d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9ae843f2f7
freebsd-dev/sys/dev/vx/if_vx.c
gpalmer 3a334c3206 Add $Id$
1998-02-21 05:35:02 +00:00

1090 lines
26 KiB
C
Raw Blame History

/*
* Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Herb Peyerl.
* 4. The name of Herb Peyerl may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id$
*
*/
/*
* Created from if_ep.c driver by Fred Gray (fgray@rice.edu) to support
* the 3c590 family.
*/
/*
* Modified from the FreeBSD 1.1.5.1 version by:
* Andres Vega Garcia
* INRIA - Sophia Antipolis, France
* avega@sophia.inria.fr
*/
/*
* Promiscuous mode added and interrupt logic slightly changed
* to reduce the number of adapter failures. Transceiver select
* logic changed to use value from EEPROM. Autoconfiguration
* features added.
* Done by:
* Serge Babkin
* Chelindbank (Chelyabinsk, Russia)
* babkin@hq.icb.chel.su
*/
#include "vx.h"
#if NVX > 0
#if NVX < 4 /* These cost 4 bytes apiece, so give us 4 */
#undef NVX
#define NVX 4
#endif
#include "bpfilter.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/ethernet.h>
#include <net/if_arp.h>
#if NBPFILTER > 0
#include <net/bpf.h>
#endif
#include <machine/clock.h>
#include <dev/vx/if_vxreg.h>
#define ETHER_MAX_LEN 1518
#define ETHER_ADDR_LEN 6
struct vx_softc *vx_softc[NVX];
u_long vx_count; /* both PCI and EISA */
static struct connector_entry {
int bit;
char *name;
} conn_tab[VX_CONNECTORS] = {
#define CONNECTOR_UTP 0
{ 0x08, "utp"},
#define CONNECTOR_AUI 1
{ 0x20, "aui"},
/* dummy */
{ 0, "???"},
#define CONNECTOR_BNC 3
{ 0x10, "bnc"},
#define CONNECTOR_TX 4
{ 0x02, "tx"},
#define CONNECTOR_FX 5
{ 0x04, "fx"},
#define CONNECTOR_MII 6
{ 0x40, "mii"},
{ 0, "???"}
};
/* struct vx_softc *vxalloc __P((int)); */
/* void *vxfree __P((struct vx_softc *)); */
/* int vxattach __P((struct vx_softc *)); */
static void vxtxstat __P((struct vx_softc *));
static int vxstatus __P((struct vx_softc *));
static void vxinit __P((void *));
static int vxioctl __P((struct ifnet *, int, caddr_t));
static void vxstart __P((struct ifnet *ifp));
static void vxwatchdog __P((struct ifnet *));
static void vxreset __P((struct vx_softc *));
/* void vxstop __P((struct vx_softc *)); */
static void vxread __P((struct vx_softc *));
static struct mbuf *vxget __P((struct vx_softc *, u_int));
static void vxmbuffill __P((void *));
static void vxmbufempty __P((struct vx_softc *));
static void vxsetfilter __P((struct vx_softc *));
static void vxgetlink __P((struct vx_softc *));
static void vxsetlink __P((struct vx_softc *));
/* int vxbusyeeprom __P((struct vx_softc *)); */
/* void vxintr __P((void *)); */
struct vx_softc *
vxalloc(unit)
int unit;
{
struct vx_softc *sc;
if (unit >= NVX) {
printf("vx%d: unit number too high.\n", unit);
return NULL;
}
if (vx_softc[unit]) {
printf("vx%d: already allocated.\n", unit);
return NULL;
}
sc = malloc(sizeof(struct vx_softc), M_DEVBUF, M_NOWAIT);
if (sc == NULL) {
printf("vx%d: cannot malloc.\n", unit);
return NULL;
}
bzero(sc, sizeof(struct vx_softc));
callout_handle_init(&sc->ch);
vx_softc[unit] = sc;
sc->unit = unit;
return (sc);
}
void
vxfree(sc)
struct vx_softc *sc;
{
vx_softc[sc->unit] = NULL;
free(sc, M_DEVBUF);
return;
}
int
vxattach(sc)
struct vx_softc *sc;
{
struct ifnet *ifp = &sc->arpcom.ac_if;
int i;
GO_WINDOW(0);
outw(VX_COMMAND, GLOBAL_RESET);
VX_BUSY_WAIT;
vxgetlink(sc);
/*
* Read the station address from the eeprom
*/
GO_WINDOW(0);
for (i = 0; i < 3; i++) {
int x;
if (vxbusyeeprom(sc))
return 0;
outw(BASE + VX_W0_EEPROM_COMMAND, EEPROM_CMD_RD
| (EEPROM_OEM_ADDR_0 + i));
if (vxbusyeeprom(sc))
return 0;
x = inw(BASE + VX_W0_EEPROM_DATA);
sc->arpcom.ac_enaddr[(i << 1)] = x >> 8;
sc->arpcom.ac_enaddr[(i << 1) + 1] = x;
}
printf(" address %6D\n", sc->arpcom.ac_enaddr, ":");
ifp->if_unit = sc->unit;
ifp->if_name = "vx";
ifp->if_mtu = ETHERMTU;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_output = ether_output;
ifp->if_start = vxstart;
ifp->if_ioctl = vxioctl;
ifp->if_init = vxinit;
ifp->if_watchdog = vxwatchdog;
ifp->if_softc = sc;
if_attach(ifp);
ether_ifattach(ifp);
#if NBPFILTER > 0
bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header));
#endif
sc->tx_start_thresh = 20; /* probably a good starting point. */
vxstop(sc);
return 1;
}
/*
* The order in here seems important. Otherwise we may not receive
* interrupts. ?!
*/
static void
vxinit(xsc)
void *xsc;
{
struct vx_softc *sc = (struct vx_softc *) xsc;
struct ifnet *ifp = &sc->arpcom.ac_if;
int i;
VX_BUSY_WAIT;
GO_WINDOW(2);
for (i = 0; i < 6; i++) /* Reload the ether_addr. */
outb(BASE + VX_W2_ADDR_0 + i, sc->arpcom.ac_enaddr[i]);
outw(BASE + VX_COMMAND, RX_RESET);
VX_BUSY_WAIT;
outw(BASE + VX_COMMAND, TX_RESET);
VX_BUSY_WAIT;
GO_WINDOW(1); /* Window 1 is operating window */
for (i = 0; i < 31; i++)
inb(BASE + VX_W1_TX_STATUS);
outw(BASE + VX_COMMAND,SET_RD_0_MASK | S_CARD_FAILURE |
S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL);
outw(BASE + VX_COMMAND,SET_INTR_MASK | S_CARD_FAILURE |
S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL);
/*
* Attempt to get rid of any stray interrupts that occured during
* configuration. On the i386 this isn't possible because one may
* already be queued. However, a single stray interrupt is
* unimportant.
*/
outw(BASE + VX_COMMAND, ACK_INTR | 0xff);
vxsetfilter(sc);
vxsetlink(sc);
outw(BASE + VX_COMMAND, RX_ENABLE);
outw(BASE + VX_COMMAND, TX_ENABLE);
vxmbuffill((caddr_t) sc);
/* Interface is now `running', with no output active. */
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
/* Attempt to start output, if any. */
vxstart(ifp);
}
static void
vxsetfilter(sc)
struct vx_softc *sc;
{
register struct ifnet *ifp = &sc->arpcom.ac_if;
GO_WINDOW(1); /* Window 1 is operating window */
outw(BASE + VX_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL | FIL_BRDCST |
FIL_MULTICAST |
((ifp->if_flags & IFF_PROMISC) ? FIL_PROMISC : 0 ));
}
static void
vxgetlink(sc)
struct vx_softc *sc;
{
int n, k;
GO_WINDOW(3);
sc->vx_connectors = inw(BASE + VX_W3_RESET_OPT) & 0x7f;
for (n = 0, k = 0; k < VX_CONNECTORS; k++) {
if (sc->vx_connectors & conn_tab[k].bit) {
if (n > 0) {
printf("/");
}
printf(conn_tab[k].name);
n++;
}
}
if (sc->vx_connectors == 0) {
printf("no connectors!");
return;
}
GO_WINDOW(3);
sc->vx_connector = (inl(BASE + VX_W3_INTERNAL_CFG)
& INTERNAL_CONNECTOR_MASK)
>> INTERNAL_CONNECTOR_BITS;
if (sc->vx_connector & 0x10) {
sc->vx_connector &= 0x0f;
printf("[*%s*]", conn_tab[sc->vx_connector].name);
printf(": disable 'auto select' with DOS util!", sc->unit);
} else {
printf("[*%s*]", conn_tab[sc->vx_connector].name);
}
}
static void
vxsetlink(sc)
struct vx_softc *sc;
{
register struct ifnet *ifp = &sc->arpcom.ac_if;
int i, j, k;
char *reason, *warning;
static short prev_flags;
static char prev_conn = -1;
if (prev_conn == -1) {
prev_conn = sc->vx_connector;
}
/*
* S.B.
*
* Now behavior was slightly changed:
*
* if any of flags link[0-2] is used and its connector is
* physically present the following connectors are used:
*
* link0 - AUI * highest precedence
* link1 - BNC
* link2 - UTP * lowest precedence
*
* If none of them is specified then
* connector specified in the EEPROM is used
* (if present on card or UTP if not).
*/
i = sc->vx_connector; /* default in EEPROM */
reason = "default";
warning = 0;
if (ifp->if_flags & IFF_LINK0) {
if (sc->vx_connectors & conn_tab[CONNECTOR_AUI].bit) {
i = CONNECTOR_AUI;
reason = "link0";
} else {
warning = "aui not present! (link0)";
}
} else if (ifp->if_flags & IFF_LINK1) {
if (sc->vx_connectors & conn_tab[CONNECTOR_BNC].bit) {
i = CONNECTOR_BNC;
reason = "link1";
} else {
warning = "bnc not present! (link1)";
}
} else if (ifp->if_flags & IFF_LINK2) {
if (sc->vx_connectors & conn_tab[CONNECTOR_UTP].bit) {
i = CONNECTOR_UTP;
reason = "link2";
} else {
warning = "utp not present! (link2)";
}
} else if ((sc->vx_connectors & conn_tab[sc->vx_connector].bit) == 0) {
warning = "strange connector type in EEPROM.";
reason = "forced";
i = CONNECTOR_UTP;
}
/* Avoid unnecessary message. */
k = (prev_flags ^ ifp->if_flags) & (IFF_LINK0 | IFF_LINK1 | IFF_LINK2);
if ((k != 0) || (prev_conn != i)) {
if (warning != 0) {
printf("vx%d: warning: %s\n", sc->unit, warning);
}
printf("vx%d: selected %s. (%s)\n",
sc->unit, conn_tab[i].name, reason);
}
/* Set the selected connector. */
GO_WINDOW(3);
j = inl(BASE + VX_W3_INTERNAL_CFG) & ~INTERNAL_CONNECTOR_MASK;
outl(BASE + VX_W3_INTERNAL_CFG, j | (i <<INTERNAL_CONNECTOR_BITS));
/* First, disable all. */
outw(BASE + VX_COMMAND, STOP_TRANSCEIVER);
DELAY(800);
GO_WINDOW(4);
outw(BASE + VX_W4_MEDIA_TYPE, 0);
/* Second, enable the selected one. */
switch(i) {
case CONNECTOR_UTP:
GO_WINDOW(4);
outw(BASE + VX_W4_MEDIA_TYPE, ENABLE_UTP);
break;
case CONNECTOR_BNC:
outw(BASE + VX_COMMAND, START_TRANSCEIVER);
DELAY(800);
break;
case CONNECTOR_TX:
case CONNECTOR_FX:
GO_WINDOW(4);
outw(BASE + VX_W4_MEDIA_TYPE, LINKBEAT_ENABLE);
break;
default: /* AUI and MII fall here */
break;
}
GO_WINDOW(1);
prev_flags = ifp->if_flags;
prev_conn = i;
}
static void
vxstart(ifp)
struct ifnet *ifp;
{
register struct vx_softc *sc = vx_softc[ifp->if_unit];
register struct mbuf *m, *m0;
int sh, len, pad;
/* Don't transmit if interface is busy or not running */
if ((sc->arpcom.ac_if.if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING)
return;
startagain:
/* Sneak a peek at the next packet */
m0 = ifp->if_snd.ifq_head;
if (m0 == 0) {
return;
}
/* We need to use m->m_pkthdr.len, so require the header */
if ((m0->m_flags & M_PKTHDR) == 0)
panic("vxstart: no header mbuf");
len = m0->m_pkthdr.len;
pad = (4 - len) & 3;
/*
* The 3c509 automatically pads short packets to minimum ethernet length,
* but we drop packets that are too large. Perhaps we should truncate
* them instead?
*/
if (len + pad > ETHER_MAX_LEN) {
/* packet is obviously too large: toss it */
++ifp->if_oerrors;
IF_DEQUEUE(&ifp->if_snd, m0);
m_freem(m0);
goto readcheck;
}
VX_BUSY_WAIT;
if (inw(BASE + VX_W1_FREE_TX) < len + pad + 4) {
outw(BASE + VX_COMMAND, SET_TX_AVAIL_THRESH | ((len + pad + 4) >> 2));
/* not enough room in FIFO */
if (inw(BASE + VX_W1_FREE_TX) < len + pad + 4) { /* make sure */
ifp->if_flags |= IFF_OACTIVE;
ifp->if_timer = 1;
return;
}
}
outw(BASE + VX_COMMAND, SET_TX_AVAIL_THRESH | (8188 >> 2));
IF_DEQUEUE(&ifp->if_snd, m0);
if (m0 == 0) { /* not really needed */
return;
}
VX_BUSY_WAIT;
outw(BASE + VX_COMMAND, SET_TX_START_THRESH |
((len / 4 + sc->tx_start_thresh) >> 2));
#if NBPFILTER > 0
if (sc->arpcom.ac_if.if_bpf) {
bpf_mtap(&sc->arpcom.ac_if, m0);
}
#endif
/*
* Do the output at splhigh() so that an interrupt from another device
* won't cause a FIFO underrun.
*/
sh = splhigh();
outl(BASE + VX_W1_TX_PIO_WR_1, len | TX_INDICATE);
for (m = m0; m != 0;) {
if (m->m_len > 3)
outsl(BASE + VX_W1_TX_PIO_WR_1, mtod(m, caddr_t), m->m_len / 4);
if (m->m_len & 3)
outsb(BASE + VX_W1_TX_PIO_WR_1,
mtod(m, caddr_t) + (m->m_len & ~3) , m->m_len & 3);
MFREE(m, m0);
m = m0;
}
while (pad--)
outb(BASE + VX_W1_TX_PIO_WR_1, 0); /* Padding */
splx(sh);
++ifp->if_opackets;
ifp->if_timer = 1;
readcheck:
if ((inw(BASE + VX_W1_RX_STATUS) & ERR_INCOMPLETE) == 0) {
/* We received a complete packet. */
if ((inw(BASE + VX_STATUS) & S_INTR_LATCH) == 0) {
/*
* No interrupt, read the packet and continue
* Is this supposed to happen? Is my motherboard
* completely busted?
*/
vxread(sc);
} else
/* Got an interrupt, return so that it gets serviced. */
return;
} else {
/* Check if we are stuck and reset [see XXX comment] */
if (vxstatus(sc)) {
if (ifp->if_flags & IFF_DEBUG)
printf("vx%d: adapter reset\n", ifp->if_unit);
vxreset(sc);
}
}
goto startagain;
}
/*
* XXX: The 3c509 card can get in a mode where both the fifo status bit
* FIFOS_RX_OVERRUN and the status bit ERR_INCOMPLETE are set
* We detect this situation and we reset the adapter.
* It happens at times when there is a lot of broadcast traffic
* on the cable (once in a blue moon).
*/
static int
vxstatus(sc)
struct vx_softc *sc;
{
int fifost;
/*
* Check the FIFO status and act accordingly
*/
GO_WINDOW(4);
fifost = inw(BASE + VX_W4_FIFO_DIAG);
GO_WINDOW(1);
if (fifost & FIFOS_RX_UNDERRUN) {
if (sc->arpcom.ac_if.if_flags & IFF_DEBUG)
printf("vx%d: RX underrun\n", sc->unit);
vxreset(sc);
return 0;
}
if (fifost & FIFOS_RX_STATUS_OVERRUN) {
if (sc->arpcom.ac_if.if_flags & IFF_DEBUG)
printf("vx%d: RX Status overrun\n", sc->unit);
return 1;
}
if (fifost & FIFOS_RX_OVERRUN) {
if (sc->arpcom.ac_if.if_flags & IFF_DEBUG)
printf("vx%d: RX overrun\n", sc->unit);
return 1;
}
if (fifost & FIFOS_TX_OVERRUN) {
if (sc->arpcom.ac_if.if_flags & IFF_DEBUG)
printf("vx%d: TX overrun\n", sc->unit);
vxreset(sc);
return 0;
}
return 0;
}
static void
vxtxstat(sc)
struct vx_softc *sc;
{
int i;
/*
* We need to read+write TX_STATUS until we get a 0 status
* in order to turn off the interrupt flag.
*/
while ((i = inb(BASE + VX_W1_TX_STATUS)) & TXS_COMPLETE) {
outb(BASE + VX_W1_TX_STATUS, 0x0);
if (i & TXS_JABBER) {
++sc->arpcom.ac_if.if_oerrors;
if (sc->arpcom.ac_if.if_flags & IFF_DEBUG)
printf("vx%d: jabber (%x)\n", sc->unit, i);
vxreset(sc);
} else if (i & TXS_UNDERRUN) {
++sc->arpcom.ac_if.if_oerrors;
if (sc->arpcom.ac_if.if_flags & IFF_DEBUG)
printf("vx%d: fifo underrun (%x) @%d\n",
sc->unit, i, sc->tx_start_thresh);
if (sc->tx_succ_ok < 100)
sc->tx_start_thresh = min(ETHER_MAX_LEN, sc->tx_start_thresh + 20);
sc->tx_succ_ok = 0;
vxreset(sc);
} else if (i & TXS_MAX_COLLISION) {
++sc->arpcom.ac_if.if_collisions;
outw(BASE + VX_COMMAND, TX_ENABLE);
sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE;
} else
sc->tx_succ_ok = (sc->tx_succ_ok+1) & 127;
}
}
void
vxintr(sc)
struct vx_softc *sc;
{
register short status;
struct ifnet *ifp = &sc->arpcom.ac_if;
for (;;) {
outw(BASE + VX_COMMAND, C_INTR_LATCH);
status = inw(BASE + VX_STATUS);
if ((status & (S_TX_COMPLETE | S_TX_AVAIL |
S_RX_COMPLETE | S_CARD_FAILURE)) == 0)
break;
/*
* Acknowledge any interrupts. It's important that we do this
* first, since there would otherwise be a race condition.
* Due to the i386 interrupt queueing, we may get spurious
* interrupts occasionally.
*/
outw(BASE + VX_COMMAND, ACK_INTR | status);
if (status & S_RX_COMPLETE)
vxread(sc);
if (status & S_TX_AVAIL) {
ifp->if_timer = 0;
sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE;
vxstart(&sc->arpcom.ac_if);
}
if (status & S_CARD_FAILURE) {
printf("vx%d: adapter failure (%x)\n", sc->unit, status);
ifp->if_timer = 0;
vxreset(sc);
return;
}
if (status & S_TX_COMPLETE) {
ifp->if_timer = 0;
vxtxstat(sc);
vxstart(ifp);
}
}
/* no more interrupts */
return;
}
static void
vxread(sc)
struct vx_softc *sc;
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mbuf *m;
struct ether_header *eh;
u_int len;
len = inw(BASE + VX_W1_RX_STATUS);
again:
if (ifp->if_flags & IFF_DEBUG) {
int err = len & ERR_MASK;
char *s = NULL;
if (len & ERR_INCOMPLETE)
s = "incomplete packet";
else if (err == ERR_OVERRUN)
s = "packet overrun";
else if (err == ERR_RUNT)
s = "runt packet";
else if (err == ERR_ALIGNMENT)
s = "bad alignment";
else if (err == ERR_CRC)
s = "bad crc";
else if (err == ERR_OVERSIZE)
s = "oversized packet";
else if (err == ERR_DRIBBLE)
s = "dribble bits";
if (s)
printf("vx%d: %s\n", sc->unit, s);
}
if (len & ERR_INCOMPLETE)
return;
if (len & ERR_RX) {
++ifp->if_ierrors;
goto abort;
}
len &= RX_BYTES_MASK; /* Lower 11 bits = RX bytes. */
/* Pull packet off interface. */
m = vxget(sc, len);
if (m == 0) {
ifp->if_ierrors++;
goto abort;
}
++ifp->if_ipackets;
/* We assume the header fit entirely in one mbuf. */
eh = mtod(m, struct ether_header *);
#if NBPFILTER > 0
/*
* Check if there's a BPF listener on this interface.
* If so, hand off the raw packet to BPF.
*/
if (sc->arpcom.ac_if.if_bpf) {
bpf_mtap(&sc->arpcom.ac_if, m);
}
#endif
/*
* XXX: Some cards seem to be in promiscous mode all the time.
* we need to make sure we only get our own stuff always.
* bleah!
*/
if ((eh->ether_dhost[0] & 1) == 0 && /* !mcast and !bcast */
bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr,
sizeof(eh->ether_dhost)) != 0) {
m_freem(m);
return;
}
/* We assume the header fit entirely in one mbuf. */
m_adj(m, sizeof(struct ether_header));
ether_input(ifp, eh, m);
/*
* In periods of high traffic we can actually receive enough
* packets so that the fifo overrun bit will be set at this point,
* even though we just read a packet. In this case we
* are not going to receive any more interrupts. We check for
* this condition and read again until the fifo is not full.
* We could simplify this test by not using vxstatus(), but
* rechecking the RX_STATUS register directly. This test could
* result in unnecessary looping in cases where there is a new
* packet but the fifo is not full, but it will not fix the
* stuck behavior.
*
* Even with this improvement, we still get packet overrun errors
* which are hurting performance. Maybe when I get some more time
* I'll modify vxread() so that it can handle RX_EARLY interrupts.
*/
if (vxstatus(sc)) {
len = inw(BASE + VX_W1_RX_STATUS);
/* Check if we are stuck and reset [see XXX comment] */
if (len & ERR_INCOMPLETE) {
if (ifp->if_flags & IFF_DEBUG)
printf("vx%d: adapter reset\n", sc->unit);
vxreset(sc);
return;
}
goto again;
}
return;
abort:
outw(BASE + VX_COMMAND, RX_DISCARD_TOP_PACK);
}
static struct mbuf *
vxget(sc, totlen)
struct vx_softc *sc;
u_int totlen;
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mbuf *top, **mp, *m;
int len;
int sh;
m = sc->mb[sc->next_mb];
sc->mb[sc->next_mb] = 0;
if (m == 0) {
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == 0)
return 0;
} else {
/* If the queue is no longer full, refill. */
if (sc->last_mb == sc->next_mb && sc->buffill_pending == 0) {
sc->ch = timeout(vxmbuffill, sc, 1);
sc->buffill_pending = 1;
}
/* Convert one of our saved mbuf's. */
sc->next_mb = (sc->next_mb + 1) % MAX_MBS;
m->m_data = m->m_pktdat;
m->m_flags = M_PKTHDR;
}
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = totlen;
len = MHLEN;
top = 0;
mp = &top;
/*
* We read the packet at splhigh() so that an interrupt from another
* device doesn't cause the card's buffer to overflow while we're
* reading it. We may still lose packets at other times.
*/
sh = splhigh();
/*
* Since we don't set allowLargePackets bit in MacControl register,
* we can assume that totlen <= 1500bytes.
* The while loop will be performed iff we have a packet with
* MLEN < m_len < MINCLSIZE.
*/
while (totlen > 0) {
if (top) {
m = sc->mb[sc->next_mb];
sc->mb[sc->next_mb] = 0;
if (m == 0) {
MGET(m, M_DONTWAIT, MT_DATA);
if (m == 0) {
splx(sh);
m_freem(top);
return 0;
}
} else {
sc->next_mb = (sc->next_mb + 1) % MAX_MBS;
}
len = MLEN;
}
if (totlen >= MINCLSIZE) {
MCLGET(m, M_DONTWAIT);
if (m->m_flags & M_EXT)
len = MCLBYTES;
}
len = min(totlen, len);
if (len > 3)
insl(BASE + VX_W1_RX_PIO_RD_1, mtod(m, u_int32_t *), len / 4);
if (len & 3) {
insb(BASE + VX_W1_RX_PIO_RD_1, mtod(m, u_int8_t *) + (len & ~3),
len & 3);
}
m->m_len = len;
totlen -= len;
*mp = m;
mp = &m->m_next;
}
outw(BASE +VX_COMMAND, RX_DISCARD_TOP_PACK);
splx(sh);
return top;
}
static int
vxioctl(ifp, cmd, data)
register struct ifnet *ifp;
int cmd;
caddr_t data;
{
struct vx_softc *sc = vx_softc[ifp->if_unit];
struct ifreq *ifr = (struct ifreq *) data;
int s, error = 0;
s = splimp();
switch (cmd) {
case SIOCSIFADDR:
case SIOCGIFADDR:
ether_ioctl(ifp, cmd, data);
break;
case SIOCSIFFLAGS:
if ((ifp->if_flags & IFF_UP) == 0 &&
(ifp->if_flags & IFF_RUNNING) != 0) {
/*
* If interface is marked up and it is stopped, then
* start it.
*/
vxstop(sc);
ifp->if_flags &= ~IFF_RUNNING;
} else if ((ifp->if_flags & IFF_UP) != 0 &&
(ifp->if_flags & IFF_RUNNING) == 0) {
/*
* If interface is marked up and it is stopped, then
* start it.
*/
vxinit(sc);
} else {
/*
* deal with flags changes:
* IFF_MULTICAST, IFF_PROMISC,
* IFF_LINK0, IFF_LINK1,
*/
vxsetfilter(sc);
vxsetlink(sc);
}
break;
case SIOCSIFMTU:
/*
* Set the interface MTU.
*/
if (ifr->ifr_mtu > ETHERMTU) {
error = EINVAL;
} else {
ifp->if_mtu = ifr->ifr_mtu;
}
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
/*
* Multicast list has changed; set the hardware filter
* accordingly.
*/
vxreset(sc);
error = 0;
break;
default:
error = EINVAL;
}
splx(s);
return (error);
}
static void
vxreset(sc)
struct vx_softc *sc;
{
int s;
s = splimp();
vxstop(sc);
vxinit(sc);
splx(s);
}
static void
vxwatchdog(ifp)
struct ifnet *ifp;
{
struct vx_softc *sc = vx_softc[ifp->if_unit];
if (ifp->if_flags & IFF_DEBUG)
printf("vx%d: device timeout\n", ifp->if_unit);
ifp->if_flags &= ~IFF_OACTIVE;
vxstart(ifp);
vxintr(sc);
}
void
vxstop(sc)
struct vx_softc *sc;
{
struct ifnet *ifp = &sc->arpcom.ac_if;
ifp->if_timer = 0;
outw(BASE + VX_COMMAND, RX_DISABLE);
outw(BASE + VX_COMMAND, RX_DISCARD_TOP_PACK);
VX_BUSY_WAIT;
outw(BASE + VX_COMMAND, TX_DISABLE);
outw(BASE + VX_COMMAND, STOP_TRANSCEIVER);
DELAY(800);
outw(BASE + VX_COMMAND, RX_RESET);
VX_BUSY_WAIT;
outw(BASE + VX_COMMAND, TX_RESET);
VX_BUSY_WAIT;
outw(BASE + VX_COMMAND, C_INTR_LATCH);
outw(BASE + VX_COMMAND, SET_RD_0_MASK);
outw(BASE + VX_COMMAND, SET_INTR_MASK);
outw(BASE + VX_COMMAND, SET_RX_FILTER);
vxmbufempty(sc);
}
int
vxbusyeeprom(sc)
struct vx_softc *sc;
{
int j, i = 100;
while (i--) {
j = inw(BASE + VX_W0_EEPROM_COMMAND);
if (j & EEPROM_BUSY)
DELAY(100);
else
break;
}
if (!i) {
printf("vx%d: eeprom failed to come ready\n", sc->unit);
return (1);
}
return (0);
}
static void
vxmbuffill(sp)
void *sp;
{
struct vx_softc *sc = (struct vx_softc *) sp;
int s, i;
s = splimp();
i = sc->last_mb;
do {
if (sc->mb[i] == NULL)
MGET(sc->mb[i], M_DONTWAIT, MT_DATA);
if (sc->mb[i] == NULL)
break;
i = (i + 1) % MAX_MBS;
} while (i != sc->next_mb);
sc->last_mb = i;
/* If the queue was not filled, try again. */
if (sc->last_mb != sc->next_mb) {
sc->ch = timeout(vxmbuffill, sc, 1);
sc->buffill_pending = 1;
} else {
sc->buffill_pending = 0;
}
splx(s);
}
static void
vxmbufempty(sc)
struct vx_softc *sc;
{
int s, i;
s = splimp();
for (i = 0; i < MAX_MBS; i++) {
if (sc->mb[i]) {
m_freem(sc->mb[i]);
sc->mb[i] = NULL;
}
}
sc->last_mb = sc->next_mb = 0;
if (sc->buffill_pending != 0)
untimeout(vxmbuffill, sc, sc->ch);
splx(s);
}
#endif /* NVX > 0 */
Reference in New Issue View Git Blame Copy Permalink