219 lines
11 KiB
Bash
219 lines
11 KiB
Bash
#!/bin/sh
|
|
#
|
|
|
|
# This is rc.conf - a file full of useful variables that you can set
|
|
# to change the default startup behavior of your system. You should
|
|
# not edit this file! Put any overrides into one of the ${rc_conf_files}
|
|
# instead and you will be able to update these defaults later without
|
|
# spamming your local configuration information.
|
|
#
|
|
# All arguments must be in double or single quotes.
|
|
#
|
|
# $Id: rc.conf,v 1.4 1999/03/17 04:00:04 billf Exp $
|
|
|
|
##############################################################
|
|
### Important initial Boot-time options #####################
|
|
##############################################################
|
|
|
|
swapfile="NO" # Set to name of swapfile if aux swapfile desired.
|
|
apm_enable="NO" # Set to YES if you want APM enabled.
|
|
pccard_enable="NO" # Set to YES if you want to configure PCCARD devices.
|
|
pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
|
|
pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
|
|
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
|
|
local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs
|
|
rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
|
|
|
|
##############################################################
|
|
### Network configuration sub-section ######################
|
|
##############################################################
|
|
|
|
### Basic network options: ###
|
|
hostname="myname.my.domain" # Set this!
|
|
nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
|
|
firewall_enable="NO" # Set to YES to enable firewall functionality
|
|
firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
|
|
firewall_quiet="NO" # Set to YES to suppress rule display
|
|
natd_program="/sbin/natd" # path to natd, if you want a different one.
|
|
natd_enable="NO" # Enable natd (if firewall_enable == YES).
|
|
natd_interface="fxp0" # Public interface or IPaddress to use.
|
|
natd_flags="" # Additional flags for natd.
|
|
tcp_extensions="NO" # Disallow RFC1323 extensions (or YES).
|
|
network_interfaces="lo0" # List of network interfaces (lo0 is loopback).
|
|
ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
|
|
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
|
|
#
|
|
# If you have any sppp(4) interfaces above, you might also want to set
|
|
# the following parameters. Refer to spppcontrol(8) for their meaning.
|
|
sppp_interfaces="" # List of sppp interfaces.
|
|
#sppp_interfaces="isp0" # example: sppp over ISDN
|
|
#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
|
|
|
|
### Network daemon (miscellaneous) & NFS options: ###
|
|
syslogd_enable="YES" # Run syslog daemon (or NO).
|
|
syslogd_flags="" # Flags to syslogd (if enabled).
|
|
inetd_enable="YES" # Run the network daemon dispatcher (or NO).
|
|
inetd_flags="" # Optional flags to inetd.
|
|
#
|
|
# named. It may be possible to run named in a sandbox, man security for
|
|
# details.
|
|
#
|
|
named_enable="NO" # Run named, the DNS server (or NO).
|
|
named_program="named" # path to named, if you want a different one.
|
|
named_flags="" # Flags for named
|
|
#named_flags="-u bind -g bind" # Flags for named
|
|
|
|
kerberos_server_enable="NO" # Run a kerberos master server (or NO).
|
|
kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on
|
|
# a slave kerberos server
|
|
kerberos_stash="" # Is the kerberos master key stashed?
|
|
rwhod_enable="NO" # Run the rwho daemon (or NO).
|
|
rwhod_flags="" # Flags for rwhod
|
|
amd_enable="NO" # Run amd service with $amd_flags (or NO).
|
|
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
|
|
amd_map_program="NO" # Can be set to "ypcat -k amd.master"
|
|
nfs_client_enable="NO" # This host is an NFS client (or NO).
|
|
nfs_client_flags="-n 4" # Flags to nfsiod (if enabled).
|
|
nfs_access_cache="2" # Client cache timeout in seconds
|
|
nfs_server_enable="NO" # This host is an NFS server (or NO).
|
|
nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
|
|
mountd_flags="-r" # Flags to mountd (if NFS server enabled).
|
|
nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
|
|
rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server.
|
|
rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO).
|
|
portmap_enable="YES" # Run the portmapper service (or NO).
|
|
portmap_program="/usr/sbin/portmap" # path to portmap, if you want a different one.
|
|
portmap_flags="" # Flags to portmap (if enabled).
|
|
rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
|
|
keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
|
|
keyserv_flags="" # Flags to keyserv (if enabled).
|
|
rarpd_enable="NO" # Run rarpd (or NO).
|
|
rarpd_flags="" # Flags to rarpd.
|
|
xtend_enable="NO" # Run the X-10 power controller daemon.
|
|
xtend_flags="" # Flags to xtend (if enabled).
|
|
|
|
### Network Time Services options: ###
|
|
timed_enable="NO" # Run the time daemon (or NO).
|
|
timed_flags="" # Flags to timed (if enabled).
|
|
ntpdate_enable="NO" # Run the ntpdate to sync time (or NO).
|
|
ntpdate_program="ntpdate" # path to ntpdate, if you want a different one.
|
|
ntpdate_flags="" # Flags to ntpdate (if enabled).
|
|
xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO).
|
|
xntpd_program="xntpd" # path to xntpd, if you want a different one.
|
|
xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled).
|
|
|
|
# Network Information Services (NIS) options: ###
|
|
nis_client_enable="NO" # We're an NIS client (or NO).
|
|
nis_client_flags="" # Flags to ypbind (if enabled).
|
|
nis_ypset_enable="NO" # Run ypset at boot time (or NO).
|
|
nis_ypset_flags="" # Flags to ypset (if enabled).
|
|
nis_server_enable="NO" # We're an NIS server (or NO).
|
|
nis_server_flags="" # Flags to ypserv (if enabled).
|
|
nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
|
|
nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
|
|
nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
|
|
nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
|
|
|
|
### Network routing options: ###
|
|
defaultrouter="NO" # Set to default gateway (or NO).
|
|
static_routes="" # Set to static route list (or leave empty).
|
|
gateway_enable="NO" # Set to YES if this host will be a gateway.
|
|
router_enable="NO" # Set to YES to enable a routing daemon.
|
|
router="routed" # Name of routing daemon to use if enabled.
|
|
router_flags="-q" # Flags for routing daemon.
|
|
mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
|
|
mrouted_flags="" # Flags for multicast routing daemon.
|
|
ipxgateway_enable="NO" # Set to YES to enable IPX routing.
|
|
ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
|
|
ipxrouted_flags="" # Flags for IPX routing daemon.
|
|
arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL.
|
|
forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
|
|
accept_sourceroute="NO" # accept source routed packets to us
|
|
|
|
### ATM interface options: ###
|
|
atm_enable="NO" # Configure ATM interfaces (or NO).
|
|
#atm_netif_hea0="atm 1" # Network interfaces for physical interface.
|
|
#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
|
|
#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
|
|
#atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
|
|
#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
|
|
#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
|
|
atm_pvcs="" # Set to PVC list (or leave empty).
|
|
atm_arps="" # Set to permanent ARP list (or leave empty).
|
|
|
|
### ISDN interface options: ###
|
|
isdn_enable="NO" # Enable the ISDN subsystem (or NO).
|
|
isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode).
|
|
isdn_flags="-dn -d0x1f9" # Flags for isdnd
|
|
isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
|
|
isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
|
|
|
|
### Miscellaneous network options: ###
|
|
icmp_bmcastecho="NO" # respond to broadcast ping packets
|
|
|
|
|
|
##############################################################
|
|
### System console options #################################
|
|
##############################################################
|
|
|
|
keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
|
|
keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
|
|
keybell="NO" # bell to duration.pitch or normal or visual (or NO).
|
|
keychange="NO" # function keys default values (or NO).
|
|
cursor="NO" # cursor type {normal|blink|destructive} (or NO).
|
|
scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
|
|
font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
|
|
font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
|
|
font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
|
|
blanktime="300" # blank time (in seconds) or "NO" to turn it off.
|
|
saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
|
|
moused_enable="NO" # Run the mouse daemon.
|
|
moused_type="auto" # See man page for rc.conf(5) for available settings.
|
|
moused_port="/dev/cuaa0" # Set to your mouse port.
|
|
moused_flags="" # Any additional flags to moused.
|
|
allscreens_flags="" # Set this vidcontrol mode for all virtual screens
|
|
|
|
|
|
##############################################################
|
|
### Miscellaneous administrative options ###################
|
|
##############################################################
|
|
|
|
cron_enable="YES" # Run the periodic job daemon.
|
|
lpd_enable="NO" # Run the line printer daemon.
|
|
lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
|
|
lpd_flags="" # Flags to lpd (if enabled).
|
|
usbd_enable="NO" # Run the usbd daemon.
|
|
usbd_flags="" # Flags to usbd (if enabled).
|
|
sendmail_enable="YES" # Run the sendmail daemon (or NO).
|
|
sendmail_flags="-bd -q30m" # Flags to sendmail (if enabled)
|
|
dumpdev="NO" # Device name to crashdump to (if enabled).
|
|
enable_quotas="NO" # turn on quotas on startup (or NO).
|
|
check_quotas="NO" # Check quotas on startup (or NO).
|
|
accounting_enable="NO" # Turn on process accounting (or NO).
|
|
ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
|
|
linux_enable="NO" # Linux emulation loaded at startup (or NO).
|
|
svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
|
|
rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
|
|
clear_tmp_enable="NO" # Clear /tmp at startup.
|
|
ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
|
|
# shared library search paths
|
|
ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
|
|
# a.out shared library search paths
|
|
kern_securelevel_enable="NO" # kernel security level (see init(8)),
|
|
kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
|
|
update_motd="YES" # update version info in /etc/motd (or NO)
|
|
vinum_drives="" # put in names of disks containing vinum drives
|
|
|
|
##############################################################
|
|
### Allow local configuration override at the very end here ##
|
|
##############################################################
|
|
#
|
|
#
|
|
|
|
for i in ${rc_conf_files}; do
|
|
if [ -f $i ]; then
|
|
. $i
|
|
fi
|
|
done
|
|
|