d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9666cda976
freebsd-dev/sys/dev/sec/sec.h
John Baldwin c034143269 Refactor driver and consumer interfaces for OCF (in-kernel crypto). 
- The linked list of cryptoini structures used in session
  initialization is replaced with a new flat structure: struct
  crypto_session_params.  This session includes a new mode to define
  how the other fields should be interpreted.  Available modes
  include:

  - COMPRESS (for compression/decompression)
  - CIPHER (for simply encryption/decryption)
  - DIGEST (computing and verifying digests)
  - AEAD (combined auth and encryption such as AES-GCM and AES-CCM)
  - ETA (combined auth and encryption using encrypt-then-authenticate)

  Additional modes could be added in the future (e.g. if we wanted to
  support TLS MtE for AES-CBC in the kernel we could add a new mode
  for that.  TLS modes might also affect how AAD is interpreted, etc.)

  The flat structure also includes the key lengths and algorithms as
  before.  However, code doesn't have to walk the linked list and
  switch on the algorithm to determine which key is the auth key vs
  encryption key.  The 'csp_auth_*' fields are always used for auth
  keys and settings and 'csp_cipher_*' for cipher.  (Compression
  algorithms are stored in csp_cipher_alg.)

- Drivers no longer register a list of supported algorithms.  This
  doesn't quite work when you factor in modes (e.g. a driver might
  support both AES-CBC and SHA2-256-HMAC separately but not combined
  for ETA).  Instead, a new 'crypto_probesession' method has been
  added to the kobj interface for symmteric crypto drivers.  This
  method returns a negative value on success (similar to how
  device_probe works) and the crypto framework uses this value to pick
  the "best" driver.  There are three constants for hardware
  (e.g. ccr), accelerated software (e.g. aesni), and plain software
  (cryptosoft) that give preference in that order.  One effect of this
  is that if you request only hardware when creating a new session,
  you will no longer get a session using accelerated software.
  Another effect is that the default setting to disallow software
  crypto via /dev/crypto now disables accelerated software.

  Once a driver is chosen, 'crypto_newsession' is invoked as before.

- Crypto operations are now solely described by the flat 'cryptop'
  structure.  The linked list of descriptors has been removed.

  A separate enum has been added to describe the type of data buffer
  in use instead of using CRYPTO_F_* flags to make it easier to add
  more types in the future if needed (e.g. wired userspace buffers for
  zero-copy).  It will also make it easier to re-introduce separate
  input and output buffers (in-kernel TLS would benefit from this).

  Try to make the flags related to IV handling less insane:

  - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv'
    member of the operation structure.  If this flag is not set, the
    IV is stored in the data buffer at the 'crp_iv_start' offset.

  - CRYPTO_F_IV_GENERATE means that a random IV should be generated
    and stored into the data buffer.  This cannot be used with
    CRYPTO_F_IV_SEPARATE.

  If a consumer wants to deal with explicit vs implicit IVs, etc. it
  can always generate the IV however it needs and store partial IVs in
  the buffer and the full IV/nonce in crp_iv and set
  CRYPTO_F_IV_SEPARATE.

  The layout of the buffer is now described via fields in cryptop.
  crp_aad_start and crp_aad_length define the boundaries of any AAD.
  Previously with GCM and CCM you defined an auth crd with this range,
  but for ETA your auth crd had to span both the AAD and plaintext
  (and they had to be adjacent).

  crp_payload_start and crp_payload_length define the boundaries of
  the plaintext/ciphertext.  Modes that only do a single operation
  (COMPRESS, CIPHER, DIGEST) should only use this region and leave the
  AAD region empty.

  If a digest is present (or should be generated), it's starting
  location is marked by crp_digest_start.

  Instead of using the CRD_F_ENCRYPT flag to determine the direction
  of the operation, cryptop now includes an 'op' field defining the
  operation to perform.  For digests I've added a new VERIFY digest
  mode which assumes a digest is present in the input and fails the
  request with EBADMSG if it doesn't match the internally-computed
  digest.  GCM and CCM already assumed this, and the new AEAD mode
  requires this for decryption.  The new ETA mode now also requires
  this for decryption, so IPsec and GELI no longer do their own
  authentication verification.  Simple DIGEST operations can also do
  this, though there are no in-tree consumers.

  To eventually support some refcounting to close races, the session
  cookie is now passed to crypto_getop() and clients should no longer
  set crp_sesssion directly.

- Assymteric crypto operation structures should be allocated via
  crypto_getkreq() and freed via crypto_freekreq().  This permits the
  crypto layer to track open asym requests and close races with a
  driver trying to unregister while asym requests are in flight.

- crypto_copyback, crypto_copydata, crypto_apply, and
  crypto_contiguous_subsegment now accept the 'crp' object as the
  first parameter instead of individual members.  This makes it easier
  to deal with different buffer types in the future as well as
  separate input and output buffers.  It's also simpler for driver
  writers to use.

- bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer.
  This understands the various types of buffers so that drivers that
  use DMA do not have to be aware of different buffer types.

- Helper routines now exist to build an auth context for HMAC IPAD
  and OPAD.  This reduces some duplicated work among drivers.

- Key buffers are now treated as const throughout the framework and in
  device drivers.  However, session key buffers provided when a session
  is created are expected to remain alive for the duration of the
  session.

- GCM and CCM sessions now only specify a cipher algorithm and a cipher
  key.  The redundant auth information is not needed or used.

- For cryptosoft, split up the code a bit such that the 'process'
  callback now invokes a function pointer in the session.  This
  function pointer is set based on the mode (in effect) though it
  simplifies a few edge cases that would otherwise be in the switch in
  'process'.

  It does split up GCM vs CCM which I think is more readable even if there
  is some duplication.

- I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC
  as an auth algorithm and updated cryptocheck to work with it.

- Combined cipher and auth sessions via /dev/crypto now always use ETA
  mode.  The COP_F_CIPHER_FIRST flag is now a no-op that is ignored.
  This was actually documented as being true in crypto(4) before, but
  the code had not implemented this before I added the CIPHER_FIRST
  flag.

- I have not yet updated /dev/crypto to be aware of explicit modes for
  sessions.  I will probably do that at some point in the future as well
  as teach it about IV/nonce and tag lengths for AEAD so we can support
  all of the NIST KAT tests for GCM and CCM.

- I've split up the exising crypto.9 manpage into several pages
  of which many are written from scratch.

- I have converted all drivers and consumers in the tree and verified
  that they compile, but I have not tested all of them.  I have tested
  the following drivers:

  - cryptosoft
  - aesni (AES only)
  - blake2
  - ccr

  and the following consumers:

  - cryptodev
  - IPsec
  - ktls_ocf
  - GELI (lightly)

  I have not tested the following:

  - ccp
  - aesni with sha
  - hifn
  - kgssapi_krb5
  - ubsec
  - padlock
  - safe
  - armv8_crypto (aarch64)
  - glxsb (i386)
  - sec (ppc)
  - cesa (armv7)
  - cryptocteon (mips64)
  - nlmsec (mips64)

Discussed with:	cem
Relnotes:	yes
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00

418 lines
12 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (C) 2008-2009 Semihalf, Piotr Ziecik
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _SEC_H
#define _SEC_H
/*
* Each SEC channel can hold up to 24 descriptors. All 4 channels can be
* simultaneously active holding 96 descriptors. Each descriptor can use 0 or
* more link table entries depending of size and granulation of input/output
* data. One link table entry is needed for each 65535 bytes of data.
*/
/* Driver settings */
#define SEC_TIMEOUT 100000
#define SEC_MAX_SESSIONS 256
#define SEC_DESCRIPTORS 256 /* Must be power of 2 */
#define SEC_LT_ENTRIES 1024 /* Must be power of 2 */
#define SEC_MAX_IV_LEN 16
#define SEC_MAX_KEY_LEN 64
/* SEC information */
#define SEC_20_ID 0x0000000000000040ULL
#define SEC_30_ID 0x0030030000000000ULL
#define SEC_31_ID 0x0030030100000000ULL
#define SEC_CHANNELS 4
#define SEC_POINTERS 7
#define SEC_MAX_DMA_BLOCK_SIZE 0xFFFF
#define SEC_MAX_FIFO_LEVEL 24
#define SEC_DMA_ALIGNMENT 8
#define __packed__ __attribute__ ((__packed__))
struct sec_softc;
struct sec_session;
/* SEC descriptor definition */
struct sec_hw_desc_ptr {
u_int shdp_length : 16;
u_int shdp_j : 1;
u_int shdp_extent : 7;
u_int __padding0 : 4;
uint64_t shdp_ptr : 36;
} __packed__;
struct sec_hw_desc {
union __packed__ {
struct __packed__ {
u_int eu_sel0 : 4;
u_int mode0 : 8;
u_int eu_sel1 : 4;
u_int mode1 : 8;
u_int desc_type : 5;
u_int __padding0 : 1;
u_int dir : 1;
u_int dn : 1;
u_int __padding1 : 32;
} request;
struct __packed__ {
u_int done : 8;
u_int __padding0 : 27;
u_int iccr0 : 2;
u_int __padding1 : 6;
u_int iccr1 : 2;
u_int __padding2 : 19;
} feedback;
} shd_control;
struct sec_hw_desc_ptr shd_pointer[SEC_POINTERS];
/* Data below is mapped to descriptor pointers */
uint8_t shd_iv[SEC_MAX_IV_LEN];
uint8_t shd_key[SEC_MAX_KEY_LEN];
uint8_t shd_mkey[SEC_MAX_KEY_LEN];
uint8_t shd_digest[HASH_MAX_LEN];
} __packed__;
#define shd_eu_sel0 shd_control.request.eu_sel0
#define shd_mode0 shd_control.request.mode0
#define shd_eu_sel1 shd_control.request.eu_sel1
#define shd_mode1 shd_control.request.mode1
#define shd_desc_type shd_control.request.desc_type
#define shd_dir shd_control.request.dir
#define shd_dn shd_control.request.dn
#define shd_done shd_control.feedback.done
#define shd_iccr0 shd_control.feedback.iccr0
#define shd_iccr1 shd_control.feedback.iccr1
/* SEC link table entries definition */
struct sec_hw_lt {
u_int shl_length : 16;
u_int __padding0 : 6;
u_int shl_r : 1;
u_int shl_n : 1;
u_int __padding1 : 4;
uint64_t shl_ptr : 36;
} __packed__;
struct sec_dma_mem {
void *dma_vaddr;
bus_addr_t dma_paddr;
bus_dma_tag_t dma_tag;
bus_dmamap_t dma_map;
u_int dma_is_map;
};
struct sec_desc {
struct sec_hw_desc *sd_desc;
bus_addr_t sd_desc_paddr;
struct sec_dma_mem sd_ptr_dmem[SEC_POINTERS];
struct cryptop *sd_crp;
u_int sd_lt_used;
u_int sd_error;
};
struct sec_lt {
struct sec_hw_lt *sl_lt;
bus_addr_t sl_lt_paddr;
};
struct sec_eu_methods {
bool (*sem_newsession)(const struct crypto_session_params *csp);
int (*sem_make_desc)(struct sec_softc *sc,
const struct crypto_session_params *csp, struct sec_desc *desc,
struct cryptop *crp);
};
struct sec_session {
struct sec_eu_methods *ss_eu;
uint8_t ss_key[SEC_MAX_KEY_LEN];
uint8_t ss_mkey[SEC_MAX_KEY_LEN];
int ss_mlen;
};
struct sec_desc_map_info {
struct sec_softc *sdmi_sc;
bus_size_t sdmi_size;
bus_size_t sdmi_offset;
struct sec_lt *sdmi_lt_first;
struct sec_lt *sdmi_lt_last;
u_int sdmi_lt_used;
};
struct sec_softc {
device_t sc_dev;
int32_t sc_cid;
int sc_blocked;
int sc_shutdown;
u_int sc_version;
uint64_t sc_int_error_mask;
uint64_t sc_channel_idle_mask;
struct mtx sc_controller_lock;
struct mtx sc_descriptors_lock;
struct sec_desc sc_desc[SEC_DESCRIPTORS];
u_int sc_free_desc_get_cnt;
u_int sc_free_desc_put_cnt;
u_int sc_ready_desc_get_cnt;
u_int sc_ready_desc_put_cnt;
u_int sc_queued_desc_get_cnt;
u_int sc_queued_desc_put_cnt;
struct sec_lt sc_lt[SEC_LT_ENTRIES + 1];
u_int sc_lt_alloc_cnt;
u_int sc_lt_free_cnt;
struct sec_dma_mem sc_desc_dmem; /* descriptors DMA memory */
struct sec_dma_mem sc_lt_dmem; /* link tables DMA memory */
struct resource *sc_rres; /* register resource */
int sc_rrid; /* register rid */
struct {
bus_space_tag_t bst;
bus_space_handle_t bsh;
} sc_bas;
struct resource *sc_pri_ires; /* primary irq resource */
void *sc_pri_ihand; /* primary irq handler */
int sc_pri_irid; /* primary irq resource id */
struct resource *sc_sec_ires; /* secondary irq resource */
void *sc_sec_ihand; /* secondary irq handler */
int sc_sec_irid; /* secondary irq resource id */
};
/* Locking macros */
#define SEC_LOCK(sc, what) \
mtx_lock(&(sc)->sc_ ## what ## _lock)
#define SEC_UNLOCK(sc, what) \
mtx_unlock(&(sc)->sc_ ## what ## _lock)
#define SEC_LOCK_ASSERT(sc, what) \
mtx_assert(&(sc)->sc_ ## what ## _lock, MA_OWNED)
/* Read/Write definitions */
#define SEC_READ(sc, reg) \
bus_space_read_8((sc)->sc_bas.bst, (sc)->sc_bas.bsh, (reg))
#define SEC_WRITE(sc, reg, val) \
bus_space_write_8((sc)->sc_bas.bst, (sc)->sc_bas.bsh, (reg), (val))
/* Base allocation macros (warning: wrap must be 2^n) */
#define SEC_CNT_INIT(sc, cnt, wrap) \
(((sc)->cnt) = ((wrap) - 1))
#define SEC_ADD(sc, cnt, wrap, val) \
((sc)->cnt = (((sc)->cnt) + (val)) & ((wrap) - 1))
#define SEC_INC(sc, cnt, wrap) \
SEC_ADD(sc, cnt, wrap, 1)
#define SEC_DEC(sc, cnt, wrap) \
SEC_ADD(sc, cnt, wrap, -1)
#define SEC_GET_GENERIC(sc, tab, cnt, wrap) \
((sc)->tab[SEC_INC(sc, cnt, wrap)])
#define SEC_PUT_GENERIC(sc, tab, cnt, wrap, val) \
((sc)->tab[SEC_INC(sc, cnt, wrap)] = val)
/* Interface for descriptors */
#define SEC_GET_FREE_DESC(sc) \
&SEC_GET_GENERIC(sc, sc_desc, sc_free_desc_get_cnt, SEC_DESCRIPTORS)
#define SEC_PUT_BACK_FREE_DESC(sc) \
SEC_DEC(sc, sc_free_desc_get_cnt, SEC_DESCRIPTORS)
#define SEC_DESC_FREE2READY(sc) \
SEC_INC(sc, sc_ready_desc_put_cnt, SEC_DESCRIPTORS)
#define SEC_GET_READY_DESC(sc) \
&SEC_GET_GENERIC(sc, sc_desc, sc_ready_desc_get_cnt, SEC_DESCRIPTORS)
#define SEC_PUT_BACK_READY_DESC(sc) \
SEC_DEC(sc, sc_ready_desc_get_cnt, SEC_DESCRIPTORS)
#define SEC_DESC_READY2QUEUED(sc) \
SEC_INC(sc, sc_queued_desc_put_cnt, SEC_DESCRIPTORS)
#define SEC_GET_QUEUED_DESC(sc) \
&SEC_GET_GENERIC(sc, sc_desc, sc_queued_desc_get_cnt, SEC_DESCRIPTORS)
#define SEC_PUT_BACK_QUEUED_DESC(sc) \
SEC_DEC(sc, sc_queued_desc_get_cnt, SEC_DESCRIPTORS)
#define SEC_DESC_QUEUED2FREE(sc) \
SEC_INC(sc, sc_free_desc_put_cnt, SEC_DESCRIPTORS)
#define SEC_FREE_DESC_CNT(sc) \
(((sc)->sc_free_desc_put_cnt - (sc)->sc_free_desc_get_cnt - 1) \
& (SEC_DESCRIPTORS - 1))
#define SEC_READY_DESC_CNT(sc) \
(((sc)->sc_ready_desc_put_cnt - (sc)->sc_ready_desc_get_cnt) & \
(SEC_DESCRIPTORS - 1))
#define SEC_QUEUED_DESC_CNT(sc) \
(((sc)->sc_queued_desc_put_cnt - (sc)->sc_queued_desc_get_cnt) \
& (SEC_DESCRIPTORS - 1))
#define SEC_DESC_SYNC(sc, mode) do { \
sec_sync_dma_mem(&((sc)->sc_desc_dmem), (mode)); \
sec_sync_dma_mem(&((sc)->sc_lt_dmem), (mode)); \
} while (0)
#define SEC_DESC_SYNC_POINTERS(desc, mode) do { \
u_int i; \
for (i = 0; i < SEC_POINTERS; i++) \
sec_sync_dma_mem(&((desc)->sd_ptr_dmem[i]), (mode)); \
} while (0)
#define SEC_DESC_FREE_POINTERS(desc) do { \
u_int i; \
for (i = 0; i < SEC_POINTERS; i++) \
sec_free_dma_mem(&(desc)->sd_ptr_dmem[i]); \
} while (0);
#define SEC_DESC_PUT_BACK_LT(sc, desc) \
SEC_PUT_BACK_LT(sc, (desc)->sd_lt_used)
#define SEC_DESC_FREE_LT(sc, desc) \
SEC_FREE_LT(sc, (desc)->sd_lt_used)
/* Interface for link tables */
#define SEC_ALLOC_LT_ENTRY(sc) \
&SEC_GET_GENERIC(sc, sc_lt, sc_lt_alloc_cnt, SEC_LT_ENTRIES)
#define SEC_PUT_BACK_LT(sc, num) \
SEC_ADD(sc, sc_lt_alloc_cnt, SEC_LT_ENTRIES, -(num))
#define SEC_FREE_LT(sc, num) \
SEC_ADD(sc, sc_lt_free_cnt, SEC_LT_ENTRIES, num)
#define SEC_FREE_LT_CNT(sc) \
(((sc)->sc_lt_free_cnt - (sc)->sc_lt_alloc_cnt - 1) \
& (SEC_LT_ENTRIES - 1))
/* Size of SEC registers area */
#define SEC_IO_SIZE 0x10000
/* SEC Controller registers */
#define SEC_IER 0x1008
#define SEC_INT_CH_DN(n) (1ULL << (((n) * 2) + 32))
#define SEC_INT_CH_ERR(n) (1ULL << (((n) * 2) + 33))
#define SEC_INT_ITO (1ULL << 55)
#define SEC_ISR 0x1010
#define SEC_ICR 0x1018
#define SEC_ID 0x1020
#define SEC_EUASR 0x1028
#define SEC_EUASR_RNGU(r) (((r) >> 0) & 0xF)
#define SEC_EUASR_PKEU(r) (((r) >> 8) & 0xF)
#define SEC_EUASR_KEU(r) (((r) >> 16) & 0xF)
#define SEC_EUASR_CRCU(r) (((r) >> 20) & 0xF)
#define SEC_EUASR_DEU(r) (((r) >> 32) & 0xF)
#define SEC_EUASR_AESU(r) (((r) >> 40) & 0xF)
#define SEC_EUASR_MDEU(r) (((r) >> 48) & 0xF)
#define SEC_EUASR_AFEU(r) (((r) >> 56) & 0xF)
#define SEC_MCR 0x1030
#define SEC_MCR_SWR (1ULL << 32)
/* SEC Channel registers */
#define SEC_CHAN_CCR(n) (((n) * 0x100) + 0x1108)
#define SEC_CHAN_CCR_CDIE (1ULL << 1)
#define SEC_CHAN_CCR_NT (1ULL << 2)
#define SEC_CHAN_CCR_AWSE (1ULL << 3)
#define SEC_CHAN_CCR_CDWE (1ULL << 4)
#define SEC_CHAN_CCR_BS (1ULL << 8)
#define SEC_CHAN_CCR_WGN (1ULL << 13)
#define SEC_CHAN_CCR_R (1ULL << 32)
#define SEC_CHAN_CCR_CON (1ULL << 33)
#define SEC_CHAN_CSR(n) (((n) * 0x100) + 0x1110)
#define SEC_CHAN_CSR2_FFLVL_M 0x1FULL
#define SEC_CHAN_CSR2_FFLVL_S 56
#define SEC_CHAN_CSR2_GSTATE_M 0x0FULL
#define SEC_CHAN_CSR2_GSTATE_S 48
#define SEC_CHAN_CSR2_PSTATE_M 0x0FULL
#define SEC_CHAN_CSR2_PSTATE_S 40
#define SEC_CHAN_CSR2_MSTATE_M 0x3FULL
#define SEC_CHAN_CSR2_MSTATE_S 32
#define SEC_CHAN_CSR3_FFLVL_M 0x1FULL
#define SEC_CHAN_CSR3_FFLVL_S 24
#define SEC_CHAN_CSR3_MSTATE_M 0x1FFULL
#define SEC_CHAN_CSR3_MSTATE_S 32
#define SEC_CHAN_CSR3_PSTATE_M 0x7FULL
#define SEC_CHAN_CSR3_PSTATE_S 48
#define SEC_CHAN_CSR3_GSTATE_M 0x7FULL
#define SEC_CHAN_CSR3_GSTATE_S 56
#define SEC_CHAN_CDPR(n) (((n) * 0x100) + 0x1140)
#define SEC_CHAN_FF(n) (((n) * 0x100) + 0x1148)
/* SEC Execution Units numbers */
#define SEC_EU_NONE 0x0
#define SEC_EU_AFEU 0x1
#define SEC_EU_DEU 0x2
#define SEC_EU_MDEU_A 0x3
#define SEC_EU_MDEU_B 0xB
#define SEC_EU_RNGU 0x4
#define SEC_EU_PKEU 0x5
#define SEC_EU_AESU 0x6
#define SEC_EU_KEU 0x7
#define SEC_EU_CRCU 0x8
/* SEC descriptor types */
#define SEC_DT_COMMON_NONSNOOP 0x02
#define SEC_DT_HMAC_SNOOP 0x04
/* SEC AESU declarations and definitions */
#define SEC_AESU_MODE_ED (1ULL << 0)
#define SEC_AESU_MODE_CBC (1ULL << 1)
/* SEC DEU declarations and definitions */
#define SEC_DEU_MODE_ED (1ULL << 0)
#define SEC_DEU_MODE_TS (1ULL << 1)
#define SEC_DEU_MODE_CBC (1ULL << 2)
/* SEC MDEU declarations and definitions */
#define SEC_HMAC_HASH_LEN 12
#define SEC_MDEU_MODE_SHA1 0x00 /* MDEU A */
#define SEC_MDEU_MODE_SHA384 0x00 /* MDEU B */
#define SEC_MDEU_MODE_SHA256 0x01
#define SEC_MDEU_MODE_MD5 0x02 /* MDEU A */
#define SEC_MDEU_MODE_SHA512 0x02 /* MDEU B */
#define SEC_MDEU_MODE_SHA224 0x03
#define SEC_MDEU_MODE_PD (1ULL << 2)
#define SEC_MDEU_MODE_HMAC (1ULL << 3)
#define SEC_MDEU_MODE_INIT (1ULL << 4)
#define SEC_MDEU_MODE_SMAC (1ULL << 5)
#define SEC_MDEU_MODE_CICV (1ULL << 6)
#define SEC_MDEU_MODE_CONT (1ULL << 7)
#endif
Reference in New Issue View Git Blame Copy Permalink