freebsd-dev/sys/powerpc/include/spr.h
Justin Hibbits 169dd953b0 Add hwpmc(4) support for the PowerPC 970 class processors, direct events.
This also fixes asserts on removal of the module for the mpc74xx.

The PowerPC 970 processors have two different types of events: direct events
and indirect events.  Thus far only direct events are supported.  I included
some documentation in the driver on how indirect events work, but support is
for the future.

MFC after:	1 month
2014-02-01 02:03:50 +00:00

783 lines
39 KiB
C

/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* $NetBSD: spr.h,v 1.25 2002/08/14 15:38:40 matt Exp $
* $FreeBSD$
*/
#ifndef _POWERPC_SPR_H_
#define _POWERPC_SPR_H_
#ifndef _LOCORE
#define mtspr(reg, val) \
__asm __volatile("mtspr %0,%1" : : "K"(reg), "r"(val))
#define mfspr(reg) \
( { register_t val; \
__asm __volatile("mfspr %0,%1" : "=r"(val) : "K"(reg)); \
val; } )
#ifndef __powerpc64__
/* The following routines allow manipulation of the full 64-bit width
* of SPRs on 64 bit CPUs in bridge mode */
#define mtspr64(reg,valhi,vallo,scratch) \
__asm __volatile(" \
mfmsr %0; \
insrdi %0,%5,1,0; \
mtmsrd %0; \
isync; \
\
sld %1,%1,%4; \
or %1,%1,%2; \
mtspr %3,%1; \
srd %1,%1,%4; \
\
clrldi %0,%0,1; \
mtmsrd %0; \
isync;" \
: "=r"(scratch), "=r"(valhi) : "r"(vallo), "K"(reg), "r"(32), "r"(1))
#define mfspr64upper(reg,scratch) \
( { register_t val; \
__asm __volatile(" \
mfmsr %0; \
insrdi %0,%4,1,0; \
mtmsrd %0; \
isync; \
\
mfspr %1,%2; \
srd %1,%1,%3; \
\
clrldi %0,%0,1; \
mtmsrd %0; \
isync;" \
: "=r"(scratch), "=r"(val) : "K"(reg), "r"(32), "r"(1)); \
val; } )
#endif
#endif /* _LOCORE */
/*
* Special Purpose Register declarations.
*
* The first column in the comments indicates which PowerPC
* architectures the SPR is valid on - 4 for 4xx series,
* 6 for 6xx/7xx series and 8 for 8xx and 8xxx series.
*/
#define SPR_MQ 0x000 /* .6. 601 MQ register */
#define SPR_XER 0x001 /* 468 Fixed Point Exception Register */
#define SPR_RTCU_R 0x004 /* .6. 601 RTC Upper - Read */
#define SPR_RTCL_R 0x005 /* .6. 601 RTC Lower - Read */
#define SPR_LR 0x008 /* 468 Link Register */
#define SPR_CTR 0x009 /* 468 Count Register */
#define SPR_DSISR 0x012 /* .68 DSI exception source */
#define DSISR_DIRECT 0x80000000 /* Direct-store error exception */
#define DSISR_NOTFOUND 0x40000000 /* Translation not found */
#define DSISR_PROTECT 0x08000000 /* Memory access not permitted */
#define DSISR_INVRX 0x04000000 /* Reserve-indexed insn direct-store access */
#define DSISR_STORE 0x02000000 /* Store operation */
#define DSISR_DABR 0x00400000 /* DABR match */
#define DSISR_SEGMENT 0x00200000 /* XXX; not in 6xx PEM */
#define DSISR_EAR 0x00100000 /* eciwx/ecowx && EAR[E] == 0 */
#define SPR_DAR 0x013 /* .68 Data Address Register */
#define SPR_RTCU_W 0x014 /* .6. 601 RTC Upper - Write */
#define SPR_RTCL_W 0x015 /* .6. 601 RTC Lower - Write */
#define SPR_DEC 0x016 /* .68 DECrementer register */
#define SPR_SDR1 0x019 /* .68 Page table base address register */
#define SPR_SRR0 0x01a /* 468 Save/Restore Register 0 */
#define SPR_SRR1 0x01b /* 468 Save/Restore Register 1 */
#define SRR1_ISI_PFAULT 0x40000000 /* ISI page not found */
#define SRR1_ISI_NOEXECUTE 0x10000000 /* Memory marked no-execute */
#define SRR1_ISI_PP 0x08000000 /* PP bits forbid access */
#define SPR_DECAR 0x036 /* ..8 Decrementer auto reload */
#define SPR_EIE 0x050 /* ..8 Exception Interrupt ??? */
#define SPR_EID 0x051 /* ..8 Exception Interrupt ??? */
#define SPR_NRI 0x052 /* ..8 Exception Interrupt ??? */
#define SPR_USPRG0 0x100 /* 4.. User SPR General 0 */
#define SPR_VRSAVE 0x100 /* .6. AltiVec VRSAVE */
#define SPR_SPRG0 0x110 /* 468 SPR General 0 */
#define SPR_SPRG1 0x111 /* 468 SPR General 1 */
#define SPR_SPRG2 0x112 /* 468 SPR General 2 */
#define SPR_SPRG3 0x113 /* 468 SPR General 3 */
#define SPR_SPRG4 0x114 /* 4.. SPR General 4 */
#define SPR_SPRG5 0x115 /* 4.. SPR General 5 */
#define SPR_SPRG6 0x116 /* 4.. SPR General 6 */
#define SPR_SPRG7 0x117 /* 4.. SPR General 7 */
#define SPR_SCOMC 0x114 /* ... SCOM Address Register (970) */
#define SPR_SCOMD 0x115 /* ... SCOM Data Register (970) */
#define SPR_ASR 0x118 /* ... Address Space Register (PPC64) */
#define SPR_EAR 0x11a /* .68 External Access Register */
#define SPR_PVR 0x11f /* 468 Processor Version Register */
#define MPC601 0x0001
#define MPC603 0x0003
#define MPC604 0x0004
#define MPC602 0x0005
#define MPC603e 0x0006
#define MPC603ev 0x0007
#define MPC750 0x0008
#define MPC750CL 0x7000 /* Nintendo Wii's Broadway */
#define MPC604ev 0x0009
#define MPC7400 0x000c
#define MPC620 0x0014
#define IBM403 0x0020
#define IBM401A1 0x0021
#define IBM401B2 0x0022
#define IBM401C2 0x0023
#define IBM401D2 0x0024
#define IBM401E2 0x0025
#define IBM401F2 0x0026
#define IBM401G2 0x0027
#define IBMRS64II 0x0033
#define IBMRS64III 0x0034
#define IBMPOWER4 0x0035
#define IBMRS64III_2 0x0036
#define IBMRS64IV 0x0037
#define IBMPOWER4PLUS 0x0038
#define IBM970 0x0039
#define IBMPOWER5 0x003a
#define IBMPOWER5PLUS 0x003b
#define IBM970FX 0x003c
#define IBMPOWER6 0x003e
#define IBMPOWER7 0x003f
#define IBMPOWER3 0x0040
#define IBMPOWER3PLUS 0x0041
#define IBM970MP 0x0044
#define IBM970GX 0x0045
#define IBMPOWER7PLUS 0x004a
#define IBMPOWER8 0x004b
#define MPC860 0x0050
#define IBMCELLBE 0x0070
#define MPC8240 0x0081
#define PA6T 0x0090
#define IBM405GP 0x4011
#define IBM405L 0x4161
#define IBM750FX 0x7000
#define MPC745X_P(v) ((v & 0xFFF8) == 0x8000)
#define MPC7450 0x8000
#define MPC7455 0x8001
#define MPC7457 0x8002
#define MPC7447A 0x8003
#define MPC7448 0x8004
#define MPC7410 0x800c
#define MPC8245 0x8081
#define FSL_E500v1 0x8020
#define FSL_E500v2 0x8021
#define FSL_E500mc 0x8023
#define FSL_E5500 0x8024
#define SPR_IBAT0U 0x210 /* .68 Instruction BAT Reg 0 Upper */
#define SPR_IBAT0U 0x210 /* .6. Instruction BAT Reg 0 Upper */
#define SPR_IBAT0L 0x211 /* .6. Instruction BAT Reg 0 Lower */
#define SPR_IBAT1U 0x212 /* .6. Instruction BAT Reg 1 Upper */
#define SPR_IBAT1L 0x213 /* .6. Instruction BAT Reg 1 Lower */
#define SPR_IBAT2U 0x214 /* .6. Instruction BAT Reg 2 Upper */
#define SPR_IBAT2L 0x215 /* .6. Instruction BAT Reg 2 Lower */
#define SPR_IBAT3U 0x216 /* .6. Instruction BAT Reg 3 Upper */
#define SPR_IBAT3L 0x217 /* .6. Instruction BAT Reg 3 Lower */
#define SPR_DBAT0U 0x218 /* .6. Data BAT Reg 0 Upper */
#define SPR_DBAT0L 0x219 /* .6. Data BAT Reg 0 Lower */
#define SPR_DBAT1U 0x21a /* .6. Data BAT Reg 1 Upper */
#define SPR_DBAT1L 0x21b /* .6. Data BAT Reg 1 Lower */
#define SPR_DBAT2U 0x21c /* .6. Data BAT Reg 2 Upper */
#define SPR_DBAT2L 0x21d /* .6. Data BAT Reg 2 Lower */
#define SPR_DBAT3U 0x21e /* .6. Data BAT Reg 3 Upper */
#define SPR_DBAT3L 0x21f /* .6. Data BAT Reg 3 Lower */
#define SPR_IC_CST 0x230 /* ..8 Instruction Cache CSR */
#define IC_CST_IEN 0x80000000 /* I cache is ENabled (RO) */
#define IC_CST_CMD_INVALL 0x0c000000 /* I cache invalidate all */
#define IC_CST_CMD_UNLOCKALL 0x0a000000 /* I cache unlock all */
#define IC_CST_CMD_UNLOCK 0x08000000 /* I cache unlock block */
#define IC_CST_CMD_LOADLOCK 0x06000000 /* I cache load & lock block */
#define IC_CST_CMD_DISABLE 0x04000000 /* I cache disable */
#define IC_CST_CMD_ENABLE 0x02000000 /* I cache enable */
#define IC_CST_CCER1 0x00200000 /* I cache error type 1 (RO) */
#define IC_CST_CCER2 0x00100000 /* I cache error type 2 (RO) */
#define IC_CST_CCER3 0x00080000 /* I cache error type 3 (RO) */
#define SPR_IBAT4U 0x230 /* .6. Instruction BAT Reg 4 Upper */
#define SPR_IC_ADR 0x231 /* ..8 Instruction Cache Address */
#define SPR_IBAT4L 0x231 /* .6. Instruction BAT Reg 4 Lower */
#define SPR_IC_DAT 0x232 /* ..8 Instruction Cache Data */
#define SPR_IBAT5U 0x232 /* .6. Instruction BAT Reg 5 Upper */
#define SPR_IBAT5L 0x233 /* .6. Instruction BAT Reg 5 Lower */
#define SPR_IBAT6U 0x234 /* .6. Instruction BAT Reg 6 Upper */
#define SPR_IBAT6L 0x235 /* .6. Instruction BAT Reg 6 Lower */
#define SPR_IBAT7U 0x236 /* .6. Instruction BAT Reg 7 Upper */
#define SPR_IBAT7L 0x237 /* .6. Instruction BAT Reg 7 Lower */
#define SPR_DC_CST 0x230 /* ..8 Data Cache CSR */
#define DC_CST_DEN 0x80000000 /* D cache ENabled (RO) */
#define DC_CST_DFWT 0x40000000 /* D cache Force Write-Thru (RO) */
#define DC_CST_LES 0x20000000 /* D cache Little Endian Swap (RO) */
#define DC_CST_CMD_FLUSH 0x0e000000 /* D cache invalidate all */
#define DC_CST_CMD_INVALL 0x0c000000 /* D cache invalidate all */
#define DC_CST_CMD_UNLOCKALL 0x0a000000 /* D cache unlock all */
#define DC_CST_CMD_UNLOCK 0x08000000 /* D cache unlock block */
#define DC_CST_CMD_CLRLESWAP 0x07000000 /* D cache clr little-endian swap */
#define DC_CST_CMD_LOADLOCK 0x06000000 /* D cache load & lock block */
#define DC_CST_CMD_SETLESWAP 0x05000000 /* D cache set little-endian swap */
#define DC_CST_CMD_DISABLE 0x04000000 /* D cache disable */
#define DC_CST_CMD_CLRFWT 0x03000000 /* D cache clear forced write-thru */
#define DC_CST_CMD_ENABLE 0x02000000 /* D cache enable */
#define DC_CST_CMD_SETFWT 0x01000000 /* D cache set forced write-thru */
#define DC_CST_CCER1 0x00200000 /* D cache error type 1 (RO) */
#define DC_CST_CCER2 0x00100000 /* D cache error type 2 (RO) */
#define DC_CST_CCER3 0x00080000 /* D cache error type 3 (RO) */
#define SPR_DBAT4U 0x238 /* .6. Data BAT Reg 4 Upper */
#define SPR_DC_ADR 0x231 /* ..8 Data Cache Address */
#define SPR_DBAT4L 0x239 /* .6. Data BAT Reg 4 Lower */
#define SPR_DC_DAT 0x232 /* ..8 Data Cache Data */
#define SPR_DBAT5U 0x23a /* .6. Data BAT Reg 5 Upper */
#define SPR_DBAT5L 0x23b /* .6. Data BAT Reg 5 Lower */
#define SPR_DBAT6U 0x23c /* .6. Data BAT Reg 6 Upper */
#define SPR_DBAT6L 0x23d /* .6. Data BAT Reg 6 Lower */
#define SPR_DBAT7U 0x23e /* .6. Data BAT Reg 7 Upper */
#define SPR_DBAT7L 0x23f /* .6. Data BAT Reg 7 Lower */
#define SPR_MI_CTR 0x310 /* ..8 IMMU control */
#define Mx_CTR_GPM 0x80000000 /* Group Protection Mode */
#define Mx_CTR_PPM 0x40000000 /* Page Protection Mode */
#define Mx_CTR_CIDEF 0x20000000 /* Cache-Inhibit DEFault */
#define MD_CTR_WTDEF 0x20000000 /* Write-Through DEFault */
#define Mx_CTR_RSV4 0x08000000 /* Reserve 4 TLB entries */
#define MD_CTR_TWAM 0x04000000 /* TableWalk Assist Mode */
#define Mx_CTR_PPCS 0x02000000 /* Priv/user state compare mode */
#define Mx_CTR_TLB_INDX 0x000001f0 /* TLB index mask */
#define Mx_CTR_TLB_INDX_BITPOS 8 /* TLB index shift */
#define SPR_MI_AP 0x312 /* ..8 IMMU access protection */
#define Mx_GP_SUPER(n) (0 << (2*(15-(n)))) /* access is supervisor */
#define Mx_GP_PAGE (1 << (2*(15-(n)))) /* access is page protect */
#define Mx_GP_SWAPPED (2 << (2*(15-(n)))) /* access is swapped */
#define Mx_GP_USER (3 << (2*(15-(n)))) /* access is user */
#define SPR_MI_EPN 0x313 /* ..8 IMMU effective number */
#define Mx_EPN_EPN 0xfffff000 /* Effective Page Number mask */
#define Mx_EPN_EV 0x00000020 /* Entry Valid */
#define Mx_EPN_ASID 0x0000000f /* Address Space ID */
#define SPR_MI_TWC 0x315 /* ..8 IMMU tablewalk control */
#define MD_TWC_L2TB 0xfffff000 /* Level-2 Tablewalk Base */
#define Mx_TWC_APG 0x000001e0 /* Access Protection Group */
#define Mx_TWC_G 0x00000010 /* Guarded memory */
#define Mx_TWC_PS 0x0000000c /* Page Size (L1) */
#define MD_TWC_WT 0x00000002 /* Write-Through */
#define Mx_TWC_V 0x00000001 /* Entry Valid */
#define SPR_MI_RPN 0x316 /* ..8 IMMU real (phys) page number */
#define Mx_RPN_RPN 0xfffff000 /* Real Page Number */
#define Mx_RPN_PP 0x00000ff0 /* Page Protection */
#define Mx_RPN_SPS 0x00000008 /* Small Page Size */
#define Mx_RPN_SH 0x00000004 /* SHared page */
#define Mx_RPN_CI 0x00000002 /* Cache Inhibit */
#define Mx_RPN_V 0x00000001 /* Valid */
#define SPR_MD_CTR 0x318 /* ..8 DMMU control */
#define SPR_M_CASID 0x319 /* ..8 CASID */
#define M_CASID 0x0000000f /* Current AS Id */
#define SPR_MD_AP 0x31a /* ..8 DMMU access protection */
#define SPR_MD_EPN 0x31b /* ..8 DMMU effective number */
#define SPR_970MMCR0 0x31b /* ... Monitor Mode Control Register 0 (PPC 970) */
#define SPR_970MMCR0_PMC1SEL(x) ((x) << 8) /* PMC1 selector (970) */
#define SPR_970MMCR0_PMC2SEL(x) ((x) << 1) /* PMC2 selector (970) */
#define SPR_970MMCR1 0x31e /* ... Monitor Mode Control Register 1 (PPC 970) */
#define SPR_970MMCR1_PMC3SEL(x) (((x) & 0x1f) << 27) /* PMC 3 selector */
#define SPR_970MMCR1_PMC4SEL(x) (((x) & 0x1f) << 22) /* PMC 4 selector */
#define SPR_970MMCR1_PMC5SEL(x) (((x) & 0x1f) << 17) /* PMC 5 selector */
#define SPR_970MMCR1_PMC6SEL(x) (((x) & 0x1f) << 12) /* PMC 6 selector */
#define SPR_970MMCR1_PMC7SEL(x) (((x) & 0x1f) << 7) /* PMC 7 selector */
#define SPR_970MMCR1_PMC8SEL(x) (((x) & 0x1f) << 2) /* PMC 8 selector */
#define SPR_970MMCRA 0x312 /* ... Monitor Mode Control Register 2 (PPC 970) */
#define SPR_970PMC1 0x313 /* ... PMC 1 */
#define SPR_970PMC2 0x314 /* ... PMC 2 */
#define SPR_970PMC3 0x315 /* ... PMC 3 */
#define SPR_970PMC4 0x316 /* ... PMC 4 */
#define SPR_970PMC5 0x317 /* ... PMC 5 */
#define SPR_970PMC6 0x318 /* ... PMC 6 */
#define SPR_970PMC7 0x319 /* ... PMC 7 */
#define SPR_970PMC8 0x31a /* ... PMC 8 */
#define SPR_M_TWB 0x31c /* ..8 MMU tablewalk base */
#define M_TWB_L1TB 0xfffff000 /* level-1 translation base */
#define M_TWB_L1INDX 0x00000ffc /* level-1 index */
#define SPR_MD_TWC 0x31d /* ..8 DMMU tablewalk control */
#define SPR_MD_RPN 0x31e /* ..8 DMMU real (phys) page number */
#define SPR_MD_TW 0x31f /* ..8 MMU tablewalk scratch */
#define SPR_MI_CAM 0x330 /* ..8 IMMU CAM entry read */
#define SPR_MI_RAM0 0x331 /* ..8 IMMU RAM entry read reg 0 */
#define SPR_MI_RAM1 0x332 /* ..8 IMMU RAM entry read reg 1 */
#define SPR_MD_CAM 0x338 /* ..8 IMMU CAM entry read */
#define SPR_MD_RAM0 0x339 /* ..8 IMMU RAM entry read reg 0 */
#define SPR_MD_RAM1 0x33a /* ..8 IMMU RAM entry read reg 1 */
#define SPR_UMMCR2 0x3a0 /* .6. User Monitor Mode Control Register 2 */
#define SPR_UMMCR0 0x3a8 /* .6. User Monitor Mode Control Register 0 */
#define SPR_USIA 0x3ab /* .6. User Sampled Instruction Address */
#define SPR_UMMCR1 0x3ac /* .6. User Monitor Mode Control Register 1 */
#define SPR_ZPR 0x3b0 /* 4.. Zone Protection Register */
#define SPR_MMCR2 0x3b0 /* .6. Monitor Mode Control Register 2 */
#define SPR_MMCR2_THRESHMULT_32 0x80000000 /* Multiply MMCR0 threshold by 32 */
#define SPR_MMCR2_THRESHMULT_2 0x00000000 /* Multiply MMCR0 threshold by 2 */
#define SPR_PID 0x3b1 /* 4.. Process ID */
#define SPR_PMC5 0x3b1 /* .6. Performance Counter Register 5 */
#define SPR_PMC6 0x3b2 /* .6. Performance Counter Register 6 */
#define SPR_CCR0 0x3b3 /* 4.. Core Configuration Register 0 */
#define SPR_IAC3 0x3b4 /* 4.. Instruction Address Compare 3 */
#define SPR_IAC4 0x3b5 /* 4.. Instruction Address Compare 4 */
#define SPR_DVC1 0x3b6 /* 4.. Data Value Compare 1 */
#define SPR_DVC2 0x3b7 /* 4.. Data Value Compare 2 */
#define SPR_MMCR0 0x3b8 /* .6. Monitor Mode Control Register 0 */
#define SPR_MMCR0_FC 0x80000000 /* Freeze counters */
#define SPR_MMCR0_FCS 0x40000000 /* Freeze counters in supervisor mode */
#define SPR_MMCR0_FCP 0x20000000 /* Freeze counters in user mode */
#define SPR_MMCR0_FCM1 0x10000000 /* Freeze counters when mark=1 */
#define SPR_MMCR0_FCM0 0x08000000 /* Freeze counters when mark=0 */
#define SPR_MMCR0_PMXE 0x04000000 /* Enable PM interrupt */
#define SPR_MMCR0_FCECE 0x02000000 /* Freeze counters after event */
#define SPR_MMCR0_TBSEL_15 0x01800000 /* Count bit 15 of TBL */
#define SPR_MMCR0_TBSEL_19 0x01000000 /* Count bit 19 of TBL */
#define SPR_MMCR0_TBSEL_23 0x00800000 /* Count bit 23 of TBL */
#define SPR_MMCR0_TBSEL_31 0x00000000 /* Count bit 31 of TBL */
#define SPR_MMCR0_TBEE 0x00400000 /* Time-base event enable */
#define SPR_MMCRO_THRESHOLD(x) ((x) << 16) /* Threshold value */
#define SPR_MMCR0_PMC1CE 0x00008000 /* PMC1 condition enable */
#define SPR_MMCR0_PMCNCE 0x00004000 /* PMCn condition enable */
#define SPR_MMCR0_TRIGGER 0x00002000 /* Trigger */
#define SPR_MMCR0_PMC1SEL(x) (((x) & 0x3f) << 6) /* PMC1 selector */
#define SPR_MMCR0_PMC2SEL(x) (((x) & 0x3f) << 0) /* PMC2 selector */
#define SPR_SGR 0x3b9 /* 4.. Storage Guarded Register */
#define SPR_PMC1 0x3b9 /* .6. Performance Counter Register 1 */
#define SPR_DCWR 0x3ba /* 4.. Data Cache Write-through Register */
#define SPR_PMC2 0x3ba /* .6. Performance Counter Register 2 */
#define SPR_SLER 0x3bb /* 4.. Storage Little Endian Register */
#define SPR_SIA 0x3bb /* .6. Sampled Instruction Address */
#define SPR_MMCR1 0x3bc /* .6. Monitor Mode Control Register 2 */
#define SPR_MMCR1_PMC3SEL(x) (((x) & 0x1f) << 27) /* PMC 3 selector */
#define SPR_MMCR1_PMC4SEL(x) (((x) & 0x1f) << 22) /* PMC 4 selector */
#define SPR_MMCR1_PMC5SEL(x) (((x) & 0x1f) << 17) /* PMC 5 selector */
#define SPR_MMCR1_PMC6SEL(x) (((x) & 0x3f) << 11) /* PMC 6 selector */
#define SPR_SU0R 0x3bc /* 4.. Storage User-defined 0 Register */
#define SPR_PMC3 0x3bd /* .6. Performance Counter Register 3 */
#define SPR_PMC4 0x3be /* .6. Performance Counter Register 4 */
#define SPR_DMISS 0x3d0 /* .68 Data TLB Miss Address Register */
#define SPR_DCMP 0x3d1 /* .68 Data TLB Compare Register */
#define SPR_HASH1 0x3d2 /* .68 Primary Hash Address Register */
#define SPR_ICDBDR 0x3d3 /* 4.. Instruction Cache Debug Data Register */
#define SPR_HASH2 0x3d3 /* .68 Secondary Hash Address Register */
#define SPR_IMISS 0x3d4 /* .68 Instruction TLB Miss Address Register */
#define SPR_TLBMISS 0x3d4 /* .6. TLB Miss Address Register */
#define SPR_DEAR 0x3d5 /* 4.. Data Error Address Register */
#define SPR_ICMP 0x3d5 /* .68 Instruction TLB Compare Register */
#define SPR_PTEHI 0x3d5 /* .6. Instruction TLB Compare Register */
#define SPR_EVPR 0x3d6 /* 4.. Exception Vector Prefix Register */
#define SPR_RPA 0x3d6 /* .68 Required Physical Address Register */
#define SPR_PTELO 0x3d6 /* .6. Required Physical Address Register */
#define SPR_TSR 0x150 /* ..8 Timer Status Register */
#define SPR_TCR 0x154 /* ..8 Timer Control Register */
#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
#define TSR_WIS 0x40000000 /* Watchdog Interrupt Status */
#define TSR_WRS_MASK 0x30000000 /* Watchdog Reset Status */
#define TSR_WRS_NONE 0x00000000 /* No watchdog reset has occurred */
#define TSR_WRS_CORE 0x10000000 /* Core reset was forced by the watchdog */
#define TSR_WRS_CHIP 0x20000000 /* Chip reset was forced by the watchdog */
#define TSR_WRS_SYSTEM 0x30000000 /* System reset was forced by the watchdog */
#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
#define TSR_DIS 0x08000000 /* Decrementer Interrupt Status */
#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
#define TCR_WP_MASK 0xc0000000 /* Watchdog Period mask */
#define TCR_WP_2_17 0x00000000 /* 2**17 clocks */
#define TCR_WP_2_21 0x40000000 /* 2**21 clocks */
#define TCR_WP_2_25 0x80000000 /* 2**25 clocks */
#define TCR_WP_2_29 0xc0000000 /* 2**29 clocks */
#define TCR_WRC_MASK 0x30000000 /* Watchdog Reset Control mask */
#define TCR_WRC_NONE 0x00000000 /* No watchdog reset */
#define TCR_WRC_CORE 0x10000000 /* Core reset */
#define TCR_WRC_CHIP 0x20000000 /* Chip reset */
#define TCR_WRC_SYSTEM 0x30000000 /* System reset */
#define TCR_WIE 0x08000000 /* Watchdog Interrupt Enable */
#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
#define TCR_DIE 0x04000000 /* Pecrementer Interrupt Enable */
#define TCR_FP_MASK 0x03000000 /* FIT Period */
#define TCR_FP_2_9 0x00000000 /* 2**9 clocks */
#define TCR_FP_2_13 0x01000000 /* 2**13 clocks */
#define TCR_FP_2_17 0x02000000 /* 2**17 clocks */
#define TCR_FP_2_21 0x03000000 /* 2**21 clocks */
#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
#define TCR_ARE 0x00400000 /* Auto Reload Enable */
#define SPR_PIT 0x3db /* 4.. Programmable Interval Timer */
#define SPR_SRR2 0x3de /* 4.. Save/Restore Register 2 */
#define SPR_SRR3 0x3df /* 4.. Save/Restore Register 3 */
#define SPR_HID0 0x3f0 /* ..8 Hardware Implementation Register 0 */
#define SPR_HID1 0x3f1 /* ..8 Hardware Implementation Register 1 */
#define SPR_HID2 0x3f3 /* ..8 Hardware Implementation Register 2 */
#define SPR_HID4 0x3f4 /* ..8 Hardware Implementation Register 4 */
#define SPR_HID5 0x3f6 /* ..8 Hardware Implementation Register 5 */
#define SPR_HID6 0x3f9 /* ..8 Hardware Implementation Register 6 */
#define SPR_CELL_TSRL 0x380 /* ... Cell BE Thread Status Register */
#define SPR_CELL_TSCR 0x399 /* ... Cell BE Thread Switch Register */
#if defined(AIM)
#define SPR_DBSR 0x3f0 /* 4.. Debug Status Register */
#define DBSR_IC 0x80000000 /* Instruction completion debug event */
#define DBSR_BT 0x40000000 /* Branch Taken debug event */
#define DBSR_EDE 0x20000000 /* Exception debug event */
#define DBSR_TIE 0x10000000 /* Trap Instruction debug event */
#define DBSR_UDE 0x08000000 /* Unconditional debug event */
#define DBSR_IA1 0x04000000 /* IAC1 debug event */
#define DBSR_IA2 0x02000000 /* IAC2 debug event */
#define DBSR_DR1 0x01000000 /* DAC1 Read debug event */
#define DBSR_DW1 0x00800000 /* DAC1 Write debug event */
#define DBSR_DR2 0x00400000 /* DAC2 Read debug event */
#define DBSR_DW2 0x00200000 /* DAC2 Write debug event */
#define DBSR_IDE 0x00100000 /* Imprecise debug event */
#define DBSR_IA3 0x00080000 /* IAC3 debug event */
#define DBSR_IA4 0x00040000 /* IAC4 debug event */
#define DBSR_MRR 0x00000300 /* Most recent reset */
#define SPR_DBCR0 0x3f2 /* 4.. Debug Control Register 0 */
#define SPR_DBCR1 0x3bd /* 4.. Debug Control Register 1 */
#define SPR_IAC1 0x3f4 /* 4.. Instruction Address Compare 1 */
#define SPR_IAC2 0x3f5 /* 4.. Instruction Address Compare 2 */
#define SPR_DAC1 0x3f6 /* 4.. Data Address Compare 1 */
#define SPR_DAC2 0x3f7 /* 4.. Data Address Compare 2 */
#define SPR_PIR 0x3ff /* .6. Processor Identification Register */
#elif defined(BOOKE)
#define SPR_PIR 0x11e /* ..8 Processor Identification Register */
#define SPR_DBSR 0x130 /* ..8 Debug Status Register */
#define DBSR_IDE 0x80000000 /* Imprecise debug event. */
#define DBSR_UDE 0x40000000 /* Unconditional debug event. */
#define DBSR_MRR 0x30000000 /* Most recent Reset (mask). */
#define DBSR_ICMP 0x08000000 /* Instr. complete debug event. */
#define DBSR_BRT 0x04000000 /* Branch taken debug event. */
#define DBSR_IRPT 0x02000000 /* Interrupt taken debug event. */
#define DBSR_TRAP 0x01000000 /* Trap instr. debug event. */
#define DBSR_IAC1 0x00800000 /* Instr. address compare #1. */
#define DBSR_IAC2 0x00400000 /* Instr. address compare #2. */
#define DBSR_IAC3 0x00200000 /* Instr. address compare #3. */
#define DBSR_IAC4 0x00100000 /* Instr. address compare #4. */
#define DBSR_DAC1R 0x00080000 /* Data addr. read compare #1. */
#define DBSR_DAC1W 0x00040000 /* Data addr. write compare #1. */
#define DBSR_DAC2R 0x00020000 /* Data addr. read compare #2. */
#define DBSR_DAC2W 0x00010000 /* Data addr. write compare #2. */
#define DBSR_RET 0x00008000 /* Return debug event. */
#define SPR_DBCR0 0x134 /* ..8 Debug Control Register 0 */
#define SPR_DBCR1 0x135 /* ..8 Debug Control Register 1 */
#define SPR_IAC1 0x138 /* ..8 Instruction Address Compare 1 */
#define SPR_IAC2 0x139 /* ..8 Instruction Address Compare 2 */
#define SPR_DAC1 0x13c /* ..8 Data Address Compare 1 */
#define SPR_DAC2 0x13d /* ..8 Data Address Compare 2 */
#endif
#define DBCR0_EDM 0x80000000 /* External Debug Mode */
#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
#define DBCR0_RST_MASK 0x30000000 /* ReSeT */
#define DBCR0_RST_NONE 0x00000000 /* No action */
#define DBCR0_RST_CORE 0x10000000 /* Core reset */
#define DBCR0_RST_CHIP 0x20000000 /* Chip reset */
#define DBCR0_RST_SYSTEM 0x30000000 /* System reset */
#define DBCR0_IC 0x08000000 /* Instruction Completion debug event */
#define DBCR0_BT 0x04000000 /* Branch Taken debug event */
#define DBCR0_EDE 0x02000000 /* Exception Debug Event */
#define DBCR0_TDE 0x01000000 /* Trap Debug Event */
#define DBCR0_IA1 0x00800000 /* IAC (Instruction Address Compare) 1 debug event */
#define DBCR0_IA2 0x00400000 /* IAC 2 debug event */
#define DBCR0_IA12 0x00200000 /* Instruction Address Range Compare 1-2 */
#define DBCR0_IA12X 0x00100000 /* IA12 eXclusive */
#define DBCR0_IA3 0x00080000 /* IAC 3 debug event */
#define DBCR0_IA4 0x00040000 /* IAC 4 debug event */
#define DBCR0_IA34 0x00020000 /* Instruction Address Range Compare 3-4 */
#define DBCR0_IA34X 0x00010000 /* IA34 eXclusive */
#define DBCR0_IA12T 0x00008000 /* Instruction Address Range Compare 1-2 range Toggle */
#define DBCR0_IA34T 0x00004000 /* Instruction Address Range Compare 3-4 range Toggle */
#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
#define SPR_IABR 0x3f2 /* ..8 Instruction Address Breakpoint Register 0 */
#define SPR_DABR 0x3f5 /* .6. Data Address Breakpoint Register */
#define SPR_MSSCR0 0x3f6 /* .6. Memory SubSystem Control Register */
#define MSSCR0_SHDEN 0x80000000 /* 0: Shared-state enable */
#define MSSCR0_SHDPEN3 0x40000000 /* 1: ~SHD[01] signal enable in MEI mode */
#define MSSCR0_L1INTVEN 0x38000000 /* 2-4: L1 data cache ~HIT intervention enable */
#define MSSCR0_L2INTVEN 0x07000000 /* 5-7: L2 data cache ~HIT intervention enable*/
#define MSSCR0_DL1HWF 0x00800000 /* 8: L1 data cache hardware flush */
#define MSSCR0_MBO 0x00400000 /* 9: must be one */
#define MSSCR0_EMODE 0x00200000 /* 10: MPX bus mode (read-only) */
#define MSSCR0_ABD 0x00100000 /* 11: address bus driven (read-only) */
#define MSSCR0_MBZ 0x000fffff /* 12-31: must be zero */
#define MSSCR0_L2PFE 0x00000003 /* 30-31: L2 prefetch enable */
#define SPR_LDSTCR 0x3f8 /* .6. Load/Store Control Register */
#define SPR_L2PM 0x3f8 /* .6. L2 Private Memory Control Register */
#define SPR_L2CR 0x3f9 /* .6. L2 Control Register */
#define L2CR_L2E 0x80000000 /* 0: L2 enable */
#define L2CR_L2PE 0x40000000 /* 1: L2 data parity enable */
#define L2CR_L2SIZ 0x30000000 /* 2-3: L2 size */
#define L2SIZ_2M 0x00000000
#define L2SIZ_256K 0x10000000
#define L2SIZ_512K 0x20000000
#define L2SIZ_1M 0x30000000
#define L2CR_L2CLK 0x0e000000 /* 4-6: L2 clock ratio */
#define L2CLK_DIS 0x00000000 /* disable L2 clock */
#define L2CLK_10 0x02000000 /* core clock / 1 */
#define L2CLK_15 0x04000000 /* / 1.5 */
#define L2CLK_20 0x08000000 /* / 2 */
#define L2CLK_25 0x0a000000 /* / 2.5 */
#define L2CLK_30 0x0c000000 /* / 3 */
#define L2CR_L2RAM 0x01800000 /* 7-8: L2 RAM type */
#define L2RAM_FLOWTHRU_BURST 0x00000000
#define L2RAM_PIPELINE_BURST 0x01000000
#define L2RAM_PIPELINE_LATE 0x01800000
#define L2CR_L2DO 0x00400000 /* 9: L2 data-only.
Setting this bit disables instruction
caching. */
#define L2CR_L2I 0x00200000 /* 10: L2 global invalidate. */
#define L2CR_L2IO_7450 0x00010000 /* 11: L2 instruction-only (MPC745x). */
#define L2CR_L2CTL 0x00100000 /* 11: L2 RAM control (ZZ enable).
Enables automatic operation of the
L2ZZ (low-power mode) signal. */
#define L2CR_L2WT 0x00080000 /* 12: L2 write-through. */
#define L2CR_L2TS 0x00040000 /* 13: L2 test support. */
#define L2CR_L2OH 0x00030000 /* 14-15: L2 output hold. */
#define L2CR_L2DO_7450 0x00010000 /* 15: L2 data-only (MPC745x). */
#define L2CR_L2SL 0x00008000 /* 16: L2 DLL slow. */
#define L2CR_L2DF 0x00004000 /* 17: L2 differential clock. */
#define L2CR_L2BYP 0x00002000 /* 18: L2 DLL bypass. */
#define L2CR_L2FA 0x00001000 /* 19: L2 flush assist (for software flush). */
#define L2CR_L2HWF 0x00000800 /* 20: L2 hardware flush. */
#define L2CR_L2IO 0x00000400 /* 21: L2 instruction-only. */
#define L2CR_L2CLKSTP 0x00000200 /* 22: L2 clock stop. */
#define L2CR_L2DRO 0x00000100 /* 23: L2DLL rollover checkstop enable. */
#define L2CR_L2IP 0x00000001 /* 31: L2 global invalidate in */
/* progress (read only). */
#define SPR_L3CR 0x3fa /* .6. L3 Control Register */
#define L3CR_L3E 0x80000000 /* 0: L3 enable */
#define L3CR_L3PE 0x40000000 /* 1: L3 data parity enable */
#define L3CR_L3APE 0x20000000
#define L3CR_L3SIZ 0x10000000 /* 3: L3 size (0=1MB, 1=2MB) */
#define L3CR_L3CLKEN 0x08000000 /* 4: Enables L3_CLK[0:1] */
#define L3CR_L3CLK 0x03800000
#define L3CR_L3IO 0x00400000
#define L3CR_L3CLKEXT 0x00200000
#define L3CR_L3CKSPEXT 0x00100000
#define L3CR_L3OH1 0x00080000
#define L3CR_L3SPO 0x00040000
#define L3CR_L3CKSP 0x00030000
#define L3CR_L3PSP 0x0000e000
#define L3CR_L3REP 0x00001000
#define L3CR_L3HWF 0x00000800
#define L3CR_L3I 0x00000400 /* 21: L3 global invalidate */
#define L3CR_L3RT 0x00000300
#define L3CR_L3NIRCA 0x00000080
#define L3CR_L3DO 0x00000040
#define L3CR_PMEN 0x00000004
#define L3CR_PMSIZ 0x00000003
#define SPR_DCCR 0x3fa /* 4.. Data Cache Cachability Register */
#define SPR_ICCR 0x3fb /* 4.. Instruction Cache Cachability Register */
#define SPR_THRM1 0x3fc /* .6. Thermal Management Register */
#define SPR_THRM2 0x3fd /* .6. Thermal Management Register */
#define SPR_THRM_TIN 0x80000000 /* Thermal interrupt bit (RO) */
#define SPR_THRM_TIV 0x40000000 /* Thermal interrupt valid (RO) */
#define SPR_THRM_THRESHOLD(x) ((x) << 23) /* Thermal sensor threshold */
#define SPR_THRM_TID 0x00000004 /* Thermal interrupt direction */
#define SPR_THRM_TIE 0x00000002 /* Thermal interrupt enable */
#define SPR_THRM_VALID 0x00000001 /* Valid bit */
#define SPR_THRM3 0x3fe /* .6. Thermal Management Register */
#define SPR_THRM_TIMER(x) ((x) << 1) /* Sampling interval timer */
#define SPR_THRM_ENABLE 0x00000001 /* TAU Enable */
#define SPR_FPECR 0x3fe /* .6. Floating-Point Exception Cause Register */
/* Time Base Register declarations */
#define TBR_TBL 0x10c /* 468 Time Base Lower - read */
#define TBR_TBU 0x10d /* 468 Time Base Upper - read */
#define TBR_TBWL 0x11c /* 468 Time Base Lower - supervisor, write */
#define TBR_TBWU 0x11d /* 468 Time Base Upper - supervisor, write */
/* Performance counter declarations */
#define PMC_OVERFLOW 0x80000000 /* Counter has overflowed */
/* The first five countable [non-]events are common to many PMC's */
#define PMCN_NONE 0 /* Count nothing */
#define PMCN_CYCLES 1 /* Processor cycles */
#define PMCN_ICOMP 2 /* Instructions completed */
#define PMCN_TBLTRANS 3 /* TBL bit transitions */
#define PCMN_IDISPATCH 4 /* Instructions dispatched */
/* Similar things for the 970 PMC direct counters */
#define PMC970N_NONE 0x8 /* Count nothing */
#define PMC970N_CYCLES 0xf /* Processor cycles */
#define PMC970N_ICOMP 0x9 /* Instructions completed */
#if defined(AIM)
#define SPR_ESR 0x3d4 /* 4.. Exception Syndrome Register */
#define ESR_MCI 0x80000000 /* Machine check - instruction */
#define ESR_PIL 0x08000000 /* Program interrupt - illegal */
#define ESR_PPR 0x04000000 /* Program interrupt - privileged */
#define ESR_PTR 0x02000000 /* Program interrupt - trap */
#define ESR_ST 0x01000000 /* Store operation */
#define ESR_DST 0x00800000 /* Data storage interrupt - store fault */
#define ESR_DIZ 0x00800000 /* Data/instruction storage interrupt - zone fault */
#define ESR_U0F 0x00008000 /* Data storage interrupt - U0 fault */
#elif defined(BOOKE)
#define SPR_MCSR 0x23c /* ..8 Machine Check Syndrome register */
#define SPR_ESR 0x003e /* ..8 Exception Syndrome Register */
#define ESR_PIL 0x08000000 /* Program interrupt - illegal */
#define ESR_PPR 0x04000000 /* Program interrupt - privileged */
#define ESR_PTR 0x02000000 /* Program interrupt - trap */
#define ESR_ST 0x00800000 /* Store operation */
#define ESR_DLK 0x00200000 /* Data storage, D cache locking */
#define ESR_ILK 0x00100000 /* Data storage, I cache locking */
#define ESR_BO 0x00020000 /* Data/instruction storage, byte ordering */
#define ESR_SPE 0x00000080 /* SPE exception bit */
#define SPR_CSRR0 0x03a /* ..8 58 Critical SRR0 */
#define SPR_CSRR1 0x03b /* ..8 59 Critical SRR1 */
#define SPR_MCSRR0 0x23a /* ..8 570 Machine check SRR0 */
#define SPR_MCSRR1 0x23b /* ..8 571 Machine check SRR1 */
#define SPR_MMUCR 0x3b2 /* 4.. MMU Control Register */
#define MMUCR_SWOA (0x80000000 >> 7)
#define MMUCR_U1TE (0x80000000 >> 9)
#define MMUCR_U2SWOAE (0x80000000 >> 10)
#define MMUCR_DULXE (0x80000000 >> 12)
#define MMUCR_IULXE (0x80000000 >> 13)
#define MMUCR_STS (0x80000000 >> 15)
#define MMUCR_STID_MASK (0xFF000000 >> 24)
#define SPR_MMUCSR0 0x3f4 /* ..8 1012 MMU Control and Status Register 0 */
#define MMUCSR0_L2TLB0_FI 0x04 /* TLB0 flash invalidate */
#define MMUCSR0_L2TLB1_FI 0x02 /* TLB1 flash invalidate */
#define SPR_SVR 0x3ff /* ..8 1023 System Version Register */
#define SVR_MPC8533 0x8034
#define SVR_MPC8533E 0x803c
#define SVR_MPC8541 0x8072
#define SVR_MPC8541E 0x807a
#define SVR_MPC8548 0x8031
#define SVR_MPC8548E 0x8039
#define SVR_MPC8555 0x8071
#define SVR_MPC8555E 0x8079
#define SVR_MPC8572 0x80e0
#define SVR_MPC8572E 0x80e8
#define SVR_P1011 0x80e5
#define SVR_P1011E 0x80ed
#define SVR_P1020 0x80e4
#define SVR_P1020E 0x80ec
#define SVR_P2010 0x80e3
#define SVR_P2010E 0x80eb
#define SVR_P2020 0x80e2
#define SVR_P2020E 0x80ea
#define SVR_P2041 0x8210
#define SVR_P2041E 0x8218
#define SVR_P3041 0x8211
#define SVR_P3041E 0x8219
#define SVR_P4040 0x8200
#define SVR_P4040E 0x8208
#define SVR_P4080 0x8201
#define SVR_P4080E 0x8209
#define SVR_P5020 0x8220
#define SVR_P5020E 0x8228
#define SVR_VER(svr) (((svr) >> 16) & 0xffff)
#define SPR_PID0 0x030 /* ..8 Process ID Register 0 */
#define SPR_PID1 0x279 /* ..8 Process ID Register 1 */
#define SPR_PID2 0x27a /* ..8 Process ID Register 2 */
#define SPR_TLB0CFG 0x2B0 /* ..8 TLB 0 Config Register */
#define SPR_TLB1CFG 0x2B1 /* ..8 TLB 1 Config Register */
#define TLBCFG_ASSOC_MASK 0xff000000 /* Associativity of TLB */
#define TLBCFG_ASSOC_SHIFT 24
#define TLBCFG_NENTRY_MASK 0x00000fff /* Number of entries in TLB */
#define SPR_IVPR 0x03f /* ..8 Interrupt Vector Prefix Register */
#define SPR_IVOR0 0x190 /* ..8 Critical input */
#define SPR_IVOR1 0x191 /* ..8 Machine check */
#define SPR_IVOR2 0x192
#define SPR_IVOR3 0x193
#define SPR_IVOR4 0x194
#define SPR_IVOR5 0x195
#define SPR_IVOR6 0x196
#define SPR_IVOR7 0x197
#define SPR_IVOR8 0x198
#define SPR_IVOR9 0x199
#define SPR_IVOR10 0x19a
#define SPR_IVOR11 0x19b
#define SPR_IVOR12 0x19c
#define SPR_IVOR13 0x19d
#define SPR_IVOR14 0x19e
#define SPR_IVOR15 0x19f
#define SPR_IVOR32 0x210
#define SPR_IVOR33 0x211
#define SPR_IVOR34 0x212
#define SPR_IVOR35 0x213
#define SPR_MAS0 0x270 /* ..8 MMU Assist Register 0 Book-E/e500 */
#define SPR_MAS1 0x271 /* ..8 MMU Assist Register 1 Book-E/e500 */
#define SPR_MAS2 0x272 /* ..8 MMU Assist Register 2 Book-E/e500 */
#define SPR_MAS3 0x273 /* ..8 MMU Assist Register 3 Book-E/e500 */
#define SPR_MAS4 0x274 /* ..8 MMU Assist Register 4 Book-E/e500 */
#define SPR_MAS5 0x275 /* ..8 MMU Assist Register 5 Book-E */
#define SPR_MAS6 0x276 /* ..8 MMU Assist Register 6 Book-E/e500 */
#define SPR_MAS7 0x3B0 /* ..8 MMU Assist Register 7 Book-E/e500 */
#define SPR_MAS8 0x155 /* ..8 MMU Assist Register 8 Book-E/e500 */
#define SPR_L1CFG0 0x203 /* ..8 L1 cache configuration register 0 */
#define SPR_L1CFG1 0x204 /* ..8 L1 cache configuration register 1 */
#define SPR_CCR1 0x378
#define CCR1_L2COBE 0x00000040
#define DCR_L2DCDCRAI 0x0000 /* L2 D-Cache DCR Address Pointer */
#define DCR_L2DCDCRDI 0x0001 /* L2 D-Cache DCR Data Indirect */
#define DCR_L2CR0 0x00 /* L2 Cache Configuration Register 0 */
#define L2CR0_AS 0x30000000
#define SPR_L1CSR0 0x3F2 /* ..8 L1 Cache Control and Status Register 0 */
#define L1CSR0_DCPE 0x00010000 /* Data Cache Parity Enable */
#define L1CSR0_DCLFR 0x00000100 /* Data Cache Lock Bits Flash Reset */
#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */
#define SPR_L1CSR1 0x3F3 /* ..8 L1 Cache Control and Status Register 1 */
#define L1CSR1_ICPE 0x00010000 /* Instruction Cache Parity Enable */
#define L1CSR1_ICUL 0x00000400 /* Instr Cache Unable to Lock */
#define L1CSR1_ICLFR 0x00000100 /* Instruction Cache Lock Bits Flash Reset */
#define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */
#define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */
#define SPR_L2CSR0 0x3F9 /* ..8 L2 Cache Control and Status Register 0 */
#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */
#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity Enable */
#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */
#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flags Clear */
#define SPR_BUCSR 0x3F5 /* ..8 Branch Unit Control and Status Register */
#define BUCSR_BPEN 0x00000001 /* Branch Prediction Enable */
#define BUCSR_BBFI 0x00000200 /* Branch Buffer Flash Invalidate */
#endif /* BOOKE */
#endif /* !_POWERPC_SPR_H_ */