freebsd-dev/sys/mips/nlm/board_cpld.c
Jayachandran C. ca950537bb Support for EEPROM and CPLD on XLP EVP boards.
On XLP evaluation platform, the board information is stored
in an I2C eeprom and the network block configuration is available
from a CPLD connected to the GBU (NOR flash bus). Add support
for both of these.
2012-03-27 12:25:47 +00:00

114 lines
3.0 KiB
C

/*-
* Copyright (c) 2003-2012 Broadcom Corporation
* All Rights Reserved
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/endian.h>
#include <mips/nlm/hal/mips-extns.h>
#include <mips/nlm/hal/haldefs.h>
#include <mips/nlm/hal/iomap.h>
#include <mips/nlm/hal/gbu.h>
#include <mips/nlm/board.h>
#define CPLD_REVISION 0x0
#define CPLD_RESET 0x1
#define CPLD_CTRL 0x2
#define CPLD_RSVD 0x3
#define CPLD_PWR_CTRL 0x4
#define CPLD_MISC 0x5
#define CPLD_CTRL_STATUS 0x6
#define CPLD_PWR_INTR_STATUS 0x7
#define CPLD_DATA 0x8
static __inline
int nlm_cpld_read(uint64_t base, int reg)
{
uint16_t val;
val = *(volatile uint16_t *)(long)(base + reg * 2);
return bswap16(val);
}
static __inline void
nlm_cpld_write(uint64_t base, int reg, uint16_t data)
{
bswap16(data);
*(volatile uint16_t *)(long)(base + reg * 2) = data;
}
int
nlm_board_cpld_majorversion(uint64_t base)
{
return (nlm_cpld_read(base, CPLD_REVISION) >> 8);
}
int
nlm_board_cpld_minorversion(uint64_t base)
{
return (nlm_cpld_read(base, CPLD_REVISION) & 0xff);
}
uint64_t nlm_board_cpld_base(int node, int chipselect)
{
uint64_t gbubase, cpld_phys;
gbubase = nlm_get_gbu_regbase(node);
cpld_phys = nlm_read_gbu_reg(gbubase, GBU_CS_BASEADDR(chipselect));
return (MIPS_PHYS_TO_KSEG1(cpld_phys << 8));
}
void
nlm_board_cpld_reset(uint64_t base)
{
nlm_cpld_write(base, CPLD_RESET, 1 << 15);
for(;;)
__asm __volatile("wait");
}
/* get daughter board type */
int
nlm_board_cpld_dboard_type(uint64_t base, int slot)
{
uint16_t val;
int shift = 0;
switch (slot) {
case 0: shift = 0; break;
case 1: shift = 4; break;
case 2: shift = 2; break;
case 3: shift = 6; break;
}
val = nlm_cpld_read(base, CPLD_CTRL_STATUS) >> shift;
return (val & 0x3);
}