freebsd-dev/sys/dev/usb/serial/umct.c
Hans Petter Selasky f1a16106b6 - Move all USB device ID arrays into so-called sections,
sorted according to the mode which they support:
	host, device or dual mode
- Add generic tool to extract these data:
	tools/bus_autoconf

Discussed with:	imp
Suggested by:	Robert Millan <rmh@debian.org>
PR:		misc/157903
MFC after:	14 days
2011-06-24 02:30:02 +00:00

640 lines
15 KiB
C

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*-
* Copyright (c) 2003 Scott Long
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/*
* Driver for the MCT (Magic Control Technology) USB-RS232 Converter.
* Based on the superb documentation from the linux mct_u232 driver by
* Wolfgang Grandeggar <wolfgang@cec.ch>.
* This device smells a lot like the Belkin F5U103, except that it has
* suffered some mild brain-damage. This driver is based off of the ubsa.c
* driver from Alexander Kabaev <kan@FreeBSD.org>. Merging the two together
* might be useful, though the subtle differences might lead to lots of
* #ifdef's.
*/
/*
* NOTE: all function names beginning like "umct_cfg_" can only
* be called from within the config thread function !
*/
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include "usbdevs.h"
#define USB_DEBUG_VAR usb_debug
#include <dev/usb/usb_debug.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/serial/usb_serial.h>
/* The UMCT advertises the standard 8250 UART registers */
#define UMCT_GET_MSR 2 /* Get Modem Status Register */
#define UMCT_GET_MSR_SIZE 1
#define UMCT_GET_LCR 6 /* Get Line Control Register */
#define UMCT_GET_LCR_SIZE 1
#define UMCT_SET_BAUD 5 /* Set the Baud Rate Divisor */
#define UMCT_SET_BAUD_SIZE 4
#define UMCT_SET_LCR 7 /* Set Line Control Register */
#define UMCT_SET_LCR_SIZE 1
#define UMCT_SET_MCR 10 /* Set Modem Control Register */
#define UMCT_SET_MCR_SIZE 1
#define UMCT_INTR_INTERVAL 100
#define UMCT_IFACE_INDEX 0
#define UMCT_CONFIG_INDEX 0
enum {
UMCT_BULK_DT_WR,
UMCT_BULK_DT_RD,
UMCT_INTR_DT_RD,
UMCT_N_TRANSFER,
};
struct umct_softc {
struct ucom_super_softc sc_super_ucom;
struct ucom_softc sc_ucom;
struct usb_device *sc_udev;
struct usb_xfer *sc_xfer[UMCT_N_TRANSFER];
struct mtx sc_mtx;
uint32_t sc_unit;
uint16_t sc_obufsize;
uint8_t sc_lsr;
uint8_t sc_msr;
uint8_t sc_lcr;
uint8_t sc_mcr;
uint8_t sc_iface_no;
uint8_t sc_swap_cb;
uint8_t sc_name[16];
};
/* prototypes */
static device_probe_t umct_probe;
static device_attach_t umct_attach;
static device_detach_t umct_detach;
static usb_callback_t umct_intr_callback;
static usb_callback_t umct_intr_callback_sub;
static usb_callback_t umct_read_callback;
static usb_callback_t umct_read_callback_sub;
static usb_callback_t umct_write_callback;
static void umct_cfg_do_request(struct umct_softc *sc, uint8_t request,
uint16_t len, uint32_t value);
static void umct_cfg_get_status(struct ucom_softc *, uint8_t *,
uint8_t *);
static void umct_cfg_set_break(struct ucom_softc *, uint8_t);
static void umct_cfg_set_dtr(struct ucom_softc *, uint8_t);
static void umct_cfg_set_rts(struct ucom_softc *, uint8_t);
static uint8_t umct_calc_baud(uint32_t);
static int umct_pre_param(struct ucom_softc *, struct termios *);
static void umct_cfg_param(struct ucom_softc *, struct termios *);
static void umct_start_read(struct ucom_softc *);
static void umct_stop_read(struct ucom_softc *);
static void umct_start_write(struct ucom_softc *);
static void umct_stop_write(struct ucom_softc *);
static void umct_poll(struct ucom_softc *ucom);
static const struct usb_config umct_config[UMCT_N_TRANSFER] = {
[UMCT_BULK_DT_WR] = {
.type = UE_BULK,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_OUT,
.bufsize = 0, /* use wMaxPacketSize */
.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
.callback = &umct_write_callback,
},
[UMCT_BULK_DT_RD] = {
.type = UE_INTERRUPT,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_IN,
.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
.bufsize = 0, /* use wMaxPacketSize */
.callback = &umct_read_callback,
.ep_index = 0, /* first interrupt endpoint */
},
[UMCT_INTR_DT_RD] = {
.type = UE_INTERRUPT,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_IN,
.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
.bufsize = 0, /* use wMaxPacketSize */
.callback = &umct_intr_callback,
.ep_index = 1, /* second interrupt endpoint */
},
};
static const struct ucom_callback umct_callback = {
.ucom_cfg_get_status = &umct_cfg_get_status,
.ucom_cfg_set_dtr = &umct_cfg_set_dtr,
.ucom_cfg_set_rts = &umct_cfg_set_rts,
.ucom_cfg_set_break = &umct_cfg_set_break,
.ucom_cfg_param = &umct_cfg_param,
.ucom_pre_param = &umct_pre_param,
.ucom_start_read = &umct_start_read,
.ucom_stop_read = &umct_stop_read,
.ucom_start_write = &umct_start_write,
.ucom_stop_write = &umct_stop_write,
.ucom_poll = &umct_poll,
};
static const STRUCT_USB_HOST_ID umct_devs[] = {
{USB_VPI(USB_VENDOR_MCT, USB_PRODUCT_MCT_USB232, 0)},
{USB_VPI(USB_VENDOR_MCT, USB_PRODUCT_MCT_SITECOM_USB232, 0)},
{USB_VPI(USB_VENDOR_MCT, USB_PRODUCT_MCT_DU_H3SP_USB232, 0)},
{USB_VPI(USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5U109, 0)},
{USB_VPI(USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5U409, 0)},
};
static device_method_t umct_methods[] = {
DEVMETHOD(device_probe, umct_probe),
DEVMETHOD(device_attach, umct_attach),
DEVMETHOD(device_detach, umct_detach),
{0, 0}
};
static devclass_t umct_devclass;
static driver_t umct_driver = {
.name = "umct",
.methods = umct_methods,
.size = sizeof(struct umct_softc),
};
DRIVER_MODULE(umct, uhub, umct_driver, umct_devclass, NULL, 0);
MODULE_DEPEND(umct, ucom, 1, 1, 1);
MODULE_DEPEND(umct, usb, 1, 1, 1);
MODULE_VERSION(umct, 1);
static int
umct_probe(device_t dev)
{
struct usb_attach_arg *uaa = device_get_ivars(dev);
if (uaa->usb_mode != USB_MODE_HOST) {
return (ENXIO);
}
if (uaa->info.bConfigIndex != UMCT_CONFIG_INDEX) {
return (ENXIO);
}
if (uaa->info.bIfaceIndex != UMCT_IFACE_INDEX) {
return (ENXIO);
}
return (usbd_lookup_id_by_uaa(umct_devs, sizeof(umct_devs), uaa));
}
static int
umct_attach(device_t dev)
{
struct usb_attach_arg *uaa = device_get_ivars(dev);
struct umct_softc *sc = device_get_softc(dev);
int32_t error;
uint16_t maxp;
uint8_t iface_index;
sc->sc_udev = uaa->device;
sc->sc_unit = device_get_unit(dev);
device_set_usb_desc(dev);
mtx_init(&sc->sc_mtx, "umct", NULL, MTX_DEF);
snprintf(sc->sc_name, sizeof(sc->sc_name),
"%s", device_get_nameunit(dev));
sc->sc_iface_no = uaa->info.bIfaceNum;
iface_index = UMCT_IFACE_INDEX;
error = usbd_transfer_setup(uaa->device, &iface_index,
sc->sc_xfer, umct_config, UMCT_N_TRANSFER, sc, &sc->sc_mtx);
if (error) {
device_printf(dev, "allocating USB "
"transfers failed\n");
goto detach;
}
/*
* The real bulk-in endpoint is also marked as an interrupt.
* The only way to differentiate it from the real interrupt
* endpoint is to look at the wMaxPacketSize field.
*/
maxp = usbd_xfer_max_framelen(sc->sc_xfer[UMCT_BULK_DT_RD]);
if (maxp == 0x2) {
/* guessed wrong - switch around endpoints */
struct usb_xfer *temp = sc->sc_xfer[UMCT_INTR_DT_RD];
sc->sc_xfer[UMCT_INTR_DT_RD] = sc->sc_xfer[UMCT_BULK_DT_RD];
sc->sc_xfer[UMCT_BULK_DT_RD] = temp;
sc->sc_swap_cb = 1;
}
sc->sc_obufsize = usbd_xfer_max_len(sc->sc_xfer[UMCT_BULK_DT_WR]);
if (uaa->info.idProduct == USB_PRODUCT_MCT_SITECOM_USB232) {
if (sc->sc_obufsize > 16) {
sc->sc_obufsize = 16;
}
}
error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc,
&umct_callback, &sc->sc_mtx);
if (error) {
goto detach;
}
ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
return (0); /* success */
detach:
umct_detach(dev);
return (ENXIO); /* failure */
}
static int
umct_detach(device_t dev)
{
struct umct_softc *sc = device_get_softc(dev);
ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom);
usbd_transfer_unsetup(sc->sc_xfer, UMCT_N_TRANSFER);
mtx_destroy(&sc->sc_mtx);
return (0);
}
static void
umct_cfg_do_request(struct umct_softc *sc, uint8_t request,
uint16_t len, uint32_t value)
{
struct usb_device_request req;
usb_error_t err;
uint8_t temp[4];
if (len > 4)
len = 4;
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = request;
USETW(req.wValue, 0);
req.wIndex[0] = sc->sc_iface_no;
req.wIndex[1] = 0;
USETW(req.wLength, len);
USETDW(temp, value);
err = ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
&req, temp, 0, 1000);
if (err) {
DPRINTFN(0, "device request failed, err=%s "
"(ignored)\n", usbd_errstr(err));
}
return;
}
static void
umct_intr_callback_sub(struct usb_xfer *xfer, usb_error_t error)
{
struct umct_softc *sc = usbd_xfer_softc(xfer);
struct usb_page_cache *pc;
uint8_t buf[2];
int actlen;
usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
if (actlen < 2) {
DPRINTF("too short message\n");
goto tr_setup;
}
pc = usbd_xfer_get_frame(xfer, 0);
usbd_copy_out(pc, 0, buf, sizeof(buf));
sc->sc_msr = buf[0];
sc->sc_lsr = buf[1];
ucom_status_change(&sc->sc_ucom);
case USB_ST_SETUP:
tr_setup:
usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
usbd_transfer_submit(xfer);
return;
default: /* Error */
if (error != USB_ERR_CANCELLED) {
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
goto tr_setup;
}
return;
}
}
static void
umct_cfg_get_status(struct ucom_softc *ucom, uint8_t *lsr, uint8_t *msr)
{
struct umct_softc *sc = ucom->sc_parent;
*lsr = sc->sc_lsr;
*msr = sc->sc_msr;
}
static void
umct_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff)
{
struct umct_softc *sc = ucom->sc_parent;
if (onoff)
sc->sc_lcr |= 0x40;
else
sc->sc_lcr &= ~0x40;
umct_cfg_do_request(sc, UMCT_SET_LCR, UMCT_SET_LCR_SIZE, sc->sc_lcr);
}
static void
umct_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
{
struct umct_softc *sc = ucom->sc_parent;
if (onoff)
sc->sc_mcr |= 0x01;
else
sc->sc_mcr &= ~0x01;
umct_cfg_do_request(sc, UMCT_SET_MCR, UMCT_SET_MCR_SIZE, sc->sc_mcr);
}
static void
umct_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff)
{
struct umct_softc *sc = ucom->sc_parent;
if (onoff)
sc->sc_mcr |= 0x02;
else
sc->sc_mcr &= ~0x02;
umct_cfg_do_request(sc, UMCT_SET_MCR, UMCT_SET_MCR_SIZE, sc->sc_mcr);
}
static uint8_t
umct_calc_baud(uint32_t baud)
{
switch (baud) {
case B300:return (0x1);
case B600:
return (0x2);
case B1200:
return (0x3);
case B2400:
return (0x4);
case B4800:
return (0x6);
case B9600:
return (0x8);
case B19200:
return (0x9);
case B38400:
return (0xa);
case B57600:
return (0xb);
case 115200:
return (0xc);
case B0:
default:
break;
}
return (0x0);
}
static int
umct_pre_param(struct ucom_softc *ucom, struct termios *t)
{
return (0); /* we accept anything */
}
static void
umct_cfg_param(struct ucom_softc *ucom, struct termios *t)
{
struct umct_softc *sc = ucom->sc_parent;
uint32_t value;
value = umct_calc_baud(t->c_ospeed);
umct_cfg_do_request(sc, UMCT_SET_BAUD, UMCT_SET_BAUD_SIZE, value);
value = (sc->sc_lcr & 0x40);
switch (t->c_cflag & CSIZE) {
case CS5:
value |= 0x0;
break;
case CS6:
value |= 0x1;
break;
case CS7:
value |= 0x2;
break;
default:
case CS8:
value |= 0x3;
break;
}
value |= (t->c_cflag & CSTOPB) ? 0x4 : 0;
if (t->c_cflag & PARENB) {
value |= 0x8;
value |= (t->c_cflag & PARODD) ? 0x0 : 0x10;
}
/*
* XXX There doesn't seem to be a way to tell the device
* to use flow control.
*/
sc->sc_lcr = value;
umct_cfg_do_request(sc, UMCT_SET_LCR, UMCT_SET_LCR_SIZE, value);
}
static void
umct_start_read(struct ucom_softc *ucom)
{
struct umct_softc *sc = ucom->sc_parent;
/* start interrupt endpoint */
usbd_transfer_start(sc->sc_xfer[UMCT_INTR_DT_RD]);
/* start read endpoint */
usbd_transfer_start(sc->sc_xfer[UMCT_BULK_DT_RD]);
}
static void
umct_stop_read(struct ucom_softc *ucom)
{
struct umct_softc *sc = ucom->sc_parent;
/* stop interrupt endpoint */
usbd_transfer_stop(sc->sc_xfer[UMCT_INTR_DT_RD]);
/* stop read endpoint */
usbd_transfer_stop(sc->sc_xfer[UMCT_BULK_DT_RD]);
}
static void
umct_start_write(struct ucom_softc *ucom)
{
struct umct_softc *sc = ucom->sc_parent;
usbd_transfer_start(sc->sc_xfer[UMCT_BULK_DT_WR]);
}
static void
umct_stop_write(struct ucom_softc *ucom)
{
struct umct_softc *sc = ucom->sc_parent;
usbd_transfer_stop(sc->sc_xfer[UMCT_BULK_DT_WR]);
}
static void
umct_read_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct umct_softc *sc = usbd_xfer_softc(xfer);
if (sc->sc_swap_cb)
umct_intr_callback_sub(xfer, error);
else
umct_read_callback_sub(xfer, error);
}
static void
umct_intr_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct umct_softc *sc = usbd_xfer_softc(xfer);
if (sc->sc_swap_cb)
umct_read_callback_sub(xfer, error);
else
umct_intr_callback_sub(xfer, error);
}
static void
umct_write_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct umct_softc *sc = usbd_xfer_softc(xfer);
struct usb_page_cache *pc;
uint32_t actlen;
switch (USB_GET_STATE(xfer)) {
case USB_ST_SETUP:
case USB_ST_TRANSFERRED:
tr_setup:
pc = usbd_xfer_get_frame(xfer, 0);
if (ucom_get_data(&sc->sc_ucom, pc, 0,
sc->sc_obufsize, &actlen)) {
usbd_xfer_set_frame_len(xfer, 0, actlen);
usbd_transfer_submit(xfer);
}
return;
default: /* Error */
if (error != USB_ERR_CANCELLED) {
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
goto tr_setup;
}
return;
}
}
static void
umct_read_callback_sub(struct usb_xfer *xfer, usb_error_t error)
{
struct umct_softc *sc = usbd_xfer_softc(xfer);
struct usb_page_cache *pc;
int actlen;
usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
pc = usbd_xfer_get_frame(xfer, 0);
ucom_put_data(&sc->sc_ucom, pc, 0, actlen);
case USB_ST_SETUP:
tr_setup:
usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
usbd_transfer_submit(xfer);
return;
default: /* Error */
if (error != USB_ERR_CANCELLED) {
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
goto tr_setup;
}
return;
}
}
static void
umct_poll(struct ucom_softc *ucom)
{
struct umct_softc *sc = ucom->sc_parent;
usbd_transfer_poll(sc->sc_xfer, UMCT_N_TRANSFER);
}