The scan task refactoring stuff circa 2014-2016 broke the blocking task into a taskqueue with some async bits, but it apparently broke scans being interrupted by traffic. Notably - the new "field" SCAN_PAUSE sets both SCAN_INTERRUPT and SCAN_CANCEL, and a bunch of existing code was checking for SCAN_CANCEL only and breaking the scan. Unfortunately it was then (a) cancelling the scan entirely and (b) not notifying userland that scan was done. So: * Update the calls to scan_end() to only pass in 1 (saying the scan is complete) if SCAN_CANCEL is set WITHOUT SCAN_INTERRUPT. If both are set then yes, the scan is interrupted, but it isn't canceled - it's just paused. * Update the "did the scan flags change whilst the driver was called" logic to check for canceled scans, not interrupted scans. * The "scan done" logic now explicitly checks for either interrupted or completed scans. This accounts for the situation where a scan is being aborted via traffic but it ALSO happens to have finished (ie the last channel was checked.) This doesn't ENTIRELY fix scanning as the resume function is broken due to incorrect ticks math. Thus, the second half of this patch changes the ieee80211_ticks_*() macros to use int instead of long, matching the logic that the TCP code does with ticks and handles wrapping / negative ticks values. If cast to long then the wrapping math wouldn't work right (ie, if ticks was actually negative, ie, after the system has been up for a while.) This allows contbgscan() to correctly calculate if a scan should continue based on ticks and ic->ic_lastdata . Reviewed by: bz Differential Revision: https://reviews.freebsd.org/D25031
677 lines
23 KiB
C
677 lines
23 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
*
|
|
* Copyright (c) 2003-2008 Sam Leffler, Errno Consulting
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
#ifndef _NET80211_IEEE80211_FREEBSD_H_
|
|
#define _NET80211_IEEE80211_FREEBSD_H_
|
|
|
|
#ifdef _KERNEL
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/counter.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/rwlock.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <sys/time.h>
|
|
|
|
/*
|
|
* Common state locking definitions.
|
|
*/
|
|
typedef struct {
|
|
char name[16]; /* e.g. "ath0_com_lock" */
|
|
struct mtx mtx;
|
|
} ieee80211_com_lock_t;
|
|
#define IEEE80211_LOCK_INIT(_ic, _name) do { \
|
|
ieee80211_com_lock_t *cl = &(_ic)->ic_comlock; \
|
|
snprintf(cl->name, sizeof(cl->name), "%s_com_lock", _name); \
|
|
mtx_init(&cl->mtx, cl->name, NULL, MTX_DEF | MTX_RECURSE); \
|
|
} while (0)
|
|
#define IEEE80211_LOCK_OBJ(_ic) (&(_ic)->ic_comlock.mtx)
|
|
#define IEEE80211_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_LOCK_OBJ(_ic))
|
|
#define IEEE80211_LOCK(_ic) mtx_lock(IEEE80211_LOCK_OBJ(_ic))
|
|
#define IEEE80211_UNLOCK(_ic) mtx_unlock(IEEE80211_LOCK_OBJ(_ic))
|
|
#define IEEE80211_LOCK_ASSERT(_ic) \
|
|
mtx_assert(IEEE80211_LOCK_OBJ(_ic), MA_OWNED)
|
|
#define IEEE80211_UNLOCK_ASSERT(_ic) \
|
|
mtx_assert(IEEE80211_LOCK_OBJ(_ic), MA_NOTOWNED)
|
|
|
|
/*
|
|
* Transmit lock.
|
|
*
|
|
* This is a (mostly) temporary lock designed to serialise all of the
|
|
* transmission operations throughout the stack.
|
|
*/
|
|
typedef struct {
|
|
char name[16]; /* e.g. "ath0_tx_lock" */
|
|
struct mtx mtx;
|
|
} ieee80211_tx_lock_t;
|
|
#define IEEE80211_TX_LOCK_INIT(_ic, _name) do { \
|
|
ieee80211_tx_lock_t *cl = &(_ic)->ic_txlock; \
|
|
snprintf(cl->name, sizeof(cl->name), "%s_tx_lock", _name); \
|
|
mtx_init(&cl->mtx, cl->name, NULL, MTX_DEF); \
|
|
} while (0)
|
|
#define IEEE80211_TX_LOCK_OBJ(_ic) (&(_ic)->ic_txlock.mtx)
|
|
#define IEEE80211_TX_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_TX_LOCK_OBJ(_ic))
|
|
#define IEEE80211_TX_LOCK(_ic) mtx_lock(IEEE80211_TX_LOCK_OBJ(_ic))
|
|
#define IEEE80211_TX_UNLOCK(_ic) mtx_unlock(IEEE80211_TX_LOCK_OBJ(_ic))
|
|
#define IEEE80211_TX_LOCK_ASSERT(_ic) \
|
|
mtx_assert(IEEE80211_TX_LOCK_OBJ(_ic), MA_OWNED)
|
|
#define IEEE80211_TX_UNLOCK_ASSERT(_ic) \
|
|
mtx_assert(IEEE80211_TX_LOCK_OBJ(_ic), MA_NOTOWNED)
|
|
|
|
/*
|
|
* Stageq / ni_tx_superg lock
|
|
*/
|
|
typedef struct {
|
|
char name[16]; /* e.g. "ath0_ff_lock" */
|
|
struct mtx mtx;
|
|
} ieee80211_ff_lock_t;
|
|
#define IEEE80211_FF_LOCK_INIT(_ic, _name) do { \
|
|
ieee80211_ff_lock_t *fl = &(_ic)->ic_fflock; \
|
|
snprintf(fl->name, sizeof(fl->name), "%s_ff_lock", _name); \
|
|
mtx_init(&fl->mtx, fl->name, NULL, MTX_DEF); \
|
|
} while (0)
|
|
#define IEEE80211_FF_LOCK_OBJ(_ic) (&(_ic)->ic_fflock.mtx)
|
|
#define IEEE80211_FF_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_FF_LOCK_OBJ(_ic))
|
|
#define IEEE80211_FF_LOCK(_ic) mtx_lock(IEEE80211_FF_LOCK_OBJ(_ic))
|
|
#define IEEE80211_FF_UNLOCK(_ic) mtx_unlock(IEEE80211_FF_LOCK_OBJ(_ic))
|
|
#define IEEE80211_FF_LOCK_ASSERT(_ic) \
|
|
mtx_assert(IEEE80211_FF_LOCK_OBJ(_ic), MA_OWNED)
|
|
|
|
/*
|
|
* Node locking definitions.
|
|
*/
|
|
typedef struct {
|
|
char name[16]; /* e.g. "ath0_node_lock" */
|
|
struct mtx mtx;
|
|
} ieee80211_node_lock_t;
|
|
#define IEEE80211_NODE_LOCK_INIT(_nt, _name) do { \
|
|
ieee80211_node_lock_t *nl = &(_nt)->nt_nodelock; \
|
|
snprintf(nl->name, sizeof(nl->name), "%s_node_lock", _name); \
|
|
mtx_init(&nl->mtx, nl->name, NULL, MTX_DEF | MTX_RECURSE); \
|
|
} while (0)
|
|
#define IEEE80211_NODE_LOCK_OBJ(_nt) (&(_nt)->nt_nodelock.mtx)
|
|
#define IEEE80211_NODE_LOCK_DESTROY(_nt) \
|
|
mtx_destroy(IEEE80211_NODE_LOCK_OBJ(_nt))
|
|
#define IEEE80211_NODE_LOCK(_nt) \
|
|
mtx_lock(IEEE80211_NODE_LOCK_OBJ(_nt))
|
|
#define IEEE80211_NODE_IS_LOCKED(_nt) \
|
|
mtx_owned(IEEE80211_NODE_LOCK_OBJ(_nt))
|
|
#define IEEE80211_NODE_UNLOCK(_nt) \
|
|
mtx_unlock(IEEE80211_NODE_LOCK_OBJ(_nt))
|
|
#define IEEE80211_NODE_LOCK_ASSERT(_nt) \
|
|
mtx_assert(IEEE80211_NODE_LOCK_OBJ(_nt), MA_OWNED)
|
|
|
|
/*
|
|
* Power-save queue definitions.
|
|
*/
|
|
typedef struct mtx ieee80211_psq_lock_t;
|
|
#define IEEE80211_PSQ_INIT(_psq, _name) \
|
|
mtx_init(&(_psq)->psq_lock, _name, "802.11 ps q", MTX_DEF)
|
|
#define IEEE80211_PSQ_DESTROY(_psq) mtx_destroy(&(_psq)->psq_lock)
|
|
#define IEEE80211_PSQ_LOCK(_psq) mtx_lock(&(_psq)->psq_lock)
|
|
#define IEEE80211_PSQ_UNLOCK(_psq) mtx_unlock(&(_psq)->psq_lock)
|
|
|
|
#ifndef IF_PREPEND_LIST
|
|
#define _IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \
|
|
(mtail)->m_nextpkt = (ifq)->ifq_head; \
|
|
if ((ifq)->ifq_tail == NULL) \
|
|
(ifq)->ifq_tail = (mtail); \
|
|
(ifq)->ifq_head = (mhead); \
|
|
(ifq)->ifq_len += (mcount); \
|
|
} while (0)
|
|
#define IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \
|
|
IF_LOCK(ifq); \
|
|
_IF_PREPEND_LIST(ifq, mhead, mtail, mcount); \
|
|
IF_UNLOCK(ifq); \
|
|
} while (0)
|
|
#endif /* IF_PREPEND_LIST */
|
|
|
|
/*
|
|
* Age queue definitions.
|
|
*/
|
|
typedef struct mtx ieee80211_ageq_lock_t;
|
|
#define IEEE80211_AGEQ_INIT(_aq, _name) \
|
|
mtx_init(&(_aq)->aq_lock, _name, "802.11 age q", MTX_DEF)
|
|
#define IEEE80211_AGEQ_DESTROY(_aq) mtx_destroy(&(_aq)->aq_lock)
|
|
#define IEEE80211_AGEQ_LOCK(_aq) mtx_lock(&(_aq)->aq_lock)
|
|
#define IEEE80211_AGEQ_UNLOCK(_aq) mtx_unlock(&(_aq)->aq_lock)
|
|
|
|
/*
|
|
* 802.1x MAC ACL database locking definitions.
|
|
*/
|
|
typedef struct mtx acl_lock_t;
|
|
#define ACL_LOCK_INIT(_as, _name) \
|
|
mtx_init(&(_as)->as_lock, _name, "802.11 ACL", MTX_DEF)
|
|
#define ACL_LOCK_DESTROY(_as) mtx_destroy(&(_as)->as_lock)
|
|
#define ACL_LOCK(_as) mtx_lock(&(_as)->as_lock)
|
|
#define ACL_UNLOCK(_as) mtx_unlock(&(_as)->as_lock)
|
|
#define ACL_LOCK_ASSERT(_as) \
|
|
mtx_assert((&(_as)->as_lock), MA_OWNED)
|
|
|
|
/*
|
|
* Scan table definitions.
|
|
*/
|
|
typedef struct mtx ieee80211_scan_table_lock_t;
|
|
#define IEEE80211_SCAN_TABLE_LOCK_INIT(_st, _name) \
|
|
mtx_init(&(_st)->st_lock, _name, "802.11 scan table", MTX_DEF)
|
|
#define IEEE80211_SCAN_TABLE_LOCK_DESTROY(_st) mtx_destroy(&(_st)->st_lock)
|
|
#define IEEE80211_SCAN_TABLE_LOCK(_st) mtx_lock(&(_st)->st_lock)
|
|
#define IEEE80211_SCAN_TABLE_UNLOCK(_st) mtx_unlock(&(_st)->st_lock)
|
|
|
|
typedef struct mtx ieee80211_scan_iter_lock_t;
|
|
#define IEEE80211_SCAN_ITER_LOCK_INIT(_st, _name) \
|
|
mtx_init(&(_st)->st_scanlock, _name, "802.11 scangen", MTX_DEF)
|
|
#define IEEE80211_SCAN_ITER_LOCK_DESTROY(_st) mtx_destroy(&(_st)->st_scanlock)
|
|
#define IEEE80211_SCAN_ITER_LOCK(_st) mtx_lock(&(_st)->st_scanlock)
|
|
#define IEEE80211_SCAN_ITER_UNLOCK(_st) mtx_unlock(&(_st)->st_scanlock)
|
|
|
|
/*
|
|
* Mesh node/routing definitions.
|
|
*/
|
|
typedef struct mtx ieee80211_rte_lock_t;
|
|
#define MESH_RT_ENTRY_LOCK_INIT(_rt, _name) \
|
|
mtx_init(&(rt)->rt_lock, _name, "802.11s route entry", MTX_DEF)
|
|
#define MESH_RT_ENTRY_LOCK_DESTROY(_rt) \
|
|
mtx_destroy(&(_rt)->rt_lock)
|
|
#define MESH_RT_ENTRY_LOCK(rt) mtx_lock(&(rt)->rt_lock)
|
|
#define MESH_RT_ENTRY_LOCK_ASSERT(rt) mtx_assert(&(rt)->rt_lock, MA_OWNED)
|
|
#define MESH_RT_ENTRY_UNLOCK(rt) mtx_unlock(&(rt)->rt_lock)
|
|
|
|
typedef struct mtx ieee80211_rt_lock_t;
|
|
#define MESH_RT_LOCK(ms) mtx_lock(&(ms)->ms_rt_lock)
|
|
#define MESH_RT_LOCK_ASSERT(ms) mtx_assert(&(ms)->ms_rt_lock, MA_OWNED)
|
|
#define MESH_RT_UNLOCK(ms) mtx_unlock(&(ms)->ms_rt_lock)
|
|
#define MESH_RT_LOCK_INIT(ms, name) \
|
|
mtx_init(&(ms)->ms_rt_lock, name, "802.11s routing table", MTX_DEF)
|
|
#define MESH_RT_LOCK_DESTROY(ms) \
|
|
mtx_destroy(&(ms)->ms_rt_lock)
|
|
|
|
/*
|
|
* Node reference counting definitions.
|
|
*
|
|
* ieee80211_node_initref initialize the reference count to 1
|
|
* ieee80211_node_incref add a reference
|
|
* ieee80211_node_decref remove a reference
|
|
* ieee80211_node_dectestref remove a reference and return 1 if this
|
|
* is the last reference, otherwise 0
|
|
* ieee80211_node_refcnt reference count for printing (only)
|
|
*/
|
|
#include <machine/atomic.h>
|
|
|
|
struct ieee80211vap;
|
|
int ieee80211_com_vincref(struct ieee80211vap *);
|
|
void ieee80211_com_vdecref(struct ieee80211vap *);
|
|
void ieee80211_com_vdetach(struct ieee80211vap *);
|
|
|
|
#define ieee80211_node_initref(_ni) \
|
|
do { ((_ni)->ni_refcnt = 1); } while (0)
|
|
#define ieee80211_node_incref(_ni) \
|
|
atomic_add_int(&(_ni)->ni_refcnt, 1)
|
|
#define ieee80211_node_decref(_ni) \
|
|
atomic_subtract_int(&(_ni)->ni_refcnt, 1)
|
|
struct ieee80211_node;
|
|
int ieee80211_node_dectestref(struct ieee80211_node *ni);
|
|
#define ieee80211_node_refcnt(_ni) (_ni)->ni_refcnt
|
|
|
|
struct ifqueue;
|
|
void ieee80211_drain_ifq(struct ifqueue *);
|
|
void ieee80211_flush_ifq(struct ifqueue *, struct ieee80211vap *);
|
|
|
|
void ieee80211_vap_destroy(struct ieee80211vap *);
|
|
|
|
#define IFNET_IS_UP_RUNNING(_ifp) \
|
|
(((_ifp)->if_flags & IFF_UP) && \
|
|
((_ifp)->if_drv_flags & IFF_DRV_RUNNING))
|
|
|
|
#define msecs_to_ticks(ms) MSEC_2_TICKS(ms)
|
|
#define ticks_to_msecs(t) TICKS_2_MSEC(t)
|
|
#define ticks_to_secs(t) ((t) / hz)
|
|
|
|
#define ieee80211_time_after(a,b) ((int)(b) - (int)(a) < 0)
|
|
#define ieee80211_time_before(a,b) ieee80211_time_after(b,a)
|
|
#define ieee80211_time_after_eq(a,b) ((int)(a) - (int)(b) >= 0)
|
|
#define ieee80211_time_before_eq(a,b) ieee80211_time_after_eq(b,a)
|
|
|
|
struct mbuf *ieee80211_getmgtframe(uint8_t **frm, int headroom, int pktlen);
|
|
|
|
/* tx path usage */
|
|
#define M_ENCAP M_PROTO1 /* 802.11 encap done */
|
|
#define M_EAPOL M_PROTO3 /* PAE/EAPOL frame */
|
|
#define M_PWR_SAV M_PROTO4 /* bypass PS handling */
|
|
#define M_MORE_DATA M_PROTO5 /* more data frames to follow */
|
|
#define M_FF M_PROTO6 /* fast frame / A-MSDU */
|
|
#define M_TXCB M_PROTO7 /* do tx complete callback */
|
|
#define M_AMPDU_MPDU M_PROTO8 /* ok for A-MPDU aggregation */
|
|
#define M_FRAG M_PROTO9 /* frame fragmentation */
|
|
#define M_FIRSTFRAG M_PROTO10 /* first frame fragment */
|
|
#define M_LASTFRAG M_PROTO11 /* last frame fragment */
|
|
|
|
#define M_80211_TX \
|
|
(M_ENCAP|M_EAPOL|M_PWR_SAV|M_MORE_DATA|M_FF|M_TXCB| \
|
|
M_AMPDU_MPDU|M_FRAG|M_FIRSTFRAG|M_LASTFRAG)
|
|
|
|
/* rx path usage */
|
|
#define M_AMPDU M_PROTO1 /* A-MPDU subframe */
|
|
#define M_WEP M_PROTO2 /* WEP done by hardware */
|
|
#if 0
|
|
#define M_AMPDU_MPDU M_PROTO8 /* A-MPDU re-order done */
|
|
#endif
|
|
#define M_80211_RX (M_AMPDU|M_WEP|M_AMPDU_MPDU)
|
|
|
|
#define IEEE80211_MBUF_TX_FLAG_BITS \
|
|
M_FLAG_BITS \
|
|
"\15M_ENCAP\17M_EAPOL\20M_PWR_SAV\21M_MORE_DATA\22M_FF\23M_TXCB" \
|
|
"\24M_AMPDU_MPDU\25M_FRAG\26M_FIRSTFRAG\27M_LASTFRAG"
|
|
|
|
#define IEEE80211_MBUF_RX_FLAG_BITS \
|
|
M_FLAG_BITS \
|
|
"\15M_AMPDU\16M_WEP\24M_AMPDU_MPDU"
|
|
|
|
/*
|
|
* Store WME access control bits in the vlan tag.
|
|
* This is safe since it's done after the packet is classified
|
|
* (where we use any previous tag) and because it's passed
|
|
* directly in to the driver and there's no chance someone
|
|
* else will clobber them on us.
|
|
*/
|
|
#define M_WME_SETAC(m, ac) \
|
|
((m)->m_pkthdr.ether_vtag = (ac))
|
|
#define M_WME_GETAC(m) ((m)->m_pkthdr.ether_vtag)
|
|
|
|
/*
|
|
* Mbufs on the power save queue are tagged with an age and
|
|
* timed out. We reuse the hardware checksum field in the
|
|
* mbuf packet header to store this data.
|
|
*/
|
|
#define M_AGE_SET(m,v) (m->m_pkthdr.csum_data = v)
|
|
#define M_AGE_GET(m) (m->m_pkthdr.csum_data)
|
|
#define M_AGE_SUB(m,adj) (m->m_pkthdr.csum_data -= adj)
|
|
|
|
/*
|
|
* Store the sequence number.
|
|
*/
|
|
#define M_SEQNO_SET(m, seqno) \
|
|
((m)->m_pkthdr.tso_segsz = (seqno))
|
|
#define M_SEQNO_GET(m) ((m)->m_pkthdr.tso_segsz)
|
|
|
|
#define MTAG_ABI_NET80211 1132948340 /* net80211 ABI */
|
|
|
|
struct ieee80211_cb {
|
|
void (*func)(struct ieee80211_node *, void *, int status);
|
|
void *arg;
|
|
};
|
|
#define NET80211_TAG_CALLBACK 0 /* xmit complete callback */
|
|
int ieee80211_add_callback(struct mbuf *m,
|
|
void (*func)(struct ieee80211_node *, void *, int), void *arg);
|
|
void ieee80211_process_callback(struct ieee80211_node *, struct mbuf *, int);
|
|
|
|
#define NET80211_TAG_XMIT_PARAMS 1
|
|
/* See below; this is after the bpf_params definition */
|
|
|
|
#define NET80211_TAG_RECV_PARAMS 2
|
|
|
|
#define NET80211_TAG_TOA_PARAMS 3
|
|
|
|
struct ieee80211com;
|
|
int ieee80211_parent_xmitpkt(struct ieee80211com *, struct mbuf *);
|
|
int ieee80211_vap_xmitpkt(struct ieee80211vap *, struct mbuf *);
|
|
|
|
void get_random_bytes(void *, size_t);
|
|
|
|
void ieee80211_sysctl_attach(struct ieee80211com *);
|
|
void ieee80211_sysctl_detach(struct ieee80211com *);
|
|
void ieee80211_sysctl_vattach(struct ieee80211vap *);
|
|
void ieee80211_sysctl_vdetach(struct ieee80211vap *);
|
|
|
|
SYSCTL_DECL(_net_wlan);
|
|
int ieee80211_sysctl_msecs_ticks(SYSCTL_HANDLER_ARGS);
|
|
|
|
void ieee80211_load_module(const char *);
|
|
|
|
/*
|
|
* A "policy module" is an adjunct module to net80211 that provides
|
|
* functionality that typically includes policy decisions. This
|
|
* modularity enables extensibility and vendor-supplied functionality.
|
|
*/
|
|
#define _IEEE80211_POLICY_MODULE(policy, name, version) \
|
|
typedef void (*policy##_setup)(int); \
|
|
SET_DECLARE(policy##_set, policy##_setup); \
|
|
static int \
|
|
wlan_##name##_modevent(module_t mod, int type, void *unused) \
|
|
{ \
|
|
policy##_setup * const *iter, f; \
|
|
switch (type) { \
|
|
case MOD_LOAD: \
|
|
SET_FOREACH(iter, policy##_set) { \
|
|
f = (void*) *iter; \
|
|
f(type); \
|
|
} \
|
|
return 0; \
|
|
case MOD_UNLOAD: \
|
|
case MOD_QUIESCE: \
|
|
if (nrefs) { \
|
|
printf("wlan_" #name ": still in use " \
|
|
"(%u dynamic refs)\n", nrefs); \
|
|
return EBUSY; \
|
|
} \
|
|
if (type == MOD_UNLOAD) { \
|
|
SET_FOREACH(iter, policy##_set) { \
|
|
f = (void*) *iter; \
|
|
f(type); \
|
|
} \
|
|
} \
|
|
return 0; \
|
|
} \
|
|
return EINVAL; \
|
|
} \
|
|
static moduledata_t name##_mod = { \
|
|
"wlan_" #name, \
|
|
wlan_##name##_modevent, \
|
|
0 \
|
|
}; \
|
|
DECLARE_MODULE(wlan_##name, name##_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);\
|
|
MODULE_VERSION(wlan_##name, version); \
|
|
MODULE_DEPEND(wlan_##name, wlan, 1, 1, 1)
|
|
|
|
/*
|
|
* Crypto modules implement cipher support.
|
|
*/
|
|
#define IEEE80211_CRYPTO_MODULE(name, version) \
|
|
_IEEE80211_POLICY_MODULE(crypto, name, version); \
|
|
static void \
|
|
name##_modevent(int type) \
|
|
{ \
|
|
if (type == MOD_LOAD) \
|
|
ieee80211_crypto_register(&name); \
|
|
else \
|
|
ieee80211_crypto_unregister(&name); \
|
|
} \
|
|
TEXT_SET(crypto##_set, name##_modevent)
|
|
|
|
/*
|
|
* Scanner modules provide scanning policy.
|
|
*/
|
|
#define IEEE80211_SCANNER_MODULE(name, version) \
|
|
_IEEE80211_POLICY_MODULE(scanner, name, version)
|
|
|
|
#define IEEE80211_SCANNER_ALG(name, alg, v) \
|
|
static void \
|
|
name##_modevent(int type) \
|
|
{ \
|
|
if (type == MOD_LOAD) \
|
|
ieee80211_scanner_register(alg, &v); \
|
|
else \
|
|
ieee80211_scanner_unregister(alg, &v); \
|
|
} \
|
|
TEXT_SET(scanner_set, name##_modevent); \
|
|
|
|
/*
|
|
* ACL modules implement acl policy.
|
|
*/
|
|
#define IEEE80211_ACL_MODULE(name, alg, version) \
|
|
_IEEE80211_POLICY_MODULE(acl, name, version); \
|
|
static void \
|
|
alg##_modevent(int type) \
|
|
{ \
|
|
if (type == MOD_LOAD) \
|
|
ieee80211_aclator_register(&alg); \
|
|
else \
|
|
ieee80211_aclator_unregister(&alg); \
|
|
} \
|
|
TEXT_SET(acl_set, alg##_modevent); \
|
|
|
|
/*
|
|
* Authenticator modules handle 802.1x/WPA authentication.
|
|
*/
|
|
#define IEEE80211_AUTH_MODULE(name, version) \
|
|
_IEEE80211_POLICY_MODULE(auth, name, version)
|
|
|
|
#define IEEE80211_AUTH_ALG(name, alg, v) \
|
|
static void \
|
|
name##_modevent(int type) \
|
|
{ \
|
|
if (type == MOD_LOAD) \
|
|
ieee80211_authenticator_register(alg, &v); \
|
|
else \
|
|
ieee80211_authenticator_unregister(alg); \
|
|
} \
|
|
TEXT_SET(auth_set, name##_modevent)
|
|
|
|
/*
|
|
* Rate control modules provide tx rate control support.
|
|
*/
|
|
#define IEEE80211_RATECTL_MODULE(alg, version) \
|
|
_IEEE80211_POLICY_MODULE(ratectl, alg, version); \
|
|
|
|
#define IEEE80211_RATECTL_ALG(name, alg, v) \
|
|
static void \
|
|
alg##_modevent(int type) \
|
|
{ \
|
|
if (type == MOD_LOAD) \
|
|
ieee80211_ratectl_register(alg, &v); \
|
|
else \
|
|
ieee80211_ratectl_unregister(alg); \
|
|
} \
|
|
TEXT_SET(ratectl##_set, alg##_modevent)
|
|
|
|
struct ieee80211req;
|
|
typedef int ieee80211_ioctl_getfunc(struct ieee80211vap *,
|
|
struct ieee80211req *);
|
|
SET_DECLARE(ieee80211_ioctl_getset, ieee80211_ioctl_getfunc);
|
|
#define IEEE80211_IOCTL_GET(_name, _get) TEXT_SET(ieee80211_ioctl_getset, _get)
|
|
|
|
typedef int ieee80211_ioctl_setfunc(struct ieee80211vap *,
|
|
struct ieee80211req *);
|
|
SET_DECLARE(ieee80211_ioctl_setset, ieee80211_ioctl_setfunc);
|
|
#define IEEE80211_IOCTL_SET(_name, _set) TEXT_SET(ieee80211_ioctl_setset, _set)
|
|
#endif /* _KERNEL */
|
|
|
|
/* XXX this stuff belongs elsewhere */
|
|
/*
|
|
* Message formats for messages from the net80211 layer to user
|
|
* applications via the routing socket. These messages are appended
|
|
* to an if_announcemsghdr structure.
|
|
*/
|
|
struct ieee80211_join_event {
|
|
uint8_t iev_addr[6];
|
|
};
|
|
|
|
struct ieee80211_leave_event {
|
|
uint8_t iev_addr[6];
|
|
};
|
|
|
|
struct ieee80211_replay_event {
|
|
uint8_t iev_src[6]; /* src MAC */
|
|
uint8_t iev_dst[6]; /* dst MAC */
|
|
uint8_t iev_cipher; /* cipher type */
|
|
uint8_t iev_keyix; /* key id/index */
|
|
uint64_t iev_keyrsc; /* RSC from key */
|
|
uint64_t iev_rsc; /* RSC from frame */
|
|
};
|
|
|
|
struct ieee80211_michael_event {
|
|
uint8_t iev_src[6]; /* src MAC */
|
|
uint8_t iev_dst[6]; /* dst MAC */
|
|
uint8_t iev_cipher; /* cipher type */
|
|
uint8_t iev_keyix; /* key id/index */
|
|
};
|
|
|
|
struct ieee80211_wds_event {
|
|
uint8_t iev_addr[6];
|
|
};
|
|
|
|
struct ieee80211_csa_event {
|
|
uint32_t iev_flags; /* channel flags */
|
|
uint16_t iev_freq; /* setting in Mhz */
|
|
uint8_t iev_ieee; /* IEEE channel number */
|
|
uint8_t iev_mode; /* CSA mode */
|
|
uint8_t iev_count; /* CSA count */
|
|
};
|
|
|
|
struct ieee80211_cac_event {
|
|
uint32_t iev_flags; /* channel flags */
|
|
uint16_t iev_freq; /* setting in Mhz */
|
|
uint8_t iev_ieee; /* IEEE channel number */
|
|
/* XXX timestamp? */
|
|
uint8_t iev_type; /* IEEE80211_NOTIFY_CAC_* */
|
|
};
|
|
|
|
struct ieee80211_radar_event {
|
|
uint32_t iev_flags; /* channel flags */
|
|
uint16_t iev_freq; /* setting in Mhz */
|
|
uint8_t iev_ieee; /* IEEE channel number */
|
|
/* XXX timestamp? */
|
|
};
|
|
|
|
struct ieee80211_auth_event {
|
|
uint8_t iev_addr[6];
|
|
};
|
|
|
|
struct ieee80211_deauth_event {
|
|
uint8_t iev_addr[6];
|
|
};
|
|
|
|
struct ieee80211_country_event {
|
|
uint8_t iev_addr[6];
|
|
uint8_t iev_cc[2]; /* ISO country code */
|
|
};
|
|
|
|
struct ieee80211_radio_event {
|
|
uint8_t iev_state; /* 1 on, 0 off */
|
|
};
|
|
|
|
#define RTM_IEEE80211_ASSOC 100 /* station associate (bss mode) */
|
|
#define RTM_IEEE80211_REASSOC 101 /* station re-associate (bss mode) */
|
|
#define RTM_IEEE80211_DISASSOC 102 /* station disassociate (bss mode) */
|
|
#define RTM_IEEE80211_JOIN 103 /* station join (ap mode) */
|
|
#define RTM_IEEE80211_LEAVE 104 /* station leave (ap mode) */
|
|
#define RTM_IEEE80211_SCAN 105 /* scan complete, results available */
|
|
#define RTM_IEEE80211_REPLAY 106 /* sequence counter replay detected */
|
|
#define RTM_IEEE80211_MICHAEL 107 /* Michael MIC failure detected */
|
|
#define RTM_IEEE80211_REJOIN 108 /* station re-associate (ap mode) */
|
|
#define RTM_IEEE80211_WDS 109 /* WDS discovery (ap mode) */
|
|
#define RTM_IEEE80211_CSA 110 /* Channel Switch Announcement event */
|
|
#define RTM_IEEE80211_RADAR 111 /* radar event */
|
|
#define RTM_IEEE80211_CAC 112 /* Channel Availability Check event */
|
|
#define RTM_IEEE80211_DEAUTH 113 /* station deauthenticate */
|
|
#define RTM_IEEE80211_AUTH 114 /* station authenticate (ap mode) */
|
|
#define RTM_IEEE80211_COUNTRY 115 /* discovered country code (sta mode) */
|
|
#define RTM_IEEE80211_RADIO 116 /* RF kill switch state change */
|
|
|
|
/*
|
|
* Structure prepended to raw packets sent through the bpf
|
|
* interface when set to DLT_IEEE802_11_RADIO. This allows
|
|
* user applications to specify pretty much everything in
|
|
* an Atheros tx descriptor. XXX need to generalize.
|
|
*
|
|
* XXX cannot be more than 14 bytes as it is copied to a sockaddr's
|
|
* XXX sa_data area.
|
|
*/
|
|
struct ieee80211_bpf_params {
|
|
uint8_t ibp_vers; /* version */
|
|
#define IEEE80211_BPF_VERSION 0
|
|
uint8_t ibp_len; /* header length in bytes */
|
|
uint8_t ibp_flags;
|
|
#define IEEE80211_BPF_SHORTPRE 0x01 /* tx with short preamble */
|
|
#define IEEE80211_BPF_NOACK 0x02 /* tx with no ack */
|
|
#define IEEE80211_BPF_CRYPTO 0x04 /* tx with h/w encryption */
|
|
#define IEEE80211_BPF_FCS 0x10 /* frame incldues FCS */
|
|
#define IEEE80211_BPF_DATAPAD 0x20 /* frame includes data padding */
|
|
#define IEEE80211_BPF_RTS 0x40 /* tx with RTS/CTS */
|
|
#define IEEE80211_BPF_CTS 0x80 /* tx with CTS only */
|
|
uint8_t ibp_pri; /* WME/WMM AC+tx antenna */
|
|
uint8_t ibp_try0; /* series 1 try count */
|
|
uint8_t ibp_rate0; /* series 1 IEEE tx rate */
|
|
uint8_t ibp_power; /* tx power (device units) */
|
|
uint8_t ibp_ctsrate; /* IEEE tx rate for CTS */
|
|
uint8_t ibp_try1; /* series 2 try count */
|
|
uint8_t ibp_rate1; /* series 2 IEEE tx rate */
|
|
uint8_t ibp_try2; /* series 3 try count */
|
|
uint8_t ibp_rate2; /* series 3 IEEE tx rate */
|
|
uint8_t ibp_try3; /* series 4 try count */
|
|
uint8_t ibp_rate3; /* series 4 IEEE tx rate */
|
|
};
|
|
|
|
#ifdef _KERNEL
|
|
struct ieee80211_tx_params {
|
|
struct ieee80211_bpf_params params;
|
|
};
|
|
int ieee80211_add_xmit_params(struct mbuf *m,
|
|
const struct ieee80211_bpf_params *);
|
|
int ieee80211_get_xmit_params(struct mbuf *m,
|
|
struct ieee80211_bpf_params *);
|
|
|
|
struct ieee80211_rx_params;
|
|
struct ieee80211_rx_stats;
|
|
|
|
int ieee80211_add_rx_params(struct mbuf *m,
|
|
const struct ieee80211_rx_stats *rxs);
|
|
int ieee80211_get_rx_params(struct mbuf *m,
|
|
struct ieee80211_rx_stats *rxs);
|
|
const struct ieee80211_rx_stats * ieee80211_get_rx_params_ptr(struct mbuf *m);
|
|
|
|
struct ieee80211_toa_params {
|
|
int request_id;
|
|
};
|
|
int ieee80211_add_toa_params(struct mbuf *m,
|
|
const struct ieee80211_toa_params *p);
|
|
int ieee80211_get_toa_params(struct mbuf *m,
|
|
struct ieee80211_toa_params *p);
|
|
|
|
#define IEEE80211_F_SURVEY_TIME 0x00000001
|
|
#define IEEE80211_F_SURVEY_TIME_BUSY 0x00000002
|
|
#define IEEE80211_F_SURVEY_NOISE_DBM 0x00000004
|
|
#define IEEE80211_F_SURVEY_TSC 0x00000008
|
|
struct ieee80211_channel_survey {
|
|
uint32_t s_flags;
|
|
uint32_t s_time;
|
|
uint32_t s_time_busy;
|
|
int32_t s_noise;
|
|
uint64_t s_tsc;
|
|
};
|
|
|
|
#endif /* _KERNEL */
|
|
|
|
/*
|
|
* Malloc API. Other BSD operating systems have slightly
|
|
* different malloc/free namings (eg DragonflyBSD.)
|
|
*/
|
|
#define IEEE80211_MALLOC malloc
|
|
#define IEEE80211_FREE free
|
|
|
|
/* XXX TODO: get rid of WAITOK, fix all the users of it? */
|
|
#define IEEE80211_M_NOWAIT M_NOWAIT
|
|
#define IEEE80211_M_WAITOK M_WAITOK
|
|
#define IEEE80211_M_ZERO M_ZERO
|
|
|
|
/* XXX TODO: the type fields */
|
|
|
|
#endif /* _NET80211_IEEE80211_FREEBSD_H_ */
|