84 lines
2.0 KiB
Plaintext
84 lines
2.0 KiB
Plaintext
$FreeBSD$
|
|
|
|
Marvell Device bus (localbus) configuration.
|
|
============================================
|
|
|
|
1. Properties for localbus nodes
|
|
|
|
1.1 ranges
|
|
|
|
Property: ranges
|
|
|
|
Value type: <prop-encoded-array> encoded as arbitrary number of localbus
|
|
nodes specifiers.
|
|
|
|
Description: ranges property defines values used for mapping devices
|
|
connected to localbus, in Marvell devices it is used also for
|
|
setting decoding windows.
|
|
|
|
a) child node address-cells:
|
|
- first cell: number of bank (chip select)
|
|
- second cell: (Marvell devices) Target ID for decoding
|
|
windows setup
|
|
|
|
b) parent node address cells:
|
|
- address offset: used with parent's node base address to
|
|
specify base address of mapped device
|
|
|
|
c) child node size-cells:
|
|
- size: defines amount of memory that should be reserved for
|
|
device
|
|
|
|
1.2 bank-count
|
|
|
|
Property: bank-count
|
|
|
|
Value type: <u32>
|
|
|
|
Description: The bank_count property defines maximum number of banks on
|
|
localbus node. Bank is most often interpreted as device chip
|
|
select, but may also describe another device (e.g. SPI flash).
|
|
|
|
1.3 Example
|
|
|
|
localbus@0 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "mrvl,lbc";
|
|
bank-count = <5>;
|
|
|
|
/* This reflects CPU decode windows setup. */
|
|
ranges = <0x0 0x2f 0xb2200000 0x00100000
|
|
0x1 0x3e 0xb2100000 0x00100000
|
|
0x2 0x3d 0xb0000000 0x02000000
|
|
0x3 0x3b 0xb2000000 0x00100000>;
|
|
};
|
|
|
|
2. Properties for localbus consumer nodes:
|
|
|
|
2.1 reg
|
|
|
|
Property: reg
|
|
|
|
Value type: <prop-encoded-array>
|
|
|
|
Description: A standard property required for localbus child nodes. Defines
|
|
the device memory region.
|
|
|
|
a) first cell: number of bank (chip select)
|
|
|
|
b) address offset: used with address offset from parent's ranges
|
|
for corresponding bank to specify base address of
|
|
the device
|
|
|
|
c) size: defines size of the device memory region
|
|
|
|
2.2 Example
|
|
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x00100000>;
|
|
};
|