freebsd-dev/sys/kern/kern_timeout.c
Ian Dowse 57c037be1c When processing a timeout() callout and returning it to the free
list, set `curr_callout' to NULL. This ensures that we won't attempt
to cancel the current callout if the original callout structure
gets recycled while we wait to acquire Giant.

This is reported to fix an intermittent syscons problem that was
introduced by revision 1.96.
2005-02-11 00:14:00 +00:00

659 lines
19 KiB
C

/*-
* Copyright (c) 1982, 1986, 1991, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* From: @(#)kern_clock.c 8.5 (Berkeley) 1/21/94
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/callout.h>
#include <sys/condvar.h>
#include <sys/kernel.h>
#include <sys/ktr.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/sysctl.h>
static int avg_depth;
SYSCTL_INT(_debug, OID_AUTO, to_avg_depth, CTLFLAG_RD, &avg_depth, 0,
"Average number of items examined per softclock call. Units = 1/1000");
static int avg_gcalls;
SYSCTL_INT(_debug, OID_AUTO, to_avg_gcalls, CTLFLAG_RD, &avg_gcalls, 0,
"Average number of Giant callouts made per softclock call. Units = 1/1000");
static int avg_mtxcalls;
SYSCTL_INT(_debug, OID_AUTO, to_avg_mtxcalls, CTLFLAG_RD, &avg_mtxcalls, 0,
"Average number of mtx callouts made per softclock call. Units = 1/1000");
static int avg_mpcalls;
SYSCTL_INT(_debug, OID_AUTO, to_avg_mpcalls, CTLFLAG_RD, &avg_mpcalls, 0,
"Average number of MP callouts made per softclock call. Units = 1/1000");
/*
* TODO:
* allocate more timeout table slots when table overflows.
*/
/* Exported to machdep.c and/or kern_clock.c. */
struct callout *callout;
struct callout_list callfree;
int callwheelsize, callwheelbits, callwheelmask;
struct callout_tailq *callwheel;
int softticks; /* Like ticks, but for softclock(). */
struct mtx callout_lock;
#ifdef DIAGNOSTIC
struct mtx dont_sleep_in_callout;
#endif
static struct callout *nextsoftcheck; /* Next callout to be checked. */
/**
* Locked by callout_lock:
* curr_callout - If a callout is in progress, it is curr_callout.
* If curr_callout is non-NULL, threads waiting on
* callout_wait will be woken up as soon as the
* relevant callout completes.
* curr_cancelled - Changing to 1 with both callout_lock and c_mtx held
* guarantees that the current callout will not run.
* The softclock() function sets this to 0 before it
* drops callout_lock to acquire c_mtx, and it calls
* the handler only if curr_cancelled still 0 when
* c_mtx is successfully acquired.
* wakeup_ctr - Incremented every time a thread wants to wait
* for a callout to complete. Modified only when
* curr_callout is non-NULL.
* wakeup_needed - If a thread is waiting on callout_wait, then
* wakeup_needed is nonzero. Increased only when
* cutt_callout is non-NULL.
*/
static struct callout *curr_callout;
static int curr_cancelled;
static int wakeup_ctr;
static int wakeup_needed;
/**
* Locked by callout_wait_lock:
* callout_wait - If wakeup_needed is set, callout_wait will be
* triggered after the current callout finishes.
* wakeup_done_ctr - Set to the current value of wakeup_ctr after
* callout_wait is triggered.
*/
static struct mtx callout_wait_lock;
static struct cv callout_wait;
static int wakeup_done_ctr;
/*
* kern_timeout_callwheel_alloc() - kernel low level callwheel initialization
*
* This code is called very early in the kernel initialization sequence,
* and may be called more then once.
*/
caddr_t
kern_timeout_callwheel_alloc(caddr_t v)
{
/*
* Calculate callout wheel size
*/
for (callwheelsize = 1, callwheelbits = 0;
callwheelsize < ncallout;
callwheelsize <<= 1, ++callwheelbits)
;
callwheelmask = callwheelsize - 1;
callout = (struct callout *)v;
v = (caddr_t)(callout + ncallout);
callwheel = (struct callout_tailq *)v;
v = (caddr_t)(callwheel + callwheelsize);
return(v);
}
/*
* kern_timeout_callwheel_init() - initialize previously reserved callwheel
* space.
*
* This code is called just once, after the space reserved for the
* callout wheel has been finalized.
*/
void
kern_timeout_callwheel_init(void)
{
int i;
SLIST_INIT(&callfree);
for (i = 0; i < ncallout; i++) {
callout_init(&callout[i], 0);
callout[i].c_flags = CALLOUT_LOCAL_ALLOC;
SLIST_INSERT_HEAD(&callfree, &callout[i], c_links.sle);
}
for (i = 0; i < callwheelsize; i++) {
TAILQ_INIT(&callwheel[i]);
}
mtx_init(&callout_lock, "callout", NULL, MTX_SPIN | MTX_RECURSE);
#ifdef DIAGNOSTIC
mtx_init(&dont_sleep_in_callout, "dont_sleep_in_callout", NULL, MTX_DEF);
#endif
mtx_init(&callout_wait_lock, "callout_wait_lock", NULL, MTX_DEF);
cv_init(&callout_wait, "callout_wait");
}
/*
* The callout mechanism is based on the work of Adam M. Costello and
* George Varghese, published in a technical report entitled "Redesigning
* the BSD Callout and Timer Facilities" and modified slightly for inclusion
* in FreeBSD by Justin T. Gibbs. The original work on the data structures
* used in this implementation was published by G. Varghese and T. Lauck in
* the paper "Hashed and Hierarchical Timing Wheels: Data Structures for
* the Efficient Implementation of a Timer Facility" in the Proceedings of
* the 11th ACM Annual Symposium on Operating Systems Principles,
* Austin, Texas Nov 1987.
*/
/*
* Software (low priority) clock interrupt.
* Run periodic events from timeout queue.
*/
void
softclock(void *dummy)
{
struct callout *c;
struct callout_tailq *bucket;
int curticks;
int steps; /* #steps since we last allowed interrupts */
int depth;
int mpcalls;
int mtxcalls;
int gcalls;
int wakeup_cookie;
#ifdef DIAGNOSTIC
struct bintime bt1, bt2;
struct timespec ts2;
static uint64_t maxdt = 36893488147419102LL; /* 2 msec */
static timeout_t *lastfunc;
#endif
#ifndef MAX_SOFTCLOCK_STEPS
#define MAX_SOFTCLOCK_STEPS 100 /* Maximum allowed value of steps. */
#endif /* MAX_SOFTCLOCK_STEPS */
mpcalls = 0;
mtxcalls = 0;
gcalls = 0;
depth = 0;
steps = 0;
mtx_lock_spin(&callout_lock);
while (softticks != ticks) {
softticks++;
/*
* softticks may be modified by hard clock, so cache
* it while we work on a given bucket.
*/
curticks = softticks;
bucket = &callwheel[curticks & callwheelmask];
c = TAILQ_FIRST(bucket);
while (c) {
depth++;
if (c->c_time != curticks) {
c = TAILQ_NEXT(c, c_links.tqe);
++steps;
if (steps >= MAX_SOFTCLOCK_STEPS) {
nextsoftcheck = c;
/* Give interrupts a chance. */
mtx_unlock_spin(&callout_lock);
; /* nothing */
mtx_lock_spin(&callout_lock);
c = nextsoftcheck;
steps = 0;
}
} else {
void (*c_func)(void *);
void *c_arg;
struct mtx *c_mtx;
int c_flags;
nextsoftcheck = TAILQ_NEXT(c, c_links.tqe);
TAILQ_REMOVE(bucket, c, c_links.tqe);
c_func = c->c_func;
c_arg = c->c_arg;
c_mtx = c->c_mtx;
c_flags = c->c_flags;
if (c->c_flags & CALLOUT_LOCAL_ALLOC) {
c->c_func = NULL;
c->c_flags = CALLOUT_LOCAL_ALLOC;
SLIST_INSERT_HEAD(&callfree, c,
c_links.sle);
curr_callout = NULL;
} else {
c->c_flags =
(c->c_flags & ~CALLOUT_PENDING);
curr_callout = c;
}
curr_cancelled = 0;
mtx_unlock_spin(&callout_lock);
if (c_mtx != NULL) {
mtx_lock(c_mtx);
/*
* The callout may have been cancelled
* while we switched locks.
*/
if (curr_cancelled) {
mtx_unlock(c_mtx);
mtx_lock_spin(&callout_lock);
goto done_locked;
}
/* The callout cannot be stopped now. */
curr_cancelled = 1;
if (c_mtx == &Giant) {
gcalls++;
CTR1(KTR_CALLOUT, "callout %p",
c_func);
} else {
mtxcalls++;
CTR1(KTR_CALLOUT,
"callout mtx %p",
c_func);
}
} else {
mpcalls++;
CTR1(KTR_CALLOUT, "callout mpsafe %p",
c_func);
}
#ifdef DIAGNOSTIC
binuptime(&bt1);
mtx_lock(&dont_sleep_in_callout);
#endif
c_func(c_arg);
#ifdef DIAGNOSTIC
mtx_unlock(&dont_sleep_in_callout);
binuptime(&bt2);
bintime_sub(&bt2, &bt1);
if (bt2.frac > maxdt) {
if (lastfunc != c_func ||
bt2.frac > maxdt * 2) {
bintime2timespec(&bt2, &ts2);
printf(
"Expensive timeout(9) function: %p(%p) %jd.%09ld s\n",
c_func, c_arg,
(intmax_t)ts2.tv_sec,
ts2.tv_nsec);
}
maxdt = bt2.frac;
lastfunc = c_func;
}
#endif
if ((c_flags & CALLOUT_RETURNUNLOCKED) == 0)
mtx_unlock(c_mtx);
mtx_lock_spin(&callout_lock);
done_locked:
curr_callout = NULL;
if (wakeup_needed) {
/*
* There might be someone waiting
* for the callout to complete.
*/
wakeup_cookie = wakeup_ctr;
mtx_unlock_spin(&callout_lock);
mtx_lock(&callout_wait_lock);
cv_broadcast(&callout_wait);
wakeup_done_ctr = wakeup_cookie;
mtx_unlock(&callout_wait_lock);
mtx_lock_spin(&callout_lock);
wakeup_needed = 0;
}
steps = 0;
c = nextsoftcheck;
}
}
}
avg_depth += (depth * 1000 - avg_depth) >> 8;
avg_mpcalls += (mpcalls * 1000 - avg_mpcalls) >> 8;
avg_mtxcalls += (mtxcalls * 1000 - avg_mtxcalls) >> 8;
avg_gcalls += (gcalls * 1000 - avg_gcalls) >> 8;
nextsoftcheck = NULL;
mtx_unlock_spin(&callout_lock);
}
/*
* timeout --
* Execute a function after a specified length of time.
*
* untimeout --
* Cancel previous timeout function call.
*
* callout_handle_init --
* Initialize a handle so that using it with untimeout is benign.
*
* See AT&T BCI Driver Reference Manual for specification. This
* implementation differs from that one in that although an
* identification value is returned from timeout, the original
* arguments to timeout as well as the identifier are used to
* identify entries for untimeout.
*/
struct callout_handle
timeout(ftn, arg, to_ticks)
timeout_t *ftn;
void *arg;
int to_ticks;
{
struct callout *new;
struct callout_handle handle;
mtx_lock_spin(&callout_lock);
/* Fill in the next free callout structure. */
new = SLIST_FIRST(&callfree);
if (new == NULL)
/* XXX Attempt to malloc first */
panic("timeout table full");
SLIST_REMOVE_HEAD(&callfree, c_links.sle);
callout_reset(new, to_ticks, ftn, arg);
handle.callout = new;
mtx_unlock_spin(&callout_lock);
return (handle);
}
void
untimeout(ftn, arg, handle)
timeout_t *ftn;
void *arg;
struct callout_handle handle;
{
/*
* Check for a handle that was initialized
* by callout_handle_init, but never used
* for a real timeout.
*/
if (handle.callout == NULL)
return;
mtx_lock_spin(&callout_lock);
if (handle.callout->c_func == ftn && handle.callout->c_arg == arg)
callout_stop(handle.callout);
mtx_unlock_spin(&callout_lock);
}
void
callout_handle_init(struct callout_handle *handle)
{
handle->callout = NULL;
}
/*
* New interface; clients allocate their own callout structures.
*
* callout_reset() - establish or change a timeout
* callout_stop() - disestablish a timeout
* callout_init() - initialize a callout structure so that it can
* safely be passed to callout_reset() and callout_stop()
*
* <sys/callout.h> defines three convenience macros:
*
* callout_active() - returns truth if callout has not been stopped,
* drained, or deactivated since the last time the callout was
* reset.
* callout_pending() - returns truth if callout is still waiting for timeout
* callout_deactivate() - marks the callout as having been serviced
*/
void
callout_reset(c, to_ticks, ftn, arg)
struct callout *c;
int to_ticks;
void (*ftn)(void *);
void *arg;
{
#ifdef notyet /* Some callers of timeout() do not hold Giant. */
if (c->c_mtx != NULL)
mtx_assert(c->c_mtx, MA_OWNED);
#endif
mtx_lock_spin(&callout_lock);
if (c == curr_callout) {
/*
* We're being asked to reschedule a callout which is
* currently in progress. If there is a mutex then we
* can cancel the callout if it has not really started.
*/
if (c->c_mtx != NULL && !curr_cancelled)
curr_cancelled = 1;
if (wakeup_needed) {
/*
* Someone has called callout_drain to kill this
* callout. Don't reschedule.
*/
mtx_unlock_spin(&callout_lock);
return;
}
}
if (c->c_flags & CALLOUT_PENDING) {
if (nextsoftcheck == c) {
nextsoftcheck = TAILQ_NEXT(c, c_links.tqe);
}
TAILQ_REMOVE(&callwheel[c->c_time & callwheelmask], c,
c_links.tqe);
/*
* Part of the normal "stop a pending callout" process
* is to clear the CALLOUT_ACTIVE and CALLOUT_PENDING
* flags. We're not going to bother doing that here,
* because we're going to be setting those flags ten lines
* after this point, and we're holding callout_lock
* between now and then.
*/
}
/*
* We could unlock callout_lock here and lock it again before the
* TAILQ_INSERT_TAIL, but there's no point since doing this setup
* doesn't take much time.
*/
if (to_ticks <= 0)
to_ticks = 1;
c->c_arg = arg;
c->c_flags |= (CALLOUT_ACTIVE | CALLOUT_PENDING);
c->c_func = ftn;
c->c_time = ticks + to_ticks;
TAILQ_INSERT_TAIL(&callwheel[c->c_time & callwheelmask],
c, c_links.tqe);
mtx_unlock_spin(&callout_lock);
}
int
_callout_stop_safe(c, safe)
struct callout *c;
int safe;
{
int use_mtx, wakeup_cookie;
if (!safe && c->c_mtx != NULL) {
#ifdef notyet /* Some callers do not hold Giant for Giant-locked callouts. */
mtx_assert(c->c_mtx, MA_OWNED);
use_mtx = 1;
#else
use_mtx = mtx_owned(c->c_mtx);
#endif
} else {
use_mtx = 0;
}
mtx_lock_spin(&callout_lock);
/*
* Don't attempt to delete a callout that's not on the queue.
*/
if (!(c->c_flags & CALLOUT_PENDING)) {
c->c_flags &= ~CALLOUT_ACTIVE;
if (c != curr_callout) {
mtx_unlock_spin(&callout_lock);
return (0);
}
if (safe) {
/* We need to wait until the callout is finished. */
wakeup_needed = 1;
wakeup_cookie = wakeup_ctr++;
mtx_unlock_spin(&callout_lock);
mtx_lock(&callout_wait_lock);
/*
* Check to make sure that softclock() didn't
* do the wakeup in between our dropping
* callout_lock and picking up callout_wait_lock
*/
if (wakeup_cookie - wakeup_done_ctr > 0)
cv_wait(&callout_wait, &callout_wait_lock);
mtx_unlock(&callout_wait_lock);
} else if (use_mtx && !curr_cancelled) {
/* We can stop the callout before it runs. */
curr_cancelled = 1;
mtx_unlock_spin(&callout_lock);
return (1);
} else
mtx_unlock_spin(&callout_lock);
return (0);
}
c->c_flags &= ~(CALLOUT_ACTIVE | CALLOUT_PENDING);
if (nextsoftcheck == c) {
nextsoftcheck = TAILQ_NEXT(c, c_links.tqe);
}
TAILQ_REMOVE(&callwheel[c->c_time & callwheelmask], c, c_links.tqe);
if (c->c_flags & CALLOUT_LOCAL_ALLOC) {
c->c_func = NULL;
SLIST_INSERT_HEAD(&callfree, c, c_links.sle);
}
mtx_unlock_spin(&callout_lock);
return (1);
}
void
callout_init(c, mpsafe)
struct callout *c;
int mpsafe;
{
bzero(c, sizeof *c);
if (mpsafe) {
c->c_mtx = NULL;
c->c_flags = CALLOUT_RETURNUNLOCKED;
} else {
c->c_mtx = &Giant;
c->c_flags = 0;
}
}
void
callout_init_mtx(c, mtx, flags)
struct callout *c;
struct mtx *mtx;
int flags;
{
bzero(c, sizeof *c);
c->c_mtx = mtx;
KASSERT((flags & ~CALLOUT_RETURNUNLOCKED) == 0,
("callout_init_mtx: bad flags %d", flags));
/* CALLOUT_RETURNUNLOCKED makes no sense without a mutex. */
KASSERT(mtx != NULL || (flags & CALLOUT_RETURNUNLOCKED) == 0,
("callout_init_mtx: CALLOUT_RETURNUNLOCKED with no mutex"));
c->c_flags = flags & CALLOUT_RETURNUNLOCKED;
}
#ifdef APM_FIXUP_CALLTODO
/*
* Adjust the kernel calltodo timeout list. This routine is used after
* an APM resume to recalculate the calltodo timer list values with the
* number of hz's we have been sleeping. The next hardclock() will detect
* that there are fired timers and run softclock() to execute them.
*
* Please note, I have not done an exhaustive analysis of what code this
* might break. I am motivated to have my select()'s and alarm()'s that
* have expired during suspend firing upon resume so that the applications
* which set the timer can do the maintanence the timer was for as close
* as possible to the originally intended time. Testing this code for a
* week showed that resuming from a suspend resulted in 22 to 25 timers
* firing, which seemed independant on whether the suspend was 2 hours or
* 2 days. Your milage may vary. - Ken Key <key@cs.utk.edu>
*/
void
adjust_timeout_calltodo(time_change)
struct timeval *time_change;
{
register struct callout *p;
unsigned long delta_ticks;
/*
* How many ticks were we asleep?
* (stolen from tvtohz()).
*/
/* Don't do anything */
if (time_change->tv_sec < 0)
return;
else if (time_change->tv_sec <= LONG_MAX / 1000000)
delta_ticks = (time_change->tv_sec * 1000000 +
time_change->tv_usec + (tick - 1)) / tick + 1;
else if (time_change->tv_sec <= LONG_MAX / hz)
delta_ticks = time_change->tv_sec * hz +
(time_change->tv_usec + (tick - 1)) / tick + 1;
else
delta_ticks = LONG_MAX;
if (delta_ticks > INT_MAX)
delta_ticks = INT_MAX;
/*
* Now rip through the timer calltodo list looking for timers
* to expire.
*/
/* don't collide with softclock() */
mtx_lock_spin(&callout_lock);
for (p = calltodo.c_next; p != NULL; p = p->c_next) {
p->c_time -= delta_ticks;
/* Break if the timer had more time on it than delta_ticks */
if (p->c_time > 0)
break;
/* take back the ticks the timer didn't use (p->c_time <= 0) */
delta_ticks = -p->c_time;
}
mtx_unlock_spin(&callout_lock);
return;
}
#endif /* APM_FIXUP_CALLTODO */