Rafal Jaworowski 6365985dfc Initial implementation of the OFW i/f methods for FDT back-end. ... Reviewed by: imp Sponsored by: The FreeBSD Foundation		2010-05-28 10:51:44 +00:00
..
aac	Use enums in the aac_command_status_table rather than duplicating the same	2010-04-13 12:10:55 +00:00
acpi_support
acpica	Oops, HPET ID optionally stored in _UID, not in _ADR.	2010-05-23 08:31:15 +00:00
adb
adlink
advansys
ae	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
age	With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify	2010-04-19 22:10:40 +00:00
agp	Push down the acquisition of the page queues lock into vm_page_unwire().	2010-05-05 03:45:46 +00:00
aha
ahb
ahci	Fill rman range start/end values. It makes devinfo output more readable.	2010-05-22 08:30:47 +00:00
aic
aic7xxx
alc	With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify	2010-04-19 22:10:40 +00:00
ale	It seems ale(4) controllers do not like to see TCP payload in the	2010-04-26 21:08:15 +00:00
amd
amdsbwd
amdtemp
amr
an	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
arcmsr
asmc
asr
ata	Report ATA/SATA channel number to NewBus at location string.	2010-05-22 07:32:47 +00:00
ath	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
atkbdc	On certain chipsets AT keyboard controller isn't present and is	2010-04-29 06:16:00 +00:00
auxio
bce	Add a fastpath to allocate from packet zone when using m_getjcl.	2010-05-07 22:09:17 +00:00
bfe
bge	For the on-board interfaces found in Fujitsu SPARC64 machines obtain the	2010-04-26 18:56:06 +00:00
bktr	Use standard types in preference to BSD types so that these header files	2010-03-28 00:10:09 +00:00
bm
buslogic
bwi	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
bwn	- fixes a bug that it didn't initialize the ratectl after association;	2010-05-15 21:18:15 +00:00
cardbus
cas	- Don't set CAS_PCS_DATAPATH to anything except CAS_PCS_DATAPATH_SERDES	2010-05-03 20:57:16 +00:00
ce	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
cfe
cfi
ciss	Initialize the callout structure earlier in attach before calling any	2010-04-28 18:49:45 +00:00
cm	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
cmx
coretemp
cp	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
cpuctl
cpufreq
cs	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
ct
ctau	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
cx	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
cxgb	Remove invalid assertion.	2010-05-20 18:22:45 +00:00
cy
dc
dcons
de
digi
dpms
dpt
drm	Push down the acquisition of the page queues lock into vm_page_unwire().	2010-05-05 07:40:54 +00:00
e1000	Restore part of 200671 which was lost in previous driver changes:	2010-05-20 20:01:54 +00:00
ed	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
eisa
en
ep	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
esp	Include <machine/ofw_machdep.h> for OF_getscsinitid().	2010-05-10 20:02:39 +00:00
et
ex	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
exca
fatm
fb	Restore the previous VESA mode after BIOS POST, just in case.	2010-05-18 22:30:55 +00:00
fdc
fe	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
firewire	Cast a bus_size_t to a (size_t) to use %zd specifier. Not quite the	2010-03-29 17:24:23 +00:00
flash
fxp	If controller received bad frames make sure to update newly added	2010-05-14 17:39:28 +00:00
gem
glxsb
hatm
hifn
hme
hptiop
hptmv
hptrr
hwpmc	When configuring a system-wide couting PMC, hwpmc was incorrectly logging process mappings for that PMC. Nothing ever reads pmc logs out of a counting PMC, so the log buffers were leaked when the PMC was deconfigured. The process mappings are only useful for sampling PMCs anyway, so only log the mappings if the PMC is a sampling PMC.	2010-05-01 22:04:58 +00:00
ic
ichsmb
ichwd
ida
ie	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
ieee488
if_ndis
iicbus	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
iir
io	- Extract the IODEV_PIO interface from ia64 and make it MI.	2010-04-28 15:38:01 +00:00
ipmi
ips
ipw	Enable 5.5 and 11Mbit TX rates.	2010-05-11 17:14:17 +00:00
iscsi/initiator
isp	Add a new primitive, XPT_SCAN_TGT, to cover the range between scanning a	2010-05-26 22:49:42 +00:00
ispfw
iwi	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
iwn	Add a workaround for a bug in the firmware regarding the transition	2010-05-06 17:53:04 +00:00
ixgb
ixgbe	A few changes:	2010-05-19 00:03:48 +00:00
jme
joy
kbd
kbdmux
ksyms
le	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
led
lge
lindev
lmc
malo	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
mc146818
mca
mcd
md	Lock the page around vm_page_activate() and vm_page_deactivate() calls	2010-05-03 20:31:13 +00:00
mem
mfi
mge
mii	Add Marvell PHYG65G Gigabit PHY which is found on 88E8059 Yukon Optima.	2010-04-30 19:01:55 +00:00
mk48txx
mlx
mly
mmc	Report relative card address to NewBus as location string.	2010-05-23 09:44:48 +00:00
mn
mpt	Print IR_RESYNC updates informatively.	2010-05-02 22:48:27 +00:00
mse
msk	When VLAN hardware tagging is disabled, make sure to disable VLAN	2010-05-04 22:24:19 +00:00
mvs	Fill rman range start/end values. It makes devinfo output more readable.	2010-05-22 08:30:47 +00:00
mwl	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
mxge	Add interrupt descriptions for mxge's msi-x vectors	2010-05-21 15:57:24 +00:00
my	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
ncv
nfe	With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify	2010-04-19 22:10:40 +00:00
nge
nmdm
nsp
null
nve
nvram
nxge	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
ofw	Initial implementation of the OFW i/f methods for FDT back-end.	2010-05-28 10:51:44 +00:00
patm
pbio
pccard
pccbb
pcf
pci	Honor hw.pci.do_power_nodriver on resume. Power-down devices without	2010-05-22 03:19:30 +00:00
pcn
pdq	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
powermac_nvram
ppbus	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
ppc	Add PCI ID for MCS9901's parallel port.	2010-03-23 20:08:18 +00:00
pst
pty
puc	Add support for the Perle Speed4 LE.	2010-05-20 13:16:42 +00:00
quicc	Remove a soft member which was never used.	2010-05-02 19:05:57 +00:00
ral	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
random
rc
re	Don't change PCIe maximum read request size to 2048 on RTL810x	2010-05-07 23:05:27 +00:00
rndtest
rp
safe
sbni	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
scc
scd
sdhci
sec
sf
sge	sge_encap() can sometimes return an error with m_head set to NULL.	2010-05-24 17:12:44 +00:00
si
siba	Revert r204992 and just wrap it all in ifdef INVARIANTS to fix the debug and	2010-03-11 08:03:56 +00:00
siis	Fill rman range start/end values. It makes devinfo output more readable.	2010-05-22 08:30:47 +00:00
sio
sis	It's not necessary to reset the chip every time an input overflow event	2010-04-20 19:30:12 +00:00
sk
smbus
smc	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
sn	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
snc	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
snp
sound	- Remove more dead code[1]. Since r207330, we only need to check division	2010-05-04 16:56:59 +00:00
speaker
spibus
ste
stg
stge
streams
sym	- On sparc64 obtain the initiator ID from the Open Firmware device tree	2010-04-27 18:05:33 +00:00
syscons	Suspend screen updates when the video controller is powered down.	2010-05-22 07:35:17 +00:00
tdfx
ti	Neither the page lock nor the page queues lock is required to unwire and	2010-05-03 15:51:59 +00:00
tl
trm
tsec
twa
twe
tx
txp
uart	Remove redundant checking of sc_leaving (uart_intr() already handles this).	2010-05-02 19:07:19 +00:00
ubsec	Cast the bus_size_t to a intmax_t rather than assuming type-punning to	2010-03-29 17:26:24 +00:00
usb	Add uep(4), driver for USB onscreen touch panel from eGalax.	2010-05-25 21:20:56 +00:00
utopia
vge
vkbd
vr
vx	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
watchdog
wb
wds
wi	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
wl	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
wpi	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
xe	Add new tunable 'net.link.ifqmaxlen' to set default send interface	2010-05-03 07:32:50 +00:00
xen	Switch to our preferred 2-clause BSD license.	2010-05-05 20:39:02 +00:00
xl