freebsd-dev/contrib/ncurses/tack/tack.c
Peter Wemm 0e3d540892 Import unmodified (but trimmed) ncurses 5.0 prerelease 990821.
This contains the full eti (panel, form, menu) extensions.
bmake glue to follow.

Obtained from:	ftp://ftp.clark.net/pub/dickey/ncurses
1999-08-24 01:06:48 +00:00

621 lines
15 KiB
C

/*
** Copyright (C) 1991, 1997 Free Software Foundation, Inc.
**
** This file is part of TACK.
**
** TACK is free software; you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation; either version 2, or (at your option)
** any later version.
**
** TACK is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with TACK; see the file COPYING. If not, write to
** the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
** Boston, MA 02111-1307, USA.
*/
#include <tack.h>
MODULE_ID("$Id: tack.c,v 1.1 1998/01/10 01:34:45 tom Exp $")
/*
This program is designed to test terminfo, not curses. Therefore
I have used as little of curses as possible.
Pads associated with the following capabilities are used to set
delay times in the handler: (cr), (ind), (cub1), (ff), (tab).
I use the (nxon) capability to set the tty handler with/without
xon/xoff. If (smxon)/(rmxon) is defined I will change the terminal
too.
(xon) inhibits the sending of delay characters in putp().
If the terminal is defined with no padding then the (xon) boolean
is a don't care. In this case I recommend that it be reset.
*/
/*****************************************************************************
*
* Option processing
*
*****************************************************************************/
/* options and modes */
int debug_level; /* debugging level */
int translate_mode; /* translate tab, bs, cr, lf, ff */
int scan_mode; /* use scan codes */
int char_mask; /* either 0xFF else 0x7F, eight bit data mask */
int select_delay_type; /* set handler delays for <cr><lf> */
int select_xon_xoff; /* TTY driver XON/XOFF mode select */
int hex_out; /* Display output in hex */
int send_reset_init; /* Send the reset and initialization strings */
FILE *log_fp; /* Terminal logfile */
/*****************************************************************************
*
* Menu definitions
*
*****************************************************************************/
extern struct test_menu sync_menu;
static void tools_hex_echo(struct test_list *, int *, int *);
static void tools_debug(struct test_list *, int *, int *);
static char hex_echo_menu_entry[80];
struct test_list tools_test_list[] = {
{0, 0, 0, 0, "s) ANSI status reports", tools_status, 0},
{0, 0, 0, 0, "g) ANSI SGR modes (bold, underline, reverse)", tools_sgr, 0},
{0, 0, 0, 0, "c) ANSI character sets", tools_charset, 0},
{0, 0, 0, 0, hex_echo_menu_entry, tools_hex_echo, 0},
{0, 0, 0, 0, "e) echo tool", tools_report, 0},
{1, 0, 0, 0, "r) reply tool", tools_report, 0},
{0, 0, 0, 0, "p) performance testing", 0, &sync_menu},
{0, 0, 0, 0, "i) send reset and init", menu_reset_init, 0},
{0, 0, "u8) (u9", 0, "u) test ENQ/ACK handshake", sync_handshake, 0},
{0, 0, 0, 0, "d) change debug level", tools_debug, 0},
{MENU_LAST, 0, 0, 0, 0, 0, 0}
};
struct test_menu tools_menu = {
0, 'q', 0, "Tools Menu", "tools",
0, 0, tools_test_list, 0, 0, 0
};
static void tty_width(struct test_list *, int *, int *);
static void tty_delay(struct test_list *, int *, int *);
static void tty_xon(struct test_list *, int *, int *);
static void tty_trans(struct test_list *, int *, int *);
static void tty_show_state(struct test_menu *);
static char tty_width_menu[80];
static char tty_delay_menu[80];
static char tty_xon_menu[80];
static char tty_trans_menu[80];
static char enable_xon_xoff[] = {"x) enable xon/xoff"};
static char disable_xon_xoff[] = {"x) disable xon/xoff"};
static struct test_list tty_test_list[] = {
{0, 0, 0, 0, tty_width_menu, tty_width, 0},
{0, 0, 0, 0, tty_delay_menu, tty_delay, 0},
{0, 0, 0, 0, tty_xon_menu, tty_xon, 0},
{0, 0, 0, 0, tty_trans_menu, tty_trans, 0},
{MENU_LAST, 0, 0, 0, 0, 0, 0}
};
static struct test_menu tty_menu = {
0, 'q', 0, "Terminal and driver configuration",
"tty", 0,
tty_show_state, tty_test_list, 0, 0, 0
};
extern struct test_list edit_test_list[];
struct test_menu edit_menu = {
0, 'q', 0, "Edit terminfo menu",
"edit", 0,
0, edit_test_list, 0, 0, 0
};
extern struct test_list mode_test_list[];
struct test_menu mode_menu = {
0, 'n', 0, "Mode test menu",
"mode", "n) run standard tests",
0, mode_test_list, 0, 0, 0
};
extern struct test_list acs_test_list[];
static struct test_menu acs_menu = {
0, 'n', 0,
"Alternate character set and graphics rendition test menu",
"acs", "n) run standard tests",
0, acs_test_list, 0, 0, 0
};
extern struct test_list color_test_list[];
struct test_menu color_menu = {
0, 'n', 0,
"Color test menu",
"color", "n) run standard tests",
0, color_test_list, 0, 0, 0
};
extern struct test_list crum_test_list[];
static struct test_menu crum_menu = {
0, 'n', 0,
"Cursor movement test menu",
"move", "n) run standard tests",
0, crum_test_list, 0, 0, 0
};
extern struct test_list funkey_test_list[];
static struct test_menu funkey_menu = {
0, 'n', 0,
"Function key test menu",
"fkey", "n) run standard tests",
sync_test, funkey_test_list, 0, 0, 0
};
extern struct test_list printer_test_list[];
static struct test_menu printer_menu = {
0, 'n', 0,
"Printer test menu",
"printer", "n) run standard tests",
0, printer_test_list, 0, 0, 0
};
static void pad_gen(struct test_list *, int *, int *);
extern struct test_list pad_test_list[];
static struct test_menu pad_menu = {
0, 'n', 0,
"Pad test menu",
"pad", "n) run standard tests",
sync_test, pad_test_list, 0, 0, 0
};
static struct test_list normal_test_list[] = {
{0, 0, 0, 0, "e) edit terminfo", 0, &edit_menu},
{0, 0, 0, 0, "i) send reset and init", menu_reset_init, 0},
{MENU_NEXT, 0, 0, 0, "x) test modes and glitches", 0, &mode_menu},
{MENU_NEXT, 0, 0, 0, "a) test alternate character sets", 0, &acs_menu},
{MENU_NEXT, 0, 0, 0, "c) test color", 0, &color_menu},
{MENU_NEXT, 0, 0, 0, "m) test cursor movement", 0, &crum_menu},
{MENU_NEXT, 0, 0, 0, "f) test function keys", 0, &funkey_menu},
{MENU_NEXT, 0, 0, 0, "p) test string capabilities", 0, &pad_menu},
{0, 0, 0, 0, "P) test printer", 0, &printer_menu},
{MENU_MENU, 0, 0, 0, "/) test a specific capability", 0, 0},
{0, 0, 0, 0, "t) auto generate pad delays", pad_gen, &pad_menu},
{0, 0, "u8) (u9", 0, 0, sync_handshake, 0},
{MENU_LAST, 0, 0, 0, 0, 0, 0}
};
struct test_menu normal_menu = {
0, 'n', 0, "Main test menu",
"test", "n) run standard tests",
0, normal_test_list, 0, 0, 0
};
static void start_tools(struct test_list *, int *, int *);
static void start_modes(struct test_list *, int *, int *);
static void start_basic(struct test_list *, int *, int *);
static void start_log(struct test_list *, int *, int *);
static char logging_menu_entry[80] = "l) start logging";
struct test_list start_test_list[] = {
{0, 0, 0, 0, "b) display basic information", start_basic, 0},
{0, 0, 0, 0, "m) change modes", start_modes, 0},
{0, 0, 0, 0, "t) tools", start_tools, 0},
{MENU_COMPLETE, 0, 0, 0, "n) begin testing", 0, &normal_menu},
{0, 0, 0, 0, logging_menu_entry, start_log, 0},
{MENU_LAST, 0, 0, 0, 0, 0, 0}
};
struct test_menu start_menu = {
0, 'n', 0, "Main Menu", "tack", 0,
0, start_test_list, 0, 0, 0
};
static struct test_list write_terminfo_list[] = {
{0, 0, 0, 0, "w) write the current terminfo to a file", save_info, 0},
{MENU_LAST, 0, 0, 0, 0, 0, 0}
};
/*****************************************************************************
*
* Menu command interpretation.
*
*****************************************************************************/
/*
** tools_hex_echo(testlist, state, ch)
**
** Flip the hex echo flag.
*/
static void
tools_hex_echo(
struct test_list *t GCC_UNUSED,
int *state GCC_UNUSED,
int *ch GCC_UNUSED)
{
if (hex_out) {
hex_out = FALSE;
strcpy(hex_echo_menu_entry,
"h) enable hex output on echo tool");
} else {
hex_out = TRUE;
strcpy(hex_echo_menu_entry,
"h) disable hex output on echo tool");
}
}
/*
** tools_debug(testlist, state, ch)
**
** Change the debug level.
*/
static void
tools_debug(
struct test_list *t GCC_UNUSED,
int *state GCC_UNUSED,
int *ch)
{
char buf[32];
ptext("Enter a new value: ");
read_string(buf, sizeof(buf));
if (buf[0]) {
sscanf(buf, "%d", &debug_level);
}
sprintf(temp, "Debug level is now %d", debug_level);
ptext(temp);
*ch = REQUEST_PROMPT;
}
/*
** start_tools(testlist, state, ch)
**
** Run the generic test tools
*/
static void
start_tools(
struct test_list *t GCC_UNUSED,
int *state GCC_UNUSED,
int *ch GCC_UNUSED)
{
if (hex_out) {
strcpy(hex_echo_menu_entry,
"h) disable hex output on echo tool");
} else {
strcpy(hex_echo_menu_entry,
"h) enable hex output on echo tool");
}
menu_display(&tools_menu, 0);
}
/*
** tty_show_state()
**
** Display the current state on the tty driver settings
*/
static void
tty_show_state(
struct test_menu *menu GCC_UNUSED)
{
put_crlf();
(void) sprintf(temp,
"Accepting %d bits, UNIX delays %d, XON/XOFF %sabled, speed %ld, translate %s, scan-code mode %s.",
(char_mask == ALLOW_PARITY) ? 8 : 7,
select_delay_type,
select_xon_xoff ? "en" : "dis",
tty_baud_rate,
translate_mode ? "on" : "off",
scan_mode ? "on" : "off");
ptextln(temp);
put_crlf();
}
/*
** tty_width(testlist, state, ch)
**
** Change the character width
*/
static void
tty_width(
struct test_list *t GCC_UNUSED,
int *state GCC_UNUSED,
int *ch GCC_UNUSED)
{
if (char_mask == STRIP_PARITY) {
char_mask = ALLOW_PARITY;
strcpy(tty_width_menu, "7) treat terminal as 7-bit");
} else {
char_mask = STRIP_PARITY;
strcpy(tty_width_menu, "8) treat terminal as 8-bit");
}
}
/*
** tty_delay(testlist, state, ch)
**
** Change the delay for <cr><lf> in the TTY driver
*/
static void
tty_delay(
struct test_list *t GCC_UNUSED,
int *state GCC_UNUSED,
int *ch GCC_UNUSED)
{
if (select_delay_type) {
select_delay_type = FALSE;
strcpy(tty_delay_menu,
"d) enable UNIX tty driver delays for <cr><lf>");
} else {
select_delay_type = TRUE;
strcpy(tty_delay_menu,
"d) disable UNIX tty driver delays for <cr><lf>");
}
}
/*
** tty_xon(testlist, state, ch)
**
** Change the XON/XOFF flags in the TTY driver
*/
static void
tty_xon(
struct test_list *t GCC_UNUSED,
int *state GCC_UNUSED,
int *ch GCC_UNUSED)
{
if (select_xon_xoff) {
if (needs_xon_xoff) {
ptextln("This terminal is marked as needing XON/XOFF protocol with (nxon)");
}
if (exit_xon_mode) {
tc_putp(exit_xon_mode);
}
xon_xoff = select_xon_xoff = FALSE;
strcpy(tty_xon_menu, enable_xon_xoff);
} else {
if (enter_xon_mode) {
tc_putp(enter_xon_mode);
}
xon_xoff = select_xon_xoff = TRUE;
strcpy(tty_xon_menu, disable_xon_xoff);
}
tty_set();
}
/*
** tty_trans(testlist, state, ch)
**
** Change the translation mode for special characters
*/
static void
tty_trans(
struct test_list *t GCC_UNUSED,
int *state GCC_UNUSED,
int *ch GCC_UNUSED)
{
if (translate_mode) {
translate_mode = FALSE;
strcpy(tty_trans_menu,
"t) use terminfo values for \\b\\f\\n\\r\\t");
} else {
translate_mode = TRUE;
strcpy(tty_trans_menu,
"t) override terminfo values for \\b\\f\\n\\r\\t");
}
}
/*
** pad_gen(testlist, state, ch)
**
** Menu function for automatic pad generation
*/
static void
pad_gen(
struct test_list *t,
int *state GCC_UNUSED,
int *ch)
{
control_init();
if (tty_can_sync == SYNC_NOT_TESTED) {
verify_time();
}
auto_pad_mode = TRUE;
menu_display(t->sub_menu, ch);
auto_pad_mode = FALSE;
}
/*
** start_modes(testlist, state, ch)
**
** Change the TTY modes
*/
static void
start_modes(
struct test_list *t GCC_UNUSED,
int *state GCC_UNUSED,
int *ch GCC_UNUSED)
{
if (select_delay_type) {
strcpy(tty_delay_menu,
"d) disable UNIX tty driver delays for <cr><lf>");
} else {
strcpy(tty_delay_menu,
"d) enable UNIX tty driver delays for <cr><lf>");
}
if (char_mask == ALLOW_PARITY) {
strcpy(tty_width_menu,
"7) treat terminal as 7-bit");
} else {
strcpy(tty_width_menu,
"8) treat terminal as 8-bit");
}
if (select_xon_xoff) {
strcpy(tty_xon_menu, disable_xon_xoff);
} else {
strcpy(tty_xon_menu, enable_xon_xoff);
}
if (translate_mode) {
strcpy(tty_trans_menu,
"t) override terminfo values for \\b\\f\\n\\r\\t");
} else {
strcpy(tty_trans_menu,
"t) use terminfo values for \\b\\f\\n\\r\\t");
}
menu_display(&tty_menu, 0);
tty_set();
}
/*
** start_basic(testlist, state, ch)
**
** Display basic terminal information
*/
static void
start_basic(
struct test_list *t GCC_UNUSED,
int *state GCC_UNUSED,
int *ch)
{
display_basic();
*ch = REQUEST_PROMPT;
}
/*
** start_log(testlist, state, ch)
**
** Start/stop in logging function
*/
static void
start_log(
struct test_list *t GCC_UNUSED,
int *state GCC_UNUSED,
int *ch GCC_UNUSED)
{
if (logging_menu_entry[5] == 'a') {
ptextln("The log file will capture all characters sent to the terminal.");
if ((log_fp = fopen("tack.log", "w"))) {
ptextln("Start logging to file: tack.log");
strcpy(logging_menu_entry, "l) stop logging");
} else {
ptextln("File open error: tack.log");
}
} else {
if (log_fp) {
fclose(log_fp);
log_fp = 0;
}
ptextln("Terminal output logging stopped.");
strcpy(logging_menu_entry, "l) start logging");
}
}
/*
** show_usage()
**
** Tell the user how its done.
*/
void
show_usage(
char *name)
{
(void) fprintf(stderr, "usage: %s [-itV] [term]\n", name);
}
/*
** print_version()
**
** Print version and other useful information.
*/
void
print_version(void)
{
printf("tack version %d.%02d\n", MAJOR_VERSION, MINOR_VERSION);
printf("Copyright (C) 1997 Free Software Foundation, Inc.\n");
printf("Tack comes with NO WARRANTY, to the extent permitted by law.\n");
printf("You may redistribute copies of Tack under the terms of the\n");
printf("GNU General Public License. For more information about\n");
printf("these matters, see the file named COPYING.\n");
}
/*****************************************************************************
*
* Main sequence
*
*****************************************************************************/
int
main(int argc, char *argv[])
{
int i, j;
char *term_variable;
/* scan the option flags */
send_reset_init = TRUE;
translate_mode = FALSE;
term_variable = getenv("TERM");
tty_can_sync = SYNC_NOT_TESTED;
for (i = 1; i < argc; i++) {
if (argv[i][0] == '-') {
for (j = 1; argv[i][j]; j++) {
switch (argv[i][j]) {
case 'V':
print_version();
return (1);
case 'i':
send_reset_init = FALSE;
break;
case 't':
translate_mode = FALSE;
break;
default:
show_usage(argv[0]);
return (0);
}
}
} else {
term_variable = argv[i];
}
}
(void) strcpy(tty_basename, term_variable);
curses_setup(argv[0]);
menu_can_scan(&normal_menu); /* extract which caps can be tested */
menu_display(&start_menu, 0);
if (user_modified()) {
sprintf(temp, "Hit y to save changes to file: %s ? ",
tty_basename);
ptext(temp);
if (wait_here() == 'y') {
save_info(write_terminfo_list, &i, &j);
}
}
put_str("\nTerminal test complete\n");
bye_kids(0);
return (0);
}