freebsd-dev/sys/dev/usb/usb_controller.h
Andrew Thompson 4a35cda731 MFp4 //depot/projects/usb@157853
Clean up old way of polling the USB hardware.  The existing polling support was
a bit hackish.

Submitted by:	Hans Petter Selasky
2009-02-24 03:39:13 +00:00

199 lines
6.3 KiB
C

/* $FreeBSD$ */
/*-
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _USB2_CONTROLLER_H_
#define _USB2_CONTROLLER_H_
/* defines */
#define USB_BUS_DMA_TAG_MAX 8
/* structure prototypes */
struct usb2_bus;
struct usb2_page;
struct usb2_pipe;
struct usb2_page_cache;
struct usb2_setup_params;
struct usb2_hw_ep_profile;
struct usb2_fs_isoc_schedule;
struct usb2_config_descriptor;
struct usb2_endpoint_descriptor;
/* typedefs */
typedef void (usb2_bus_mem_sub_cb_t)(struct usb2_bus *bus, struct usb2_page_cache *pc, struct usb2_page *pg, uint32_t size, uint32_t align);
typedef void (usb2_bus_mem_cb_t)(struct usb2_bus *bus, usb2_bus_mem_sub_cb_t *scb);
/*
* The following structure is used to define all the USB BUS
* callbacks.
*/
struct usb2_bus_methods {
/* USB Device and Host mode - Mandatory */
void (*pipe_init) (struct usb2_device *udev, struct usb2_endpoint_descriptor *edesc, struct usb2_pipe *pipe);
void (*xfer_setup) (struct usb2_setup_params *parm);
void (*xfer_unsetup) (struct usb2_xfer *xfer);
void (*get_dma_delay) (struct usb2_bus *, uint32_t *pdelay);
void (*device_suspend) (struct usb2_device *udev);
void (*device_resume) (struct usb2_device *udev);
void (*set_hw_power) (struct usb2_bus *bus);
/*
* The following flag is set if one or more control transfers are
* active:
*/
#define USB_HW_POWER_CONTROL 0x01
/*
* The following flag is set if one or more bulk transfers are
* active:
*/
#define USB_HW_POWER_BULK 0x02
/*
* The following flag is set if one or more interrupt transfers are
* active:
*/
#define USB_HW_POWER_INTERRUPT 0x04
/*
* The following flag is set if one or more isochronous transfers
* are active:
*/
#define USB_HW_POWER_ISOC 0x08
/*
* The following flag is set if one or more non-root-HUB devices
* are present on the given USB bus:
*/
#define USB_HW_POWER_NON_ROOT_HUB 0x10
/* USB Device mode only - Mandatory */
void (*get_hw_ep_profile) (struct usb2_device *udev, const struct usb2_hw_ep_profile **ppf, uint8_t ep_addr);
void (*set_stall) (struct usb2_device *udev, struct usb2_xfer *xfer, struct usb2_pipe *pipe);
void (*clear_stall) (struct usb2_device *udev, struct usb2_pipe *pipe);
/* USB Device and Host mode - Optional */
void (*roothub_exec) (struct usb2_bus *);
};
/*
* The following structure is used to define all the USB pipe
* callbacks.
*/
struct usb2_pipe_methods {
/* Mandatory USB Device and Host mode callbacks: */
void (*open) (struct usb2_xfer *xfer);
void (*close) (struct usb2_xfer *xfer);
void (*enter) (struct usb2_xfer *xfer);
void (*start) (struct usb2_xfer *xfer);
/* Optional */
void *info;
/* Flags */
uint8_t enter_is_cancelable:1;
uint8_t start_is_cancelable:1;
};
/*
* The following structure keeps information about what a hardware USB
* endpoint supports.
*/
struct usb2_hw_ep_profile {
uint16_t max_in_frame_size; /* IN-token direction */
uint16_t max_out_frame_size; /* OUT-token direction */
uint8_t is_simplex:1;
uint8_t support_multi_buffer:1;
uint8_t support_bulk:1;
uint8_t support_control:1;
uint8_t support_interrupt:1;
uint8_t support_isochronous:1;
uint8_t support_in:1; /* IN-token is supported */
uint8_t support_out:1; /* OUT-token is supported */
};
/*
* The following structure is used when trying to allocate hardware
* endpoints for an USB configuration in USB device side mode.
*/
struct usb2_hw_ep_scratch_sub {
const struct usb2_hw_ep_profile *pf;
uint16_t max_frame_size;
uint8_t hw_endpoint_out;
uint8_t hw_endpoint_in;
uint8_t needs_ep_type;
uint8_t needs_in:1;
uint8_t needs_out:1;
};
/*
* The following structure is used when trying to allocate hardware
* endpoints for an USB configuration in USB device side mode.
*/
struct usb2_hw_ep_scratch {
struct usb2_hw_ep_scratch_sub ep[USB_EP_MAX];
struct usb2_hw_ep_scratch_sub *ep_max;
struct usb2_config_descriptor *cd;
struct usb2_device *udev;
struct usb2_bus_methods *methods;
uint8_t bmOutAlloc[(USB_EP_MAX + 15) / 16];
uint8_t bmInAlloc[(USB_EP_MAX + 15) / 16];
};
/*
* The following structure is used when generating USB descriptors
* from USB templates.
*/
struct usb2_temp_setup {
void *buf;
uint32_t size;
uint8_t usb2_speed;
uint8_t self_powered;
uint8_t bNumEndpoints;
uint8_t bInterfaceNumber;
uint8_t bAlternateSetting;
uint8_t bConfigurationValue;
usb2_error_t err;
};
/* prototypes */
void usb2_bus_mem_flush_all(struct usb2_bus *bus, usb2_bus_mem_cb_t *cb);
uint8_t usb2_bus_mem_alloc_all(struct usb2_bus *bus, bus_dma_tag_t dmat, usb2_bus_mem_cb_t *cb);
void usb2_bus_mem_free_all(struct usb2_bus *bus, usb2_bus_mem_cb_t *cb);
void usb2_bus_roothub_exec(struct usb2_bus *bus);
uint16_t usb2_isoc_time_expand(struct usb2_bus *bus, uint16_t isoc_time_curr);
uint16_t usb2_fs_isoc_schedule_isoc_time_expand(struct usb2_device *udev, struct usb2_fs_isoc_schedule **pp_start, struct usb2_fs_isoc_schedule **pp_end, uint16_t isoc_time);
uint8_t usb2_fs_isoc_schedule_alloc(struct usb2_fs_isoc_schedule *fss, uint8_t *pstart, uint16_t len);
#endif /* _USB2_CONTROLLER_H_ */