5b99748998
o Bite the bullet and create controller types for the 6729 and also for the 673x. Rename the 672x to 6722. o Define minimal extended register info (just register 0xa for reading VS[12]). # I think the last version may have broken 673x controllers, but this should # fix them. Tested on the 6722, but not the 6729. Ideas from: Chiharu Shibata-san's article in bsd-nomads:15866
399 lines
11 KiB
C
399 lines
11 KiB
C
/*
|
|
* Copyright (c) 2001 M. Warner Losh. All Rights Reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <pccard/i82365.h>
|
|
#include <pccard/cardinfo.h>
|
|
#include <pccard/slot.h>
|
|
#include <pccard/pcicvar.h>
|
|
|
|
/* Get pnp IDs */
|
|
#include <isa/isavar.h>
|
|
#include <dev/pcic/i82365reg.h>
|
|
|
|
#include <dev/pccard/pccardvar.h>
|
|
#include "card_if.h"
|
|
|
|
static struct isa_pnp_id pcic_ids[] = {
|
|
{PCIC_PNP_ACTIONTEC, NULL}, /* AEI0218 */
|
|
{PCIC_PNP_IBM3765, NULL}, /* IBM3765 */
|
|
{PCIC_PNP_82365, NULL}, /* PNP0E00 */
|
|
{PCIC_PNP_CL_PD6720, NULL}, /* PNP0E01 */
|
|
{PCIC_PNP_VLSI_82C146, NULL}, /* PNP0E02 */
|
|
{PCIC_PNP_82365_CARDBUS, NULL}, /* PNP0E03 */
|
|
{PCIC_PNP_SCM_SWAPBOX, NULL}, /* SCM0469 */
|
|
{PCIC_NEC_PC9801_102, NULL}, /* NEC8091 */
|
|
{PCIC_NEC_PC9821RA_E01, NULL}, /* NEC8121 */
|
|
{0}
|
|
};
|
|
|
|
static struct {
|
|
const char *name;
|
|
u_int32_t flags;
|
|
} bridges[] = {
|
|
{ "Intel i82365SL-A/B", PCIC_AB_POWER},
|
|
{ "IBM PCIC", PCIC_AB_POWER},
|
|
{ "VLSI 82C146", PCIC_AB_POWER},
|
|
{ "Cirrus logic 6722", PCIC_PD_POWER},
|
|
{ "Cirrus logic 6710", PCIC_PD_POWER},
|
|
{ "Vadem 365", PCIC_VG_POWER},
|
|
{ "Vadem 465", PCIC_VG_POWER},
|
|
{ "Vadem 468", PCIC_VG_POWER},
|
|
{ "Vadem 469", PCIC_VG_POWER},
|
|
{ "Ricoh RF5C296", PCIC_RICOH_POWER},
|
|
{ "Ricoh RF5C396", PCIC_RICOH_POWER},
|
|
{ "IBM KING", PCIC_KING_POWER},
|
|
{ "Intel i82365SL-DF", PCIC_DF_POWER}
|
|
};
|
|
|
|
static pcic_intr_way_t pcic_isa_intr_way;
|
|
static pcic_init_t pcic_isa_init;
|
|
|
|
struct pcic_chip pcic_isa_chip = {
|
|
pcic_isa_intr_way,
|
|
pcic_isa_intr_way,
|
|
pcic_isa_mapirq,
|
|
pcic_isa_init
|
|
};
|
|
|
|
/*
|
|
* Look for an Intel PCIC (or compatible).
|
|
* For each available slot, allocate a PC-CARD slot.
|
|
*/
|
|
static int
|
|
pcic_isa_probe(device_t dev)
|
|
{
|
|
int slotnum, validslots = 0;
|
|
struct pcic_slot *sp;
|
|
struct pcic_slot *sp0;
|
|
struct pcic_slot *sp1;
|
|
struct pcic_slot spsave;
|
|
unsigned char c;
|
|
struct resource *r;
|
|
int rid;
|
|
struct pcic_softc *sc;
|
|
int error;
|
|
|
|
/* Check isapnp ids */
|
|
error = ISA_PNP_PROBE(device_get_parent(dev), dev, pcic_ids);
|
|
if (error == ENXIO)
|
|
return (ENXIO);
|
|
|
|
if (bus_get_resource_start(dev, SYS_RES_IOPORT, 0) == 0)
|
|
bus_set_resource(dev, SYS_RES_IOPORT, 0, PCIC_PORT_0,
|
|
PCIC_NPORT);
|
|
rid = 0;
|
|
r = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 1, RF_ACTIVE);
|
|
if (!r) {
|
|
if (bootverbose)
|
|
device_printf(dev, "Cannot get I/O range\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
sc = (struct pcic_softc *) device_get_softc(dev);
|
|
sc->dev = dev;
|
|
sp = &sc->slots[0];
|
|
for (slotnum = 0; slotnum < PCIC_CARD_SLOTS; slotnum++, sp++) {
|
|
/*
|
|
* Initialise the PCIC slot table.
|
|
*/
|
|
sp->getb = pcic_getb_io;
|
|
sp->putb = pcic_putb_io;
|
|
sp->bst = rman_get_bustag(r);
|
|
sp->bsh = rman_get_bushandle(r);
|
|
sp->offset = slotnum * PCIC_SLOT_SIZE;
|
|
sp->controller = -1;
|
|
}
|
|
|
|
/*
|
|
* Prescan for the broken VLSI chips.
|
|
*
|
|
* According to the Linux PCMCIA code from David Hinds,
|
|
* working chipsets return 0x84 from their (correct) ID ports,
|
|
* while the broken ones would need to be probed at the new
|
|
* offset we set after we assume it's broken.
|
|
*
|
|
* Note: because of this, we may incorrectly detect a single
|
|
* slot vlsi chip as a i82365sl step D. I cannot find a
|
|
* datasheet for the affected chip, so that's the best we can
|
|
* do for now.
|
|
*/
|
|
sp0 = &sc->slots[0];
|
|
sp1 = &sc->slots[1];
|
|
if (sp0->getb(sp0, PCIC_ID_REV) == PCIC_VLSI82C146 &&
|
|
sp1->getb(sp1, PCIC_ID_REV) != PCIC_VLSI82C146) {
|
|
spsave = *sp1;
|
|
sp1->bsh += 4;
|
|
sp1->offset = PCIC_SLOT_SIZE << 1;
|
|
if (sp1->getb(sp1, PCIC_ID_REV) != PCIC_VLSI82C146) {
|
|
*sp1 = spsave;
|
|
} else {
|
|
sp0->controller = PCIC_VLSI;
|
|
sp1->controller = PCIC_VLSI;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Look for normal chipsets here.
|
|
*/
|
|
sp = &sc->slots[0];
|
|
for (slotnum = 0; slotnum < PCIC_CARD_SLOTS; slotnum++, sp++) {
|
|
/*
|
|
* see if there's a PCMCIA controller here
|
|
* Intel PCMCIA controllers use 0x82 and 0x83
|
|
* IBM clone chips use 0x88 and 0x89, apparently
|
|
*/
|
|
c = sp->getb(sp, PCIC_ID_REV);
|
|
sp->revision = -1;
|
|
switch(c) {
|
|
/*
|
|
* 82365 or clones.
|
|
*/
|
|
case PCIC_INTEL0:
|
|
case PCIC_INTEL1:
|
|
sp->controller = PCIC_I82365;
|
|
sp->revision = c & 1;
|
|
/*
|
|
* Check for Vadem chips by unlocking their extra
|
|
* registers and looking for valid ID. Bit 3 in
|
|
* the ID register is normally 0, except when
|
|
* PCIC_VADEMREV is set. Other bridges appear
|
|
* to ignore this frobbing.
|
|
*/
|
|
bus_space_write_1(sp->bst, sp->bsh, PCIC_INDEX, 0x0E);
|
|
bus_space_write_1(sp->bst, sp->bsh, PCIC_INDEX, 0x37);
|
|
pcic_setb(sp, PCIC_VMISC, PCIC_VADEMREV);
|
|
c = sp->getb(sp, PCIC_ID_REV);
|
|
if (c & 0x08) {
|
|
switch (sp->revision = c & 7) {
|
|
case 1:
|
|
sp->controller = PCIC_VG365;
|
|
break;
|
|
case 2:
|
|
sp->controller = PCIC_VG465;
|
|
break;
|
|
case 3:
|
|
sp->controller = PCIC_VG468;
|
|
break;
|
|
default:
|
|
sp->controller = PCIC_VG469;
|
|
break;
|
|
}
|
|
pcic_clrb(sp, PCIC_VMISC, PCIC_VADEMREV);
|
|
}
|
|
|
|
/*
|
|
* Check for RICOH RF5C[23]96 PCMCIA Controller
|
|
*/
|
|
c = sp->getb(sp, PCIC_RICOH_ID);
|
|
if (c == PCIC_RID_396)
|
|
sp->controller = PCIC_RF5C396;
|
|
else if (c == PCIC_RID_296)
|
|
sp->controller = PCIC_RF5C296;
|
|
|
|
break;
|
|
/*
|
|
* Intel i82365sl-DF step or maybe a vlsi 82c146
|
|
* we detected the vlsi case earlier, so if the controller
|
|
* isn't set, we know it is a i82365sl step D.
|
|
*/
|
|
case PCIC_INTEL2:
|
|
if (sp->controller == -1)
|
|
sp->controller = PCIC_I82365SL_DF;
|
|
break;
|
|
case PCIC_IBM1:
|
|
case PCIC_IBM2:
|
|
sp->controller = PCIC_IBM;
|
|
sp->revision = c & 1;
|
|
break;
|
|
case PCIC_IBM3:
|
|
sp->controller = PCIC_IBM_KING;
|
|
sp->revision = c & 1;
|
|
break;
|
|
default:
|
|
continue;
|
|
}
|
|
/*
|
|
* Check for Cirrus logic chips.
|
|
*/
|
|
sp->putb(sp, PCIC_CLCHIP, 0);
|
|
c = sp->getb(sp, PCIC_CLCHIP);
|
|
if ((c & PCIC_CLC_TOGGLE) == PCIC_CLC_TOGGLE) {
|
|
c = sp->getb(sp, PCIC_CLCHIP);
|
|
if ((c & PCIC_CLC_TOGGLE) == 0) {
|
|
if (c & PCIC_CLC_DUAL)
|
|
sp->controller = PCIC_PD6722;
|
|
else
|
|
sp->controller = PCIC_PD6710;
|
|
sp->revision = 8 - ((c & 0x1F) >> 2);
|
|
}
|
|
}
|
|
device_set_desc(dev, bridges[(int) sp->controller].name);
|
|
sc->flags = bridges[(int) sp->controller].flags;
|
|
/*
|
|
* OK it seems we have a PCIC or lookalike.
|
|
* Allocate a slot and initialise the data structures.
|
|
*/
|
|
validslots++;
|
|
sp->slt = (struct slot *) 1;
|
|
/*
|
|
* Modem cards send the speaker audio (dialing noises)
|
|
* to the host's speaker. Cirrus Logic PCIC chips must
|
|
* enable this. There is also a Low Power Dynamic Mode bit
|
|
* that claims to reduce power consumption by 30%, so
|
|
* enable it and hope for the best.
|
|
*/
|
|
if (sp->controller == PCIC_PD6722) {
|
|
pcic_setb(sp, PCIC_MISC1, PCIC_MISC1_SPEAKER);
|
|
pcic_setb(sp, PCIC_MISC2, PCIC_LPDM_EN);
|
|
}
|
|
}
|
|
bus_release_resource(dev, SYS_RES_IOPORT, rid, r);
|
|
return (validslots ? 0 : ENXIO);
|
|
}
|
|
|
|
static int
|
|
pcic_isa_attach(device_t dev)
|
|
{
|
|
struct pcic_softc *sc;
|
|
int rid;
|
|
struct resource *r;
|
|
int irq = 0;
|
|
int error;
|
|
|
|
sc = device_get_softc(dev);
|
|
rid = 0;
|
|
r = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 1, RF_ACTIVE);
|
|
if (!r) {
|
|
pcic_dealloc(dev);
|
|
return (ENXIO);
|
|
}
|
|
sc->iorid = rid;
|
|
sc->iores = r;
|
|
sc->csc_route = pcic_iw_isa;
|
|
sc->func_route = pcic_iw_isa;
|
|
sc->chip = &pcic_isa_chip;
|
|
|
|
rid = 0;
|
|
r = NULL;
|
|
r = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_ACTIVE);
|
|
if (r == NULL && pcic_override_irq != 0) {
|
|
irq = pcic_override_irq;
|
|
r = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, irq, irq, 1,
|
|
RF_ACTIVE);
|
|
}
|
|
if (r && ((1 << (rman_get_start(r))) & PCIC_INT_MASK_ALLOWED) == 0) {
|
|
device_printf(dev,
|
|
"Hardware does not support irq %d, trying polling.\n",
|
|
irq);
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid, r);
|
|
irq = 0;
|
|
r = NULL;
|
|
}
|
|
sc->irqrid = rid;
|
|
sc->irqres = r;
|
|
irq = 0;
|
|
if (r != NULL) {
|
|
error = bus_setup_intr(dev, r, INTR_TYPE_MISC,
|
|
pcic_isa_intr, (void *) sc, &sc->ih);
|
|
if (error) {
|
|
pcic_dealloc(dev);
|
|
return (error);
|
|
}
|
|
irq = rman_get_start(r);
|
|
device_printf(dev, "management irq %d\n", irq);
|
|
}
|
|
sc->irq = irq;
|
|
if (irq == 0) {
|
|
sc->slot_poll = pcic_timeout;
|
|
sc->timeout_ch = timeout(sc->slot_poll, (void *) sc, hz/2);
|
|
device_printf(dev, "Polling mode\n");
|
|
}
|
|
|
|
return (pcic_attach(dev));
|
|
}
|
|
|
|
/*
|
|
* ISA cards can only do ISA interrupts. There's no need to do
|
|
* anything but check args for sanity.
|
|
*/
|
|
static int
|
|
pcic_isa_intr_way(struct pcic_slot *sp, enum pcic_intr_way iw)
|
|
{
|
|
if (iw != pcic_iw_isa)
|
|
return (EINVAL);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* No speicial initialization is necesary for ISA cards.
|
|
*/
|
|
static void
|
|
pcic_isa_init(device_t dev)
|
|
{
|
|
}
|
|
|
|
static device_method_t pcic_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, pcic_isa_probe),
|
|
DEVMETHOD(device_attach, pcic_isa_attach),
|
|
DEVMETHOD(device_detach, bus_generic_detach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
DEVMETHOD(device_suspend, bus_generic_suspend),
|
|
DEVMETHOD(device_resume, bus_generic_resume),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_alloc_resource, pcic_alloc_resource),
|
|
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
|
|
DEVMETHOD(bus_activate_resource, pcic_activate_resource),
|
|
DEVMETHOD(bus_deactivate_resource, pcic_deactivate_resource),
|
|
DEVMETHOD(bus_setup_intr, pcic_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr, pcic_teardown_intr),
|
|
|
|
/* Card interface */
|
|
DEVMETHOD(card_set_res_flags, pcic_set_res_flags),
|
|
DEVMETHOD(card_get_res_flags, pcic_get_res_flags),
|
|
DEVMETHOD(card_set_memory_offset, pcic_set_memory_offset),
|
|
DEVMETHOD(card_get_memory_offset, pcic_get_memory_offset),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t pcic_driver = {
|
|
"pcic",
|
|
pcic_methods,
|
|
sizeof(struct pcic_softc)
|
|
};
|
|
|
|
DRIVER_MODULE(pcic, isa, pcic_driver, pcic_devclass, 0, 0);
|