freebsd-dev/sys/pci/pcivar.h
Justin T. Gibbs 06915ea69a Revive PCIConf.
Submitted by:	"Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00

227 lines
7.9 KiB
C

/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: pcivar.h,v 1.20 1998/08/13 19:12:20 gibbs Exp $
*
*/
#ifndef _PCIVAR_H_
#define _PCIVAR_H_
#ifndef PCI_COMPAT
#define PCI_COMPAT
#endif
#include <pci/pci_ioctl.h> /* XXX KDM */
#include <sys/queue.h>
/* some PCI bus constants */
#define PCI_BUSMAX 255 /* highest supported bus number */
#define PCI_SLOTMAX 31 /* highest supported slot number */
#define PCI_FUNCMAX 7 /* highest supported function number */
#define PCI_REGMAX 255 /* highest supported config register addr. */
#define PCI_MAXMAPS_0 6 /* max. no. of memory/port maps */
#define PCI_MAXMAPS_1 2 /* max. no. of maps for PCI to PCI bridge */
#define PCI_MAXMAPS_2 1 /* max. no. of maps for CardBus bridge */
/* pci_addr_t covers this system's PCI bus address space: 32 or 64 bit */
#ifdef PCI_A64
typedef u_int64_t pci_addr_t; /* u_int64_t for system with 64bit addresses */
#else
typedef u_int32_t pci_addr_t; /* u_int64_t for system with 64bit addresses */
#endif
/* map register information */
typedef struct {
u_int32_t base;
u_int8_t type;
#define PCI_MAPMEM 0x01 /* memory map */
#define PCI_MAPMEMP 0x02 /* prefetchable memory map */
#define PCI_MAPPORT 0x04 /* port map */
u_int8_t ln2size;
u_int8_t ln2range;
/* u_int8_t dummy;*/
} pcimap;
/* config header information common to all header types */
typedef struct pcicfg {
pcimap *map; /* pointer to array of PCI maps */
void *hdrspec; /* pointer to header type specific data */
u_int16_t subvendor; /* card vendor ID */
u_int16_t subdevice; /* card device ID, assigned by card vendor */
u_int16_t vendor; /* chip vendor ID */
u_int16_t device; /* chip device ID, assigned by chip vendor */
u_int16_t cmdreg; /* disable/enable chip and PCI options */
u_int16_t statreg; /* supported PCI features and error state */
u_int8_t baseclass; /* chip PCI class */
u_int8_t subclass; /* chip PCI subclass */
u_int8_t progif; /* chip PCI programming interface */
u_int8_t revid; /* chip revision ID */
u_int8_t hdrtype; /* chip config header type */
u_int8_t cachelnsz; /* cache line size in 4byte units */
u_int8_t intpin; /* PCI interrupt pin */
u_int8_t intline; /* interrupt line (IRQ for PC arch) */
u_int8_t mingnt; /* min. useful bus grant time in 250ns units */
u_int8_t maxlat; /* max. tolerated bus grant latency in 250ns */
u_int8_t lattimer; /* latency timer in units of 30ns bus cycles */
u_int8_t mfdev; /* multi-function device (from hdrtype reg) */
u_int8_t nummaps; /* actual number of PCI maps used */
u_int8_t bus; /* config space bus address */
u_int8_t slot; /* config space slot address */
u_int8_t func; /* config space function number */
u_int8_t secondarybus; /* bus on secondary side of bridge, if any */
u_int8_t subordinatebus; /* topmost bus number behind bridge, if any */
} pcicfgregs;
/* additional type 1 device config header information (PCI to PCI bridge) */
#ifdef PCI_A64
#define PCI_PPBMEMBASE(h,l) ((((pci_addr_t)(h) << 32) + ((l)<<16)) & ~0xfffff)
#define PCI_PPBMEMLIMIT(h,l) ((((pci_addr_t)(h) << 32) + ((l)<<16)) | 0xfffff)
#else
#define PCI_PPBMEMBASE(h,l) (((l)<<16) & ~0xfffff)
#define PCI_PPBMEMLIMIT(h,l) (((l)<<16) | 0xfffff)
#endif /* PCI_A64 */
#define PCI_PPBIOBASE(h,l) ((((h)<<16) + ((l)<<8)) & ~0xfff)
#define PCI_PPBIOLIMIT(h,l) ((((h)<<16) + ((l)<<8)) | 0xfff)
typedef struct {
pci_addr_t pmembase; /* base address of prefetchable memory */
pci_addr_t pmemlimit; /* topmost address of prefetchable memory */
u_int32_t membase; /* base address of memory window */
u_int32_t memlimit; /* topmost address of memory window */
u_int32_t iobase; /* base address of port window */
u_int32_t iolimit; /* topmost address of port window */
u_int16_t secstat; /* secondary bus status register */
u_int16_t bridgectl; /* bridge control register */
u_int8_t seclat; /* CardBus latency timer */
} pcih1cfgregs;
/* additional type 2 device config header information (CardBus bridge) */
typedef struct {
u_int32_t membase0; /* base address of memory window */
u_int32_t memlimit0; /* topmost address of memory window */
u_int32_t membase1; /* base address of memory window */
u_int32_t memlimit1; /* topmost address of memory window */
u_int32_t iobase0; /* base address of port window */
u_int32_t iolimit0; /* topmost address of port window */
u_int32_t iobase1; /* base address of port window */
u_int32_t iolimit1; /* topmost address of port window */
u_int32_t pccardif; /* PC Card 16bit IF legacy more base addr. */
u_int16_t secstat; /* secondary bus status register */
u_int16_t bridgectl; /* bridge control register */
u_int8_t seclat; /* CardBus latency timer */
} pcih2cfgregs;
/* PCI bus attach definitions (there could be multiple PCI bus *trees* ... */
typedef struct pciattach {
int unit;
int pcibushigh;
struct pciattach *next;
} pciattach;
struct pci_devinfo {
STAILQ_ENTRY(pci_devinfo) pci_links;
struct pci_device *device; /* should this be ifdefed? */
pcicfgregs cfg;
struct pci_conf conf;
};
extern u_int32_t pci_numdevs;
/* externally visible functions */
int pci_probe (pciattach *attach);
void pci_drvattach(struct pci_devinfo *dinfo);
/* low level PCI config register functions provided by pcibus.c */
int pci_cfgopen (void);
int pci_cfgread (pcicfgregs *cfg, int reg, int bytes);
void pci_cfgwrite (pcicfgregs *cfg, int reg, int data, int bytes);
/* for compatibility to FreeBSD-2.2 version of PCI code */
#ifdef PCI_COMPAT
typedef pcicfgregs *pcici_t;
typedef unsigned pcidi_t;
typedef void pci_inthand_t(void *arg);
#define pci_max_burst_len (3)
/* just copied from old PCI code for now ... */
extern struct linker_set pcidevice_set;
extern int pci_mechanism;
struct pci_device {
char* pd_name;
char* (*pd_probe ) (pcici_t tag, pcidi_t type);
void (*pd_attach) (pcici_t tag, int unit);
u_long *pd_count;
int (*pd_shutdown) (int, int);
};
struct pci_lkm {
struct pci_device *dvp;
struct pci_lkm *next;
};
#ifdef __i386__
typedef u_short pci_port_t;
#else
typedef u_int pci_port_t;
#endif
u_long pci_conf_read (pcici_t tag, u_long reg);
void pci_conf_write (pcici_t tag, u_long reg, u_long data);
void pci_configure (void);
int pci_map_port (pcici_t tag, u_long reg, pci_port_t* pa);
int pci_map_mem (pcici_t tag, u_long reg, vm_offset_t* va, vm_offset_t* pa);
int pci_map_int (pcici_t tag, pci_inthand_t *func, void *arg, unsigned *maskptr);
int pci_unmap_int (pcici_t tag);
int pci_register_lkm (struct pci_device *dvp, int if_revision);
#endif /* PCI_COMPAT */
#endif /* _PCIVAR_H_ */