freebsd-dev/usr.sbin/moused/moused.c
2005-08-24 17:27:06 +00:00

3232 lines
91 KiB
C

/**
** Copyright (c) 1995 Michael Smith, All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
** 1. Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer as
** the first lines of this file unmodified.
** 2. Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in the
** documentation and/or other materials provided with the distribution.
** 3. All advertising materials mentioning features or use of this software
** must display the following acknowledgment:
** This product includes software developed by Michael Smith.
** 4. The name of the author may not be used to endorse or promote products
** derived from this software without specific prior written permission.
**
**
** THIS SOFTWARE IS PROVIDED BY Michael Smith ``AS IS'' AND ANY
** EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
** PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL Michael Smith BE LIABLE FOR
** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
** CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
** SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
** BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
** WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
** OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
** EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
**/
/**
** MOUSED.C
**
** Mouse daemon : listens to a serial port, the bus mouse interface, or
** the PS/2 mouse port for mouse data stream, interprets data and passes
** ioctls off to the console driver.
**
** The mouse interface functions are derived closely from the mouse
** handler in the XFree86 X server. Many thanks to the XFree86 people
** for their great work!
**
**/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/consio.h>
#include <sys/linker.h>
#include <sys/module.h>
#include <sys/mouse.h>
#include <sys/socket.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/un.h>
#include <ctype.h>
#include <err.h>
#include <errno.h>
#include <fcntl.h>
#include <libutil.h>
#include <limits.h>
#include <setjmp.h>
#include <signal.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <syslog.h>
#include <termios.h>
#include <unistd.h>
#define MAX_CLICKTHRESHOLD 2000 /* 2 seconds */
#define MAX_BUTTON2TIMEOUT 2000 /* 2 seconds */
#define DFLT_CLICKTHRESHOLD 500 /* 0.5 second */
#define DFLT_BUTTON2TIMEOUT 100 /* 0.1 second */
#define DFLT_SCROLLTHRESHOLD 3 /* 3 pixels */
/* Abort 3-button emulation delay after this many movement events. */
#define BUTTON2_MAXMOVE 3
#define TRUE 1
#define FALSE 0
#define MOUSE_XAXIS (-1)
#define MOUSE_YAXIS (-2)
/* Logitech PS2++ protocol */
#define MOUSE_PS2PLUS_CHECKBITS(b) \
((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f))
#define MOUSE_PS2PLUS_PACKET_TYPE(b) \
(((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4))
#define ChordMiddle 0x0001
#define Emulate3Button 0x0002
#define ClearDTR 0x0004
#define ClearRTS 0x0008
#define NoPnP 0x0010
#define VirtualScroll 0x0020
#define HVirtualScroll 0x0040
#define ID_NONE 0
#define ID_PORT 1
#define ID_IF 2
#define ID_TYPE 4
#define ID_MODEL 8
#define ID_ALL (ID_PORT | ID_IF | ID_TYPE | ID_MODEL)
#define debug(fmt, args...) do { \
if (debug && nodaemon) \
warnx(fmt, ##args); \
} while (0)
#define logerr(e, fmt, args...) do { \
log_or_warn(LOG_DAEMON | LOG_ERR, errno, fmt, ##args); \
exit(e); \
} while (0)
#define logerrx(e, fmt, args...) do { \
log_or_warn(LOG_DAEMON | LOG_ERR, 0, fmt, ##args); \
exit(e); \
} while (0)
#define logwarn(fmt, args...) \
log_or_warn(LOG_DAEMON | LOG_WARNING, errno, fmt, ##args)
#define logwarnx(fmt, args...) \
log_or_warn(LOG_DAEMON | LOG_WARNING, 0, fmt, ##args)
/* structures */
/* symbol table entry */
typedef struct {
char *name;
int val;
int val2;
} symtab_t;
/* serial PnP ID string */
typedef struct {
int revision; /* PnP revision, 100 for 1.00 */
char *eisaid; /* EISA ID including mfr ID and product ID */
char *serial; /* serial No, optional */
char *class; /* device class, optional */
char *compat; /* list of compatible drivers, optional */
char *description; /* product description, optional */
int neisaid; /* length of the above fields... */
int nserial;
int nclass;
int ncompat;
int ndescription;
} pnpid_t;
/* global variables */
int debug = 0;
int nodaemon = FALSE;
int background = FALSE;
int identify = ID_NONE;
int extioctl = FALSE;
char *pidfile = "/var/run/moused.pid";
struct pidfh *pfh;
#define SCROLL_NOTSCROLLING 0
#define SCROLL_PREPARE 1
#define SCROLL_SCROLLING 2
static int scroll_state;
static int scroll_movement;
static int hscroll_movement;
/* local variables */
/* interface (the table must be ordered by MOUSE_IF_XXX in mouse.h) */
static symtab_t rifs[] = {
{ "serial", MOUSE_IF_SERIAL },
{ "bus", MOUSE_IF_BUS },
{ "inport", MOUSE_IF_INPORT },
{ "ps/2", MOUSE_IF_PS2 },
{ "sysmouse", MOUSE_IF_SYSMOUSE },
{ "usb", MOUSE_IF_USB },
{ NULL, MOUSE_IF_UNKNOWN },
};
/* types (the table must be ordered by MOUSE_PROTO_XXX in mouse.h) */
static char *rnames[] = {
"microsoft",
"mousesystems",
"logitech",
"mmseries",
"mouseman",
"busmouse",
"inportmouse",
"ps/2",
"mmhitab",
"glidepoint",
"intellimouse",
"thinkingmouse",
"sysmouse",
"x10mouseremote",
"kidspad",
"versapad",
"jogdial",
#if notyet
"mariqua",
#endif
"gtco_digipad",
NULL
};
/* models */
static symtab_t rmodels[] = {
{ "NetScroll", MOUSE_MODEL_NETSCROLL },
{ "NetMouse/NetScroll Optical", MOUSE_MODEL_NET },
{ "GlidePoint", MOUSE_MODEL_GLIDEPOINT },
{ "ThinkingMouse", MOUSE_MODEL_THINK },
{ "IntelliMouse", MOUSE_MODEL_INTELLI },
{ "EasyScroll/SmartScroll", MOUSE_MODEL_EASYSCROLL },
{ "MouseMan+", MOUSE_MODEL_MOUSEMANPLUS },
{ "Kidspad", MOUSE_MODEL_KIDSPAD },
{ "VersaPad", MOUSE_MODEL_VERSAPAD },
{ "IntelliMouse Explorer", MOUSE_MODEL_EXPLORER },
{ "4D Mouse", MOUSE_MODEL_4D },
{ "4D+ Mouse", MOUSE_MODEL_4DPLUS },
{ "Synaptics Touchpad", MOUSE_MODEL_SYNAPTICS },
{ "generic", MOUSE_MODEL_GENERIC },
{ NULL, MOUSE_MODEL_UNKNOWN },
};
/* PnP EISA/product IDs */
static symtab_t pnpprod[] = {
/* Kensignton ThinkingMouse */
{ "KML0001", MOUSE_PROTO_THINK, MOUSE_MODEL_THINK },
/* MS IntelliMouse */
{ "MSH0001", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
/* MS IntelliMouse TrackBall */
{ "MSH0004", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
/* Tremon Wheel Mouse MUSD */
{ "HTK0001", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
/* Genius PnP Mouse */
{ "KYE0001", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
/* MouseSystems SmartScroll Mouse (OEM from Genius?) */
{ "KYE0002", MOUSE_PROTO_MS, MOUSE_MODEL_EASYSCROLL },
/* Genius NetMouse */
{ "KYE0003", MOUSE_PROTO_INTELLI, MOUSE_MODEL_NET },
/* Genius Kidspad, Easypad and other tablets */
{ "KYE0005", MOUSE_PROTO_KIDSPAD, MOUSE_MODEL_KIDSPAD },
/* Genius EZScroll */
{ "KYEEZ00", MOUSE_PROTO_MS, MOUSE_MODEL_EASYSCROLL },
/* Logitech Cordless MouseMan Wheel */
{ "LGI8033", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS },
/* Logitech MouseMan (new 4 button model) */
{ "LGI800C", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS },
/* Logitech MouseMan+ */
{ "LGI8050", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS },
/* Logitech FirstMouse+ */
{ "LGI8051", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS },
/* Logitech serial */
{ "LGI8001", MOUSE_PROTO_LOGIMOUSEMAN, MOUSE_MODEL_GENERIC },
/* A4 Tech 4D/4D+ Mouse */
{ "A4W0005", MOUSE_PROTO_INTELLI, MOUSE_MODEL_4D },
/* 8D Scroll Mouse */
{ "PEC9802", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
/* Mitsumi Wireless Scroll Mouse */
{ "MTM6401", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
/* MS bus */
{ "PNP0F00", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC },
/* MS serial */
{ "PNP0F01", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
/* MS InPort */
{ "PNP0F02", MOUSE_PROTO_INPORT, MOUSE_MODEL_GENERIC },
/* MS PS/2 */
{ "PNP0F03", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
/*
* EzScroll returns PNP0F04 in the compatible device field; but it
* doesn't look compatible... XXX
*/
/* MouseSystems */
{ "PNP0F04", MOUSE_PROTO_MSC, MOUSE_MODEL_GENERIC },
/* MouseSystems */
{ "PNP0F05", MOUSE_PROTO_MSC, MOUSE_MODEL_GENERIC },
#if notyet
/* Genius Mouse */
{ "PNP0F06", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
/* Genius Mouse */
{ "PNP0F07", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
#endif
/* Logitech serial */
{ "PNP0F08", MOUSE_PROTO_LOGIMOUSEMAN, MOUSE_MODEL_GENERIC },
/* MS BallPoint serial */
{ "PNP0F09", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
/* MS PnP serial */
{ "PNP0F0A", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
/* MS PnP BallPoint serial */
{ "PNP0F0B", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
/* MS serial comatible */
{ "PNP0F0C", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
/* MS InPort comatible */
{ "PNP0F0D", MOUSE_PROTO_INPORT, MOUSE_MODEL_GENERIC },
/* MS PS/2 comatible */
{ "PNP0F0E", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
/* MS BallPoint comatible */
{ "PNP0F0F", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
#if notyet
/* TI QuickPort */
{ "PNP0F10", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
#endif
/* MS bus comatible */
{ "PNP0F11", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC },
/* Logitech PS/2 */
{ "PNP0F12", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
/* PS/2 */
{ "PNP0F13", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
#if notyet
/* MS Kids Mouse */
{ "PNP0F14", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
#endif
/* Logitech bus */
{ "PNP0F15", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC },
#if notyet
/* Logitech SWIFT */
{ "PNP0F16", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
#endif
/* Logitech serial compat */
{ "PNP0F17", MOUSE_PROTO_LOGIMOUSEMAN, MOUSE_MODEL_GENERIC },
/* Logitech bus compatible */
{ "PNP0F18", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC },
/* Logitech PS/2 compatible */
{ "PNP0F19", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
#if notyet
/* Logitech SWIFT compatible */
{ "PNP0F1A", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
/* HP Omnibook */
{ "PNP0F1B", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
/* Compaq LTE TrackBall PS/2 */
{ "PNP0F1C", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
/* Compaq LTE TrackBall serial */
{ "PNP0F1D", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
/* MS Kidts Trackball */
{ "PNP0F1E", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
#endif
/* Interlink VersaPad */
{ "LNK0001", MOUSE_PROTO_VERSAPAD, MOUSE_MODEL_VERSAPAD },
{ NULL, MOUSE_PROTO_UNKNOWN, MOUSE_MODEL_GENERIC },
};
/* the table must be ordered by MOUSE_PROTO_XXX in mouse.h */
static unsigned short rodentcflags[] =
{
(CS7 | CREAD | CLOCAL | HUPCL), /* MicroSoft */
(CS8 | CSTOPB | CREAD | CLOCAL | HUPCL), /* MouseSystems */
(CS8 | CSTOPB | CREAD | CLOCAL | HUPCL), /* Logitech */
(CS8 | PARENB | PARODD | CREAD | CLOCAL | HUPCL), /* MMSeries */
(CS7 | CREAD | CLOCAL | HUPCL), /* MouseMan */
0, /* Bus */
0, /* InPort */
0, /* PS/2 */
(CS8 | CREAD | CLOCAL | HUPCL), /* MM HitTablet */
(CS7 | CREAD | CLOCAL | HUPCL), /* GlidePoint */
(CS7 | CREAD | CLOCAL | HUPCL), /* IntelliMouse */
(CS7 | CREAD | CLOCAL | HUPCL), /* Thinking Mouse */
(CS8 | CSTOPB | CREAD | CLOCAL | HUPCL), /* sysmouse */
(CS7 | CREAD | CLOCAL | HUPCL), /* X10 MouseRemote */
(CS8 | PARENB | PARODD | CREAD | CLOCAL | HUPCL), /* kidspad etc. */
(CS8 | CREAD | CLOCAL | HUPCL), /* VersaPad */
0, /* JogDial */
#if notyet
(CS8 | CSTOPB | CREAD | CLOCAL | HUPCL), /* Mariqua */
#endif
(CS8 | CREAD | HUPCL ), /* GTCO Digi-Pad */
};
static struct rodentparam {
int flags;
char *portname; /* /dev/XXX */
int rtype; /* MOUSE_PROTO_XXX */
int level; /* operation level: 0 or greater */
int baudrate;
int rate; /* report rate */
int resolution; /* MOUSE_RES_XXX or a positive number */
int zmap[4]; /* MOUSE_{X|Y}AXIS or a button number */
int wmode; /* wheel mode button number */
int mfd; /* mouse file descriptor */
int cfd; /* /dev/consolectl file descriptor */
int mremsfd; /* mouse remote server file descriptor */
int mremcfd; /* mouse remote client file descriptor */
long clickthreshold; /* double click speed in msec */
long button2timeout; /* 3 button emulation timeout */
mousehw_t hw; /* mouse device hardware information */
mousemode_t mode; /* protocol information */
float accelx; /* Acceleration in the X axis */
float accely; /* Acceleration in the Y axis */
int scrollthreshold; /* Movement distance before virtual scrolling */
} rodent = {
.flags = 0,
.portname = NULL,
.rtype = MOUSE_PROTO_UNKNOWN,
.level = -1,
.baudrate = 1200,
.rate = 0,
.resolution = MOUSE_RES_UNKNOWN,
.zmap = { 0, 0, 0, 0 },
.wmode = 0,
.mfd = -1,
.cfd = -1,
.mremsfd = -1,
.mremcfd = -1,
.clickthreshold = DFLT_CLICKTHRESHOLD,
.button2timeout = DFLT_BUTTON2TIMEOUT,
.accelx = 1.0,
.accely = 1.0,
.scrollthreshold = DFLT_SCROLLTHRESHOLD,
};
/* button status */
struct button_state {
int count; /* 0: up, 1: single click, 2: double click,... */
struct timeval tv; /* timestamp on the last button event */
};
static struct button_state bstate[MOUSE_MAXBUTTON]; /* button state */
static struct button_state *mstate[MOUSE_MAXBUTTON];/* mapped button st.*/
static struct button_state zstate[4]; /* Z/W axis state */
/* state machine for 3 button emulation */
#define S0 0 /* start */
#define S1 1 /* button 1 delayed down */
#define S2 2 /* button 3 delayed down */
#define S3 3 /* both buttons down -> button 2 down */
#define S4 4 /* button 1 delayed up */
#define S5 5 /* button 1 down */
#define S6 6 /* button 3 down */
#define S7 7 /* both buttons down */
#define S8 8 /* button 3 delayed up */
#define S9 9 /* button 1 or 3 up after S3 */
#define A(b1, b3) (((b1) ? 2 : 0) | ((b3) ? 1 : 0))
#define A_TIMEOUT 4
#define S_DELAYED(st) (states[st].s[A_TIMEOUT] != (st))
static struct {
int s[A_TIMEOUT + 1];
int buttons;
int mask;
int timeout;
} states[10] = {
/* S0 */
{ { S0, S2, S1, S3, S0 }, 0, ~(MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN), FALSE },
/* S1 */
{ { S4, S2, S1, S3, S5 }, 0, ~MOUSE_BUTTON1DOWN, FALSE },
/* S2 */
{ { S8, S2, S1, S3, S6 }, 0, ~MOUSE_BUTTON3DOWN, FALSE },
/* S3 */
{ { S0, S9, S9, S3, S3 }, MOUSE_BUTTON2DOWN, ~0, FALSE },
/* S4 */
{ { S0, S2, S1, S3, S0 }, MOUSE_BUTTON1DOWN, ~0, TRUE },
/* S5 */
{ { S0, S2, S5, S7, S5 }, MOUSE_BUTTON1DOWN, ~0, FALSE },
/* S6 */
{ { S0, S6, S1, S7, S6 }, MOUSE_BUTTON3DOWN, ~0, FALSE },
/* S7 */
{ { S0, S6, S5, S7, S7 }, MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, ~0, FALSE },
/* S8 */
{ { S0, S2, S1, S3, S0 }, MOUSE_BUTTON3DOWN, ~0, TRUE },
/* S9 */
{ { S0, S9, S9, S3, S9 }, 0, ~(MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN), FALSE },
};
static int mouse_button_state;
static struct timeval mouse_button_state_tv;
static int mouse_move_delayed;
static jmp_buf env;
/* function prototypes */
static void moused(void);
static void hup(int sig);
static void cleanup(int sig);
static void usage(void);
static void log_or_warn(int log_pri, int errnum, const char *fmt, ...)
__printflike(3, 4);
static int r_identify(void);
static char *r_if(int type);
static char *r_name(int type);
static char *r_model(int model);
static void r_init(void);
static int r_protocol(u_char b, mousestatus_t *act);
static int r_statetrans(mousestatus_t *a1, mousestatus_t *a2, int trans);
static int r_installmap(char *arg);
static void r_map(mousestatus_t *act1, mousestatus_t *act2);
static void r_timestamp(mousestatus_t *act);
static int r_timeout(void);
static void r_click(mousestatus_t *act);
static void setmousespeed(int old, int new, unsigned cflag);
static int pnpwakeup1(void);
static int pnpwakeup2(void);
static int pnpgets(char *buf);
static int pnpparse(pnpid_t *id, char *buf, int len);
static symtab_t *pnpproto(pnpid_t *id);
static symtab_t *gettoken(symtab_t *tab, char *s, int len);
static char *gettokenname(symtab_t *tab, int val);
static void mremote_serversetup();
static void mremote_clientchg(int add);
static int kidspad(u_char rxc, mousestatus_t *act);
static int gtco_digipad(u_char, mousestatus_t *);
static int usbmodule(void);
int
main(int argc, char *argv[])
{
int c;
int i;
int j;
int retry;
for (i = 0; i < MOUSE_MAXBUTTON; ++i)
mstate[i] = &bstate[i];
while ((c = getopt(argc, argv, "3C:DE:F:HI:PRS:VU:a:cdfhi:l:m:p:r:st:w:z:")) != -1)
switch(c) {
case '3':
rodent.flags |= Emulate3Button;
break;
case 'E':
rodent.button2timeout = atoi(optarg);
if ((rodent.button2timeout < 0) ||
(rodent.button2timeout > MAX_BUTTON2TIMEOUT)) {
warnx("invalid argument `%s'", optarg);
usage();
}
break;
case 'a':
i = sscanf(optarg, "%f,%f", &rodent.accelx, &rodent.accely);
if (i == 0) {
warnx("invalid acceleration argument '%s'", optarg);
usage();
}
if (i == 1)
rodent.accely = rodent.accelx;
break;
case 'c':
rodent.flags |= ChordMiddle;
break;
case 'd':
++debug;
break;
case 'f':
nodaemon = TRUE;
break;
case 'i':
if (strcmp(optarg, "all") == 0)
identify = ID_ALL;
else if (strcmp(optarg, "port") == 0)
identify = ID_PORT;
else if (strcmp(optarg, "if") == 0)
identify = ID_IF;
else if (strcmp(optarg, "type") == 0)
identify = ID_TYPE;
else if (strcmp(optarg, "model") == 0)
identify = ID_MODEL;
else {
warnx("invalid argument `%s'", optarg);
usage();
}
nodaemon = TRUE;
break;
case 'l':
rodent.level = atoi(optarg);
if ((rodent.level < 0) || (rodent.level > 4)) {
warnx("invalid argument `%s'", optarg);
usage();
}
break;
case 'm':
if (!r_installmap(optarg)) {
warnx("invalid argument `%s'", optarg);
usage();
}
break;
case 'p':
rodent.portname = optarg;
break;
case 'r':
if (strcmp(optarg, "high") == 0)
rodent.resolution = MOUSE_RES_HIGH;
else if (strcmp(optarg, "medium-high") == 0)
rodent.resolution = MOUSE_RES_HIGH;
else if (strcmp(optarg, "medium-low") == 0)
rodent.resolution = MOUSE_RES_MEDIUMLOW;
else if (strcmp(optarg, "low") == 0)
rodent.resolution = MOUSE_RES_LOW;
else if (strcmp(optarg, "default") == 0)
rodent.resolution = MOUSE_RES_DEFAULT;
else {
rodent.resolution = atoi(optarg);
if (rodent.resolution <= 0) {
warnx("invalid argument `%s'", optarg);
usage();
}
}
break;
case 's':
rodent.baudrate = 9600;
break;
case 'w':
i = atoi(optarg);
if ((i <= 0) || (i > MOUSE_MAXBUTTON)) {
warnx("invalid argument `%s'", optarg);
usage();
}
rodent.wmode = 1 << (i - 1);
break;
case 'z':
if (strcmp(optarg, "x") == 0)
rodent.zmap[0] = MOUSE_XAXIS;
else if (strcmp(optarg, "y") == 0)
rodent.zmap[0] = MOUSE_YAXIS;
else {
i = atoi(optarg);
/*
* Use button i for negative Z axis movement and
* button (i + 1) for positive Z axis movement.
*/
if ((i <= 0) || (i > MOUSE_MAXBUTTON - 1)) {
warnx("invalid argument `%s'", optarg);
usage();
}
rodent.zmap[0] = i;
rodent.zmap[1] = i + 1;
debug("optind: %d, optarg: '%s'", optind, optarg);
for (j = 1; j < 4; ++j) {
if ((optind >= argc) || !isdigit(*argv[optind]))
break;
i = atoi(argv[optind]);
if ((i <= 0) || (i > MOUSE_MAXBUTTON - 1)) {
warnx("invalid argument `%s'", argv[optind]);
usage();
}
rodent.zmap[j] = i;
++optind;
}
if ((rodent.zmap[2] != 0) && (rodent.zmap[3] == 0))
rodent.zmap[3] = rodent.zmap[2] + 1;
}
break;
case 'C':
rodent.clickthreshold = atoi(optarg);
if ((rodent.clickthreshold < 0) ||
(rodent.clickthreshold > MAX_CLICKTHRESHOLD)) {
warnx("invalid argument `%s'", optarg);
usage();
}
break;
case 'D':
rodent.flags |= ClearDTR;
break;
case 'F':
rodent.rate = atoi(optarg);
if (rodent.rate <= 0) {
warnx("invalid argument `%s'", optarg);
usage();
}
break;
case 'H':
rodent.flags |= HVirtualScroll;
break;
case 'I':
pidfile = optarg;
break;
case 'P':
rodent.flags |= NoPnP;
break;
case 'R':
rodent.flags |= ClearRTS;
break;
case 'S':
rodent.baudrate = atoi(optarg);
if (rodent.baudrate <= 0) {
warnx("invalid argument `%s'", optarg);
usage();
}
debug("rodent baudrate %d", rodent.baudrate);
break;
case 't':
if (strcmp(optarg, "auto") == 0) {
rodent.rtype = MOUSE_PROTO_UNKNOWN;
rodent.flags &= ~NoPnP;
rodent.level = -1;
break;
}
for (i = 0; rnames[i]; i++)
if (strcmp(optarg, rnames[i]) == 0) {
rodent.rtype = i;
rodent.flags |= NoPnP;
rodent.level = (i == MOUSE_PROTO_SYSMOUSE) ? 1 : 0;
break;
}
if (rnames[i])
break;
warnx("no such mouse type `%s'", optarg);
usage();
case 'V':
rodent.flags |= VirtualScroll;
break;
case 'U':
rodent.scrollthreshold = atoi(optarg);
if (rodent.scrollthreshold < 0) {
warnx("invalid argument `%s'", optarg);
usage();
}
break;
case 'h':
case '?':
default:
usage();
}
/* fix Z axis mapping */
for (i = 0; i < 4; ++i) {
if (rodent.zmap[i] > 0) {
for (j = 0; j < MOUSE_MAXBUTTON; ++j) {
if (mstate[j] == &bstate[rodent.zmap[i] - 1])
mstate[j] = &zstate[i];
}
rodent.zmap[i] = 1 << (rodent.zmap[i] - 1);
}
}
/* the default port name */
switch(rodent.rtype) {
case MOUSE_PROTO_INPORT:
/* INPORT and BUS are the same... */
rodent.rtype = MOUSE_PROTO_BUS;
/* FALLTHROUGH */
case MOUSE_PROTO_BUS:
if (!rodent.portname)
rodent.portname = "/dev/mse0";
break;
case MOUSE_PROTO_PS2:
if (!rodent.portname)
rodent.portname = "/dev/psm0";
break;
default:
if (rodent.portname)
break;
warnx("no port name specified");
usage();
}
retry = 1;
if (strncmp(rodent.portname, "/dev/ums", 8) == 0) {
if (usbmodule() != 0)
retry = 5;
}
for (;;) {
if (setjmp(env) == 0) {
signal(SIGHUP, hup);
signal(SIGINT , cleanup);
signal(SIGQUIT, cleanup);
signal(SIGTERM, cleanup);
for (i = 0; i < retry; ++i) {
if (i > 0)
sleep(2);
rodent.mfd = open(rodent.portname, O_RDWR | O_NONBLOCK);
if (rodent.mfd != -1 || errno != ENOENT)
break;
}
if (rodent.mfd == -1)
logerr(1, "unable to open %s", rodent.portname);
if (r_identify() == MOUSE_PROTO_UNKNOWN) {
logwarnx("cannot determine mouse type on %s", rodent.portname);
close(rodent.mfd);
rodent.mfd = -1;
}
/* print some information */
if (identify != ID_NONE) {
if (identify == ID_ALL)
printf("%s %s %s %s\n",
rodent.portname, r_if(rodent.hw.iftype),
r_name(rodent.rtype), r_model(rodent.hw.model));
else if (identify & ID_PORT)
printf("%s\n", rodent.portname);
else if (identify & ID_IF)
printf("%s\n", r_if(rodent.hw.iftype));
else if (identify & ID_TYPE)
printf("%s\n", r_name(rodent.rtype));
else if (identify & ID_MODEL)
printf("%s\n", r_model(rodent.hw.model));
exit(0);
} else {
debug("port: %s interface: %s type: %s model: %s",
rodent.portname, r_if(rodent.hw.iftype),
r_name(rodent.rtype), r_model(rodent.hw.model));
}
if (rodent.mfd == -1) {
/*
* We cannot continue because of error. Exit if the
* program has not become a daemon. Otherwise, block
* until the the user corrects the problem and issues SIGHUP.
*/
if (!background)
exit(1);
sigpause(0);
}
r_init(); /* call init function */
moused();
}
if (rodent.mfd != -1)
close(rodent.mfd);
if (rodent.cfd != -1)
close(rodent.cfd);
rodent.mfd = rodent.cfd = -1;
}
/* NOT REACHED */
exit(0);
}
static int
usbmodule(void)
{
struct kld_file_stat fstat;
struct module_stat mstat;
int fileid, modid;
int loaded;
for (loaded = 0, fileid = kldnext(0); !loaded && fileid > 0;
fileid = kldnext(fileid)) {
fstat.version = sizeof(fstat);
if (kldstat(fileid, &fstat) < 0)
continue;
if (strncmp(fstat.name, "uhub/ums", 8) == 0) {
loaded = 1;
break;
}
for (modid = kldfirstmod(fileid); modid > 0;
modid = modfnext(modid)) {
mstat.version = sizeof(mstat);
if (modstat(modid, &mstat) < 0)
continue;
if (strncmp(mstat.name, "uhub/ums", 8) == 0) {
loaded = 1;
break;
}
}
}
if (!loaded) {
if (kldload("ums") != -1)
return 1;
if (errno != EEXIST)
logerr(1, "unable to load USB mouse driver");
}
return 0;
}
static void
moused(void)
{
struct mouse_info mouse;
mousestatus_t action0; /* original mouse action */
mousestatus_t action; /* interrim buffer */
mousestatus_t action2; /* mapped action */
struct timeval timeout;
fd_set fds;
u_char b;
pid_t mpid;
int flags;
int c;
int i;
if ((rodent.cfd = open("/dev/consolectl", O_RDWR, 0)) == -1)
logerr(1, "cannot open /dev/consolectl");
if (!nodaemon && !background) {
pfh = pidfile_open(pidfile, 0644, &mpid);
if (pfh == NULL) {
if (errno == EEXIST)
logerrx(1, "moused already running, pid: %d", mpid);
logwarn("cannot open pid file");
}
if (daemon(0, 0)) {
int saved_errno = errno;
pidfile_remove(pfh);
errno = saved_errno;
logerr(1, "failed to become a daemon");
} else {
background = TRUE;
pidfile_write(pfh);
}
}
/* clear mouse data */
bzero(&action0, sizeof(action0));
bzero(&action, sizeof(action));
bzero(&action2, sizeof(action2));
bzero(&mouse, sizeof(mouse));
mouse_button_state = S0;
gettimeofday(&mouse_button_state_tv, NULL);
mouse_move_delayed = 0;
for (i = 0; i < MOUSE_MAXBUTTON; ++i) {
bstate[i].count = 0;
bstate[i].tv = mouse_button_state_tv;
}
for (i = 0; i < sizeof(zstate)/sizeof(zstate[0]); ++i) {
zstate[i].count = 0;
zstate[i].tv = mouse_button_state_tv;
}
/* choose which ioctl command to use */
mouse.operation = MOUSE_MOTION_EVENT;
extioctl = (ioctl(rodent.cfd, CONS_MOUSECTL, &mouse) == 0);
/* process mouse data */
timeout.tv_sec = 0;
timeout.tv_usec = 20000; /* 20 msec */
for (;;) {
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
if (rodent.mremsfd >= 0)
FD_SET(rodent.mremsfd, &fds);
if (rodent.mremcfd >= 0)
FD_SET(rodent.mremcfd, &fds);
c = select(FD_SETSIZE, &fds, NULL, NULL,
(rodent.flags & Emulate3Button) ? &timeout : NULL);
if (c < 0) { /* error */
logwarn("failed to read from mouse");
continue;
} else if (c == 0) { /* timeout */
/* assert(rodent.flags & Emulate3Button) */
action0.button = action0.obutton;
action0.dx = action0.dy = action0.dz = 0;
action0.flags = flags = 0;
if (r_timeout() && r_statetrans(&action0, &action, A_TIMEOUT)) {
if (debug > 2)
debug("flags:%08x buttons:%08x obuttons:%08x",
action.flags, action.button, action.obutton);
} else {
action0.obutton = action0.button;
continue;
}
} else {
/* MouseRemote client connect/disconnect */
if ((rodent.mremsfd >= 0) && FD_ISSET(rodent.mremsfd, &fds)) {
mremote_clientchg(TRUE);
continue;
}
if ((rodent.mremcfd >= 0) && FD_ISSET(rodent.mremcfd, &fds)) {
mremote_clientchg(FALSE);
continue;
}
/* mouse movement */
if (read(rodent.mfd, &b, 1) == -1) {
if (errno == EWOULDBLOCK)
continue;
else
return;
}
if ((flags = r_protocol(b, &action0)) == 0)
continue;
if ((rodent.flags & VirtualScroll) || (rodent.flags & HVirtualScroll)) {
/* Allow middle button drags to scroll up and down */
if (action0.button == MOUSE_BUTTON2DOWN) {
if (scroll_state == SCROLL_NOTSCROLLING) {
scroll_state = SCROLL_PREPARE;
debug("PREPARING TO SCROLL");
}
debug("[BUTTON2] flags:%08x buttons:%08x obuttons:%08x",
action.flags, action.button, action.obutton);
} else {
debug("[NOTBUTTON2] flags:%08x buttons:%08x obuttons:%08x",
action.flags, action.button, action.obutton);
/* This isn't a middle button down... move along... */
if (scroll_state == SCROLL_SCROLLING) {
/*
* We were scrolling, someone let go of button 2.
* Now turn autoscroll off.
*/
scroll_state = SCROLL_NOTSCROLLING;
debug("DONE WITH SCROLLING / %d", scroll_state);
} else if (scroll_state == SCROLL_PREPARE) {
mousestatus_t newaction = action0;
/* We were preparing to scroll, but we never moved... */
r_timestamp(&action0);
r_statetrans(&action0, &newaction,
A(newaction.button & MOUSE_BUTTON1DOWN,
action0.button & MOUSE_BUTTON3DOWN));
/* Send middle down */
newaction.button = MOUSE_BUTTON2DOWN;
r_click(&newaction);
/* Send middle up */
r_timestamp(&newaction);
newaction.obutton = newaction.button;
newaction.button = action0.button;
r_click(&newaction);
}
}
}
r_timestamp(&action0);
r_statetrans(&action0, &action,
A(action0.button & MOUSE_BUTTON1DOWN,
action0.button & MOUSE_BUTTON3DOWN));
debug("flags:%08x buttons:%08x obuttons:%08x", action.flags,
action.button, action.obutton);
}
action0.obutton = action0.button;
flags &= MOUSE_POSCHANGED;
flags |= action.obutton ^ action.button;
action.flags = flags;
if (flags) { /* handler detected action */
r_map(&action, &action2);
debug("activity : buttons 0x%08x dx %d dy %d dz %d",
action2.button, action2.dx, action2.dy, action2.dz);
if ((rodent.flags & VirtualScroll) || (rodent.flags & HVirtualScroll)) {
/*
* If *only* the middle button is pressed AND we are moving
* the stick/trackpoint/nipple, scroll!
*/
if (scroll_state == SCROLL_PREPARE) {
/* Ok, Set we're really scrolling now.... */
if (action2.dy || action2.dx)
scroll_state = SCROLL_SCROLLING;
}
if (scroll_state == SCROLL_SCROLLING) {
if (rodent.flags & VirtualScroll) {
scroll_movement += action2.dy;
debug("SCROLL: %d", scroll_movement);
if (scroll_movement < -rodent.scrollthreshold) {
/* Scroll down */
action2.dz = -1;
scroll_movement = 0;
}
else if (scroll_movement > rodent.scrollthreshold) {
/* Scroll up */
action2.dz = 1;
scroll_movement = 0;
}
}
if (rodent.flags & HVirtualScroll) {
hscroll_movement += action2.dx;
debug("HORIZONTAL SCROLL: %d", hscroll_movement);
if (hscroll_movement < -rodent.scrollthreshold) {
action2.dz = -2;
hscroll_movement = 0;
}
else if (hscroll_movement > rodent.scrollthreshold) {
action2.dz = 2;
hscroll_movement = 0;
}
}
/* Don't move while scrolling */
action2.dx = action2.dy = 0;
}
}
if (extioctl) {
/* Defer clicks until we aren't VirtualScroll'ing. */
if (scroll_state == SCROLL_NOTSCROLLING)
r_click(&action2);
if (action2.flags & MOUSE_POSCHANGED) {
mouse.operation = MOUSE_MOTION_EVENT;
mouse.u.data.buttons = action2.button;
mouse.u.data.x = action2.dx * rodent.accelx;
mouse.u.data.y = action2.dy * rodent.accely;
mouse.u.data.z = action2.dz;
if (debug < 2)
ioctl(rodent.cfd, CONS_MOUSECTL, &mouse);
}
} else {
mouse.operation = MOUSE_ACTION;
mouse.u.data.buttons = action2.button;
mouse.u.data.x = action2.dx * rodent.accelx;
mouse.u.data.y = action2.dy * rodent.accely;
mouse.u.data.z = action2.dz;
if (debug < 2)
ioctl(rodent.cfd, CONS_MOUSECTL, &mouse);
}
/*
* If the Z axis movement is mapped to an imaginary physical
* button, we need to cook up a corresponding button `up' event
* after sending a button `down' event.
*/
if ((rodent.zmap[0] > 0) && (action.dz != 0)) {
action.obutton = action.button;
action.dx = action.dy = action.dz = 0;
r_map(&action, &action2);
debug("activity : buttons 0x%08x dx %d dy %d dz %d",
action2.button, action2.dx, action2.dy, action2.dz);
if (extioctl) {
r_click(&action2);
} else {
mouse.operation = MOUSE_ACTION;
mouse.u.data.buttons = action2.button;
mouse.u.data.x = mouse.u.data.y = mouse.u.data.z = 0;
if (debug < 2)
ioctl(rodent.cfd, CONS_MOUSECTL, &mouse);
}
}
}
}
/* NOT REACHED */
}
static void
hup(int sig)
{
longjmp(env, 1);
}
static void
cleanup(int sig)
{
if (rodent.rtype == MOUSE_PROTO_X10MOUSEREM)
unlink(_PATH_MOUSEREMOTE);
exit(0);
}
/**
** usage
**
** Complain, and free the CPU for more worthy tasks
**/
static void
usage(void)
{
fprintf(stderr, "%s\n%s\n%s\n%s\n",
"usage: moused [-DRcdfs] [-I file] [-F rate] [-r resolution] [-S baudrate]",
" [-VH [-U threshold]] [-a X [,Y]] [-C threshold] [-m N=M] [-w N]",
" [-z N] [-t <mousetype>] [-l level] [-3 [-E timeout]] -p <port>",
" moused [-d] -i <port|if|type|model|all> -p <port>");
exit(1);
}
/*
* Output an error message to syslog or stderr as appropriate. If
* `errnum' is non-zero, append its string form to the message.
*/
static void
log_or_warn(int log_pri, int errnum, const char *fmt, ...)
{
va_list ap;
char buf[256];
va_start(ap, fmt);
vsnprintf(buf, sizeof(buf), fmt, ap);
va_end(ap);
if (errnum) {
strlcat(buf, ": ", sizeof(buf));
strlcat(buf, strerror(errnum), sizeof(buf));
}
if (background)
syslog(log_pri, "%s", buf);
else
warnx("%s", buf);
}
/**
** Mouse interface code, courtesy of XFree86 3.1.2.
**
** Note: Various bits have been trimmed, and in my shortsighted enthusiasm
** to clean, reformat and rationalise naming, it's quite possible that
** some things in here have been broken.
**
** I hope not 8)
**
** The following code is derived from a module marked :
**/
/* $XConsortium: xf86_Mouse.c,v 1.2 94/10/12 20:33:21 kaleb Exp $ */
/* $XFree86: xc/programs/Xserver/hw/xfree86/common/xf86_Mouse.c,v 3.2 1995/01/28
17:03:40 dawes Exp $ */
/*
*
* Copyright 1990,91 by Thomas Roell, Dinkelscherben, Germany.
* Copyright 1993 by David Dawes <dawes@physics.su.oz.au>
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that
* copyright notice and this permission notice appear in supporting
* documentation, and that the names of Thomas Roell and David Dawes not be
* used in advertising or publicity pertaining to distribution of the
* software without specific, written prior permission. Thomas Roell
* and David Dawes makes no representations about the suitability of this
* software for any purpose. It is provided "as is" without express or
* implied warranty.
*
* THOMAS ROELL AND DAVID DAWES DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
* SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS, IN NO EVENT SHALL THOMAS ROELL OR DAVID DAWES BE LIABLE FOR ANY
* SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
* RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
* CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
/**
** GlidePoint support from XFree86 3.2.
** Derived from the module:
**/
/* $XFree86: xc/programs/Xserver/hw/xfree86/common/xf86_Mouse.c,v 3.19 1996/10/16 14:40:51 dawes Exp $ */
/* $XConsortium: xf86_Mouse.c /main/10 1996/01/30 15:16:12 kaleb $ */
/* the following table must be ordered by MOUSE_PROTO_XXX in mouse.h */
static unsigned char proto[][7] = {
/* hd_mask hd_id dp_mask dp_id bytes b4_mask b4_id */
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x23, 0x00 }, /* MicroSoft */
{ 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* MouseSystems */
{ 0xe0, 0x80, 0x80, 0x00, 3, 0x00, 0xff }, /* Logitech */
{ 0xe0, 0x80, 0x80, 0x00, 3, 0x00, 0xff }, /* MMSeries */
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x33, 0x00 }, /* MouseMan */
{ 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* Bus */
{ 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* InPort */
{ 0xc0, 0x00, 0x00, 0x00, 3, 0x00, 0xff }, /* PS/2 mouse */
{ 0xe0, 0x80, 0x80, 0x00, 3, 0x00, 0xff }, /* MM HitTablet */
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x33, 0x00 }, /* GlidePoint */
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x3f, 0x00 }, /* IntelliMouse */
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x33, 0x00 }, /* ThinkingMouse */
{ 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* sysmouse */
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x23, 0x00 }, /* X10 MouseRem */
{ 0x80, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* KIDSPAD */
{ 0xc3, 0xc0, 0x00, 0x00, 6, 0x00, 0xff }, /* VersaPad */
{ 0x00, 0x00, 0x00, 0x00, 1, 0x00, 0xff }, /* JogDial */
#if notyet
{ 0xf8, 0x80, 0x00, 0x00, 5, ~0x2f, 0x10 }, /* Mariqua */
#endif
};
static unsigned char cur_proto[7];
static int
r_identify(void)
{
char pnpbuf[256]; /* PnP identifier string may be up to 256 bytes long */
pnpid_t pnpid;
symtab_t *t;
int level;
int len;
/* set the driver operation level, if applicable */
if (rodent.level < 0)
rodent.level = 1;
ioctl(rodent.mfd, MOUSE_SETLEVEL, &rodent.level);
rodent.level = (ioctl(rodent.mfd, MOUSE_GETLEVEL, &level) == 0) ? level : 0;
/*
* Interrogate the driver and get some intelligence on the device...
* The following ioctl functions are not always supported by device
* drivers. When the driver doesn't support them, we just trust the
* user to supply valid information.
*/
rodent.hw.iftype = MOUSE_IF_UNKNOWN;
rodent.hw.model = MOUSE_MODEL_GENERIC;
ioctl(rodent.mfd, MOUSE_GETHWINFO, &rodent.hw);
if (rodent.rtype != MOUSE_PROTO_UNKNOWN)
bcopy(proto[rodent.rtype], cur_proto, sizeof(cur_proto));
rodent.mode.protocol = MOUSE_PROTO_UNKNOWN;
rodent.mode.rate = -1;
rodent.mode.resolution = MOUSE_RES_UNKNOWN;
rodent.mode.accelfactor = 0;
rodent.mode.level = 0;
if (ioctl(rodent.mfd, MOUSE_GETMODE, &rodent.mode) == 0) {
if ((rodent.mode.protocol == MOUSE_PROTO_UNKNOWN)
|| (rodent.mode.protocol >= sizeof(proto)/sizeof(proto[0]))) {
logwarnx("unknown mouse protocol (%d)", rodent.mode.protocol);
return MOUSE_PROTO_UNKNOWN;
} else {
/* INPORT and BUS are the same... */
if (rodent.mode.protocol == MOUSE_PROTO_INPORT)
rodent.mode.protocol = MOUSE_PROTO_BUS;
if (rodent.mode.protocol != rodent.rtype) {
/* Hmm, the driver doesn't agree with the user... */
if (rodent.rtype != MOUSE_PROTO_UNKNOWN)
logwarnx("mouse type mismatch (%s != %s), %s is assumed",
r_name(rodent.mode.protocol), r_name(rodent.rtype),
r_name(rodent.mode.protocol));
rodent.rtype = rodent.mode.protocol;
bcopy(proto[rodent.rtype], cur_proto, sizeof(cur_proto));
}
}
cur_proto[4] = rodent.mode.packetsize;
cur_proto[0] = rodent.mode.syncmask[0]; /* header byte bit mask */
cur_proto[1] = rodent.mode.syncmask[1]; /* header bit pattern */
}
/* maybe this is a PnP mouse... */
if (rodent.mode.protocol == MOUSE_PROTO_UNKNOWN) {
if (rodent.flags & NoPnP)
return rodent.rtype;
if (((len = pnpgets(pnpbuf)) <= 0) || !pnpparse(&pnpid, pnpbuf, len))
return rodent.rtype;
debug("PnP serial mouse: '%*.*s' '%*.*s' '%*.*s'",
pnpid.neisaid, pnpid.neisaid, pnpid.eisaid,
pnpid.ncompat, pnpid.ncompat, pnpid.compat,
pnpid.ndescription, pnpid.ndescription, pnpid.description);
/* we have a valid PnP serial device ID */
rodent.hw.iftype = MOUSE_IF_SERIAL;
t = pnpproto(&pnpid);
if (t != NULL) {
rodent.mode.protocol = t->val;
rodent.hw.model = t->val2;
} else {
rodent.mode.protocol = MOUSE_PROTO_UNKNOWN;
}
if (rodent.mode.protocol == MOUSE_PROTO_INPORT)
rodent.mode.protocol = MOUSE_PROTO_BUS;
/* make final adjustment */
if (rodent.mode.protocol != MOUSE_PROTO_UNKNOWN) {
if (rodent.mode.protocol != rodent.rtype) {
/* Hmm, the device doesn't agree with the user... */
if (rodent.rtype != MOUSE_PROTO_UNKNOWN)
logwarnx("mouse type mismatch (%s != %s), %s is assumed",
r_name(rodent.mode.protocol), r_name(rodent.rtype),
r_name(rodent.mode.protocol));
rodent.rtype = rodent.mode.protocol;
bcopy(proto[rodent.rtype], cur_proto, sizeof(cur_proto));
}
}
}
debug("proto params: %02x %02x %02x %02x %d %02x %02x",
cur_proto[0], cur_proto[1], cur_proto[2], cur_proto[3],
cur_proto[4], cur_proto[5], cur_proto[6]);
return rodent.rtype;
}
static char *
r_if(int iftype)
{
char *s;
s = gettokenname(rifs, iftype);
return (s == NULL) ? "unknown" : s;
}
static char *
r_name(int type)
{
return ((type == MOUSE_PROTO_UNKNOWN)
|| (type > sizeof(rnames)/sizeof(rnames[0]) - 1))
? "unknown" : rnames[type];
}
static char *
r_model(int model)
{
char *s;
s = gettokenname(rmodels, model);
return (s == NULL) ? "unknown" : s;
}
static void
r_init(void)
{
unsigned char buf[16]; /* scrach buffer */
fd_set fds;
char *s;
char c;
int i;
/**
** This comment is a little out of context here, but it contains
** some useful information...
********************************************************************
**
** The following lines take care of the Logitech MouseMan protocols.
**
** NOTE: There are different versions of both MouseMan and TrackMan!
** Hence I add another protocol P_LOGIMAN, which the user can
** specify as MouseMan in his XF86Config file. This entry was
** formerly handled as a special case of P_MS. However, people
** who don't have the middle button problem, can still specify
** Microsoft and use P_MS.
**
** By default, these mice should use a 3 byte Microsoft protocol
** plus a 4th byte for the middle button. However, the mouse might
** have switched to a different protocol before we use it, so I send
** the proper sequence just in case.
**
** NOTE: - all commands to (at least the European) MouseMan have to
** be sent at 1200 Baud.
** - each command starts with a '*'.
** - whenever the MouseMan receives a '*', it will switch back
** to 1200 Baud. Hence I have to select the desired protocol
** first, then select the baud rate.
**
** The protocols supported by the (European) MouseMan are:
** - 5 byte packed binary protocol, as with the Mouse Systems
** mouse. Selected by sequence "*U".
** - 2 button 3 byte MicroSoft compatible protocol. Selected
** by sequence "*V".
** - 3 button 3+1 byte MicroSoft compatible protocol (default).
** Selected by sequence "*X".
**
** The following baud rates are supported:
** - 1200 Baud (default). Selected by sequence "*n".
** - 9600 Baud. Selected by sequence "*q".
**
** Selecting a sample rate is no longer supported with the MouseMan!
** Some additional lines in xf86Config.c take care of ill configured
** baud rates and sample rates. (The user will get an error.)
*/
switch (rodent.rtype) {
case MOUSE_PROTO_LOGI:
/*
* The baud rate selection command must be sent at the current
* baud rate; try all likely settings
*/
setmousespeed(9600, rodent.baudrate, rodentcflags[rodent.rtype]);
setmousespeed(4800, rodent.baudrate, rodentcflags[rodent.rtype]);
setmousespeed(2400, rodent.baudrate, rodentcflags[rodent.rtype]);
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
/* select MM series data format */
write(rodent.mfd, "S", 1);
setmousespeed(rodent.baudrate, rodent.baudrate,
rodentcflags[MOUSE_PROTO_MM]);
/* select report rate/frequency */
if (rodent.rate <= 0) write(rodent.mfd, "O", 1);
else if (rodent.rate <= 15) write(rodent.mfd, "J", 1);
else if (rodent.rate <= 27) write(rodent.mfd, "K", 1);
else if (rodent.rate <= 42) write(rodent.mfd, "L", 1);
else if (rodent.rate <= 60) write(rodent.mfd, "R", 1);
else if (rodent.rate <= 85) write(rodent.mfd, "M", 1);
else if (rodent.rate <= 125) write(rodent.mfd, "Q", 1);
else write(rodent.mfd, "N", 1);
break;
case MOUSE_PROTO_LOGIMOUSEMAN:
/* The command must always be sent at 1200 baud */
setmousespeed(1200, 1200, rodentcflags[rodent.rtype]);
write(rodent.mfd, "*X", 2);
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
break;
case MOUSE_PROTO_HITTAB:
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
/*
* Initialize Hitachi PUMA Plus - Model 1212E to desired settings.
* The tablet must be configured to be in MM mode, NO parity,
* Binary Format. xf86Info.sampleRate controls the sensativity
* of the tablet. We only use this tablet for it's 4-button puck
* so we don't run in "Absolute Mode"
*/
write(rodent.mfd, "z8", 2); /* Set Parity = "NONE" */
usleep(50000);
write(rodent.mfd, "zb", 2); /* Set Format = "Binary" */
usleep(50000);
write(rodent.mfd, "@", 1); /* Set Report Mode = "Stream" */
usleep(50000);
write(rodent.mfd, "R", 1); /* Set Output Rate = "45 rps" */
usleep(50000);
write(rodent.mfd, "I\x20", 2); /* Set Incrememtal Mode "20" */
usleep(50000);
write(rodent.mfd, "E", 1); /* Set Data Type = "Relative */
usleep(50000);
/* Resolution is in 'lines per inch' on the Hitachi tablet */
if (rodent.resolution == MOUSE_RES_LOW) c = 'g';
else if (rodent.resolution == MOUSE_RES_MEDIUMLOW) c = 'e';
else if (rodent.resolution == MOUSE_RES_MEDIUMHIGH) c = 'h';
else if (rodent.resolution == MOUSE_RES_HIGH) c = 'd';
else if (rodent.resolution <= 40) c = 'g';
else if (rodent.resolution <= 100) c = 'd';
else if (rodent.resolution <= 200) c = 'e';
else if (rodent.resolution <= 500) c = 'h';
else if (rodent.resolution <= 1000) c = 'j';
else c = 'd';
write(rodent.mfd, &c, 1);
usleep(50000);
write(rodent.mfd, "\021", 1); /* Resume DATA output */
break;
case MOUSE_PROTO_THINK:
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
/* the PnP ID string may be sent again, discard it */
usleep(200000);
i = FREAD;
ioctl(rodent.mfd, TIOCFLUSH, &i);
/* send the command to initialize the beast */
for (s = "E5E5"; *s; ++s) {
write(rodent.mfd, s, 1);
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
if (select(FD_SETSIZE, &fds, NULL, NULL, NULL) <= 0)
break;
read(rodent.mfd, &c, 1);
debug("%c", c);
if (c != *s)
break;
}
break;
case MOUSE_PROTO_JOGDIAL:
break;
case MOUSE_PROTO_MSC:
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
if (rodent.flags & ClearDTR) {
i = TIOCM_DTR;
ioctl(rodent.mfd, TIOCMBIC, &i);
}
if (rodent.flags & ClearRTS) {
i = TIOCM_RTS;
ioctl(rodent.mfd, TIOCMBIC, &i);
}
break;
case MOUSE_PROTO_SYSMOUSE:
if (rodent.hw.iftype == MOUSE_IF_SYSMOUSE)
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
/* FALLTHROUGH */
case MOUSE_PROTO_BUS:
case MOUSE_PROTO_INPORT:
case MOUSE_PROTO_PS2:
if (rodent.rate >= 0)
rodent.mode.rate = rodent.rate;
if (rodent.resolution != MOUSE_RES_UNKNOWN)
rodent.mode.resolution = rodent.resolution;
ioctl(rodent.mfd, MOUSE_SETMODE, &rodent.mode);
break;
case MOUSE_PROTO_X10MOUSEREM:
mremote_serversetup();
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
break;
case MOUSE_PROTO_VERSAPAD:
tcsendbreak(rodent.mfd, 0); /* send break for 400 msec */
i = FREAD;
ioctl(rodent.mfd, TIOCFLUSH, &i);
for (i = 0; i < 7; ++i) {
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
if (select(FD_SETSIZE, &fds, NULL, NULL, NULL) <= 0)
break;
read(rodent.mfd, &c, 1);
buf[i] = c;
}
debug("%s\n", buf);
if ((buf[0] != 'V') || (buf[1] != 'P')|| (buf[7] != '\r'))
break;
setmousespeed(9600, rodent.baudrate, rodentcflags[rodent.rtype]);
tcsendbreak(rodent.mfd, 0); /* send break for 400 msec again */
for (i = 0; i < 7; ++i) {
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
if (select(FD_SETSIZE, &fds, NULL, NULL, NULL) <= 0)
break;
read(rodent.mfd, &c, 1);
debug("%c", c);
if (c != buf[i])
break;
}
i = FREAD;
ioctl(rodent.mfd, TIOCFLUSH, &i);
break;
default:
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
break;
}
}
static int
r_protocol(u_char rBuf, mousestatus_t *act)
{
/* MOUSE_MSS_BUTTON?DOWN -> MOUSE_BUTTON?DOWN */
static int butmapmss[4] = { /* Microsoft, MouseMan, GlidePoint,
IntelliMouse, Thinking Mouse */
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
};
static int butmapmss2[4] = { /* Microsoft, MouseMan, GlidePoint,
Thinking Mouse */
0,
MOUSE_BUTTON4DOWN,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON2DOWN | MOUSE_BUTTON4DOWN,
};
/* MOUSE_INTELLI_BUTTON?DOWN -> MOUSE_BUTTON?DOWN */
static int butmapintelli[4] = { /* IntelliMouse, NetMouse, Mie Mouse,
MouseMan+ */
0,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON4DOWN,
MOUSE_BUTTON2DOWN | MOUSE_BUTTON4DOWN,
};
/* MOUSE_MSC_BUTTON?UP -> MOUSE_BUTTON?DOWN */
static int butmapmsc[8] = { /* MouseSystems, MMSeries, Logitech,
Bus, sysmouse */
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
};
/* MOUSE_PS2_BUTTON?DOWN -> MOUSE_BUTTON?DOWN */
static int butmapps2[8] = { /* PS/2 */
0,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
};
/* for Hitachi tablet */
static int butmaphit[8] = { /* MM HitTablet */
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON4DOWN,
MOUSE_BUTTON5DOWN,
MOUSE_BUTTON6DOWN,
MOUSE_BUTTON7DOWN,
};
/* for serial VersaPad */
static int butmapversa[8] = { /* VersaPad */
0,
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
};
/* for PS/2 VersaPad */
static int butmapversaps2[8] = { /* VersaPad */
0,
MOUSE_BUTTON3DOWN,
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
};
static int pBufP = 0;
static unsigned char pBuf[8];
static int prev_x, prev_y;
static int on = FALSE;
int x, y;
debug("received char 0x%x",(int)rBuf);
if (rodent.rtype == MOUSE_PROTO_KIDSPAD)
return kidspad(rBuf, act) ;
if (rodent.rtype == MOUSE_PROTO_GTCO_DIGIPAD)
return gtco_digipad(rBuf, act);
/*
* Hack for resyncing: We check here for a package that is:
* a) illegal (detected by wrong data-package header)
* b) invalid (0x80 == -128 and that might be wrong for MouseSystems)
* c) bad header-package
*
* NOTE: b) is a voilation of the MouseSystems-Protocol, since values of
* -128 are allowed, but since they are very seldom we can easily
* use them as package-header with no button pressed.
* NOTE/2: On a PS/2 mouse any byte is valid as a data byte. Furthermore,
* 0x80 is not valid as a header byte. For a PS/2 mouse we skip
* checking data bytes.
* For resyncing a PS/2 mouse we require the two most significant
* bits in the header byte to be 0. These are the overflow bits,
* and in case of an overflow we actually lose sync. Overflows
* are very rare, however, and we quickly gain sync again after
* an overflow condition. This is the best we can do. (Actually,
* we could use bit 0x08 in the header byte for resyncing, since
* that bit is supposed to be always on, but nobody told
* Microsoft...)
*/
if (pBufP != 0 && rodent.rtype != MOUSE_PROTO_PS2 &&
((rBuf & cur_proto[2]) != cur_proto[3] || rBuf == 0x80))
{
pBufP = 0; /* skip package */
}
if (pBufP == 0 && (rBuf & cur_proto[0]) != cur_proto[1])
return 0;
/* is there an extra data byte? */
if (pBufP >= cur_proto[4] && (rBuf & cur_proto[0]) != cur_proto[1])
{
/*
* Hack for Logitech MouseMan Mouse - Middle button
*
* Unfortunately this mouse has variable length packets: the standard
* Microsoft 3 byte packet plus an optional 4th byte whenever the
* middle button status changes.
*
* We have already processed the standard packet with the movement
* and button info. Now post an event message with the old status
* of the left and right buttons and the updated middle button.
*/
/*
* Even worse, different MouseMen and TrackMen differ in the 4th
* byte: some will send 0x00/0x20, others 0x01/0x21, or even
* 0x02/0x22, so I have to strip off the lower bits.
*
* [JCH-96/01/21]
* HACK for ALPS "fourth button". (It's bit 0x10 of the "fourth byte"
* and it is activated by tapping the glidepad with the finger! 8^)
* We map it to bit bit3, and the reverse map in xf86Events just has
* to be extended so that it is identified as Button 4. The lower
* half of the reverse-map may remain unchanged.
*/
/*
* [KY-97/08/03]
* Receive the fourth byte only when preceding three bytes have
* been detected (pBufP >= cur_proto[4]). In the previous
* versions, the test was pBufP == 0; thus, we may have mistakingly
* received a byte even if we didn't see anything preceding
* the byte.
*/
if ((rBuf & cur_proto[5]) != cur_proto[6]) {
pBufP = 0;
return 0;
}
switch (rodent.rtype) {
#if notyet
case MOUSE_PROTO_MARIQUA:
/*
* This mouse has 16! buttons in addition to the standard
* three of them. They return 0x10 though 0x1f in the
* so-called `ten key' mode and 0x30 though 0x3f in the
* `function key' mode. As there are only 31 bits for
* button state (including the standard three), we ignore
* the bit 0x20 and don't distinguish the two modes.
*/
act->dx = act->dy = act->dz = 0;
act->obutton = act->button;
rBuf &= 0x1f;
act->button = (1 << (rBuf - 13))
| (act->obutton & (MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN));
/*
* FIXME: this is a button "down" event. There needs to be
* a corresponding button "up" event... XXX
*/
break;
#endif /* notyet */
case MOUSE_PROTO_JOGDIAL:
break;
/*
* IntelliMouse, NetMouse (including NetMouse Pro) and Mie Mouse
* always send the fourth byte, whereas the fourth byte is
* optional for GlidePoint and ThinkingMouse. The fourth byte
* is also optional for MouseMan+ and FirstMouse+ in their
* native mode. It is always sent if they are in the IntelliMouse
* compatible mode.
*/
case MOUSE_PROTO_INTELLI: /* IntelliMouse, NetMouse, Mie Mouse,
MouseMan+ */
act->dx = act->dy = 0;
act->dz = (rBuf & 0x08) ? (rBuf & 0x0f) - 16 : (rBuf & 0x0f);
if ((act->dz >= 7) || (act->dz <= -7))
act->dz = 0;
act->obutton = act->button;
act->button = butmapintelli[(rBuf & MOUSE_MSS_BUTTONS) >> 4]
| (act->obutton & (MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN));
break;
default:
act->dx = act->dy = act->dz = 0;
act->obutton = act->button;
act->button = butmapmss2[(rBuf & MOUSE_MSS_BUTTONS) >> 4]
| (act->obutton & (MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN));
break;
}
act->flags = ((act->dx || act->dy || act->dz) ? MOUSE_POSCHANGED : 0)
| (act->obutton ^ act->button);
pBufP = 0;
return act->flags;
}
if (pBufP >= cur_proto[4])
pBufP = 0;
pBuf[pBufP++] = rBuf;
if (pBufP != cur_proto[4])
return 0;
/*
* assembly full package
*/
debug("assembled full packet (len %d) %x,%x,%x,%x,%x,%x,%x,%x",
cur_proto[4],
pBuf[0], pBuf[1], pBuf[2], pBuf[3],
pBuf[4], pBuf[5], pBuf[6], pBuf[7]);
act->dz = 0;
act->obutton = act->button;
switch (rodent.rtype)
{
case MOUSE_PROTO_MS: /* Microsoft */
case MOUSE_PROTO_LOGIMOUSEMAN: /* MouseMan/TrackMan */
case MOUSE_PROTO_X10MOUSEREM: /* X10 MouseRemote */
act->button = act->obutton & MOUSE_BUTTON4DOWN;
if (rodent.flags & ChordMiddle)
act->button |= ((pBuf[0] & MOUSE_MSS_BUTTONS) == MOUSE_MSS_BUTTONS)
? MOUSE_BUTTON2DOWN
: butmapmss[(pBuf[0] & MOUSE_MSS_BUTTONS) >> 4];
else
act->button |= (act->obutton & MOUSE_BUTTON2DOWN)
| butmapmss[(pBuf[0] & MOUSE_MSS_BUTTONS) >> 4];
/* Send X10 btn events to remote client (ensure -128-+127 range) */
if ((rodent.rtype == MOUSE_PROTO_X10MOUSEREM) &&
((pBuf[0] & 0xFC) == 0x44) && (pBuf[2] == 0x3F)) {
if (rodent.mremcfd >= 0) {
unsigned char key = (signed char)(((pBuf[0] & 0x03) << 6) |
(pBuf[1] & 0x3F));
write(rodent.mremcfd, &key, 1);
}
return 0;
}
act->dx = (signed char)(((pBuf[0] & 0x03) << 6) | (pBuf[1] & 0x3F));
act->dy = (signed char)(((pBuf[0] & 0x0C) << 4) | (pBuf[2] & 0x3F));
break;
case MOUSE_PROTO_GLIDEPOINT: /* GlidePoint */
case MOUSE_PROTO_THINK: /* ThinkingMouse */
case MOUSE_PROTO_INTELLI: /* IntelliMouse, NetMouse, Mie Mouse,
MouseMan+ */
act->button = (act->obutton & (MOUSE_BUTTON2DOWN | MOUSE_BUTTON4DOWN))
| butmapmss[(pBuf[0] & MOUSE_MSS_BUTTONS) >> 4];
act->dx = (signed char)(((pBuf[0] & 0x03) << 6) | (pBuf[1] & 0x3F));
act->dy = (signed char)(((pBuf[0] & 0x0C) << 4) | (pBuf[2] & 0x3F));
break;
case MOUSE_PROTO_MSC: /* MouseSystems Corp */
#if notyet
case MOUSE_PROTO_MARIQUA: /* Mariqua */
#endif
act->button = butmapmsc[(~pBuf[0]) & MOUSE_MSC_BUTTONS];
act->dx = (signed char)(pBuf[1]) + (signed char)(pBuf[3]);
act->dy = - ((signed char)(pBuf[2]) + (signed char)(pBuf[4]));
break;
case MOUSE_PROTO_JOGDIAL: /* JogDial */
if (rBuf == 0x6c)
act->dz = -1;
if (rBuf == 0x72)
act->dz = 1;
if (rBuf == 0x64)
act->button = MOUSE_BUTTON1DOWN;
if (rBuf == 0x75)
act->button = 0;
break;
case MOUSE_PROTO_HITTAB: /* MM HitTablet */
act->button = butmaphit[pBuf[0] & 0x07];
act->dx = (pBuf[0] & MOUSE_MM_XPOSITIVE) ? pBuf[1] : - pBuf[1];
act->dy = (pBuf[0] & MOUSE_MM_YPOSITIVE) ? - pBuf[2] : pBuf[2];
break;
case MOUSE_PROTO_MM: /* MM Series */
case MOUSE_PROTO_LOGI: /* Logitech Mice */
act->button = butmapmsc[pBuf[0] & MOUSE_MSC_BUTTONS];
act->dx = (pBuf[0] & MOUSE_MM_XPOSITIVE) ? pBuf[1] : - pBuf[1];
act->dy = (pBuf[0] & MOUSE_MM_YPOSITIVE) ? - pBuf[2] : pBuf[2];
break;
case MOUSE_PROTO_VERSAPAD: /* VersaPad */
act->button = butmapversa[(pBuf[0] & MOUSE_VERSA_BUTTONS) >> 3];
act->button |= (pBuf[0] & MOUSE_VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0;
act->dx = act->dy = 0;
if (!(pBuf[0] & MOUSE_VERSA_IN_USE)) {
on = FALSE;
break;
}
x = (pBuf[2] << 6) | pBuf[1];
if (x & 0x800)
x -= 0x1000;
y = (pBuf[4] << 6) | pBuf[3];
if (y & 0x800)
y -= 0x1000;
if (on) {
act->dx = prev_x - x;
act->dy = prev_y - y;
} else {
on = TRUE;
}
prev_x = x;
prev_y = y;
break;
case MOUSE_PROTO_BUS: /* Bus */
case MOUSE_PROTO_INPORT: /* InPort */
act->button = butmapmsc[(~pBuf[0]) & MOUSE_MSC_BUTTONS];
act->dx = (signed char)pBuf[1];
act->dy = - (signed char)pBuf[2];
break;
case MOUSE_PROTO_PS2: /* PS/2 */
act->button = butmapps2[pBuf[0] & MOUSE_PS2_BUTTONS];
act->dx = (pBuf[0] & MOUSE_PS2_XNEG) ? pBuf[1] - 256 : pBuf[1];
act->dy = (pBuf[0] & MOUSE_PS2_YNEG) ? -(pBuf[2] - 256) : -pBuf[2];
/*
* Moused usually operates the psm driver at the operation level 1
* which sends mouse data in MOUSE_PROTO_SYSMOUSE protocol.
* The following code takes effect only when the user explicitly
* requets the level 2 at which wheel movement and additional button
* actions are encoded in model-dependent formats. At the level 0
* the following code is no-op because the psm driver says the model
* is MOUSE_MODEL_GENERIC.
*/
switch (rodent.hw.model) {
case MOUSE_MODEL_EXPLORER:
/* wheel and additional button data is in the fourth byte */
act->dz = (pBuf[3] & MOUSE_EXPLORER_ZNEG)
? (pBuf[3] & 0x0f) - 16 : (pBuf[3] & 0x0f);
act->button |= (pBuf[3] & MOUSE_EXPLORER_BUTTON4DOWN)
? MOUSE_BUTTON4DOWN : 0;
act->button |= (pBuf[3] & MOUSE_EXPLORER_BUTTON5DOWN)
? MOUSE_BUTTON5DOWN : 0;
break;
case MOUSE_MODEL_INTELLI:
case MOUSE_MODEL_NET:
/* wheel data is in the fourth byte */
act->dz = (signed char)pBuf[3];
if ((act->dz >= 7) || (act->dz <= -7))
act->dz = 0;
/* some compatible mice may have additional buttons */
act->button |= (pBuf[0] & MOUSE_PS2INTELLI_BUTTON4DOWN)
? MOUSE_BUTTON4DOWN : 0;
act->button |= (pBuf[0] & MOUSE_PS2INTELLI_BUTTON5DOWN)
? MOUSE_BUTTON5DOWN : 0;
break;
case MOUSE_MODEL_MOUSEMANPLUS:
if (((pBuf[0] & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC)
&& (abs(act->dx) > 191)
&& MOUSE_PS2PLUS_CHECKBITS(pBuf)) {
/* the extended data packet encodes button and wheel events */
switch (MOUSE_PS2PLUS_PACKET_TYPE(pBuf)) {
case 1:
/* wheel data packet */
act->dx = act->dy = 0;
if (pBuf[2] & 0x80) {
/* horizontal roller count - ignore it XXX*/
} else {
/* vertical roller count */
act->dz = (pBuf[2] & MOUSE_PS2PLUS_ZNEG)
? (pBuf[2] & 0x0f) - 16 : (pBuf[2] & 0x0f);
}
act->button |= (pBuf[2] & MOUSE_PS2PLUS_BUTTON4DOWN)
? MOUSE_BUTTON4DOWN : 0;
act->button |= (pBuf[2] & MOUSE_PS2PLUS_BUTTON5DOWN)
? MOUSE_BUTTON5DOWN : 0;
break;
case 2:
/* this packet type is reserved by Logitech */
/*
* IBM ScrollPoint Mouse uses this packet type to
* encode both vertical and horizontal scroll movement.
*/
act->dx = act->dy = 0;
/* horizontal roller count */
if (pBuf[2] & 0x0f)
act->dz = (pBuf[2] & MOUSE_SPOINT_WNEG) ? -2 : 2;
/* vertical roller count */
if (pBuf[2] & 0xf0)
act->dz = (pBuf[2] & MOUSE_SPOINT_ZNEG) ? -1 : 1;
#if 0
/* vertical roller count */
act->dz = (pBuf[2] & MOUSE_SPOINT_ZNEG)
? ((pBuf[2] >> 4) & 0x0f) - 16
: ((pBuf[2] >> 4) & 0x0f);
/* horizontal roller count */
act->dw = (pBuf[2] & MOUSE_SPOINT_WNEG)
? (pBuf[2] & 0x0f) - 16 : (pBuf[2] & 0x0f);
#endif
break;
case 0:
/* device type packet - shouldn't happen */
/* FALLTHROUGH */
default:
act->dx = act->dy = 0;
act->button = act->obutton;
debug("unknown PS2++ packet type %d: 0x%02x 0x%02x 0x%02x\n",
MOUSE_PS2PLUS_PACKET_TYPE(pBuf),
pBuf[0], pBuf[1], pBuf[2]);
break;
}
} else {
/* preserve button states */
act->button |= act->obutton & MOUSE_EXTBUTTONS;
}
break;
case MOUSE_MODEL_GLIDEPOINT:
/* `tapping' action */
act->button |= ((pBuf[0] & MOUSE_PS2_TAP)) ? 0 : MOUSE_BUTTON4DOWN;
break;
case MOUSE_MODEL_NETSCROLL:
/* three addtional bytes encode buttons and wheel events */
act->button |= (pBuf[3] & MOUSE_PS2_BUTTON3DOWN)
? MOUSE_BUTTON4DOWN : 0;
act->button |= (pBuf[3] & MOUSE_PS2_BUTTON1DOWN)
? MOUSE_BUTTON5DOWN : 0;
act->dz = (pBuf[3] & MOUSE_PS2_XNEG) ? pBuf[4] - 256 : pBuf[4];
break;
case MOUSE_MODEL_THINK:
/* the fourth button state in the first byte */
act->button |= (pBuf[0] & MOUSE_PS2_TAP) ? MOUSE_BUTTON4DOWN : 0;
break;
case MOUSE_MODEL_VERSAPAD:
act->button = butmapversaps2[pBuf[0] & MOUSE_PS2VERSA_BUTTONS];
act->button |=
(pBuf[0] & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0;
act->dx = act->dy = 0;
if (!(pBuf[0] & MOUSE_PS2VERSA_IN_USE)) {
on = FALSE;
break;
}
x = ((pBuf[4] << 8) & 0xf00) | pBuf[1];
if (x & 0x800)
x -= 0x1000;
y = ((pBuf[4] << 4) & 0xf00) | pBuf[2];
if (y & 0x800)
y -= 0x1000;
if (on) {
act->dx = prev_x - x;
act->dy = prev_y - y;
} else {
on = TRUE;
}
prev_x = x;
prev_y = y;
break;
case MOUSE_MODEL_4D:
act->dx = (pBuf[1] & 0x80) ? pBuf[1] - 256 : pBuf[1];
act->dy = (pBuf[2] & 0x80) ? -(pBuf[2] - 256) : -pBuf[2];
switch (pBuf[0] & MOUSE_4D_WHEELBITS) {
case 0x10:
act->dz = 1;
break;
case 0x30:
act->dz = -1;
break;
case 0x40: /* 2nd wheel rolling right XXX */
act->dz = 2;
break;
case 0xc0: /* 2nd wheel rolling left XXX */
act->dz = -2;
break;
}
break;
case MOUSE_MODEL_4DPLUS:
if ((act->dx < 16 - 256) && (act->dy > 256 - 16)) {
act->dx = act->dy = 0;
if (pBuf[2] & MOUSE_4DPLUS_BUTTON4DOWN)
act->button |= MOUSE_BUTTON4DOWN;
act->dz = (pBuf[2] & MOUSE_4DPLUS_ZNEG)
? ((pBuf[2] & 0x07) - 8) : (pBuf[2] & 0x07);
} else {
/* preserve previous button states */
act->button |= act->obutton & MOUSE_EXTBUTTONS;
}
break;
case MOUSE_MODEL_GENERIC:
default:
break;
}
break;
case MOUSE_PROTO_SYSMOUSE: /* sysmouse */
act->button = butmapmsc[(~pBuf[0]) & MOUSE_SYS_STDBUTTONS];
act->dx = (signed char)(pBuf[1]) + (signed char)(pBuf[3]);
act->dy = - ((signed char)(pBuf[2]) + (signed char)(pBuf[4]));
if (rodent.level == 1) {
act->dz = ((signed char)(pBuf[5] << 1) + (signed char)(pBuf[6] << 1)) >> 1;
act->button |= ((~pBuf[7] & MOUSE_SYS_EXTBUTTONS) << 3);
}
break;
default:
return 0;
}
/*
* We don't reset pBufP here yet, as there may be an additional data
* byte in some protocols. See above.
*/
/* has something changed? */
act->flags = ((act->dx || act->dy || act->dz) ? MOUSE_POSCHANGED : 0)
| (act->obutton ^ act->button);
return act->flags;
}
static int
r_statetrans(mousestatus_t *a1, mousestatus_t *a2, int trans)
{
int changed;
int flags;
a2->dx = a1->dx;
a2->dy = a1->dy;
a2->dz = a1->dz;
a2->obutton = a2->button;
a2->button = a1->button;
a2->flags = a1->flags;
changed = FALSE;
if (rodent.flags & Emulate3Button) {
if (debug > 2)
debug("state:%d, trans:%d -> state:%d",
mouse_button_state, trans,
states[mouse_button_state].s[trans]);
/*
* Avoid re-ordering button and movement events. While a button
* event is deferred, throw away up to BUTTON2_MAXMOVE movement
* events to allow for mouse jitter. If more movement events
* occur, then complete the deferred button events immediately.
*/
if ((a2->dx != 0 || a2->dy != 0) &&
S_DELAYED(states[mouse_button_state].s[trans])) {
if (++mouse_move_delayed > BUTTON2_MAXMOVE) {
mouse_move_delayed = 0;
mouse_button_state =
states[mouse_button_state].s[A_TIMEOUT];
changed = TRUE;
} else
a2->dx = a2->dy = 0;
} else
mouse_move_delayed = 0;
if (mouse_button_state != states[mouse_button_state].s[trans])
changed = TRUE;
if (changed)
gettimeofday(&mouse_button_state_tv, NULL);
mouse_button_state = states[mouse_button_state].s[trans];
a2->button &=
~(MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN);
a2->button &= states[mouse_button_state].mask;
a2->button |= states[mouse_button_state].buttons;
flags = a2->flags & MOUSE_POSCHANGED;
flags |= a2->obutton ^ a2->button;
if (flags & MOUSE_BUTTON2DOWN) {
a2->flags = flags & MOUSE_BUTTON2DOWN;
r_timestamp(a2);
}
a2->flags = flags;
}
return changed;
}
/* phisical to logical button mapping */
static int p2l[MOUSE_MAXBUTTON] = {
MOUSE_BUTTON1DOWN, MOUSE_BUTTON2DOWN, MOUSE_BUTTON3DOWN, MOUSE_BUTTON4DOWN,
MOUSE_BUTTON5DOWN, MOUSE_BUTTON6DOWN, MOUSE_BUTTON7DOWN, MOUSE_BUTTON8DOWN,
0x00000100, 0x00000200, 0x00000400, 0x00000800,
0x00001000, 0x00002000, 0x00004000, 0x00008000,
0x00010000, 0x00020000, 0x00040000, 0x00080000,
0x00100000, 0x00200000, 0x00400000, 0x00800000,
0x01000000, 0x02000000, 0x04000000, 0x08000000,
0x10000000, 0x20000000, 0x40000000,
};
static char *
skipspace(char *s)
{
while(isspace(*s))
++s;
return s;
}
static int
r_installmap(char *arg)
{
int pbutton;
int lbutton;
char *s;
while (*arg) {
arg = skipspace(arg);
s = arg;
while (isdigit(*arg))
++arg;
arg = skipspace(arg);
if ((arg <= s) || (*arg != '='))
return FALSE;
lbutton = atoi(s);
arg = skipspace(++arg);
s = arg;
while (isdigit(*arg))
++arg;
if ((arg <= s) || (!isspace(*arg) && (*arg != '\0')))
return FALSE;
pbutton = atoi(s);
if ((lbutton <= 0) || (lbutton > MOUSE_MAXBUTTON))
return FALSE;
if ((pbutton <= 0) || (pbutton > MOUSE_MAXBUTTON))
return FALSE;
p2l[pbutton - 1] = 1 << (lbutton - 1);
mstate[lbutton - 1] = &bstate[pbutton - 1];
}
return TRUE;
}
static void
r_map(mousestatus_t *act1, mousestatus_t *act2)
{
register int pb;
register int pbuttons;
int lbuttons;
pbuttons = act1->button;
lbuttons = 0;
act2->obutton = act2->button;
if (pbuttons & rodent.wmode) {
pbuttons &= ~rodent.wmode;
act1->dz = act1->dy;
act1->dx = 0;
act1->dy = 0;
}
act2->dx = act1->dx;
act2->dy = act1->dy;
act2->dz = act1->dz;
switch (rodent.zmap[0]) {
case 0: /* do nothing */
break;
case MOUSE_XAXIS:
if (act1->dz != 0) {
act2->dx = act1->dz;
act2->dz = 0;
}
break;
case MOUSE_YAXIS:
if (act1->dz != 0) {
act2->dy = act1->dz;
act2->dz = 0;
}
break;
default: /* buttons */
pbuttons &= ~(rodent.zmap[0] | rodent.zmap[1]
| rodent.zmap[2] | rodent.zmap[3]);
if ((act1->dz < -1) && rodent.zmap[2]) {
pbuttons |= rodent.zmap[2];
zstate[2].count = 1;
} else if (act1->dz < 0) {
pbuttons |= rodent.zmap[0];
zstate[0].count = 1;
} else if ((act1->dz > 1) && rodent.zmap[3]) {
pbuttons |= rodent.zmap[3];
zstate[3].count = 1;
} else if (act1->dz > 0) {
pbuttons |= rodent.zmap[1];
zstate[1].count = 1;
}
act2->dz = 0;
break;
}
for (pb = 0; (pb < MOUSE_MAXBUTTON) && (pbuttons != 0); ++pb) {
lbuttons |= (pbuttons & 1) ? p2l[pb] : 0;
pbuttons >>= 1;
}
act2->button = lbuttons;
act2->flags = ((act2->dx || act2->dy || act2->dz) ? MOUSE_POSCHANGED : 0)
| (act2->obutton ^ act2->button);
}
static void
r_timestamp(mousestatus_t *act)
{
struct timeval tv;
struct timeval tv1;
struct timeval tv2;
struct timeval tv3;
int button;
int mask;
int i;
mask = act->flags & MOUSE_BUTTONS;
#if 0
if (mask == 0)
return;
#endif
gettimeofday(&tv1, NULL);
/* double click threshold */
tv2.tv_sec = rodent.clickthreshold/1000;
tv2.tv_usec = (rodent.clickthreshold%1000)*1000;
timersub(&tv1, &tv2, &tv);
debug("tv: %ld %ld", tv.tv_sec, tv.tv_usec);
/* 3 button emulation timeout */
tv2.tv_sec = rodent.button2timeout/1000;
tv2.tv_usec = (rodent.button2timeout%1000)*1000;
timersub(&tv1, &tv2, &tv3);
button = MOUSE_BUTTON1DOWN;
for (i = 0; (i < MOUSE_MAXBUTTON) && (mask != 0); ++i) {
if (mask & 1) {
if (act->button & button) {
/* the button is down */
debug(" : %ld %ld",
bstate[i].tv.tv_sec, bstate[i].tv.tv_usec);
if (timercmp(&tv, &bstate[i].tv, >)) {
bstate[i].count = 1;
} else {
++bstate[i].count;
}
bstate[i].tv = tv1;
} else {
/* the button is up */
bstate[i].tv = tv1;
}
} else {
if (act->button & button) {
/* the button has been down */
if (timercmp(&tv3, &bstate[i].tv, >)) {
bstate[i].count = 1;
bstate[i].tv = tv1;
act->flags |= button;
debug("button %d timeout", i + 1);
}
} else {
/* the button has been up */
}
}
button <<= 1;
mask >>= 1;
}
}
static int
r_timeout(void)
{
struct timeval tv;
struct timeval tv1;
struct timeval tv2;
if (states[mouse_button_state].timeout)
return TRUE;
gettimeofday(&tv1, NULL);
tv2.tv_sec = rodent.button2timeout/1000;
tv2.tv_usec = (rodent.button2timeout%1000)*1000;
timersub(&tv1, &tv2, &tv);
return timercmp(&tv, &mouse_button_state_tv, >);
}
static void
r_click(mousestatus_t *act)
{
struct mouse_info mouse;
int button;
int mask;
int i;
mask = act->flags & MOUSE_BUTTONS;
if (mask == 0)
return;
button = MOUSE_BUTTON1DOWN;
for (i = 0; (i < MOUSE_MAXBUTTON) && (mask != 0); ++i) {
if (mask & 1) {
debug("mstate[%d]->count:%d", i, mstate[i]->count);
if (act->button & button) {
/* the button is down */
mouse.u.event.value = mstate[i]->count;
} else {
/* the button is up */
mouse.u.event.value = 0;
}
mouse.operation = MOUSE_BUTTON_EVENT;
mouse.u.event.id = button;
if (debug < 2)
ioctl(rodent.cfd, CONS_MOUSECTL, &mouse);
debug("button %d count %d", i + 1, mouse.u.event.value);
}
button <<= 1;
mask >>= 1;
}
}
/* $XConsortium: posix_tty.c,v 1.3 95/01/05 20:42:55 kaleb Exp $ */
/* $XFree86: xc/programs/Xserver/hw/xfree86/os-support/shared/posix_tty.c,v 3.4 1995/01/28 17:05:03 dawes Exp $ */
/*
* Copyright 1993 by David Dawes <dawes@physics.su.oz.au>
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that
* copyright notice and this permission notice appear in supporting
* documentation, and that the name of David Dawes
* not be used in advertising or publicity pertaining to distribution of
* the software without specific, written prior permission.
* David Dawes makes no representations about the suitability of this
* software for any purpose. It is provided "as is" without express or
* implied warranty.
*
* DAVID DAWES DISCLAIMS ALL WARRANTIES WITH REGARD TO
* THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS, IN NO EVENT SHALL DAVID DAWES BE LIABLE FOR
* ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
* RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
* CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
static void
setmousespeed(int old, int new, unsigned cflag)
{
struct termios tty;
char *c;
if (tcgetattr(rodent.mfd, &tty) < 0)
{
logwarn("unable to get status of mouse fd");
return;
}
tty.c_iflag = IGNBRK | IGNPAR;
tty.c_oflag = 0;
tty.c_lflag = 0;
tty.c_cflag = (tcflag_t)cflag;
tty.c_cc[VTIME] = 0;
tty.c_cc[VMIN] = 1;
switch (old)
{
case 9600:
cfsetispeed(&tty, B9600);
cfsetospeed(&tty, B9600);
break;
case 4800:
cfsetispeed(&tty, B4800);
cfsetospeed(&tty, B4800);
break;
case 2400:
cfsetispeed(&tty, B2400);
cfsetospeed(&tty, B2400);
break;
case 1200:
default:
cfsetispeed(&tty, B1200);
cfsetospeed(&tty, B1200);
}
if (tcsetattr(rodent.mfd, TCSADRAIN, &tty) < 0)
{
logwarn("unable to set status of mouse fd");
return;
}
switch (new)
{
case 9600:
c = "*q";
cfsetispeed(&tty, B9600);
cfsetospeed(&tty, B9600);
break;
case 4800:
c = "*p";
cfsetispeed(&tty, B4800);
cfsetospeed(&tty, B4800);
break;
case 2400:
c = "*o";
cfsetispeed(&tty, B2400);
cfsetospeed(&tty, B2400);
break;
case 1200:
default:
c = "*n";
cfsetispeed(&tty, B1200);
cfsetospeed(&tty, B1200);
}
if (rodent.rtype == MOUSE_PROTO_LOGIMOUSEMAN
|| rodent.rtype == MOUSE_PROTO_LOGI)
{
if (write(rodent.mfd, c, 2) != 2)
{
logwarn("unable to write to mouse fd");
return;
}
}
usleep(100000);
if (tcsetattr(rodent.mfd, TCSADRAIN, &tty) < 0)
logwarn("unable to set status of mouse fd");
}
/*
* PnP COM device support
*
* It's a simplistic implementation, but it works :-)
* KY, 31/7/97.
*/
/*
* Try to elicit a PnP ID as described in
* Microsoft, Hayes: "Plug and Play External COM Device Specification,
* rev 1.00", 1995.
*
* The routine does not fully implement the COM Enumerator as par Section
* 2.1 of the document. In particular, we don't have idle state in which
* the driver software monitors the com port for dynamic connection or
* removal of a device at the port, because `moused' simply quits if no
* device is found.
*
* In addition, as PnP COM device enumeration procedure slightly has
* changed since its first publication, devices which follow earlier
* revisions of the above spec. may fail to respond if the rev 1.0
* procedure is used. XXX
*/
static int
pnpwakeup1(void)
{
struct timeval timeout;
fd_set fds;
int i;
/*
* This is the procedure described in rev 1.0 of PnP COM device spec.
* Unfortunately, some devices which comform to earlier revisions of
* the spec gets confused and do not return the ID string...
*/
debug("PnP COM device rev 1.0 probe...");
/* port initialization (2.1.2) */
ioctl(rodent.mfd, TIOCMGET, &i);
i |= TIOCM_DTR; /* DTR = 1 */
i &= ~TIOCM_RTS; /* RTS = 0 */
ioctl(rodent.mfd, TIOCMSET, &i);
usleep(240000);
/*
* The PnP COM device spec. dictates that the mouse must set DSR
* in response to DTR (by hardware or by software) and that if DSR is
* not asserted, the host computer should think that there is no device
* at this serial port. But some mice just don't do that...
*/
ioctl(rodent.mfd, TIOCMGET, &i);
debug("modem status 0%o", i);
if ((i & TIOCM_DSR) == 0)
return FALSE;
/* port setup, 1st phase (2.1.3) */
setmousespeed(1200, 1200, (CS7 | CREAD | CLOCAL | HUPCL));
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 0, RTS = 0 */
ioctl(rodent.mfd, TIOCMBIC, &i);
usleep(240000);
i = TIOCM_DTR; /* DTR = 1, RTS = 0 */
ioctl(rodent.mfd, TIOCMBIS, &i);
usleep(240000);
/* wait for response, 1st phase (2.1.4) */
i = FREAD;
ioctl(rodent.mfd, TIOCFLUSH, &i);
i = TIOCM_RTS; /* DTR = 1, RTS = 1 */
ioctl(rodent.mfd, TIOCMBIS, &i);
/* try to read something */
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
timeout.tv_sec = 0;
timeout.tv_usec = 240000;
if (select(FD_SETSIZE, &fds, NULL, NULL, &timeout) > 0) {
debug("pnpwakeup1(): valid response in first phase.");
return TRUE;
}
/* port setup, 2nd phase (2.1.5) */
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 0, RTS = 0 */
ioctl(rodent.mfd, TIOCMBIC, &i);
usleep(240000);
/* wait for respose, 2nd phase (2.1.6) */
i = FREAD;
ioctl(rodent.mfd, TIOCFLUSH, &i);
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 1, RTS = 1 */
ioctl(rodent.mfd, TIOCMBIS, &i);
/* try to read something */
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
timeout.tv_sec = 0;
timeout.tv_usec = 240000;
if (select(FD_SETSIZE, &fds, NULL, NULL, &timeout) > 0) {
debug("pnpwakeup1(): valid response in second phase.");
return TRUE;
}
return FALSE;
}
static int
pnpwakeup2(void)
{
struct timeval timeout;
fd_set fds;
int i;
/*
* This is a simplified procedure; it simply toggles RTS.
*/
debug("alternate probe...");
ioctl(rodent.mfd, TIOCMGET, &i);
i |= TIOCM_DTR; /* DTR = 1 */
i &= ~TIOCM_RTS; /* RTS = 0 */
ioctl(rodent.mfd, TIOCMSET, &i);
usleep(240000);
setmousespeed(1200, 1200, (CS7 | CREAD | CLOCAL | HUPCL));
/* wait for respose */
i = FREAD;
ioctl(rodent.mfd, TIOCFLUSH, &i);
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 1, RTS = 1 */
ioctl(rodent.mfd, TIOCMBIS, &i);
/* try to read something */
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
timeout.tv_sec = 0;
timeout.tv_usec = 240000;
if (select(FD_SETSIZE, &fds, NULL, NULL, &timeout) > 0) {
debug("pnpwakeup2(): valid response.");
return TRUE;
}
return FALSE;
}
static int
pnpgets(char *buf)
{
struct timeval timeout;
fd_set fds;
int begin;
int i;
char c;
if (!pnpwakeup1() && !pnpwakeup2()) {
/*
* According to PnP spec, we should set DTR = 1 and RTS = 0 while
* in idle state. But, `moused' shall set DTR = RTS = 1 and proceed,
* assuming there is something at the port even if it didn't
* respond to the PnP enumeration procedure.
*/
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 1, RTS = 1 */
ioctl(rodent.mfd, TIOCMBIS, &i);
return 0;
}
/* collect PnP COM device ID (2.1.7) */
begin = -1;
i = 0;
usleep(240000); /* the mouse must send `Begin ID' within 200msec */
while (read(rodent.mfd, &c, 1) == 1) {
/* we may see "M", or "M3..." before `Begin ID' */
buf[i++] = c;
if ((c == 0x08) || (c == 0x28)) { /* Begin ID */
debug("begin-id %02x", c);
begin = i - 1;
break;
}
debug("%c %02x", c, c);
if (i >= 256)
break;
}
if (begin < 0) {
/* we haven't seen `Begin ID' in time... */
goto connect_idle;
}
++c; /* make it `End ID' */
for (;;) {
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
timeout.tv_sec = 0;
timeout.tv_usec = 240000;
if (select(FD_SETSIZE, &fds, NULL, NULL, &timeout) <= 0)
break;
read(rodent.mfd, &buf[i], 1);
if (buf[i++] == c) /* End ID */
break;
if (i >= 256)
break;
}
if (begin > 0) {
i -= begin;
bcopy(&buf[begin], &buf[0], i);
}
/* string may not be human readable... */
debug("len:%d, '%-*.*s'", i, i, i, buf);
if (buf[i - 1] == c)
return i; /* a valid PnP string */
/*
* According to PnP spec, we should set DTR = 1 and RTS = 0 while
* in idle state. But, `moused' shall leave the modem control lines
* as they are. See above.
*/
connect_idle:
/* we may still have something in the buffer */
return ((i > 0) ? i : 0);
}
static int
pnpparse(pnpid_t *id, char *buf, int len)
{
char s[3];
int offset;
int sum = 0;
int i, j;
id->revision = 0;
id->eisaid = NULL;
id->serial = NULL;
id->class = NULL;
id->compat = NULL;
id->description = NULL;
id->neisaid = 0;
id->nserial = 0;
id->nclass = 0;
id->ncompat = 0;
id->ndescription = 0;
if ((buf[0] != 0x28) && (buf[0] != 0x08)) {
/* non-PnP mice */
switch(buf[0]) {
default:
return FALSE;
case 'M': /* Microsoft */
id->eisaid = "PNP0F01";
break;
case 'H': /* MouseSystems */
id->eisaid = "PNP0F04";
break;
}
id->neisaid = strlen(id->eisaid);
id->class = "MOUSE";
id->nclass = strlen(id->class);
debug("non-PnP mouse '%c'", buf[0]);
return TRUE;
}
/* PnP mice */
offset = 0x28 - buf[0];
/* calculate checksum */
for (i = 0; i < len - 3; ++i) {
sum += buf[i];
buf[i] += offset;
}
sum += buf[len - 1];
for (; i < len; ++i)
buf[i] += offset;
debug("PnP ID string: '%*.*s'", len, len, buf);
/* revision */
buf[1] -= offset;
buf[2] -= offset;
id->revision = ((buf[1] & 0x3f) << 6) | (buf[2] & 0x3f);
debug("PnP rev %d.%02d", id->revision / 100, id->revision % 100);
/* EISA vender and product ID */
id->eisaid = &buf[3];
id->neisaid = 7;
/* option strings */
i = 10;
if (buf[i] == '\\') {
/* device serial # */
for (j = ++i; i < len; ++i) {
if (buf[i] == '\\')
break;
}
if (i >= len)
i -= 3;
if (i - j == 8) {
id->serial = &buf[j];
id->nserial = 8;
}
}
if (buf[i] == '\\') {
/* PnP class */
for (j = ++i; i < len; ++i) {
if (buf[i] == '\\')
break;
}
if (i >= len)
i -= 3;
if (i > j + 1) {
id->class = &buf[j];
id->nclass = i - j;
}
}
if (buf[i] == '\\') {
/* compatible driver */
for (j = ++i; i < len; ++i) {
if (buf[i] == '\\')
break;
}
/*
* PnP COM spec prior to v0.96 allowed '*' in this field,
* it's not allowed now; just igore it.
*/
if (buf[j] == '*')
++j;
if (i >= len)
i -= 3;
if (i > j + 1) {
id->compat = &buf[j];
id->ncompat = i - j;
}
}
if (buf[i] == '\\') {
/* product description */
for (j = ++i; i < len; ++i) {
if (buf[i] == ';')
break;
}
if (i >= len)
i -= 3;
if (i > j + 1) {
id->description = &buf[j];
id->ndescription = i - j;
}
}
/* checksum exists if there are any optional fields */
if ((id->nserial > 0) || (id->nclass > 0)
|| (id->ncompat > 0) || (id->ndescription > 0)) {
debug("PnP checksum: 0x%X", sum);
sprintf(s, "%02X", sum & 0x0ff);
if (strncmp(s, &buf[len - 3], 2) != 0) {
#if 0
/*
* I found some mice do not comply with the PnP COM device
* spec regarding checksum... XXX
*/
logwarnx("PnP checksum error", 0);
return FALSE;
#endif
}
}
return TRUE;
}
static symtab_t *
pnpproto(pnpid_t *id)
{
symtab_t *t;
int i, j;
if (id->nclass > 0)
if (strncmp(id->class, "MOUSE", id->nclass) != 0 &&
strncmp(id->class, "TABLET", id->nclass) != 0)
/* this is not a mouse! */
return NULL;
if (id->neisaid > 0) {
t = gettoken(pnpprod, id->eisaid, id->neisaid);
if (t->val != MOUSE_PROTO_UNKNOWN)
return t;
}
/*
* The 'Compatible drivers' field may contain more than one
* ID separated by ','.
*/
if (id->ncompat <= 0)
return NULL;
for (i = 0; i < id->ncompat; ++i) {
for (j = i; id->compat[i] != ','; ++i)
if (i >= id->ncompat)
break;
if (i > j) {
t = gettoken(pnpprod, id->compat + j, i - j);
if (t->val != MOUSE_PROTO_UNKNOWN)
return t;
}
}
return NULL;
}
/* name/val mapping */
static symtab_t *
gettoken(symtab_t *tab, char *s, int len)
{
int i;
for (i = 0; tab[i].name != NULL; ++i) {
if (strncmp(tab[i].name, s, len) == 0)
break;
}
return &tab[i];
}
static char *
gettokenname(symtab_t *tab, int val)
{
int i;
for (i = 0; tab[i].name != NULL; ++i) {
if (tab[i].val == val)
return tab[i].name;
}
return NULL;
}
/*
* code to read from the Genius Kidspad tablet.
The tablet responds to the COM PnP protocol 1.0 with EISA-ID KYE0005,
and to pre-pnp probes (RTS toggle) with 'T' (tablet ?)
9600, 8 bit, parity odd.
The tablet puts out 5 bytes. b0 (mask 0xb8, value 0xb8) contains
the proximity, tip and button info:
(byte0 & 0x1) true = tip pressed
(byte0 & 0x2) true = button pressed
(byte0 & 0x40) false = pen in proximity of tablet.
The next 4 bytes are used for coordinates xl, xh, yl, yh (7 bits valid).
Only absolute coordinates are returned, so we use the following approach:
we store the last coordinates sent when the pen went out of the tablet,
*
*/
typedef enum {
S_IDLE, S_PROXY, S_FIRST, S_DOWN, S_UP
} k_status ;
static int
kidspad(u_char rxc, mousestatus_t *act)
{
static int buf[5];
static int buflen = 0, b_prev = 0 , x_prev = -1, y_prev = -1 ;
static k_status status = S_IDLE ;
static struct timeval old, now ;
int x, y ;
if (buflen > 0 && (rxc & 0x80)) {
fprintf(stderr, "invalid code %d 0x%x\n", buflen, rxc);
buflen = 0 ;
}
if (buflen == 0 && (rxc & 0xb8) != 0xb8) {
fprintf(stderr, "invalid code 0 0x%x\n", rxc);
return 0 ; /* invalid code, no action */
}
buf[buflen++] = rxc ;
if (buflen < 5)
return 0 ;
buflen = 0 ; /* for next time... */
x = buf[1]+128*(buf[2] - 7) ;
if (x < 0) x = 0 ;
y = 28*128 - (buf[3] + 128* (buf[4] - 7)) ;
if (y < 0) y = 0 ;
x /= 8 ;
y /= 8 ;
act->flags = 0 ;
act->obutton = act->button ;
act->dx = act->dy = act->dz = 0 ;
gettimeofday(&now, NULL);
if (buf[0] & 0x40) /* pen went out of reach */
status = S_IDLE ;
else if (status == S_IDLE) { /* pen is newly near the tablet */
act->flags |= MOUSE_POSCHANGED ; /* force update */
status = S_PROXY ;
x_prev = x ;
y_prev = y ;
}
old = now ;
act->dx = x - x_prev ;
act->dy = y - y_prev ;
if (act->dx || act->dy)
act->flags |= MOUSE_POSCHANGED ;
x_prev = x ;
y_prev = y ;
if (b_prev != 0 && b_prev != buf[0]) { /* possibly record button change */
act->button = 0 ;
if (buf[0] & 0x01) /* tip pressed */
act->button |= MOUSE_BUTTON1DOWN ;
if (buf[0] & 0x02) /* button pressed */
act->button |= MOUSE_BUTTON2DOWN ;
act->flags |= MOUSE_BUTTONSCHANGED ;
}
b_prev = buf[0] ;
return act->flags ;
}
static int
gtco_digipad (u_char rxc, mousestatus_t *act)
{
static u_char buf[5];
static int buflen = 0, b_prev = 0 , x_prev = -1, y_prev = -1 ;
static k_status status = S_IDLE ;
int x, y;
#define GTCO_HEADER 0x80
#define GTCO_PROXIMITY 0x40
#define GTCO_START (GTCO_HEADER|GTCO_PROXIMITY)
#define GTCO_BUTTONMASK 0x3c
if (buflen > 0 && ((rxc & GTCO_HEADER) != GTCO_HEADER)) {
fprintf(stderr, "invalid code %d 0x%x\n", buflen, rxc);
buflen = 0 ;
}
if (buflen == 0 && (rxc & GTCO_START) != GTCO_START) {
fprintf(stderr, "invalid code 0 0x%x\n", rxc);
return 0 ; /* invalid code, no action */
}
buf[buflen++] = rxc ;
if (buflen < 5)
return 0 ;
buflen = 0 ; /* for next time... */
x = ((buf[2] & ~GTCO_START) << 6 | (buf[1] & ~GTCO_START));
y = 4768 - ((buf[4] & ~GTCO_START) << 6 | (buf[3] & ~GTCO_START));
x /= 2.5;
y /= 2.5;
act->flags = 0 ;
act->obutton = act->button ;
act->dx = act->dy = act->dz = 0 ;
if ((buf[0] & 0x40) == 0) /* pen went out of reach */
status = S_IDLE ;
else if (status == S_IDLE) { /* pen is newly near the tablet */
act->flags |= MOUSE_POSCHANGED ; /* force update */
status = S_PROXY ;
x_prev = x ;
y_prev = y ;
}
act->dx = x - x_prev ;
act->dy = y - y_prev ;
if (act->dx || act->dy)
act->flags |= MOUSE_POSCHANGED ;
x_prev = x ;
y_prev = y ;
/* possibly record button change */
if (b_prev != 0 && b_prev != buf[0]) {
act->button = 0 ;
if (buf[0] & 0x04) /* tip pressed/yellow */
act->button |= MOUSE_BUTTON1DOWN ;
if (buf[0] & 0x08) /* grey/white */
act->button |= MOUSE_BUTTON2DOWN ;
if (buf[0] & 0x10) /* black/green */
act->button |= MOUSE_BUTTON3DOWN ;
if (buf[0] & 0x20) /* tip+grey/blue */
act->button |= MOUSE_BUTTON4DOWN ;
act->flags |= MOUSE_BUTTONSCHANGED ;
}
b_prev = buf[0] ;
return act->flags ;
}
static void
mremote_serversetup()
{
struct sockaddr_un ad;
/* Open a UNIX domain stream socket to listen for mouse remote clients */
unlink(_PATH_MOUSEREMOTE);
if ((rodent.mremsfd = socket(AF_UNIX, SOCK_STREAM, 0)) < 0)
logerrx(1, "unable to create unix domain socket %s",_PATH_MOUSEREMOTE);
umask(0111);
bzero(&ad, sizeof(ad));
ad.sun_family = AF_UNIX;
strcpy(ad.sun_path, _PATH_MOUSEREMOTE);
#ifndef SUN_LEN
#define SUN_LEN(unp) (((char *)(unp)->sun_path - (char *)(unp)) + \
strlen((unp)->path))
#endif
if (bind(rodent.mremsfd, (struct sockaddr *) &ad, SUN_LEN(&ad)) < 0)
logerrx(1, "unable to bind unix domain socket %s", _PATH_MOUSEREMOTE);
listen(rodent.mremsfd, 1);
}
static void
mremote_clientchg(int add)
{
struct sockaddr_un ad;
int ad_len, fd;
if (rodent.rtype != MOUSE_PROTO_X10MOUSEREM)
return;
if (add) {
/* Accept client connection, if we don't already have one */
ad_len = sizeof(ad);
fd = accept(rodent.mremsfd, (struct sockaddr *) &ad, &ad_len);
if (fd < 0)
logwarnx("failed accept on mouse remote socket");
if (rodent.mremcfd < 0) {
rodent.mremcfd = fd;
debug("remote client connect...accepted");
}
else {
close(fd);
debug("another remote client connect...disconnected");
}
}
else {
/* Client disconnected */
debug("remote client disconnected");
close(rodent.mremcfd);
rodent.mremcfd = -1;
}
}