freebsd-dev/sys/amd64/isa/icu_vector.S
Bruce Evans eec2e836e9 Go back to the old (icu.s rev.1.7 1993) way of keeping the AST-pending
bit separate from ipending, since this is simpler and/or necessary for
SMP and may even be better for UP.

Reviewed by:	alc, luoqi, tegge
1999-07-10 15:28:01 +00:00

225 lines
6.8 KiB
ArmAsm

/*
* from: vector.s, 386BSD 0.1 unknown origin
* $Id: icu_vector.s,v 1.12 1999/05/28 14:08:59 bde Exp $
*/
/*
* modified for PC98 by Kakefuda
*/
#ifdef PC98
#define ICU_IMR_OFFSET 2 /* IO_ICU{1,2} + 2 */
#else
#define ICU_IMR_OFFSET 1 /* IO_ICU{1,2} + 1 */
#endif
#define ICU_EOI 0x20 /* XXX - define elsewhere */
#define IRQ_BIT(irq_num) (1 << ((irq_num) % 8))
#define IRQ_BYTE(irq_num) ((irq_num) >> 3)
#ifdef AUTO_EOI_1
#define ENABLE_ICU1 /* use auto-EOI to reduce i/o */
#define OUTB_ICU1
#else
#define ENABLE_ICU1 \
movb $ICU_EOI,%al ; /* as soon as possible send EOI ... */ \
OUTB_ICU1 /* ... to clear in service bit */
#define OUTB_ICU1 \
outb %al,$IO_ICU1
#endif
#ifdef AUTO_EOI_2
/*
* The data sheet says no auto-EOI on slave, but it sometimes works.
*/
#define ENABLE_ICU1_AND_2 ENABLE_ICU1
#else
#define ENABLE_ICU1_AND_2 \
movb $ICU_EOI,%al ; /* as above */ \
outb %al,$IO_ICU2 ; /* but do second icu first ... */ \
OUTB_ICU1 /* ... then first icu (if !AUTO_EOI_1) */
#endif
/*
* Macros for interrupt interrupt entry, call to handler, and exit.
*/
#define FAST_INTR(irq_num, vec_name, enable_icus) \
.text ; \
SUPERALIGN_TEXT ; \
IDTVEC(vec_name) ; \
pushl %eax ; /* save only call-used registers */ \
pushl %ecx ; \
pushl %edx ; \
pushl %ds ; \
MAYBE_PUSHL_ES ; \
movl $KDSEL,%eax ; \
movl %ax,%ds ; \
MAYBE_MOVW_AX_ES ; \
FAKE_MCOUNT((4+ACTUALLY_PUSHED)*4(%esp)) ; \
pushl _intr_unit + (irq_num) * 4 ; \
call *_intr_handler + (irq_num) * 4 ; /* do the work ASAP */ \
enable_icus ; /* (re)enable ASAP (helps edge trigger?) */ \
addl $4,%esp ; \
incl _cnt+V_INTR ; /* book-keeping can wait */ \
movl _intr_countp + (irq_num) * 4,%eax ; \
incl (%eax) ; \
movl _cpl,%eax ; /* are we unmasking pending HWIs or SWIs? */ \
notl %eax ; \
andl _ipending,%eax ; \
jne 2f ; /* yes, maybe handle them */ \
1: ; \
MEXITCOUNT ; \
MAYBE_POPL_ES ; \
popl %ds ; \
popl %edx ; \
popl %ecx ; \
popl %eax ; \
iret ; \
; \
ALIGN_TEXT ; \
2: ; \
cmpb $3,_intr_nesting_level ; /* is there enough stack? */ \
jae 1b ; /* no, return */ \
movl _cpl,%eax ; \
/* XXX next line is probably unnecessary now. */ \
movl $HWI_MASK|SWI_MASK,_cpl ; /* limit nesting ... */ \
incb _intr_nesting_level ; /* ... really limit it ... */ \
sti ; /* ... to do this as early as possible */ \
MAYBE_POPL_ES ; /* discard most of thin frame ... */ \
popl %ecx ; /* ... original %ds ... */ \
popl %edx ; \
xchgl %eax,4(%esp) ; /* orig %eax; save cpl */ \
pushal ; /* build fat frame (grrr) ... */ \
pushl %ecx ; /* ... actually %ds ... */ \
pushl %es ; \
pushl %fs ; \
movl $KDSEL,%eax ; \
movl %ax,%es ; \
movl %ax,%fs ; \
movl (3+8+0)*4(%esp),%ecx ; /* ... %ecx from thin frame ... */ \
movl %ecx,(3+6)*4(%esp) ; /* ... to fat frame ... */ \
movl (3+8+1)*4(%esp),%eax ; /* ... cpl from thin frame */ \
pushl %eax ; \
subl $4,%esp ; /* junk for unit number */ \
MEXITCOUNT ; \
jmp _doreti
#define INTR(irq_num, vec_name, icu, enable_icus, reg, maybe_extra_ipending) \
.text ; \
SUPERALIGN_TEXT ; \
IDTVEC(vec_name) ; \
pushl $0 ; /* dummy error code */ \
pushl $0 ; /* dummy trap type */ \
pushal ; \
pushl %ds ; /* save our data and extra segments ... */ \
pushl %es ; \
pushl %fs ; \
movl $KDSEL,%eax ; /* ... and reload with kernel's own ... */ \
movl %ax,%ds ; /* ... early for obsolete reasons */ \
movl %ax,%es ; \
movl %ax,%fs ; \
maybe_extra_ipending ; \
movb _imen + IRQ_BYTE(irq_num),%al ; \
orb $IRQ_BIT(irq_num),%al ; \
movb %al,_imen + IRQ_BYTE(irq_num) ; \
outb %al,$icu+ICU_IMR_OFFSET ; \
enable_icus ; \
movl _cpl,%eax ; \
testb $IRQ_BIT(irq_num),%reg ; \
jne 2f ; \
incb _intr_nesting_level ; \
__CONCAT(Xresume,irq_num): ; \
FAKE_MCOUNT(13*4(%esp)) ; /* XXX late to avoid double count */ \
incl _cnt+V_INTR ; /* tally interrupts */ \
movl _intr_countp + (irq_num) * 4,%eax ; \
incl (%eax) ; \
movl _cpl,%eax ; \
pushl %eax ; \
pushl _intr_unit + (irq_num) * 4 ; \
orl _intr_mask + (irq_num) * 4,%eax ; \
movl %eax,_cpl ; \
sti ; \
call *_intr_handler + (irq_num) * 4 ; \
cli ; /* must unmask _imen and icu atomically */ \
movb _imen + IRQ_BYTE(irq_num),%al ; \
andb $~IRQ_BIT(irq_num),%al ; \
movb %al,_imen + IRQ_BYTE(irq_num) ; \
outb %al,$icu+ICU_IMR_OFFSET ; \
sti ; /* XXX _doreti repeats the cli/sti */ \
MEXITCOUNT ; \
/* We could usually avoid the following jmp by inlining some of */ \
/* _doreti, but it's probably better to use less cache. */ \
jmp _doreti ; \
; \
ALIGN_TEXT ; \
2: ; \
/* XXX skip mcounting here to avoid double count */ \
orb $IRQ_BIT(irq_num),_ipending + IRQ_BYTE(irq_num) ; \
popl %fs ; \
popl %es ; \
popl %ds ; \
popal ; \
addl $4+4,%esp ; \
iret
MCOUNT_LABEL(bintr)
FAST_INTR(0,fastintr0, ENABLE_ICU1)
FAST_INTR(1,fastintr1, ENABLE_ICU1)
FAST_INTR(2,fastintr2, ENABLE_ICU1)
FAST_INTR(3,fastintr3, ENABLE_ICU1)
FAST_INTR(4,fastintr4, ENABLE_ICU1)
FAST_INTR(5,fastintr5, ENABLE_ICU1)
FAST_INTR(6,fastintr6, ENABLE_ICU1)
FAST_INTR(7,fastintr7, ENABLE_ICU1)
FAST_INTR(8,fastintr8, ENABLE_ICU1_AND_2)
FAST_INTR(9,fastintr9, ENABLE_ICU1_AND_2)
FAST_INTR(10,fastintr10, ENABLE_ICU1_AND_2)
FAST_INTR(11,fastintr11, ENABLE_ICU1_AND_2)
FAST_INTR(12,fastintr12, ENABLE_ICU1_AND_2)
FAST_INTR(13,fastintr13, ENABLE_ICU1_AND_2)
FAST_INTR(14,fastintr14, ENABLE_ICU1_AND_2)
FAST_INTR(15,fastintr15, ENABLE_ICU1_AND_2)
#define CLKINTR_PENDING movl $1,CNAME(clkintr_pending)
INTR(0,intr0, IO_ICU1, ENABLE_ICU1, al, CLKINTR_PENDING)
INTR(1,intr1, IO_ICU1, ENABLE_ICU1, al,)
INTR(2,intr2, IO_ICU1, ENABLE_ICU1, al,)
INTR(3,intr3, IO_ICU1, ENABLE_ICU1, al,)
INTR(4,intr4, IO_ICU1, ENABLE_ICU1, al,)
INTR(5,intr5, IO_ICU1, ENABLE_ICU1, al,)
INTR(6,intr6, IO_ICU1, ENABLE_ICU1, al,)
INTR(7,intr7, IO_ICU1, ENABLE_ICU1, al,)
INTR(8,intr8, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
INTR(9,intr9, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
INTR(10,intr10, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
INTR(11,intr11, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
INTR(12,intr12, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
INTR(13,intr13, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
INTR(14,intr14, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
INTR(15,intr15, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
MCOUNT_LABEL(eintr)
.data
.globl _ihandlers
_ihandlers: /* addresses of interrupt handlers */
/* actually resumption addresses for HWI's */
.long Xresume0, Xresume1, Xresume2, Xresume3
.long Xresume4, Xresume5, Xresume6, Xresume7
.long Xresume8, Xresume9, Xresume10, Xresume11
.long Xresume12, Xresume13, Xresume14, Xresume15
.long _swi_null, swi_net, _swi_null, _swi_null
.long _swi_vm, _swi_null, _swi_null, _swi_null
.long _swi_null, _swi_null, _swi_null, _swi_null
.long _swi_null, _swi_null, _softclock, _swi_null
imasks: /* masks for interrupt handlers */
.space NHWI*4 /* padding; HWI masks are elsewhere */
.long SWI_TTY_MASK, SWI_NET_MASK, SWI_CAMNET_MASK, SWI_CAMBIO_MASK
.long SWI_VM_MASK, 0, 0, 0
.long 0, 0, 0, 0
.long 0, 0, SWI_CLOCK_MASK, 0
.text