50 lines
1.2 KiB
Plaintext
50 lines
1.2 KiB
Plaintext
# $FreeBSD$
|
|
|
|
# arge0 mdio bus
|
|
hint.argemdio.0.at="nexus0"
|
|
hint.argemdio.0.maddr=0x19000000
|
|
hint.argemdio.0.msize=0x1000
|
|
hint.argemdio.0.order=0
|
|
|
|
# arge0: dedicated switch port
|
|
hint.arge.0.phymask=0x10 # PHY4
|
|
hint.arge.0.miimode=3 # RGMII
|
|
hint.arge.0.mdio=mdioproxy1 # .. off of the switch mdiobus
|
|
|
|
# arge1: nail to 1000/full, RGMII - connected to the switch
|
|
hint.arge.1.media=1000 # Map to 1000/full
|
|
hint.arge.1.fduplex=1 #
|
|
hint.arge.1.phymask=0x0 # no directly mapped PHYs
|
|
hint.arge.1.miimode=3 # RGMII
|
|
|
|
hint.arswitch.0.at="mdio0"
|
|
hint.arswitch.0.is_7240=0
|
|
hint.arswitch.0.numphys=4
|
|
hint.arswitch.0.phy4cpu=1
|
|
hint.arswitch.0.is_rgmii=1
|
|
hint.arswitch.0.is_gmii=0
|
|
|
|
# Don't flip on anything that isn't already enabled.
|
|
# This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're
|
|
# not used here.
|
|
hint.gpio.0.function_set=0x00000000
|
|
hint.gpio.0.function_clear=0x00000000
|
|
|
|
# These are the GPIO LEDs and buttons which can be software controlled.
|
|
hint.gpio.0.pinmask=0x000000ff
|
|
|
|
# GPIO 0: Pin 1
|
|
# GPIO 1: Pin 2
|
|
# GPIO 2: RF LED
|
|
# GPIO 3: Pin 3
|
|
# GPIO 4: Pin 4
|
|
# GPIO 5: Pin 5
|
|
# GPIO 6: Pin 6
|
|
# GPIO 7: Pin 7
|
|
|
|
# RF led
|
|
hint.gpioled.0.at="gpiobus0"
|
|
hint.gpioled.0.name="rf"
|
|
# pin 2
|
|
hint.gpioled.0.pins=0x0004
|