freebsd-dev/sys/dev/isci/scil/scic_io_request.h
Pedro F. Giffuni 718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00

764 lines
27 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _SCIC_IO_REQUEST_H_
#define _SCIC_IO_REQUEST_H_
/**
* @file
*
* @brief This file contains the structures and interface methods that
* can be referenced and used by the SCI user for the SCI IO request
* object.
*
* @todo Determine the failure situations and return values.
*/
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
#include <dev/isci/scil/sci_types.h>
#include <dev/isci/scil/sci_status.h>
#include <dev/isci/scil/intel_sas.h>
/**
* @struct SCIC_IO_SSP_PARAMETERS
* @brief This structure contains additional optional parameters for SSP
* IO requests. These parameters are utilized with the
* scic_io_request_construct_advanced_ssp() method.
*
* @todo Add Block-guard/DIF, TLR
*/
typedef struct SCIC_IO_SSP_PARAMETERS
{
/**
* Data Integrity Format (DIF) is also known as protection information
* or block-guard. This sub-structure contains DIF specific feature
* information for SSP IO requests.
*/
struct
{
void * placeholder;
} dif;
/**
* Transport Layer Retries (TLR) is an SSP protocol specific feature.
* This sub-structure contains Transport Layer Retries (TLR) specific
* feature information for SSP IO requests.
*/
struct
{
void * placeholder;
} tlr;
} SCIC_IO_SSP_PARAMETERS_T;
/**
* @struct SCIC_IO_PARAMETERS
* @brief This structure contains additional optional parameters for
* STP/SATA IO requests. These parameters are utilized with the
* scic_io_request_construct_advanced_sata() method.
*/
typedef struct SCIC_IO_SATA_PARAMETERS
{
/**
* This field indicates whether or not to construct the Scatter-Gather
* List elements for the SATA request. This is used in scenarios
* where Scatter-gather-list processing/translation is done by the
* user.
*/
BOOL do_translate_sgl;
} SCIC_IO_SATA_PARAMETERS_T;
/**
* @struct SCIC_PASSTHRU_REQUEST_CALLBACKS
* @brief This structure contains the pointer to the callback functions
* for constructing the passthrough request common to SSP, SMP and STP.
* This structure must be set by the win sci layer before the passthrough
* build is called
*
*/
typedef struct SCIC_PASSTHRU_REQUEST_CALLBACKS
{
/**
* Function pointer to get the phy identifier for passthrough request.
*/
U32 (*scic_cb_passthru_get_phy_identifier) ( void * , U8 *);
/**
* Function pointer to get the port identifier for passthrough request.
*/
U32 (*scic_cb_passthru_get_port_identifier) ( void * , U8 *);
/**
* Function pointer to get the connection rate for passthrough request.
*/
U32 (*scic_cb_passthru_get_connection_rate) ( void * , void *);
/**
* Function pointer to get the destination sas address for passthrough request.
*/
void (*scic_cb_passthru_get_destination_sas_address) (void *, U8 **);
/**
* Function pointer to get the transfer length for passthrough request.
*/
U32 (*scic_cb_passthru_get_transfer_length) (void *);
/**
* Function pointer to get the data direction for passthrough request.
*/
U32 (*scic_cb_passthru_get_data_direction) (void *);
} SCIC_PASSTHRU_REQUEST_CALLBACKS_T;
/**
* @struct SCIC_SSP_PASSTHRU_REQUEST_CALLBACKS
* @brief This structure contains the pointer to the callback functions
* for constructing the passthrough request specific to SSP.
* This structure must be set by the win sci layer before the passthrough
* build is called
*
*/
typedef struct SCIC_SSP_PASSTHRU_REQUEST_CALLBACKS
{
/**
* Common callbacks for all Passthru requests
*/
SCIC_PASSTHRU_REQUEST_CALLBACKS_T common_callbacks;
/**
* Function pointer to get the lun for passthrough request.
*/
void (* scic_cb_ssp_passthru_get_lun) (void *, U8 **);
/**
* Function pointer to get the cdb
*/
void (* scic_cb_ssp_passthru_get_cdb) ( void *, U32 *, U8 **, U32 *, U8 ** );
/**
* Function pointer to get the task attribute for passthrough request.
*/
U32 (*scic_cb_ssp_passthru_get_task_attribute) (void *);
} SCIC_SSP_PASSTHRU_REQUEST_CALLBACKS_T;
/**
* @struct SCIC_STP_PASSTHRU_REQUEST_CALLBACKS
* @brief This structure contains the pointer to the callback functions
* for constructing the passthrough request specific to STP.
* This structure must be set by the win sci layer before the passthrough
* build is called
*
*/
typedef struct SCIC_STP_PASSTHRU_REQUEST_CALLBACKS
{
/**
* Common callbacks for all Passthru requests
*/
SCIC_PASSTHRU_REQUEST_CALLBACKS_T common_callbacks;
/**
* Function pointer to get the protocol for passthrough request.
*/
U8 (* scic_cb_stp_passthru_get_protocol) (void *);
/**
* Function pointer to get the resgister fis
*/
void (* scic_cb_stp_passthru_get_register_fis) ( void *, U8 ** );
/**
* Function pointer to get the MULTIPLE_COUNT (bits 5,6,7 in Byte 1 in the SAT-specific SCSI extenstion in ATA Pass-through (0x85))
*/
U8 (* scic_cb_stp_passthru_get_multiplecount) ( void *);
/**
* Function pointer to get the EXTEND (bit 0 in Byte 1 the SAT-specific SCSI extenstion in ATA Pass-through (0x85))
*/
U8 (* scic_cb_stp_passthru_get_extend) ( void *);
/**
* Function pointer to get the CK_COND (bit 5 in Byte 2 the SAT-specific SCSI extenstion in ATA Pass-through (0x85))
*/
U8 (* scic_cb_stp_passthru_get_ckcond) ( void *);
/**
* Function pointer to get the T_DIR (bit 3 in Byte 2 the SAT-specific SCSI extenstion in ATA Pass-through (0x85))
*/
U8 (* scic_cb_stp_passthru_get_tdir) ( void *);
/**
* Function pointer to get the BYTE_BLOCK (bit 2 in Byte 2 the SAT-specific SCSI extenstion in ATA Pass-through (0x85))
*/
U8 (* scic_cb_stp_passthru_get_byteblock) ( void *);
/**
* Function pointer to get the T_LENGTH (bits 0,1 in Byte 2 the SAT-specific SCSI extenstion in ATA Pass-through (0x85))
*/
U8 (* scic_cb_stp_passthru_get_tlength) ( void *);
} SCIC_STP_PASSTHRU_REQUEST_CALLBACKS_T;
/**
* @struct SCIC_SMP_PASSTHRU_REQUEST_CALLBACKS
* @brief This structure contains the pointer to the callback functions
* for constructing the passthrough request specific to SMP.
* This structure must be set by the win sci layer before the passthrough
* build is called
*
*/
typedef struct SCIC_SMP_PASSTHRU_REQUEST_CALLBACKS
{
/**
* Common callbacks for all Passthru requests
*/
SCIC_PASSTHRU_REQUEST_CALLBACKS_T common_callbacks;
/**
* Function pointer to get the length of the smp request and its length
*/
U32 (* scic_cb_smp_passthru_get_request) ( void *, U8 ** );
/**
* Function pointer to get the frame type of the smp request
*/
U8 (* scic_cb_smp_passthru_get_frame_type) ( void *);
/**
* Function pointer to get the function in the smp request
*/
U8 (* scic_cb_smp_passthru_get_function) ( void * );
/**
* Function pointer to get the "allocated response length" in the smp request
*/
U8 (* scic_cb_smp_passthru_get_allocated_response_length) ( void * );
} SCIC_SMP_PASSTHRU_REQUEST_CALLBACKS_T;
/**
* @brief This enumeration specifies the transport protocol utilized
* for the request.
*/
typedef enum
{
/**
* This enumeration constant indicates that no protocol has yet been
* set.
*/
SCIC_NO_PROTOCOL,
/**
* This enumeration constant indicates that the protocol utilized
* is the Serial Management Protocol.
*/
SCIC_SMP_PROTOCOL,
/**
* This enumeration constant indicates that the protocol utilized
* is the Serial SCSI Protocol.
*/
SCIC_SSP_PROTOCOL,
/**
* This enumeration constant indicates that the protocol utilized
* is the Serial-ATA Tunneling Protocol.
*/
SCIC_STP_PROTOCOL
} SCIC_TRANSPORT_PROTOCOL;
/**
* @brief This method simply returns the size required to build an SCI
* based IO request object.
*
* @return Return the size of the SCI IO request object.
*/
U32 scic_io_request_get_object_size(
void
);
/**
* @brief This method is called by the SCI user to construct all SCI Core
* IO requests. Memory initialization and functionality common to
* all IO request types is performed in this method.
*
* @note The SCI core implementation will create an association between
* the user IO request object and the core IO request object.
*
* @param[in] scic_controller the handle to the core controller object
* for which to build an IO request.
* @param[in] scic_remote_device the handle to the core remote device
* object for which to build an IO request.
* @param[in] io_tag This parameter specifies the IO tag to be associated
* with this request. If SCI_CONTROLLER_INVALID_IO_TAG is
* passed, then a copy of the request is built internally. The
* request will be copied into the actual controller request
* memory when the IO tag is allocated internally during the
* scic_controller_start_io() method.
* @param[in] user_io_request_object This parameter specifies the user
* IO request to be utilized during IO construction. This IO
* pointer will become the associated object for the core
* IO request object.
* @param[in] scic_io_request_memory This parameter specifies the memory
* location to be utilized when building the core request.
* @param[out] new_scic_io_request_handle This parameter specifies a
* pointer to the handle the core will expect in further
* interactions with the core IO request object.
*
* @return Indicate if the controller successfully built the IO request.
* @retval SCI_SUCCESS This value is returned if the IO request was
* successfully built.
*/
SCI_STATUS scic_io_request_construct(
SCI_CONTROLLER_HANDLE_T scic_controller,
SCI_REMOTE_DEVICE_HANDLE_T scic_remote_device,
U16 io_tag,
void * user_io_request_object,
void * scic_io_request_memory,
SCI_IO_REQUEST_HANDLE_T * new_scic_io_request_handle
);
/**
* @brief This method is called by the SCI user to build an SSP
* IO request.
*
* @pre
* - The user must have previously called scic_io_request_construct()
* on the supplied IO request.
*
* @param[in] scic_io_request This parameter specifies the handle to the
* io request object to be built.
*
* @return Indicate if the controller successfully built the IO request.
* @retval SCI_SUCCESS This value is returned if the IO request was
* successfully built.
* @retval SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned if the
* remote_device does not support the SSP protocol.
* @retval SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the
* user did not properly set the association between the SCIC IO
* request and the user's IO request. Please refer to the
* sci_object_set_association() routine for more
* information.
*/
SCI_STATUS scic_io_request_construct_basic_ssp(
SCI_IO_REQUEST_HANDLE_T scic_io_request
);
/**
* @brief This method is called by the SCI user to build an SSP
* IO request with additional parameters that provide additional
* flexibility from the standard scic_io_request_construct_basic_ssp()
* method.
*
* @pre
* - The user must have previously called scic_io_request_construct()
* on the supplied IO request.
*
* @param[in] scic_io_request This parameter specifies the handle to the
* io request object to be built.
* @param[in] io_parameters the additional parameter information to
* be added to the outgoing IO request.
*
* @return Indicate if the controller successfully built the IO request.
* @retval SCI_SUCCESS This value is returned if the IO request was
* successfully built.
* @retval SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned if the
* remote_device does not support the SSP protocol.
* @retval SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the
* user did not properly set the association between the SCIC IO
* request and the user's IO request. Please refer to the
* sci_object_set_association() routine for more
* information.
*
* @todo Determine the failure situations and return values.
*/
SCI_STATUS scic_io_request_construct_advanced_ssp(
SCI_IO_REQUEST_HANDLE_T scic_io_request,
SCIC_IO_SSP_PARAMETERS_T * io_parameters
);
#if !defined(DISABLE_PASS_THROUGH)
/**
* @brief This method will build an IO request based on the user information
* supplied in the pass-through IO request object.
*
* @param[in] scic_io_request This parameter specifies the handle to the
* io request object to be built.
*
* @param[in] ssp_passthru_cb This parameter specifies the pointer to
* the structure containing the callback to the function
* pointers to get the needed fields from the pass-through
* reqiest instead of SRB
*
* @return Indicate if the controller successfully built the IO request.
* @retval SCI_SUCCESS This value is returned if the IO request was
* successfully built.
* @retval SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the
* user did not properly set the association between the SCIC IO
* request and the user's IO request. Please refer to the
* sci_object_set_association() routine for more
* information.
*/
SCI_STATUS scic_io_request_construct_ssp_pass_through(
void * scic_io_request_memory,
SCIC_SSP_PASSTHRU_REQUEST_CALLBACKS_T *ssp_passthru_cb
);
#else // !defined(DISABLE_PASS_THROUGH)
#define scic_io_request_construct_ssp_pass_through(memory, cb) SCI_FAILURE
#endif // !defined(DISABLE_PASS_THROUGH)
/**
* @brief This method is called by the SCI Core user to build an STP
* IO request.
*
* @pre
* - The user must have previously called scic_io_request_construct()
* on the supplied IO request.
*
* @param[in] scic_io_request This parameter specifies the handle to the
* io request object to be built.
*
* @return Indicate if the controller successfully built the IO request.
* @retval SCI_SUCCESS This value is returned if the IO request was
* successfully built.
* @retval SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned if the
* remote_device does not support the STP protocol.
* @retval SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the
* user did not properly set the association between the SCIC IO
* request and the user's IO request. Please refer to the
* sci_object_set_association() routine for more
* information.
*/
SCI_STATUS scic_io_request_construct_basic_sata(
SCI_IO_REQUEST_HANDLE_T scic_io_request
);
/**
* @brief This method is called by the SCI Core user to build an STP
* IO request.
*
* @pre
* - The user must have previously called scic_io_request_construct()
* on the supplied IO request.
*
* @param[in] scic_io_request This parameter specifies the handle to the
* io request object to be built.
*
* @return Indicate if the controller successfully built the IO request.
* @retval SCI_SUCCESS This value is returned if the IO request was
* successfully built.
* @retval SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned if the
* remote_device does not support the STP protocol.
* @retval SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the
* user did not properly set the association between the SCIC IO
* request and the user's IO request. Please refer to the
* sci_object_set_association() routine for more
* information.
*/
SCI_STATUS scic_io_request_construct_advanced_sata(
SCI_IO_REQUEST_HANDLE_T scic_io_request,
SCIC_IO_SATA_PARAMETERS_T * io_parameters
);
#if !defined(DISABLE_PASS_THROUGH)
/**
* @brief This method is called by the SCI user to build an STP pass-through
* IO request.
*
* @pre
* - The user must have previously called scic_io_request_construct()
* on the supplied IO request.
*
* @param[in] scic_io_request This parameter specifies the handle to the
* io request object to be built.
*
* @param[in] passthru_cb This parameter specifies the pointer to the callback
* structure that contains the function pointers
*
* @return Indicate if the controller successfully built the IO request.
*/
SCI_STATUS scic_io_request_construct_sata_pass_through(
SCI_IO_REQUEST_HANDLE_T scic_io_request,
SCIC_STP_PASSTHRU_REQUEST_CALLBACKS_T *passthru_cb
);
#else // !defined(DISABLE_PASS_THROUGH)
#define scic_io_request_construct_sata_pass_through(io, cb) SCI_FAILURE
#endif // !defined(DISABLE_PASS_THROUGH)
/**
* @brief This method is called by the SCI user to build an SMP
* IO request.
*
* @pre
* - The user must have previously called scic_io_request_construct()
* on the supplied IO request.
*
* @param[in] scic_io_request This parameter specifies the handle to the
* io request object to be built.
*
* @return Indicate if the controller successfully built the IO request.
* @retval SCI_SUCCESS This value is returned if the IO request was
* successfully built.
* @retval SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned if the
* remote_device does not support the SMP protocol.
* @retval SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the
* user did not properly set the association between the SCIC IO
* request and the user's IO request. Please refer to the
* sci_object_set_association() routine for more
* information.
*/
SCI_STATUS scic_io_request_construct_smp(
SCI_IO_REQUEST_HANDLE_T scic_io_request
);
/**
* @brief This method is called by the SCI user to build an SMP pass-through
* IO request.
*
* @pre
* - The user must have previously called scic_io_request_construct()
* on the supplied IO request.
*
* @param[in] scic_smp_request This parameter specifies the handle to the
* io request object to be built.
*
* @param[in] passthru_cb This parameter specifies the pointer to the callback
* structure that contains the function pointers
*
* @return Indicate if the controller successfully built the IO request.
*/
SCI_STATUS scic_io_request_construct_smp_pass_through(
SCI_IO_REQUEST_HANDLE_T scic_smp_request,
SCIC_SMP_PASSTHRU_REQUEST_CALLBACKS_T *passthru_cb
);
/**
* @brief This method returns the controller specific IO/Task request status.
* These status values are unique to the specific controller being
* managed by the SCIC.
*
* @param[in] io_request the handle to the IO or task management request
* object for which to retrieve the status.
*
* @return This method returns a value indicating the controller specific
* request status.
*/
U32 scic_request_get_controller_status(
SCI_IO_REQUEST_HANDLE_T io_request
);
/**
* @brief This method returns the user specific IO/Task request status.
*
* @param[in] io_request the handle to the IO or task management request
* object for which to retrieve the status.
*
* @return This method returns a value indicating the user specific
* request status.
*/
U32 scic_request_get_sci_status(
SCI_IO_REQUEST_HANDLE_T io_request
);
/**
* @brief This method will return the address to the command information
* unit.
*
* @param[in] scic_io_request This parameter specifies the handle to the
* io request object to be built.
*
* @return The address of the SSP/SMP command information unit.
*/
void * scic_io_request_get_command_iu_address(
SCI_IO_REQUEST_HANDLE_T scic_io_request
);
/**
* @brief This method will return the address to the response information
* unit. For an SSP request this buffer is only valid if the IO
* request is completed with the status SCI_FAILURE_IO_RESPONSE_VALID.
*
* @param[in] scic_io_request This parameter specifies the handle to the
* io request object to be built.
*
* @return The address of the SSP/SMP response information unit.
*/
void * scic_io_request_get_response_iu_address(
SCI_IO_REQUEST_HANDLE_T scic_io_request
);
/**
* @brief This method will return the IO tag utilized by the IO request.
*
* @param[in] scic_io_request This parameter specifies the handle to the
* io request object for which to return the IO tag.
*
* @return An unsigned integer representing the IO tag being utilized.
* @retval SCI_CONTROLLER_INVALID_IO_TAG This value is returned if the IO
* does not currently have an IO tag allocated to it.
* @retval All return other values indicate a legitimate tag.
*/
U16 scic_io_request_get_io_tag(
SCI_IO_REQUEST_HANDLE_T scic_io_request
);
/**
* @brief This method will inform the user of the protocol with which
* the supplied IO request was created.
*
* @param[in] scic_io_request This parameter specifies the IO request
* for which to retrieve the protocol.
*
* @return This method returns the transport protocol utilized for the
* the supplied request. Please refer to SCIC_TRANSPORT_PROTOCOL
* for more information.
*/
SCIC_TRANSPORT_PROTOCOL scic_io_request_get_protocol(
SCI_IO_REQUEST_HANDLE_T scic_io_request
);
/**
* @brief This method will assign an NCQ tag to the io request object. The
* caller of this function must make sure that only valid NCQ tags are
* assigned to the io request object.
*
* @param[in] scic_io_request This parameter specifies the handle to the
* io request object to which to assign the ncq tag.
* @param[in] ncq_tag This parameter specifies the NCQ tag to be utilized
* for the supplied core IO request. It is up to the user to make
* sure that this is a valid NCQ tag.
*
* @return none
*
* @note This function is only valid for SATA NCQ requests.
*/
void scic_stp_io_request_set_ncq_tag(
SCI_IO_REQUEST_HANDLE_T scic_io_request,
U16 ncq_tag
);
/**
* @brief This method will return the address of the host to device register
* fis region for the io request object.
*
* @param[in] scic_io_request This parameter specifies the handle to the io
* request object from which to get the host to device register fis
* buffer.
*
* @return The address of the host to device register fis buffer in the io
* request object.
*
* @note This function is only valid for SATA requests.
*/
void * scic_stp_io_request_get_h2d_reg_address(
SCI_IO_REQUEST_HANDLE_T scic_io_request
);
/**
* @brief This method will return the address of the device to host register
* fis region for the io request object.
*
* @param[in] scic_io_request This parameter specifies the handle to the io
* request object from which to get the device to host register fis
* buffer.
*
* @return The address fo the device to host register fis ending the io
* request.
*
* @note This function is only valid for SATA requests.
*/
void * scic_stp_io_request_get_d2h_reg_address(
SCI_IO_REQUEST_HANDLE_T scic_io_request
);
/**
* @brief This method will return the rx frame for the io request object that
* contains the given offset.
*
* @param[in] scic_io_request This parameter specifies the handle to the io
* request object which has received the frame data.
* @param[in] offset This parameter specifies which frame is being requested.
*
* @return The return is a pointer to the frame buffer data.
*
* @note Frame buffers are only 1024 bytes in size. Reading past the end of a
* frame will have unexpected results.
*/
void * scic_io_request_get_rx_frame(
SCI_IO_REQUEST_HANDLE_T scic_io_request,
U32 offset
);
/**
* @brief This method will return the number of bytes transferred from the SCU
*
* @param[in] scic_io_request This parameter specifies the handle to the io request
* whose data length was not eqaul to the data length specified in the request.
* When the driver gets an early io completion status from the hardware,
* this routine should be called to get the actual number of bytes transferred
*
* @return The return is the number of bytes transferred when the data legth is not equal to
* the specified length in the io request
*
*/
U32 scic_io_request_get_number_of_bytes_transferred (
SCI_IO_REQUEST_HANDLE_T scic_io_request
);
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // _SCIC_IO_REQUEST_H_