freebsd-dev/sys/dev/usb/usbdi.c
Bill Paul ed63a7aaef This commit adds device driver support for the ADMtek AN986 Pegasus
USB ethernet chip. Adapters that use this chip include the LinkSys
USB100TX. There are a few others, but I'm not certain of their
availability in the U.S. I used an ADMtek eval board for development.
Note that while the ADMtek chip is a 100Mbps device, you can't really
get 100Mbps speeds over USB. Regardless, this driver uses miibus to
allow speed and duplex mode selection as well as autonegotiation.
Building and kldloading the driver as a module is also supported.

Note that in order to make this driver work, I had to make what some
may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer()
function will use tsleep() for synchronous transfers that don't complete
right away. This is a problem since there are times when we need to
do sync transfers from an interrupt context (i.e. when reading registers
from the MAC via the control endpoint), where tsleep() us a no-no.
My hack allows the driver to have the code poll for transfer completion
subject to the xfer->timeout timeout rather that calling tsleep().
This hack is controlled by a quirk entry and is only enabled for the
ADMtek device.

Now, I'm sure there are a few of you out there ready to jump on me
and suggest some other approach that doesn't involve a busy wait. The
only solution that might work is to handle the interrupts in a kernel
thread, where you may have something resembling a process context that
makes it okay to tsleep(). This is lovely, except we don't have any
mechanism like that now, and I'm not about to implement such a thing
myself since it's beyond the scope of driver development. (Translation:
I'll be damned if I know how to do it.) If FreeBSD ever aquires such
a mechanism, I'll be glad to revisit the driver to take advantage of
it. In the meantime, I settled for what I perceived to be the solution
that involved the least amount of code changes. In general, the hit
is pretty light.

Also note that my only USB test box has a UHCI controller: I haven't
I don't have a machine with an OHCI controller available.

Highlights:

- Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part.
- Updated usbdevs and regenerated generated files
- Updated HARDWARE.TXT and RELNOTES.TXT files
- Updated sysinstall/device.c and userconfig.c
- Updated kernel configs -- device aue0 is commented out by default
- Updated /sys/conf/files
- Added new kld module directory
1999-12-28 02:01:18 +00:00

1083 lines
25 KiB
C

/* $NetBSD: usbdi.c,v 1.51 1999/11/18 23:32:33 augustss Exp $ */
/* $FreeBSD$ */
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (augustss@carlstedt.se) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/systm.h>
#if defined(__NetBSD__) || defined(__OpenBSD__)
#include <sys/kernel.h>
#include <sys/device.h>
#elif defined(__FreeBSD__)
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include "usb_if.h"
#if defined(DIAGNOSTIC) && defined(__i386__)
#include <machine/cpu.h>
#endif
#endif
#include <sys/malloc.h>
#include <sys/proc.h>
#include <machine/bus.h>
#include <machine/clock.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usb_mem.h>
#include <dev/usb/usb_quirks.h>
#if defined(__FreeBSD__)
#include "usb_if.h"
#endif
#ifdef USB_DEBUG
#define DPRINTF(x) if (usbdebug) logprintf x
#define DPRINTFN(n,x) if (usbdebug>(n)) logprintf x
extern int usbdebug;
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif
static usbd_status usbd_ar_pipe __P((usbd_pipe_handle pipe));
static void usbd_do_request_async_cb
__P((usbd_xfer_handle, usbd_private_handle, usbd_status));
static void usbd_start_next __P((usbd_pipe_handle pipe));
static SIMPLEQ_HEAD(, usbd_xfer) usbd_free_xfers =
SIMPLEQ_HEAD_INITIALIZER(usbd_free_xfers);
static int usbd_nbuses = 0;
void
usbd_init()
{
usbd_nbuses++;
}
void
usbd_finish()
{
usbd_xfer_handle xfer;
if (--usbd_nbuses == 0) {
/* Last controller is gone, free all xfers. */
for (;;) {
xfer = SIMPLEQ_FIRST(&usbd_free_xfers);
if (xfer == NULL)
break;
SIMPLEQ_REMOVE_HEAD(&usbd_free_xfers, xfer, next);
free(xfer, M_USB);
}
}
}
static __inline int usbd_xfer_isread __P((usbd_xfer_handle xfer));
static __inline int
usbd_xfer_isread(xfer)
usbd_xfer_handle xfer;
{
if (xfer->rqflags & URQ_REQUEST)
return (xfer->request.bmRequestType & UT_READ);
else
return (xfer->pipe->endpoint->edesc->bEndpointAddress &
UE_DIR_IN);
}
#ifdef USB_DEBUG
void usbd_dump_queue __P((usbd_pipe_handle));
void
usbd_dump_queue(pipe)
usbd_pipe_handle pipe;
{
usbd_xfer_handle xfer;
printf("usbd_dump_queue: pipe=%p\n", pipe);
for (xfer = SIMPLEQ_FIRST(&pipe->queue);
xfer;
xfer = SIMPLEQ_NEXT(xfer, next)) {
printf(" xfer=%p\n", xfer);
}
}
#endif
usbd_status
usbd_open_pipe(iface, address, flags, pipe)
usbd_interface_handle iface;
u_int8_t address;
u_int8_t flags;
usbd_pipe_handle *pipe;
{
usbd_pipe_handle p;
struct usbd_endpoint *ep;
usbd_status err;
int i;
for (i = 0; i < iface->idesc->bNumEndpoints; i++) {
ep = &iface->endpoints[i];
if (ep->edesc == NULL)
return (USBD_IOERROR);
if (ep->edesc->bEndpointAddress == address)
goto found;
}
return (USBD_BAD_ADDRESS);
found:
if ((flags & USBD_EXCLUSIVE_USE) &&
ep->refcnt != 0)
return (USBD_IN_USE);
err = usbd_setup_pipe(iface->device, iface, ep, &p);
if (err)
return (err);
LIST_INSERT_HEAD(&iface->pipes, p, next);
*pipe = p;
return (USBD_NORMAL_COMPLETION);
}
usbd_status
usbd_open_pipe_intr(iface, address, flags, pipe, priv, buffer, length, cb)
usbd_interface_handle iface;
u_int8_t address;
u_int8_t flags;
usbd_pipe_handle *pipe;
usbd_private_handle priv;
void *buffer;
u_int32_t length;
usbd_callback cb;
{
usbd_status err;
usbd_xfer_handle xfer;
usbd_pipe_handle ipipe;
err = usbd_open_pipe(iface, address, USBD_EXCLUSIVE_USE, &ipipe);
if (err)
return (err);
xfer = usbd_alloc_xfer(iface->device);
if (xfer == NULL) {
err = USBD_NOMEM;
goto bad1;
}
usbd_setup_xfer(xfer, ipipe, priv, buffer, length, flags,
USBD_NO_TIMEOUT, cb);
ipipe->intrxfer = xfer;
ipipe->repeat = 1;
err = usbd_transfer(xfer);
*pipe = ipipe;
if (err != USBD_IN_PROGRESS)
goto bad2;
return (USBD_NORMAL_COMPLETION);
bad2:
ipipe->intrxfer = NULL;
ipipe->repeat = 0;
usbd_free_xfer(xfer);
bad1:
usbd_close_pipe(ipipe);
return (err);
}
usbd_status
usbd_close_pipe(pipe)
usbd_pipe_handle pipe;
{
#ifdef DIAGNOSTIC
if (pipe == NULL) {
printf("usbd_close_pipe: pipe==NULL\n");
return (USBD_NORMAL_COMPLETION);
}
#endif
if (--pipe->refcnt != 0)
return (USBD_NORMAL_COMPLETION);
if (SIMPLEQ_FIRST(&pipe->queue) != 0)
return (USBD_PENDING_REQUESTS);
LIST_REMOVE(pipe, next);
pipe->endpoint->refcnt--;
pipe->methods->close(pipe);
if (pipe->intrxfer != NULL)
usbd_free_xfer(pipe->intrxfer);
free(pipe, M_USB);
return (USBD_NORMAL_COMPLETION);
}
usbd_status
usbd_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_pipe_handle pipe = xfer->pipe;
usb_dma_t *dmap = &xfer->dmabuf;
usbd_status err;
u_int size;
int s;
DPRINTFN(5,("usbd_transfer: xfer=%p, flags=%d, pipe=%p, running=%d\n",
xfer, xfer->flags, pipe, pipe->running));
#ifdef USB_DEBUG
if (usbdebug > 5)
usbd_dump_queue(pipe);
#endif
xfer->done = 0;
size = xfer->length;
/* If there is no buffer, allocate one. */
if (!(xfer->rqflags & URQ_DEV_DMABUF) && size != 0) {
struct usbd_bus *bus = pipe->device->bus;
#ifdef DIAGNOSTIC
if (xfer->rqflags & URQ_AUTO_DMABUF)
printf("usbd_transfer: has old buffer!\n");
#endif
err = bus->methods->allocm(bus, dmap, size);
if (err)
return (err);
xfer->rqflags |= URQ_AUTO_DMABUF;
}
/* Copy data if going out. */
if (!(xfer->flags & USBD_NO_COPY) && size != 0 &&
!usbd_xfer_isread(xfer))
memcpy(KERNADDR(dmap), xfer->buffer, size);
err = pipe->methods->transfer(xfer);
if (err != USBD_IN_PROGRESS && err) {
/* The transfer has not been queued, so free buffer. */
if (xfer->rqflags & URQ_AUTO_DMABUF) {
struct usbd_bus *bus = pipe->device->bus;
bus->methods->freem(bus, &xfer->dmabuf);
xfer->rqflags &= ~URQ_AUTO_DMABUF;
}
}
if (!(xfer->flags & USBD_SYNCHRONOUS))
return (err);
/* Sync transfer, wait for completion. */
if (err != USBD_IN_PROGRESS)
return (err);
s = splusb();
if (!xfer->done) {
if (pipe->device->bus->use_polling)
panic("usbd_transfer: not done\n");
if (pipe->device->quirks->uq_flags & UQ_NO_TSLEEP) {
int i;
for (i = 0; i < xfer->timeout + 1; i++) {
DELAY(1);
pipe->device->bus->methods->do_poll(pipe->device->bus);
if (xfer->done)
break;
}
if (!xfer->done)
pipe->methods->abort(xfer);
} else
tsleep(xfer, PRIBIO, "usbsyn", 0);
}
splx(s);
return (xfer->status);
}
/* Like usbd_transfer(), but waits for completion. */
usbd_status
usbd_sync_transfer(xfer)
usbd_xfer_handle xfer;
{
xfer->flags |= USBD_SYNCHRONOUS;
return (usbd_transfer(xfer));
}
void *
usbd_alloc_buffer(xfer, size)
usbd_xfer_handle xfer;
u_int32_t size;
{
struct usbd_bus *bus = xfer->device->bus;
usbd_status err;
err = bus->methods->allocm(bus, &xfer->dmabuf, size);
if (err)
return (0);
xfer->rqflags |= URQ_DEV_DMABUF;
return (KERNADDR(&xfer->dmabuf));
}
void
usbd_free_buffer(xfer)
usbd_xfer_handle xfer;
{
#ifdef DIAGNOSTIC
if (!(xfer->rqflags & (URQ_DEV_DMABUF | URQ_AUTO_DMABUF))) {
printf("usbd_free_buffer: no buffer\n");
return;
}
#endif
xfer->rqflags &= ~(URQ_DEV_DMABUF | URQ_AUTO_DMABUF);
xfer->device->bus->methods->freem(xfer->device->bus, &xfer->dmabuf);
}
void *
usbd_get_buffer(xfer)
usbd_xfer_handle xfer;
{
if (!(xfer->rqflags & URQ_DEV_DMABUF))
return (0);
return (KERNADDR(&xfer->dmabuf));
}
usbd_xfer_handle
usbd_alloc_xfer(dev)
usbd_device_handle dev;
{
usbd_xfer_handle xfer;
xfer = SIMPLEQ_FIRST(&usbd_free_xfers);
if (xfer != NULL)
SIMPLEQ_REMOVE_HEAD(&usbd_free_xfers, xfer, next);
else
xfer = malloc(sizeof(*xfer), M_USB, M_NOWAIT);
if (xfer == NULL)
return (0);
memset(xfer, 0, sizeof *xfer);
xfer->device = dev;
DPRINTFN(5,("usbd_alloc_xfer() = %p\n", xfer));
return (xfer);
}
usbd_status
usbd_free_xfer(xfer)
usbd_xfer_handle xfer;
{
DPRINTFN(5,("usbd_free_xfer: %p\n", xfer));
if (xfer->rqflags & (URQ_DEV_DMABUF | URQ_AUTO_DMABUF))
usbd_free_buffer(xfer);
SIMPLEQ_INSERT_HEAD(&usbd_free_xfers, xfer, next);
return (USBD_NORMAL_COMPLETION);
}
void
usbd_setup_xfer(xfer, pipe, priv, buffer, length, flags, timeout, callback)
usbd_xfer_handle xfer;
usbd_pipe_handle pipe;
usbd_private_handle priv;
void *buffer;
u_int32_t length;
u_int16_t flags;
u_int32_t timeout;
void (*callback) __P((usbd_xfer_handle,
usbd_private_handle,
usbd_status));
{
xfer->pipe = pipe;
xfer->priv = priv;
xfer->buffer = buffer;
xfer->length = length;
xfer->actlen = 0;
xfer->flags = flags;
xfer->timeout = timeout;
xfer->status = USBD_NOT_STARTED;
xfer->callback = callback;
xfer->rqflags &= ~URQ_REQUEST;
xfer->nframes = 0;
}
void
usbd_setup_default_xfer(xfer, dev, priv, timeout, req, buffer,
length, flags, callback)
usbd_xfer_handle xfer;
usbd_device_handle dev;
usbd_private_handle priv;
u_int32_t timeout;
usb_device_request_t *req;
void *buffer;
u_int32_t length;
u_int16_t flags;
void (*callback) __P((usbd_xfer_handle,
usbd_private_handle,
usbd_status));
{
xfer->pipe = dev->default_pipe;
xfer->priv = priv;
xfer->buffer = buffer;
xfer->length = length;
xfer->actlen = 0;
xfer->flags = flags;
xfer->timeout = timeout;
xfer->status = USBD_NOT_STARTED;
xfer->callback = callback;
xfer->request = *req;
xfer->rqflags |= URQ_REQUEST;
xfer->nframes = 0;
}
void
usbd_setup_isoc_xfer(xfer, pipe, priv, frlengths, nframes, flags, callback)
usbd_xfer_handle xfer;
usbd_pipe_handle pipe;
usbd_private_handle priv;
u_int16_t *frlengths;
u_int32_t nframes;
u_int16_t flags;
usbd_callback callback;
{
xfer->pipe = pipe;
xfer->priv = priv;
xfer->buffer = 0;
xfer->length = 0;
xfer->actlen = 0;
xfer->flags = flags;
xfer->timeout = USBD_NO_TIMEOUT;
xfer->status = USBD_NOT_STARTED;
xfer->callback = callback;
xfer->rqflags &= ~URQ_REQUEST;
xfer->frlengths = frlengths;
xfer->nframes = nframes;
}
void
usbd_get_xfer_status(xfer, priv, buffer, count, status)
usbd_xfer_handle xfer;
usbd_private_handle *priv;
void **buffer;
u_int32_t *count;
usbd_status *status;
{
if (priv != NULL)
*priv = xfer->priv;
if (buffer != NULL)
*buffer = xfer->buffer;
if (count != NULL)
*count = xfer->actlen;
if (status != NULL)
*status = xfer->status;
}
usb_config_descriptor_t *
usbd_get_config_descriptor(dev)
usbd_device_handle dev;
{
return (dev->cdesc);
}
usb_interface_descriptor_t *
usbd_get_interface_descriptor(iface)
usbd_interface_handle iface;
{
return (iface->idesc);
}
usb_device_descriptor_t *
usbd_get_device_descriptor(dev)
usbd_device_handle dev;
{
return (&dev->ddesc);
}
usb_endpoint_descriptor_t *
usbd_interface2endpoint_descriptor(iface, index)
usbd_interface_handle iface;
u_int8_t index;
{
if (index >= iface->idesc->bNumEndpoints)
return (0);
return (iface->endpoints[index].edesc);
}
usbd_status
usbd_abort_pipe(pipe)
usbd_pipe_handle pipe;
{
usbd_status err;
int s;
#ifdef DIAGNOSTIC
if (pipe == NULL) {
printf("usbd_close_pipe: pipe==NULL\n");
return (USBD_NORMAL_COMPLETION);
}
#endif
s = splusb();
err = usbd_ar_pipe(pipe);
splx(s);
return (err);
}
usbd_status
usbd_clear_endpoint_stall(pipe)
usbd_pipe_handle pipe;
{
usbd_device_handle dev = pipe->device;
usb_device_request_t req;
usbd_status err;
DPRINTFN(8, ("usbd_clear_endpoint_stall\n"));
/*
* Clearing en endpoint stall resets the enpoint toggle, so
* do the same to the HC toggle.
*/
pipe->methods->cleartoggle(pipe);
req.bmRequestType = UT_WRITE_ENDPOINT;
req.bRequest = UR_CLEAR_FEATURE;
USETW(req.wValue, UF_ENDPOINT_HALT);
USETW(req.wIndex, pipe->endpoint->edesc->bEndpointAddress);
USETW(req.wLength, 0);
err = usbd_do_request(dev, &req, 0);
#if 0
XXX should we do this?
if (!err) {
pipe->state = USBD_PIPE_ACTIVE;
/* XXX activate pipe */
}
#endif
return (err);
}
usbd_status
usbd_clear_endpoint_stall_async(pipe)
usbd_pipe_handle pipe;
{
usbd_device_handle dev = pipe->device;
usb_device_request_t req;
usbd_status err;
pipe->methods->cleartoggle(pipe);
req.bmRequestType = UT_WRITE_ENDPOINT;
req.bRequest = UR_CLEAR_FEATURE;
USETW(req.wValue, UF_ENDPOINT_HALT);
USETW(req.wIndex, pipe->endpoint->edesc->bEndpointAddress);
USETW(req.wLength, 0);
err = usbd_do_request_async(dev, &req, 0);
return (err);
}
usbd_status
usbd_endpoint_count(iface, count)
usbd_interface_handle iface;
u_int8_t *count;
{
*count = iface->idesc->bNumEndpoints;
return (USBD_NORMAL_COMPLETION);
}
usbd_status
usbd_interface_count(dev, count)
usbd_device_handle dev;
u_int8_t *count;
{
if (dev->cdesc == NULL)
return (USBD_NOT_CONFIGURED);
*count = dev->cdesc->bNumInterface;
return (USBD_NORMAL_COMPLETION);
}
usbd_status
usbd_interface2device_handle(iface, dev)
usbd_interface_handle iface;
usbd_device_handle *dev;
{
*dev = iface->device;
return (USBD_NORMAL_COMPLETION);
}
usbd_status
usbd_device2interface_handle(dev, ifaceno, iface)
usbd_device_handle dev;
u_int8_t ifaceno;
usbd_interface_handle *iface;
{
if (dev->cdesc == NULL)
return (USBD_NOT_CONFIGURED);
if (ifaceno >= dev->cdesc->bNumInterface)
return (USBD_INVAL);
*iface = &dev->ifaces[ifaceno];
return (USBD_NORMAL_COMPLETION);
}
usbd_device_handle
usbd_pipe2device_handle(pipe)
usbd_pipe_handle pipe;
{
return (pipe->device);
}
/* XXXX use altno */
usbd_status
usbd_set_interface(iface, altidx)
usbd_interface_handle iface;
int altidx;
{
usb_device_request_t req;
usbd_status err;
if (LIST_FIRST(&iface->pipes) != 0)
return (USBD_IN_USE);
if (iface->endpoints)
free(iface->endpoints, M_USB);
iface->endpoints = 0;
iface->idesc = 0;
err = usbd_fill_iface_data(iface->device, iface->index, altidx);
if (err)
return (err);
req.bmRequestType = UT_WRITE_INTERFACE;
req.bRequest = UR_SET_INTERFACE;
USETW(req.wValue, iface->idesc->bAlternateSetting);
USETW(req.wIndex, iface->idesc->bInterfaceNumber);
USETW(req.wLength, 0);
return (usbd_do_request(iface->device, &req, 0));
}
int
usbd_get_no_alts(cdesc, ifaceno)
usb_config_descriptor_t *cdesc;
int ifaceno;
{
char *p = (char *)cdesc;
char *end = p + UGETW(cdesc->wTotalLength);
usb_interface_descriptor_t *d;
int n;
for (n = 0; p < end; p += d->bLength) {
d = (usb_interface_descriptor_t *)p;
if (p + d->bLength <= end &&
d->bDescriptorType == UDESC_INTERFACE &&
d->bInterfaceNumber == ifaceno)
n++;
}
return (n);
}
int
usbd_get_interface_altindex(iface)
usbd_interface_handle iface;
{
return (iface->altindex);
}
usbd_status
usbd_get_interface(iface, aiface)
usbd_interface_handle iface;
u_int8_t *aiface;
{
usb_device_request_t req;
req.bmRequestType = UT_READ_INTERFACE;
req.bRequest = UR_GET_INTERFACE;
USETW(req.wValue, 0);
USETW(req.wIndex, iface->idesc->bInterfaceNumber);
USETW(req.wLength, 1);
return (usbd_do_request(iface->device, &req, aiface));
}
/*** Internal routines ***/
/* Dequeue all pipe operations, called at splusb(). */
static usbd_status
usbd_ar_pipe(pipe)
usbd_pipe_handle pipe;
{
usbd_xfer_handle xfer;
SPLUSBCHECK;
DPRINTFN(2,("usbd_ar_pipe: pipe=%p\n", pipe));
#ifdef USB_DEBUG
if (usbdebug > 5)
usbd_dump_queue(pipe);
#endif
pipe->repeat = 0;
while ((xfer = SIMPLEQ_FIRST(&pipe->queue)) != NULL) {
DPRINTFN(2,("usbd_ar_pipe: pipe=%p xfer=%p (methods=%p)\n",
pipe, xfer, pipe->methods));
/* Make the HC abort it (and invoke the callback). */
pipe->methods->abort(xfer);
/* XXX only for non-0 usbd_clear_endpoint_stall(pipe); */
}
return (USBD_NORMAL_COMPLETION);
}
/* Called at splusb() */
void
usb_transfer_complete(xfer)
usbd_xfer_handle xfer;
{
usbd_pipe_handle pipe = xfer->pipe;
usb_dma_t *dmap = &xfer->dmabuf;
int repeat = pipe->repeat;
int polling;
SPLUSBCHECK;
DPRINTFN(5, ("usb_transfer_complete: pipe=%p xfer=%p status=%d "
"actlen=%d\n", pipe, xfer, xfer->status, xfer->actlen));
#ifdef DIAGNOSTIC
if (pipe == NULL) {
printf("usbd_transfer_cb: pipe==0, xfer=%p\n", xfer);
return;
}
#endif
polling = pipe->device->bus->use_polling;
/* XXXX */
if (polling)
pipe->running = 0;
if (!(xfer->flags & USBD_NO_COPY) && xfer->actlen != 0 &&
usbd_xfer_isread(xfer)) {
#ifdef DIAGNOSTIC
if (xfer->actlen > xfer->length) {
printf("usb_transfer_complete: actlen > len %d > %d\n",
xfer->actlen, xfer->length);
xfer->actlen = xfer->length;
}
#endif
memcpy(xfer->buffer, KERNADDR(dmap), xfer->actlen);
}
/* if we allocated the buffer in usbd_transfer() we free it here. */
if (xfer->rqflags & URQ_AUTO_DMABUF) {
if (!repeat) {
struct usbd_bus *bus = pipe->device->bus;
bus->methods->freem(bus, dmap);
xfer->rqflags &= ~URQ_AUTO_DMABUF;
}
}
if (pipe->methods->done != NULL)
pipe->methods->done(xfer);
if (!repeat) {
/* Remove request from queue. */
#ifdef DIAGNOSTIC
if (xfer != SIMPLEQ_FIRST(&pipe->queue))
printf("usb_transfer_complete: bad dequeue %p != %p\n",
xfer, SIMPLEQ_FIRST(&pipe->queue));
#endif
SIMPLEQ_REMOVE_HEAD(&pipe->queue, xfer, next);
}
/* Count completed transfers. */
++pipe->device->bus->stats.requests
[pipe->endpoint->edesc->bmAttributes & UE_XFERTYPE];
xfer->done = 1;
if (!xfer->status && xfer->actlen < xfer->length &&
!(xfer->flags & USBD_SHORT_XFER_OK)) {
DPRINTFN(-1,("usbd_transfer_cb: short transfer %d<%d\n",
xfer->actlen, xfer->length));
xfer->status = USBD_SHORT_XFER;
}
if (xfer->callback)
xfer->callback(xfer, xfer->priv, xfer->status);
if ((xfer->flags & USBD_SYNCHRONOUS) && !polling)
wakeup(xfer);
if (!repeat) {
/* XXX should we stop the queue on all errors? */
if (xfer->status == USBD_CANCELLED ||
xfer->status == USBD_TIMEOUT)
pipe->running = 0;
else
usbd_start_next(pipe);
}
}
usbd_status
usb_insert_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_pipe_handle pipe = xfer->pipe;
usbd_status err;
int s;
DPRINTFN(5,("usb_insert_transfer: pipe=%p running=%d timeout=%d\n",
pipe, pipe->running, xfer->timeout));
s = splusb();
SIMPLEQ_INSERT_TAIL(&pipe->queue, xfer, next);
if (pipe->running)
err = USBD_IN_PROGRESS;
else {
pipe->running = 1;
err = USBD_NORMAL_COMPLETION;
}
splx(s);
return (err);
}
/* Called at splusb() */
void
usbd_start_next(pipe)
usbd_pipe_handle pipe;
{
usbd_xfer_handle xfer;
usbd_status err;
SPLUSBCHECK;
#ifdef DIAGNOSTIC
if (pipe == NULL) {
printf("usbd_start_next: pipe == NULL\n");
return;
}
if (pipe->methods == NULL || pipe->methods->start == NULL) {
printf("usbd_start_next: pipe=%p no start method\n", pipe);
return;
}
#endif
/* Get next request in queue. */
xfer = SIMPLEQ_FIRST(&pipe->queue);
DPRINTFN(5, ("usbd_start_next: pipe=%p, xfer=%p\n", pipe, xfer));
if (xfer == NULL) {
pipe->running = 0;
} else {
err = pipe->methods->start(xfer);
if (err != USBD_IN_PROGRESS) {
printf("usbd_start_next: error=%d\n", err);
pipe->running = 0;
/* XXX do what? */
}
}
}
usbd_status
usbd_do_request(dev, req, data)
usbd_device_handle dev;
usb_device_request_t *req;
void *data;
{
return (usbd_do_request_flags(dev, req, data, 0, 0));
}
usbd_status
usbd_do_request_flags(dev, req, data, flags, actlen)
usbd_device_handle dev;
usb_device_request_t *req;
void *data;
u_int16_t flags;
int *actlen;
{
usbd_xfer_handle xfer;
usbd_status err;
#ifdef DIAGNOSTIC
#if defined(__i386__) && defined(__FreeBSD__)
KASSERT(intr_nesting_level == 0,
("ohci_abort_req in interrupt context"));
#endif
if (dev->bus->intr_context) {
printf("usbd_do_request: not in process context\n");
return (USBD_INVAL);
}
#endif
xfer = usbd_alloc_xfer(dev);
if (xfer == NULL)
return (USBD_NOMEM);
usbd_setup_default_xfer(xfer, dev, 0, USBD_DEFAULT_TIMEOUT, req,
data, UGETW(req->wLength), flags, 0);
err = usbd_sync_transfer(xfer);
#if defined(USB_DEBUG) || defined(DIAGNOSTIC)
if (xfer->actlen > xfer->length)
DPRINTF(("usbd_do_request: overrun addr=%d type=0x%02x req=0x"
"%02x val=%d index=%d rlen=%d length=%d actlen=%d\n",
dev->address, xfer->request.bmRequestType,
xfer->request.bRequest, UGETW(xfer->request.wValue),
UGETW(xfer->request.wIndex),
UGETW(xfer->request.wLength),
xfer->length, xfer->actlen));
#endif
if (actlen != NULL)
*actlen = xfer->actlen;
if (err == USBD_STALLED) {
/*
* The control endpoint has stalled. Control endpoints
* should not halt, but some may do so anyway so clear
* any halt condition.
*/
usb_device_request_t treq;
usb_status_t status;
u_int16_t s;
usbd_status nerr;
treq.bmRequestType = UT_READ_ENDPOINT;
treq.bRequest = UR_GET_STATUS;
USETW(treq.wValue, 0);
USETW(treq.wIndex, 0);
USETW(treq.wLength, sizeof(usb_status_t));
usbd_setup_default_xfer(xfer, dev, 0, USBD_DEFAULT_TIMEOUT,
&treq, &status,sizeof(usb_status_t),
0, 0);
nerr = usbd_sync_transfer(xfer);
if (nerr)
goto bad;
s = UGETW(status.wStatus);
DPRINTF(("usbd_do_request: status = 0x%04x\n", s));
if (!(s & UES_HALT))
goto bad;
treq.bmRequestType = UT_WRITE_ENDPOINT;
treq.bRequest = UR_CLEAR_FEATURE;
USETW(treq.wValue, UF_ENDPOINT_HALT);
USETW(treq.wIndex, 0);
USETW(treq.wLength, 0);
usbd_setup_default_xfer(xfer, dev, 0, USBD_DEFAULT_TIMEOUT,
&treq, &status, 0, 0, 0);
nerr = usbd_sync_transfer(xfer);
if (nerr)
goto bad;
}
bad:
usbd_free_xfer(xfer);
return (err);
}
void
usbd_do_request_async_cb(xfer, priv, status)
usbd_xfer_handle xfer;
usbd_private_handle priv;
usbd_status status;
{
#if defined(USB_DEBUG) || defined(DIAGNOSTIC)
if (xfer->actlen > xfer->length)
DPRINTF(("usbd_do_request: overrun addr=%d type=0x%02x req=0x"
"%02x val=%d index=%d rlen=%d length=%d actlen=%d\n",
xfer->pipe->device->address,
xfer->request.bmRequestType,
xfer->request.bRequest, UGETW(xfer->request.wValue),
UGETW(xfer->request.wIndex),
UGETW(xfer->request.wLength),
xfer->length, xfer->actlen));
#endif
usbd_free_xfer(xfer);
}
/*
* Execute a request without waiting for completion.
* Can be used from interrupt context.
*/
usbd_status
usbd_do_request_async(dev, req, data)
usbd_device_handle dev;
usb_device_request_t *req;
void *data;
{
usbd_xfer_handle xfer;
usbd_status err;
xfer = usbd_alloc_xfer(dev);
if (xfer == NULL)
return (USBD_NOMEM);
usbd_setup_default_xfer(xfer, dev, 0, USBD_DEFAULT_TIMEOUT, req,
data, UGETW(req->wLength), 0, usbd_do_request_async_cb);
err = usbd_transfer(xfer);
if (err != USBD_IN_PROGRESS) {
usbd_free_xfer(xfer);
return (err);
}
return (USBD_NORMAL_COMPLETION);
}
struct usbd_quirks *
usbd_get_quirks(dev)
usbd_device_handle dev;
{
return (dev->quirks);
}
/* XXX do periodic free() of free list */
/*
* Called from keyboard driver when in polling mode.
*/
void
usbd_dopoll(iface)
usbd_interface_handle iface;
{
iface->device->bus->methods->do_poll(iface->device->bus);
}
void
usbd_set_polling(iface, on)
usbd_interface_handle iface;
int on;
{
if (on)
iface->device->bus->use_polling++;
else
iface->device->bus->use_polling--;
}
usb_endpoint_descriptor_t *
usbd_get_endpoint_descriptor(iface, address)
usbd_interface_handle iface;
u_int8_t address;
{
struct usbd_endpoint *ep;
int i;
for (i = 0; i < iface->idesc->bNumEndpoints; i++) {
ep = &iface->endpoints[i];
if (ep->edesc->bEndpointAddress == address)
return (iface->endpoints[i].edesc);
}
return (0);
}
#if defined(__FreeBSD__)
int
usbd_driver_load(module_t mod, int what, void *arg)
{
/* XXX should implement something like a function that removes all generic devices */
return (0);
}
#endif