freebsd-dev/share/mk/dirdeps.mk
Simon J. Gerraty ccfb965433 Add META_MODE support.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.

Still need to add real targets under targets/ to build packages.

Differential Revision:       D2796
Reviewed by: brooks imp
2015-06-13 19:20:56 +00:00

653 lines
22 KiB
Makefile

# $FreeBSD$
# $Id: dirdeps.mk,v 1.54 2015/06/08 20:55:11 sjg Exp $
# Copyright (c) 2010-2013, Juniper Networks, Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# Much of the complexity here is for supporting cross-building.
# If a tree does not support that, simply using plain Makefile.depend
# should provide sufficient clue.
# Otherwise the recommendation is to use Makefile.depend.${MACHINE}
# as expected below.
# Note: this file gets multiply included.
# This is what we do with DIRDEPS
# DIRDEPS:
# This is a list of directories - relative to SRCTOP, it is
# normally only of interest to .MAKE.LEVEL 0.
# In some cases the entry may be qualified with a .<machine>
# or .<target_spec> suffix (see TARGET_SPEC_VARS below),
# for example to force building something for the pseudo
# machines "host" or "common" regardless of current ${MACHINE}.
#
# All unqualified entries end up being qualified with .${TARGET_SPEC}
# and partially qualified (if TARGET_SPEC_VARS has multiple
# entries) are also expanded to a full .<target_spec>.
# The _DIRDEP_USE target uses the suffix to set TARGET_SPEC
# correctly when visiting each entry.
#
# The fully qualified directory entries are used to construct a
# dependency graph that will drive the build later.
#
# Also, for each fully qualified directory target, we will search
# using ${.MAKE.DEPENDFILE_PREFERENCE} to find additional
# dependencies. We use Makefile.depend (default value for
# .MAKE.DEPENDFILE_PREFIX) to refer to these makefiles to
# distinguish them from others.
#
# Each Makefile.depend file sets DEP_RELDIR to be the
# the RELDIR (path relative to SRCTOP) for its directory, and
# since each Makefile.depend file includes dirdeps.mk, this
# processing is recursive and results in .MAKE.LEVEL 0 learning the
# dependencies of the tree wrt the initial directory (_DEP_RELDIR).
#
# BUILD_AT_LEVEL0
# Indicates whether .MAKE.LEVEL 0 builds anything:
# if "no" sub-makes are used to build everything,
# if "yes" sub-makes are only used to build for other machines.
# It is best to use "no", but this can require fixing some
# makefiles to not do anything at .MAKE.LEVEL 0.
#
# TARGET_SPEC_VARS
# The default value is just MACHINE, and for most environments
# this is sufficient. The _DIRDEP_USE target actually sets
# both MACHINE and TARGET_SPEC to the suffix of the current
# target so that in the general case TARGET_SPEC can be ignored.
#
# If more than MACHINE is needed then sys.mk needs to decompose
# TARGET_SPEC and set the relevant variables accordingly.
# It is important that MACHINE be included in and actually be
# the first member of TARGET_SPEC_VARS. This allows other
# variables to be considered optional, and some of the treatment
# below relies on MACHINE being the first entry.
# Note: TARGET_SPEC cannot contain any '.'s so the target
# triple used by compiler folk won't work (directly anyway).
#
# For example:
#
# # Always list MACHINE first,
# # other variables might be optional.
# TARGET_SPEC_VARS = MACHINE TARGET_OS
# .if ${TARGET_SPEC:Uno:M*,*} != ""
# _tspec := ${TARGET_SPEC:S/,/ /g}
# MACHINE := ${_tspec:[1]}
# TARGET_OS := ${_tspec:[2]}
# # etc.
# # We need to stop that TARGET_SPEC affecting any submakes
# # and deal with MACHINE=${TARGET_SPEC} in the environment.
# TARGET_SPEC =
# # export but do not track
# .export-env TARGET_SPEC
# .export ${TARGET_SPEC_VARS}
# .for v in ${TARGET_SPEC_VARS:O:u}
# .if empty($v)
# .undef $v
# .endif
# .endfor
# .endif
# # make sure we know what TARGET_SPEC is
# # as we may need it to find Makefile.depend*
# TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,}
#
# touch this at your peril
_DIRDEP_USE_LEVEL?= 0
.if ${.MAKE.LEVEL} == ${_DIRDEP_USE_LEVEL}
# only the first instance is interested in all this
# First off, we want to know what ${MACHINE} to build for.
# This can be complicated if we are using a mixture of ${MACHINE} specific
# and non-specific Makefile.depend*
.if !target(_DIRDEP_USE)
# do some setup we only need once
_CURDIR ?= ${.CURDIR}
_OBJDIR ?= ${.OBJDIR}
now_utc = ${%s:L:gmtime}
.if !defined(start_utc)
start_utc := ${now_utc}
.endif
# make sure these are empty to start with
_DEP_TARGET_SPEC =
_DIRDEP_CHECKED =
# If TARGET_SPEC_VARS is other than just MACHINE
# it should be set by sys.mk or similar by now.
# TARGET_SPEC must not contain any '.'s.
TARGET_SPEC_VARS ?= MACHINE
# this is what we started with
TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,}
# this is what we mostly use below
DEP_TARGET_SPEC = ${TARGET_SPEC_VARS:S,^,DEP_,:@v@${$v:U}@:ts,}
# make sure we have defaults
.for v in ${TARGET_SPEC_VARS}
DEP_$v ?= ${$v}
.endfor
.if ${TARGET_SPEC_VARS:[#]} > 1
# Ok, this gets more complex (putting it mildly).
# In order to stay sane, we need to ensure that all the build_dirs
# we compute below are fully qualified wrt DEP_TARGET_SPEC.
# The makefiles may only partially specify (eg. MACHINE only),
# so we need to construct a set of modifiers to fill in the gaps.
# jot 10 should output 1 2 3 .. 10
JOT ?= jot
_tspec_x := ${${JOT} ${TARGET_SPEC_VARS:[#]}:L:sh}
# this handles unqualified entries
M_dep_qual_fixes = C;(/[^/.,]+)$$;\1.$${DEP_TARGET_SPEC};
# there needs to be at least one item missing for these to make sense
.for i in ${_tspec_x:[2..-1]}
_tspec_m$i := ${TARGET_SPEC_VARS:[2..$i]:@w@[^,]+@:ts,}
_tspec_a$i := ,${TARGET_SPEC_VARS:[$i..-1]:@v@$$$${DEP_$v}@:ts,}
M_dep_qual_fixes += C;(\.${_tspec_m$i})$$;\1${_tspec_a$i};
.endfor
.else
# A harmless? default.
M_dep_qual_fixes = U
.endif
.if !defined(.MAKE.DEPENDFILE_PREFERENCE)
# .MAKE.DEPENDFILE_PREFERENCE makes the logic below neater?
# you really want this set by sys.mk or similar
.MAKE.DEPENDFILE_PREFERENCE = ${_CURDIR}/${.MAKE.DEPENDFILE:T}
.if ${.MAKE.DEPENDFILE:E} == "${TARGET_SPEC}"
.if ${TARGET_SPEC} != ${MACHINE}
.MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R}.$${MACHINE}
.endif
.MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R}
.endif
.endif
_default_dependfile := ${.MAKE.DEPENDFILE_PREFERENCE:[1]:T}
_machine_dependfiles := ${.MAKE.DEPENDFILE_PREFERENCE:T:M*${MACHINE}*}
# for machine specific dependfiles we require ${MACHINE} to be at the end
# also for the sake of sanity we require a common prefix
.if !defined(.MAKE.DEPENDFILE_PREFIX)
# knowing .MAKE.DEPENDFILE_PREFIX helps
.if !empty(_machine_dependfiles)
.MAKE.DEPENDFILE_PREFIX := ${_machine_dependfiles:[1]:T:R}
.else
.MAKE.DEPENDFILE_PREFIX := ${_default_dependfile:T}
.endif
.endif
# this is how we identify non-machine specific dependfiles
N_notmachine := ${.MAKE.DEPENDFILE_PREFERENCE:E:N*${MACHINE}*:${M_ListToSkip}}
.endif # !target(_DIRDEP_USE)
# if we were included recursively _DEP_TARGET_SPEC should be valid.
.if empty(_DEP_TARGET_SPEC)
# we may or may not have included a dependfile yet
.if defined(.INCLUDEDFROMFILE)
_last_dependfile := ${.INCLUDEDFROMFILE:M${.MAKE.DEPENDFILE_PREFIX}*}
.else
_last_dependfile := ${.MAKE.MAKEFILES:M*/${.MAKE.DEPENDFILE_PREFIX}*:[-1]}
.endif
.if ${_debug_reldir:U0}
.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _last_dependfile='${_last_dependfile}'
.endif
.if empty(_last_dependfile) || ${_last_dependfile:E:${N_notmachine}} == ""
# this is all we have to work with
DEP_MACHINE = ${TARGET_MACHINE:U${MACHINE}}
_DEP_TARGET_SPEC := ${DEP_TARGET_SPEC}
.else
_DEP_TARGET_SPEC = ${_last_dependfile:${M_dep_qual_fixes:ts:}:E}
.endif
.if !empty(_last_dependfile)
# record that we've read dependfile for this
_DIRDEP_CHECKED += ${_CURDIR}.${TARGET_SPEC}
.endif
.endif
# by now _DEP_TARGET_SPEC should be set, parse it.
.if ${TARGET_SPEC_VARS:[#]} > 1
# we need to parse DEP_MACHINE may or may not contain more info
_tspec := ${_DEP_TARGET_SPEC:S/,/ /g}
.for i in ${_tspec_x}
DEP_${TARGET_SPEC_VARS:[$i]} := ${_tspec:[$i]}
.endfor
.for v in ${TARGET_SPEC_VARS:O:u}
.if empty(DEP_$v)
.undef DEP_$v
.endif
.endfor
.else
DEP_MACHINE := ${_DEP_TARGET_SPEC}
.endif
# pickup customizations
# as below you can use !target(_DIRDEP_USE) to protect things
# which should only be done once.
.-include "local.dirdeps.mk"
# the first time we are included the _DIRDEP_USE target will not be defined
# we can use this as a clue to do initialization and other one time things.
.if !target(_DIRDEP_USE)
# make sure this target exists
dirdeps: beforedirdeps .WAIT
beforedirdeps:
# We normally expect to be included by Makefile.depend.*
# which sets the DEP_* macros below.
DEP_RELDIR ?= ${RELDIR}
# this can cause lots of output!
# set to a set of glob expressions that might match RELDIR
DEBUG_DIRDEPS ?= no
# remember the initial value of DEP_RELDIR - we test for it below.
_DEP_RELDIR := ${DEP_RELDIR}
# things we skip for host tools
SKIP_HOSTDIR ?=
NSkipHostDir = ${SKIP_HOSTDIR:N*.host*:S,$,.host*,:N.host*:S,^,${SRCTOP}/,:${M_ListToSkip}}
# things we always skip
# SKIP_DIRDEPS allows for adding entries on command line.
SKIP_DIR += .host *.WAIT ${SKIP_DIRDEPS}
SKIP_DIR.host += ${SKIP_HOSTDIR}
DEP_SKIP_DIR = ${SKIP_DIR} \
${SKIP_DIR.${DEP_TARGET_SPEC}:U} \
${SKIP_DIR.${DEP_MACHINE}:U} \
${SKIP_DIRDEPS.${DEP_MACHINE}:U}
NSkipDir = ${DEP_SKIP_DIR:${M_ListToSkip}}
.if defined(NO_DIRDEPS) || defined(NODIRDEPS) || defined(WITHOUT_DIRDEPS)
# confine ourselves to the original dir
DIRDEPS_FILTER += M${_DEP_RELDIR}*
.endif
# this is what we run below
DIRDEP_MAKE?= ${.MAKE}
# we suppress SUBDIR when visiting the leaves
# we assume sys.mk will set MACHINE_ARCH
# you can add extras to DIRDEP_USE_ENV
# if there is no makefile in the target directory, we skip it.
_DIRDEP_USE: .USE .MAKE
@for m in ${.MAKE.MAKEFILE_PREFERENCE}; do \
test -s ${.TARGET:R}/$$m || continue; \
echo "${TRACER}Checking ${.TARGET:R} for ${.TARGET:E} ..."; \
MACHINE_ARCH= NO_SUBDIR=1 ${DIRDEP_USE_ENV} \
TARGET_SPEC=${.TARGET:E} \
MACHINE=${.TARGET:E} \
${DIRDEP_MAKE} -C ${.TARGET:R} || exit 1; \
break; \
done
.ifdef ALL_MACHINES
# this is how you limit it to only the machines we have been built for
# previously.
.if empty(ONLY_MACHINE_LIST)
.if !empty(ALL_MACHINE_LIST)
# ALL_MACHINE_LIST is the list of all legal machines - ignore anything else
_machine_list != cd ${_CURDIR} && 'ls' -1 ${ALL_MACHINE_LIST:O:u:@m@${.MAKE.DEPENDFILE:T:R}.$m@} 2> /dev/null; echo
.else
_machine_list != 'ls' -1 ${_CURDIR}/${.MAKE.DEPENDFILE_PREFIX}.* 2> /dev/null; echo
.endif
_only_machines := ${_machine_list:${NIgnoreFiles:UN*.bak}:E:O:u}
.else
_only_machines := ${ONLY_MACHINE_LIST}
.endif
.if empty(_only_machines)
# we must be boot-strapping
_only_machines := ${TARGET_MACHINE:U${ALL_MACHINE_LIST:U${DEP_MACHINE}}}
.endif
.else # ! ALL_MACHINES
# if ONLY_MACHINE_LIST is set, we are limited to that
# if TARGET_MACHINE is set - it is really the same as ONLY_MACHINE_LIST
# otherwise DEP_MACHINE is it - so DEP_MACHINE will match.
_only_machines := ${ONLY_MACHINE_LIST:U${TARGET_MACHINE:U${DEP_MACHINE}}:M${DEP_MACHINE}}
.endif
.if !empty(NOT_MACHINE_LIST)
_only_machines := ${_only_machines:${NOT_MACHINE_LIST:${M_ListToSkip}}}
.endif
# make sure we have a starting place?
DIRDEPS ?= ${RELDIR}
.endif # target
# if repeatedly building the same target,
# we can avoid the overhead of re-computing the tree dependencies.
MK_DIRDEPS_CACHE ?= no
BUILD_DIRDEPS_CACHE ?= no
BUILD_DIRDEPS ?= yes
.if !defined(NO_DIRDEPS)
.if ${MK_DIRDEPS_CACHE} == "yes"
# this is where we will cache all our work
DIRDEPS_CACHE?= ${_OBJDIR}/dirdeps.cache${.TARGETS:Nall:O:u:ts-:S,/,_,g:S,^,.,:N.}
# just ensure this exists
build-dirdeps:
M_oneperline = @x@\\${.newline} $$x@
.if ${BUILD_DIRDEPS_CACHE} == "no"
.if !target(dirdeps-cached)
# we do this via sub-make
BUILD_DIRDEPS = no
dirdeps: dirdeps-cached
dirdeps-cached: ${DIRDEPS_CACHE} .MAKE
@echo "${TRACER}Using ${DIRDEPS_CACHE}"
@MAKELEVEL=${.MAKE.LEVEL} ${.MAKE} -C ${_CURDIR} -f ${DIRDEPS_CACHE} \
dirdeps MK_DIRDEPS_CACHE=no BUILD_DIRDEPS=no
# these should generally do
BUILD_DIRDEPS_MAKEFILE ?= ${MAKEFILE}
BUILD_DIRDEPS_TARGETS ?= ${.TARGETS}
# we need the .meta file to ensure we update if
# any of the Makefile.depend* changed.
# We do not want to compare the command line though.
${DIRDEPS_CACHE}: .META .NOMETA_CMP
+@{ echo '# Autogenerated - do NOT edit!'; echo; \
echo 'BUILD_DIRDEPS=no'; echo; \
echo '.include <dirdeps.mk>'; \
} > ${.TARGET}.new
+@MAKELEVEL=${.MAKE.LEVEL} DIRDEPS_CACHE=${DIRDEPS_CACHE} \
DIRDEPS="${DIRDEPS}" \
MAKEFLAGS= ${.MAKE} -C ${_CURDIR} -f ${BUILD_DIRDEPS_MAKEFILE} \
${BUILD_DIRDEPS_TARGETS} BUILD_DIRDEPS_CACHE=yes \
.MAKE.DEPENDFILE=.none \
3>&1 1>&2 | sed 's,${SRCTOP},$${SRCTOP},g' >> ${.TARGET}.new && \
mv ${.TARGET}.new ${.TARGET}
.endif
.elif !target(_count_dirdeps)
# we want to capture the dirdeps count in the cache
.END: _count_dirdeps
_count_dirdeps: .NOMETA
@echo '.info $${.newline}$${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]}' >&3
.endif
.elif !make(dirdeps) && !target(_count_dirdeps)
beforedirdeps: _count_dirdeps
_count_dirdeps: .NOMETA
@echo "${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]} seconds=`expr ${now_utc} - ${start_utc}`"
.endif
.endif
.if ${BUILD_DIRDEPS} == "yes"
.if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.${DEP_MACHINE}:L:M$x}@} != ""
_debug_reldir = 1
.else
_debug_reldir = 0
.endif
.if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.depend:L:M$x}@} != ""
_debug_search = 1
.else
_debug_search = 0
.endif
# the rest is done repeatedly for every Makefile.depend we read.
# if we are anything but the original dir we care only about the
# machine type we were included for..
.if ${DEP_RELDIR} == "."
_this_dir := ${SRCTOP}
.else
_this_dir := ${SRCTOP}/${DEP_RELDIR}
.endif
# on rare occasions, there can be a need for extra help
_dep_hack := ${_this_dir}/${.MAKE.DEPENDFILE_PREFIX}.inc
.-include "${_dep_hack}"
.if ${DEP_RELDIR} != ${_DEP_RELDIR} || ${DEP_TARGET_SPEC} != ${TARGET_SPEC}
# this should be all
_machines := ${DEP_MACHINE}
.else
# this is the machine list we actually use below
_machines := ${_only_machines}
.if defined(HOSTPROG) || ${DEP_MACHINE} == "host"
# we need to build this guy's dependencies for host as well.
_machines += host
.endif
_machines := ${_machines:O:u}
.endif
.if ${TARGET_SPEC_VARS:[#]} > 1
# we need to tweak _machines
_dm := ${DEP_MACHINE}
# apply the same filtering that we do when qualifying DIRDEPS.
# M_dep_qual_fixes expects .${MACHINE}* so add (and remove) '.'
_machines := ${_machines:@DEP_MACHINE@${DEP_TARGET_SPEC}@:S,^,.,:${M_dep_qual_fixes:ts:}:O:u:S,^.,,}
DEP_MACHINE := ${_dm}
.endif
# reset each time through
_build_dirs =
.if ${DEP_RELDIR} == ${_DEP_RELDIR}
# pickup other machines for this dir if necessary
.if ${BUILD_AT_LEVEL0:Uyes} == "no"
_build_dirs += ${_machines:@m@${_CURDIR}.$m@}
.else
_build_dirs += ${_machines:N${DEP_TARGET_SPEC}:@m@${_CURDIR}.$m@}
.if ${DEP_TARGET_SPEC} == ${TARGET_SPEC}
# pickup local dependencies now
.-include <.depend>
.endif
.endif
.endif
.if ${_debug_reldir}
.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: DIRDEPS='${DIRDEPS}'
.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _machines='${_machines}'
.endif
.if !empty(DIRDEPS)
# these we reset each time through as they can depend on DEP_MACHINE
DEP_DIRDEPS_FILTER = \
${DIRDEPS_FILTER.${DEP_TARGET_SPEC}:U} \
${DIRDEPS_FILTER.${DEP_MACHINE}:U} \
${DIRDEPS_FILTER:U}
.if empty(DEP_DIRDEPS_FILTER)
# something harmless
DEP_DIRDEPS_FILTER = U
.endif
# this is what we start with
__depdirs := ${DIRDEPS:${NSkipDir}:${DEP_DIRDEPS_FILTER:ts:}:C,//+,/,g:O:u:@d@${SRCTOP}/$d@}
# some entries may be qualified with .<machine>
# the :M*/*/*.* just tries to limit the dirs we check to likely ones.
# the ${d:E:M*/*} ensures we don't consider junos/usr.sbin/mgd
__qual_depdirs := ${__depdirs:M*/*/*.*:@d@${exists($d):?:${"${d:E:M*/*}":?:${exists(${d:R}):?$d:}}}@}
__unqual_depdirs := ${__depdirs:${__qual_depdirs:Uno:${M_ListToSkip}}}
.if ${DEP_RELDIR} == ${_DEP_RELDIR}
# if it was called out - we likely need it.
__hostdpadd := ${DPADD:U.:M${HOST_OBJTOP}/*:S,${HOST_OBJTOP}/,,:H:${NSkipDir}:${DIRDEPS_FILTER:ts:}:S,$,.host,:N.*:@d@${SRCTOP}/$d@}
__qual_depdirs += ${__hostdpadd}
.endif
.if ${_debug_reldir}
.info depdirs=${__depdirs}
.info qualified=${__qual_depdirs}
.info unqualified=${__unqual_depdirs}
.endif
# _build_dirs is what we will feed to _DIRDEP_USE
_build_dirs += \
${__qual_depdirs:M*.host:${NSkipHostDir}:N.host} \
${__qual_depdirs:N*.host} \
${_machines:Mhost*:@m@${__unqual_depdirs:@d@$d.$m@}@:${NSkipHostDir}:N.host} \
${_machines:Nhost*:@m@${__unqual_depdirs:@d@$d.$m@}@}
# qualify everything now
_build_dirs := ${_build_dirs:${M_dep_qual_fixes:ts:}:O:u}
.endif # empty DIRDEPS
# Normally if doing make -V something,
# we do not want to waste time chasing DIRDEPS
# but if we want to count the number of Makefile.depend* read, we do.
.if ${.MAKEFLAGS:M-V${_V_READ_DIRDEPS}} == ""
.if !empty(_build_dirs)
.if ${BUILD_DIRDEPS_CACHE} == "yes"
x!= { echo; echo '\# ${DEP_RELDIR}.${DEP_TARGET_SPEC}'; \
echo 'dirdeps: ${_build_dirs:${M_oneperline}}'; echo; } >&3; echo
x!= { ${_build_dirs:@x@${target($x):?:echo '$x: _DIRDEP_USE';}@} echo; } >&3; echo
.else
# this makes it all happen
dirdeps: ${_build_dirs}
.endif
${_build_dirs}: _DIRDEP_USE
.if ${_debug_reldir}
.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: needs: ${_build_dirs}
.endif
# this builds the dependency graph
.for m in ${_machines}
# it would be nice to do :N${.TARGET}
.if !empty(__qual_depdirs)
.for q in ${__qual_depdirs:${M_dep_qual_fixes:ts:}:E:O:u:N$m}
.if ${_debug_reldir} || ${DEBUG_DIRDEPS:@x@${${DEP_RELDIR}.$m:L:M$x}${${DEP_RELDIR}.$q:L:M$x}@} != ""
.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$q}
.endif
.if ${BUILD_DIRDEPS_CACHE} == "yes"
x!= { echo; echo '${_this_dir}.$m: ${_build_dirs:M*.$q:${M_oneperline}}'; echo; } >&3; echo
.else
${_this_dir}.$m: ${_build_dirs:M*.$q}
.endif
.endfor
.endif
.if ${_debug_reldir}
.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$m:N${_this_dir}.$m}
.endif
.if ${BUILD_DIRDEPS_CACHE} == "yes"
x!= { echo; echo '${_this_dir}.$m: ${_build_dirs:M*.$m:N${_this_dir}.$m:${M_oneperline}}'; echo; } >&3; echo
.else
${_this_dir}.$m: ${_build_dirs:M*.$m:N${_this_dir}.$m}
.endif
.endfor
.endif
# Now find more dependencies - and recurse.
.for d in ${_build_dirs}
.if ${_DIRDEP_CHECKED:M$d} == ""
# once only
_DIRDEP_CHECKED += $d
.if ${_debug_search}
.info checking $d
.endif
# Note: _build_dirs is fully qualifed so d:R is always the directory
.if exists(${d:R})
# Warning: there is an assumption here that MACHINE is always
# the first entry in TARGET_SPEC_VARS.
# If TARGET_SPEC and MACHINE are insufficient, you have a problem.
_m := ${.MAKE.DEPENDFILE_PREFERENCE:T:S;${TARGET_SPEC}$;${d:E};:S;${MACHINE};${d:E:C/,.*//};:@m@${exists(${d:R}/$m):?${d:R}/$m:}@:[1]}
.if !empty(_m)
# M_dep_qual_fixes isn't geared to Makefile.depend
_qm := ${_m:C;(\.depend)$;\1.${d:E};:${M_dep_qual_fixes:ts:}}
.if ${_debug_search}
.info Looking for ${_qm}
.endif
# we pass _DEP_TARGET_SPEC to tell the next step what we want
_DEP_TARGET_SPEC := ${d:E}
# some makefiles may still look at this
_DEP_MACHINE := ${d:E:C/,.*//}
# set this "just in case"
# we can skip :tA since we computed the path above
DEP_RELDIR := ${_m:H:S,${SRCTOP}/,,}
# and reset this
DIRDEPS =
.if ${_debug_reldir} && ${_qm} != ${_m}
.info loading ${_m} for ${d:E}
.endif
.include <${_m}>
.endif
.endif
.endif
.endfor
.endif # -V
.endif # BUILD_DIRDEPS
.elif ${.MAKE.LEVEL} > 42
.error You should have stopped recursing by now.
.else
# we are building something
DEP_RELDIR := ${RELDIR}
_DEP_RELDIR := ${RELDIR}
# pickup local dependencies
.-include <.depend>
.endif
# bootstrapping new dependencies made easy?
.if (make(bootstrap) || make(bootstrap-recurse)) && !target(bootstrap)
.if exists(${.CURDIR}/${.MAKE.DEPENDFILE:T})
# stop here
${.TARGETS:Mboot*}:
.else
# find a Makefile.depend to use as _src
_src != cd ${.CURDIR} && for m in ${.MAKE.DEPENDFILE_PREFERENCE:T:S,${MACHINE},*,}; do test -s $$m || continue; echo $$m; break; done; echo
.if empty(_src)
.error cannot find any of ${.MAKE.DEPENDFILE_PREFERENCE:T}
.endif
_src?= ${.MAKE.DEPENDFILE:T}
bootstrap-this: .NOTMAIN
@echo Bootstrapping ${RELDIR}/${.MAKE.DEPENDFILE:T} from ${_src:T}
(cd ${.CURDIR} && sed 's,${_src:E},${MACHINE},g' ${_src} > ${.MAKE.DEPENDFILE:T})
bootstrap: bootstrap-recurse
bootstrap-recurse: bootstrap-this
_mf := ${.PARSEFILE}
bootstrap-recurse: .NOTMAIN .MAKE
@cd ${SRCTOP} && \
for d in `cd ${RELDIR} && ${.MAKE} -B -f ${"${.MAKEFLAGS:M-n}":?${_src}:${.MAKE.DEPENDFILE:T}} -V DIRDEPS`; do \
test -d $$d || d=$${d%.*}; \
test -d $$d || continue; \
echo "Checking $$d for bootstrap ..."; \
(cd $$d && ${.MAKE} -f ${_mf} bootstrap-recurse); \
done
.endif
.endif