freebsd-dev/contrib/libpcap/pcap-dlpi.c

/*
 * Copyright (c) 1993, 1994, 1995, 1996, 1997
 *	The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that: (1) source code distributions
 * retain the above copyright notice and this paragraph in its entirety, (2)
 * distributions including binary code include the above copyright notice and
 * this paragraph in its entirety in the documentation or other materials
 * provided with the distribution, and (3) all advertising materials mentioning
 * features or use of this software display the following acknowledgement:
 * ``This product includes software developed by the University of California,
 * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
 * the University nor the names of its contributors may be used to endorse
 * or promote products derived from this software without specific prior
 * written permission.
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 *
 * This code contributed by Atanu Ghosh (atanu@cs.ucl.ac.uk),
 * University College London, and subsequently modified by
 * Guy Harris (guy@alum.mit.edu), Mark Pizzolato
 * <List-tcpdump-workers@subscriptions.pizzolato.net>,
 * and Mark C. Brown (mbrown@hp.com).
 */

/*
 * Packet capture routine for DLPI under SunOS 5, HP-UX 9/10/11, and AIX.
 *
 * Notes:
 *
 *    - The DLIOCRAW ioctl() is specific to SunOS.
 *
 *    - There is a bug in bufmod(7) such that setting the snapshot
 *      length results in data being left of the front of the packet.
 *
 *    - It might be desirable to use pfmod(7) to filter packets in the
 *      kernel when possible.
 *
 *    - An older version of the HP-UX DLPI Programmer's Guide, which
 *      I think was advertised as the 10.20 version, used to be available
 *      at
 *
 *            http://docs.hp.com/hpux/onlinedocs/B2355-90093/B2355-90093.html
 *
 *      but is no longer available; it can still be found at
 *
 *            http://h21007.www2.hp.com/dspp/files/unprotected/Drivers/Docs/Refs/B2355-90093.pdf
 *
 *      in PDF form.
 *
 *    - The HP-UX 10.x, 11.0, and 11i v1.6 version of the HP-UX DLPI
 *      Programmer's Guide, which I think was once advertised as the
 *      11.00 version is available at
 *
 *            http://docs.hp.com/en/B2355-90139/index.html
 *
 *    - The HP-UX 11i v2 version of the HP-UX DLPI Programmer's Guide
 *      is available at
 *
 *            http://docs.hp.com/en/B2355-90871/index.html
 *
 *    - All of the HP documents describe raw-mode services, which are
 *      what we use if DL_HP_RAWDLS is defined.  XXX - we use __hpux
 *      in some places to test for HP-UX, but use DL_HP_RAWDLS in
 *      other places; do we support any versions of HP-UX without
 *      DL_HP_RAWDLS?
 */

#ifndef lint
static const char rcsid[] _U_ =
    "@(#) $Header: /tcpdump/master/libpcap/pcap-dlpi.c,v 1.108.2.5 2005/05/03 18:54:35 guy Exp $ (LBL)";
#endif

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <sys/types.h>
#include <sys/time.h>
#ifdef HAVE_SYS_BUFMOD_H
#include <sys/bufmod.h>
#endif
#include <sys/dlpi.h>
#ifdef HAVE_SYS_DLPI_EXT_H
#include <sys/dlpi_ext.h>
#endif
#ifdef HAVE_HPUX9
#include <sys/socket.h>
#endif
#ifdef DL_HP_PPA_REQ
#include <sys/stat.h>
#endif
#include <sys/stream.h>
#if defined(HAVE_SOLARIS) && defined(HAVE_SYS_BUFMOD_H)
#include <sys/systeminfo.h>
#endif

#ifdef HAVE_HPUX9
#include <net/if.h>
#endif

#include <ctype.h>
#ifdef HAVE_HPUX9
#include <nlist.h>
#endif
#include <errno.h>
#include <fcntl.h>
#include <memory.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stropts.h>
#include <unistd.h>

#ifdef HAVE_LIMITS_H
#include <limits.h>
#else
#define INT_MAX		2147483647
#endif

#include "pcap-int.h"

#ifdef HAVE_OS_PROTO_H
#include "os-proto.h"
#endif

#ifndef PCAP_DEV_PREFIX
#ifdef _AIX
#define PCAP_DEV_PREFIX "/dev/dlpi"
#else
#define PCAP_DEV_PREFIX "/dev"
#endif
#endif

#define	MAXDLBUF	8192

#ifdef HAVE_SYS_BUFMOD_H

/*
 * Size of a bufmod chunk to pass upstream; that appears to be the biggest
 * value to which you can set it, and setting it to that value (which
 * is bigger than what appears to be the Solaris default of 8192)
 * reduces the number of packet drops.
 */
#define CHUNKSIZE	65536

/*
 * Size of the buffer to allocate for packet data we read; it must be
 * large enough to hold a chunk.
 */
#define PKTBUFSIZE	CHUNKSIZE

#else /* HAVE_SYS_BUFMOD_H */

/*
 * Size of the buffer to allocate for packet data we read; this is
 * what the value used to be - there's no particular reason why it
 * should be tied to MAXDLBUF, but we'll leave it as this for now.
 */
#define PKTBUFSIZE	(MAXDLBUF * sizeof(bpf_u_int32))

#endif

/* Forwards */
static char *split_dname(char *, int *, char *);
static int dl_doattach(int, int, char *);
#ifdef DL_HP_RAWDLS
static int dl_dohpuxbind(int, char *);
#endif
static int dlattachreq(int, bpf_u_int32, char *);
static int dlbindreq(int, bpf_u_int32, char *);
static int dlbindack(int, char *, char *, int *);
static int dlpromisconreq(int, bpf_u_int32, char *);
static int dlokack(int, const char *, char *, char *);
static int dlinforeq(int, char *);
static int dlinfoack(int, char *, char *);
#ifdef DL_HP_RAWDLS
static int dlrawdatareq(int, const u_char *, int);
#endif
static int recv_ack(int, int, const char *, char *, char *, int *);
static char *dlstrerror(bpf_u_int32);
static char *dlprim(bpf_u_int32);
#if defined(HAVE_SOLARIS) && defined(HAVE_SYS_BUFMOD_H)
static char *get_release(bpf_u_int32 *, bpf_u_int32 *, bpf_u_int32 *);
#endif
static int send_request(int, char *, int, char *, char *);
#ifdef HAVE_SYS_BUFMOD_H
static int strioctl(int, int, int, char *);
#endif
#ifdef HAVE_HPUX9
static int dlpi_kread(int, off_t, void *, u_int, char *);
#endif
#ifdef HAVE_DEV_DLPI
static int get_dlpi_ppa(int, const char *, int, char *);
#endif

static int
pcap_stats_dlpi(pcap_t *p, struct pcap_stat *ps)
{

	/*
	 * "ps_recv" counts packets handed to the filter, not packets
	 * that passed the filter.  As filtering is done in userland,
	 * this would not include packets dropped because we ran out
	 * of buffer space; in order to make this more like other
	 * platforms (Linux 2.4 and later, BSDs with BPF), where the
	 * "packets received" count includes packets received but dropped
	 * due to running out of buffer space, and to keep from confusing
	 * applications that, for example, compute packet drop percentages,
	 * we also make it count packets dropped by "bufmod" (otherwise we
	 * might run the risk of the packet drop count being bigger than
	 * the received-packet count).
	 *
	 * "ps_drop" counts packets dropped by "bufmod" because of
	 * flow control requirements or resource exhaustion; it doesn't
	 * count packets dropped by the interface driver, or packets
	 * dropped upstream.  As filtering is done in userland, it counts
	 * packets regardless of whether they would've passed the filter.
	 *
	 * These statistics don't include packets not yet read from
	 * the kernel by libpcap, but they may include packets not
	 * yet read from libpcap by the application.
	 */
	*ps = p->md.stat;

	/*
	 * Add in the drop count, as per the above comment.
	 */
	ps->ps_recv += ps->ps_drop;
	return (0);
}

/* XXX Needed by HP-UX (at least) */
static bpf_u_int32 ctlbuf[MAXDLBUF];
static struct strbuf ctl = {
	MAXDLBUF,
	0,
	(char *)ctlbuf
};

static int
pcap_read_dlpi(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
{
	register int cc, n, caplen, origlen;
	register u_char *bp, *ep, *pk;
	register struct bpf_insn *fcode;
#ifdef HAVE_SYS_BUFMOD_H
	register struct sb_hdr *sbp;
#ifdef LBL_ALIGN
	struct sb_hdr sbhdr;
#endif
#endif
	int flags;
	struct strbuf data;
	struct pcap_pkthdr pkthdr;

	flags = 0;
	cc = p->cc;
	if (cc == 0) {
		data.buf = (char *)p->buffer + p->offset;
		data.maxlen = p->bufsize;
		data.len = 0;
		do {
			/*
			 * Has "pcap_breakloop()" been called?
			 */
			if (p->break_loop) {
				/*
				 * Yes - clear the flag that indicates
				 * that it has, and return -2 to
				 * indicate that we were told to
				 * break out of the loop.
				 */
				p->break_loop = 0;
				return (-2);
			}
			/*
			 * XXX - check for the DLPI primitive, which
			 * would be DL_HP_RAWDATA_IND on HP-UX
			 * if we're in raw mode?
			 */
			if (getmsg(p->fd, &ctl, &data, &flags) < 0) {
				/* Don't choke when we get ptraced */
				switch (errno) {

				case EINTR:
					cc = 0;
					continue;

				case EAGAIN:
					return (0);
				}
				strlcpy(p->errbuf, pcap_strerror(errno),
				    sizeof(p->errbuf));
				return (-1);
			}
			cc = data.len;
		} while (cc == 0);
		bp = p->buffer + p->offset;
	} else
		bp = p->bp;

	/* Loop through packets */
	fcode = p->fcode.bf_insns;
	ep = bp + cc;
	n = 0;
#ifdef HAVE_SYS_BUFMOD_H
	while (bp < ep) {
		/*
		 * Has "pcap_breakloop()" been called?
		 * If so, return immediately - if we haven't read any
		 * packets, clear the flag and return -2 to indicate
		 * that we were told to break out of the loop, otherwise
		 * leave the flag set, so that the *next* call will break
		 * out of the loop without having read any packets, and
		 * return the number of packets we've processed so far.
		 */
		if (p->break_loop) {
			if (n == 0) {
				p->break_loop = 0;
				return (-2);
			} else {
				p->bp = bp;
				p->cc = ep - bp;
				return (n);
			}
		}
#ifdef LBL_ALIGN
		if ((long)bp & 3) {
			sbp = &sbhdr;
			memcpy(sbp, bp, sizeof(*sbp));
		} else
#endif
			sbp = (struct sb_hdr *)bp;
		p->md.stat.ps_drop = sbp->sbh_drops;
		pk = bp + sizeof(*sbp);
		bp += sbp->sbh_totlen;
		origlen = sbp->sbh_origlen;
		caplen = sbp->sbh_msglen;
#else
		origlen = cc;
		caplen = min(p->snapshot, cc);
		pk = bp;
		bp += caplen;
#endif
		++p->md.stat.ps_recv;
		if (bpf_filter(fcode, pk, origlen, caplen)) {
#ifdef HAVE_SYS_BUFMOD_H
			pkthdr.ts.tv_sec = sbp->sbh_timestamp.tv_sec;
			pkthdr.ts.tv_usec = sbp->sbh_timestamp.tv_usec;
#else
			(void)gettimeofday(&pkthdr.ts, NULL);
#endif
			pkthdr.len = origlen;
			pkthdr.caplen = caplen;
			/* Insure caplen does not exceed snapshot */
			if (pkthdr.caplen > p->snapshot)
				pkthdr.caplen = p->snapshot;
			(*callback)(user, &pkthdr, pk);
			if (++n >= cnt && cnt >= 0) {
				p->cc = ep - bp;
				p->bp = bp;
				return (n);
			}
		}
#ifdef HAVE_SYS_BUFMOD_H
	}
#endif
	p->cc = 0;
	return (n);
}

static int
pcap_inject_dlpi(pcap_t *p, const void *buf, size_t size)
{
	int ret;

#if defined(DLIOCRAW)
	ret = write(p->fd, buf, size);
	if (ret == -1) {
		snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "send: %s",
		    pcap_strerror(errno));
		return (-1);
	}
#elif defined(DL_HP_RAWDLS)
	if (p->send_fd < 0) {
		snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
		    "send: Output FD couldn't be opened");
		return (-1);
	}
	ret = dlrawdatareq(p->send_fd, buf, size);
	if (ret == -1) {
		snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "send: %s",
		    pcap_strerror(errno));
		return (-1);
	}
#else /* no raw mode */
	/*
	 * XXX - this is a pain, because you might have to extract
	 * the address from the packet and use it in a DL_UNITDATA_REQ
	 * request.  That would be dependent on the link-layer type.
	 *
	 * I also don't know what SAP you'd have to bind the descriptor
	 * to, or whether you'd need separate "receive" and "send" FDs,
	 * nor do I know whether you'd need different bindings for
	 * D/I/X Ethernet and 802.3, or for {FDDI,Token Ring} plus
	 * 802.2 and {FDDI,Token Ring} plus 802.2 plus SNAP.
	 *
	 * So, for now, we just return a "you can't send" indication,
	 * and leave it up to somebody with a DLPI-based system lacking
	 * both DLIOCRAW and DL_HP_RAWDLS to supply code to implement
	 * packet transmission on that system.  If they do, they should
	 * send it to us - but should not send us code that assumes
	 * Ethernet; if the code doesn't work on non-Ethernet interfaces,
	 * it should check "p->linktype" and reject the send request if
	 * it's anything other than DLT_EN10MB.
	 */
	strlcpy(p->errbuf, "send: Not supported on this version of this OS",
	    PCAP_ERRBUF_SIZE);
	ret = -1;
#endif /* raw mode */
	return (ret);
}   

#ifndef DL_IPATM
#define DL_IPATM	0x12	/* ATM Classical IP interface */
#endif

#ifdef HAVE_SOLARIS
/*
 * For SunATM.
 */
#ifndef A_GET_UNITS
#define A_GET_UNITS	(('A'<<8)|118)
#endif /* A_GET_UNITS */
#ifndef A_PROMISCON_REQ
#define A_PROMISCON_REQ	(('A'<<8)|121)
#endif /* A_PROMISCON_REQ */
#endif /* HAVE_SOLARIS */

static void
pcap_close_dlpi(pcap_t *p)
{
	pcap_close_common(p);
	if (p->send_fd >= 0)
		close(p->send_fd);
}

pcap_t *
pcap_open_live(const char *device, int snaplen, int promisc, int to_ms,
    char *ebuf)
{
	register char *cp;
	register pcap_t *p;
	int ppa;
#ifdef HAVE_SOLARIS
	int isatm = 0;
#endif
	register dl_info_ack_t *infop;
#ifdef HAVE_SYS_BUFMOD_H
	bpf_u_int32 ss, chunksize;
#ifdef HAVE_SOLARIS
	register char *release;
	bpf_u_int32 osmajor, osminor, osmicro;
#endif
#endif
	bpf_u_int32 buf[MAXDLBUF];
	char dname[100];
#ifndef HAVE_DEV_DLPI
	char dname2[100];
#endif

	p = (pcap_t *)malloc(sizeof(*p));
	if (p == NULL) {
		strlcpy(ebuf, pcap_strerror(errno), PCAP_ERRBUF_SIZE);
		return (NULL);
	}
	memset(p, 0, sizeof(*p));
	p->fd = -1;	/* indicate that it hasn't been opened yet */
	p->send_fd = -1;

#ifdef HAVE_DEV_DLPI
	/*
	** Remove any "/dev/" on the front of the device.
	*/
	cp = strrchr(device, '/');
	if (cp == NULL)
		strlcpy(dname, device, sizeof(dname));
	else
		strlcpy(dname, cp + 1, sizeof(dname));

	/*
	 * Split the device name into a device type name and a unit number;
	 * chop off the unit number, so "dname" is just a device type name.
	 */
	cp = split_dname(dname, &ppa, ebuf);
	if (cp == NULL)
		goto bad;
	*cp = '\0';

	/*
	 * Use "/dev/dlpi" as the device.
	 *
	 * XXX - HP's DLPI Programmer's Guide for HP-UX 11.00 says that
	 * the "dl_mjr_num" field is for the "major number of interface
	 * driver"; that's the major of "/dev/dlpi" on the system on
	 * which I tried this, but there may be DLPI devices that
	 * use a different driver, in which case we may need to
	 * search "/dev" for the appropriate device with that major
	 * device number, rather than hardwiring "/dev/dlpi".
	 */
	cp = "/dev/dlpi";
	if ((p->fd = open(cp, O_RDWR)) < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "%s: %s", cp, pcap_strerror(errno));
		goto bad;
	}

#ifdef DL_HP_RAWDLS
	/*
	 * XXX - HP-UX 10.20 and 11.xx don't appear to support sending and
	 * receiving packets on the same descriptor - you need separate
	 * descriptors for sending and receiving, bound to different SAPs.
	 *
	 * If the open fails, we just leave -1 in "p->send_fd" and reject
	 * attempts to send packets, just as if, in pcap-bpf.c, we fail
	 * to open the BPF device for reading and writing, we just try
	 * to open it for reading only and, if that succeeds, just let
	 * the send attempts fail.
	 */
	p->send_fd = open(cp, O_RDWR);
#endif

	/*
	 * Get a table of all PPAs for that device, and search that
	 * table for the specified device type name and unit number.
	 */
	ppa = get_dlpi_ppa(p->fd, dname, ppa, ebuf);
	if (ppa < 0)
		goto bad;
#else
	/*
	 * If the device name begins with "/", assume it begins with
	 * the pathname of the directory containing the device to open;
	 * otherwise, concatenate the device directory name and the
	 * device name.
	 */
	if (*device == '/')
		strlcpy(dname, device, sizeof(dname));
	else
		snprintf(dname, sizeof(dname), "%s/%s", PCAP_DEV_PREFIX,
		    device);

	/*
	 * Get the unit number, and a pointer to the end of the device
	 * type name.
	 */
	cp = split_dname(dname, &ppa, ebuf);
	if (cp == NULL)
		goto bad;

	/*
	 * Make a copy of the device pathname, and then remove the unit
	 * number from the device pathname.
	 */
	strlcpy(dname2, dname, sizeof(dname));
	*cp = '\0';

	/* Try device without unit number */
	if ((p->fd = open(dname, O_RDWR)) < 0) {
		if (errno != ENOENT) {
			snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s: %s", dname,
			    pcap_strerror(errno));
			goto bad;
		}

		/* Try again with unit number */
		if ((p->fd = open(dname2, O_RDWR)) < 0) {
			if (errno == ENOENT) {
				/*
				 * We just report "No DLPI device found"
				 * with the device name, so people don't
				 * get confused and think, for example,
				 * that if they can't capture on "lo0"
				 * on Solaris the fix is to change libpcap
				 * (or the application that uses it) to
				 * look for something other than "/dev/lo0",
				 * as the fix is to look for an operating
				 * system other than Solaris - you just
				 * *can't* capture on a loopback interface
				 * on Solaris, the lack of a DLPI device
				 * for the loopback interface is just a
				 * symptom of that inability.
				 */
				snprintf(ebuf, PCAP_ERRBUF_SIZE,
				    "%s: No DLPI device found", device);
			} else {
				snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s: %s",
				    dname2, pcap_strerror(errno));
			}
			goto bad;
		}
		/* XXX Assume unit zero */
		ppa = 0;
	}
#endif

	p->snapshot = snaplen;

	/*
	** Attach if "style 2" provider
	*/
	if (dlinforeq(p->fd, ebuf) < 0 ||
	    dlinfoack(p->fd, (char *)buf, ebuf) < 0)
		goto bad;
	infop = &((union DL_primitives *)buf)->info_ack;
#ifdef HAVE_SOLARIS
	if (infop->dl_mac_type == DL_IPATM)
		isatm = 1;
#endif
	if (infop->dl_provider_style == DL_STYLE2) {
		if (dl_doattach(p->fd, ppa, ebuf) < 0)
			goto bad;
#ifdef DL_HP_RAWDLS
		if (p->send_fd >= 0) {
			if (dl_doattach(p->send_fd, ppa, ebuf) < 0)
				goto bad;
		}
#endif
	}

	/*
	** Bind (defer if using HP-UX 9 or HP-UX 10.20 or later, totally
	** skip if using SINIX)
	*/
#if !defined(HAVE_HPUX9) && !defined(HAVE_HPUX10_20_OR_LATER) && !defined(sinix)
#ifdef _AIX
	/*
	** AIX.
	** According to IBM's AIX Support Line, the dl_sap value
	** should not be less than 0x600 (1536) for standard Ethernet.
	** However, we seem to get DL_BADADDR - "DLSAP addr in improper
	** format or invalid" - errors if we use 1537 on the "tr0"
	** device, which, given that its name starts with "tr" and that
	** it's IBM, probably means a Token Ring device.  (Perhaps we
	** need to use 1537 on "/dev/dlpi/en" because that device is for
	** D/I/X Ethernet, the "SAP" is actually an Ethernet type, and
	** it rejects invalid Ethernet types.)
	**
	** So if 1537 fails, we try 2, as Hyung Sik Yoon of IBM Korea
	** says that works on Token Ring (he says that 0 does *not*
	** work; perhaps that's considered an invalid LLC SAP value - I
	** assume the SAP value in a DLPI bind is an LLC SAP for network
	** types that use 802.2 LLC).
	*/
	if ((dlbindreq(p->fd, 1537, ebuf) < 0 &&
	     dlbindreq(p->fd, 2, ebuf) < 0) ||
	     dlbindack(p->fd, (char *)buf, ebuf, NULL) < 0)
		goto bad;
#elif defined(DL_HP_RAWDLS)
	/*
	** HP-UX 10.0x and 10.1x.
	*/
	if (dl_dohpuxbind(p->fd, ebuf) < 0)
		goto bad;
	if (p->send_fd >= 0) {
		/*
		** XXX - if this fails, just close send_fd and
		** set it to -1, so that you can't send but can
		** still receive?
		*/
		if (dl_dohpuxbind(p->send_fd, ebuf) < 0)
			goto bad;
	}
#else /* neither AIX nor HP-UX */
	/*
	** Not Sinix, and neither AIX nor HP-UX - Solaris, and any other
	** OS using DLPI.
	**/
	if (dlbindreq(p->fd, 0, ebuf) < 0 ||
	    dlbindack(p->fd, (char *)buf, ebuf, NULL) < 0)
		goto bad;
#endif /* AIX vs. HP-UX vs. other */
#endif /* !HP-UX 9 and !HP-UX 10.20 or later and !SINIX */

#ifdef HAVE_SOLARIS
	if (isatm) {
		/*
		** Have to turn on some special ATM promiscuous mode
		** for SunATM.
		** Do *NOT* turn regular promiscuous mode on; it doesn't
		** help, and may break things.
		*/
		if (strioctl(p->fd, A_PROMISCON_REQ, 0, NULL) < 0) {
			snprintf(ebuf, PCAP_ERRBUF_SIZE, "A_PROMISCON_REQ: %s",
			    pcap_strerror(errno));
			goto bad;
		}
	} else
#endif
	if (promisc) {
		/*
		** Enable promiscuous (not necessary on send FD)
		*/
		if (dlpromisconreq(p->fd, DL_PROMISC_PHYS, ebuf) < 0 ||
		    dlokack(p->fd, "promisc_phys", (char *)buf, ebuf) < 0)
			goto bad;

		/*
		** Try to enable multicast (you would have thought
		** promiscuous would be sufficient). (Skip if using
		** HP-UX or SINIX) (Not necessary on send FD)
		*/
#if !defined(__hpux) && !defined(sinix)
		if (dlpromisconreq(p->fd, DL_PROMISC_MULTI, ebuf) < 0 ||
		    dlokack(p->fd, "promisc_multi", (char *)buf, ebuf) < 0)
			fprintf(stderr,
			    "WARNING: DL_PROMISC_MULTI failed (%s)\n", ebuf);
#endif
	}
	/*
	** Try to enable SAP promiscuity (when not in promiscuous mode
	** when using HP-UX, when not doing SunATM on Solaris, and never
	** under SINIX) (Not necessary on send FD)
	*/
#ifndef sinix
	if (
#ifdef __hpux
	    !promisc &&
#endif
#ifdef HAVE_SOLARIS
	    !isatm &&
#endif
	    (dlpromisconreq(p->fd, DL_PROMISC_SAP, ebuf) < 0 ||
	    dlokack(p->fd, "promisc_sap", (char *)buf, ebuf) < 0)) {
		/* Not fatal if promisc since the DL_PROMISC_PHYS worked */
		if (promisc)
			fprintf(stderr,
			    "WARNING: DL_PROMISC_SAP failed (%s)\n", ebuf);
		else
			goto bad;
	}
#endif /* sinix */

	/*
	** HP-UX 9, and HP-UX 10.20 or later, must bind after setting
	** promiscuous options.
	*/
#if defined(HAVE_HPUX9) || defined(HAVE_HPUX10_20_OR_LATER)
	if (dl_dohpuxbind(p->fd, ebuf) < 0)
		goto bad;
	/*
	** We don't set promiscuous mode on the send FD, but we'll defer
	** binding it anyway, just to keep the HP-UX 9/10.20 or later
	** code together.
	*/
	if (p->send_fd >= 0) {
		/*
		** XXX - if this fails, just close send_fd and
		** set it to -1, so that you can't send but can
		** still receive?
		*/
		if (dl_dohpuxbind(p->send_fd, ebuf) < 0)
			goto bad;
	}
#endif

	/*
	** Determine link type
	** XXX - get SAP length and address length as well, for use
	** when sending packets.
	*/
	if (dlinforeq(p->fd, ebuf) < 0 ||
	    dlinfoack(p->fd, (char *)buf, ebuf) < 0)
		goto bad;

	infop = &((union DL_primitives *)buf)->info_ack;
	switch (infop->dl_mac_type) {

	case DL_CSMACD:
	case DL_ETHER:
		p->linktype = DLT_EN10MB;
		p->offset = 2;
		/*
		 * This is (presumably) a real Ethernet capture; give it a
		 * link-layer-type list with DLT_EN10MB and DLT_DOCSIS, so
		 * that an application can let you choose it, in case you're
		 * capturing DOCSIS traffic that a Cisco Cable Modem
		 * Termination System is putting out onto an Ethernet (it
		 * doesn't put an Ethernet header onto the wire, it puts raw
		 * DOCSIS frames out on the wire inside the low-level
		 * Ethernet framing).
		 */
		p->dlt_list = (u_int *) malloc(sizeof(u_int) * 2);
		/*
		 * If that fails, just leave the list empty.
		 */
		if (p->dlt_list != NULL) {
			p->dlt_list[0] = DLT_EN10MB;
			p->dlt_list[1] = DLT_DOCSIS;
			p->dlt_count = 2;
		}
		break;

	case DL_FDDI:
		p->linktype = DLT_FDDI;
		p->offset = 3;
		break;

	case DL_TPR:
		/*
		 * XXX - what about DL_TPB?  Is that Token Bus?
		 */	
		p->linktype = DLT_IEEE802;
		p->offset = 2;
		break;

#ifdef HAVE_SOLARIS
	case DL_IPATM:
		p->linktype = DLT_SUNATM;
		p->offset = 0;	/* works for LANE and LLC encapsulation */
		break;
#endif

	default:
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "unknown mac type %lu",
		    (unsigned long)infop->dl_mac_type);
		goto bad;
	}

#ifdef	DLIOCRAW
	/*
	** This is a non standard SunOS hack to get the full raw link-layer
	** header.
	*/
	if (strioctl(p->fd, DLIOCRAW, 0, NULL) < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "DLIOCRAW: %s",
		    pcap_strerror(errno));
		goto bad;
	}
#endif

#ifdef HAVE_SYS_BUFMOD_H
	/*
	** Another non standard call to get the data nicely buffered
	*/
	if (ioctl(p->fd, I_PUSH, "bufmod") != 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "I_PUSH bufmod: %s",
		    pcap_strerror(errno));
		goto bad;
	}

	/*
	** Now that the bufmod is pushed lets configure it.
	**
	** There is a bug in bufmod(7). When dealing with messages of
	** less than snaplen size it strips data from the beginning not
	** the end.
	**
	** This bug is supposed to be fixed in 5.3.2. Also, there is a
	** patch available. Ask for bugid 1149065.
	*/
	ss = snaplen;
#ifdef HAVE_SOLARIS
	release = get_release(&osmajor, &osminor, &osmicro);
	if (osmajor == 5 && (osminor <= 2 || (osminor == 3 && osmicro < 2)) &&
	    getenv("BUFMOD_FIXED") == NULL) {
		fprintf(stderr,
		"WARNING: bufmod is broken in SunOS %s; ignoring snaplen.\n",
		    release);
		ss = 0;
	}
#endif
	if (ss > 0 &&
	    strioctl(p->fd, SBIOCSSNAP, sizeof(ss), (char *)&ss) != 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "SBIOCSSNAP: %s",
		    pcap_strerror(errno));
		goto bad;
	}

	/*
	** Set up the bufmod timeout
	*/
	if (to_ms != 0) {
		struct timeval to;

		to.tv_sec = to_ms / 1000;
		to.tv_usec = (to_ms * 1000) % 1000000;
		if (strioctl(p->fd, SBIOCSTIME, sizeof(to), (char *)&to) != 0) {
			snprintf(ebuf, PCAP_ERRBUF_SIZE, "SBIOCSTIME: %s",
			    pcap_strerror(errno));
			goto bad;
		}
	}

	/*
	** Set the chunk length.
	*/
	chunksize = CHUNKSIZE;
	if (strioctl(p->fd, SBIOCSCHUNK, sizeof(chunksize), (char *)&chunksize)
	    != 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "SBIOCSCHUNKP: %s",
		    pcap_strerror(errno));
		goto bad;
	}
#endif

	/*
	** As the last operation flush the read side.
	*/
	if (ioctl(p->fd, I_FLUSH, FLUSHR) != 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "FLUSHR: %s",
		    pcap_strerror(errno));
		goto bad;
	}

	/* Allocate data buffer */
	p->bufsize = PKTBUFSIZE;
	p->buffer = (u_char *)malloc(p->bufsize + p->offset);
	if (p->buffer == NULL) {
		strlcpy(ebuf, pcap_strerror(errno), PCAP_ERRBUF_SIZE);
		goto bad;
	}

	/*
	 * "p->fd" is an FD for a STREAMS device, so "select()" and
	 * "poll()" should work on it.
	 */
	p->selectable_fd = p->fd;

	p->read_op = pcap_read_dlpi;
	p->inject_op = pcap_inject_dlpi;
	p->setfilter_op = install_bpf_program;	/* no kernel filtering */
	p->setdirection_op = NULL;	/* Not implemented.*/
	p->set_datalink_op = NULL;	/* can't change data link type */
	p->getnonblock_op = pcap_getnonblock_fd;
	p->setnonblock_op = pcap_setnonblock_fd;
	p->stats_op = pcap_stats_dlpi;
	p->close_op = pcap_close_dlpi;

	return (p);
bad:
	if (p->fd >= 0)
		close(p->fd);
	if (p->send_fd >= 0)
		close(p->send_fd);
	/*
	 * Get rid of any link-layer type list we allocated.
	 */
	if (p->dlt_list != NULL)
		free(p->dlt_list);
	free(p);
	return (NULL);
}

/*
 * Split a device name into a device type name and a unit number;
 * return the a pointer to the beginning of the unit number, which
 * is the end of the device type name, and set "*unitp" to the unit
 * number.
 *
 * Returns NULL on error, and fills "ebuf" with an error message.
 */
static char *
split_dname(char *device, int *unitp, char *ebuf)
{
	char *cp;
	char *eos;
	long unit;

	/*
	 * Look for a number at the end of the device name string.
	 */
	cp = device + strlen(device) - 1;
	if (*cp < '0' || *cp > '9') {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s missing unit number",
		    device);
		return (NULL);
	}

	/* Digits at end of string are unit number */
	while (cp-1 >= device && *(cp-1) >= '0' && *(cp-1) <= '9')
		cp--;

	errno = 0;
	unit = strtol(cp, &eos, 10);
	if (*eos != '\0') {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s bad unit number", device);
		return (NULL);
	}
	if (errno == ERANGE || unit > INT_MAX) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s unit number too large",
		    device);
		return (NULL);
	}
	if (unit < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s unit number is negative",
		    device);
		return (NULL);
	}
	*unitp = (int)unit;
	return (cp);
}

static int
dl_doattach(int fd, int ppa, char *ebuf)
{
	bpf_u_int32 buf[MAXDLBUF];

	if (dlattachreq(fd, ppa, ebuf) < 0 ||
	    dlokack(fd, "attach", (char *)buf, ebuf) < 0)
		return (-1);
	return (0);
}

#ifdef DL_HP_RAWDLS
static int
dl_dohpuxbind(int fd, char *ebuf)
{
	int hpsap;
	int uerror;
	bpf_u_int32 buf[MAXDLBUF];

	/*
	 * XXX - we start at 22 because we used to use only 22, but
	 * that was just because that was the value used in some
	 * sample code from HP.  With what value *should* we start?
	 * Does it matter, given that we're enabling SAP promiscuity
	 * on the input FD?
	 */
	hpsap = 22;
	for (;;) {
		if (dlbindreq(fd, hpsap, ebuf) < 0)
			return (-1);
		if (dlbindack(fd, (char *)buf, ebuf, &uerror) >= 0)
			break;
		/*
		 * For any error other than a UNIX EBUSY, give up.
		 */
		if (uerror != EBUSY)
			return (-1);

		/*
		 * For EBUSY, try the next SAP value; that means that
		 * somebody else is using that SAP.  Clear ebuf so
		 * that application doesn't report the "Device busy"
		 * error as a warning.
		 */
		*ebuf = '\0';
		hpsap++;
		if (hpsap > 100)
			return (-1);
	}
}
#endif

int
pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf)
{
#ifdef HAVE_SOLARIS
	int fd;
	union {
		u_int nunits;
		char pad[516];	/* XXX - must be at least 513; is 516
				   in "atmgetunits" */
	} buf;
	char baname[2+1+1];
	u_int i;

	/*
	 * We may have to do special magic to get ATM devices.
	 */
	if ((fd = open("/dev/ba", O_RDWR)) < 0) {
		/*
		 * We couldn't open the "ba" device.
		 * For now, just give up; perhaps we should
		 * return an error if the problem is neither
		 * a "that device doesn't exist" error (ENOENT,
		 * ENXIO, etc.) or a "you're not allowed to do
		 * that" error (EPERM, EACCES).
		 */
		return (0);
	}

	if (strioctl(fd, A_GET_UNITS, sizeof(buf), (char *)&buf) < 0) {
		snprintf(errbuf, PCAP_ERRBUF_SIZE, "A_GET_UNITS: %s",
		    pcap_strerror(errno));
		return (-1);
	}
	for (i = 0; i < buf.nunits; i++) {
		snprintf(baname, sizeof baname, "ba%u", i);
		if (pcap_add_if(alldevsp, baname, 0, NULL, errbuf) < 0)
			return (-1);
	}
#endif

	return (0);
}

static int
send_request(int fd, char *ptr, int len, char *what, char *ebuf)
{
	struct	strbuf	ctl;
	int	flags;

	ctl.maxlen = 0;
	ctl.len = len;
	ctl.buf = ptr;

	flags = 0;
	if (putmsg(fd, &ctl, (struct strbuf *) NULL, flags) < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "send_request: putmsg \"%s\": %s",
		    what, pcap_strerror(errno));
		return (-1);
	}
	return (0);
}

static int
recv_ack(int fd, int size, const char *what, char *bufp, char *ebuf, int *uerror)
{
	union	DL_primitives	*dlp;
	struct	strbuf	ctl;
	int	flags;

	ctl.maxlen = MAXDLBUF;
	ctl.len = 0;
	ctl.buf = bufp;

	flags = 0;
	if (getmsg(fd, &ctl, (struct strbuf*)NULL, &flags) < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "recv_ack: %s getmsg: %s",
		    what, pcap_strerror(errno));
		return (-1);
	}

	dlp = (union DL_primitives *) ctl.buf;
	switch (dlp->dl_primitive) {

	case DL_INFO_ACK:
	case DL_BIND_ACK:
	case DL_OK_ACK:
#ifdef DL_HP_PPA_ACK
	case DL_HP_PPA_ACK:
#endif
		/* These are OK */
		break;

	case DL_ERROR_ACK:
		switch (dlp->error_ack.dl_errno) {

		case DL_SYSERR:
			if (uerror != NULL)
				*uerror = dlp->error_ack.dl_unix_errno;
			snprintf(ebuf, PCAP_ERRBUF_SIZE,
			    "recv_ack: %s: UNIX error - %s",
			    what, pcap_strerror(dlp->error_ack.dl_unix_errno));
			break;

		default:
			if (uerror != NULL)
				*uerror = 0;
			snprintf(ebuf, PCAP_ERRBUF_SIZE, "recv_ack: %s: %s",
			    what, dlstrerror(dlp->error_ack.dl_errno));
			break;
		}
		return (-1);

	default:
		if (uerror != NULL)
			*uerror = 0;
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "recv_ack: %s: Unexpected primitive ack %s",
		    what, dlprim(dlp->dl_primitive));
		return (-1);
	}

	if (ctl.len < size) {
		if (uerror != NULL)
			*uerror = 0;
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "recv_ack: %s: Ack too small (%d < %d)",
		    what, ctl.len, size);
		return (-1);
	}
	return (ctl.len);
}

static char *
dlstrerror(bpf_u_int32 dl_errno)
{
	static char errstring[6+2+8+1];

	switch (dl_errno) {

	case DL_ACCESS:
		return ("Improper permissions for request");

	case DL_BADADDR:
		return ("DLSAP addr in improper format or invalid");

	case DL_BADCORR:
		return ("Seq number not from outstand DL_CONN_IND");

	case DL_BADDATA:
		return ("User data exceeded provider limit");

	case DL_BADPPA:
#ifdef HAVE_DEV_DLPI
		/*
		 * With a single "/dev/dlpi" device used for all
		 * DLPI providers, PPAs have nothing to do with
		 * unit numbers.
		 */
		return ("Specified PPA was invalid");
#else
		/*
		 * We have separate devices for separate devices;
		 * the PPA is just the unit number.
		 */
		return ("Specified PPA (device unit) was invalid");
#endif

	case DL_BADPRIM:
		return ("Primitive received not known by provider");

	case DL_BADQOSPARAM:
		return ("QOS parameters contained invalid values");

	case DL_BADQOSTYPE:
		return ("QOS structure type is unknown/unsupported");

	case DL_BADSAP:
		return ("Bad LSAP selector");

	case DL_BADTOKEN:
		return ("Token used not an active stream");

	case DL_BOUND:
		return ("Attempted second bind with dl_max_conind");

	case DL_INITFAILED:
		return ("Physical link initialization failed");

	case DL_NOADDR:
		return ("Provider couldn't allocate alternate address");

	case DL_NOTINIT:
		return ("Physical link not initialized");

	case DL_OUTSTATE:
		return ("Primitive issued in improper state");

	case DL_SYSERR:
		return ("UNIX system error occurred");

	case DL_UNSUPPORTED:
		return ("Requested service not supplied by provider");

	case DL_UNDELIVERABLE:
		return ("Previous data unit could not be delivered");

	case DL_NOTSUPPORTED:
		return ("Primitive is known but not supported");

	case DL_TOOMANY:
		return ("Limit exceeded");

	case DL_NOTENAB:
		return ("Promiscuous mode not enabled");

	case DL_BUSY:
		return ("Other streams for PPA in post-attached");

	case DL_NOAUTO:
		return ("Automatic handling XID&TEST not supported");

	case DL_NOXIDAUTO:
		return ("Automatic handling of XID not supported");

	case DL_NOTESTAUTO:
		return ("Automatic handling of TEST not supported");

	case DL_XIDAUTO:
		return ("Automatic handling of XID response");

	case DL_TESTAUTO:
		return ("Automatic handling of TEST response");

	case DL_PENDING:
		return ("Pending outstanding connect indications");

	default:
		sprintf(errstring, "Error %02x", dl_errno);
		return (errstring);
	}
}

static char *
dlprim(bpf_u_int32 prim)
{
	static char primbuf[80];

	switch (prim) {

	case DL_INFO_REQ:
		return ("DL_INFO_REQ");

	case DL_INFO_ACK:
		return ("DL_INFO_ACK");

	case DL_ATTACH_REQ:
		return ("DL_ATTACH_REQ");

	case DL_DETACH_REQ:
		return ("DL_DETACH_REQ");

	case DL_BIND_REQ:
		return ("DL_BIND_REQ");

	case DL_BIND_ACK:
		return ("DL_BIND_ACK");

	case DL_UNBIND_REQ:
		return ("DL_UNBIND_REQ");

	case DL_OK_ACK:
		return ("DL_OK_ACK");

	case DL_ERROR_ACK:
		return ("DL_ERROR_ACK");

	case DL_SUBS_BIND_REQ:
		return ("DL_SUBS_BIND_REQ");

	case DL_SUBS_BIND_ACK:
		return ("DL_SUBS_BIND_ACK");

	case DL_UNITDATA_REQ:
		return ("DL_UNITDATA_REQ");

	case DL_UNITDATA_IND:
		return ("DL_UNITDATA_IND");

	case DL_UDERROR_IND:
		return ("DL_UDERROR_IND");

	case DL_UDQOS_REQ:
		return ("DL_UDQOS_REQ");

	case DL_CONNECT_REQ:
		return ("DL_CONNECT_REQ");

	case DL_CONNECT_IND:
		return ("DL_CONNECT_IND");

	case DL_CONNECT_RES:
		return ("DL_CONNECT_RES");

	case DL_CONNECT_CON:
		return ("DL_CONNECT_CON");

	case DL_TOKEN_REQ:
		return ("DL_TOKEN_REQ");

	case DL_TOKEN_ACK:
		return ("DL_TOKEN_ACK");

	case DL_DISCONNECT_REQ:
		return ("DL_DISCONNECT_REQ");

	case DL_DISCONNECT_IND:
		return ("DL_DISCONNECT_IND");

	case DL_RESET_REQ:
		return ("DL_RESET_REQ");

	case DL_RESET_IND:
		return ("DL_RESET_IND");

	case DL_RESET_RES:
		return ("DL_RESET_RES");

	case DL_RESET_CON:
		return ("DL_RESET_CON");

	default:
		(void) sprintf(primbuf, "unknown primitive 0x%x", prim);
		return (primbuf);
	}
}

static int
dlattachreq(int fd, bpf_u_int32 ppa, char *ebuf)
{
	dl_attach_req_t	req;

	req.dl_primitive = DL_ATTACH_REQ;
	req.dl_ppa = ppa;

	return (send_request(fd, (char *)&req, sizeof(req), "attach", ebuf));
}

static int
dlbindreq(int fd, bpf_u_int32 sap, char *ebuf)
{

	dl_bind_req_t	req;

	memset((char *)&req, 0, sizeof(req));
	req.dl_primitive = DL_BIND_REQ;
	/* XXX - what if neither of these are defined? */
#if defined(DL_HP_RAWDLS)
	req.dl_max_conind = 1;			/* XXX magic number */
	req.dl_service_mode = DL_HP_RAWDLS;
#elif defined(DL_CLDLS)
	req.dl_service_mode = DL_CLDLS;
#endif
	req.dl_sap = sap;

	return (send_request(fd, (char *)&req, sizeof(req), "bind", ebuf));
}

static int
dlbindack(int fd, char *bufp, char *ebuf, int *uerror)
{

	return (recv_ack(fd, DL_BIND_ACK_SIZE, "bind", bufp, ebuf, uerror));
}

static int
dlpromisconreq(int fd, bpf_u_int32 level, char *ebuf)
{
	dl_promiscon_req_t req;

	req.dl_primitive = DL_PROMISCON_REQ;
	req.dl_level = level;

	return (send_request(fd, (char *)&req, sizeof(req), "promiscon", ebuf));
}

static int
dlokack(int fd, const char *what, char *bufp, char *ebuf)
{

	return (recv_ack(fd, DL_OK_ACK_SIZE, what, bufp, ebuf, NULL));
}


static int
dlinforeq(int fd, char *ebuf)
{
	dl_info_req_t req;

	req.dl_primitive = DL_INFO_REQ;

	return (send_request(fd, (char *)&req, sizeof(req), "info", ebuf));
}

static int
dlinfoack(int fd, char *bufp, char *ebuf)
{

	return (recv_ack(fd, DL_INFO_ACK_SIZE, "info", bufp, ebuf, NULL));
}

#ifdef DL_HP_RAWDLS
/*
 * There's an ack *if* there's an error.
 */
static int
dlrawdatareq(int fd, const u_char *datap, int datalen)
{
	struct strbuf ctl, data;
	long buf[MAXDLBUF];	/* XXX - char? */
	union DL_primitives *dlp;
	int dlen;

	dlp = (union DL_primitives*) buf;

	dlp->dl_primitive = DL_HP_RAWDATA_REQ;
	dlen = DL_HP_RAWDATA_REQ_SIZE;

	/*
	 * HP's documentation doesn't appear to show us supplying any
	 * address pointed to by the control part of the message.
	 * I think that's what raw mode means - you just send the raw
	 * packet, you don't specify where to send it to, as that's
	 * implied by the destination address.
	 */
	ctl.maxlen = 0;
	ctl.len = dlen;
	ctl.buf = (void *)buf;

	data.maxlen = 0;
	data.len = datalen;
	data.buf = (void *)datap;

	return (putmsg(fd, &ctl, &data, 0));
}
#endif /* DL_HP_RAWDLS */

#ifdef HAVE_SYS_BUFMOD_H
static int
strioctl(int fd, int cmd, int len, char *dp)
{
	struct strioctl str;
	int rc;

	str.ic_cmd = cmd;
	str.ic_timout = -1;
	str.ic_len = len;
	str.ic_dp = dp;
	rc = ioctl(fd, I_STR, &str);

	if (rc < 0)
		return (rc);
	else
		return (str.ic_len);
}
#endif

#if defined(HAVE_SOLARIS) && defined(HAVE_SYS_BUFMOD_H)
static char *
get_release(bpf_u_int32 *majorp, bpf_u_int32 *minorp, bpf_u_int32 *microp)
{
	char *cp;
	static char buf[32];

	*majorp = 0;
	*minorp = 0;
	*microp = 0;
	if (sysinfo(SI_RELEASE, buf, sizeof(buf)) < 0)
		return ("?");
	cp = buf;
	if (!isdigit((unsigned char)*cp))
		return (buf);
	*majorp = strtol(cp, &cp, 10);
	if (*cp++ != '.')
		return (buf);
	*minorp =  strtol(cp, &cp, 10);
	if (*cp++ != '.')
		return (buf);
	*microp =  strtol(cp, &cp, 10);
	return (buf);
}
#endif

#ifdef DL_HP_PPA_REQ
/*
 * Under HP-UX 10 and HP-UX 11, we can ask for the ppa
 */


/*
 * Determine ppa number that specifies ifname.
 *
 * If the "dl_hp_ppa_info_t" doesn't have a "dl_module_id_1" member,
 * the code that's used here is the old code for HP-UX 10.x.
 *
 * However, HP-UX 10.20, at least, appears to have such a member
 * in its "dl_hp_ppa_info_t" structure, so the new code is used.
 * The new code didn't work on an old 10.20 system on which Rick
 * Jones of HP tried it, but with later patches installed, it
 * worked - it appears that the older system had those members but
 * didn't put anything in them, so, if the search by name fails, we
 * do the old search.
 *
 * Rick suggests that making sure your system is "up on the latest
 * lancommon/DLPI/driver patches" is probably a good idea; it'd fix
 * that problem, as well as allowing libpcap to see packets sent
 * from the system on which the libpcap application is being run.
 * (On 10.20, in addition to getting the latest patches, you need
 * to turn the kernel "lanc_outbound_promisc_flag" flag on with ADB;
 * a posting to "comp.sys.hp.hpux" at
 *
 *	http://www.deja.com/[ST_rn=ps]/getdoc.xp?AN=558092266
 *
 * says that, to see the machine's outgoing traffic, you'd need to
 * apply the right patches to your system, and also set that variable
 * with:

echo 'lanc_outbound_promisc_flag/W1' | /usr/bin/adb -w /stand/vmunix /dev/kmem

 * which could be put in, for example, "/sbin/init.d/lan".
 *
 * Setting the variable is not necessary on HP-UX 11.x.
 */
static int
get_dlpi_ppa(register int fd, register const char *device, register int unit,
    register char *ebuf)
{
	register dl_hp_ppa_ack_t *ap;
	register dl_hp_ppa_info_t *ipstart, *ip;
	register int i;
	char dname[100];
	register u_long majdev;
	struct stat statbuf;
	dl_hp_ppa_req_t	req;
	char buf[MAXDLBUF];
	char *ppa_data_buf;
	dl_hp_ppa_ack_t	*dlp;
	struct strbuf ctl;
	int flags;
	int ppa;

	memset((char *)&req, 0, sizeof(req));
	req.dl_primitive = DL_HP_PPA_REQ;

	memset((char *)buf, 0, sizeof(buf));
	if (send_request(fd, (char *)&req, sizeof(req), "hpppa", ebuf) < 0)
		return (-1);

	ctl.maxlen = DL_HP_PPA_ACK_SIZE;
	ctl.len = 0;
	ctl.buf = (char *)buf;

	flags = 0;
	/*
	 * DLPI may return a big chunk of data for a DL_HP_PPA_REQ. The normal
	 * recv_ack will fail because it set the maxlen to MAXDLBUF (8192)
	 * which is NOT big enough for a DL_HP_PPA_REQ.
	 *
	 * This causes libpcap applications to fail on a system with HP-APA
	 * installed.
	 *
	 * To figure out how big the returned data is, we first call getmsg
	 * to get the small head and peek at the head to get the actual data
	 * length, and  then issue another getmsg to get the actual PPA data.
	 */
	/* get the head first */
	if (getmsg(fd, &ctl, (struct strbuf *)NULL, &flags) < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "get_dlpi_ppa: hpppa getmsg: %s", pcap_strerror(errno));
		return (-1);
	}

	dlp = (dl_hp_ppa_ack_t *)ctl.buf;
	if (dlp->dl_primitive != DL_HP_PPA_ACK) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "get_dlpi_ppa: hpppa unexpected primitive ack 0x%x",
		    (bpf_u_int32)dlp->dl_primitive);
		return (-1);
	}

	if (ctl.len < DL_HP_PPA_ACK_SIZE) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "get_dlpi_ppa: hpppa ack too small (%d < %lu)",
		     ctl.len, (unsigned long)DL_HP_PPA_ACK_SIZE);
		return (-1);
	}

	/* allocate buffer */
	if ((ppa_data_buf = (char *)malloc(dlp->dl_length)) == NULL) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "get_dlpi_ppa: hpppa malloc: %s", pcap_strerror(errno));
		return (-1);
	}
	ctl.maxlen = dlp->dl_length;
	ctl.len = 0;
	ctl.buf = (char *)ppa_data_buf;
	/* get the data */
	if (getmsg(fd, &ctl, (struct strbuf *)NULL, &flags) < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "get_dlpi_ppa: hpppa getmsg: %s", pcap_strerror(errno));
		free(ppa_data_buf);
		return (-1);
	}
	if (ctl.len < dlp->dl_length) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "get_dlpi_ppa: hpppa ack too small (%d < %d)",
		    ctl.len, dlp->dl_length);
		free(ppa_data_buf);
		return (-1);
	}

	ap = (dl_hp_ppa_ack_t *)buf;
	ipstart = (dl_hp_ppa_info_t *)ppa_data_buf;
	ip = ipstart;

#ifdef HAVE_HP_PPA_INFO_T_DL_MODULE_ID_1
	/*
	 * The "dl_hp_ppa_info_t" structure has a "dl_module_id_1"
	 * member that should, in theory, contain the part of the
	 * name for the device that comes before the unit number,
	 * and should also have a "dl_module_id_2" member that may
	 * contain an alternate name (e.g., I think Ethernet devices
	 * have both "lan", for "lanN", and "snap", for "snapN", with
	 * the former being for Ethernet packets and the latter being
	 * for 802.3/802.2 packets).
	 *
	 * Search for the device that has the specified name and
	 * instance number.
	 */
	for (i = 0; i < ap->dl_count; i++) {
		if ((strcmp((const char *)ip->dl_module_id_1, device) == 0 ||
		     strcmp((const char *)ip->dl_module_id_2, device) == 0) &&
		    ip->dl_instance_num == unit)
			break;

		ip = (dl_hp_ppa_info_t *)((u_char *)ipstart + ip->dl_next_offset);
	}
#else
	/*
	 * We don't have that member, so the search is impossible; make it
	 * look as if the search failed.
	 */
	i = ap->dl_count;
#endif

	if (i == ap->dl_count) {
		/*
		 * Well, we didn't, or can't, find the device by name.
		 *
		 * HP-UX 10.20, whilst it has "dl_module_id_1" and
		 * "dl_module_id_2" fields in the "dl_hp_ppa_info_t",
		 * doesn't seem to fill them in unless the system is
		 * at a reasonably up-to-date patch level.
		 *
		 * Older HP-UX 10.x systems might not have those fields
		 * at all.
		 *
		 * Therefore, we'll search for the entry with the major
		 * device number of a device with the name "/dev/<dev><unit>",
		 * if such a device exists, as the old code did.
		 */
		snprintf(dname, sizeof(dname), "/dev/%s%d", device, unit);
		if (stat(dname, &statbuf) < 0) {
			snprintf(ebuf, PCAP_ERRBUF_SIZE, "stat: %s: %s",
			    dname, pcap_strerror(errno));
			return (-1);
		}
		majdev = major(statbuf.st_rdev);

		ip = ipstart;

		for (i = 0; i < ap->dl_count; i++) {
			if (ip->dl_mjr_num == majdev &&
			    ip->dl_instance_num == unit)
				break;

			ip = (dl_hp_ppa_info_t *)((u_char *)ipstart + ip->dl_next_offset);
		}
	}
	if (i == ap->dl_count) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "can't find /dev/dlpi PPA for %s%d", device, unit);
		return (-1);
	}
	if (ip->dl_hdw_state == HDW_DEAD) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "%s%d: hardware state: DOWN\n", device, unit);
		free(ppa_data_buf);
		return (-1);
	}
	ppa = ip->dl_ppa;
	free(ppa_data_buf);
	return (ppa);
}
#endif

#ifdef HAVE_HPUX9
/*
 * Under HP-UX 9, there is no good way to determine the ppa.
 * So punt and read it from /dev/kmem.
 */
static struct nlist nl[] = {
#define NL_IFNET 0
	{ "ifnet" },
	{ "" }
};

static char path_vmunix[] = "/hp-ux";

/* Determine ppa number that specifies ifname */
static int
get_dlpi_ppa(register int fd, register const char *ifname, register int unit,
    register char *ebuf)
{
	register const char *cp;
	register int kd;
	void *addr;
	struct ifnet ifnet;
	char if_name[sizeof(ifnet.if_name) + 1];

	cp = strrchr(ifname, '/');
	if (cp != NULL)
		ifname = cp + 1;
	if (nlist(path_vmunix, &nl) < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "nlist %s failed",
		    path_vmunix);
		return (-1);
	}
	if (nl[NL_IFNET].n_value == 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE,
		    "could't find %s kernel symbol",
		    nl[NL_IFNET].n_name);
		return (-1);
	}
	kd = open("/dev/kmem", O_RDONLY);
	if (kd < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "kmem open: %s",
		    pcap_strerror(errno));
		return (-1);
	}
	if (dlpi_kread(kd, nl[NL_IFNET].n_value,
	    &addr, sizeof(addr), ebuf) < 0) {
		close(kd);
		return (-1);
	}
	for (; addr != NULL; addr = ifnet.if_next) {
		if (dlpi_kread(kd, (off_t)addr,
		    &ifnet, sizeof(ifnet), ebuf) < 0 ||
		    dlpi_kread(kd, (off_t)ifnet.if_name,
		    if_name, sizeof(ifnet.if_name), ebuf) < 0) {
			(void)close(kd);
			return (-1);
		}
		if_name[sizeof(ifnet.if_name)] = '\0';
		if (strcmp(if_name, ifname) == 0 && ifnet.if_unit == unit)
			return (ifnet.if_index);
	}

	snprintf(ebuf, PCAP_ERRBUF_SIZE, "Can't find %s", ifname);
	return (-1);
}

static int
dlpi_kread(register int fd, register off_t addr,
    register void *buf, register u_int len, register char *ebuf)
{
	register int cc;

	if (lseek(fd, addr, SEEK_SET) < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "lseek: %s",
		    pcap_strerror(errno));
		return (-1);
	}
	cc = read(fd, buf, len);
	if (cc < 0) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "read: %s",
		    pcap_strerror(errno));
		return (-1);
	} else if (cc != len) {
		snprintf(ebuf, PCAP_ERRBUF_SIZE, "short read (%d != %d)", cc,
		    len);
		return (-1);
	}
	return (cc);
}
#endif