9faa4e6750
Folks - please review these! I'm quite sleepy at the moment, and I'm sure that some of this could be worded better. I'd like to have at least a reasonable syntax pass over this before handing it off to the translation folks! Thanks! Feel free to commit any changes directly if it's any time in the next 8 hours, BTW. I won't mind since I'll be asleep!
58 lines
2.9 KiB
Plaintext
58 lines
2.9 KiB
Plaintext
You can do network installations over 3 types of communications links:
|
|
|
|
Serial port: SLIP / PPP
|
|
|
|
Parallel port: PLIP (laplink cable)
|
|
|
|
Ethernet: A standard ethernet controller (includes some PCMCIA).
|
|
|
|
|
|
SLIP support is rather primitive, and limited primarily to hard-wired
|
|
links, such as a serial cable running between a laptop computer and
|
|
another computer. The link should be hard-wired as the SLIP
|
|
installation doesn't currently offer a dialing capability; that
|
|
facility is provided with the PPP utility, which should be used in
|
|
preference to SLIP whenever possible. When you choose a serial port
|
|
device, you'll be given the option later to edit the slattach command
|
|
before it's run on the serial line. It is expected that you'll run
|
|
slattach (or some equivalent) on the other end of the link at this
|
|
time and bring up the line. FreeBSD will then install itself over the
|
|
serial line at speeds of up to 115.2K/baud (the recommended speed for
|
|
a hardwired cable).
|
|
|
|
If you're using a modem, then PPP is almost certainly your only
|
|
choice. Make sure that you have your service provider's information
|
|
handy as you'll need to know it fairly soon in the installation
|
|
process. You will need to know, at the minimum, your service
|
|
provider's IP address and possibly your own (though you can also leave
|
|
it blank and allow PPP to negotiate it with your ISP). You also need
|
|
to know how to use the various "AT commands" to dial the ISP with your
|
|
particular modem as the PPP dialer provides only a very simple
|
|
terminal emulator.
|
|
|
|
If a hard-wired connection to another FreeBSD (2.0R or later) machine
|
|
is available, you might also consider installing over a "laplink"
|
|
parallel port cable. The data rate over the parallel port is much
|
|
higher than is what's typically possible over a serial line (up to
|
|
50k/sec), thus resulting in a quicker installation.
|
|
|
|
Finally, for the fastest possible installation, an ethernet adaptor is
|
|
always a good choice! FreeBSD supports most common PC ethernet cards,
|
|
a table of supported cards (and their required settings) provided as
|
|
part of the FreeBSD Hardware Guide - see the Documentation menu on the
|
|
boot floppy. If you are using one of the supported PCMCIA ethernet
|
|
cards, also be sure that it's plugged in _before_ the laptop is
|
|
powered on! FreeBSD does not, unfortunately, currently support "hot
|
|
insertion" of PCMCIA cards.
|
|
|
|
You will also need to know your IP address on the network, the the
|
|
"netmask" value for your address class and the name of your machine.
|
|
Your system administrator can tell you which values to use for your
|
|
particular network setup. If you will be referring to other hosts by
|
|
name rather than IP address, you'll also need a name server and
|
|
possibly the address of a gateway (if you're using PPP, it's your
|
|
provider's IP address) to use in talking to it. If you do not know
|
|
the answers to all or or most of these questions, then you should
|
|
really probably talk to your system administrator _first_ before
|
|
trying this type of installation!
|