d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a4acc8c3df
freebsd-dev/contrib/tcsh/FAQ
Mark Peek bc49518e16 Flatten vendor/tcsh/dist.
2009-07-10 21:00:38 +00:00

305 lines
12 KiB
Plaintext
Raw Blame History

[Home] FAQ
Home | RecentChanges | Preferences
_________________________________________________________________
This is for people who do not read the manual!
So far people who don't read manuals don't read this either... I may
call it README.*PLEASE* in the future, but then the same people won't
be able to get ftp it... :-)
_________________________________________________________________
1. Where can I find tcsh sources?
See http://www.tcsh.org/MostRecentRelease for download locations.
_________________________________________________________________
2. Why is the meta key broken in tcsh-5.20 and up?
On some machines the tty is not set up to pass 8 bit characters by
default. Tcsh 5.19 used to try to determine if pass8 should be set by
looking at the terminal's meta key. Unfortunately there is no good way
of determining if the terminal can really pass 8 characters or not.
Consider if you are logged in through a modem line with 7 bits and
parity and your terminal has a meta key. Then tcsh 5.19 would set
wrongly set pass8.
If you did like the previous behavior you can add in /etc/csh.login,
or in .login:
if ( $?tcsh && $?prompt ) then
if ( "`echotc meta`" == "yes" ) then
stty pass8
endif
endif
If you don't have pass8, maybe one of these would work..
stty -parity -evenp -oddp cs8 -istrip (rs6000)
stty -parenb -istrip cs8
Finally, tcsh will bind all printable meta characters to the self
insert command. If you don't want that to happen (i.e. use the
printable meta characters for commands) setenv NOREBIND.
_________________________________________________________________
3. I ran 'dbxtool &' and 'shelltool &' from tcsh, and they end up in
cbreak and no echo mode?
These programs are broken. Background jobs should not try to look at
the tty. What happens is that dbxtool looks in stderr to inherit the
tty setups, but tcsh sets up the tty in cbreak and -echo modes, so
that it can do line editing. This cannot be fixed because tcsh cannot
give away the tty. Pick one of the following as a workaround:
dbxtool < /dev/null >& /dev/null &
/usr/etc/setsid dbxtool &
If that does not work, for dbxtool at least you can add "sh stty sane"
in your .dbxinit
_________________________________________________________________
4. I tried to compile tcsh and it cannot find <locale.h>?
Your system does not support NLS. Undefine NLS in config_f.h and it
should work fine.
_________________________________________________________________
5. Where can I get csh sources?
Csh sources are now available with the 4.4BSD networking
distributions. You don't need csh sources to compile tcsh-6.0x.
_________________________________________________________________
6. I just made tcsh my login shell, and I cannot ftp any more?
Newer versions of the ftp daemon check for the validity of the user's
shell before they allow logins. The list of valid login shells is
either hardcoded or it is usually in a file called /etc/shells. If it
is hard-coded, then you are out of luck and your best bet is to get a
newer version of ftpd. Otherwise add tcsh to the list of shells. [For
AIX this file is called /etc/security/login.cfg.] Remember that the
full path is required. If there is no /etc/shells, and you are
creating one, remember to add /bin/csh, /bin/sh, and any other valid
shells for your system, so that other people can ftp too :-)
_________________________________________________________________
7. I am using SunView or OpenWindows and editing is screwed up. In
particular my arrow keys and backspace don't work right. What am I
doing wrong?
Well, cmdtool tries to do its own command line editing and the effect
you get is one of using an editor inside an editor. Both try to
interpret the arrow key sequences and cmdtool wins since it gets them
first. The solutions are in my order of preference:
1. Don't use suntools
2. Use shelltool instead of cmdtool.
3. Unset edit in tcsh.
_________________________________________________________________
8. On a SPARCstation running Solaris 2.x and OpenWindows 3.1, inside a
cmdtool, the short-cut key sequence to clear log (i.e. Meta-e or
Diamond-e) doesn't work: it just echos 'e'; or
Unset edit in tcsh.
_________________________________________________________________
9. On a SPARCstation running Solaris 2.x and OpenWindows 3.1, maketool
(within SPARCworks) doesn't work: it just does a `cd' to the working
directory then stops.
Unset edit in tcsh. Using shelltool instead of cmdtool does not fix
this.
_________________________________________________________________
10. I rlogin to another machine, and then no matter what I tell 'stty'
I cannot get it to pass 8 bit characters?
Maybe you need to use 'rlogin -8' to tell rlogin to pass 8 bit
characters.
_________________________________________________________________
11. Where do I get the public domain directory library?
Anonymous ftp to prep.ai.mit.edu:/pub/gnu/dirent.tar.Z
_________________________________________________________________
12. I compiled tcsh using gcc, and when I start up it says: tcsh:
Warning no access to tty (Invalid Argument). Thus no job control in
this shell
Your <sys/ioctl.h> file is not ansi compliant. You have one of 3
choices:
1. Run fixincludes from the gcc distribution.
2. Add -traditional to the gcc flags.
3. Compile with cc.
_________________________________________________________________
13. I compiled tcsh with the SunOS unbundled compiler and now things
get echo'ed twice.
It is a bug in the unbundled optimizer. Lower the optimization level.
_________________________________________________________________
14. How can I use the arrow keys with hpterm?
Hp terminals use the arrow keys internally. You can tell hpterm not to
do that, by sending it the termcap sequence smkx. Since this has to be
done all the time, the easiest thing is to put it as an alias for
precmd, or inside the prompt:
if ($term == "hp") then
set prompt="%{`echotc smkx`%}$prompt"
endif
Note that by doing that you cannot use pgup and pgdn to scroll... Also
if you are using termcap, replace "smkx" with "ks"...
_________________________________________________________________
15. On POSIX machines ^C and ^Z will do not work when tcsh is a login
shell?
Make sure that the interrupt character is set to ^C and suspend is set
to ^Z; 'stty -a' will show you the current stty settings; 'stty intr
^C susp ^Z' will set them to ^C and ^Z respectively.
_________________________________________________________________
16. I am trying to compile tcsh and I am getting compile errors that
look like:
>sh.c:???: `STR???' undeclared, outside of functions [gcc]
>"sh.c", line ???: STR??? undefined [cc]
You interrupted make, while it was making the automatically generated
headers. Type 'make clean; make'
_________________________________________________________________
17. On the cray, sometimes the CR/LF mapping gets screwed up.
You are probably logged in to the cray via telnet. Cray's telnetd
implements line mode selection the telnet client you are using does
not implement telnet line mode. This cause the Cray's telnetd to try
to use KLUDGELINEMODE. You can turn off telnet line mode from the cray
side by doing a "stty -extproc", or you can get the Cray AIC to build
a telnetd without KLUDGELINEMODE, or you can compile a new telnet
client (from the BSD net2 tape), or at least on the suns use: 'mode
character'.
_________________________________________________________________
18. On AU/X, I made tcsh my startup shell, but the mac desktop is not
starting up (no X11 or Finder), and I only get console emulation.
This is another manifestation of item 5. Just add the pathname to tcsh
in /etc/shells and everything should work fine.
_________________________________________________________________
19. On machines that use YP (NIS) tilde expansion might end up in
/dev/null
If this happens complain to your vendor, to get a new version of NIS.
You can fix that in tcsh by defining YPBUGS in config.h
_________________________________________________________________
20. Script on SGI 4.0.5 does not give us a tty, so we cannot have job
control.
Their csh does not have job control either. Try:
% script
% cat > /dev/tty
_________________________________________________________________
21. I start tcsh and it takes a couple of minutes to get the prompt.
You have defined REMOTEHOST and your DNS is not responding. Either
undefine REMOTEHOST and recompile or fix your DNS.
_________________________________________________________________
22. If you need help generating your .cshrc file, check out:
http://www.imada.sdu.dk/~blackie/dotfile/
or
http://www.dotfiles.com
_________________________________________________________________
23. On POSIX systems the kernel will send hup signals to all the
processes in the foreground process group if 'stty hupcl' is set.
For example
./tcsh
echo $$
591
./tcsh
kill -6 591
Will kill everything, since hup will be sent to all tcsh processes. To
avoid that you can set stty -hupcl, but it is not recommended.
_________________________________________________________________
24. When I rsh the meta key stops working on the remote machine.
Try using rsh -8; this option is undocumented on some systems, but it
works. If that does not work, get and use ssh/sshd. You'll be better
off from a security point of view anyway.
_________________________________________________________________
25. Tcsh compiled under hp/ux-10.x does not pass resource limits
correctly when ran on hp/ux-11.x systems.
This is a problem with lack of ABI compatibility between the two
systems. The only solution is to recompile.
_________________________________________________________________
26. Refreshing in command line editing can appear broken on some OS's
This is because the termcap/terminfo description lies about the
ability of the terminal to use tabs. At least on Compaq/DEC Alpha
OSF/1 3.x and 4.x systems, stty -tabs will cause problems.
_________________________________________________________________
27. Where can I learn the merits of tcsh vs. bash vs. csh vs. sh etc?
You can read the manual page section titled [NEW FEATURES] listing
features that tcsh adds to csh.
You can read Tom Christiansen's [Csh Programming Considered Harmful],
a document advocating that csh (and by extension, tcsh) should not be
used for writing shell scripts.
XXX: Need to find something about [bash], but bash is sh-compatible
and has many of the same interactive features of tcsh (command
completion does not appear to be as flexible, though).
[Curtains up: introducing the Z shell] has a pretty good rundown on
zsh. Aside from the arguments about csh being evil, tcsh appears to
compare well with zsh [zsh]. Zsh is sh and ksh compatible, with many
of the interactive features of tcsh.
_________________________________________________________________
28. Why does FreeBSD's tcsh do history browsing differently than I
expect?
On FreeBSD, by default, the up arrow is set to
"history-search-backward", rather than the default "up-history". As a
result, if you type (part of) a word and press up arrow, you'll see
previous commands that match the prefix. Pretty useful, actually,
although it takes some getting used to. You can use bindkey to see
your settings, and to rebind up & down differently if desired.
_________________________________________________________________
Everything else is a bug :-(
Christos
_________________________________________________________________
Home | RecentChanges | Preferences
Edit text of this page | View other revisions
Last edited April 29, 2004 15:02 (diff)
Search: ____________________
Reference in New Issue View Git Blame Copy Permalink