freebsd-dev/sys/dev/isci/scil/scic_port.h
Pedro F. Giffuni 718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00

242 lines
8.0 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _SCIC_PORT_H_
#define _SCIC_PORT_H_
/**
* @file
*
* @brief This file contains all of the interface methods that can be called
* by an SCI Core user on a SAS or SATA port.
*/
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
#include <dev/isci/scil/sci_types.h>
#include <dev/isci/scil/sci_status.h>
#include <dev/isci/scil/intel_sas.h>
enum SCIC_PORT_NOT_READY_REASON_CODE
{
SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS,
SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED,
SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION,
SCIC_PORT_NOT_READY_RECONFIGURING,
SCIC_PORT_NOT_READY_REASON_CODE_MAX
};
/**
* @struct SCIC_PORT_END_POINT_PROPERTIES
* @brief This structure defines the properties that can be retrieved
* for each end-point local or remote (attached) port in the
* controller.
*/
typedef struct SCIC_PORT_END_POINT_PROPERTIES
{
/**
* This field indicates the SAS address for the associated end
* point in the port.
*/
SCI_SAS_ADDRESS_T sas_address;
/**
* This field indicates the protocols supported by the associated
* end-point in the port.
*/
SCI_SAS_IDENTIFY_ADDRESS_FRAME_PROTOCOLS_T protocols;
} SCIC_PORT_END_POINT_PROPERTIES_T;
/**
* @struct SCIC_PORT_PROPERTIES
* @brief This structure defines the properties that can be retrieved
* for each port in the controller.
*/
typedef struct SCIC_PORT_PROPERTIES
{
/**
* This field specifies the logical index of the port (0 relative).
*/
U32 index;
/**
* This field indicates the local end-point properties for port.
*/
SCIC_PORT_END_POINT_PROPERTIES_T local;
/**
* This field indicates the remote (attached) end-point properties
* for the port.
*/
SCIC_PORT_END_POINT_PROPERTIES_T remote;
/**
* This field specifies the phys contained inside the port.
*/
U32 phy_mask;
} SCIC_PORT_PROPERTIES_T;
/**
* @brief This method simply returns the properties regarding the
* port, such as: physical index, protocols, sas address, etc.
*
* @param[in] port this parameter specifies the port for which to retrieve
* the physical index.
* @param[out] properties This parameter specifies the properties
* structure into which to copy the requested information.
*
* @return Indicate if the user specified a valid port.
* @retval SCI_SUCCESS This value is returned if the specified port was valid.
* @retval SCI_FAILURE_INVALID_PORT This value is returned if the specified port
* is not valid. When this value is returned, no data is copied to the
* properties output parameter.
*/
SCI_STATUS scic_port_get_properties(
SCI_PORT_HANDLE_T port,
SCIC_PORT_PROPERTIES_T * properties
);
/**
* @brief This method will add a phy to an existing port.
*
* @param[in] port This parameter specifies the port in which to add a new
* phy.
* @param[in] phy This parameter specifies the phy to be added to the port.
*
* @return Indicate if the phy was successfully added to the port.
* @retval SCI_SUCCESS This value is returned if the phy was successfully
* added to the port.
* @retval SCI_FAILURE_INVALID_PORT This value is returned if the supplied
* port is not valid.
* @retval SCI_FAILURE_INVALID_PHY This value is returned if the supplied
* phy is either invalid or already contained in another port.
*/
SCI_STATUS scic_port_add_phy(
SCI_PORT_HANDLE_T port,
SCI_PHY_HANDLE_T phy
);
/**
* @brief This method will remove a phy from an existing port.
*
* @param[in] port This parameter specifies the port in which to remove a
* phy.
* @param[in] phy This parameter specifies the phy to be removed from the
* port.
*
* @return Indicate if the phy was successfully removed from the port.
* @retval SCI_SUCCESS This value is returned if the phy was successfully
* removed from the port.
* @retval SCI_FAILURE_INVALID_PORT This value is returned if the supplied
* port is not valid.
* @retval SCI_FAILURE_INVALID_PHY This value is returned if the supplied
* phy is either invalid or
* not contained in the port.
*/
SCI_STATUS scic_port_remove_phy(
SCI_PORT_HANDLE_T port,
SCI_PHY_HANDLE_T phy
);
/**
* @brief This method will request the SCI implementation to perform a
* HARD RESET on the SAS Port. If/When the HARD RESET completes
* the SCI user will be notified via an SCI OS callback indicating
* a direct attached device was found.
*
* @note The SCI User callback in SCIC_USER_CALLBACKS_T will only be called
* once for each phy in the SAS Port at completion of the hard reset
* sequence.
*
* @param[in] port a handle corresponding to the SAS port to be
* hard reset.
* @param[in] reset_timeout This parameter specifies the number of
* milliseconds in which the port reset operation should complete.
*
* @return Return a status indicating whether the hard reset started
* successfully.
* @retval SCI_SUCCESS This value is returned if the hard reset operation
* started successfully.
*/
SCI_STATUS scic_port_hard_reset(
SCI_PORT_HANDLE_T port,
U32 reset_timeout
);
/**
* @brief This API method enables the broadcast change notification from
* underneath hardware.
*
* @param[in] port The port upon which broadcast change notifications
* (BCN) are to be enabled.
*
* @return none
*/
void scic_port_enable_broadcast_change_notification(
SCI_PORT_HANDLE_T port
);
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // _SCIC_PORT_H_