freebsd-dev/sys/geom/geom_io.c
Kenneth D. Merry 9a6844d55f Add support for managing Shingled Magnetic Recording (SMR) drives.
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.

This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).

This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)

Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.

Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set.  You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.

Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity.  In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged.  For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.

Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation.  I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated.  These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers.  Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.

Thanks to Seagate for supplying the test hardware and answering questions.

sbin/camcontrol/Makefile:
	Add epc.c and zone.c.

sbin/camcontrol/camcontrol.8:
	Document the zone and epc subcommands.

sbin/camcontrol/camcontrol.c:
	Add the zone and epc subcommands.

	Add auxiliary register support to build_ata_cmd().  Make sure to
	set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
	flags as appropriate for ATA commands.

	Add a new get_ata_status() function to parse ATA result from SCSI
	sense descriptors (for ATA passthrough over SCSI) and ATA I/O
	requests.

sbin/camcontrol/camcontrol.h:
	Update the build_ata_cmd() prototype

	Add get_ata_status(), zone(), and epc().

sbin/camcontrol/epc.c:
	Support for ATA Extended Power Conditions features.  This includes
	support for all features documented in the ACS-4 Revision 12
	specification from t13.org (dated February 18, 2016).

	The EPC feature set allows putting a drive into a power power mode
	immediately, or setting timeouts so that the drive will
	automatically enter progressively lower power states after various
	idle times.

sbin/camcontrol/fwdownload.c:
	Update the firmware download code for the new build_ata_cmd()
	arguments.

sbin/camcontrol/zone.c:
	Implement support for Shingled Magnetic Recording (SMR) drives
	via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
	Command Set (ZAC).

	These specs were developed in concert, and are functionally
	identical.  The primary differences are due to SCSI and ATA
	differences.  (SCSI is big endian, ATA is little endian, for
	example.)

	This includes support for all commands defined in the ZBC and
	ZAC specs.

sys/cam/ata/ata_all.c:
	Decode a number of additional ATA command names in ata_op_string().

	Add a new CCB building function, ata_read_log().

	Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
	functions.  These support both DMA and NCQ encapsulation.

sys/cam/ata/ata_all.h:
	Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
	ata_zac_mgmt_in().

sys/cam/ata/ata_da.c:
	Revamp the ada(4) driver to support zoned devices.

	Add four new probe states to gather information needed for zone
	support.

	Add a new adasetflags() function to avoid duplication of large
	blocks of flag setting between the async handler and register
	functions.

	Add new sysctl variables that describe zone support and paramters.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

sys/cam/scsi/scsi_all.c:
	Add command descriptions for the ZBC IN/OUT commands.

	Add descriptions for ZBC Host Managed devices.

	Add a new function, scsi_ata_pass() to do ATA passthrough over
	SCSI.  This will eventually replace scsi_ata_pass_16() -- it
	can create the 12, 16, and 32-byte variants of the ATA
	PASS-THROUGH command, and supports setting all of the
	registers defined as of SAT-4, Revision 5 (March 11, 2016).

	Change scsi_ata_identify() to use scsi_ata_pass() instead of
	scsi_ata_pass_16().

	Add a new scsi_ata_read_log() function to facilitate reading
	ATA logs via SCSI.

sys/cam/scsi/scsi_all.h:
	Add the new ATA PASS-THROUGH(32) command CDB.  Add extended and
	variable CDB opcodes.

	Add Zoned Block Device Characteristics VPD page.

	Add ATA Return SCSI sense descriptor.

	Add prototypes for scsi_ata_read_log() and scsi_ata_pass().

sys/cam/scsi/scsi_da.c:
	Revamp the da(4) driver to support zoned devices.

	Add five new probe states, four of which are needed for ATA
	devices.

	Add five new sysctl variables that describe zone support and
	parameters.

	The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
	devices when they are attached via a SCSI to ATA Translation (SAT)
	layer.  Since ZBC -> ZAC translation is a new feature in the T10
	SAT-4 spec, most SATA drives will be supported via ATA commands
	sent via the SCSI ATA PASS-THROUGH command.  The da(4) driver will
	prefer the ZBC interface, if it is available, for performance
	reasons, but will use the ATA PASS-THROUGH interface to the ZAC
	command set if the SAT layer doesn't support translation yet.
	As I mentioned above, ZBC command support is untested.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

	Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.

	Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
	building functions.  Note that these have return values, unlike
	almost all other CCB building functions in CAM.  The reason is
	that they can fail, depending upon the particular combination
	of input parameters.  The primary failure case is if the user
	wants NCQ, but fails to specify additional CDB storage.  NCQ
	requires using the 32-byte version of the SCSI ATA PASS-THROUGH
	command, and the current CAM CDB size is 16 bytes.

sys/cam/scsi/scsi_da.h:
	Add ZBC IN and ZBC OUT CDBs and opcodes.

	Add SCSI Report Zones data structures.

	Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
	scsi_ata_zac_mgmt_in() prototypes.

sys/dev/ahci/ahci.c:
	Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.

	ahci_setup_fis() previously set the top bits of the sector count
	register in the FIS to 0 for FPDMA commands.  This is okay for
	read and write, because the PRIO field is in the only thing in
	those bits, and we don't implement that further up the stack.

	But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
	byte, so it needs to be transmitted to the drive.

	In ahci_setup_fis(), always set the the top 8 bits of the
	sector count register.  We need it in both the standard
	and NCQ / FPDMA cases.

sys/geom/eli/g_eli.c:
	Pass BIO_ZONE commands through the GELI class.

sys/geom/geom.h:
	Add g_io_zonecmd() prototype.

sys/geom/geom_dev.c:
	Add new DIOCZONECMD ioctl, which allows sending zone commands to
	disks.

sys/geom/geom_disk.c:
	Add support for BIO_ZONE commands.

sys/geom/geom_disk.h:
	Add a new flag, DISKFLAG_CANZONE, that indicates that a given
	GEOM disk client can handle BIO_ZONE commands.

sys/geom/geom_io.c:
	Add a new function, g_io_zonecmd(), that handles execution of
	BIO_ZONE commands.

	Add permissions check for BIO_ZONE commands.

	Add command decoding for BIO_ZONE commands.

sys/geom/geom_subr.c:
	Add DDB command decoding for BIO_ZONE commands.

sys/kern/subr_devstat.c:
	Record statistics for REPORT ZONES commands.  Note that the
	number of bytes transferred for REPORT ZONES won't quite match
	what is received from the harware.  This is because we're
	necessarily counting bytes coming from the da(4) / ada(4) drivers,
	which are using the disk_zone.h interface to communicate up
	the stack.  The structure sizes it uses are slightly different
	than the SCSI and ATA structure sizes.

sys/sys/ata.h:
	Add many bit and structure definitions for ZAC, NCQ, and EPC
	command support.

sys/sys/bio.h:
	Convert the bio_cmd field to a straight enumeration.  This will
	yield more space for additional commands in the future.  After
	change r297955 and other related changes, this is now possible.
	Converting to an enumeration will also prevent use as a bitmask
	in the future.

sys/sys/disk.h:
	Define the DIOCZONECMD ioctl.

sys/sys/disk_zone.h:
	Add a new API for managing zoned disks.  This is very close to
	the SCSI ZBC and ATA ZAC standards, but uses integers in native
	byte order instead of big endian (SCSI) or little endian (ATA)
	byte arrays.

	This is intended to offer to the complete feature set of the ZBC
	and ZAC disk management without requiring the application developer
	to include SCSI or ATA headers.  We also use one set of headers
	for ioctl consumers and kernel bio-level consumers.

sys/sys/param.h:
	Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
	of SMR support.

usr.sbin/Makefile:
	Add the zonectl utility.

usr.sbin/diskinfo/diskinfo.c
	Add disk zoning capability to the 'diskinfo -v' output.

usr.sbin/zonectl/Makefile:
	Add zonectl makefile.

usr.sbin/zonectl/zonectl.8
	zonectl(8) man page.

usr.sbin/zonectl/zonectl.c
	The zonectl(8) utility.  This allows managing SCSI or ATA zoned
	disks via the disk_zone.h API.  You can report zones, reset write
	pointers, get parameters, etc.

Sponsored by:	Spectra Logic
Differential Revision:	https://reviews.freebsd.org/D6147
Reviewed by:	wblock (documentation)
2016-05-19 14:08:36 +00:00

1076 lines
28 KiB
C

/*-
* Copyright (c) 2002 Poul-Henning Kamp
* Copyright (c) 2002 Networks Associates Technology, Inc.
* Copyright (c) 2013 The FreeBSD Foundation
* All rights reserved.
*
* This software was developed for the FreeBSD Project by Poul-Henning Kamp
* and NAI Labs, the Security Research Division of Network Associates, Inc.
* under DARPA/SPAWAR contract N66001-01-C-8035 ("CBOSS"), as part of the
* DARPA CHATS research program.
*
* Portions of this software were developed by Konstantin Belousov
* under sponsorship from the FreeBSD Foundation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the authors may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/bio.h>
#include <sys/ktr.h>
#include <sys/proc.h>
#include <sys/stack.h>
#include <sys/sysctl.h>
#include <sys/vmem.h>
#include <sys/errno.h>
#include <geom/geom.h>
#include <geom/geom_int.h>
#include <sys/devicestat.h>
#include <vm/uma.h>
#include <vm/vm.h>
#include <vm/vm_param.h>
#include <vm/vm_kern.h>
#include <vm/vm_page.h>
#include <vm/vm_object.h>
#include <vm/vm_extern.h>
#include <vm/vm_map.h>
static int g_io_transient_map_bio(struct bio *bp);
static struct g_bioq g_bio_run_down;
static struct g_bioq g_bio_run_up;
static struct g_bioq g_bio_run_task;
/*
* Pace is a hint that we've had some trouble recently allocating
* bios, so we should back off trying to send I/O down the stack
* a bit to let the problem resolve. When pacing, we also turn
* off direct dispatch to also reduce memory pressure from I/Os
* there, at the expxense of some added latency while the memory
* pressures exist. See g_io_schedule_down() for more details
* and limitations.
*/
static volatile u_int pace;
static uma_zone_t biozone;
/*
* The head of the list of classifiers used in g_io_request.
* Use g_register_classifier() and g_unregister_classifier()
* to add/remove entries to the list.
* Classifiers are invoked in registration order.
*/
static TAILQ_HEAD(g_classifier_tailq, g_classifier_hook)
g_classifier_tailq = TAILQ_HEAD_INITIALIZER(g_classifier_tailq);
#include <machine/atomic.h>
static void
g_bioq_lock(struct g_bioq *bq)
{
mtx_lock(&bq->bio_queue_lock);
}
static void
g_bioq_unlock(struct g_bioq *bq)
{
mtx_unlock(&bq->bio_queue_lock);
}
#if 0
static void
g_bioq_destroy(struct g_bioq *bq)
{
mtx_destroy(&bq->bio_queue_lock);
}
#endif
static void
g_bioq_init(struct g_bioq *bq)
{
TAILQ_INIT(&bq->bio_queue);
mtx_init(&bq->bio_queue_lock, "bio queue", NULL, MTX_DEF);
}
static struct bio *
g_bioq_first(struct g_bioq *bq)
{
struct bio *bp;
bp = TAILQ_FIRST(&bq->bio_queue);
if (bp != NULL) {
KASSERT((bp->bio_flags & BIO_ONQUEUE),
("Bio not on queue bp=%p target %p", bp, bq));
bp->bio_flags &= ~BIO_ONQUEUE;
TAILQ_REMOVE(&bq->bio_queue, bp, bio_queue);
bq->bio_queue_length--;
}
return (bp);
}
struct bio *
g_new_bio(void)
{
struct bio *bp;
bp = uma_zalloc(biozone, M_NOWAIT | M_ZERO);
#ifdef KTR
if ((KTR_COMPILE & KTR_GEOM) && (ktr_mask & KTR_GEOM)) {
struct stack st;
CTR1(KTR_GEOM, "g_new_bio(): %p", bp);
stack_save(&st);
CTRSTACK(KTR_GEOM, &st, 3, 0);
}
#endif
return (bp);
}
struct bio *
g_alloc_bio(void)
{
struct bio *bp;
bp = uma_zalloc(biozone, M_WAITOK | M_ZERO);
#ifdef KTR
if ((KTR_COMPILE & KTR_GEOM) && (ktr_mask & KTR_GEOM)) {
struct stack st;
CTR1(KTR_GEOM, "g_alloc_bio(): %p", bp);
stack_save(&st);
CTRSTACK(KTR_GEOM, &st, 3, 0);
}
#endif
return (bp);
}
void
g_destroy_bio(struct bio *bp)
{
#ifdef KTR
if ((KTR_COMPILE & KTR_GEOM) && (ktr_mask & KTR_GEOM)) {
struct stack st;
CTR1(KTR_GEOM, "g_destroy_bio(): %p", bp);
stack_save(&st);
CTRSTACK(KTR_GEOM, &st, 3, 0);
}
#endif
uma_zfree(biozone, bp);
}
struct bio *
g_clone_bio(struct bio *bp)
{
struct bio *bp2;
bp2 = uma_zalloc(biozone, M_NOWAIT | M_ZERO);
if (bp2 != NULL) {
bp2->bio_parent = bp;
bp2->bio_cmd = bp->bio_cmd;
/*
* BIO_ORDERED flag may be used by disk drivers to enforce
* ordering restrictions, so this flag needs to be cloned.
* BIO_UNMAPPED and BIO_VLIST should be inherited, to properly
* indicate which way the buffer is passed.
* Other bio flags are not suitable for cloning.
*/
bp2->bio_flags = bp->bio_flags &
(BIO_ORDERED | BIO_UNMAPPED | BIO_VLIST);
bp2->bio_length = bp->bio_length;
bp2->bio_offset = bp->bio_offset;
bp2->bio_data = bp->bio_data;
bp2->bio_ma = bp->bio_ma;
bp2->bio_ma_n = bp->bio_ma_n;
bp2->bio_ma_offset = bp->bio_ma_offset;
bp2->bio_attribute = bp->bio_attribute;
if (bp->bio_cmd == BIO_ZONE)
bcopy(&bp->bio_zone, &bp2->bio_zone,
sizeof(bp->bio_zone));
/* Inherit classification info from the parent */
bp2->bio_classifier1 = bp->bio_classifier1;
bp2->bio_classifier2 = bp->bio_classifier2;
bp->bio_children++;
}
#ifdef KTR
if ((KTR_COMPILE & KTR_GEOM) && (ktr_mask & KTR_GEOM)) {
struct stack st;
CTR2(KTR_GEOM, "g_clone_bio(%p): %p", bp, bp2);
stack_save(&st);
CTRSTACK(KTR_GEOM, &st, 3, 0);
}
#endif
return(bp2);
}
struct bio *
g_duplicate_bio(struct bio *bp)
{
struct bio *bp2;
bp2 = uma_zalloc(biozone, M_WAITOK | M_ZERO);
bp2->bio_flags = bp->bio_flags & (BIO_UNMAPPED | BIO_VLIST);
bp2->bio_parent = bp;
bp2->bio_cmd = bp->bio_cmd;
bp2->bio_length = bp->bio_length;
bp2->bio_offset = bp->bio_offset;
bp2->bio_data = bp->bio_data;
bp2->bio_ma = bp->bio_ma;
bp2->bio_ma_n = bp->bio_ma_n;
bp2->bio_ma_offset = bp->bio_ma_offset;
bp2->bio_attribute = bp->bio_attribute;
bp->bio_children++;
#ifdef KTR
if ((KTR_COMPILE & KTR_GEOM) && (ktr_mask & KTR_GEOM)) {
struct stack st;
CTR2(KTR_GEOM, "g_duplicate_bio(%p): %p", bp, bp2);
stack_save(&st);
CTRSTACK(KTR_GEOM, &st, 3, 0);
}
#endif
return(bp2);
}
void
g_reset_bio(struct bio *bp)
{
bzero(bp, sizeof(*bp));
}
void
g_io_init()
{
g_bioq_init(&g_bio_run_down);
g_bioq_init(&g_bio_run_up);
g_bioq_init(&g_bio_run_task);
biozone = uma_zcreate("g_bio", sizeof (struct bio),
NULL, NULL,
NULL, NULL,
0, 0);
}
int
g_io_getattr(const char *attr, struct g_consumer *cp, int *len, void *ptr)
{
struct bio *bp;
int error;
g_trace(G_T_BIO, "bio_getattr(%s)", attr);
bp = g_alloc_bio();
bp->bio_cmd = BIO_GETATTR;
bp->bio_done = NULL;
bp->bio_attribute = attr;
bp->bio_length = *len;
bp->bio_data = ptr;
g_io_request(bp, cp);
error = biowait(bp, "ggetattr");
*len = bp->bio_completed;
g_destroy_bio(bp);
return (error);
}
int
g_io_zonecmd(struct disk_zone_args *zone_args, struct g_consumer *cp)
{
struct bio *bp;
int error;
g_trace(G_T_BIO, "bio_zone(%d)", zone_args->zone_cmd);
bp = g_alloc_bio();
bp->bio_cmd = BIO_ZONE;
bp->bio_done = NULL;
/*
* XXX KDM need to handle report zone data.
*/
bcopy(zone_args, &bp->bio_zone, sizeof(*zone_args));
if (zone_args->zone_cmd == DISK_ZONE_REPORT_ZONES)
bp->bio_length =
zone_args->zone_params.report.entries_allocated *
sizeof(struct disk_zone_rep_entry);
else
bp->bio_length = 0;
g_io_request(bp, cp);
error = biowait(bp, "gzone");
bcopy(&bp->bio_zone, zone_args, sizeof(*zone_args));
g_destroy_bio(bp);
return (error);
}
int
g_io_flush(struct g_consumer *cp)
{
struct bio *bp;
int error;
g_trace(G_T_BIO, "bio_flush(%s)", cp->provider->name);
bp = g_alloc_bio();
bp->bio_cmd = BIO_FLUSH;
bp->bio_flags |= BIO_ORDERED;
bp->bio_done = NULL;
bp->bio_attribute = NULL;
bp->bio_offset = cp->provider->mediasize;
bp->bio_length = 0;
bp->bio_data = NULL;
g_io_request(bp, cp);
error = biowait(bp, "gflush");
g_destroy_bio(bp);
return (error);
}
static int
g_io_check(struct bio *bp)
{
struct g_consumer *cp;
struct g_provider *pp;
off_t excess;
int error;
cp = bp->bio_from;
pp = bp->bio_to;
/* Fail if access counters dont allow the operation */
switch(bp->bio_cmd) {
case BIO_READ:
case BIO_GETATTR:
if (cp->acr == 0)
return (EPERM);
break;
case BIO_WRITE:
case BIO_DELETE:
case BIO_FLUSH:
if (cp->acw == 0)
return (EPERM);
break;
case BIO_ZONE:
if ((bp->bio_zone.zone_cmd == DISK_ZONE_REPORT_ZONES) ||
(bp->bio_zone.zone_cmd == DISK_ZONE_GET_PARAMS)) {
if (cp->acr == 0)
return (EPERM);
} else if (cp->acw == 0)
return (EPERM);
break;
default:
return (EPERM);
}
/* if provider is marked for error, don't disturb. */
if (pp->error)
return (pp->error);
if (cp->flags & G_CF_ORPHAN)
return (ENXIO);
switch(bp->bio_cmd) {
case BIO_READ:
case BIO_WRITE:
case BIO_DELETE:
/* Zero sectorsize or mediasize is probably a lack of media. */
if (pp->sectorsize == 0 || pp->mediasize == 0)
return (ENXIO);
/* Reject I/O not on sector boundary */
if (bp->bio_offset % pp->sectorsize)
return (EINVAL);
/* Reject I/O not integral sector long */
if (bp->bio_length % pp->sectorsize)
return (EINVAL);
/* Reject requests before or past the end of media. */
if (bp->bio_offset < 0)
return (EIO);
if (bp->bio_offset > pp->mediasize)
return (EIO);
/* Truncate requests to the end of providers media. */
excess = bp->bio_offset + bp->bio_length;
if (excess > bp->bio_to->mediasize) {
KASSERT((bp->bio_flags & BIO_UNMAPPED) == 0 ||
round_page(bp->bio_ma_offset +
bp->bio_length) / PAGE_SIZE == bp->bio_ma_n,
("excess bio %p too short", bp));
excess -= bp->bio_to->mediasize;
bp->bio_length -= excess;
if ((bp->bio_flags & BIO_UNMAPPED) != 0) {
bp->bio_ma_n = round_page(bp->bio_ma_offset +
bp->bio_length) / PAGE_SIZE;
}
if (excess > 0)
CTR3(KTR_GEOM, "g_down truncated bio "
"%p provider %s by %d", bp,
bp->bio_to->name, excess);
}
/* Deliver zero length transfers right here. */
if (bp->bio_length == 0) {
CTR2(KTR_GEOM, "g_down terminated 0-length "
"bp %p provider %s", bp, bp->bio_to->name);
return (0);
}
if ((bp->bio_flags & BIO_UNMAPPED) != 0 &&
(bp->bio_to->flags & G_PF_ACCEPT_UNMAPPED) == 0 &&
(bp->bio_cmd == BIO_READ || bp->bio_cmd == BIO_WRITE)) {
if ((error = g_io_transient_map_bio(bp)) >= 0)
return (error);
}
break;
default:
break;
}
return (EJUSTRETURN);
}
/*
* bio classification support.
*
* g_register_classifier() and g_unregister_classifier()
* are used to add/remove a classifier from the list.
* The list is protected using the g_bio_run_down lock,
* because the classifiers are called in this path.
*
* g_io_request() passes bio's that are not already classified
* (i.e. those with bio_classifier1 == NULL) to g_run_classifiers().
* Classifiers can store their result in the two fields
* bio_classifier1 and bio_classifier2.
* A classifier that updates one of the fields should
* return a non-zero value.
* If no classifier updates the field, g_run_classifiers() sets
* bio_classifier1 = BIO_NOTCLASSIFIED to avoid further calls.
*/
int
g_register_classifier(struct g_classifier_hook *hook)
{
g_bioq_lock(&g_bio_run_down);
TAILQ_INSERT_TAIL(&g_classifier_tailq, hook, link);
g_bioq_unlock(&g_bio_run_down);
return (0);
}
void
g_unregister_classifier(struct g_classifier_hook *hook)
{
struct g_classifier_hook *entry;
g_bioq_lock(&g_bio_run_down);
TAILQ_FOREACH(entry, &g_classifier_tailq, link) {
if (entry == hook) {
TAILQ_REMOVE(&g_classifier_tailq, hook, link);
break;
}
}
g_bioq_unlock(&g_bio_run_down);
}
static void
g_run_classifiers(struct bio *bp)
{
struct g_classifier_hook *hook;
int classified = 0;
TAILQ_FOREACH(hook, &g_classifier_tailq, link)
classified |= hook->func(hook->arg, bp);
if (!classified)
bp->bio_classifier1 = BIO_NOTCLASSIFIED;
}
void
g_io_request(struct bio *bp, struct g_consumer *cp)
{
struct g_provider *pp;
struct mtx *mtxp;
int direct, error, first;
uint8_t cmd;
KASSERT(cp != NULL, ("NULL cp in g_io_request"));
KASSERT(bp != NULL, ("NULL bp in g_io_request"));
pp = cp->provider;
KASSERT(pp != NULL, ("consumer not attached in g_io_request"));
#ifdef DIAGNOSTIC
KASSERT(bp->bio_driver1 == NULL,
("bio_driver1 used by the consumer (geom %s)", cp->geom->name));
KASSERT(bp->bio_driver2 == NULL,
("bio_driver2 used by the consumer (geom %s)", cp->geom->name));
KASSERT(bp->bio_pflags == 0,
("bio_pflags used by the consumer (geom %s)", cp->geom->name));
/*
* Remember consumer's private fields, so we can detect if they were
* modified by the provider.
*/
bp->_bio_caller1 = bp->bio_caller1;
bp->_bio_caller2 = bp->bio_caller2;
bp->_bio_cflags = bp->bio_cflags;
#endif
cmd = bp->bio_cmd;
if (cmd == BIO_READ || cmd == BIO_WRITE || cmd == BIO_GETATTR) {
KASSERT(bp->bio_data != NULL,
("NULL bp->data in g_io_request(cmd=%hu)", bp->bio_cmd));
}
if (cmd == BIO_DELETE || cmd == BIO_FLUSH) {
KASSERT(bp->bio_data == NULL,
("non-NULL bp->data in g_io_request(cmd=%hu)",
bp->bio_cmd));
}
if (cmd == BIO_READ || cmd == BIO_WRITE || cmd == BIO_DELETE) {
KASSERT(bp->bio_offset % cp->provider->sectorsize == 0,
("wrong offset %jd for sectorsize %u",
bp->bio_offset, cp->provider->sectorsize));
KASSERT(bp->bio_length % cp->provider->sectorsize == 0,
("wrong length %jd for sectorsize %u",
bp->bio_length, cp->provider->sectorsize));
}
g_trace(G_T_BIO, "bio_request(%p) from %p(%s) to %p(%s) cmd %d",
bp, cp, cp->geom->name, pp, pp->name, bp->bio_cmd);
bp->bio_from = cp;
bp->bio_to = pp;
bp->bio_error = 0;
bp->bio_completed = 0;
KASSERT(!(bp->bio_flags & BIO_ONQUEUE),
("Bio already on queue bp=%p", bp));
if ((g_collectstats & G_STATS_CONSUMERS) != 0 ||
((g_collectstats & G_STATS_PROVIDERS) != 0 && pp->stat != NULL))
binuptime(&bp->bio_t0);
else
getbinuptime(&bp->bio_t0);
#ifdef GET_STACK_USAGE
direct = (cp->flags & G_CF_DIRECT_SEND) != 0 &&
(pp->flags & G_PF_DIRECT_RECEIVE) != 0 &&
!g_is_geom_thread(curthread) &&
((pp->flags & G_PF_ACCEPT_UNMAPPED) != 0 ||
(bp->bio_flags & BIO_UNMAPPED) == 0 || THREAD_CAN_SLEEP()) &&
pace == 0;
if (direct) {
/* Block direct execution if less then half of stack left. */
size_t st, su;
GET_STACK_USAGE(st, su);
if (su * 2 > st)
direct = 0;
}
#else
direct = 0;
#endif
if (!TAILQ_EMPTY(&g_classifier_tailq) && !bp->bio_classifier1) {
g_bioq_lock(&g_bio_run_down);
g_run_classifiers(bp);
g_bioq_unlock(&g_bio_run_down);
}
/*
* The statistics collection is lockless, as such, but we
* can not update one instance of the statistics from more
* than one thread at a time, so grab the lock first.
*/
mtxp = mtx_pool_find(mtxpool_sleep, pp);
mtx_lock(mtxp);
if (g_collectstats & G_STATS_PROVIDERS)
devstat_start_transaction(pp->stat, &bp->bio_t0);
if (g_collectstats & G_STATS_CONSUMERS)
devstat_start_transaction(cp->stat, &bp->bio_t0);
pp->nstart++;
cp->nstart++;
mtx_unlock(mtxp);
if (direct) {
error = g_io_check(bp);
if (error >= 0) {
CTR3(KTR_GEOM, "g_io_request g_io_check on bp %p "
"provider %s returned %d", bp, bp->bio_to->name,
error);
g_io_deliver(bp, error);
return;
}
bp->bio_to->geom->start(bp);
} else {
g_bioq_lock(&g_bio_run_down);
first = TAILQ_EMPTY(&g_bio_run_down.bio_queue);
TAILQ_INSERT_TAIL(&g_bio_run_down.bio_queue, bp, bio_queue);
bp->bio_flags |= BIO_ONQUEUE;
g_bio_run_down.bio_queue_length++;
g_bioq_unlock(&g_bio_run_down);
/* Pass it on down. */
if (first)
wakeup(&g_wait_down);
}
}
void
g_io_deliver(struct bio *bp, int error)
{
struct bintime now;
struct g_consumer *cp;
struct g_provider *pp;
struct mtx *mtxp;
int direct, first;
KASSERT(bp != NULL, ("NULL bp in g_io_deliver"));
pp = bp->bio_to;
KASSERT(pp != NULL, ("NULL bio_to in g_io_deliver"));
cp = bp->bio_from;
if (cp == NULL) {
bp->bio_error = error;
bp->bio_done(bp);
return;
}
KASSERT(cp != NULL, ("NULL bio_from in g_io_deliver"));
KASSERT(cp->geom != NULL, ("NULL bio_from->geom in g_io_deliver"));
#ifdef DIAGNOSTIC
/*
* Some classes - GJournal in particular - can modify bio's
* private fields while the bio is in transit; G_GEOM_VOLATILE_BIO
* flag means it's an expected behaviour for that particular geom.
*/
if ((cp->geom->flags & G_GEOM_VOLATILE_BIO) == 0) {
KASSERT(bp->bio_caller1 == bp->_bio_caller1,
("bio_caller1 used by the provider %s", pp->name));
KASSERT(bp->bio_caller2 == bp->_bio_caller2,
("bio_caller2 used by the provider %s", pp->name));
KASSERT(bp->bio_cflags == bp->_bio_cflags,
("bio_cflags used by the provider %s", pp->name));
}
#endif
KASSERT(bp->bio_completed >= 0, ("bio_completed can't be less than 0"));
KASSERT(bp->bio_completed <= bp->bio_length,
("bio_completed can't be greater than bio_length"));
g_trace(G_T_BIO,
"g_io_deliver(%p) from %p(%s) to %p(%s) cmd %d error %d off %jd len %jd",
bp, cp, cp->geom->name, pp, pp->name, bp->bio_cmd, error,
(intmax_t)bp->bio_offset, (intmax_t)bp->bio_length);
KASSERT(!(bp->bio_flags & BIO_ONQUEUE),
("Bio already on queue bp=%p", bp));
/*
* XXX: next two doesn't belong here
*/
bp->bio_bcount = bp->bio_length;
bp->bio_resid = bp->bio_bcount - bp->bio_completed;
#ifdef GET_STACK_USAGE
direct = (pp->flags & G_PF_DIRECT_SEND) &&
(cp->flags & G_CF_DIRECT_RECEIVE) &&
!g_is_geom_thread(curthread);
if (direct) {
/* Block direct execution if less then half of stack left. */
size_t st, su;
GET_STACK_USAGE(st, su);
if (su * 2 > st)
direct = 0;
}
#else
direct = 0;
#endif
/*
* The statistics collection is lockless, as such, but we
* can not update one instance of the statistics from more
* than one thread at a time, so grab the lock first.
*/
if ((g_collectstats & G_STATS_CONSUMERS) != 0 ||
((g_collectstats & G_STATS_PROVIDERS) != 0 && pp->stat != NULL))
binuptime(&now);
mtxp = mtx_pool_find(mtxpool_sleep, cp);
mtx_lock(mtxp);
if (g_collectstats & G_STATS_PROVIDERS)
devstat_end_transaction_bio_bt(pp->stat, bp, &now);
if (g_collectstats & G_STATS_CONSUMERS)
devstat_end_transaction_bio_bt(cp->stat, bp, &now);
cp->nend++;
pp->nend++;
mtx_unlock(mtxp);
if (error != ENOMEM) {
bp->bio_error = error;
if (direct) {
biodone(bp);
} else {
g_bioq_lock(&g_bio_run_up);
first = TAILQ_EMPTY(&g_bio_run_up.bio_queue);
TAILQ_INSERT_TAIL(&g_bio_run_up.bio_queue, bp, bio_queue);
bp->bio_flags |= BIO_ONQUEUE;
g_bio_run_up.bio_queue_length++;
g_bioq_unlock(&g_bio_run_up);
if (first)
wakeup(&g_wait_up);
}
return;
}
if (bootverbose)
printf("ENOMEM %p on %p(%s)\n", bp, pp, pp->name);
bp->bio_children = 0;
bp->bio_inbed = 0;
bp->bio_driver1 = NULL;
bp->bio_driver2 = NULL;
bp->bio_pflags = 0;
g_io_request(bp, cp);
pace = 1;
return;
}
SYSCTL_DECL(_kern_geom);
static long transient_maps;
SYSCTL_LONG(_kern_geom, OID_AUTO, transient_maps, CTLFLAG_RD,
&transient_maps, 0,
"Total count of the transient mapping requests");
u_int transient_map_retries = 10;
SYSCTL_UINT(_kern_geom, OID_AUTO, transient_map_retries, CTLFLAG_RW,
&transient_map_retries, 0,
"Max count of retries used before giving up on creating transient map");
int transient_map_hard_failures;
SYSCTL_INT(_kern_geom, OID_AUTO, transient_map_hard_failures, CTLFLAG_RD,
&transient_map_hard_failures, 0,
"Failures to establish the transient mapping due to retry attempts "
"exhausted");
int transient_map_soft_failures;
SYSCTL_INT(_kern_geom, OID_AUTO, transient_map_soft_failures, CTLFLAG_RD,
&transient_map_soft_failures, 0,
"Count of retried failures to establish the transient mapping");
int inflight_transient_maps;
SYSCTL_INT(_kern_geom, OID_AUTO, inflight_transient_maps, CTLFLAG_RD,
&inflight_transient_maps, 0,
"Current count of the active transient maps");
static int
g_io_transient_map_bio(struct bio *bp)
{
vm_offset_t addr;
long size;
u_int retried;
KASSERT(unmapped_buf_allowed, ("unmapped disabled"));
size = round_page(bp->bio_ma_offset + bp->bio_length);
KASSERT(size / PAGE_SIZE == bp->bio_ma_n, ("Bio too short %p", bp));
addr = 0;
retried = 0;
atomic_add_long(&transient_maps, 1);
retry:
if (vmem_alloc(transient_arena, size, M_BESTFIT | M_NOWAIT, &addr)) {
if (transient_map_retries != 0 &&
retried >= transient_map_retries) {
CTR2(KTR_GEOM, "g_down cannot map bp %p provider %s",
bp, bp->bio_to->name);
atomic_add_int(&transient_map_hard_failures, 1);
return (EDEADLK/* XXXKIB */);
} else {
/*
* Naive attempt to quisce the I/O to get more
* in-flight requests completed and defragment
* the transient_arena.
*/
CTR3(KTR_GEOM, "g_down retrymap bp %p provider %s r %d",
bp, bp->bio_to->name, retried);
pause("g_d_tra", hz / 10);
retried++;
atomic_add_int(&transient_map_soft_failures, 1);
goto retry;
}
}
atomic_add_int(&inflight_transient_maps, 1);
pmap_qenter((vm_offset_t)addr, bp->bio_ma, OFF_TO_IDX(size));
bp->bio_data = (caddr_t)addr + bp->bio_ma_offset;
bp->bio_flags |= BIO_TRANSIENT_MAPPING;
bp->bio_flags &= ~BIO_UNMAPPED;
return (EJUSTRETURN);
}
void
g_io_schedule_down(struct thread *tp __unused)
{
struct bio *bp;
int error;
for(;;) {
g_bioq_lock(&g_bio_run_down);
bp = g_bioq_first(&g_bio_run_down);
if (bp == NULL) {
CTR0(KTR_GEOM, "g_down going to sleep");
msleep(&g_wait_down, &g_bio_run_down.bio_queue_lock,
PRIBIO | PDROP, "-", 0);
continue;
}
CTR0(KTR_GEOM, "g_down has work to do");
g_bioq_unlock(&g_bio_run_down);
if (pace != 0) {
/*
* There has been at least one memory allocation
* failure since the last I/O completed. Pause 1ms to
* give the system a chance to free up memory. We only
* do this once because a large number of allocations
* can fail in the direct dispatch case and there's no
* relationship between the number of these failures and
* the length of the outage. If there's still an outage,
* we'll pause again and again until it's
* resolved. Older versions paused longer and once per
* allocation failure. This was OK for a single threaded
* g_down, but with direct dispatch would lead to max of
* 10 IOPs for minutes at a time when transient memory
* issues prevented allocation for a batch of requests
* from the upper layers.
*
* XXX This pacing is really lame. It needs to be solved
* by other methods. This is OK only because the worst
* case scenario is so rare. In the worst case scenario
* all memory is tied up waiting for I/O to complete
* which can never happen since we can't allocate bios
* for that I/O.
*/
CTR0(KTR_GEOM, "g_down pacing self");
pause("g_down", min(hz/1000, 1));
pace = 0;
}
CTR2(KTR_GEOM, "g_down processing bp %p provider %s", bp,
bp->bio_to->name);
error = g_io_check(bp);
if (error >= 0) {
CTR3(KTR_GEOM, "g_down g_io_check on bp %p provider "
"%s returned %d", bp, bp->bio_to->name, error);
g_io_deliver(bp, error);
continue;
}
THREAD_NO_SLEEPING();
CTR4(KTR_GEOM, "g_down starting bp %p provider %s off %ld "
"len %ld", bp, bp->bio_to->name, bp->bio_offset,
bp->bio_length);
bp->bio_to->geom->start(bp);
THREAD_SLEEPING_OK();
}
}
void
bio_taskqueue(struct bio *bp, bio_task_t *func, void *arg)
{
bp->bio_task = func;
bp->bio_task_arg = arg;
/*
* The taskqueue is actually just a second queue off the "up"
* queue, so we use the same lock.
*/
g_bioq_lock(&g_bio_run_up);
KASSERT(!(bp->bio_flags & BIO_ONQUEUE),
("Bio already on queue bp=%p target taskq", bp));
bp->bio_flags |= BIO_ONQUEUE;
TAILQ_INSERT_TAIL(&g_bio_run_task.bio_queue, bp, bio_queue);
g_bio_run_task.bio_queue_length++;
wakeup(&g_wait_up);
g_bioq_unlock(&g_bio_run_up);
}
void
g_io_schedule_up(struct thread *tp __unused)
{
struct bio *bp;
for(;;) {
g_bioq_lock(&g_bio_run_up);
bp = g_bioq_first(&g_bio_run_task);
if (bp != NULL) {
g_bioq_unlock(&g_bio_run_up);
THREAD_NO_SLEEPING();
CTR1(KTR_GEOM, "g_up processing task bp %p", bp);
bp->bio_task(bp->bio_task_arg);
THREAD_SLEEPING_OK();
continue;
}
bp = g_bioq_first(&g_bio_run_up);
if (bp != NULL) {
g_bioq_unlock(&g_bio_run_up);
THREAD_NO_SLEEPING();
CTR4(KTR_GEOM, "g_up biodone bp %p provider %s off "
"%jd len %ld", bp, bp->bio_to->name,
bp->bio_offset, bp->bio_length);
biodone(bp);
THREAD_SLEEPING_OK();
continue;
}
CTR0(KTR_GEOM, "g_up going to sleep");
msleep(&g_wait_up, &g_bio_run_up.bio_queue_lock,
PRIBIO | PDROP, "-", 0);
}
}
void *
g_read_data(struct g_consumer *cp, off_t offset, off_t length, int *error)
{
struct bio *bp;
void *ptr;
int errorc;
KASSERT(length > 0 && length >= cp->provider->sectorsize &&
length <= MAXPHYS, ("g_read_data(): invalid length %jd",
(intmax_t)length));
bp = g_alloc_bio();
bp->bio_cmd = BIO_READ;
bp->bio_done = NULL;
bp->bio_offset = offset;
bp->bio_length = length;
ptr = g_malloc(length, M_WAITOK);
bp->bio_data = ptr;
g_io_request(bp, cp);
errorc = biowait(bp, "gread");
if (error != NULL)
*error = errorc;
g_destroy_bio(bp);
if (errorc) {
g_free(ptr);
ptr = NULL;
}
return (ptr);
}
int
g_write_data(struct g_consumer *cp, off_t offset, void *ptr, off_t length)
{
struct bio *bp;
int error;
KASSERT(length > 0 && length >= cp->provider->sectorsize &&
length <= MAXPHYS, ("g_write_data(): invalid length %jd",
(intmax_t)length));
bp = g_alloc_bio();
bp->bio_cmd = BIO_WRITE;
bp->bio_done = NULL;
bp->bio_offset = offset;
bp->bio_length = length;
bp->bio_data = ptr;
g_io_request(bp, cp);
error = biowait(bp, "gwrite");
g_destroy_bio(bp);
return (error);
}
int
g_delete_data(struct g_consumer *cp, off_t offset, off_t length)
{
struct bio *bp;
int error;
KASSERT(length > 0 && length >= cp->provider->sectorsize,
("g_delete_data(): invalid length %jd", (intmax_t)length));
bp = g_alloc_bio();
bp->bio_cmd = BIO_DELETE;
bp->bio_done = NULL;
bp->bio_offset = offset;
bp->bio_length = length;
bp->bio_data = NULL;
g_io_request(bp, cp);
error = biowait(bp, "gdelete");
g_destroy_bio(bp);
return (error);
}
void
g_print_bio(struct bio *bp)
{
const char *pname, *cmd = NULL;
if (bp->bio_to != NULL)
pname = bp->bio_to->name;
else
pname = "[unknown]";
switch (bp->bio_cmd) {
case BIO_GETATTR:
cmd = "GETATTR";
printf("%s[%s(attr=%s)]", pname, cmd, bp->bio_attribute);
return;
case BIO_FLUSH:
cmd = "FLUSH";
printf("%s[%s]", pname, cmd);
return;
case BIO_ZONE: {
char *subcmd = NULL;
cmd = "ZONE";
switch (bp->bio_zone.zone_cmd) {
case DISK_ZONE_OPEN:
subcmd = "OPEN";
break;
case DISK_ZONE_CLOSE:
subcmd = "CLOSE";
break;
case DISK_ZONE_FINISH:
subcmd = "FINISH";
break;
case DISK_ZONE_RWP:
subcmd = "RWP";
break;
case DISK_ZONE_REPORT_ZONES:
subcmd = "REPORT ZONES";
break;
case DISK_ZONE_GET_PARAMS:
subcmd = "GET PARAMS";
break;
default:
subcmd = "UNKNOWN";
break;
}
printf("%s[%s,%s]", pname, cmd, subcmd);
return;
}
case BIO_READ:
cmd = "READ";
break;
case BIO_WRITE:
cmd = "WRITE";
break;
case BIO_DELETE:
cmd = "DELETE";
break;
default:
cmd = "UNKNOWN";
printf("%s[%s()]", pname, cmd);
return;
}
printf("%s[%s(offset=%jd, length=%jd)]", pname, cmd,
(intmax_t)bp->bio_offset, (intmax_t)bp->bio_length);
}