freebsd-dev/sys/powerpc/powermac/ata_dbdma.c
Marius Strobl b56b04b800 Several chipset drivers alter parameters relevant for the DMA tag creation,
i.e. alignment, max_address, max_iosize and segsize (only max_address is
thought to have an negative impact regarding this issue though), after
calling ata_dmainit() either directly or indirectly so these values have
no effect or at least no effect on the DMA tags and the defaults are used
for the latter instead. So change the drivers to set these parameters
up-front and ata_dmainit() to honor them.

This file was missed in r216013.

Submitted by:	nwhitehorn
2010-11-30 20:54:14 +00:00

287 lines
7.5 KiB
C

/*-
* Copyright 2008 by Nathan Whitehorn. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Common routines for the DMA engine on both the Apple Kauai and MacIO
* ATA controllers.
*/
#include "opt_ata.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/malloc.h>
#include <sys/sema.h>
#include <sys/taskqueue.h>
#include <vm/uma.h>
#include <machine/stdarg.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <sys/ata.h>
#include <dev/ata/ata-all.h>
#include <dev/ata/ata-pci.h>
#include <ata_if.h>
#include "ata_dbdma.h"
struct ata_dbdma_dmaload_args {
struct ata_dbdma_channel *sc;
int write;
int nsegs;
};
static void
ata_dbdma_setprd(void *xarg, bus_dma_segment_t *segs, int nsegs, int error)
{
struct ata_dbdma_dmaload_args *arg = xarg;
struct ata_dbdma_channel *sc = arg->sc;
int branch_type, command;
int prev_stop;
int i;
mtx_lock(&sc->dbdma_mtx);
prev_stop = sc->next_dma_slot-1;
if (prev_stop < 0)
prev_stop = 0xff;
for (i = 0; i < nsegs; i++) {
/* Loop back to the beginning if this is our last slot */
if (sc->next_dma_slot == 0xff)
branch_type = DBDMA_ALWAYS;
else
branch_type = DBDMA_NEVER;
if (arg->write) {
command = (i + 1 < nsegs) ? DBDMA_OUTPUT_MORE :
DBDMA_OUTPUT_LAST;
} else {
command = (i + 1 < nsegs) ? DBDMA_INPUT_MORE :
DBDMA_INPUT_LAST;
}
dbdma_insert_command(sc->dbdma, sc->next_dma_slot++,
command, 0, segs[i].ds_addr, segs[i].ds_len,
DBDMA_NEVER, branch_type, DBDMA_NEVER, 0);
if (branch_type == DBDMA_ALWAYS)
sc->next_dma_slot = 0;
}
/* We have a corner case where the STOP command is the last slot,
* but you can't branch in STOP commands. So add a NOP branch here
* and the STOP in slot 0. */
if (sc->next_dma_slot == 0xff) {
dbdma_insert_branch(sc->dbdma, sc->next_dma_slot, 0);
sc->next_dma_slot = 0;
}
#if 0
dbdma_insert_command(sc->dbdma, sc->next_dma_slot++,
DBDMA_NOP, 0, 0, 0, DBDMA_ALWAYS, DBDMA_NEVER, DBDMA_NEVER, 0);
#endif
dbdma_insert_stop(sc->dbdma, sc->next_dma_slot++);
dbdma_insert_nop(sc->dbdma, prev_stop);
dbdma_sync_commands(sc->dbdma, BUS_DMASYNC_PREWRITE);
mtx_unlock(&sc->dbdma_mtx);
arg->nsegs = nsegs;
}
static int
ata_dbdma_status(device_t dev)
{
struct ata_dbdma_channel *sc = device_get_softc(dev);
struct ata_channel *ch = device_get_softc(dev);
if (sc->sc_ch.dma.flags & ATA_DMA_ACTIVE) {
return (!(dbdma_get_chan_status(sc->dbdma) &
DBDMA_STATUS_ACTIVE));
}
if (ATA_IDX_INB(ch, ATA_ALTSTAT) & ATA_S_BUSY) {
DELAY(100);
if (ATA_IDX_INB(ch, ATA_ALTSTAT) & ATA_S_BUSY)
return 0;
}
return 1;
}
static int
ata_dbdma_start(struct ata_request *request)
{
struct ata_dbdma_channel *sc = device_get_softc(request->parent);
sc->sc_ch.dma.flags |= ATA_DMA_ACTIVE;
dbdma_wake(sc->dbdma);
return 0;
}
static void
ata_dbdma_reset(device_t dev)
{
struct ata_dbdma_channel *sc = device_get_softc(dev);
mtx_lock(&sc->dbdma_mtx);
dbdma_stop(sc->dbdma);
dbdma_insert_stop(sc->dbdma, 0);
sc->next_dma_slot=1;
dbdma_set_current_cmd(sc->dbdma, 0);
sc->sc_ch.dma.flags &= ~ATA_DMA_ACTIVE;
mtx_unlock(&sc->dbdma_mtx);
}
static int
ata_dbdma_stop(struct ata_request *request)
{
struct ata_dbdma_channel *sc = device_get_softc(request->parent);
uint16_t status;
status = dbdma_get_chan_status(sc->dbdma);
dbdma_pause(sc->dbdma);
sc->sc_ch.dma.flags &= ~ATA_DMA_ACTIVE;
if (status & DBDMA_STATUS_DEAD) {
device_printf(request->parent,"DBDMA dead, resetting "
"channel...\n");
ata_dbdma_reset(request->parent);
return ATA_S_ERROR;
}
if (!(status & DBDMA_STATUS_RUN)) {
device_printf(request->parent,"DBDMA confused, stop called "
"when channel is not running!\n");
return ATA_S_ERROR;
}
if (status & DBDMA_STATUS_ACTIVE) {
device_printf(request->parent,"DBDMA channel stopped "
"prematurely\n");
return ATA_S_ERROR;
}
return 0;
}
static int
ata_dbdma_load(struct ata_request *request, void *addr, int *entries)
{
struct ata_channel *ch = device_get_softc(request->parent);
struct ata_dbdma_dmaload_args args;
int error;
args.sc = device_get_softc(request->parent);
args.write = !(request->flags & ATA_R_READ);
if (!request->bytecount) {
device_printf(request->dev,
"FAILURE - zero length DMA transfer attempted\n");
return EIO;
}
if (((uintptr_t)(request->data) & (ch->dma.alignment - 1)) ||
(request->bytecount & (ch->dma.alignment - 1))) {
device_printf(request->dev,
"FAILURE - non aligned DMA transfer attempted\n");
return EIO;
}
if (request->bytecount > ch->dma.max_iosize) {
device_printf(request->dev,
"FAILURE - oversized DMA transfer attempt %d > %d\n",
request->bytecount, ch->dma.max_iosize);
return EIO;
}
request->dma = &ch->dma.slot[0];
if ((error = bus_dmamap_load(request->dma->data_tag,
request->dma->data_map, request->data, request->bytecount,
&ata_dbdma_setprd, &args, BUS_DMA_NOWAIT))) {
device_printf(request->dev, "FAILURE - load data\n");
goto error;
}
if (entries)
*entries = args.nsegs;
bus_dmamap_sync(request->dma->sg_tag, request->dma->sg_map,
BUS_DMASYNC_PREWRITE);
bus_dmamap_sync(request->dma->data_tag, request->dma->data_map,
(request->flags & ATA_R_READ) ?
BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
return 0;
error:
ch->dma.unload(request);
return EIO;
}
void
ata_dbdma_dmainit(device_t dev)
{
struct ata_dbdma_channel *sc = device_get_softc(dev);
int error;
error = dbdma_allocate_channel(sc->dbdma_regs, sc->dbdma_offset,
bus_get_dma_tag(dev), 256, &sc->dbdma);
dbdma_set_wait_selector(sc->dbdma,1 << 7, 1 << 7);
dbdma_insert_stop(sc->dbdma,0);
sc->next_dma_slot=1;
sc->sc_ch.dma.start = ata_dbdma_start;
sc->sc_ch.dma.stop = ata_dbdma_stop;
sc->sc_ch.dma.load = ata_dbdma_load;
sc->sc_ch.dma.reset = ata_dbdma_reset;
/*
* DBDMA's field for transfer size is 16 bits. This will overflow
* if we try to do a 64K transfer, so stop short of 64K.
*/
sc->sc_ch.dma.segsize = 126 * DEV_BSIZE;
ata_dmainit(dev);
sc->sc_ch.hw.status = ata_dbdma_status;
mtx_init(&sc->dbdma_mtx, "ATA DBDMA", NULL, MTX_DEF);
}