freebsd-dev/sys/dev/mse/mse_isa.c
2005-01-11 06:24:40 +00:00

446 lines
12 KiB
C

/*-
* Copyright (c) 2004 M. Warner Losh
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*-
* Copyright 1992 by the University of Guelph
*
* Permission to use, copy and modify this
* software and its documentation for any purpose and without
* fee is hereby granted, provided that the above copyright
* notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting
* documentation.
* University of Guelph makes no representations about the suitability of
* this software for any purpose. It is provided "as is"
* without express or implied warranty.
*/
/*
* Driver for the Logitech and ATI Inport Bus mice for use with 386bsd and
* the X386 port, courtesy of
* Rick Macklem, rick@snowhite.cis.uoguelph.ca
* Caveats: The driver currently uses spltty(), but doesn't use any
* generic tty code. It could use splmse() (that only masks off the
* bus mouse interrupt, but that would require hacking in i386/isa/icu.s.
* (This may be worth the effort, since the Logitech generates 30/60
* interrupts/sec continuously while it is open.)
* NB: The ATI has NOT been tested yet!
*/
/*
* Modification history:
* Sep 6, 1994 -- Lars Fredriksen(fredriks@mcs.com)
* improved probe based on input from Logitech.
*
* Oct 19, 1992 -- E. Stark (stark@cs.sunysb.edu)
* fixes to make it work with Microsoft InPort busmouse
*
* Jan, 1993 -- E. Stark (stark@cs.sunysb.edu)
* added patches for new "select" interface
*
* May 4, 1993 -- E. Stark (stark@cs.sunysb.edu)
* changed position of some spl()'s in mseread
*
* October 8, 1993 -- E. Stark (stark@cs.sunysb.edu)
* limit maximum negative x/y value to -127 to work around XFree problem
* that causes spurious button pushes.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/poll.h>
#include <sys/selinfo.h>
#include <sys/uio.h>
#include <sys/mouse.h>
#include <machine/bus.h>
#include <machine/clock.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <isa/isavar.h>
#include <dev/mse/msevar.h>
static int mse_probe(device_t dev);
static int mse_attach(device_t dev);
static int mse_detach(device_t dev);
static device_method_t mse_methods[] = {
DEVMETHOD(device_probe, mse_probe),
DEVMETHOD(device_attach, mse_attach),
DEVMETHOD(device_detach, mse_detach),
{ 0, 0 }
};
static driver_t mse_driver = {
"mse",
mse_methods,
sizeof(mse_softc_t),
};
DRIVER_MODULE(mse, isa, mse_driver, mse_devclass, 0, 0);
static struct isa_pnp_id mse_ids[] = {
{ 0x000fd041, "Bus mouse" }, /* PNP0F00 */
{ 0x020fd041, "InPort mouse" }, /* PNP0F02 */
{ 0x0d0fd041, "InPort mouse compatible" }, /* PNP0F0D */
{ 0x110fd041, "Bus mouse compatible" }, /* PNP0F11 */
{ 0x150fd041, "Logitech bus mouse" }, /* PNP0F15 */
{ 0x180fd041, "Logitech bus mouse compatible" },/* PNP0F18 */
{ 0 }
};
/*
* Logitech bus mouse definitions
*/
#define MSE_SETUP 0x91 /* What does this mean? */
/* The definition for the control port */
/* is as follows: */
/* D7 = Mode set flag (1 = active) */
/* D6,D5 = Mode selection (port A) */
/* 00 = Mode 0 = Basic I/O */
/* 01 = Mode 1 = Strobed I/O */
/* 10 = Mode 2 = Bi-dir bus */
/* D4 = Port A direction (1 = input)*/
/* D3 = Port C (upper 4 bits) */
/* direction. (1 = input) */
/* D2 = Mode selection (port B & C) */
/* 0 = Mode 0 = Basic I/O */
/* 1 = Mode 1 = Strobed I/O */
/* D1 = Port B direction (1 = input)*/
/* D0 = Port C (lower 4 bits) */
/* direction. (1 = input) */
/* So 91 means Basic I/O on all 3 ports,*/
/* Port A is an input port, B is an */
/* output port, C is split with upper */
/* 4 bits being an output port and lower*/
/* 4 bits an input port, and enable the */
/* sucker. */
/* Courtesy Intel 8255 databook. Lars */
#define MSE_HOLD 0x80
#define MSE_RXLOW 0x00
#define MSE_RXHIGH 0x20
#define MSE_RYLOW 0x40
#define MSE_RYHIGH 0x60
#define MSE_DISINTR 0x10
#define MSE_INTREN 0x00
static int mse_probelogi(device_t dev, mse_softc_t *sc);
static void mse_disablelogi(bus_space_tag_t t,
bus_space_handle_t h);
static void mse_getlogi(bus_space_tag_t t, bus_space_handle_t h,
int *dx, int *dy, int *but);
static void mse_enablelogi(bus_space_tag_t t,
bus_space_handle_t h);
/*
* ATI Inport mouse definitions
*/
#define MSE_INPORT_RESET 0x80
#define MSE_INPORT_STATUS 0x00
#define MSE_INPORT_DX 0x01
#define MSE_INPORT_DY 0x02
#define MSE_INPORT_MODE 0x07
#define MSE_INPORT_HOLD 0x20
#define MSE_INPORT_INTREN 0x09
static int mse_probeati(device_t dev, mse_softc_t *sc);
static void mse_enableati(bus_space_tag_t t, bus_space_handle_t h);
static void mse_disableati(bus_space_tag_t t, bus_space_handle_t h);
static void mse_getati(bus_space_tag_t t, bus_space_handle_t h,
int *dx, int *dy, int *but);
static struct mse_types mse_types[] = {
{ MSE_ATIINPORT,
mse_probeati, mse_enableati, mse_disableati, mse_getati,
{ 2, MOUSE_IF_INPORT, MOUSE_MOUSE, MOUSE_MODEL_GENERIC, 0, },
{ MOUSE_PROTO_INPORT, -1, -1, 0, 0, MOUSE_MSC_PACKETSIZE,
{ MOUSE_MSC_SYNCMASK, MOUSE_MSC_SYNC, }, }, },
{ MSE_LOGITECH,
mse_probelogi, mse_enablelogi, mse_disablelogi, mse_getlogi,
{ 2, MOUSE_IF_BUS, MOUSE_MOUSE, MOUSE_MODEL_GENERIC, 0, },
{ MOUSE_PROTO_BUS, -1, -1, 0, 0, MOUSE_MSC_PACKETSIZE,
{ MOUSE_MSC_SYNCMASK, MOUSE_MSC_SYNC, }, }, },
{ 0, },
};
static int
mse_probe(dev)
device_t dev;
{
mse_softc_t *sc;
int error;
int rid;
int i;
/* check PnP IDs */
error = ISA_PNP_PROBE(device_get_parent(dev), dev, mse_ids);
if (error == ENXIO)
return error;
sc = device_get_softc(dev);
rid = 0;
sc->sc_port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0,
MSE_IOSIZE, RF_ACTIVE);
if (sc->sc_port == NULL)
return ENXIO;
sc->sc_iot = rman_get_bustag(sc->sc_port);
sc->sc_ioh = rman_get_bushandle(sc->sc_port);
/*
* Check for each mouse type in the table.
*/
i = 0;
while (mse_types[i].m_type) {
if ((*mse_types[i].m_probe)(dev, sc)) {
sc->sc_mousetype = mse_types[i].m_type;
sc->sc_enablemouse = mse_types[i].m_enable;
sc->sc_disablemouse = mse_types[i].m_disable;
sc->sc_getmouse = mse_types[i].m_get;
sc->hw = mse_types[i].m_hw;
sc->mode = mse_types[i].m_mode;
bus_release_resource(dev, SYS_RES_IOPORT, rid,
sc->sc_port);
device_set_desc(dev, "Bus/InPort Mouse");
return 0;
}
i++;
}
bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
return ENXIO;
}
static int
mse_attach(dev)
device_t dev;
{
mse_softc_t *sc;
int rid;
sc = device_get_softc(dev);
rid = 0;
sc->sc_port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0,
MSE_IOSIZE, RF_ACTIVE);
if (sc->sc_port == NULL)
return ENXIO;
sc->sc_iot = rman_get_bustag(sc->sc_port);
sc->sc_ioh = rman_get_bushandle(sc->sc_port);
return (mse_common_attach(dev));
}
static int
mse_detach(dev)
device_t dev;
{
mse_softc_t *sc;
int rid;
sc = device_get_softc(dev);
if (sc->sc_flags & MSESC_OPEN)
return EBUSY;
rid = 0;
BUS_TEARDOWN_INTR(device_get_parent(dev), dev, sc->sc_intr, sc->sc_ih);
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->sc_intr);
bus_release_resource(dev, SYS_RES_IOPORT, rid, sc->sc_port);
destroy_dev(sc->sc_dev);
destroy_dev(sc->sc_ndev);
return 0;
}
/*
* Routines for the Logitech mouse.
*/
/*
* Test for a Logitech bus mouse and return 1 if it is.
* (until I know how to use the signature port properly, just disable
* interrupts and return 1)
*/
static int
mse_probelogi(dev, sc)
device_t dev;
mse_softc_t *sc;
{
int sig;
bus_space_write_1(sc->sc_iot, sc->sc_ioh, MSE_PORTD, MSE_SETUP);
/* set the signature port */
bus_space_write_1(sc->sc_iot, sc->sc_ioh, MSE_PORTB, MSE_LOGI_SIG);
DELAY(30000); /* 30 ms delay */
sig = bus_space_read_1(sc->sc_iot, sc->sc_ioh, MSE_PORTB) & 0xFF;
if (sig == MSE_LOGI_SIG) {
bus_space_write_1(sc->sc_iot, sc->sc_ioh, MSE_PORTC,
MSE_DISINTR);
return(1);
} else {
if (bootverbose)
device_printf(dev, "wrong signature %x\n", sig);
return(0);
}
}
/*
* Initialize Logitech mouse and enable interrupts.
*/
static void
mse_enablelogi(tag, handle)
bus_space_tag_t tag;
bus_space_handle_t handle;
{
int dx, dy, but;
bus_space_write_1(tag, handle, MSE_PORTD, MSE_SETUP);
mse_getlogi(tag, handle, &dx, &dy, &but);
}
/*
* Disable interrupts for Logitech mouse.
*/
static void
mse_disablelogi(tag, handle)
bus_space_tag_t tag;
bus_space_handle_t handle;
{
bus_space_write_1(tag, handle, MSE_PORTC, MSE_DISINTR);
}
/*
* Get the current dx, dy and button up/down state.
*/
static void
mse_getlogi(tag, handle, dx, dy, but)
bus_space_tag_t tag;
bus_space_handle_t handle;
int *dx;
int *dy;
int *but;
{
register char x, y;
bus_space_write_1(tag, handle, MSE_PORTC, MSE_HOLD | MSE_RXLOW);
x = bus_space_read_1(tag, handle, MSE_PORTA);
*but = (x >> 5) & MOUSE_MSC_BUTTONS;
x &= 0xf;
bus_space_write_1(tag, handle, MSE_PORTC, MSE_HOLD | MSE_RXHIGH);
x |= (bus_space_read_1(tag, handle, MSE_PORTA) << 4);
bus_space_write_1(tag, handle, MSE_PORTC, MSE_HOLD | MSE_RYLOW);
y = (bus_space_read_1(tag, handle, MSE_PORTA) & 0xf);
bus_space_write_1(tag, handle, MSE_PORTC, MSE_HOLD | MSE_RYHIGH);
y |= (bus_space_read_1(tag, handle, MSE_PORTA) << 4);
*dx = x;
*dy = y;
bus_space_write_1(tag, handle, MSE_PORTC, MSE_INTREN);
}
/*
* Routines for the ATI Inport bus mouse.
*/
/*
* Test for an ATI Inport bus mouse and return 1 if it is.
* (do not enable interrupts)
*/
static int
mse_probeati(dev, sc)
device_t dev;
mse_softc_t *sc;
{
int i;
for (i = 0; i < 2; i++)
if (bus_space_read_1(sc->sc_iot, sc->sc_ioh, MSE_PORTC) == 0xde)
return (1);
return (0);
}
/*
* Initialize ATI Inport mouse and enable interrupts.
*/
static void
mse_enableati(tag, handle)
bus_space_tag_t tag;
bus_space_handle_t handle;
{
bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_RESET);
bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_MODE);
bus_space_write_1(tag, handle, MSE_PORTB, MSE_INPORT_INTREN);
}
/*
* Disable interrupts for ATI Inport mouse.
*/
static void
mse_disableati(tag, handle)
bus_space_tag_t tag;
bus_space_handle_t handle;
{
bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_MODE);
bus_space_write_1(tag, handle, MSE_PORTB, 0);
}
/*
* Get current dx, dy and up/down button state.
*/
static void
mse_getati(tag, handle, dx, dy, but)
bus_space_tag_t tag;
bus_space_handle_t handle;
int *dx;
int *dy;
int *but;
{
register char byte;
bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_MODE);
bus_space_write_1(tag, handle, MSE_PORTB, MSE_INPORT_HOLD);
bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_STATUS);
*but = ~bus_space_read_1(tag, handle, MSE_PORTB) & MOUSE_MSC_BUTTONS;
bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_DX);
byte = bus_space_read_1(tag, handle, MSE_PORTB);
*dx = byte;
bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_DY);
byte = bus_space_read_1(tag, handle, MSE_PORTB);
*dy = byte;
bus_space_write_1(tag, handle, MSE_PORTA, MSE_INPORT_MODE);
bus_space_write_1(tag, handle, MSE_PORTB, MSE_INPORT_INTREN);
}