freebsd-dev/contrib/libpcap/remote-ext.h
Xin LI ada6f083b9 MFV r313676: libpcap 1.8.1
MFC after:	1 month
2017-02-13 08:23:39 +00:00

468 lines
15 KiB
C

/*
* Copyright (c) 2002 - 2003
* NetGroup, Politecnico di Torino (Italy)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Politecnico di Torino nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifndef __REMOTE_EXT_H__
#define __REMOTE_EXT_H__
#ifndef HAVE_REMOTE
#error Please do not include this file directly. Just define HAVE_REMOTE and then include pcap.h
#endif
/*// Definition for Microsoft Visual Studio */
#if _MSC_VER > 1000
#pragma once
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*
* \file remote-ext.h
*
* The goal of this file it to include most of the new definitions that should be
* placed into the pcap.h file.
*
* It includes all new definitions (structures and functions like pcap_open().
* Some of the functions are not really a remote feature, but, right now,
* they are placed here.
*/
/*// All this stuff is public */
/*
* \addtogroup remote_struct
* \{
*/
/*
* \brief Defines the maximum buffer size in which address, port, interface names are kept.
*
* In case the adapter name or such is larger than this value, it is truncated.
* This is not used by the user; however it must be aware that an hostname / interface
* name longer than this value will be truncated.
*/
#define PCAP_BUF_SIZE 1024
/*
* \addtogroup remote_source_ID
* \{
*/
/*
* \brief Internal representation of the type of source in use (file,
* remote/local interface).
*
* This indicates a file, i.e. the user want to open a capture from a local file.
*/
#define PCAP_SRC_FILE 2
/*
* \brief Internal representation of the type of source in use (file,
* remote/local interface).
*
* This indicates a local interface, i.e. the user want to open a capture from
* a local interface. This does not involve the RPCAP protocol.
*/
#define PCAP_SRC_IFLOCAL 3
/*
* \brief Internal representation of the type of source in use (file,
* remote/local interface).
*
* This indicates a remote interface, i.e. the user want to open a capture from
* an interface on a remote host. This does involve the RPCAP protocol.
*/
#define PCAP_SRC_IFREMOTE 4
/*
* \}
*/
/* \addtogroup remote_source_string
*
* The formats allowed by the pcap_open() are the following:
* - file://path_and_filename [opens a local file]
* - rpcap://devicename [opens the selected device devices available on the local host, without using the RPCAP protocol]
* - rpcap://host/devicename [opens the selected device available on a remote host]
* - rpcap://host:port/devicename [opens the selected device available on a remote host, using a non-standard port for RPCAP]
* - adaptername [to open a local adapter; kept for compability, but it is strongly discouraged]
* - (NULL) [to open the first local adapter; kept for compability, but it is strongly discouraged]
*
* The formats allowed by the pcap_findalldevs_ex() are the following:
* - file://folder/ [lists all the files in the given folder]
* - rpcap:// [lists all local adapters]
* - rpcap://host:port/ [lists the devices available on a remote host]
*
* Referring to the 'host' and 'port' parameters, they can be either numeric or literal. Since
* IPv6 is fully supported, these are the allowed formats:
*
* - host (literal): e.g. host.foo.bar
* - host (numeric IPv4): e.g. 10.11.12.13
* - host (numeric IPv4, IPv6 style): e.g. [10.11.12.13]
* - host (numeric IPv6): e.g. [1:2:3::4]
* - port: can be either numeric (e.g. '80') or literal (e.g. 'http')
*
* Here you find some allowed examples:
* - rpcap://host.foo.bar/devicename [everything literal, no port number]
* - rpcap://host.foo.bar:1234/devicename [everything literal, with port number]
* - rpcap://10.11.12.13/devicename [IPv4 numeric, no port number]
* - rpcap://10.11.12.13:1234/devicename [IPv4 numeric, with port number]
* - rpcap://[10.11.12.13]:1234/devicename [IPv4 numeric with IPv6 format, with port number]
* - rpcap://[1:2:3::4]/devicename [IPv6 numeric, no port number]
* - rpcap://[1:2:3::4]:1234/devicename [IPv6 numeric, with port number]
* - rpcap://[1:2:3::4]:http/devicename [IPv6 numeric, with literal port number]
*
* \{
*/
/*
* \brief String that will be used to determine the type of source in use (file,
* remote/local interface).
*
* This string will be prepended to the interface name in order to create a string
* that contains all the information required to open the source.
*
* This string indicates that the user wants to open a capture from a local file.
*/
#define PCAP_SRC_FILE_STRING "file://"
/*
* \brief String that will be used to determine the type of source in use (file,
* remote/local interface).
*
* This string will be prepended to the interface name in order to create a string
* that contains all the information required to open the source.
*
* This string indicates that the user wants to open a capture from a network interface.
* This string does not necessarily involve the use of the RPCAP protocol. If the
* interface required resides on the local host, the RPCAP protocol is not involved
* and the local functions are used.
*/
#define PCAP_SRC_IF_STRING "rpcap://"
/*
* \}
*/
/*
* \addtogroup remote_open_flags
* \{
*/
/*
* \brief Defines if the adapter has to go in promiscuous mode.
*
* It is '1' if you have to open the adapter in promiscuous mode, '0' otherwise.
* Note that even if this parameter is false, the interface could well be in promiscuous
* mode for some other reason (for example because another capture process with
* promiscuous mode enabled is currently using that interface).
* On on Linux systems with 2.2 or later kernels (that have the "any" device), this
* flag does not work on the "any" device; if an argument of "any" is supplied,
* the 'promisc' flag is ignored.
*/
#define PCAP_OPENFLAG_PROMISCUOUS 1
/*
* \brief Defines if the data transfer (in case of a remote
* capture) has to be done with UDP protocol.
*
* If it is '1' if you want a UDP data connection, '0' if you want
* a TCP data connection; control connection is always TCP-based.
* A UDP connection is much lighter, but it does not guarantee that all
* the captured packets arrive to the client workstation. Moreover,
* it could be harmful in case of network congestion.
* This flag is meaningless if the source is not a remote interface.
* In that case, it is simply ignored.
*/
#define PCAP_OPENFLAG_DATATX_UDP 2
/*
* \brief Defines if the remote probe will capture its own generated traffic.
*
* In case the remote probe uses the same interface to capture traffic and to send
* data back to the caller, the captured traffic includes the RPCAP traffic as well.
* If this flag is turned on, the RPCAP traffic is excluded from the capture, so that
* the trace returned back to the collector is does not include this traffic.
*/
#define PCAP_OPENFLAG_NOCAPTURE_RPCAP 4
/*
* \brief Defines if the local adapter will capture its own generated traffic.
*
* This flag tells the underlying capture driver to drop the packets that were sent by itself.
* This is useful when building applications like bridges, that should ignore the traffic
* they just sent.
*/
#define PCAP_OPENFLAG_NOCAPTURE_LOCAL 8
/*
* \brief This flag configures the adapter for maximum responsiveness.
*
* In presence of a large value for nbytes, WinPcap waits for the arrival of several packets before
* copying the data to the user. This guarantees a low number of system calls, i.e. lower processor usage,
* i.e. better performance, which is good for applications like sniffers. If the user sets the
* PCAP_OPENFLAG_MAX_RESPONSIVENESS flag, the capture driver will copy the packets as soon as the application
* is ready to receive them. This is suggested for real time applications (like, for example, a bridge)
* that need the best responsiveness.
*/
#define PCAP_OPENFLAG_MAX_RESPONSIVENESS 16
/*
* \}
*/
/*
* \addtogroup remote_samp_methods
* \{
*/
/*
*\brief No sampling has to be done on the current capture.
*
* In this case, no sampling algorithms are applied to the current capture.
*/
#define PCAP_SAMP_NOSAMP 0
/*
* \brief It defines that only 1 out of N packets must be returned to the user.
*
* In this case, the 'value' field of the 'pcap_samp' structure indicates the
* number of packets (minus 1) that must be discarded before one packet got accepted.
* In other words, if 'value = 10', the first packet is returned to the caller, while
* the following 9 are discarded.
*/
#define PCAP_SAMP_1_EVERY_N 1
/*
* \brief It defines that we have to return 1 packet every N milliseconds.
*
* In this case, the 'value' field of the 'pcap_samp' structure indicates the 'waiting
* time' in milliseconds before one packet got accepted.
* In other words, if 'value = 10', the first packet is returned to the caller; the next
* returned one will be the first packet that arrives when 10ms have elapsed.
*/
#define PCAP_SAMP_FIRST_AFTER_N_MS 2
/*
* \}
*/
/*
* \addtogroup remote_auth_methods
* \{
*/
/*
* \brief It defines the NULL authentication.
*
* This value has to be used within the 'type' member of the pcap_rmtauth structure.
* The 'NULL' authentication has to be equal to 'zero', so that old applications
* can just put every field of struct pcap_rmtauth to zero, and it does work.
*/
#define RPCAP_RMTAUTH_NULL 0
/*
* \brief It defines the username/password authentication.
*
* With this type of authentication, the RPCAP protocol will use the username/
* password provided to authenticate the user on the remote machine. If the
* authentication is successful (and the user has the right to open network devices)
* the RPCAP connection will continue; otherwise it will be dropped.
*
* This value has to be used within the 'type' member of the pcap_rmtauth structure.
*/
#define RPCAP_RMTAUTH_PWD 1
/*
* \}
*/
/*
* \brief This structure keeps the information needed to autheticate
* the user on a remote machine.
*
* The remote machine can either grant or refuse the access according
* to the information provided.
* In case the NULL authentication is required, both 'username' and
* 'password' can be NULL pointers.
*
* This structure is meaningless if the source is not a remote interface;
* in that case, the functions which requires such a structure can accept
* a NULL pointer as well.
*/
struct pcap_rmtauth
{
/*
* \brief Type of the authentication required.
*
* In order to provide maximum flexibility, we can support different types
* of authentication based on the value of this 'type' variable. The currently
* supported authentication methods are defined into the
* \link remote_auth_methods Remote Authentication Methods Section\endlink.
*/
int type;
/*
* \brief Zero-terminated string containing the username that has to be
* used on the remote machine for authentication.
*
* This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication
* and it can be NULL.
*/
char *username;
/*
* \brief Zero-terminated string containing the password that has to be
* used on the remote machine for authentication.
*
* This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication
* and it can be NULL.
*/
char *password;
};
/*
* \brief This structure defines the information related to sampling.
*
* In case the sampling is requested, the capturing device should read
* only a subset of the packets coming from the source. The returned packets depend
* on the sampling parameters.
*
* \warning The sampling process is applied <strong>after</strong> the filtering process.
* In other words, packets are filtered first, then the sampling process selects a
* subset of the 'filtered' packets and it returns them to the caller.
*/
struct pcap_samp
{
/*
* Method used for sampling. Currently, the supported methods are listed in the
* \link remote_samp_methods Sampling Methods Section\endlink.
*/
int method;
/*
* This value depends on the sampling method defined. For its meaning, please check
* at the \link remote_samp_methods Sampling Methods Section\endlink.
*/
int value;
};
// Maximum length of an host name (needed for the RPCAP active mode)
#define RPCAP_HOSTLIST_SIZE 1024
/*
* \}
*/ // end of public documentation
// Exported functions
/*
* \name New WinPcap functions
*
* This section lists the new functions that are able to help considerably in writing
* WinPcap programs because of their easiness of use.
*/
// \{
PCAP_API pcap_t *pcap_open(const char *source, int snaplen, int flags, int read_timeout, struct pcap_rmtauth *auth, char *errbuf);
PCAP_API int pcap_createsrcstr(char *source, int type, const char *host, const char *port, const char *name, char *errbuf);
PCAP_API int pcap_parsesrcstr(const char *source, int *type, char *host, char *port, char *name, char *errbuf);
PCAP_API int pcap_findalldevs_ex(char *source, struct pcap_rmtauth *auth, pcap_if_t **alldevs, char *errbuf);
PCAP_API struct pcap_samp *pcap_setsampling(pcap_t *p);
// \}
// End of new WinPcap functions
/*
* \name Remote Capture functions
*/
/*
* Some minor differences between UN*X sockets and and Winsock sockets.
*/
#ifndef _WIN32
/*!
* \brief In Winsock, a socket handle is of type SOCKET; in UN*X, it's
* a file descriptor, and therefore a signed integer.
* We define SOCKET to be a signed integer on UN*X, so that it can
* be used on both platforms.
*/
#define SOCKET int
/*!
* \brief In Winsock, the error return if socket() fails is INVALID_SOCKET;
* in UN*X, it's -1.
* We define INVALID_SOCKET to be -1 on UN*X, so that it can be used on
* both platforms.
*/
#define INVALID_SOCKET -1
#endif
// \{
PCAP_API SOCKET pcap_remoteact_accept(const char *address, const char *port, const char *hostlist, char *connectinghost, struct pcap_rmtauth *auth, char *errbuf);
PCAP_API int pcap_remoteact_list(char *hostlist, char sep, int size, char *errbuf);
PCAP_API int pcap_remoteact_close(const char *host, char *errbuf);
PCAP_API void pcap_remoteact_cleanup();
// \}
// End of remote capture functions
#ifdef __cplusplus
}
#endif
#endif