..
ath_dfs /null
Disable strong signal diversity when enabling radar pulse detection
2012-09-02 05:01:10 +00:00
ath_hal
Don't use AR_PHY_MODE to setup half/quarter rate.
2012-09-13 18:24:13 +00:00
ath_rate
Improve the sample rate logging.
2012-08-27 20:30:07 +00:00
ah_osdep.c
Fix the HAL debugging to only use one bit to mark a message as unmaskable.
2012-07-01 02:34:32 +00:00
ah_osdep.h
Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.
2012-08-05 10:12:27 +00:00
if_ath_ahb.c
Flesh out a new DMA map for the EDMA TX completion status, as well
2012-07-23 02:49:25 +00:00
if_ath_beacon.c
Extend the beacon code slightly to support AP mode beaconing for the
2012-08-11 23:26:19 +00:00
if_ath_beacon.h
Extend the beacon code slightly to support AP mode beaconing for the
2012-08-11 23:26:19 +00:00
if_ath_debug.c
Only print the descriptor contents!
2012-08-27 23:27:41 +00:00
if_ath_debug.h
Map ATH_KTR_* to 0 when ATH_DEBUG is not defined. This effectively NOPs
2012-07-11 12:10:13 +00:00
if_ath_keycache.c
Add a 'vap' to ath_keyset().
2011-11-08 19:25:52 +00:00
if_ath_keycache.h
Add a 'vap' to ath_keyset().
2011-11-08 19:25:52 +00:00
if_ath_led.c
Bring over the initial 802.11n bluetooth coexistence support code.
2012-06-26 22:16:53 +00:00
if_ath_led.h
Refactor out the software LED config code into a common function, called
2011-12-26 05:46:22 +00:00
if_ath_misc.h
Break out the TX completion code into a separate function, so it can be
2012-08-14 22:32:20 +00:00
if_ath_pci.c
Flesh out a new DMA map for the EDMA TX completion status, as well
2012-07-23 02:49:25 +00:00
if_ath_rx_edma.c
Remove - not needed.
2012-08-29 00:53:58 +00:00
if_ath_rx_edma.h
Begin abstracting out the RX path in preparation for RX EDMA support.
2012-07-03 06:59:12 +00:00
if_ath_rx.c
Remove extra debugging - there's no longer any need.
2012-08-29 00:53:41 +00:00
if_ath_rx.h
Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.
2012-07-10 00:02:19 +00:00
if_ath_sysctl.c
Dump out the TX FIFO depth.
2012-08-14 22:34:22 +00:00
if_ath_sysctl.h
Break out most of the HAL related tweaks into a per-HAL instance,
2011-06-23 02:38:36 +00:00
if_ath_tdma.c
Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.
2012-05-20 02:49:42 +00:00
if_ath_tdma.h
Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.
2012-05-20 02:49:42 +00:00
if_ath_tsf.h
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].
2012-05-20 02:05:10 +00:00
if_ath_tx_edma.c
Initialise an uninitialised variable.
2012-08-21 16:44:25 +00:00
if_ath_tx_edma.h
Begin separating out the TX DMA setup in preparation for TX EDMA support.
2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c
Correctly mask out the RTS/CTS flags when forming aggregates.
2012-09-08 02:56:09 +00:00
if_ath_tx_ht.h
Introduce TX aggregation and software TX queue management
2011-11-08 22:43:13 +00:00
if_ath_tx.c
Clear the correct descriptor when going through the chained together
2012-09-11 04:11:42 +00:00
if_ath_tx.h
Revert the ath_tx_draintxq() method, and instead teach it the minimum
2012-08-12 00:46:15 +00:00
if_ath.c
Remove TDMA #define entries from if_ath.c; they now exist in if_ath_tdma.h.
2012-09-09 04:53:10 +00:00
if_athdfs.h
Change the ath_dfs_process_phy_err() method to take an mbuf rather than
2012-06-24 08:09:06 +00:00
if_athioctl.h
Placeholder ioctl for an upcoming rate control statistics API change.
2012-07-31 02:18:10 +00:00
if_athrate.h
Create an ioctl API for fetching the current rate control information.
2012-07-20 01:27:20 +00:00
if_athvar.h
Add an accessor macro for getting access to the default DFS parameters.
2012-08-24 17:37:12 +00:00
9b967f5d12