d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a688f49162
freebsd-dev/sys/dev/usb/usb_transfer.c
Andrew Thompson 476183df94 Improve device mode (gadget) stall handling. 
Some hardware easily comes out of sync with regard to whether the current or
the next control transfer should be stalled, if a stall command is always
issued before receiving the SETUP packet. After this patch the stall command
will only be issued when a transfer should actually be stalled.

Submitted by:	Hans Petter Selasky
2009-05-21 17:39:21 +00:00

2822 lines
70 KiB
C
Raw Blame History

/* $FreeBSD$ */
/*-
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <dev/usb/usb_mfunc.h>
#include <dev/usb/usb_error.h>
#include <dev/usb/usb.h>
#define USB_DEBUG_VAR usb2_debug
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_transfer.h>
#include <dev/usb/usb_device.h>
#include <dev/usb/usb_debug.h>
#include <dev/usb/usb_util.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
struct usb2_std_packet_size {
struct {
uint16_t min; /* inclusive */
uint16_t max; /* inclusive */
} range;
uint16_t fixed[4];
};
static usb2_callback_t usb2_request_callback;
static const struct usb2_config usb2_control_ep_cfg[USB_DEFAULT_XFER_MAX] = {
/* This transfer is used for generic control endpoint transfers */
[0] = {
.type = UE_CONTROL,
.endpoint = 0x00, /* Control endpoint */
.direction = UE_DIR_ANY,
.bufsize = USB_EP0_BUFSIZE, /* bytes */
.flags = {.proxy_buffer = 1,},
.callback = &usb2_request_callback,
.usb_mode = USB_MODE_DUAL, /* both modes */
},
/* This transfer is used for generic clear stall only */
[1] = {
.type = UE_CONTROL,
.endpoint = 0x00, /* Control pipe */
.direction = UE_DIR_ANY,
.bufsize = sizeof(struct usb2_device_request),
.callback = &usb2_do_clear_stall_callback,
.timeout = 1000, /* 1 second */
.interval = 50, /* 50ms */
.usb_mode = USB_MODE_HOST,
},
};
/* function prototypes */
static void usb2_update_max_frame_size(struct usb2_xfer *);
static void usb2_transfer_unsetup_sub(struct usb2_xfer_root *, uint8_t);
static void usb2_control_transfer_init(struct usb2_xfer *);
static uint8_t usb2_start_hardware_sub(struct usb2_xfer *);
static void usb2_callback_proc(struct usb2_proc_msg *);
static void usb2_callback_ss_done_defer(struct usb2_xfer *);
static void usb2_callback_wrapper(struct usb2_xfer_queue *);
static void usb2_dma_delay_done_cb(void *);
static void usb2_transfer_start_cb(void *);
static uint8_t usb2_callback_wrapper_sub(struct usb2_xfer *);
static void usb2_get_std_packet_size(struct usb2_std_packet_size *ptr,
uint8_t type, enum usb_dev_speed speed);
/*------------------------------------------------------------------------*
* usb2_request_callback
*------------------------------------------------------------------------*/
static void
usb2_request_callback(struct usb2_xfer *xfer)
{
if (xfer->flags_int.usb_mode == USB_MODE_DEVICE)
usb2_handle_request_callback(xfer);
else
usb2_do_request_callback(xfer);
}
/*------------------------------------------------------------------------*
* usb2_update_max_frame_size
*
* This function updates the maximum frame size, hence high speed USB
* can transfer multiple consecutive packets.
*------------------------------------------------------------------------*/
static void
usb2_update_max_frame_size(struct usb2_xfer *xfer)
{
/* compute maximum frame size */
if (xfer->max_packet_count == 2) {
xfer->max_frame_size = 2 * xfer->max_packet_size;
} else if (xfer->max_packet_count == 3) {
xfer->max_frame_size = 3 * xfer->max_packet_size;
} else {
xfer->max_frame_size = xfer->max_packet_size;
}
}
/*------------------------------------------------------------------------*
* usb2_get_dma_delay
*
* The following function is called when we need to
* synchronize with DMA hardware.
*
* Returns:
* 0: no DMA delay required
* Else: milliseconds of DMA delay
*------------------------------------------------------------------------*/
usb2_timeout_t
usb2_get_dma_delay(struct usb2_bus *bus)
{
uint32_t temp = 0;
if (bus->methods->get_dma_delay) {
(bus->methods->get_dma_delay) (bus, &temp);
/*
* Round up and convert to milliseconds. Note that we use
* 1024 milliseconds per second. to save a division.
*/
temp += 0x3FF;
temp /= 0x400;
}
return (temp);
}
/*------------------------------------------------------------------------*
* usb2_transfer_setup_sub_malloc
*
* This function will allocate one or more DMA'able memory chunks
* according to "size", "align" and "count" arguments. "ppc" is
* pointed to a linear array of USB page caches afterwards.
*
* Returns:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
#if USB_HAVE_BUSDMA
uint8_t
usb2_transfer_setup_sub_malloc(struct usb2_setup_params *parm,
struct usb2_page_cache **ppc, usb2_size_t size, usb2_size_t align,
usb2_size_t count)
{
struct usb2_page_cache *pc;
struct usb2_page *pg;
void *buf;
usb2_size_t n_dma_pc;
usb2_size_t n_obj;
usb2_size_t x;
usb2_size_t y;
usb2_size_t r;
usb2_size_t z;
USB_ASSERT(align > 1, ("Invalid alignment, 0x%08x!\n",
align));
USB_ASSERT(size > 0, ("Invalid size = 0!\n"));
if (count == 0) {
return (0); /* nothing to allocate */
}
/*
* Make sure that the size is aligned properly.
*/
size = -((-size) & (-align));
/*
* Try multi-allocation chunks to reduce the number of DMA
* allocations, hence DMA allocations are slow.
*/
if (size >= PAGE_SIZE) {
n_dma_pc = count;
n_obj = 1;
} else {
/* compute number of objects per page */
n_obj = (PAGE_SIZE / size);
/*
* Compute number of DMA chunks, rounded up
* to nearest one:
*/
n_dma_pc = ((count + n_obj - 1) / n_obj);
}
if (parm->buf == NULL) {
/* for the future */
parm->dma_page_ptr += n_dma_pc;
parm->dma_page_cache_ptr += n_dma_pc;
parm->dma_page_ptr += count;
parm->xfer_page_cache_ptr += count;
return (0);
}
for (x = 0; x != n_dma_pc; x++) {
/* need to initialize the page cache */
parm->dma_page_cache_ptr[x].tag_parent =
&parm->curr_xfer->xroot->dma_parent_tag;
}
for (x = 0; x != count; x++) {
/* need to initialize the page cache */
parm->xfer_page_cache_ptr[x].tag_parent =
&parm->curr_xfer->xroot->dma_parent_tag;
}
if (ppc) {
*ppc = parm->xfer_page_cache_ptr;
}
r = count; /* set remainder count */
z = n_obj * size; /* set allocation size */
pc = parm->xfer_page_cache_ptr;
pg = parm->dma_page_ptr;
for (x = 0; x != n_dma_pc; x++) {
if (r < n_obj) {
/* compute last remainder */
z = r * size;
n_obj = r;
}
if (usb2_pc_alloc_mem(parm->dma_page_cache_ptr,
pg, z, align)) {
return (1); /* failure */
}
/* Set beginning of current buffer */
buf = parm->dma_page_cache_ptr->buffer;
/* Make room for one DMA page cache and one page */
parm->dma_page_cache_ptr++;
pg++;
for (y = 0; (y != n_obj); y++, r--, pc++, pg++) {
/* Load sub-chunk into DMA */
if (usb2_pc_dmamap_create(pc, size)) {
return (1); /* failure */
}
pc->buffer = USB_ADD_BYTES(buf, y * size);
pc->page_start = pg;
mtx_lock(pc->tag_parent->mtx);
if (usb2_pc_load_mem(pc, size, 1 /* synchronous */ )) {
mtx_unlock(pc->tag_parent->mtx);
return (1); /* failure */
}
mtx_unlock(pc->tag_parent->mtx);
}
}
parm->xfer_page_cache_ptr = pc;
parm->dma_page_ptr = pg;
return (0);
}
#endif
/*------------------------------------------------------------------------*
* usb2_transfer_setup_sub - transfer setup subroutine
*
* This function must be called from the "xfer_setup" callback of the
* USB Host or Device controller driver when setting up an USB
* transfer. This function will setup correct packet sizes, buffer
* sizes, flags and more, that are stored in the "usb2_xfer"
* structure.
*------------------------------------------------------------------------*/
void
usb2_transfer_setup_sub(struct usb2_setup_params *parm)
{
enum {
REQ_SIZE = 8,
MIN_PKT = 8,
};
struct usb2_xfer *xfer = parm->curr_xfer;
const struct usb2_config *setup = parm->curr_setup;
struct usb2_endpoint_descriptor *edesc;
struct usb2_std_packet_size std_size;
usb2_frcount_t n_frlengths;
usb2_frcount_t n_frbuffers;
usb2_frcount_t x;
uint8_t type;
uint8_t zmps;
/*
* Sanity check. The following parameters must be initialized before
* calling this function.
*/
if ((parm->hc_max_packet_size == 0) ||
(parm->hc_max_packet_count == 0) ||
(parm->hc_max_frame_size == 0)) {
parm->err = USB_ERR_INVAL;
goto done;
}
edesc = xfer->pipe->edesc;
type = (edesc->bmAttributes & UE_XFERTYPE);
xfer->flags = setup->flags;
xfer->nframes = setup->frames;
xfer->timeout = setup->timeout;
xfer->callback = setup->callback;
xfer->interval = setup->interval;
xfer->endpoint = edesc->bEndpointAddress;
xfer->max_packet_size = UGETW(edesc->wMaxPacketSize);
xfer->max_packet_count = 1;
/* make a shadow copy: */
xfer->flags_int.usb_mode = parm->udev->flags.usb_mode;
parm->bufsize = setup->bufsize;
if (parm->speed == USB_SPEED_HIGH) {
xfer->max_packet_count += (xfer->max_packet_size >> 11) & 3;
xfer->max_packet_size &= 0x7FF;
}
/* range check "max_packet_count" */
if (xfer->max_packet_count > parm->hc_max_packet_count) {
xfer->max_packet_count = parm->hc_max_packet_count;
}
/* filter "wMaxPacketSize" according to HC capabilities */
if ((xfer->max_packet_size > parm->hc_max_packet_size) ||
(xfer->max_packet_size == 0)) {
xfer->max_packet_size = parm->hc_max_packet_size;
}
/* filter "wMaxPacketSize" according to standard sizes */
usb2_get_std_packet_size(&std_size, type, parm->speed);
if (std_size.range.min || std_size.range.max) {
if (xfer->max_packet_size < std_size.range.min) {
xfer->max_packet_size = std_size.range.min;
}
if (xfer->max_packet_size > std_size.range.max) {
xfer->max_packet_size = std_size.range.max;
}
} else {
if (xfer->max_packet_size >= std_size.fixed[3]) {
xfer->max_packet_size = std_size.fixed[3];
} else if (xfer->max_packet_size >= std_size.fixed[2]) {
xfer->max_packet_size = std_size.fixed[2];
} else if (xfer->max_packet_size >= std_size.fixed[1]) {
xfer->max_packet_size = std_size.fixed[1];
} else {
/* only one possibility left */
xfer->max_packet_size = std_size.fixed[0];
}
}
/* compute "max_frame_size" */
usb2_update_max_frame_size(xfer);
/* check interrupt interval and transfer pre-delay */
if (type == UE_ISOCHRONOUS) {
uint16_t frame_limit;
xfer->interval = 0; /* not used, must be zero */
xfer->flags_int.isochronous_xfr = 1; /* set flag */
if (xfer->timeout == 0) {
/*
* set a default timeout in
* case something goes wrong!
*/
xfer->timeout = 1000 / 4;
}
switch (parm->speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
frame_limit = USB_MAX_FS_ISOC_FRAMES_PER_XFER;
break;
default:
frame_limit = USB_MAX_HS_ISOC_FRAMES_PER_XFER;
break;
}
if (xfer->nframes > frame_limit) {
/*
* this is not going to work
* cross hardware
*/
parm->err = USB_ERR_INVAL;
goto done;
}
if (xfer->nframes == 0) {
/*
* this is not a valid value
*/
parm->err = USB_ERR_ZERO_NFRAMES;
goto done;
}
} else {
/*
* if a value is specified use that else check the endpoint
* descriptor
*/
if (xfer->interval == 0) {
if (type == UE_INTERRUPT) {
xfer->interval = edesc->bInterval;
switch (parm->speed) {
case USB_SPEED_SUPER:
case USB_SPEED_VARIABLE:
/* 125us -> 1ms */
if (xfer->interval < 4)
xfer->interval = 1;
else if (xfer->interval > 16)
xfer->interval = (1<<(16-4));
else
xfer->interval =
(1 << (xfer->interval-4));
break;
case USB_SPEED_HIGH:
/* 125us -> 1ms */
xfer->interval /= 8;
break;
default:
break;
}
if (xfer->interval == 0) {
/*
* One millisecond is the smallest
* interval we support:
*/
xfer->interval = 1;
}
}
}
}
/*
* NOTE: we do not allow "max_packet_size" or "max_frame_size"
* to be equal to zero when setting up USB transfers, hence
* this leads to alot of extra code in the USB kernel.
*/
if ((xfer->max_frame_size == 0) ||
(xfer->max_packet_size == 0)) {
zmps = 1;
if ((parm->bufsize <= MIN_PKT) &&
(type != UE_CONTROL) &&
(type != UE_BULK)) {
/* workaround */
xfer->max_packet_size = MIN_PKT;
xfer->max_packet_count = 1;
parm->bufsize = 0; /* automatic setup length */
usb2_update_max_frame_size(xfer);
} else {
parm->err = USB_ERR_ZERO_MAXP;
goto done;
}
} else {
zmps = 0;
}
/*
* check if we should setup a default
* length:
*/
if (parm->bufsize == 0) {
parm->bufsize = xfer->max_frame_size;
if (type == UE_ISOCHRONOUS) {
parm->bufsize *= xfer->nframes;
}
}
/*
* check if we are about to setup a proxy
* type of buffer:
*/
if (xfer->flags.proxy_buffer) {
/* round bufsize up */
parm->bufsize += (xfer->max_frame_size - 1);
if (parm->bufsize < xfer->max_frame_size) {
/* length wrapped around */
parm->err = USB_ERR_INVAL;
goto done;
}
/* subtract remainder */
parm->bufsize -= (parm->bufsize % xfer->max_frame_size);
/* add length of USB device request structure, if any */
if (type == UE_CONTROL) {
parm->bufsize += REQ_SIZE; /* SETUP message */
}
}
xfer->max_data_length = parm->bufsize;
/* Setup "n_frlengths" and "n_frbuffers" */
if (type == UE_ISOCHRONOUS) {
n_frlengths = xfer->nframes;
n_frbuffers = 1;
} else {
if (type == UE_CONTROL) {
xfer->flags_int.control_xfr = 1;
if (xfer->nframes == 0) {
if (parm->bufsize <= REQ_SIZE) {
/*
* there will never be any data
* stage
*/
xfer->nframes = 1;
} else {
xfer->nframes = 2;
}
}
} else {
if (xfer->nframes == 0) {
xfer->nframes = 1;
}
}
n_frlengths = xfer->nframes;
n_frbuffers = xfer->nframes;
}
/*
* check if we have room for the
* USB device request structure:
*/
if (type == UE_CONTROL) {
if (xfer->max_data_length < REQ_SIZE) {
/* length wrapped around or too small bufsize */
parm->err = USB_ERR_INVAL;
goto done;
}
xfer->max_data_length -= REQ_SIZE;
}
/* setup "frlengths" */
xfer->frlengths = parm->xfer_length_ptr;
parm->xfer_length_ptr += n_frlengths;
/* setup "frbuffers" */
xfer->frbuffers = parm->xfer_page_cache_ptr;
parm->xfer_page_cache_ptr += n_frbuffers;
/*
* check if we need to setup
* a local buffer:
*/
if (!xfer->flags.ext_buffer) {
/* align data */
parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
if (parm->buf) {
xfer->local_buffer =
USB_ADD_BYTES(parm->buf, parm->size[0]);
usb2_set_frame_offset(xfer, 0, 0);
if ((type == UE_CONTROL) && (n_frbuffers > 1)) {
usb2_set_frame_offset(xfer, REQ_SIZE, 1);
}
}
parm->size[0] += parm->bufsize;
/* align data again */
parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
}
/*
* Compute maximum buffer size
*/
if (parm->bufsize_max < parm->bufsize) {
parm->bufsize_max = parm->bufsize;
}
#if USB_HAVE_BUSDMA
if (xfer->flags_int.bdma_enable) {
/*
* Setup "dma_page_ptr".
*
* Proof for formula below:
*
* Assume there are three USB frames having length "a", "b" and
* "c". These USB frames will at maximum need "z"
* "usb2_page" structures. "z" is given by:
*
* z = ((a / USB_PAGE_SIZE) + 2) + ((b / USB_PAGE_SIZE) + 2) +
* ((c / USB_PAGE_SIZE) + 2);
*
* Constraining "a", "b" and "c" like this:
*
* (a + b + c) <= parm->bufsize
*
* We know that:
*
* z <= ((parm->bufsize / USB_PAGE_SIZE) + (3*2));
*
* Here is the general formula:
*/
xfer->dma_page_ptr = parm->dma_page_ptr;
parm->dma_page_ptr += (2 * n_frbuffers);
parm->dma_page_ptr += (parm->bufsize / USB_PAGE_SIZE);
}
#endif
if (zmps) {
/* correct maximum data length */
xfer->max_data_length = 0;
}
/* subtract USB frame remainder from "hc_max_frame_size" */
xfer->max_hc_frame_size =
(parm->hc_max_frame_size -
(parm->hc_max_frame_size % xfer->max_frame_size));
if (xfer->max_hc_frame_size == 0) {
parm->err = USB_ERR_INVAL;
goto done;
}
/* initialize max frame count */
xfer->max_frame_count = xfer->nframes;
/* initialize frame buffers */
if (parm->buf) {
for (x = 0; x != n_frbuffers; x++) {
xfer->frbuffers[x].tag_parent =
&xfer->xroot->dma_parent_tag;
#if USB_HAVE_BUSDMA
if (xfer->flags_int.bdma_enable &&
(parm->bufsize_max > 0)) {
if (usb2_pc_dmamap_create(
xfer->frbuffers + x,
parm->bufsize_max)) {
parm->err = USB_ERR_NOMEM;
goto done;
}
}
#endif
}
}
done:
if (parm->err) {
/*
* Set some dummy values so that we avoid division by zero:
*/
xfer->max_hc_frame_size = 1;
xfer->max_frame_size = 1;
xfer->max_packet_size = 1;
xfer->max_data_length = 0;
xfer->nframes = 0;
xfer->max_frame_count = 0;
}
}
/*------------------------------------------------------------------------*
* usb2_transfer_setup - setup an array of USB transfers
*
* NOTE: You must always call "usb2_transfer_unsetup" after calling
* "usb2_transfer_setup" if success was returned.
*
* The idea is that the USB device driver should pre-allocate all its
* transfers by one call to this function.
*
* Return values:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
usb2_error_t
usb2_transfer_setup(struct usb2_device *udev,
const uint8_t *ifaces, struct usb2_xfer **ppxfer,
const struct usb2_config *setup_start, uint16_t n_setup,
void *priv_sc, struct mtx *xfer_mtx)
{
struct usb2_xfer dummy;
struct usb2_setup_params parm;
const struct usb2_config *setup_end = setup_start + n_setup;
const struct usb2_config *setup;
struct usb2_pipe *pipe;
struct usb2_xfer_root *info;
struct usb2_xfer *xfer;
void *buf = NULL;
uint16_t n;
uint16_t refcount;
parm.err = 0;
refcount = 0;
info = NULL;
WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL,
"usb2_transfer_setup can sleep!");
/* do some checking first */
if (n_setup == 0) {
DPRINTFN(6, "setup array has zero length!\n");
return (USB_ERR_INVAL);
}
if (ifaces == 0) {
DPRINTFN(6, "ifaces array is NULL!\n");
return (USB_ERR_INVAL);
}
if (xfer_mtx == NULL) {
DPRINTFN(6, "using global lock\n");
xfer_mtx = &Giant;
}
/* sanity checks */
for (setup = setup_start, n = 0;
setup != setup_end; setup++, n++) {
if (setup->bufsize == (usb2_frlength_t)-1) {
parm.err = USB_ERR_BAD_BUFSIZE;
DPRINTF("invalid bufsize\n");
}
if (setup->callback == NULL) {
parm.err = USB_ERR_NO_CALLBACK;
DPRINTF("no callback\n");
}
ppxfer[n] = NULL;
}
if (parm.err) {
goto done;
}
bzero(&parm, sizeof(parm));
parm.udev = udev;
parm.speed = usb2_get_speed(udev);
parm.hc_max_packet_count = 1;
if (parm.speed >= USB_SPEED_MAX) {
parm.err = USB_ERR_INVAL;
goto done;
}
/* setup all transfers */
while (1) {
if (buf) {
/*
* Initialize the "usb2_xfer_root" structure,
* which is common for all our USB transfers.
*/
info = USB_ADD_BYTES(buf, 0);
info->memory_base = buf;
info->memory_size = parm.size[0];
#if USB_HAVE_BUSDMA
info->dma_page_cache_start = USB_ADD_BYTES(buf, parm.size[4]);
info->dma_page_cache_end = USB_ADD_BYTES(buf, parm.size[5]);
#endif
info->xfer_page_cache_start = USB_ADD_BYTES(buf, parm.size[5]);
info->xfer_page_cache_end = USB_ADD_BYTES(buf, parm.size[2]);
usb2_cv_init(&info->cv_drain, "WDRAIN");
info->xfer_mtx = xfer_mtx;
#if USB_HAVE_BUSDMA
usb2_dma_tag_setup(&info->dma_parent_tag,
parm.dma_tag_p, udev->bus->dma_parent_tag[0].tag,
xfer_mtx, &usb2_bdma_done_event, 32, parm.dma_tag_max);
#endif
info->bus = udev->bus;
info->udev = udev;
TAILQ_INIT(&info->done_q.head);
info->done_q.command = &usb2_callback_wrapper;
#if USB_HAVE_BUSDMA
TAILQ_INIT(&info->dma_q.head);
info->dma_q.command = &usb2_bdma_work_loop;
#endif
info->done_m[0].hdr.pm_callback = &usb2_callback_proc;
info->done_m[0].xroot = info;
info->done_m[1].hdr.pm_callback = &usb2_callback_proc;
info->done_m[1].xroot = info;
/*
* In device side mode control endpoint
* requests need to run from a separate
* context, else there is a chance of
* deadlock!
*/
if (setup_start == usb2_control_ep_cfg)
info->done_p =
&udev->bus->control_xfer_proc;
else if (xfer_mtx == &Giant)
info->done_p =
&udev->bus->giant_callback_proc;
else
info->done_p =
&udev->bus->non_giant_callback_proc;
}
/* reset sizes */
parm.size[0] = 0;
parm.buf = buf;
parm.size[0] += sizeof(info[0]);
for (setup = setup_start, n = 0;
setup != setup_end; setup++, n++) {
/* skip USB transfers without callbacks: */
if (setup->callback == NULL) {
continue;
}
/* see if there is a matching endpoint */
pipe = usb2_get_pipe(udev,
ifaces[setup->if_index], setup);
if ((pipe == NULL) || (pipe->methods == NULL)) {
if (setup->flags.no_pipe_ok)
continue;
if ((setup->usb_mode != USB_MODE_DUAL) &&
(setup->usb_mode != udev->flags.usb_mode))
continue;
parm.err = USB_ERR_NO_PIPE;
goto done;
}
/* align data properly */
parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1));
/* store current setup pointer */
parm.curr_setup = setup;
if (buf) {
/*
* Common initialization of the
* "usb2_xfer" structure.
*/
xfer = USB_ADD_BYTES(buf, parm.size[0]);
xfer->address = udev->address;
xfer->priv_sc = priv_sc;
xfer->xroot = info;
usb2_callout_init_mtx(&xfer->timeout_handle,
&udev->bus->bus_mtx, 0);
} else {
/*
* Setup a dummy xfer, hence we are
* writing to the "usb2_xfer"
* structure pointed to by "xfer"
* before we have allocated any
* memory:
*/
xfer = &dummy;
bzero(&dummy, sizeof(dummy));
refcount++;
}
/* set transfer pipe pointer */
xfer->pipe = pipe;
parm.size[0] += sizeof(xfer[0]);
parm.methods = xfer->pipe->methods;
parm.curr_xfer = xfer;
/*
* Call the Host or Device controller transfer
* setup routine:
*/
(udev->bus->methods->xfer_setup) (&parm);
/* check for error */
if (parm.err)
goto done;
if (buf) {
/*
* Increment the pipe refcount. This
* basically prevents setting a new
* configuration and alternate setting
* when USB transfers are in use on
* the given interface. Search the USB
* code for "pipe->refcount" if you
* want more information.
*/
xfer->pipe->refcount++;
/*
* Whenever we set ppxfer[] then we
* also need to increment the
* "setup_refcount":
*/
info->setup_refcount++;
/*
* Transfer is successfully setup and
* can be used:
*/
ppxfer[n] = xfer;
}
}
if (buf || parm.err) {
goto done;
}
if (refcount == 0) {
/* no transfers - nothing to do ! */
goto done;
}
/* align data properly */
parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1));
/* store offset temporarily */
parm.size[1] = parm.size[0];
/*
* The number of DMA tags required depends on
* the number of endpoints. The current estimate
* for maximum number of DMA tags per endpoint
* is two.
*/
parm.dma_tag_max += 2 * MIN(n_setup, USB_EP_MAX);
/*
* DMA tags for QH, TD, Data and more.
*/
parm.dma_tag_max += 8;
parm.dma_tag_p += parm.dma_tag_max;
parm.size[0] += ((uint8_t *)parm.dma_tag_p) -
((uint8_t *)0);
/* align data properly */
parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1));
/* store offset temporarily */
parm.size[3] = parm.size[0];
parm.size[0] += ((uint8_t *)parm.dma_page_ptr) -
((uint8_t *)0);
/* align data properly */
parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1));
/* store offset temporarily */
parm.size[4] = parm.size[0];
parm.size[0] += ((uint8_t *)parm.dma_page_cache_ptr) -
((uint8_t *)0);
/* store end offset temporarily */
parm.size[5] = parm.size[0];
parm.size[0] += ((uint8_t *)parm.xfer_page_cache_ptr) -
((uint8_t *)0);
/* store end offset temporarily */
parm.size[2] = parm.size[0];
/* align data properly */
parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1));
parm.size[6] = parm.size[0];
parm.size[0] += ((uint8_t *)parm.xfer_length_ptr) -
((uint8_t *)0);
/* align data properly */
parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1));
/* allocate zeroed memory */
buf = malloc(parm.size[0], M_USB, M_WAITOK | M_ZERO);
if (buf == NULL) {
parm.err = USB_ERR_NOMEM;
DPRINTFN(0, "cannot allocate memory block for "
"configuration (%d bytes)\n",
parm.size[0]);
goto done;
}
parm.dma_tag_p = USB_ADD_BYTES(buf, parm.size[1]);
parm.dma_page_ptr = USB_ADD_BYTES(buf, parm.size[3]);
parm.dma_page_cache_ptr = USB_ADD_BYTES(buf, parm.size[4]);
parm.xfer_page_cache_ptr = USB_ADD_BYTES(buf, parm.size[5]);
parm.xfer_length_ptr = USB_ADD_BYTES(buf, parm.size[6]);
}
done:
if (buf) {
if (info->setup_refcount == 0) {
/*
* "usb2_transfer_unsetup_sub" will unlock
* the bus mutex before returning !
*/
USB_BUS_LOCK(info->bus);
/* something went wrong */
usb2_transfer_unsetup_sub(info, 0);
}
}
if (parm.err) {
usb2_transfer_unsetup(ppxfer, n_setup);
}
return (parm.err);
}
/*------------------------------------------------------------------------*
* usb2_transfer_unsetup_sub - factored out code
*------------------------------------------------------------------------*/
static void
usb2_transfer_unsetup_sub(struct usb2_xfer_root *info, uint8_t needs_delay)
{
struct usb2_page_cache *pc;
USB_BUS_LOCK_ASSERT(info->bus, MA_OWNED);
/* wait for any outstanding DMA operations */
if (needs_delay) {
usb2_timeout_t temp;
temp = usb2_get_dma_delay(info->bus);
usb2_pause_mtx(&info->bus->bus_mtx,
USB_MS_TO_TICKS(temp));
}
/* make sure that our done messages are not queued anywhere */
usb2_proc_mwait(info->done_p, &info->done_m[0], &info->done_m[1]);
USB_BUS_UNLOCK(info->bus);
#if USB_HAVE_BUSDMA
/* free DMA'able memory, if any */
pc = info->dma_page_cache_start;
while (pc != info->dma_page_cache_end) {
usb2_pc_free_mem(pc);
pc++;
}
/* free DMA maps in all "xfer->frbuffers" */
pc = info->xfer_page_cache_start;
while (pc != info->xfer_page_cache_end) {
usb2_pc_dmamap_destroy(pc);
pc++;
}
/* free all DMA tags */
usb2_dma_tag_unsetup(&info->dma_parent_tag);
#endif
usb2_cv_destroy(&info->cv_drain);
/*
* free the "memory_base" last, hence the "info" structure is
* contained within the "memory_base"!
*/
free(info->memory_base, M_USB);
}
/*------------------------------------------------------------------------*
* usb2_transfer_unsetup - unsetup/free an array of USB transfers
*
* NOTE: All USB transfers in progress will get called back passing
* the error code "USB_ERR_CANCELLED" before this function
* returns.
*------------------------------------------------------------------------*/
void
usb2_transfer_unsetup(struct usb2_xfer **pxfer, uint16_t n_setup)
{
struct usb2_xfer *xfer;
struct usb2_xfer_root *info;
uint8_t needs_delay = 0;
WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL,
"usb2_transfer_unsetup can sleep!");
while (n_setup--) {
xfer = pxfer[n_setup];
if (xfer == NULL)
continue;
info = xfer->xroot;
USB_XFER_LOCK(xfer);
USB_BUS_LOCK(info->bus);
/*
* HINT: when you start/stop a transfer, it might be a
* good idea to directly use the "pxfer[]" structure:
*
* usb2_transfer_start(sc->pxfer[0]);
* usb2_transfer_stop(sc->pxfer[0]);
*
* That way, if your code has many parts that will not
* stop running under the same lock, in other words
* "xfer_mtx", the usb2_transfer_start and
* usb2_transfer_stop functions will simply return
* when they detect a NULL pointer argument.
*
* To avoid any races we clear the "pxfer[]" pointer
* while holding the private mutex of the driver:
*/
pxfer[n_setup] = NULL;
USB_BUS_UNLOCK(info->bus);
USB_XFER_UNLOCK(xfer);
usb2_transfer_drain(xfer);
#if USB_HAVE_BUSDMA
if (xfer->flags_int.bdma_enable)
needs_delay = 1;
#endif
/*
* NOTE: default pipe does not have an
* interface, even if pipe->iface_index == 0
*/
xfer->pipe->refcount--;
usb2_callout_drain(&xfer->timeout_handle);
USB_BUS_LOCK(info->bus);
USB_ASSERT(info->setup_refcount != 0, ("Invalid setup "
"reference count!\n"));
info->setup_refcount--;
if (info->setup_refcount == 0) {
usb2_transfer_unsetup_sub(info,
needs_delay);
} else {
USB_BUS_UNLOCK(info->bus);
}
}
}
/*------------------------------------------------------------------------*
* usb2_control_transfer_init - factored out code
*
* In USB Device Mode we have to wait for the SETUP packet which
* containst the "struct usb2_device_request" structure, before we can
* transfer any data. In USB Host Mode we already have the SETUP
* packet at the moment the USB transfer is started. This leads us to
* having to setup the USB transfer at two different places in
* time. This function just contains factored out control transfer
* initialisation code, so that we don't duplicate the code.
*------------------------------------------------------------------------*/
static void
usb2_control_transfer_init(struct usb2_xfer *xfer)
{
struct usb2_device_request req;
/* copy out the USB request header */
usb2_copy_out(xfer->frbuffers, 0, &req, sizeof(req));
/* setup remainder */
xfer->flags_int.control_rem = UGETW(req.wLength);
/* copy direction to endpoint variable */
xfer->endpoint &= ~(UE_DIR_IN | UE_DIR_OUT);
xfer->endpoint |=
(req.bmRequestType & UT_READ) ? UE_DIR_IN : UE_DIR_OUT;
}
/*------------------------------------------------------------------------*
* usb2_start_hardware_sub
*
* This function handles initialisation of control transfers. Control
* transfers are special in that regard that they can both transmit
* and receive data.
*
* Return values:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
static uint8_t
usb2_start_hardware_sub(struct usb2_xfer *xfer)
{
usb2_frlength_t len;
/* Check for control endpoint stall */
if (xfer->flags.stall_pipe && xfer->flags_int.control_act) {
/* the control transfer is no longer active */
xfer->flags_int.control_stall = 1;
xfer->flags_int.control_act = 0;
} else {
/* don't stall control transfer by default */
xfer->flags_int.control_stall = 0;
}
/* Check for invalid number of frames */
if (xfer->nframes > 2) {
/*
* If you need to split a control transfer, you
* have to do one part at a time. Only with
* non-control transfers you can do multiple
* parts a time.
*/
DPRINTFN(0, "Too many frames: %u\n",
(unsigned int)xfer->nframes);
goto error;
}
/*
* Check if there is a control
* transfer in progress:
*/
if (xfer->flags_int.control_act) {
if (xfer->flags_int.control_hdr) {
/* clear send header flag */
xfer->flags_int.control_hdr = 0;
/* setup control transfer */
if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
usb2_control_transfer_init(xfer);
}
}
/* get data length */
len = xfer->sumlen;
} else {
/* the size of the SETUP structure is hardcoded ! */
if (xfer->frlengths[0] != sizeof(struct usb2_device_request)) {
DPRINTFN(0, "Wrong framelength %u != %zu\n",
xfer->frlengths[0], sizeof(struct
usb2_device_request));
goto error;
}
/* check USB mode */
if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
/* check number of frames */
if (xfer->nframes != 1) {
/*
* We need to receive the setup
* message first so that we know the
* data direction!
*/
DPRINTF("Misconfigured transfer\n");
goto error;
}
/*
* Set a dummy "control_rem" value. This
* variable will be overwritten later by a
* call to "usb2_control_transfer_init()" !
*/
xfer->flags_int.control_rem = 0xFFFF;
} else {
/* setup "endpoint" and "control_rem" */
usb2_control_transfer_init(xfer);
}
/* set transfer-header flag */
xfer->flags_int.control_hdr = 1;
/* get data length */
len = (xfer->sumlen - sizeof(struct usb2_device_request));
}
/* check if there is a length mismatch */
if (len > xfer->flags_int.control_rem) {
DPRINTFN(0, "Length greater than remaining length!\n");
goto error;
}
/* check if we are doing a short transfer */
if (xfer->flags.force_short_xfer) {
xfer->flags_int.control_rem = 0;
} else {
if ((len != xfer->max_data_length) &&
(len != xfer->flags_int.control_rem) &&
(xfer->nframes != 1)) {
DPRINTFN(0, "Short control transfer without "
"force_short_xfer set!\n");
goto error;
}
xfer->flags_int.control_rem -= len;
}
/* the status part is executed when "control_act" is 0 */
if ((xfer->flags_int.control_rem > 0) ||
(xfer->flags.manual_status)) {
/* don't execute the STATUS stage yet */
xfer->flags_int.control_act = 1;
/* sanity check */
if ((!xfer->flags_int.control_hdr) &&
(xfer->nframes == 1)) {
/*
* This is not a valid operation!
*/
DPRINTFN(0, "Invalid parameter "
"combination\n");
goto error;
}
} else {
/* time to execute the STATUS stage */
xfer->flags_int.control_act = 0;
}
return (0); /* success */
error:
return (1); /* failure */
}
/*------------------------------------------------------------------------*
* usb2_start_hardware - start USB hardware for the given transfer
*
* This function should only be called from the USB callback.
*------------------------------------------------------------------------*/
void
usb2_start_hardware(struct usb2_xfer *xfer)
{
struct usb2_xfer_root *info;
struct usb2_bus *bus;
usb2_frcount_t x;
info = xfer->xroot;
bus = info->bus;
DPRINTF("xfer=%p, pipe=%p, nframes=%d, dir=%s\n",
xfer, xfer->pipe, xfer->nframes, USB_GET_DATA_ISREAD(xfer) ?
"read" : "write");
#if USB_DEBUG
if (USB_DEBUG_VAR > 0) {
USB_BUS_LOCK(bus);
usb2_dump_pipe(xfer->pipe);
USB_BUS_UNLOCK(bus);
}
#endif
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
USB_BUS_LOCK_ASSERT(bus, MA_NOTOWNED);
/* Only open the USB transfer once! */
if (!xfer->flags_int.open) {
xfer->flags_int.open = 1;
DPRINTF("open\n");
USB_BUS_LOCK(bus);
(xfer->pipe->methods->open) (xfer);
USB_BUS_UNLOCK(bus);
}
/* set "transferring" flag */
xfer->flags_int.transferring = 1;
#if USB_HAVE_POWERD
/* increment power reference */
usb2_transfer_power_ref(xfer, 1);
#endif
/*
* Check if the transfer is waiting on a queue, most
* frequently the "done_q":
*/
if (xfer->wait_queue) {
USB_BUS_LOCK(bus);
usb2_transfer_dequeue(xfer);
USB_BUS_UNLOCK(bus);
}
/* clear "did_dma_delay" flag */
xfer->flags_int.did_dma_delay = 0;
/* clear "did_close" flag */
xfer->flags_int.did_close = 0;
#if USB_HAVE_BUSDMA
/* clear "bdma_setup" flag */
xfer->flags_int.bdma_setup = 0;
#endif
/* by default we cannot cancel any USB transfer immediately */
xfer->flags_int.can_cancel_immed = 0;
/* clear lengths and frame counts by default */
xfer->sumlen = 0;
xfer->actlen = 0;
xfer->aframes = 0;
/* clear any previous errors */
xfer->error = 0;
/* Check if the device is still alive */
if (info->udev->state < USB_STATE_POWERED) {
USB_BUS_LOCK(bus);
/*
* Must return cancelled error code else
* device drivers can hang.
*/
usb2_transfer_done(xfer, USB_ERR_CANCELLED);
USB_BUS_UNLOCK(bus);
return;
}
/* sanity check */
if (xfer->nframes == 0) {
if (xfer->flags.stall_pipe) {
/*
* Special case - want to stall without transferring
* any data:
*/
DPRINTF("xfer=%p nframes=0: stall "
"or clear stall!\n", xfer);
USB_BUS_LOCK(bus);
xfer->flags_int.can_cancel_immed = 1;
/* start the transfer */
usb2_command_wrapper(&xfer->pipe->pipe_q, xfer);
USB_BUS_UNLOCK(bus);
return;
}
USB_BUS_LOCK(bus);
usb2_transfer_done(xfer, USB_ERR_INVAL);
USB_BUS_UNLOCK(bus);
return;
}
/* compute total transfer length */
for (x = 0; x != xfer->nframes; x++) {
xfer->sumlen += xfer->frlengths[x];
if (xfer->sumlen < xfer->frlengths[x]) {
/* length wrapped around */
USB_BUS_LOCK(bus);
usb2_transfer_done(xfer, USB_ERR_INVAL);
USB_BUS_UNLOCK(bus);
return;
}
}
/* clear some internal flags */
xfer->flags_int.short_xfer_ok = 0;
xfer->flags_int.short_frames_ok = 0;
/* check if this is a control transfer */
if (xfer->flags_int.control_xfr) {
if (usb2_start_hardware_sub(xfer)) {
USB_BUS_LOCK(bus);
usb2_transfer_done(xfer, USB_ERR_STALLED);
USB_BUS_UNLOCK(bus);
return;
}
}
/*
* Setup filtered version of some transfer flags,
* in case of data read direction
*/
if (USB_GET_DATA_ISREAD(xfer)) {
if (xfer->flags.short_frames_ok) {
xfer->flags_int.short_xfer_ok = 1;
xfer->flags_int.short_frames_ok = 1;
} else if (xfer->flags.short_xfer_ok) {
xfer->flags_int.short_xfer_ok = 1;
/* check for control transfer */
if (xfer->flags_int.control_xfr) {
/*
* 1) Control transfers do not support
* reception of multiple short USB
* frames in host mode and device side
* mode, with exception of:
*
* 2) Due to sometimes buggy device
* side firmware we need to do a
* STATUS stage in case of short
* control transfers in USB host mode.
* The STATUS stage then becomes the
* "alt_next" to the DATA stage.
*/
xfer->flags_int.short_frames_ok = 1;
}
}
}
/*
* Check if BUS-DMA support is enabled and try to load virtual
* buffers into DMA, if any:
*/
#if USB_HAVE_BUSDMA
if (xfer->flags_int.bdma_enable) {
/* insert the USB transfer last in the BUS-DMA queue */
usb2_command_wrapper(&xfer->xroot->dma_q, xfer);
return;
}
#endif
/*
* Enter the USB transfer into the Host Controller or
* Device Controller schedule:
*/
usb2_pipe_enter(xfer);
}
/*------------------------------------------------------------------------*
* usb2_pipe_enter - factored out code
*------------------------------------------------------------------------*/
void
usb2_pipe_enter(struct usb2_xfer *xfer)
{
struct usb2_pipe *pipe;
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
USB_BUS_LOCK(xfer->xroot->bus);
pipe = xfer->pipe;
DPRINTF("enter\n");
/* enter the transfer */
(pipe->methods->enter) (xfer);
xfer->flags_int.can_cancel_immed = 1;
/* check for transfer error */
if (xfer->error) {
/* some error has happened */
usb2_transfer_done(xfer, 0);
USB_BUS_UNLOCK(xfer->xroot->bus);
return;
}
/* start the transfer */
usb2_command_wrapper(&pipe->pipe_q, xfer);
USB_BUS_UNLOCK(xfer->xroot->bus);
}
/*------------------------------------------------------------------------*
* usb2_transfer_start - start an USB transfer
*
* NOTE: Calling this function more than one time will only
* result in a single transfer start, until the USB transfer
* completes.
*------------------------------------------------------------------------*/
void
usb2_transfer_start(struct usb2_xfer *xfer)
{
if (xfer == NULL) {
/* transfer is gone */
return;
}
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
/* mark the USB transfer started */
if (!xfer->flags_int.started) {
xfer->flags_int.started = 1;
}
/* check if the USB transfer callback is already transferring */
if (xfer->flags_int.transferring) {
return;
}
USB_BUS_LOCK(xfer->xroot->bus);
/* call the USB transfer callback */
usb2_callback_ss_done_defer(xfer);
USB_BUS_UNLOCK(xfer->xroot->bus);
}
/*------------------------------------------------------------------------*
* usb2_transfer_stop - stop an USB transfer
*
* NOTE: Calling this function more than one time will only
* result in a single transfer stop.
* NOTE: When this function returns it is not safe to free nor
* reuse any DMA buffers. See "usb2_transfer_drain()".
*------------------------------------------------------------------------*/
void
usb2_transfer_stop(struct usb2_xfer *xfer)
{
struct usb2_pipe *pipe;
if (xfer == NULL) {
/* transfer is gone */
return;
}
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
/* check if the USB transfer was ever opened */
if (!xfer->flags_int.open) {
/* nothing to do except clearing the "started" flag */
xfer->flags_int.started = 0;
return;
}
/* try to stop the current USB transfer */
USB_BUS_LOCK(xfer->xroot->bus);
xfer->error = USB_ERR_CANCELLED;/* override any previous error */
/*
* Clear "open" and "started" when both private and USB lock
* is locked so that we don't get a race updating "flags_int"
*/
xfer->flags_int.open = 0;
xfer->flags_int.started = 0;
/*
* Check if we can cancel the USB transfer immediately.
*/
if (xfer->flags_int.transferring) {
if (xfer->flags_int.can_cancel_immed &&
(!xfer->flags_int.did_close)) {
DPRINTF("close\n");
/*
* The following will lead to an USB_ERR_CANCELLED
* error code being passed to the USB callback.
*/
(xfer->pipe->methods->close) (xfer);
/* only close once */
xfer->flags_int.did_close = 1;
} else {
/* need to wait for the next done callback */
}
} else {
DPRINTF("close\n");
/* close here and now */
(xfer->pipe->methods->close) (xfer);
/*
* Any additional DMA delay is done by
* "usb2_transfer_unsetup()".
*/
/*
* Special case. Check if we need to restart a blocked
* pipe.
*/
pipe = xfer->pipe;
/*
* If the current USB transfer is completing we need
* to start the next one:
*/
if (pipe->pipe_q.curr == xfer) {
usb2_command_wrapper(&pipe->pipe_q, NULL);
}
}
USB_BUS_UNLOCK(xfer->xroot->bus);
}
/*------------------------------------------------------------------------*
* usb2_transfer_pending
*
* This function will check if an USB transfer is pending which is a
* little bit complicated!
* Return values:
* 0: Not pending
* 1: Pending: The USB transfer will receive a callback in the future.
*------------------------------------------------------------------------*/
uint8_t
usb2_transfer_pending(struct usb2_xfer *xfer)
{
struct usb2_xfer_root *info;
struct usb2_xfer_queue *pq;
if (xfer == NULL) {
/* transfer is gone */
return (0);
}
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
if (xfer->flags_int.transferring) {
/* trivial case */
return (1);
}
USB_BUS_LOCK(xfer->xroot->bus);
if (xfer->wait_queue) {
/* we are waiting on a queue somewhere */
USB_BUS_UNLOCK(xfer->xroot->bus);
return (1);
}
info = xfer->xroot;
pq = &info->done_q;
if (pq->curr == xfer) {
/* we are currently scheduled for callback */
USB_BUS_UNLOCK(xfer->xroot->bus);
return (1);
}
/* we are not pending */
USB_BUS_UNLOCK(xfer->xroot->bus);
return (0);
}
/*------------------------------------------------------------------------*
* usb2_transfer_drain
*
* This function will stop the USB transfer and wait for any
* additional BUS-DMA and HW-DMA operations to complete. Buffers that
* are loaded into DMA can safely be freed or reused after that this
* function has returned.
*------------------------------------------------------------------------*/
void
usb2_transfer_drain(struct usb2_xfer *xfer)
{
WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL,
"usb2_transfer_drain can sleep!");
if (xfer == NULL) {
/* transfer is gone */
return;
}
if (xfer->xroot->xfer_mtx != &Giant) {
USB_XFER_LOCK_ASSERT(xfer, MA_NOTOWNED);
}
USB_XFER_LOCK(xfer);
usb2_transfer_stop(xfer);
while (usb2_transfer_pending(xfer)) {
xfer->flags_int.draining = 1;
/*
* Wait until the current outstanding USB
* transfer is complete !
*/
usb2_cv_wait(&xfer->xroot->cv_drain, xfer->xroot->xfer_mtx);
}
USB_XFER_UNLOCK(xfer);
}
/*------------------------------------------------------------------------*
* usb2_set_frame_data
*
* This function sets the pointer of the buffer that should
* loaded directly into DMA for the given USB frame. Passing "ptr"
* equal to NULL while the corresponding "frlength" is greater
* than zero gives undefined results!
*------------------------------------------------------------------------*/
void
usb2_set_frame_data(struct usb2_xfer *xfer, void *ptr, usb2_frcount_t frindex)
{
/* set virtual address to load and length */
xfer->frbuffers[frindex].buffer = ptr;
}
/*------------------------------------------------------------------------*
* usb2_set_frame_offset
*
* This function sets the frame data buffer offset relative to the beginning
* of the USB DMA buffer allocated for this USB transfer.
*------------------------------------------------------------------------*/
void
usb2_set_frame_offset(struct usb2_xfer *xfer, usb2_frlength_t offset,
usb2_frcount_t frindex)
{
USB_ASSERT(!xfer->flags.ext_buffer, ("Cannot offset data frame "
"when the USB buffer is external!\n"));
/* set virtual address to load */
xfer->frbuffers[frindex].buffer =
USB_ADD_BYTES(xfer->local_buffer, offset);
}
/*------------------------------------------------------------------------*
* usb2_callback_proc - factored out code
*
* This function performs USB callbacks.
*------------------------------------------------------------------------*/
static void
usb2_callback_proc(struct usb2_proc_msg *_pm)
{
struct usb2_done_msg *pm = (void *)_pm;
struct usb2_xfer_root *info = pm->xroot;
/* Change locking order */
USB_BUS_UNLOCK(info->bus);
/*
* We exploit the fact that the mutex is the same for all
* callbacks that will be called from this thread:
*/
mtx_lock(info->xfer_mtx);
USB_BUS_LOCK(info->bus);
/* Continue where we lost track */
usb2_command_wrapper(&info->done_q,
info->done_q.curr);
mtx_unlock(info->xfer_mtx);
}
/*------------------------------------------------------------------------*
* usb2_callback_ss_done_defer
*
* This function will defer the start, stop and done callback to the
* correct thread.
*------------------------------------------------------------------------*/
static void
usb2_callback_ss_done_defer(struct usb2_xfer *xfer)
{
struct usb2_xfer_root *info = xfer->xroot;
struct usb2_xfer_queue *pq = &info->done_q;
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
if (pq->curr != xfer) {
usb2_transfer_enqueue(pq, xfer);
}
if (!pq->recurse_1) {
/*
* We have to postpone the callback due to the fact we
* will have a Lock Order Reversal, LOR, if we try to
* proceed !
*/
if (usb2_proc_msignal(info->done_p,
&info->done_m[0], &info->done_m[1])) {
/* ignore */
}
} else {
/* clear second recurse flag */
pq->recurse_2 = 0;
}
return;
}
/*------------------------------------------------------------------------*
* usb2_callback_wrapper
*
* This is a wrapper for USB callbacks. This wrapper does some
* auto-magic things like figuring out if we can call the callback
* directly from the current context or if we need to wakeup the
* interrupt process.
*------------------------------------------------------------------------*/
static void
usb2_callback_wrapper(struct usb2_xfer_queue *pq)
{
struct usb2_xfer *xfer = pq->curr;
struct usb2_xfer_root *info = xfer->xroot;
USB_BUS_LOCK_ASSERT(info->bus, MA_OWNED);
if (!mtx_owned(info->xfer_mtx)) {
/*
* Cases that end up here:
*
* 5) HW interrupt done callback or other source.
*/
DPRINTFN(3, "case 5\n");
/*
* We have to postpone the callback due to the fact we
* will have a Lock Order Reversal, LOR, if we try to
* proceed !
*/
if (usb2_proc_msignal(info->done_p,
&info->done_m[0], &info->done_m[1])) {
/* ignore */
}
return;
}
/*
* Cases that end up here:
*
* 1) We are starting a transfer
* 2) We are prematurely calling back a transfer
* 3) We are stopping a transfer
* 4) We are doing an ordinary callback
*/
DPRINTFN(3, "case 1-4\n");
/* get next USB transfer in the queue */
info->done_q.curr = NULL;
USB_BUS_UNLOCK(info->bus);
USB_BUS_LOCK_ASSERT(info->bus, MA_NOTOWNED);
/* set correct USB state for callback */
if (!xfer->flags_int.transferring) {
xfer->usb2_state = USB_ST_SETUP;
if (!xfer->flags_int.started) {
/* we got stopped before we even got started */
USB_BUS_LOCK(info->bus);
goto done;
}
} else {
if (usb2_callback_wrapper_sub(xfer)) {
/* the callback has been deferred */
USB_BUS_LOCK(info->bus);
goto done;
}
#if USB_HAVE_POWERD
/* decrement power reference */
usb2_transfer_power_ref(xfer, -1);
#endif
xfer->flags_int.transferring = 0;
if (xfer->error) {
xfer->usb2_state = USB_ST_ERROR;
} else {
/* set transferred state */
xfer->usb2_state = USB_ST_TRANSFERRED;
#if USB_HAVE_BUSDMA
/* sync DMA memory, if any */
if (xfer->flags_int.bdma_enable &&
(!xfer->flags_int.bdma_no_post_sync)) {
usb2_bdma_post_sync(xfer);
}
#endif
}
}
/* call processing routine */
(xfer->callback) (xfer);
/* pickup the USB mutex again */
USB_BUS_LOCK(info->bus);
/*
* Check if we got started after that we got cancelled, but
* before we managed to do the callback.
*/
if ((!xfer->flags_int.open) &&
(xfer->flags_int.started) &&
(xfer->usb2_state == USB_ST_ERROR)) {
/* try to loop, but not recursivly */
usb2_command_wrapper(&info->done_q, xfer);
return;
}
done:
/*
* Check if we are draining.
*/
if (xfer->flags_int.draining &&
(!xfer->flags_int.transferring)) {
/* "usb2_transfer_drain()" is waiting for end of transfer */
xfer->flags_int.draining = 0;
usb2_cv_broadcast(&info->cv_drain);
}
/* do the next callback, if any */
usb2_command_wrapper(&info->done_q,
info->done_q.curr);
}
/*------------------------------------------------------------------------*
* usb2_dma_delay_done_cb
*
* This function is called when the DMA delay has been exectuded, and
* will make sure that the callback is called to complete the USB
* transfer. This code path is ususally only used when there is an USB
* error like USB_ERR_CANCELLED.
*------------------------------------------------------------------------*/
static void
usb2_dma_delay_done_cb(void *arg)
{
struct usb2_xfer *xfer = arg;
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
DPRINTFN(3, "Completed %p\n", xfer);
/* queue callback for execution, again */
usb2_transfer_done(xfer, 0);
}
/*------------------------------------------------------------------------*
* usb2_transfer_dequeue
*
* - This function is used to remove an USB transfer from a USB
* transfer queue.
*
* - This function can be called multiple times in a row.
*------------------------------------------------------------------------*/
void
usb2_transfer_dequeue(struct usb2_xfer *xfer)
{
struct usb2_xfer_queue *pq;
pq = xfer->wait_queue;
if (pq) {
TAILQ_REMOVE(&pq->head, xfer, wait_entry);
xfer->wait_queue = NULL;
}
}
/*------------------------------------------------------------------------*
* usb2_transfer_enqueue
*
* - This function is used to insert an USB transfer into a USB *
* transfer queue.
*
* - This function can be called multiple times in a row.
*------------------------------------------------------------------------*/
void
usb2_transfer_enqueue(struct usb2_xfer_queue *pq, struct usb2_xfer *xfer)
{
/*
* Insert the USB transfer into the queue, if it is not
* already on a USB transfer queue:
*/
if (xfer->wait_queue == NULL) {
xfer->wait_queue = pq;
TAILQ_INSERT_TAIL(&pq->head, xfer, wait_entry);
}
}
/*------------------------------------------------------------------------*
* usb2_transfer_done
*
* - This function is used to remove an USB transfer from the busdma,
* pipe or interrupt queue.
*
* - This function is used to queue the USB transfer on the done
* queue.
*
* - This function is used to stop any USB transfer timeouts.
*------------------------------------------------------------------------*/
void
usb2_transfer_done(struct usb2_xfer *xfer, usb2_error_t error)
{
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
DPRINTF("err=%s\n", usb2_errstr(error));
/*
* If we are not transferring then just return.
* This can happen during transfer cancel.
*/
if (!xfer->flags_int.transferring) {
DPRINTF("not transferring\n");
return;
}
/* only set transfer error if not already set */
if (!xfer->error) {
xfer->error = error;
}
/* stop any callouts */
usb2_callout_stop(&xfer->timeout_handle);
/*
* If we are waiting on a queue, just remove the USB transfer
* from the queue, if any. We should have the required locks
* locked to do the remove when this function is called.
*/
usb2_transfer_dequeue(xfer);
#if USB_HAVE_BUSDMA
if (mtx_owned(xfer->xroot->xfer_mtx)) {
struct usb2_xfer_queue *pq;
/*
* If the private USB lock is not locked, then we assume
* that the BUS-DMA load stage has been passed:
*/
pq = &xfer->xroot->dma_q;
if (pq->curr == xfer) {
/* start the next BUS-DMA load, if any */
usb2_command_wrapper(pq, NULL);
}
}
#endif
/* keep some statistics */
if (xfer->error) {
xfer->xroot->bus->stats_err.uds_requests
[xfer->pipe->edesc->bmAttributes & UE_XFERTYPE]++;
} else {
xfer->xroot->bus->stats_ok.uds_requests
[xfer->pipe->edesc->bmAttributes & UE_XFERTYPE]++;
}
/* call the USB transfer callback */
usb2_callback_ss_done_defer(xfer);
}
/*------------------------------------------------------------------------*
* usb2_transfer_start_cb
*
* This function is called to start the USB transfer when
* "xfer->interval" is greater than zero, and and the endpoint type is
* BULK or CONTROL.
*------------------------------------------------------------------------*/
static void
usb2_transfer_start_cb(void *arg)
{
struct usb2_xfer *xfer = arg;
struct usb2_pipe *pipe = xfer->pipe;
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
DPRINTF("start\n");
/* start the transfer */
(pipe->methods->start) (xfer);
xfer->flags_int.can_cancel_immed = 1;
/* check for error */
if (xfer->error) {
/* some error has happened */
usb2_transfer_done(xfer, 0);
}
}
/*------------------------------------------------------------------------*
* usb2_transfer_set_stall
*
* This function is used to set the stall flag outside the
* callback. This function is NULL safe.
*------------------------------------------------------------------------*/
void
usb2_transfer_set_stall(struct usb2_xfer *xfer)
{
if (xfer == NULL) {
/* tearing down */
return;
}
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
/* avoid any races by locking the USB mutex */
USB_BUS_LOCK(xfer->xroot->bus);
xfer->flags.stall_pipe = 1;
USB_BUS_UNLOCK(xfer->xroot->bus);
}
/*------------------------------------------------------------------------*
* usb2_transfer_clear_stall
*
* This function is used to clear the stall flag outside the
* callback. This function is NULL safe.
*------------------------------------------------------------------------*/
void
usb2_transfer_clear_stall(struct usb2_xfer *xfer)
{
if (xfer == NULL) {
/* tearing down */
return;
}
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
/* avoid any races by locking the USB mutex */
USB_BUS_LOCK(xfer->xroot->bus);
xfer->flags.stall_pipe = 0;
USB_BUS_UNLOCK(xfer->xroot->bus);
}
/*------------------------------------------------------------------------*
* usb2_pipe_start
*
* This function is used to add an USB transfer to the pipe transfer list.
*------------------------------------------------------------------------*/
void
usb2_pipe_start(struct usb2_xfer_queue *pq)
{
struct usb2_pipe *pipe;
struct usb2_xfer *xfer;
uint8_t type;
xfer = pq->curr;
pipe = xfer->pipe;
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
/*
* If the pipe is already stalled we do nothing !
*/
if (pipe->is_stalled) {
return;
}
/*
* Check if we are supposed to stall the pipe:
*/
if (xfer->flags.stall_pipe) {
/* clear stall command */
xfer->flags.stall_pipe = 0;
/*
* Only stall BULK and INTERRUPT endpoints.
*/
type = (pipe->edesc->bmAttributes & UE_XFERTYPE);
if ((type == UE_BULK) ||
(type == UE_INTERRUPT)) {
struct usb2_device *udev;
struct usb2_xfer_root *info;
info = xfer->xroot;
udev = info->udev;
pipe->is_stalled = 1;
if (udev->flags.usb_mode == USB_MODE_DEVICE) {
(udev->bus->methods->set_stall) (
udev, NULL, pipe);
} else if (udev->default_xfer[1]) {
info = udev->default_xfer[1]->xroot;
if (usb2_proc_msignal(
&info->bus->non_giant_callback_proc,
&udev->cs_msg[0], &udev->cs_msg[1])) {
/* ignore */
}
} else {
/* should not happen */
DPRINTFN(0, "No stall handler!\n");
}
/*
* We get started again when the stall is cleared!
*/
return;
}
}
/* Set or clear stall complete - special case */
if (xfer->nframes == 0) {
/* we are complete */
xfer->aframes = 0;
usb2_transfer_done(xfer, 0);
return;
}
/*
* Handled cases:
*
* 1) Start the first transfer queued.
*
* 2) Re-start the current USB transfer.
*/
/*
* Check if there should be any
* pre transfer start delay:
*/
if (xfer->interval > 0) {
type = (pipe->edesc->bmAttributes & UE_XFERTYPE);
if ((type == UE_BULK) ||
(type == UE_CONTROL)) {
usb2_transfer_timeout_ms(xfer,
&usb2_transfer_start_cb,
xfer->interval);
return;
}
}
DPRINTF("start\n");
/* start USB transfer */
(pipe->methods->start) (xfer);
xfer->flags_int.can_cancel_immed = 1;
/* check for error */
if (xfer->error) {
/* some error has happened */
usb2_transfer_done(xfer, 0);
}
}
/*------------------------------------------------------------------------*
* usb2_transfer_timeout_ms
*
* This function is used to setup a timeout on the given USB
* transfer. If the timeout has been deferred the callback given by
* "cb" will get called after "ms" milliseconds.
*------------------------------------------------------------------------*/
void
usb2_transfer_timeout_ms(struct usb2_xfer *xfer,
void (*cb) (void *arg), usb2_timeout_t ms)
{
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
/* defer delay */
usb2_callout_reset(&xfer->timeout_handle,
USB_MS_TO_TICKS(ms), cb, xfer);
}
/*------------------------------------------------------------------------*
* usb2_callback_wrapper_sub
*
* - This function will update variables in an USB transfer after
* that the USB transfer is complete.
*
* - This function is used to start the next USB transfer on the
* pipe transfer queue, if any.
*
* NOTE: In some special cases the USB transfer will not be removed from
* the pipe queue, but remain first. To enforce USB transfer removal call
* this function passing the error code "USB_ERR_CANCELLED".
*
* Return values:
* 0: Success.
* Else: The callback has been deferred.
*------------------------------------------------------------------------*/
static uint8_t
usb2_callback_wrapper_sub(struct usb2_xfer *xfer)
{
struct usb2_pipe *pipe;
usb2_frcount_t x;
if ((!xfer->flags_int.open) &&
(!xfer->flags_int.did_close)) {
DPRINTF("close\n");
USB_BUS_LOCK(xfer->xroot->bus);
(xfer->pipe->methods->close) (xfer);
USB_BUS_UNLOCK(xfer->xroot->bus);
/* only close once */
xfer->flags_int.did_close = 1;
return (1); /* wait for new callback */
}
/*
* If we have a non-hardware induced error we
* need to do the DMA delay!
*/
if (((xfer->error == USB_ERR_CANCELLED) ||
(xfer->error == USB_ERR_TIMEOUT)) &&
(!xfer->flags_int.did_dma_delay)) {
usb2_timeout_t temp;
/* only delay once */
xfer->flags_int.did_dma_delay = 1;
/* we can not cancel this delay */
xfer->flags_int.can_cancel_immed = 0;
temp = usb2_get_dma_delay(xfer->xroot->bus);
DPRINTFN(3, "DMA delay, %u ms, "
"on %p\n", temp, xfer);
if (temp != 0) {
USB_BUS_LOCK(xfer->xroot->bus);
usb2_transfer_timeout_ms(xfer,
&usb2_dma_delay_done_cb, temp);
USB_BUS_UNLOCK(xfer->xroot->bus);
return (1); /* wait for new callback */
}
}
/* check actual number of frames */
if (xfer->aframes > xfer->nframes) {
if (xfer->error == 0) {
panic("%s: actual number of frames, %d, is "
"greater than initial number of frames, %d!\n",
__FUNCTION__, xfer->aframes, xfer->nframes);
} else {
/* just set some valid value */
xfer->aframes = xfer->nframes;
}
}
/* compute actual length */
xfer->actlen = 0;
for (x = 0; x != xfer->aframes; x++) {
xfer->actlen += xfer->frlengths[x];
}
/*
* Frames that were not transferred get zero actual length in
* case the USB device driver does not check the actual number
* of frames transferred, "xfer->aframes":
*/
for (; x < xfer->nframes; x++) {
xfer->frlengths[x] = 0;
}
/* check actual length */
if (xfer->actlen > xfer->sumlen) {
if (xfer->error == 0) {
panic("%s: actual length, %d, is greater than "
"initial length, %d!\n",
__FUNCTION__, xfer->actlen, xfer->sumlen);
} else {
/* just set some valid value */
xfer->actlen = xfer->sumlen;
}
}
DPRINTFN(6, "xfer=%p pipe=%p sts=%d alen=%d, slen=%d, afrm=%d, nfrm=%d\n",
xfer, xfer->pipe, xfer->error, xfer->actlen, xfer->sumlen,
xfer->aframes, xfer->nframes);
if (xfer->error) {
/* end of control transfer, if any */
xfer->flags_int.control_act = 0;
/* check if we should block the execution queue */
if ((xfer->error != USB_ERR_CANCELLED) &&
(xfer->flags.pipe_bof)) {
DPRINTFN(2, "xfer=%p: Block On Failure "
"on pipe=%p\n", xfer, xfer->pipe);
goto done;
}
} else {
/* check for short transfers */
if (xfer->actlen < xfer->sumlen) {
/* end of control transfer, if any */
xfer->flags_int.control_act = 0;
if (!xfer->flags_int.short_xfer_ok) {
xfer->error = USB_ERR_SHORT_XFER;
if (xfer->flags.pipe_bof) {
DPRINTFN(2, "xfer=%p: Block On Failure on "
"Short Transfer on pipe %p.\n",
xfer, xfer->pipe);
goto done;
}
}
} else {
/*
* Check if we are in the middle of a
* control transfer:
*/
if (xfer->flags_int.control_act) {
DPRINTFN(5, "xfer=%p: Control transfer "
"active on pipe=%p\n", xfer, xfer->pipe);
goto done;
}
}
}
pipe = xfer->pipe;
/*
* If the current USB transfer is completing we need to start the
* next one:
*/
USB_BUS_LOCK(xfer->xroot->bus);
if (pipe->pipe_q.curr == xfer) {
usb2_command_wrapper(&pipe->pipe_q, NULL);
if (pipe->pipe_q.curr || TAILQ_FIRST(&pipe->pipe_q.head)) {
/* there is another USB transfer waiting */
} else {
/* this is the last USB transfer */
/* clear isochronous sync flag */
xfer->pipe->is_synced = 0;
}
}
USB_BUS_UNLOCK(xfer->xroot->bus);
done:
return (0);
}
/*------------------------------------------------------------------------*
* usb2_command_wrapper
*
* This function is used to execute commands non-recursivly on an USB
* transfer.
*------------------------------------------------------------------------*/
void
usb2_command_wrapper(struct usb2_xfer_queue *pq, struct usb2_xfer *xfer)
{
if (xfer) {
/*
* If the transfer is not already processing,
* queue it!
*/
if (pq->curr != xfer) {
usb2_transfer_enqueue(pq, xfer);
if (pq->curr != NULL) {
/* something is already processing */
DPRINTFN(6, "busy %p\n", pq->curr);
return;
}
}
} else {
/* Get next element in queue */
pq->curr = NULL;
}
if (!pq->recurse_1) {
do {
/* set both recurse flags */
pq->recurse_1 = 1;
pq->recurse_2 = 1;
if (pq->curr == NULL) {
xfer = TAILQ_FIRST(&pq->head);
if (xfer) {
TAILQ_REMOVE(&pq->head, xfer,
wait_entry);
xfer->wait_queue = NULL;
pq->curr = xfer;
} else {
break;
}
}
DPRINTFN(6, "cb %p (enter)\n", pq->curr);
(pq->command) (pq);
DPRINTFN(6, "cb %p (leave)\n", pq->curr);
} while (!pq->recurse_2);
/* clear first recurse flag */
pq->recurse_1 = 0;
} else {
/* clear second recurse flag */
pq->recurse_2 = 0;
}
}
/*------------------------------------------------------------------------*
* usb2_default_transfer_setup
*
* This function is used to setup the default USB control endpoint
* transfer.
*------------------------------------------------------------------------*/
void
usb2_default_transfer_setup(struct usb2_device *udev)
{
struct usb2_xfer *xfer;
uint8_t no_resetup;
uint8_t iface_index;
/* check for root HUB */
if (udev->parent_hub == NULL)
return;
repeat:
xfer = udev->default_xfer[0];
if (xfer) {
USB_XFER_LOCK(xfer);
no_resetup =
((xfer->address == udev->address) &&
(udev->default_ep_desc.wMaxPacketSize[0] ==
udev->ddesc.bMaxPacketSize));
if (udev->flags.usb_mode == USB_MODE_DEVICE) {
if (no_resetup) {
/*
* NOTE: checking "xfer->address" and
* starting the USB transfer must be
* atomic!
*/
usb2_transfer_start(xfer);
}
}
USB_XFER_UNLOCK(xfer);
} else {
no_resetup = 0;
}
if (no_resetup) {
/*
* All parameters are exactly the same like before.
* Just return.
*/
return;
}
/*
* Update wMaxPacketSize for the default control endpoint:
*/
udev->default_ep_desc.wMaxPacketSize[0] =
udev->ddesc.bMaxPacketSize;
/*
* Unsetup any existing USB transfer:
*/
usb2_transfer_unsetup(udev->default_xfer, USB_DEFAULT_XFER_MAX);
/*
* Try to setup a new USB transfer for the
* default control endpoint:
*/
iface_index = 0;
if (usb2_transfer_setup(udev, &iface_index,
udev->default_xfer, usb2_control_ep_cfg, USB_DEFAULT_XFER_MAX, NULL,
udev->default_mtx)) {
DPRINTFN(0, "could not setup default "
"USB transfer!\n");
} else {
goto repeat;
}
}
/*------------------------------------------------------------------------*
* usb2_clear_data_toggle - factored out code
*
* NOTE: the intention of this function is not to reset the hardware
* data toggle.
*------------------------------------------------------------------------*/
void
usb2_clear_data_toggle(struct usb2_device *udev, struct usb2_pipe *pipe)
{
DPRINTFN(5, "udev=%p pipe=%p\n", udev, pipe);
USB_BUS_LOCK(udev->bus);
pipe->toggle_next = 0;
USB_BUS_UNLOCK(udev->bus);
}
/*------------------------------------------------------------------------*
* usb2_clear_stall_callback - factored out clear stall callback
*
* Input parameters:
* xfer1: Clear Stall Control Transfer
* xfer2: Stalled USB Transfer
*
* This function is NULL safe.
*
* Return values:
* 0: In progress
* Else: Finished
*
* Clear stall config example:
*
* static const struct usb2_config my_clearstall = {
* .type = UE_CONTROL,
* .endpoint = 0,
* .direction = UE_DIR_ANY,
* .interval = 50, //50 milliseconds
* .bufsize = sizeof(struct usb2_device_request),
* .timeout = 1000, //1.000 seconds
* .callback = &my_clear_stall_callback, // **
* .usb_mode = USB_MODE_HOST,
* };
*
* ** "my_clear_stall_callback" calls "usb2_clear_stall_callback"
* passing the correct parameters.
*------------------------------------------------------------------------*/
uint8_t
usb2_clear_stall_callback(struct usb2_xfer *xfer1,
struct usb2_xfer *xfer2)
{
struct usb2_device_request req;
if (xfer2 == NULL) {
/* looks like we are tearing down */
DPRINTF("NULL input parameter\n");
return (0);
}
USB_XFER_LOCK_ASSERT(xfer1, MA_OWNED);
USB_XFER_LOCK_ASSERT(xfer2, MA_OWNED);
switch (USB_GET_STATE(xfer1)) {
case USB_ST_SETUP:
/*
* pre-clear the data toggle to DATA0 ("umass.c" and
* "ata-usb.c" depends on this)
*/
usb2_clear_data_toggle(xfer2->xroot->udev, xfer2->pipe);
/* setup a clear-stall packet */
req.bmRequestType = UT_WRITE_ENDPOINT;
req.bRequest = UR_CLEAR_FEATURE;
USETW(req.wValue, UF_ENDPOINT_HALT);
req.wIndex[0] = xfer2->pipe->edesc->bEndpointAddress;
req.wIndex[1] = 0;
USETW(req.wLength, 0);
/*
* "usb2_transfer_setup_sub()" will ensure that
* we have sufficient room in the buffer for
* the request structure!
*/
/* copy in the transfer */
usb2_copy_in(xfer1->frbuffers, 0, &req, sizeof(req));
/* set length */
xfer1->frlengths[0] = sizeof(req);
xfer1->nframes = 1;
usb2_start_hardware(xfer1);
return (0);
case USB_ST_TRANSFERRED:
break;
default: /* Error */
if (xfer1->error == USB_ERR_CANCELLED) {
return (0);
}
break;
}
return (1); /* Clear Stall Finished */
}
void
usb2_do_poll(struct usb2_xfer **ppxfer, uint16_t max)
{
static uint8_t once = 0;
/* polling is currently not supported */
if (!once) {
once = 1;
printf("usb2_do_poll: USB polling is "
"not supported!\n");
}
}
static void
usb2_get_std_packet_size(struct usb2_std_packet_size *ptr,
uint8_t type, enum usb_dev_speed speed)
{
static const uint16_t intr_range_max[USB_SPEED_MAX] = {
[USB_SPEED_LOW] = 8,
[USB_SPEED_FULL] = 64,
[USB_SPEED_HIGH] = 1024,
[USB_SPEED_VARIABLE] = 1024,
[USB_SPEED_SUPER] = 1024,
};
static const uint16_t isoc_range_max[USB_SPEED_MAX] = {
[USB_SPEED_LOW] = 0, /* invalid */
[USB_SPEED_FULL] = 1023,
[USB_SPEED_HIGH] = 1024,
[USB_SPEED_VARIABLE] = 3584,
[USB_SPEED_SUPER] = 1024,
};
static const uint16_t control_min[USB_SPEED_MAX] = {
[USB_SPEED_LOW] = 8,
[USB_SPEED_FULL] = 8,
[USB_SPEED_HIGH] = 64,
[USB_SPEED_VARIABLE] = 512,
[USB_SPEED_SUPER] = 512,
};
static const uint16_t bulk_min[USB_SPEED_MAX] = {
[USB_SPEED_LOW] = 0, /* not supported */
[USB_SPEED_FULL] = 8,
[USB_SPEED_HIGH] = 512,
[USB_SPEED_VARIABLE] = 512,
[USB_SPEED_SUPER] = 1024,
};
uint16_t temp;
memset(ptr, 0, sizeof(*ptr));
switch (type) {
case UE_INTERRUPT:
ptr->range.max = intr_range_max[speed];
break;
case UE_ISOCHRONOUS:
ptr->range.max = isoc_range_max[speed];
break;
default:
if (type == UE_BULK)
temp = bulk_min[speed];
else /* UE_CONTROL */
temp = control_min[speed];
/* default is fixed */
ptr->fixed[0] = temp;
ptr->fixed[1] = temp;
ptr->fixed[2] = temp;
ptr->fixed[3] = temp;
if (speed == USB_SPEED_FULL) {
/* multiple sizes */
ptr->fixed[1] = 16;
ptr->fixed[2] = 32;
ptr->fixed[3] = 64;
}
if ((speed == USB_SPEED_VARIABLE) &&
(type == UE_BULK)) {
/* multiple sizes */
ptr->fixed[2] = 1024;
ptr->fixed[3] = 1536;
}
break;
}
}
Reference in New Issue View Git Blame Copy Permalink