freebsd-dev/sys/arm/mv/mvreg.h
Marcel Moolenaar 85fc5c3b93 Move the memory layout definitions and logic from mvreg.h to mvwin.h
so that it isn't exposured unless needed. In particular this means
that it's easier to tune the memory layout based on board details.
While here, remove inclusion of <machine/intr.h> from mvreg.h. This
also contains exposure to SoC specifics in MI drivers, because NIRQ
depends on the SoC.
2009-06-12 20:00:38 +00:00

368 lines
13 KiB
C

/*-
* Copyright (C) 2007-2008 MARVELL INTERNATIONAL LTD.
* All rights reserved.
*
* Developed by Semihalf.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of MARVELL nor the names of contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _MVREG_H_
#define _MVREG_H_
/*
* Interrupt sources
*/
#if defined(SOC_MV_ORION)
#define MV_INT_BRIDGE 0 /* AHB-MBus Bridge Interrupt */
#define MV_INT_UART0 3 /* UART0 Interrupt */
#define MV_INT_UART1 4
#define MV_INT_GPIO7_0 6 /* GPIO[7:0] Interrupt */
#define MV_INT_GPIO15_8 7 /* GPIO[15:8] Interrupt */
#define MV_INT_GPIO23_16 8 /* GPIO[23:16] Interrupt */
#define MV_INT_GPIO31_24 9 /* GPIO[31:24] Interrupt */
#define MV_INT_PEX0_ERR 10 /* PCI Express Error */
#define MV_INT_PEX0 11 /* PCI Express INTA,B,C,D Message */
#define MV_INT_PCI_ERR 15 /* PCI Error */
#define MV_INT_USB_BERR 16 /* USB Bridge Error */
#define MV_INT_USB_CI 17 /* USB Controller interrupt */
#define MV_INT_GBERX 18 /* GbE receive interrupt */
#define MV_INT_GBETX 19 /* GbE transmit interrupt */
#define MV_INT_GBEMISC 20 /* GbE misc. interrupt */
#define MV_INT_GBESUM 21 /* GbE summary interrupt */
#define MV_INT_GBEERR 22 /* GbE error interrupt */
#define MV_INT_IDMA_ERR 23 /* DMA error interrupt */
#define MV_INT_IDMA0 24 /* IDMA chan. 0 completion interrupt */
#define MV_INT_IDMA1 25 /* IDMA chan. 1 completion interrupt */
#define MV_INT_IDMA2 26 /* IDMA chan. 2 completion interrupt */
#define MV_INT_IDMA3 27 /* IDMA chan. 3 completion interrupt */
#define MV_INT_SATA 29 /* Serial-ATA Interrupt */
#elif defined(SOC_MV_KIRKWOOD)
#define MV_INT_BRIDGE 1 /* AHB-MBus Bridge Interrupt */
#define MV_INT_XOR0_CHAN0 5 /* XOR engine 0 channel 0 Interrupt */
#define MV_INT_XOR0_CHAN1 6 /* XOR engine 0 channel 1 Interrupt */
#define MV_INT_XOR1_CHAN0 7 /* XOR engine 1 channel 0 Interrupt */
#define MV_INT_XOR1_CHAN1 8 /* XOR engine 1 channel 1 Interrupt */
#define MV_INT_PEX0 9 /* PCI Express INTA,B,C,D Message */
#define MV_INT_GBESUM 11 /* GbE0 summary interrupt */
#define MV_INT_GBERX 12 /* GbE0 receive interrupt */
#define MV_INT_GBETX 13 /* GbE0 transmit interrupt */
#define MV_INT_GBEMISC 14 /* GbE0 misc. interrupt */
#define MV_INT_GBE1SUM 15 /* GbE1 summary interrupt */
#define MV_INT_GBE1RX 16 /* GbE1 receive interrupt */
#define MV_INT_GBE1TX 17 /* GbE1 transmit interrupt */
#define MV_INT_GBE1MISC 18 /* GbE1 misc. interrupt */
#define MV_INT_USB_CI 19 /* USB Controller interrupt */
#define MV_INT_SATA 21 /* Serial-ATA Interrupt */
#define MV_INT_CESA 22 /* Security engine completion int. */
#define MV_INT_IDMA_ERR 23 /* DMA error interrupt */
#define MV_INT_UART0 33 /* UART0 Interrupt */
#define MV_INT_UART1 34
#define MV_INT_GPIO7_0 35 /* GPIO[7:0] Interrupt */
#define MV_INT_GPIO15_8 36 /* GPIO[15:8] Interrupt */
#define MV_INT_GPIO23_16 37 /* GPIO[23:16] Interrupt */
#define MV_INT_GPIO31_24 38 /* GPIO[31:24] Interrupt */
#define MV_INT_GPIOHI7_0 39 /* GPIOHI[7:0] Interrupt */
#define MV_INT_GPIOHI15_8 40 /* GPIOHI[15:8] Interrupt */
#define MV_INT_GPIOHI23_16 41 /* GPIOHI[23:16] Interrupt */
#define MV_INT_XOR0_ERR 42 /* XOR engine 0 error Interrupt */
#define MV_INT_XOR1_ERR 43 /* XOR engine 1 error Interrupt */
#define MV_INT_PEX0_ERR 44 /* PCI Express Error */
#define MV_INT_GBEERR 46 /* GbE0 error interrupt */
#define MV_INT_GBE1ERR 47 /* GbE1 error interrupt */
#define MV_INT_USB_BERR 48 /* USB Bridge Error */
#elif defined(SOC_MV_DISCOVERY)
#define MV_INT_ERRSUM 0 /* Summary of error interrupts */
#define MV_INT_SPI 1 /* SPI interrupt */
#define MV_INT_TWSI0 2 /* TWSI0 interrupt */
#define MV_INT_TWSI1 3 /* TWSI1 interrupt */
#define MV_INT_IDMA0 4 /* IDMA Channel0 completion */
#define MV_INT_IDMA1 5 /* IDMA Channel0 completion */
#define MV_INT_IDMA2 6 /* IDMA Channel0 completion */
#define MV_INT_IDMA3 7 /* IDMA Channel0 completion */
#define MV_INT_TIMER0 8 /* Timer0 interrupt */
#define MV_INT_TIMER1 9 /* Timer1 interrupt */
#define MV_INT_TIMER2 10 /* Timer2 interrupt */
#define MV_INT_TIMER3 11 /* Timer3 interrupt */
#define MV_INT_UART0 12 /* UART0 interrupt */
#define MV_INT_UART1 13 /* UART1 interrupt */
#define MV_INT_UART2 14 /* UART2 interrupt */
#define MV_INT_UART3 15 /* UART3 interrupt */
#define MV_INT_USB0 16 /* USB0 interrupt */
#define MV_INT_USB1 17 /* USB1 interrupt */
#define MV_INT_USB2 18 /* USB2 interrupt */
#define MV_INT_CESA 19 /* Crypto engine completion interrupt */
#define MV_INT_XOR0 22 /* XOR engine 0 completion interrupt */
#define MV_INT_XOR1 23 /* XOR engine 1 completion interrupt */
#define MV_INT_SATA 26 /* SATA interrupt */
#define MV_INT_PEX00 32 /* PCI Express port 0.0 INTA/B/C/D */
#define MV_INT_PEX01 33 /* PCI Express port 0.1 INTA/B/C/D */
#define MV_INT_PEX02 34 /* PCI Express port 0.2 INTA/B/C/D */
#define MV_INT_PEX03 35 /* PCI Express port 0.3 INTA/B/C/D */
#define MV_INT_PEX10 36 /* PCI Express port 1.0 INTA/B/C/D */
#define MV_INT_PEX11 37 /* PCI Express port 1.1 INTA/B/C/D */
#define MV_INT_PEX12 38 /* PCI Express port 1.2 INTA/B/C/D */
#define MV_INT_PEX13 39 /* PCI Express port 1.3 INTA/B/C/D */
#define MV_INT_GBESUM 40 /* Gigabit Ethernet Port 0 summary */
#define MV_INT_GBERX 41 /* Gigabit Ethernet Port 0 Rx summary */
#define MV_INT_GBETX 42 /* Gigabit Ethernet Port 0 Tx summary */
#define MV_INT_GBEMISC 43 /* Gigabit Ethernet Port 0 Misc summ. */
#define MV_INT_GBE1SUM 44 /* Gigabit Ethernet Port 1 summary */
#define MV_INT_GBE1RX 45 /* Gigabit Ethernet Port 1 Rx summary */
#define MV_INT_GBE1TX 46 /* Gigabit Ethernet Port 1 Tx summary */
#define MV_INT_GBE1MISC 47 /* Gigabit Ethernet Port 1 Misc summ. */
#define MV_INT_GPIO7_0 56 /* GPIO[7:0] Interrupt */
#define MV_INT_GPIO15_8 57 /* GPIO[15:8] Interrupt */
#define MV_INT_GPIO23_16 58 /* GPIO[23:16] Interrupt */
#define MV_INT_GPIO31_24 59 /* GPIO[31:24] Interrupt */
#define MV_INT_DB_IN 60 /* Inbound Doorbell Cause reg Summary */
#define MV_INT_DB_OUT 61 /* Outbound Doorbell Cause reg Summ. */
#define MV_INT_CRYPT_ERR 64 /* Crypto engine error */
#define MV_INT_DEV_ERR 65 /* Device bus error */
#define MV_INT_IDMA_ERR 66 /* DMA error */
#define MV_INT_CPU_ERR 67 /* CPU error */
#define MV_INT_PEX0_ERR 68 /* PCI-Express port0 error */
#define MV_INT_PEX1_ERR 69 /* PCI-Express port1 error */
#define MV_INT_GBE_ERR 70 /* Gigabit Ethernet error */
#define MV_INT_USB_ERR 72 /* USB error */
#define MV_INT_DRAM_ERR 73 /* DRAM ECC error */
#define MV_INT_XOR_ERR 74 /* XOR engine error */
#define MV_INT_WD 79 /* WD Timer interrupt */
#endif /* SOC_MV_ORION */
#define BRIDGE_IRQ_CAUSE 0x10
#define BRIGDE_IRQ_MASK 0x14
#if defined(SOC_MV_DISCOVERY)
#define IRQ_CAUSE_ERROR 0x0
#define IRQ_CAUSE 0x4
#define IRQ_CAUSE_HI 0x8
#define IRQ_MASK_ERROR 0xC
#define IRQ_MASK 0x10
#define IRQ_MASK_HI 0x14
#define IRQ_CAUSE_SELECT 0x18
#define FIQ_MASK_ERROR 0x1C
#define FIQ_MASK 0x20
#define FIQ_MASK_HI 0x24
#define FIQ_CAUSE_SELECT 0x28
#define ENDPOINT_IRQ_MASK_ERROR 0x2C
#define ENDPOINT_IRQ_MASK 0x30
#define ENDPOINT_IRQ_MASK_HI 0x34
#define ENDPOINT_IRQ_CAUSE_SELECT 0x38
#else /* !SOC_MV_DISCOVERY */
#define IRQ_CAUSE 0x0
#define IRQ_MASK 0x4
#define FIQ_MASK 0x8
#define ENDPOINT_IRQ_MASK 0xC
#define IRQ_CAUSE_HI 0x10
#define IRQ_MASK_HI 0x14
#define FIQ_MASK_HI 0x18
#define ENDPOINT_IRQ_MASK_HI 0x1C
#define IRQ_CAUSE_ERROR (-1) /* Fake defines for unified */
#define IRQ_MASK_ERROR (-1) /* interrupt controller code */
#endif
#define BRIDGE_IRQ_CAUSE 0x10
#define IRQ_CPU_SELF 0x00000001
#define IRQ_TIMER0 0x00000002
#define IRQ_TIMER1 0x00000004
#define IRQ_TIMER_WD 0x00000008
#define BRIDGE_IRQ_MASK 0x14
#define IRQ_CPU_MASK 0x00000001
#define IRQ_TIMER0_MASK 0x00000002
#define IRQ_TIMER1_MASK 0x00000004
#define IRQ_TIMER_WD_MASK 0x00000008
/*
* System reset
*/
#define RSTOUTn_MASK 0x8
#define WD_RST_OUT_EN 0x00000002
#define SOFT_RST_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET 0xc
#define SYS_SOFT_RST 0x00000001
/*
* Power Control
*/
#define CPU_PM_CTRL 0x1C
#define CPU_PM_CTRL_NONE 0
#if defined(SOC_MV_KIRKWOOD)
#define CPU_PM_CTRL_GE0 (1 << 0)
#define CPU_PM_CTRL_PEX0_PHY (1 << 1)
#define CPU_PM_CTRL_PEX0 (1 << 2)
#define CPU_PM_CTRL_USB0 (1 << 3)
#define CPU_PM_CTRL_SDIO (1 << 4)
#define CPU_PM_CTRL_TSU (1 << 5)
#define CPU_PM_CTRL_DUNIT (1 << 6)
#define CPU_PM_CTRL_RUNIT (1 << 7)
#define CPU_PM_CTRL_XOR0 (1 << 8)
#define CPU_PM_CTRL_AUDIO (1 << 9)
#define CPU_PM_CTRL_SATA0 (1 << 14)
#define CPU_PM_CTRL_SATA1 (1 << 15)
#define CPU_PM_CTRL_XOR1 (1 << 16)
#define CPU_PM_CTRL_CRYPTO (1 << 17)
#define CPU_PM_CTRL_GE1 (1 << 18)
#define CPU_PM_CTRL_TDM (1 << 19)
#elif defined(SOC_MV_DISCOVERY)
#define CPU_PM_CTRL_GE0 (1 << 1)
#define CPU_PM_CTRL_GE1 (1 << 2)
#define CPU_PM_CTRL_PEX00 (1 << 5)
#define CPU_PM_CTRL_PEX01 (1 << 6)
#define CPU_PM_CTRL_PEX02 (1 << 7)
#define CPU_PM_CTRL_PEX03 (1 << 8)
#define CPU_PM_CTRL_PEX10 (1 << 9)
#define CPU_PM_CTRL_PEX11 (1 << 10)
#define CPU_PM_CTRL_PEX12 (1 << 11)
#define CPU_PM_CTRL_PEX13 (1 << 12)
#define CPU_PM_CTRL_SATA0_PHY (1 << 13)
#define CPU_PM_CTRL_SATA0 (1 << 14)
#define CPU_PM_CTRL_SATA1_PHY (1 << 15)
#define CPU_PM_CTRL_SATA1 (1 << 16)
#define CPU_PM_CTRL_USB0 (1 << 17)
#define CPU_PM_CTRL_USB1 (1 << 18)
#define CPU_PM_CTRL_USB2 (1 << 19)
#define CPU_PM_CTRL_IDMA (1 << 20)
#define CPU_PM_CTRL_XOR (1 << 21)
#define CPU_PM_CTRL_CRYPTO (1 << 22)
#define CPU_PM_CTRL_DEVICE (1 << 23)
#endif
/*
* Timers
*/
#define CPU_TIMER_CONTROL 0x0
#define CPU_TIMER0_EN 0x00000001
#define CPU_TIMER0_AUTO 0x00000002
#define CPU_TIMER1_EN 0x00000004
#define CPU_TIMER1_AUTO 0x00000008
#define CPU_TIMER_WD_EN 0x00000010
#define CPU_TIMER_WD_AUTO 0x00000020
#define CPU_TIMER0_REL 0x10
#define CPU_TIMER0 0x14
/*
* GPIO
*/
#define GPIO_DATA_OUT 0x00
#define GPIO_DATA_OUT_EN_CTRL 0x04
#define GPIO_BLINK_EN 0x08
#define GPIO_DATA_IN_POLAR 0x0c
#define GPIO_DATA_IN 0x10
#define GPIO_INT_CAUSE 0x14
#define GPIO_INT_EDGE_MASK 0x18
#define GPIO_INT_LEV_MASK 0x1c
#define GPIO_HI_DATA_OUT 0x40
#define GPIO_HI_DATA_OUT_EN_CTRL 0x44
#define GPIO_HI_BLINK_EN 0x48
#define GPIO_HI_DATA_IN_POLAR 0x4c
#define GPIO_HI_DATA_IN 0x50
#define GPIO_HI_INT_CAUSE 0x54
#define GPIO_HI_INT_EDGE_MASK 0x58
#define GPIO_HI_INT_LEV_MASK 0x5c
#define GPIO(n) (1 << (n))
#define MV_GPIO_MAX_NPINS 64
#define MV_GPIO_BLINK 0x1
#define MV_GPIO_POLAR_LOW 0x2
#define MV_GPIO_EDGE 0x4
#define MV_GPIO_LEVEL 0x8
#define IS_GPIO_IRQ(irq) ((irq) >= NIRQ && (irq) < NIRQ + MV_GPIO_MAX_NPINS)
#define GPIO2IRQ(gpio) ((gpio) + NIRQ)
#define IRQ2GPIO(irq) ((irq) - NIRQ)
/*
* MPP
*/
#if defined(SOC_MV_ORION)
#define MPP_CONTROL0 0x00
#define MPP_CONTROL1 0x04
#define MPP_CONTROL2 0x50
#elif defined(SOC_MV_KIRKWOOD) || defined(SOC_MV_DISCOVERY)
#define MPP_CONTROL0 0x00
#define MPP_CONTROL1 0x04
#define MPP_CONTROL2 0x08
#define MPP_CONTROL3 0x0C
#define MPP_CONTROL4 0x10
#define MPP_CONTROL5 0x14
#define MPP_CONTROL6 0x18
#else
#error SOC_MV_XX not defined
#endif
#if defined(SOC_MV_ORION)
#define SAMPLE_AT_RESET 0x10
#elif defined(SOC_MV_KIRKWOOD)
#define SAMPLE_AT_RESET 0x30
#elif defined(SOC_MV_DISCOVERY)
#define SAMPLE_AT_RESET_LO 0x30
#define SAMPLE_AT_RESET_HI 0x34
#else
#error SOC_MV_XX not defined
#endif
/*
* Clocks
*/
#if defined(SOC_MV_ORION)
#define TCLK_MASK 0x00000300
#define TCLK_SHIFT 0x08
#elif defined(SOC_MV_DISCOVERY)
#define TCLK_MASK 0x00000180
#define TCLK_SHIFT 0x07
#endif
#define TCLK_100MHZ 100000000
#define TCLK_125MHZ 125000000
#define TCLK_133MHZ 133333333
#define TCLK_150MHZ 150000000
#define TCLK_166MHZ 166666667
#define TCLK_200MHZ 200000000
/*
* Chip ID
*/
#define MV_DEV_88F5181 0x5181
#define MV_DEV_88F5182 0x5182
#define MV_DEV_88F5281 0x5281
#define MV_DEV_88F6281 0x6281
#define MV_DEV_MV78100_Z0 0x6381
#define MV_DEV_MV78100 0x7810
#endif /* _MVREG_H_ */