1e25d964d2
with individual devices for each type of sound card: opl, sb, sbxvi, sbmidi, pas, mpu, gus, gusxvi, gusmax, mss, uart EXCLUDE_* options are no longer required to be included in the config file. They are automatically determined by local.h depending on the devices included. Move #includes in local.h to os.h so files are included in the proper order to avoid warnings. soundcard.c now has additional code to reflect the device driver routines needed. Define new EXCLUDE_SB16MIDI for use in sb16_midi.c and dev_table.h. #ifndef EXCLUDE_SEQUENCER or EXCLUDE_AUDIO have been added to soundcard.c and sound_switch.c where appropriate. Probe outputs changed to reflect new device names. Readme.freebsd not needed. Update sound.doc with new config instructions. Reviewed by: wollman
432 lines
10 KiB
C
432 lines
10 KiB
C
#define _PAS2_CARD_C_
|
|
/*
|
|
* sound/pas2_card.c
|
|
*
|
|
* Detection routine for the Pro Audio Spectrum cards.
|
|
*
|
|
* Copyright by Hannu Savolainen 1993
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met: 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer. 2.
|
|
* Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* pas2_card.c,v 1.11 1994/10/01 12:42:17 ache Exp
|
|
*/
|
|
|
|
#include "sound_config.h"
|
|
|
|
#if defined(CONFIGURE_SOUNDCARD) && !defined(EXCLUDE_PAS)
|
|
|
|
#define DEFINE_TRANSLATIONS
|
|
#include "pas.h"
|
|
|
|
/*
|
|
* The Address Translation code is used to convert I/O register addresses to
|
|
* be relative to the given base -register
|
|
*/
|
|
|
|
int translat_code;
|
|
static int pas_intr_mask = 0;
|
|
static int pas_irq = 0;
|
|
|
|
static char pas_model;
|
|
static unsigned char board_rev_id;
|
|
static char *pas_model_names[] =
|
|
{"", "Pro AudioSpectrum+", "CDPC", "Pro AudioSpectrum 16", "Pro AudioSpectrum 16D"};
|
|
|
|
/*
|
|
* pas_read() and pas_write() are equivalents of INB() and OUTB()
|
|
*/
|
|
/*
|
|
* These routines perform the I/O address translation required
|
|
*/
|
|
/*
|
|
* to support other than the default base address
|
|
*/
|
|
|
|
unsigned char
|
|
pas_read (int ioaddr)
|
|
{
|
|
return INB (ioaddr ^ translat_code);
|
|
}
|
|
|
|
void
|
|
pas_write (unsigned char data, int ioaddr)
|
|
{
|
|
OUTB (data, ioaddr ^ translat_code);
|
|
}
|
|
|
|
/*
|
|
* The Revision D cards have a problem with their MVA508 interface. The
|
|
* kludge-o-rama fix is to make a 16-bit quantity with identical LSB and
|
|
* MSBs out of the output byte and to do a 16-bit out to the mixer port -
|
|
* 1.
|
|
*/
|
|
|
|
void
|
|
mix_write (unsigned char data, int ioaddr)
|
|
{
|
|
if (pas_model == PAS_16D) {
|
|
outw ((ioaddr ^ translat_code) - 1, data | (data << 8));
|
|
outb (0, 0x80);
|
|
} else
|
|
OUTB (data, ioaddr ^ translat_code);
|
|
}
|
|
|
|
void
|
|
pas2_msg (char *foo)
|
|
{
|
|
printk (" PAS2: %s.\n", foo);
|
|
}
|
|
|
|
/******************* Begin of the Interrupt Handler ********************/
|
|
|
|
void
|
|
pasintr (int unused)
|
|
{
|
|
int status;
|
|
|
|
status = pas_read (INTERRUPT_STATUS);
|
|
pas_write (status, INTERRUPT_STATUS); /*
|
|
* Clear interrupt
|
|
*/
|
|
|
|
if (status & I_S_PCM_SAMPLE_BUFFER_IRQ)
|
|
{
|
|
#ifndef EXCLUDE_AUDIO
|
|
pas_pcm_interrupt (status, 1);
|
|
#endif
|
|
status &= ~I_S_PCM_SAMPLE_BUFFER_IRQ;
|
|
}
|
|
if (status & I_S_MIDI_IRQ)
|
|
{
|
|
#ifndef EXCLUDE_MIDI
|
|
#ifdef EXCLUDE_PRO_MIDI
|
|
pas_midi_interrupt ();
|
|
#endif
|
|
#endif
|
|
status &= ~I_S_MIDI_IRQ;
|
|
}
|
|
|
|
}
|
|
|
|
int
|
|
pas_set_intr (int mask)
|
|
{
|
|
int err;
|
|
|
|
if (!mask)
|
|
return 0;
|
|
|
|
if (!pas_intr_mask)
|
|
{
|
|
if ((err = snd_set_irq_handler (pas_irq, pasintr)) < 0)
|
|
return err;
|
|
}
|
|
pas_intr_mask |= mask;
|
|
|
|
pas_write (pas_intr_mask, INTERRUPT_MASK);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
pas_remove_intr (int mask)
|
|
{
|
|
if (!mask)
|
|
return 0;
|
|
|
|
pas_intr_mask &= ~mask;
|
|
pas_write (pas_intr_mask, INTERRUPT_MASK);
|
|
|
|
if (!pas_intr_mask)
|
|
{
|
|
snd_release_irq (pas_irq);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/******************* End of the Interrupt handler **********************/
|
|
|
|
/******************* Begin of the Initialization Code ******************/
|
|
|
|
int
|
|
config_pas_hw (struct address_info *hw_config)
|
|
{
|
|
char ok = 1;
|
|
unsigned int_ptrs; /* scsi/sound interrupt pointers */
|
|
|
|
pas_irq = hw_config->irq;
|
|
|
|
pas_write (0x00, INTERRUPT_MASK);
|
|
|
|
pas_write (0x36, SAMPLE_COUNTER_CONTROL); /*
|
|
* Local timer control *
|
|
* register
|
|
*/
|
|
|
|
pas_write (0x36, SAMPLE_RATE_TIMER); /*
|
|
* Sample rate timer (16 bit)
|
|
*/
|
|
pas_write (0, SAMPLE_RATE_TIMER);
|
|
|
|
pas_write (0x74, SAMPLE_COUNTER_CONTROL); /*
|
|
* Local timer control *
|
|
* register
|
|
*/
|
|
|
|
pas_write (0x74, SAMPLE_BUFFER_COUNTER); /*
|
|
* Sample count register (16
|
|
* * bit)
|
|
*/
|
|
pas_write (0, SAMPLE_BUFFER_COUNTER);
|
|
|
|
pas_write (F_F_PCM_BUFFER_COUNTER | F_F_PCM_RATE_COUNTER | F_F_MIXER_UNMUTE | 1, FILTER_FREQUENCY);
|
|
pas_write (P_C_PCM_DMA_ENABLE | P_C_PCM_MONO | P_C_PCM_DAC_MODE | P_C_MIXER_CROSS_L_TO_L | P_C_MIXER_CROSS_R_TO_R, PCM_CONTROL);
|
|
pas_write (S_M_PCM_RESET | S_M_FM_RESET | S_M_SB_RESET | S_M_MIXER_RESET /*
|
|
* |
|
|
* S_M_OPL3_DUAL_MONO
|
|
*/ , SERIAL_MIXER);
|
|
|
|
pas_write (I_C_1_BOOT_RESET_ENABLE, IO_CONFIGURATION_1);
|
|
|
|
if (pas_irq < 0 || pas_irq > 15)
|
|
{
|
|
printk ("PAS2: Invalid IRQ %d", pas_irq);
|
|
ok = 0;
|
|
}
|
|
else
|
|
{
|
|
int_ptrs = pas_read (IO_CONFIGURATION_3);
|
|
int_ptrs |= I_C_3_PCM_IRQ_translate[pas_irq] & 0xf;
|
|
pas_write (int_ptrs, IO_CONFIGURATION_3);
|
|
if (!I_C_3_PCM_IRQ_translate[pas_irq])
|
|
{
|
|
printk ("PAS2: Invalid IRQ %d", pas_irq);
|
|
ok = 0;
|
|
}
|
|
}
|
|
|
|
if (hw_config->dma < 0 || hw_config->dma > 7)
|
|
{
|
|
printk ("PAS2: Invalid DMA selection %d", hw_config->dma);
|
|
ok = 0;
|
|
}
|
|
else
|
|
{
|
|
pas_write (I_C_2_PCM_DMA_translate[hw_config->dma], IO_CONFIGURATION_2);
|
|
if (!I_C_2_PCM_DMA_translate[hw_config->dma])
|
|
{
|
|
printk ("PAS2: Invalid DMA selection %d", hw_config->dma);
|
|
ok = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This fixes the timing problems of the PAS due to the Symphony chipset
|
|
* as per Media Vision. Only define this if your PAS doesn't work correctly.
|
|
*/
|
|
#ifdef SYMPHONY_PAS
|
|
OUTB (0x05, 0xa8);
|
|
OUTB (0x60, 0xa9);
|
|
#endif
|
|
|
|
#ifdef BROKEN_BUS_CLOCK
|
|
pas_write (S_C_1_PCS_ENABLE | S_C_1_PCS_STEREO | S_C_1_PCS_REALSOUND | S_C_1_FM_EMULATE_CLOCK, SYSTEM_CONFIGURATION_1);
|
|
#else
|
|
/*
|
|
* pas_write(S_C_1_PCS_ENABLE, SYSTEM_CONFIGURATION_1);
|
|
*/
|
|
pas_write (S_C_1_PCS_ENABLE | S_C_1_PCS_STEREO | S_C_1_PCS_REALSOUND, SYSTEM_CONFIGURATION_1);
|
|
#endif
|
|
pas_write (0x18, SYSTEM_CONFIGURATION_3); /*
|
|
* ???
|
|
*/
|
|
|
|
pas_write (F_F_MIXER_UNMUTE | 0x01, FILTER_FREQUENCY); /*
|
|
* Sets mute
|
|
* off and *
|
|
* selects
|
|
* filter
|
|
* rate * of
|
|
* 17.897 kHz
|
|
*/
|
|
|
|
if (pas_model == PAS_16 || pas_model == PAS_16D)
|
|
pas_write (8, PRESCALE_DIVIDER);
|
|
else
|
|
pas_write (0, PRESCALE_DIVIDER);
|
|
|
|
mix_write (P_M_MV508_ADDRESS | 5, PARALLEL_MIXER);
|
|
mix_write (5, PARALLEL_MIXER);
|
|
|
|
#if !defined(EXCLUDE_SB_EMULATION) || !defined(EXCLUDE_SB)
|
|
|
|
{
|
|
struct address_info *sb_config;
|
|
|
|
if ((sb_config = sound_getconf (SNDCARD_SB)))
|
|
{
|
|
unsigned char irq_dma;
|
|
|
|
/*
|
|
* Turn on Sound Blaster compatibility
|
|
*/
|
|
/*
|
|
* bit 1 = SB emulation
|
|
*/
|
|
/*
|
|
* bit 0 = MPU401 emulation (CDPC only :-( )
|
|
*/
|
|
pas_write (0x02, COMPATIBILITY_ENABLE);
|
|
|
|
/*
|
|
* "Emulation address"
|
|
*/
|
|
pas_write ((sb_config->io_base >> 4) & 0x0f, EMULATION_ADDRESS);
|
|
|
|
if (!E_C_SB_DMA_translate[sb_config->dma])
|
|
printk ("\n\nPAS16 Warning: Invalid SB DMA %d\n\n",
|
|
sb_config->dma);
|
|
|
|
if (!E_C_SB_IRQ_translate[sb_config->irq])
|
|
printk ("\n\nPAS16 Warning: Invalid SB IRQ %d\n\n",
|
|
sb_config->irq);
|
|
|
|
irq_dma = E_C_SB_DMA_translate[sb_config->dma] |
|
|
E_C_SB_IRQ_translate[sb_config->irq];
|
|
|
|
pas_write (irq_dma, EMULATION_CONFIGURATION);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if (!ok)
|
|
pas2_msg ("Driver not enabled");
|
|
|
|
return ok;
|
|
}
|
|
|
|
int
|
|
detect_pas_hw (struct address_info *hw_config)
|
|
{
|
|
unsigned char board_id, foo;
|
|
|
|
/*
|
|
* WARNING: Setting an option like W:1 or so that disables warm boot reset
|
|
* of the card will screw up this detect code something fierce. Adding code
|
|
* to handle this means possibly interfering with other cards on the bus if
|
|
* you have something on base port 0x388. SO be forewarned.
|
|
*/
|
|
|
|
OUTB (0xBC, MASTER_DECODE); /*
|
|
* Talk to first board
|
|
*/
|
|
OUTB (hw_config->io_base >> 2, MASTER_DECODE); /*
|
|
* Set base address
|
|
*/
|
|
translat_code = PAS_DEFAULT_BASE ^ hw_config->io_base;
|
|
pas_write (1, WAIT_STATE); /*
|
|
* One wait-state
|
|
*/
|
|
|
|
board_id = pas_read (INTERRUPT_MASK);
|
|
|
|
if (board_id == 0xff)
|
|
return 0;
|
|
|
|
/*
|
|
* We probably have a PAS-series board, now check for a PAS2-series board
|
|
* by trying to change the board revision bits. PAS2-series hardware won't
|
|
* let you do this - the bits are read-only.
|
|
*/
|
|
|
|
foo = board_id ^ 0xe0;
|
|
|
|
pas_write (foo, INTERRUPT_MASK);
|
|
foo = INB (INTERRUPT_MASK);
|
|
pas_write (board_id, INTERRUPT_MASK);
|
|
|
|
if (board_id != foo) /*
|
|
* Not a PAS2
|
|
*/
|
|
return 0;
|
|
|
|
pas_model = pas_read (CHIP_REV);
|
|
|
|
return pas_model;
|
|
}
|
|
|
|
long
|
|
attach_pas_card (long mem_start, struct address_info *hw_config)
|
|
{
|
|
pas_irq = hw_config->irq;
|
|
|
|
if (detect_pas_hw (hw_config))
|
|
{
|
|
|
|
board_rev_id = pas_read (BOARD_REV_ID);
|
|
if (pas_model = pas_read (CHIP_REV))
|
|
{
|
|
#ifdef __FreeBSD__
|
|
printk ("pas0: <%s rev %d>", pas_model_names[(int) pas_model], board_rev_id);
|
|
#else /* __FreeBSD__ */
|
|
printk (" <%s rev %d>", pas_model_names[(int) pas_model], pas_read (BOARD_REV_ID));
|
|
#endif /* __FreeBSD__ */
|
|
}
|
|
|
|
if (config_pas_hw (hw_config))
|
|
{
|
|
|
|
#ifndef EXCLUDE_AUDIO
|
|
mem_start = pas_pcm_init (mem_start, hw_config);
|
|
#endif
|
|
|
|
#if !defined(EXCLUDE_SB_EMULATION) && !defined(EXCLUDE_SB)
|
|
|
|
sb_dsp_disable_midi (); /*
|
|
* The SB emulation don't support *
|
|
* midi
|
|
*/
|
|
#endif
|
|
|
|
#ifndef EXCLUDE_YM3812
|
|
enable_opl3_mode (0x388, 0x38a, 0);
|
|
#endif
|
|
|
|
#ifndef EXCLUDE_MIDI
|
|
#ifdef EXCLUDE_PRO_MIDI
|
|
mem_start = pas_midi_init (mem_start);
|
|
#endif
|
|
#endif
|
|
|
|
pas_init_mixer ();
|
|
}
|
|
}
|
|
|
|
return mem_start;
|
|
}
|
|
|
|
int
|
|
probe_pas (struct address_info *hw_config)
|
|
{
|
|
return detect_pas_hw (hw_config);
|
|
}
|
|
|
|
#endif
|