9d7ccc0ffa
- Add OpenBSD example rulesets as advertised in etc/pf.conf and pf.conf(5) - Tweak the pointer to fit the FreeBSD default location share/examples/pf - Account for the new directory in BSD.usr.dist (no hier(7) change required as share/examples is an opaque item there). Obtained from: OpenBSD Reminded by: Thomas T. Veldhouse PR: docs/71691 MFC after: 2 days
34 lines
1.3 KiB
Plaintext
34 lines
1.3 KiB
Plaintext
# $FreeBSD$
|
|
# $OpenBSD: ackpri,v 1.2 2003/03/10 14:24:33 henning Exp $
|
|
|
|
# Use a simple priority queue to prioritize empty (no payload) TCP ACKs,
|
|
# which dramatically improves throughput on (asymmetric) links when the
|
|
# reverse direction is saturated. The empty ACKs use an insignificant
|
|
# part of the bandwidth, but if they get delayed, downloads suffer
|
|
# badly, so prioritize them.
|
|
|
|
# Example: 512/128 kbps ADSL. Download is 50 kB/s. When a concurrent
|
|
# upload saturates the uplink, download drops to 7 kB/s. With the
|
|
# priority queue below, download drops only to 48 kB/s.
|
|
|
|
# Replace lo0 with your real external interface
|
|
|
|
ext_if="lo0"
|
|
|
|
# For a 512/128 kbps ADSL with PPPoE link, using "bandwidth 100Kb"
|
|
# is optimal. Some experimentation might be needed to find the best
|
|
# value. If it's set too high, the priority queue is not effective, and
|
|
# if it's set too low, the available bandwidth is not fully used.
|
|
# A good starting point would be real_uplink_bandwidth * 90 / 100.
|
|
|
|
altq on $ext_if priq bandwidth 100Kb queue { q_pri, q_def }
|
|
queue q_pri priority 7
|
|
queue q_def priority 1 priq(default)
|
|
|
|
pass out on $ext_if proto tcp from $ext_if to any flags S/SA \
|
|
keep state queue (q_def, q_pri)
|
|
|
|
pass in on $ext_if proto tcp from any to $ext_if flags S/SA \
|
|
keep state queue (q_def, q_pri)
|
|
|