argc < 3) {
warnx("you must specify a bus, or a bus:target:lun to rescan");
return(1);
}
/*
* Parse out a bus, or a bus, target and lun in the following
* format:
* bus
* bus:target:lun
* It is an error to specify a bus and target, but not a lun.
*/
tstr = argv[optind];
while (isspace(*tstr) && (*tstr != '\0'))
tstr++;
tmpstr = (char *)strtok(tstr, ":");
if ((tmpstr != NULL) && (*tmpstr != '\0')){
bus = strtol(tmpstr, NULL, 0);
arglist |= CAM_ARG_BUS;
tmpstr = (char *)strtok(NULL, ":");
if ((tmpstr != NULL) && (*tmpstr != '\0')){
target = strtol(tmpstr, NULL, 0);
arglist |= CAM_ARG_TARGET;
tmpstr = (char *)strtok(NULL, ":");
if ((tmpstr != NULL) && (*tmpstr != '\0')){
lun = strtol(tmpstr, NULL, 0);
arglist |= CAM_ARG_LUN;
} else {
error = 1;
warnx("you must specify either a bus or");
warnx("a bus, target and lun for rescanning");
}
}
} else {
error = 1;
warnx("you must at least specify a bus to rescan");
}
if (error == 0) {
if ((arglist & CAM_ARG_BUS)
&& (arglist & CAM_ARG_TARGET)
&& (arglist & CAM_ARG_LUN))
error = scanlun(bus, target, lun);
else if (arglist & CAM_ARG_BUS)
error = rescanbus(bus);
else {
error = 1;
warnx("you must specify either a bus or");
warnx("a bus, target and lun for rescanning");
}
}
return(error);
}
static int
rescanbus(int bus)
{
union ccb ccb;
int fd;
if (bus < 0) {
warnx("invalid bus number %d", bus);
return(1);
}
if ((fd = open(XPT_DEVICE, O_RDWR)) < 0) {
warnx("error opening tranport layer device %s", XPT_DEVICE);
warn("%s", XPT_DEVICE);
return(1);
}
ccb.ccb_h.func_code = XPT_SCAN_BUS;
ccb.ccb_h.path_id = bus;
ccb.ccb_h.target_id = CAM_TARGET_WILDCARD;
ccb.ccb_h.target_lun = CAM_LUN_WILDCARD;
ccb.crcn.flags = CAM_FLAG_NONE;
/* run this at a low priority */
ccb.ccb_h.pinfo.priority = 5;
if (ioctl(fd, CAMIOCOMMAND, &ccb) == -1) {
warn("CAMIOCOMMAND ioctl failed");
close(fd);
return(1);
}
close(fd);
if ((ccb.ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
fprintf(stdout, "Re-scan of bus %d was successful\n", bus);
return(0);
} else {
fprintf(stdout, "Re-scan of bus %d returned error %#x\n",
bus, ccb.ccb_h.status & CAM_STATUS_MASK);
return(1);
}
}
static int
scanlun(int bus, int target, int lun)
{
union ccb ccb;
int fd;
if (bus < 0) {
warnx("invalid bus number %d", bus);
return(1);
}
if (target < 0) {
warnx("invalid target number %d", target);
return(1);
}
if (lun < 0) {
warnx("invalid lun number %d", lun);
return(1);
}
if ((fd = open(XPT_DEVICE, O_RDWR)) < 0) {
warnx("error opening tranport layer device %s\n",
XPT_DEVICE);
warn("%s", XPT_DEVICE);
return(1);
}
ccb.ccb_h.func_code = XPT_SCAN_LUN;
ccb.ccb_h.path_id = bus;
ccb.ccb_h.target_id = target;
ccb.ccb_h.target_lun = lun;
ccb.crcn.flags = CAM_FLAG_NONE;
/* run this at a low priority */
ccb.ccb_h.pinfo.priority = 5;
if (ioctl(fd, CAMIOCOMMAND, &ccb) < 0) {
warn("CAMIOCOMMAND ioctl failed");
close(fd);
return(1);
}
close(fd);
if ((ccb.ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
fprintf(stdout, "Re-scan of %d:%d:%d was successful\n",
bus, target, lun);
return(0);
} else {
fprintf(stdout, "Re-scan of %d:%d:%d returned error %#x\n",
bus, target, lun, ccb.ccb_h.status & CAM_STATUS_MASK);
return(1);
}
}
static int
readdefects(struct cam_device *device, int argc, char **argv,
char *combinedopt, int retry_count, int timeout)
{
union ccb *ccb = NULL;
struct scsi_read_defect_data_10 *rdd_cdb;
u_int8_t *defect_list = NULL;
u_int32_t dlist_length = 65000;
u_int32_t returned_length = 0;
u_int32_t num_returned = 0;
u_int8_t returned_format;
register int i;
int c, error = 0;
int lists_specified = 0;
while ((c = getopt(argc, argv, combinedopt)) != -1) {
switch(c){
case 'f':
{
char *tstr;
tstr = optarg;
while (isspace(*tstr) && (*tstr != '\0'))
tstr++;
if (strcmp(tstr, "block") == 0)
arglist |= CAM_ARG_FORMAT_BLOCK;
else if (strcmp(tstr, "bfi") == 0)
arglist |= CAM_ARG_FORMAT_BFI;
else if (strcmp(tstr, "phys") == 0)
arglist |= CAM_ARG_FORMAT_PHYS;
else {
error = 1;
warnx("invalid defect format %s", tstr);
goto defect_bailout;
}
break;
}
case 'G':
arglist |= CAM_ARG_GLIST;
break;
case 'P':
arglist |= CAM_ARG_PLIST;
break;
default:
break;
}
}
ccb = cam_getccb(device);
/*
* Hopefully 65000 bytes is enough to hold the defect list. If it
* isn't, the disk is probably dead already. We'd have to go with
* 12 byte command (i.e. alloc_length is 32 bits instead of 16)
* to hold them all.
*/
defect_list = malloc(dlist_length);
rdd_cdb =(struct scsi_read_defect_data_10 *)&ccb->csio.cdb_io.cdb_bytes;
/*
* cam_getccb() zeros the CCB header only. So we need to zero the
* payload portion of the ccb.
*/
bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio));
cam_fill_csio(&ccb->csio,
/*retries*/ retry_count,
/*cbfcnp*/ NULL,
/*flags*/ CAM_DIR_IN | (arglist & CAM_ARG_ERR_RECOVER) ?
CAM_PASS_ERR_RECOVER : 0,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*data_ptr*/ defect_list,
/*dxfer_len*/ dlist_length,
/*sense_len*/ SSD_FULL_SIZE,
/*cdb_len*/ sizeof(struct scsi_read_defect_data_10),
/*timeout*/ timeout ? timeout : 5000);
rdd_cdb->opcode = READ_DEFECT_DATA_10;
if (arglist & CAM_ARG_FORMAT_BLOCK)
rdd_cdb->format = SRDD10_BLOCK_FORMAT;
else if (arglist & CAM_ARG_FORMAT_BFI)
rdd_cdb->format = SRDD10_BYTES_FROM_INDEX_FORMAT;
else if (arglist & CAM_ARG_FORMAT_PHYS)
rdd_cdb->format = SRDD10_PHYSICAL_SECTOR_FORMAT;
else {
error = 1;
warnx("no defect list format specified");
goto defect_bailout;
}
if (arglist & CAM_ARG_PLIST) {
rdd_cdb->format |= SRDD10_PLIST;
lists_specified++;
}
if (arglist & CAM_ARG_GLIST) {
rdd_cdb->format |= SRDD10_GLIST;
lists_specified++;
}
scsi_ulto2b(dlist_length, rdd_cdb->alloc_length);
/* Disable freezing the device queue */
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
if (cam_send_ccb(device, ccb) < 0) {
perror("error reading defect list");
if (arglist & CAM_ARG_VERBOSE) {
if ((ccb->ccb_h.status & CAM_STATUS_MASK) ==
CAM_SCSI_STATUS_ERROR)
scsi_sense_print(device, &ccb->csio, stderr);
else
fprintf(stderr, "CAM status is %#x\n",
ccb->ccb_h.status);
}
error = 1;
goto defect_bailout;
}
if (arglist & CAM_ARG_VERBOSE)
scsi_sense_print(device, &ccb->csio, stderr);
returned_length = scsi_2btoul(((struct
scsi_read_defect_data_hdr_10 *)defect_list)->length);
returned_format = ((struct scsi_read_defect_data_hdr_10 *)
defect_list)->format;
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
struct scsi_sense_data *sense;
int error_code, sense_key, asc, ascq;
sense = &ccb->csio.sense_data;
scsi_extract_sense(sense, &error_code, &sense_key, &asc, &ascq);
/*
* According to the SCSI spec, if the disk doesn't support
* the requested format, it will generally return a sense
* key of RECOVERED ERROR, and an additional sense code
* of "DEFECT LIST NOT FOUND". So, we check for that, and
* also check to make sure that the returned length is
* greater than 0, and then print out whatever format the
* disk gave us.
*/
if ((sense_key == SSD_KEY_RECOVERED_ERROR)
&& (asc == 0x1c) && (ascq == 0x00)
&& (returned_length > 0)) {
warnx("requested defect format not available");
switch(returned_format & SRDDH10_DLIST_FORMAT_MASK) {
case SRDD10_BLOCK_FORMAT:
warnx("Device returned block format");
break;
case SRDD10_BYTES_FROM_INDEX_FORMAT:
warnx("Device returned bytes from index"
" format");
break;
case SRDD10_PHYSICAL_SECTOR_FORMAT:
warnx("Device returned physical sector format");
break;
default:
error = 1;
warnx("Device returned unknown defect"
" data format %#x", returned_format);
goto defect_bailout;
break; /* NOTREACHED */
}
} else {
error = 1;
warnx("Error returned from read defect data command");
goto defect_bailout;
}
}
/*
* XXX KDM I should probably clean up the printout format for the
* disk defects.
*/
switch (returned_format & SRDDH10_DLIST_FORMAT_MASK){
case SRDDH10_PHYSICAL_SECTOR_FORMAT:
{
struct scsi_defect_desc_phys_sector *dlist;
dlist = (struct scsi_defect_desc_phys_sector *)
(defect_list +
sizeof(struct scsi_read_defect_data_hdr_10));
num_returned = returned_length /
sizeof(struct scsi_defect_desc_phys_sector);
fprintf(stderr, "Got %d defect", num_returned);
if ((lists_specified == 0) || (num_returned == 0)) {
fprintf(stderr, "s.\n");
break;
} else if (num_returned == 1)
fprintf(stderr, ":\n");
else
fprintf(stderr, "s:\n");
for (i = 0; i < num_returned; i++) {
fprintf(stdout, "%d:%d:%d\n",
scsi_3btoul(dlist[i].cylinder),
dlist[i].head,
scsi_4btoul(dlist[i].sector));
}
break;
}
case SRDDH10_BYTES_FROM_INDEX_FORMAT:
{
struct scsi_defect_desc_bytes_from_index *dlist;
dlist = (struct scsi_defect_desc_bytes_from_index *)
(defect_list +
sizeof(struct scsi_read_defect_data_hdr_10));
num_returned = returned_length /
sizeof(struct scsi_defect_desc_bytes_from_index);
fprintf(stderr, "Got %d defect", num_returned);
if ((lists_specified == 0) || (num_returned == 0)) {
fprintf(stderr, "s.\n");
break;
} else if (num_returned == 1)
fprintf(stderr, ":\n");
else
fprintf(stderr, "s:\n");
for (i = 0; i < num_returned; i++) {
fprintf(stdout, "%d:%d:%d\n",
scsi_3btoul(dlist[i].cylinder),
dlist[i].head,
scsi_4btoul(dlist[i].bytes_from_index));
}
break;
}
case SRDDH10_BLOCK_FORMAT:
{
struct scsi_defect_desc_block *dlist;
dlist = (struct scsi_defect_desc_block *)(defect_list +
sizeof(struct scsi_read_defect_data_hdr_10));
num_returned = returned_length /
sizeof(struct scsi_defect_desc_block);
fprintf(stderr, "Got %d defect", num_returned);
if ((lists_specified == 0) || (num_returned == 0)) {
fprintf(stderr, "s.\n");
break;
} else if (num_returned == 1)
fprintf(stderr, ":\n");
else
fprintf(stderr, "s:\n");
for (i = 0; i < num_returned; i++)
fprintf(stdout, "%u\n",
scsi_4btoul(dlist[i].address));
break;
}
default:
fprintf(stderr, "Unknown defect format %d\n",
returned_format & SRDDH10_DLIST_FORMAT_MASK);
error = 1;
break;
}
defect_bailout:
if (defect_list != NULL)
free(defect_list);
if (ccb != NULL)
cam_freeccb(ccb);
return(error);
}
#if 0
void
reassignblocks(struct cam_device *device, u_int32_t *blocks, int num_blocks)
{
union ccb *ccb;
ccb = cam_getccb(device);
cam_freeccb(ccb);
}
#endif
void
mode_sense(struct cam_device *device, int mode_page, int page_control,
int dbd, int retry_count, int timeout, u_int8_t *data, int datalen)
{
union ccb *ccb;
int retval;
ccb = cam_getccb(device);
if (ccb == NULL)
errx(1, "mode_sense: couldn't allocate CCB");
bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio));
scsi_mode_sense(&ccb->csio,
/* retries */ retry_count,
/* cbfcnp */ NULL,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* dbd */ dbd,
/* page_code */ page_control << 6,
/* page */ mode_page,
/* param_buf */ data,
/* param_len */ datalen,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ timeout ? timeout : 5000);
if (arglist & CAM_ARG_ERR_RECOVER)
ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER;
/* Disable freezing the device queue */
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
if (((retval = cam_send_ccb(device, ccb)) < 0)
|| ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)) {
if (arglist & CAM_ARG_VERBOSE) {
if ((ccb->ccb_h.status & CAM_STATUS_MASK) ==
CAM_SCSI_STATUS_ERROR)
scsi_sense_print(device, &ccb->csio, stderr);
else
fprintf(stderr, "CAM status is %#x\n",
ccb->ccb_h.status);
}
cam_freeccb(ccb);
cam_close_device(device);
if (retval < 0)
err(1, "error sending mode sense command");
else
errx(1, "error sending mode sense command");
}
cam_freeccb(ccb);
}
void
mode_select(struct cam_device *device, int save_pages, int retry_count,
int timeout, u_int8_t *data, int datalen)
{
union ccb *ccb;
int retval;
ccb = cam_getccb(device);
if (ccb == NULL)
errx(1, "mode_select: couldn't allocate CCB");
bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio));
scsi_mode_select(&ccb->csio,
/* retries */ retry_count,
/* cbfcnp */ NULL,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* scsi_page_fmt */ 1,
/* save_pages */ save_pages,
/* param_buf */ data,
/* param_len */ datalen,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ timeout ? timeout : 5000);
if (arglist & CAM_ARG_ERR_RECOVER)
ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER;
/* Disable freezing the device queue */
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
if (((retval = cam_send_ccb(device, ccb)) < 0)
|| ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)) {
if (arglist & CAM_ARG_VERBOSE) {
if ((ccb->ccb_h.status & CAM_STATUS_MASK) ==
CAM_SCSI_STATUS_ERROR)
scsi_sense_print(device, &ccb->csio, stderr);
else
fprintf(stderr, "CAM status is %#x\n",
ccb->ccb_h.status);
}
cam_freeccb(ccb);
cam_close_device(device);
if (retval < 0)
err(1, "error sending mode select command");
else
errx(1, "error sending mode select command");
}
cam_freeccb(ccb);
}
void
modepage(struct cam_device *device, int argc, char **argv, char *combinedopt,
int retry_count, int timeout)
{
int c, mode_page = -1, page_control = 0;
while ((c = getopt(argc, argv, combinedopt)) != -1) {
switch(c) {
case 'd':
arglist |= CAM_ARG_DBD;
break;
case 'e':
arglist |= CAM_ARG_MODE_EDIT;
break;
case 'm':
mode_page = strtol(optarg, NULL, 0);
if (mode_page < 0)
errx(1, "invalid mode page %d", mode_page);
break;
case 'P':
page_control = strtol(optarg, NULL, 0);
if ((page_control < 0) || (page_control > 3))
errx(1, "invalid page control field %d",
page_control);
arglist |= CAM_ARG_PAGE_CNTL;
break;
default:
break;
}
}
if (mode_page == -1)
errx(1, "you must specify a mode page!");
mode_edit(device, mode_page, page_control, arglist & CAM_ARG_DBD,
arglist & CAM_ARG_MODE_EDIT, retry_count, timeout);
}
static int
scsicmd(struct cam_device *device, int argc, char **argv, char *combinedopt,
int retry_count, int timeout)
{
union ccb *ccb;
u_int32_t flags = CAM_DIR_NONE;
u_int8_t *data_ptr = NULL;
u_int8_t cdb[20];
struct get_hook hook;
int c, data_bytes = 0;
int cdb_len = 0;
char *datastr = NULL, *tstr;
int error = 0;
int fd_data = 0;
int retval;
ccb = cam_getccb(device);
if (ccb == NULL) {
warnx("scsicmd: error allocating ccb");
return(1);
}
bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio));
while ((c = getopt(argc, argv, combinedopt)) != -1) {
switch(c) {
case 'c':
tstr = optarg;
while (isspace(*tstr) && (*tstr != '\0'))
tstr++;
hook.argc = argc - optind;
hook.argv = argv + optind;
hook.got = 0;
buff_encode_visit(cdb, sizeof(cdb), tstr,
iget, &hook);
/*
* Increment optind by the number of arguments the
* encoding routine processed. After each call to
* getopt(3), optind points to the argument that
* getopt should process _next_. In this case,
* that means it points to the first command string
* argument, if there is one. Once we increment
* this, it should point to either the next command
* line argument, or it should be past the end of
* the list.
*/
optind += hook.got;
break;
case 'i':
if (arglist & CAM_ARG_CMD_OUT) {
warnx("command must either be "
"read or write, not both");
error = 1;
goto scsicmd_bailout;
}
arglist |= CAM_ARG_CMD_IN;
flags = CAM_DIR_IN;
data_bytes = strtol(optarg, NULL, 0);
if (data_bytes <= 0) {
warnx("invalid number of input bytes %d",
data_bytes);
error = 1;
goto scsicmd_bailout;
}
hook.argc = argc - optind;
hook.argv = argv + optind;
hook.got = 0;
optind++;
datastr = cget(&hook, NULL);
/*
* If the user supplied "-" instead of a format, he
* wants the data to be written to stdout.
*/
if ((datastr != NULL)
&& (datastr[0] == '-'))
fd_data = 1;
data_ptr = (u_int8_t *)malloc(data_bytes);
break;
case 'o':
if (arglist & CAM_ARG_CMD_IN) {
warnx("command must either be "
"read or write, not both");
error = 1;
goto scsicmd_bailout;
}
arglist |= CAM_ARG_CMD_OUT;
flags = CAM_DIR_OUT;
data_bytes = strtol(optarg, NULL, 0);
if (data_bytes <= 0) {
warnx("invalid number of output bytes %d",
data_bytes);
error = 1;
goto scsicmd_bailout;
}
hook.argc = argc - optind;
hook.argv = argv + optind;
hook.got = 0;
datastr = cget(&hook, NULL);
data_ptr = (u_int8_t *)malloc(data_bytes);
/*
* If the user supplied "-" instead of a format, he
* wants the data to be read from stdin.
*/
if ((datastr != NULL)
&& (datastr[0] == '-'))
fd_data = 1;
else
buff_encode_visit(data_ptr, data_bytes, datastr,
iget, &hook);
optind += hook.got;
break;
default:
break;
}
}
/*
* If fd_data is set, and we're writing to the device, we need to
* read the data the user wants written from stdin.
*/
if ((fd_data == 1) && (arglist & CAM_ARG_CMD_OUT)) {
size_t amt_read;
int amt_to_read = data_bytes;
u_int8_t *buf_ptr = data_ptr;
for (amt_read = 0; amt_to_read > 0;
amt_read = read(0, buf_ptr, amt_to_read)) {
if (amt_read == -1) {
warn("error reading data from stdin");
error = 1;
goto scsicmd_bailout;
}
amt_to_read -= amt_read;
buf_ptr += amt_read;
}
}
if (arglist & CAM_ARG_ERR_RECOVER)
flags |= CAM_PASS_ERR_RECOVER;
/* Disable freezing the device queue */
flags |= CAM_DEV_QFRZDIS;
/*
* This is taken from the SCSI-3 draft spec.
* (T10/1157D revision 0.3)
* The top 3 bits of an opcode are the group code. The next 5 bits
* are the command code.
* Group 0: six byte commands
* Group 1: ten byte commands
* Group 2: ten byte commands
* Group 3: reserved
* Group 4: sixteen byte commands
* Group 5: twelve byte commands
* Group 6: vendor specific
* Group 7: vendor specific
*/
switch((cdb[0] >> 5) & 0x7) {
case 0:
cdb_len = 6;
break;
case 1:
case 2:
cdb_len = 10;
break;
case 3:
case 6:
case 7:
cdb_len = 1;
break;
case 4:
cdb_len = 16;
break;
case 5:
cdb_len = 12;
break;
}
/*
* We should probably use csio_build_visit or something like that
* here, but it's easier to encode arguments as you go. The
* alternative would be skipping the CDB argument and then encoding
* it here, since we've got the data buffer argument by now.
*/
bcopy(cdb, &ccb->csio.cdb_io.cdb_bytes, cdb_len);
cam_fill_csio(&ccb->csio,
/*retries*/ retry_count,
/*cbfcnp*/ NULL,
/*flags*/ flags,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*data_ptr*/ data_ptr,
/*dxfer_len*/ data_bytes,
/*sense_len*/ SSD_FULL_SIZE,
/*cdb_len*/ cdb_len,
/*timeout*/ timeout ? timeout : 5000);
if (((retval = cam_send_ccb(device, ccb)) < 0)
|| ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)) {
if (retval < 0)
warn("error sending command");
else
warnx("error sending command");
if (arglist & CAM_ARG_VERBOSE) {
if ((ccb->ccb_h.status & CAM_STATUS_MASK) ==
CAM_SCSI_STATUS_ERROR)
scsi_sense_print(device, &ccb->csio, stderr);
else
fprintf(stderr, "CAM status is %#x\n",
ccb->ccb_h.status);
}
error = 1;
goto scsicmd_bailout;
}
if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)
&& (arglist & CAM_ARG_CMD_IN)
&& (data_bytes > 0)) {
if (fd_data == 0) {
buff_decode_visit(data_ptr, data_bytes, datastr,
arg_put, NULL);
fprintf(stdout, "\n");
} else {
size_t amt_written;
int amt_to_write = data_bytes;
u_int8_t *buf_ptr = data_ptr;
for (amt_written = 0; (amt_to_write > 0) &&
(amt_written =write(1, buf_ptr,amt_to_write))> 0;){
amt_to_write -= amt_written;
buf_ptr += amt_written;
}
if (amt_written == -1) {
warn("error writing data to stdout");
error = 1;
goto scsicmd_bailout;
} else if ((amt_written == 0)
&& (amt_to_write > 0)) {
warnx("only wrote %u bytes out of %u",
data_bytes - amt_to_write, data_bytes);
}
}
}
scsicmd_bailout:
if ((data_bytes > 0) && (data_ptr != NULL))
free(data_ptr);
cam_freeccb(ccb);
return(error);
}
static int
camdebug(int argc, char **argv, char *combinedopt)
{
int c, fd;
int bus = -1, target = -1, lun = -1;
char *tstr, *tmpstr = NULL;
union ccb ccb;
int error = 0;
bzero(&ccb, sizeof(union ccb));
while ((c = getopt(argc, argv, combinedopt)) != -1) {
switch(c) {
case 'I':
arglist |= CAM_ARG_DEBUG_INFO;
ccb.cdbg.flags |= CAM_DEBUG_INFO;
break;
case 'S':
arglist |= CAM_ARG_DEBUG_TRACE;
ccb.cdbg.flags |= CAM_DEBUG_TRACE;
break;
case 'T':
arglist |= CAM_ARG_DEBUG_SUBTRACE;
ccb.cdbg.flags |= CAM_DEBUG_SUBTRACE;
break;
case 'c':
arglist |= CAM_ARG_DEBUG_CDB;
ccb.cdbg.flags |= CAM_DEBUG_CDB;
break;
default:
break;
}
}
if ((fd = open(XPT_DEVICE, O_RDWR)) < 0) {
warnx("error opening transport layer device %s", XPT_DEVICE);
warn("%s", XPT_DEVICE);
return(1);
}
argc -= optind;
argv += optind;
if (argc <= 0) {
warnx("you must specify \"off\", \"all\" or a bus,");
warnx("bus:target, or bus:target:lun");
close(fd);
return(1);
}
tstr = *argv;
while (isspace(*tstr) && (*tstr != '\0'))
tstr++;
if (strncmp(tstr, "off", 3) == 0) {
ccb.cdbg.flags = CAM_DEBUG_NONE;
arglist &= ~(CAM_ARG_DEBUG_INFO|CAM_ARG_DEBUG_TRACE|
CAM_ARG_DEBUG_SUBTRACE);
} else if (strncmp(tstr, "all", 3) != 0) {
tmpstr = (char *)strtok(tstr, ":");
if ((tmpstr != NULL) && (*tmpstr != '\0')){
bus = strtol(tmpstr, NULL, 0);
arglist |= CAM_ARG_BUS;
tmpstr = (char *)strtok(NULL, ":");
if ((tmpstr != NULL) && (*tmpstr != '\0')){
target = strtol(tmpstr, NULL, 0);
arglist |= CAM_ARG_TARGET;
tmpstr = (char *)strtok(NULL, ":");
if ((tmpstr != NULL) && (*tmpstr != '\0')){
lun = strtol(tmpstr, NULL, 0);
arglist |= CAM_ARG_LUN;
}
}
} else {
error = 1;
warnx("you must specify \"all\", \"off\", or a bus,");
warnx("bus:target, or bus:target:lun to debug");
}
}
if (error == 0) {
ccb.ccb_h.func_code = XPT_DEBUG;
ccb.ccb_h.path_id = bus;
ccb.ccb_h.target_id = target;
ccb.ccb_h.target_lun = lun;
if (ioctl(fd, CAMIOCOMMAND, &ccb) == -1) {
warn("CAMIOCOMMAND ioctl failed");
error = 1;
}
if (error == 0) {
if ((ccb.ccb_h.status & CAM_STATUS_MASK) ==
CAM_FUNC_NOTAVAIL) {
warnx("CAM debugging not available");
warnx("you need to put options CAMDEBUG in"
" your kernel config file!");
error = 1;
} else if ((ccb.ccb_h.status & CAM_STATUS_MASK) !=
CAM_REQ_CMP) {
warnx("XPT_DEBUG CCB failed with status %#x",
ccb.ccb_h.status);
error = 1;
} else {
if (ccb.cdbg.flags == CAM_DEBUG_NONE) {
fprintf(stderr,
"Debugging turned off\n");
} else {
fprintf(stderr,
"Debugging enabled for "
"%d:%d:%d\n",
bus, target, lun);
}
}
}
close(fd);
}
return(error);
}
void
usage(void)
{
fprintf(stderr,
"usage: camcontrol <command> [ generic args ] [ command args ]\n"
" camcontrol devlist [-v]\n"
" camcontrol periphlist [-n dev_name] [-u unit]\n"
" camcontrol tur [generic args]\n"
" camcontrol inquiry [generic args] [-D] [-S] [-R]\n"
" camcontrol start [generic args]\n"
" camcontrol stop [generic args]\n"
" camcontrol eject [generic args]\n"
" camcontrol rescan <bus[:target:lun]>\n"
" camcontrol defects [generic args] <-f format> [-P][-G]\n"
" camcontrol modepage [generic args] <-m page> [-P pagectl][-e][-d]\n"
" camcontrol cmd [generic args] <-c cmd [args]> \n"
" [-i len fmt|-o len fmt [args]]\n"
" camcontrol debug [-I][-T][-S][-c] <all|bus[:target[:lun]]|off>\n"
"Specify one of the following options:\n"
"devlist list all CAM devices\n"
"periphlist list all CAM peripheral drivers attached to a device\n"
"tur send a test unit ready to the named device\n"
"inquiry send a SCSI inquiry command to the named device\n"
"start send a Start Unit command to the device\n"
"stop send a Stop Unit command to the device\n"
"eject send a Stop Unit command to the device with the eject bit set\n"
"rescan rescan the given bus, or bus:target:lun\n"
"defects read the defect list of the specified device\n"
"modepage display or edit (-e) the given mode page\n"
"cmd send the given scsi command, may need -i or -o as well\n"
"debug turn debugging on/off for a bus, target, or lun, or all devices\n"
"Generic arguments:\n"
"-v be verbose, print out sense information\n"
"-t timeout command timeout in seconds, overrides default timeout\n"
"-n dev_name specify device name (default is %s)\n"
"-u unit specify unit number (default is %d)\n"
"-E have the kernel attempt to perform SCSI error recovery\n"
"-C count specify the SCSI command retry count (needs -E to work)\n"
"modepage arguments:\n"
"-e edit the specified mode page\n"
"-B disable block descriptors for mode sense\n"
"-P pgctl page control field 0-3\n"
"defects arguments:\n"
"-f format specify defect list format (block, bfi or phys)\n"
"-G get the grown defect list\n"
"-P get the permanant defect list\n"
"inquiry arguments:\n"
"-D get the standard inquiry data\n"
"-S get the serial number\n"
"-R get the transfer rate, etc.\n"
"cmd arguments:\n"
"-c cdb [args] specify the SCSI CDB\n"
"-i len fmt specify input data and input data format\n"
"-o len fmt [args] specify output data and output data fmt\n"
"debug arguments:\n"
"-I CAM_DEBUG_INFO -- scsi commands, errors, data\n"
"-T CAM_DEBUG_TRACE -- routine flow tracking\n"
"-S CAM_DEBUG_SUBTRACE -- internal routine command flow\n"
"-c CAM_DEBUG_CDB -- print out SCSI CDBs only\n",
DEFAULT_DEVICE, DEFAULT_UNIT);
}
int
main(int argc, char **argv)
{
int c;
char *device = NULL;
int unit = 0;
struct cam_device *cam_dev = NULL;
int timeout = 0, retry_count = 1;
camcontrol_optret optreturn;
char *tstr;
char *mainopt = "C:En:t:u:v";
char *subopt = NULL;
char combinedopt[256];
int error = 0;
arglist = CAM_ARG_NONE;
if (argc < 2) {
usage();
exit(1);
}
/*
* Get the base option.
*/
optreturn = getoption(argv[1], &arglist, &subopt);
if (optreturn == CC_OR_AMBIGUOUS) {
warnx("ambiguous option %s", argv[1]);
usage();
exit(1);
} else if (optreturn == CC_OR_NOT_FOUND) {
warnx("option %s not found", argv[1]);
usage();
exit(1);
}
/*
* Ahh, getopt(3) is a pain.
*
* This is a gross hack. There really aren't many other good
* options (excuse the pun) for parsing options in a situation like
* this. getopt is kinda braindead, so you end up having to run
* through the options twice, and give each invocation of getopt
* the option string for the other invocation.
*
* You would think that you could just have two groups of options.
* The first group would get parsed by the first invocation of
* getopt, and the second group would get parsed by the second
* invocation of getopt. It doesn't quite work out that way. When
* the first invocation of getopt finishes, it leaves optind pointing
* to the argument _after_ the first argument in the second group.
* So when the second invocation of getopt comes around, it doesn't
* recognize the first argument it gets and then bails out.
*
* A nice alternative would be to have a flag for getopt that says
* "just keep parsing arguments even when you encounter an unknown
* argument", but there isn't one. So there's no real clean way to
* easily parse two sets of arguments without having one invocation
* of getopt know about the other.
*
* Without this hack, the first invocation of getopt would work as
* long as the generic arguments are first, but the second invocation
* (in the subfunction) would fail in one of two ways. In the case
* where you don't set optreset, it would fail because optind may be
* pointing to the argument after the one it should be pointing at.
* In the case where you do set optreset, and reset optind, it would
* fail because getopt would run into the first set of options, which
* it doesn't understand.
*
* All of this would "sort of" work if you could somehow figure out
* whether optind had been incremented one option too far. The
* mechanics of that, however, are more daunting than just giving
* both invocations all of the expect options for either invocation.
*
* Needless to say, I wouldn't mind if someone invented a better
* (non-GPL!) command line parsing interface than getopt. I
* wouldn't mind if someone added more knobs to getopt to make it
* work better. Who knows, I may talk myself into doing it someday,
* if the standards weenies let me. As it is, it just leads to
* hackery like this and causes people to avoid it in some cases.
*
* KDM, September 8th, 1998
*/
if (subopt != NULL)
sprintf(combinedopt, "%s%s", mainopt, subopt);
else
sprintf(combinedopt, "%s", mainopt);
/*
* Start getopt processing at argv[2], since we've already accepted
* argv[1] as the command name.
*/
optind = 2;
/*
* Now we run through the argument list looking for generic
* options, and ignoring options that possibly belong to
* subfunctions.
*/
while ((c = getopt(argc, argv, combinedopt))!= -1){
switch(c) {
case 'C':
retry_count = strtol(optarg, NULL, 0);
if (retry_count < 0)
errx(1, "retry count %d is < 0",
retry_count);
arglist |= CAM_ARG_RETRIES;
break;
case 'E':
arglist |= CAM_ARG_ERR_RECOVER;
break;
case 'n':
arglist |= CAM_ARG_DEVICE;
tstr = optarg;
while (isspace(*tstr) && (*tstr != '\0'))
tstr++;
device = (char *)strdup(tstr);
break;
case 't':
timeout = strtol(optarg, NULL, 0);
if (timeout < 0)
errx(1, "invalid timeout %d", timeout);
/* Convert the timeout from seconds to ms */
timeout *= 1000;
arglist |= CAM_ARG_TIMEOUT;
break;
case 'u':
arglist |= CAM_ARG_UNIT;
unit = strtol(optarg, NULL, 0);
break;
case 'v':
arglist |= CAM_ARG_VERBOSE;
break;
default:
break;
}
}
if ((arglist & CAM_ARG_DEVICE) == 0)
device = (char *)strdup(DEFAULT_DEVICE);
if ((arglist & CAM_ARG_UNIT) == 0)
unit = DEFAULT_UNIT;
/*
* For most commands we'll want to open the passthrough device
* associated with the specified device. In the case of the rescan
* commands, we don't use a passthrough device at all, just the
* transport layer device.
*/
if (((arglist & CAM_ARG_OPT_MASK) != CAM_ARG_RESCAN)
&& ((arglist & CAM_ARG_OPT_MASK) != CAM_ARG_DEVTREE)
&& ((arglist & CAM_ARG_OPT_MASK) != CAM_ARG_USAGE)
&& ((arglist & CAM_ARG_OPT_MASK) != CAM_ARG_DEBUG)) {
if ((cam_dev = cam_open_spec_device(device,unit,O_RDWR,
NULL))== NULL)
errx(1,"%s", cam_errbuf);
}
/*
* Reset optind to 2, and reset getopt, so these routines cam parse
* the arguments again.
*/
optind = 2;
optreset = 1;
switch(arglist & CAM_ARG_OPT_MASK) {
case CAM_ARG_DEVLIST:
error = getdevlist(cam_dev);
break;
case CAM_ARG_DEVTREE:
error = getdevtree();
break;
case CAM_ARG_TUR:
error = testunitready(cam_dev, retry_count, timeout);
break;
case CAM_ARG_INQUIRY:
error = scsidoinquiry(cam_dev, argc, argv, combinedopt,
retry_count, timeout);
break;
case CAM_ARG_STARTSTOP:
error = scsistart(cam_dev, arglist & CAM_ARG_START_UNIT,
arglist & CAM_ARG_EJECT, retry_count,
timeout);
break;
case CAM_ARG_RESCAN:
error = dorescan(argc, argv);
break;
case CAM_ARG_READ_DEFECTS:
error = readdefects(cam_dev, argc, argv, combinedopt,
retry_count, timeout);
break;
case CAM_ARG_MODE_PAGE:
modepage(cam_dev, argc, argv, combinedopt,
retry_count, timeout);
break;
case CAM_ARG_SCSI_CMD:
error = scsicmd(cam_dev, argc, argv, combinedopt,
retry_count, timeout);
break;
case CAM_ARG_DEBUG:
error = camdebug(argc, argv, combinedopt);
break;
default:
usage();
error = 1;
break;
}
if (cam_dev != NULL)
cam_close_device(cam_dev);
exit(error);
}
Reference in New Issue View Git Blame Copy Permalink