acd760988d
doesn't make sense. Rewrite to what was intended. Correctly warned about by: GCC Approved by: re (bmah)
509 lines
13 KiB
C
509 lines
13 KiB
C
/*-
|
|
* Copyright (c) 1991 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* William Jolitz.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: @(#)isa.c 7.2 (Berkeley) 5/13/91
|
|
* from: isa_dma.c,v 1.3 1999/05/09 23:56:00 peter Exp $
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* code to manage AT bus
|
|
*
|
|
* 92/08/18 Frank P. MacLachlan (fpm@crash.cts.com):
|
|
* Fixed uninitialized variable problem and added code to deal
|
|
* with DMA page boundaries in isa_dmarangecheck(). Fixed word
|
|
* mode DMA count compution and reorganized DMA setup code in
|
|
* isa_dmastart()
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/bus.h>
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_param.h>
|
|
#include <vm/pmap.h>
|
|
#include <isa/isareg.h>
|
|
#include <isa/isavar.h>
|
|
#include <isa/isa_dmareg.h>
|
|
#include <machine/bus.h>
|
|
|
|
static bus_dma_tag_t dma_tag[8];
|
|
static bus_dmamap_t dma_map[8];
|
|
static u_int8_t dma_busy = 0; /* Used in isa_dmastart() */
|
|
static u_int8_t dma_inuse = 0; /* User for acquire/release */
|
|
static u_int8_t dma_auto_mode = 0;
|
|
static u_int8_t dma_bounced = 0;
|
|
|
|
#define VALID_DMA_MASK (7)
|
|
|
|
/* high byte of address is stored in this port for i-th dma channel */
|
|
static int dmapageport[8] = { 0x87, 0x83, 0x81, 0x82, 0x8f, 0x8b, 0x89, 0x8a };
|
|
|
|
/*
|
|
* Setup a DMA channel's bounce buffer.
|
|
*/
|
|
int
|
|
isa_dma_init(int chan, u_int bouncebufsize, int flag __unused)
|
|
{
|
|
static int initted = 0;
|
|
bus_addr_t boundary = chan >= 4 ? 0x20000 : 0x10000;
|
|
|
|
if (!initted) {
|
|
/*
|
|
* Reset the DMA hardware.
|
|
*/
|
|
outb(DMA1_RESET, 0);
|
|
outb(DMA2_RESET, 0);
|
|
isa_dmacascade(4);
|
|
|
|
initted = 1;
|
|
}
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (chan & ~VALID_DMA_MASK)
|
|
panic("isa_dma_init: channel out of range");
|
|
|
|
if (dma_tag[chan] || dma_map[chan])
|
|
panic("isa_dma_init: impossible request");
|
|
#endif
|
|
|
|
if (bus_dma_tag_create(/*parent*/NULL,
|
|
/*alignment*/2,
|
|
/*boundary*/boundary,
|
|
/*lowaddr*/BUS_SPACE_MAXADDR_24BIT,
|
|
/*highaddr*/BUS_SPACE_MAXADDR,
|
|
/*filter*/NULL, /*filterarg*/NULL,
|
|
/*maxsize*/bouncebufsize,
|
|
/*nsegments*/1, /*maxsegz*/0x3ffff,
|
|
/*flags*/BUS_DMA_ISA,
|
|
/*lockfunc*/busdma_lock_mutex,
|
|
/*lockarg*/&Giant,
|
|
&dma_tag[chan]) != 0) {
|
|
panic("isa_dma_init: unable to create dma tag\n");
|
|
}
|
|
|
|
if (bus_dmamap_create(dma_tag[chan], 0, &dma_map[chan])) {
|
|
panic("isa_dma_init: unable to create dma map\n");
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Register a DMA channel's usage. Usually called from a device driver
|
|
* in open() or during its initialization.
|
|
*/
|
|
int
|
|
isa_dma_acquire(chan)
|
|
int chan;
|
|
{
|
|
#ifdef DIAGNOSTIC
|
|
if (chan & ~VALID_DMA_MASK)
|
|
panic("isa_dma_acquire: channel out of range");
|
|
#endif
|
|
|
|
if (dma_inuse & (1 << chan)) {
|
|
printf("isa_dma_acquire: channel %d already in use\n", chan);
|
|
return (EBUSY);
|
|
}
|
|
dma_inuse |= (1 << chan);
|
|
dma_auto_mode &= ~(1 << chan);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Unregister a DMA channel's usage. Usually called from a device driver
|
|
* during close() or during its shutdown.
|
|
*/
|
|
void
|
|
isa_dma_release(chan)
|
|
int chan;
|
|
{
|
|
#ifdef DIAGNOSTIC
|
|
if (chan & ~VALID_DMA_MASK)
|
|
panic("isa_dma_release: channel out of range");
|
|
|
|
if ((dma_inuse & (1 << chan)) == 0)
|
|
printf("isa_dma_release: channel %d not in use\n", chan);
|
|
#endif
|
|
|
|
if (dma_busy & (1 << chan)) {
|
|
dma_busy &= ~(1 << chan);
|
|
/*
|
|
* XXX We should also do "dma_bounced &= (1 << chan);"
|
|
* because we are acting on behalf of isa_dmadone() which
|
|
* was not called to end the last DMA operation. This does
|
|
* not matter now, but it may in the future.
|
|
*/
|
|
}
|
|
|
|
dma_inuse &= ~(1 << chan);
|
|
dma_auto_mode &= ~(1 << chan);
|
|
}
|
|
|
|
/*
|
|
* isa_dmacascade(): program 8237 DMA controller channel to accept
|
|
* external dma control by a board.
|
|
*/
|
|
void
|
|
isa_dmacascade(chan)
|
|
int chan;
|
|
{
|
|
#ifdef DIAGNOSTIC
|
|
if (chan & ~VALID_DMA_MASK)
|
|
panic("isa_dmacascade: channel out of range");
|
|
#endif
|
|
|
|
/* set dma channel mode, and set dma channel mode */
|
|
if ((chan & 4) == 0) {
|
|
outb(DMA1_MODE, DMA37MD_CASCADE | chan);
|
|
outb(DMA1_SMSK, chan);
|
|
} else {
|
|
outb(DMA2_MODE, DMA37MD_CASCADE | (chan & 3));
|
|
outb(DMA2_SMSK, chan & 3);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* isa_dmastart(): program 8237 DMA controller channel.
|
|
*/
|
|
|
|
struct isa_dmastart_arg {
|
|
caddr_t addr;
|
|
int chan;
|
|
int flags;
|
|
};
|
|
|
|
static void isa_dmastart_cb(void *arg, bus_dma_segment_t *segs, int nseg,
|
|
int error)
|
|
{
|
|
#if 0
|
|
caddr_t addr = ((struct isa_dmastart_arg *) arg)->addr;
|
|
#endif
|
|
int chan = ((struct isa_dmastart_arg *) arg)->chan;
|
|
int flags = ((struct isa_dmastart_arg *) arg)->flags;
|
|
bus_addr_t phys = segs->ds_addr;
|
|
int nbytes = segs->ds_len;
|
|
int waport;
|
|
|
|
if (nseg != 1)
|
|
panic("isa_dmastart: transfer mapping not contiguous");
|
|
|
|
#if 0
|
|
if ((chipset.sgmap == NULL) &&
|
|
(pmap_extract(kernel_pmap, (vm_offset_t)addr)
|
|
> BUS_SPACE_MAXADDR_24BIT)) {
|
|
/* we bounced */
|
|
dma_bounced |= (1 << chan);
|
|
/* copy bounce buffer on write */
|
|
if (!(flags & ISADMA_READ))
|
|
bus_dmamap_sync(dma_tag[chan], dma_map[chan],
|
|
BUS_DMASYNC_PREWRITE);
|
|
}
|
|
#endif
|
|
|
|
if ((chan & 4) == 0) {
|
|
/*
|
|
* Program one of DMA channels 0..3. These are
|
|
* byte mode channels.
|
|
*/
|
|
/* set dma channel mode, and reset address ff */
|
|
|
|
/* If ISADMA_RAW flag is set, then use autoinitialise mode */
|
|
if (flags & ISADMA_RAW) {
|
|
if (flags & ISADMA_READ)
|
|
outb(DMA1_MODE, DMA37MD_AUTO|DMA37MD_WRITE|chan);
|
|
else
|
|
outb(DMA1_MODE, DMA37MD_AUTO|DMA37MD_READ|chan);
|
|
}
|
|
else
|
|
if (flags & ISADMA_READ)
|
|
outb(DMA1_MODE, DMA37MD_SINGLE|DMA37MD_WRITE|chan);
|
|
else
|
|
outb(DMA1_MODE, DMA37MD_SINGLE|DMA37MD_READ|chan);
|
|
outb(DMA1_FFC, 0);
|
|
|
|
/* send start address */
|
|
waport = DMA1_CHN(chan);
|
|
outb(waport, phys);
|
|
outb(waport, phys>>8);
|
|
outb(dmapageport[chan], phys>>16);
|
|
|
|
/* send count */
|
|
outb(waport + 1, --nbytes);
|
|
outb(waport + 1, nbytes>>8);
|
|
|
|
/* unmask channel */
|
|
outb(DMA1_SMSK, chan);
|
|
} else {
|
|
/*
|
|
* Program one of DMA channels 4..7. These are
|
|
* word mode channels.
|
|
*/
|
|
/* set dma channel mode, and reset address ff */
|
|
|
|
/* If ISADMA_RAW flag is set, then use autoinitialise mode */
|
|
if (flags & ISADMA_RAW) {
|
|
if (flags & ISADMA_READ)
|
|
outb(DMA2_MODE, DMA37MD_AUTO|DMA37MD_WRITE|(chan&3));
|
|
else
|
|
outb(DMA2_MODE, DMA37MD_AUTO|DMA37MD_READ|(chan&3));
|
|
}
|
|
else
|
|
if (flags & ISADMA_READ)
|
|
outb(DMA2_MODE, DMA37MD_SINGLE|DMA37MD_WRITE|(chan&3));
|
|
else
|
|
outb(DMA2_MODE, DMA37MD_SINGLE|DMA37MD_READ|(chan&3));
|
|
outb(DMA2_FFC, 0);
|
|
|
|
/* send start address */
|
|
waport = DMA2_CHN(chan - 4);
|
|
outb(waport, phys>>1);
|
|
outb(waport, phys>>9);
|
|
outb(dmapageport[chan], phys>>16);
|
|
|
|
/* send count */
|
|
nbytes >>= 1;
|
|
outb(waport + 2, --nbytes);
|
|
outb(waport + 2, nbytes>>8);
|
|
|
|
/* unmask channel */
|
|
outb(DMA2_SMSK, chan & 3);
|
|
}
|
|
}
|
|
|
|
void
|
|
isa_dmastart(int flags, caddr_t addr, u_int nbytes, int chan)
|
|
{
|
|
struct isa_dmastart_arg args;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (chan & ~VALID_DMA_MASK)
|
|
panic("isa_dmastart: channel out of range");
|
|
|
|
if ((chan < 4 && nbytes > (1<<16))
|
|
|| (chan >= 4 && (nbytes > (1<<17) || (uintptr_t)addr & 1)))
|
|
panic("isa_dmastart: impossible request");
|
|
|
|
if ((dma_inuse & (1 << chan)) == 0)
|
|
printf("isa_dmastart: channel %d not acquired\n", chan);
|
|
#endif
|
|
|
|
#if 0
|
|
/*
|
|
* XXX This should be checked, but drivers like ad1848 only call
|
|
* isa_dmastart() once because they use Auto DMA mode. If we
|
|
* leave this in, drivers that do this will print this continuously.
|
|
*/
|
|
if (dma_busy & (1 << chan))
|
|
printf("isa_dmastart: channel %d busy\n", chan);
|
|
#endif
|
|
|
|
if (!dma_tag[chan] || !dma_map[chan])
|
|
panic("isa_dmastart: called without isa_dma_init");
|
|
|
|
dma_busy |= (1 << chan);
|
|
|
|
if (flags & ISADMA_RAW) {
|
|
dma_auto_mode |= (1 << chan);
|
|
} else {
|
|
dma_auto_mode &= ~(1 << chan);
|
|
}
|
|
|
|
/*
|
|
* Freeze dma while updating registers.
|
|
*/
|
|
outb(chan & 4 ? DMA2_SMSK : DMA1_SMSK, (chan & 3) | 4);
|
|
|
|
args.addr = addr;
|
|
args.chan = chan;
|
|
args.flags = flags;
|
|
bus_dmamap_load(dma_tag[chan], dma_map[chan], addr, nbytes,
|
|
isa_dmastart_cb, &args, 0);
|
|
}
|
|
|
|
void
|
|
isa_dmadone(int flags, caddr_t addr, int nbytes, int chan)
|
|
{
|
|
#ifdef DIAGNOSTIC
|
|
if (chan & ~VALID_DMA_MASK)
|
|
panic("isa_dmadone: channel out of range");
|
|
|
|
if ((dma_inuse & (1 << chan)) == 0)
|
|
printf("isa_dmadone: channel %d not acquired\n", chan);
|
|
#endif
|
|
|
|
if (((dma_busy & (1 << chan)) == 0) &&
|
|
(dma_auto_mode & (1 << chan)) == 0 )
|
|
printf("isa_dmadone: channel %d not busy\n", chan);
|
|
|
|
if (dma_bounced & (1 << chan)) {
|
|
/* copy bounce buffer on read */
|
|
if (flags & ISADMA_READ) {
|
|
bus_dmamap_sync(dma_tag[chan], dma_map[chan],
|
|
BUS_DMASYNC_POSTREAD);
|
|
}
|
|
dma_bounced &= ~(1 << chan);
|
|
}
|
|
|
|
if ((dma_auto_mode & (1 << chan)) == 0) {
|
|
outb(chan & 4 ? DMA2_SMSK : DMA1_SMSK, (chan & 3) | 4);
|
|
bus_dmamap_unload(dma_tag[chan], dma_map[chan]);
|
|
}
|
|
|
|
dma_busy &= ~(1 << chan);
|
|
}
|
|
|
|
/*
|
|
* Query the progress of a transfer on a DMA channel.
|
|
*
|
|
* To avoid having to interrupt a transfer in progress, we sample
|
|
* each of the high and low databytes twice, and apply the following
|
|
* logic to determine the correct count.
|
|
*
|
|
* Reads are performed with interrupts disabled, thus it is to be
|
|
* expected that the time between reads is very small. At most
|
|
* one rollover in the low count byte can be expected within the
|
|
* four reads that are performed.
|
|
*
|
|
* There are three gaps in which a rollover can occur :
|
|
*
|
|
* - read low1
|
|
* gap1
|
|
* - read high1
|
|
* gap2
|
|
* - read low2
|
|
* gap3
|
|
* - read high2
|
|
*
|
|
* If a rollover occurs in gap1 or gap2, the low2 value will be
|
|
* greater than the low1 value. In this case, low2 and high2 are a
|
|
* corresponding pair.
|
|
*
|
|
* In any other case, low1 and high1 can be considered to be correct.
|
|
*
|
|
* The function returns the number of bytes remaining in the transfer,
|
|
* or -1 if the channel requested is not active.
|
|
*
|
|
*/
|
|
int
|
|
isa_dmastatus(int chan)
|
|
{
|
|
u_long cnt = 0;
|
|
int ffport, waport;
|
|
u_long low1, high1, low2, high2;
|
|
int s;
|
|
|
|
/* channel active? */
|
|
if ((dma_inuse & (1 << chan)) == 0) {
|
|
printf("isa_dmastatus: channel %d not active\n", chan);
|
|
return(-1);
|
|
}
|
|
/* channel busy? */
|
|
|
|
if (((dma_busy & (1 << chan)) == 0) &&
|
|
(dma_auto_mode & (1 << chan)) == 0 ) {
|
|
printf("chan %d not busy\n", chan);
|
|
return -2 ;
|
|
}
|
|
if (chan < 4) { /* low DMA controller */
|
|
ffport = DMA1_FFC;
|
|
waport = DMA1_CHN(chan) + 1;
|
|
} else { /* high DMA controller */
|
|
ffport = DMA2_FFC;
|
|
waport = DMA2_CHN(chan - 4) + 2;
|
|
}
|
|
|
|
s = splhigh(); /* no interrupts Mr Jones! */
|
|
outb(ffport, 0); /* clear register LSB flipflop */
|
|
low1 = inb(waport);
|
|
high1 = inb(waport);
|
|
outb(ffport, 0); /* clear again */
|
|
low2 = inb(waport);
|
|
high2 = inb(waport);
|
|
splx(s); /* enable interrupts again */
|
|
|
|
/*
|
|
* Now decide if a wrap has tried to skew our results.
|
|
* Note that after TC, the count will read 0xffff, while we want
|
|
* to return zero, so we add and then mask to compensate.
|
|
*/
|
|
if (low1 >= low2) {
|
|
cnt = (low1 + (high1 << 8) + 1) & 0xffff;
|
|
} else {
|
|
cnt = (low2 + (high2 << 8) + 1) & 0xffff;
|
|
}
|
|
|
|
if (chan >= 4) /* high channels move words */
|
|
cnt *= 2;
|
|
return(cnt);
|
|
}
|
|
|
|
/*
|
|
* Reached terminal count yet ?
|
|
*/
|
|
int
|
|
isa_dmatc(int chan)
|
|
{
|
|
|
|
if (chan < 4)
|
|
return(inb(DMA1_STATUS) & (1 << chan));
|
|
else
|
|
return(inb(DMA2_STATUS) & (1 << (chan & 3)));
|
|
}
|
|
|
|
/*
|
|
* Stop a DMA transfer currently in progress.
|
|
*/
|
|
int
|
|
isa_dmastop(int chan)
|
|
{
|
|
if ((dma_inuse & (1 << chan)) == 0)
|
|
printf("isa_dmastop: channel %d not acquired\n", chan);
|
|
|
|
if (((dma_busy & (1 << chan)) == 0) &&
|
|
((dma_auto_mode & (1 << chan)) == 0)) {
|
|
printf("chan %d not busy\n", chan);
|
|
return -2 ;
|
|
}
|
|
|
|
if ((chan & 4) == 0) {
|
|
outb(DMA1_SMSK, (chan & 3) | 4 /* disable mask */);
|
|
} else {
|
|
outb(DMA2_SMSK, (chan & 3) | 4 /* disable mask */);
|
|
}
|
|
return(isa_dmastatus(chan));
|
|
}
|