Marius Strobl 97202af2dc - Add a uart_rxready() and corresponding device-specific implementations ... that can be used to check whether receive data is ready, i.e. whether the subsequent call of uart_poll() should return a char, and unlike uart_poll() doesn't actually receive data. - Remove the device-specific implementations of uart_poll() and implement uart_poll() in terms of uart_getc() and the newly added uart_rxready() in order to minimize code duplication. - In sunkbd(4) take advantage of uart_rxready() and use it to implement the polled mode part of sunkbd_check() so we don't need to buffer a potentially read char in the softc. - Fix some mis-indentation in sunkbd_read_char(). Discussed with: marcel		2007-01-18 22:01:19 +00:00
..
at91_mci.c	MFp4: Read access require PDC to be setup first otherwise we might get	2007-01-05 01:18:32 +00:00
at91_mcireg.h	MMC/SD bridge driver (host adapter) for AT91RM9200's MCI interface.	2006-10-20 06:44:04 +00:00
at91_pdcreg.h	Get this to compile :	2006-05-11 14:30:28 +00:00
at91_pio_rm9200.h	Add support for configuring pins to be one of {GPIO, PERIPHERAL A or	2006-07-02 03:50:44 +00:00
at91_pio.c	MFp4:	2006-11-29 08:17:40 +00:00
at91_pioreg.h	Merge from FreeBSD-tsf-6 by way of p4:	2007-01-01 00:46:54 +00:00
at91_piovar.h	MFp4:	2006-07-14 22:22:57 +00:00
at91_pmc.c	MFp4: BWCT boards are using an 16MHz xtal	2007-01-05 01:14:14 +00:00
at91_pmcreg.h	Add the sekelton of support for the Power Management Controller.	2006-03-24 07:37:56 +00:00
at91_pmcvar.h	Add the sekelton of support for the Power Management Controller.	2006-03-24 07:37:56 +00:00
at91_rtc.c	Implement the set_time function. Rather pointless with this RTC, as it	2006-07-14 21:37:19 +00:00
at91_rtcreg.h	MFp4:	2006-07-14 22:06:01 +00:00
at91_spi.c	MFp4:	2006-11-29 07:57:02 +00:00
at91_spireg.h	MFp4: Fix bit name for SPI SR register	2007-01-01 00:50:25 +00:00
at91_ssc.c	Commit WIP SSC driver, more work is needed here, but it configures	2006-10-20 07:08:59 +00:00
at91_sscreg.h	MFp4: Status register bits	2006-10-25 07:58:18 +00:00
at91_st.c	MFp4: Use the next possible value for hz instead of defaulting to 128	2007-01-05 02:52:06 +00:00
at91_streg.h
at91_twi.c	Make this work a lot better:	2006-11-29 08:15:59 +00:00
at91_twiio.h
at91_twireg.h
at91_usartreg.h	Remove unused bit definitions.	2006-04-06 04:29:24 +00:00
at91.c	MFp4: Tweak descriptions in preparation for porting to other members of	2006-11-20 06:27:15 +00:00
at91rm92reg.h	Relocate the vector page for AT91, to work around bugs with the LOW_VECTOR	2006-08-28 20:05:00 +00:00
at91var.h
files.at91	MFp4: Make at91_rtc optional to allow other RTC choices	2007-01-05 02:06:53 +00:00
files.kb920x
hints.at91rm9200
hints.at91sam9261
if_ate.c	MFp4: Add VLAN_MTU support	2007-01-05 01:07:59 +00:00
if_atereg.h	MFp4: berndt pointed me at an errata that shows that the stat register	2006-09-07 21:50:01 +00:00
kb920x_machdep.c	Threading cleanup.. part 2 of several.	2006-12-06 06:34:57 +00:00
ohci_atmelarm.c	MFp4:	2006-03-18 01:45:29 +00:00
std.at91	MFp4: Move the parameters that are basically dictated by the AT91	2006-10-25 08:00:11 +00:00
std.kb920x	MFp4: Move the parameters that are basically dictated by the AT91	2006-10-25 08:00:11 +00:00
uart_bus_at91usart.c	Resurrect Skyeye support :	2006-05-13 23:41:16 +00:00
uart_cpu_at91rm9200usart.c	Resurrect Skyeye support :	2006-05-13 23:41:16 +00:00
uart_dev_at91usart.c	- Add a uart_rxready() and corresponding device-specific implementations	2007-01-18 22:01:19 +00:00