freebsd-dev/sys/dev/ed/if_ed_pccard.c
John Baldwin b1f459a01b Use a private callout timer to drive the transmit watchdog instead of using
if_watchdog and if_timer.  The driver already contained an optional stats
timer that individual attachments could use to provide a 'tick' event.  The
stats timer only ran if the tick function pointer was non-NULL and the
attachment's tick routine had to call callout_reset(), etc.  Now the driver
always schedules a stat timer and manages the callout_reset() internally.
This timer is used to drive the watchdog and will also call the attachment's
'tick' handler if one is provided.

Tested by:	WATANABE Kazuhiro
2009-11-17 14:23:09 +00:00

1253 lines
37 KiB
C

/*-
* Copyright (c) 2005, M. Warner Losh
* Copyright (c) 1995, David Greenman
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Notes for adding media support. Each chipset is somewhat different
* from the others. Linux has a table of OIDs that it uses to see what
* supports the misc register of the NS83903. But a sampling of datasheets
* I could dig up on cards I own paints a different picture.
*
* Chipset specific details:
* NS 83903/902A paired
* ccr base 0x1020
* id register at 0x1000: 7-3 = 0, 2-0 = 1.
* (maybe this test is too week)
* misc register at 0x018:
* 6 WAIT_TOUTENABLE enable watchdog timeout
* 3 AUI/TPI 1 AUX, 0 TPI
* 2 loopback
* 1 gdlink (tpi mode only) 1 tp good, 0 tp bad
* 0 0-no mam, 1 mam connected
*
* NS83926 appears to be a NS pcmcia glue chip used on the IBM Ethernet II
* and the NEC PC9801N-J12 ccr base 0x2000!
*
* winbond 289c926
* ccr base 0xfd0
* cfb (am 0xff2):
* 0-1 PHY01 00 TPI, 01 10B2, 10 10B5, 11 TPI (reduced squ)
* 2 LNKEN 0 - enable link and auto switch, 1 disable
* 3 LNKSTS TPI + LNKEN=0 + link good == 1, else 0
* sr (am 0xff4)
* 88 00 88 00 88 00, etc
*
* TMI tc3299a (cr PHY01 == 0)
* ccr base 0x3f8
* cra (io 0xa)
* crb (io 0xb)
* 0-1 PHY01 00 auto, 01 res, 10 10B5, 11 TPI
* 2 GDLINK 1 disable checking of link
* 6 LINK 0 bad link, 1 good link
*
* EN5017A, EN5020 no data, but very popular
* Other chips?
* NetBSD supports RTL8019, but none have surfaced that I can see
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/socket.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/uio.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_mib.h>
#include <net/if_media.h>
#include <dev/ed/if_edreg.h>
#include <dev/ed/if_edvar.h>
#include <dev/ed/ax88x90reg.h>
#include <dev/ed/dl100xxreg.h>
#include <dev/ed/tc5299jreg.h>
#include <dev/pccard/pccardvar.h>
#include <dev/pccard/pccardreg.h>
#include <dev/pccard/pccard_cis.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "card_if.h"
/* "device miibus" required. See GENERIC if you get errors here. */
#include "miibus_if.h"
#include "pccarddevs.h"
/*
* NE-2000 based PC Cards have a number of ways to get the MAC address.
* Some cards encode this as a FUNCE. Others have this in the ROMs the
* same way that ISA cards do. Some have it encoded in the attribute
* memory somewhere that isn't in the CIS. Some new chipsets have it
* in special registers in the ASIC part of the chip.
*
* For those cards that have the MAC adress stored in attribute memory
* outside of a FUNCE entry in the CIS, nearly all of them have it at
* a fixed offset (0xff0). We use that offset as a source of last
* resource if other offsets have failed. This is the address of the
* National Semiconductor DP83903A, which is the only chip's datasheet
* I've found.
*/
#define ED_DEFAULT_MAC_OFFSET 0xff0
static const struct ed_product {
struct pccard_product prod;
int flags;
#define NE2000DVF_DL100XX 0x0001 /* chip is D-Link DL10019/22 */
#define NE2000DVF_AX88X90 0x0002 /* chip is ASIX AX88[17]90 */
#define NE2000DVF_TC5299J 0x0004 /* chip is Tamarack TC5299J */
#define NE2000DVF_TOSHIBA 0x0008 /* Toshiba DP83902A */
#define NE2000DVF_ENADDR 0x0100 /* Get MAC from attr mem */
#define NE2000DVF_ANYFUNC 0x0200 /* Allow any function type */
#define NE2000DVF_MODEM 0x0400 /* Has a modem/serial */
int enoff;
} ed_pccard_products[] = {
{ PCMCIA_CARD(ACCTON, EN2212), 0},
{ PCMCIA_CARD(ACCTON, EN2216), 0},
{ PCMCIA_CARD(ALLIEDTELESIS, LA_PCM), 0},
{ PCMCIA_CARD(AMBICOM, AMB8002), 0},
{ PCMCIA_CARD(AMBICOM, AMB8002T), 0},
{ PCMCIA_CARD(AMBICOM, AMB8010), 0},
{ PCMCIA_CARD(AMBICOM, AMB8010_ALT), 0},
{ PCMCIA_CARD(AMBICOM, AMB8610), 0},
{ PCMCIA_CARD(BILLIONTON, CFLT10N), 0},
{ PCMCIA_CARD(BILLIONTON, LNA100B), NE2000DVF_AX88X90},
{ PCMCIA_CARD(BILLIONTON, LNT10TB), 0},
{ PCMCIA_CARD(BILLIONTON, LNT10TN), 0},
{ PCMCIA_CARD(BROMAX, AXNET), NE2000DVF_AX88X90},
{ PCMCIA_CARD(BROMAX, IPORT), 0},
{ PCMCIA_CARD(BROMAX, IPORT2), 0},
{ PCMCIA_CARD(BUFFALO, LPC2_CLT), 0},
{ PCMCIA_CARD(BUFFALO, LPC3_CLT), 0},
{ PCMCIA_CARD(BUFFALO, LPC3_CLX), NE2000DVF_AX88X90},
{ PCMCIA_CARD(BUFFALO, LPC4_TX), NE2000DVF_AX88X90},
{ PCMCIA_CARD(BUFFALO, LPC4_CLX), NE2000DVF_AX88X90},
{ PCMCIA_CARD(BUFFALO, LPC_CF_CLT), 0},
{ PCMCIA_CARD(CNET, NE2000), 0},
{ PCMCIA_CARD(COMPEX, AX88190), NE2000DVF_AX88X90},
{ PCMCIA_CARD(COMPEX, LANMODEM), 0},
{ PCMCIA_CARD(COMPEX, LINKPORT_ENET_B), 0},
{ PCMCIA_CARD(COREGA, ETHER_II_PCC_T), 0},
{ PCMCIA_CARD(COREGA, ETHER_II_PCC_TD), 0},
{ PCMCIA_CARD(COREGA, ETHER_PCC_T), 0},
{ PCMCIA_CARD(COREGA, ETHER_PCC_TD), 0},
{ PCMCIA_CARD(COREGA, FAST_ETHER_PCC_TX), NE2000DVF_DL100XX},
{ PCMCIA_CARD(COREGA, FETHER_PCC_TXD), NE2000DVF_AX88X90},
{ PCMCIA_CARD(COREGA, FETHER_PCC_TXF), NE2000DVF_DL100XX},
{ PCMCIA_CARD(COREGA, FETHER_II_PCC_TXD), NE2000DVF_AX88X90},
{ PCMCIA_CARD(COREGA, LAPCCTXD), 0},
{ PCMCIA_CARD(DAYNA, COMMUNICARD_E_1), 0},
{ PCMCIA_CARD(DAYNA, COMMUNICARD_E_2), 0},
{ PCMCIA_CARD(DLINK, DE650), NE2000DVF_ANYFUNC },
{ PCMCIA_CARD(DLINK, DE660), 0 },
{ PCMCIA_CARD(DLINK, DE660PLUS), 0},
{ PCMCIA_CARD(DYNALINK, L10C), 0},
{ PCMCIA_CARD(EDIMAX, EP4000A), 0},
{ PCMCIA_CARD(EPSON, EEN10B), 0},
{ PCMCIA_CARD(EXP, THINLANCOMBO), 0},
{ PCMCIA_CARD(GLOBALVILLAGE, LANMODEM), 0},
{ PCMCIA_CARD(GREY_CELL, TDK3000), 0},
{ PCMCIA_CARD(GREY_CELL, DMF650TX),
NE2000DVF_ANYFUNC | NE2000DVF_DL100XX | NE2000DVF_MODEM},
{ PCMCIA_CARD(GVC, NIC_2000P), 0},
{ PCMCIA_CARD(IBM, HOME_AND_AWAY), 0},
{ PCMCIA_CARD(IBM, INFOMOVER), 0},
{ PCMCIA_CARD(IODATA3, PCLAT), 0},
{ PCMCIA_CARD(KINGSTON, CIO10T), 0},
{ PCMCIA_CARD(KINGSTON, KNE2), 0},
{ PCMCIA_CARD(LANTECH, FASTNETTX), NE2000DVF_AX88X90},
/* Same ID for many different cards, including generic NE2000 */
{ PCMCIA_CARD(LINKSYS, COMBO_ECARD),
NE2000DVF_DL100XX | NE2000DVF_AX88X90},
{ PCMCIA_CARD(LINKSYS, ECARD_1), 0},
{ PCMCIA_CARD(LINKSYS, ECARD_2), 0},
{ PCMCIA_CARD(LINKSYS, ETHERFAST), NE2000DVF_DL100XX},
{ PCMCIA_CARD(LINKSYS, TRUST_COMBO_ECARD), 0},
{ PCMCIA_CARD(MACNICA, ME1_JEIDA), 0},
{ PCMCIA_CARD(MAGICRAM, ETHER), 0},
{ PCMCIA_CARD(MELCO, LPC3_CLX), NE2000DVF_AX88X90},
{ PCMCIA_CARD(MELCO, LPC3_TX), NE2000DVF_AX88X90},
{ PCMCIA_CARD(MELCO2, LPC2_T), 0},
{ PCMCIA_CARD(MELCO2, LPC2_TX), 0},
{ PCMCIA_CARD(MITSUBISHI, B8895), NE2000DVF_ANYFUNC}, /* NG */
{ PCMCIA_CARD(MICRORESEARCH, MR10TPC), 0},
{ PCMCIA_CARD(NDC, ND5100_E), 0},
{ PCMCIA_CARD(NETGEAR, FA410TXC), NE2000DVF_DL100XX},
/* Same ID as DLINK DFE-670TXD. 670 has DL10022, fa411 has ax88790 */
{ PCMCIA_CARD(NETGEAR, FA411), NE2000DVF_AX88X90 | NE2000DVF_DL100XX},
{ PCMCIA_CARD(NEXTCOM, NEXTHAWK), 0},
{ PCMCIA_CARD(NEWMEDIA, LANSURFER), NE2000DVF_ANYFUNC},
{ PCMCIA_CARD(NEWMEDIA, LIVEWIRE), 0},
{ PCMCIA_CARD(OEM2, 100BASE), NE2000DVF_AX88X90},
{ PCMCIA_CARD(OEM2, ETHERNET), 0},
{ PCMCIA_CARD(OEM2, FAST_ETHERNET), NE2000DVF_AX88X90},
{ PCMCIA_CARD(OEM2, NE2000), 0},
{ PCMCIA_CARD(PLANET, SMARTCOM2000), 0 },
{ PCMCIA_CARD(PREMAX, PE200), 0},
{ PCMCIA_CARD(PSION, LANGLOBAL),
NE2000DVF_ANYFUNC | NE2000DVF_AX88X90 | NE2000DVF_MODEM},
{ PCMCIA_CARD(RACORE, ETHERNET), 0},
{ PCMCIA_CARD(RACORE, FASTENET), NE2000DVF_AX88X90},
{ PCMCIA_CARD(RACORE, 8041TX), NE2000DVF_AX88X90 | NE2000DVF_TC5299J},
{ PCMCIA_CARD(RELIA, COMBO), 0},
{ PCMCIA_CARD(RIOS, PCCARD3), 0},
{ PCMCIA_CARD(RPTI, EP400), 0},
{ PCMCIA_CARD(RPTI, EP401), 0},
{ PCMCIA_CARD(SMC, EZCARD), 0},
{ PCMCIA_CARD(SOCKET, EA_ETHER), 0},
{ PCMCIA_CARD(SOCKET, ES_1000), 0},
{ PCMCIA_CARD(SOCKET, LP_ETHER), 0},
{ PCMCIA_CARD(SOCKET, LP_ETHER_CF), 0},
{ PCMCIA_CARD(SOCKET, LP_ETH_10_100_CF), NE2000DVF_DL100XX},
{ PCMCIA_CARD(SVEC, COMBOCARD), 0},
{ PCMCIA_CARD(SVEC, LANCARD), 0},
{ PCMCIA_CARD(TAMARACK, ETHERNET), 0},
{ PCMCIA_CARD(TDK, CFE_10), 0},
{ PCMCIA_CARD(TDK, LAK_CD031), 0},
{ PCMCIA_CARD(TDK, DFL5610WS), 0},
{ PCMCIA_CARD(TELECOMDEVICE, LM5LT), 0 },
{ PCMCIA_CARD(TELECOMDEVICE, TCD_HPC100), NE2000DVF_AX88X90},
{ PCMCIA_CARD(TJ, PTJ_LAN_T), 0 },
{ PCMCIA_CARD(TOSHIBA2, LANCT00A), NE2000DVF_ANYFUNC | NE2000DVF_TOSHIBA},
{ PCMCIA_CARD(ZONET, ZEN), 0},
{ { NULL } }
};
/*
* PC Card (PCMCIA) specific code.
*/
static int ed_pccard_probe(device_t);
static int ed_pccard_attach(device_t);
static void ed_pccard_tick(struct ed_softc *);
static int ed_pccard_dl100xx(device_t dev, const struct ed_product *);
static void ed_pccard_dl100xx_mii_reset(struct ed_softc *sc);
static u_int ed_pccard_dl100xx_mii_readbits(struct ed_softc *sc, int nbits);
static void ed_pccard_dl100xx_mii_writebits(struct ed_softc *sc, u_int val,
int nbits);
static int ed_pccard_ax88x90(device_t dev, const struct ed_product *);
static u_int ed_pccard_ax88x90_mii_readbits(struct ed_softc *sc, int nbits);
static void ed_pccard_ax88x90_mii_writebits(struct ed_softc *sc, u_int val,
int nbits);
static int ed_miibus_readreg(device_t dev, int phy, int reg);
static int ed_ifmedia_upd(struct ifnet *);
static void ed_ifmedia_sts(struct ifnet *, struct ifmediareq *);
static int ed_pccard_tc5299j(device_t dev, const struct ed_product *);
static u_int ed_pccard_tc5299j_mii_readbits(struct ed_softc *sc, int nbits);
static void ed_pccard_tc5299j_mii_writebits(struct ed_softc *sc, u_int val,
int nbits);
static void
ed_pccard_print_entry(const struct ed_product *pp)
{
int i;
printf("Product entry: ");
if (pp->prod.pp_name)
printf("name='%s',", pp->prod.pp_name);
printf("vendor=%#x,product=%#x", pp->prod.pp_vendor,
pp->prod.pp_product);
for (i = 0; i < 4; i++)
if (pp->prod.pp_cis[i])
printf(",CIS%d='%s'", i, pp->prod.pp_cis[i]);
printf("\n");
}
static int
ed_pccard_probe(device_t dev)
{
const struct ed_product *pp, *pp2;
int error, first = 1;
uint32_t fcn = PCCARD_FUNCTION_UNSPEC;
/* Make sure we're a network function */
error = pccard_get_function(dev, &fcn);
if (error != 0)
return (error);
if ((pp = (const struct ed_product *) pccard_product_lookup(dev,
(const struct pccard_product *) ed_pccard_products,
sizeof(ed_pccard_products[0]), NULL)) != NULL) {
if (pp->prod.pp_name != NULL)
device_set_desc(dev, pp->prod.pp_name);
/*
* Some devices don't ID themselves as network, but
* that's OK if the flags say so.
*/
if (!(pp->flags & NE2000DVF_ANYFUNC) &&
fcn != PCCARD_FUNCTION_NETWORK)
return (ENXIO);
/*
* Some devices match multiple entries. Report that
* as a warning to help cull the table
*/
pp2 = pp;
while ((pp2 = (const struct ed_product *)pccard_product_lookup(
dev, (const struct pccard_product *)(pp2 + 1),
sizeof(ed_pccard_products[0]), NULL)) != NULL) {
if (first) {
device_printf(dev,
"Warning: card matches multiple entries. Report to imp@freebsd.org\n");
ed_pccard_print_entry(pp);
first = 0;
}
ed_pccard_print_entry(pp2);
}
return (0);
}
return (ENXIO);
}
static int
ed_pccard_rom_mac(device_t dev, uint8_t *enaddr)
{
struct ed_softc *sc = device_get_softc(dev);
uint8_t romdata[32], sum;
int i;
/*
* Read in the rom data at location 0. Since there are no
* NE-1000 based PC Card devices, we'll assume we're 16-bit.
*
* In researching what format this takes, I've found that the
* following appears to be true for multiple cards based on
* observation as well as datasheet digging.
*
* Data is stored in some ROM and is copied out 8 bits at a time
* into 16-bit wide locations. This means that the odd locations
* of the ROM are not used (and can be either 0 or ff).
*
* The contents appears to be as follows:
* PROM RAM
* Offset Offset What
* 0 0 ENETADDR 0
* 1 2 ENETADDR 1
* 2 4 ENETADDR 2
* 3 6 ENETADDR 3
* 4 8 ENETADDR 4
* 5 10 ENETADDR 5
* 6-13 12-26 Reserved (varies by manufacturer)
* 14 28 0x57
* 15 30 0x57
*
* Some manufacturers have another image of enetaddr from
* PROM offset 0x10 to 0x15 with 0x42 in 0x1e and 0x1f, but
* this doesn't appear to be universally documented in the
* datasheets. Some manufactuers have a card type, card config
* checksums, etc encoded into PROM offset 6-13, but deciphering it
* requires more knowledge about the exact underlying chipset than
* we possess (and maybe can possess).
*/
ed_pio_readmem(sc, 0, romdata, 32);
if (bootverbose)
device_printf(dev, "ROM DATA: %32D\n", romdata, " ");
if (romdata[28] != 0x57 || romdata[30] != 0x57)
return (0);
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= romdata[i * 2];
if (sum == 0)
return (0);
for (i = 0; i < ETHER_ADDR_LEN; i++)
enaddr[i] = romdata[i * 2];
return (1);
}
static int
ed_pccard_add_modem(device_t dev)
{
device_printf(dev, "Need to write this code\n");
return 0;
}
static int
ed_pccard_kick_phy(struct ed_softc *sc)
{
struct mii_softc *miisc;
struct mii_data *mii;
/*
* Many of the PHYs that wind up on PC Cards are weird in
* this way. Generally, we don't need to worry so much about
* the Isolation protocol since there's only one PHY in
* these designs, so this workaround is reasonable.
*/
mii = device_get_softc(sc->miibus);
LIST_FOREACH(miisc, &mii->mii_phys, mii_list) {
miisc->mii_flags |= MIIF_FORCEANEG;
mii_phy_reset(miisc);
}
return (mii_mediachg(mii));
}
static int
ed_pccard_media_ioctl(struct ed_softc *sc, struct ifreq *ifr, u_long command)
{
struct mii_data *mii;
if (sc->miibus == NULL)
return (EINVAL);
mii = device_get_softc(sc->miibus);
return (ifmedia_ioctl(sc->ifp, ifr, &mii->mii_media, command));
}
static void
ed_pccard_mediachg(struct ed_softc *sc)
{
struct mii_data *mii;
if (sc->miibus == NULL)
return;
mii = device_get_softc(sc->miibus);
mii_mediachg(mii);
}
static int
ed_pccard_attach(device_t dev)
{
u_char sum;
u_char enaddr[ETHER_ADDR_LEN];
const struct ed_product *pp;
int error, i, flags, port_rid, modem_rid;
struct ed_softc *sc = device_get_softc(dev);
u_long size;
static uint16_t *intr_vals[] = {NULL, NULL};
sc->dev = dev;
if ((pp = (const struct ed_product *) pccard_product_lookup(dev,
(const struct pccard_product *) ed_pccard_products,
sizeof(ed_pccard_products[0]), NULL)) == NULL) {
printf("Can't find\n");
return (ENXIO);
}
modem_rid = port_rid = -1;
if (pp->flags & NE2000DVF_MODEM) {
for (i = 0; i < 4; i++) {
size = bus_get_resource_count(dev, SYS_RES_IOPORT, i);
if (size == ED_NOVELL_IO_PORTS)
port_rid = i;
else if (size == 8)
modem_rid = i;
}
if (port_rid == -1) {
device_printf(dev, "Cannot locate my ports!\n");
return (ENXIO);
}
} else {
port_rid = 0;
}
/* Allocate the port resource during setup. */
error = ed_alloc_port(dev, port_rid, ED_NOVELL_IO_PORTS);
if (error) {
printf("alloc_port failed\n");
return (error);
}
if (rman_get_size(sc->port_res) == ED_NOVELL_IO_PORTS / 2) {
port_rid++;
sc->port_res2 = bus_alloc_resource(dev, SYS_RES_IOPORT,
&port_rid, 0ul, ~0ul, 1, RF_ACTIVE);
if (sc->port_res2 == NULL ||
rman_get_size(sc->port_res2) != ED_NOVELL_IO_PORTS / 2) {
error = ENXIO;
goto bad;
}
}
error = ed_alloc_irq(dev, 0, 0);
if (error)
goto bad;
/*
* Determine which chipset we are. Almost all the PC Card chipsets
* have the Novel ASIC and NIC offsets. There's 2 known cards that
* follow the WD80x3 conventions, which are handled as a special case.
*/
sc->asic_offset = ED_NOVELL_ASIC_OFFSET;
sc->nic_offset = ED_NOVELL_NIC_OFFSET;
error = ENXIO;
flags = device_get_flags(dev);
if (error != 0)
error = ed_pccard_dl100xx(dev, pp);
if (error != 0)
error = ed_pccard_ax88x90(dev, pp);
if (error != 0)
error = ed_pccard_tc5299j(dev, pp);
if (error != 0) {
error = ed_probe_Novell_generic(dev, flags);
printf("Novell probe generic %d\n", error);
}
if (error != 0 && (pp->flags & NE2000DVF_TOSHIBA)) {
flags |= ED_FLAGS_TOSH_ETHER;
flags |= ED_FLAGS_PCCARD;
sc->asic_offset = ED_WD_ASIC_OFFSET;
sc->nic_offset = ED_WD_NIC_OFFSET;
error = ed_probe_WD80x3_generic(dev, flags, intr_vals);
}
if (error)
goto bad;
/*
* There are several ways to get the MAC address for the card.
* Some of the above probe routines can fill in the enaddr. If
* not, we run through a number of 'well known' locations:
* (1) From the PC Card FUNCE
* (2) From offset 0 in the shared memory
* (3) From a hinted offset in attribute memory
* (4) From 0xff0 in attribute memory
* If we can't get a non-zero MAC address from this list, we fail.
*/
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= sc->enaddr[i];
if (sum == 0) {
pccard_get_ether(dev, enaddr);
if (bootverbose)
device_printf(dev, "CIS MAC %6D\n", enaddr, ":");
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= enaddr[i];
if (sum == 0 && ed_pccard_rom_mac(dev, enaddr)) {
if (bootverbose)
device_printf(dev, "ROM mac %6D\n", enaddr,
":");
sum++;
}
if (sum == 0 && pp->flags & NE2000DVF_ENADDR) {
for (i = 0; i < ETHER_ADDR_LEN; i++) {
pccard_attr_read_1(dev, pp->enoff + i * 2,
enaddr + i);
sum |= enaddr[i];
}
if (bootverbose)
device_printf(dev, "Hint %x MAC %6D\n",
pp->enoff, enaddr, ":");
}
if (sum == 0) {
for (i = 0; i < ETHER_ADDR_LEN; i++) {
pccard_attr_read_1(dev, ED_DEFAULT_MAC_OFFSET +
i * 2, enaddr + i);
sum |= enaddr[i];
}
if (bootverbose)
device_printf(dev, "Fallback MAC %6D\n",
enaddr, ":");
}
if (sum == 0) {
device_printf(dev, "Cannot extract MAC address.\n");
ed_release_resources(dev);
return (ENXIO);
}
bcopy(enaddr, sc->enaddr, ETHER_ADDR_LEN);
}
error = ed_attach(dev);
if (error)
goto bad;
if (sc->chip_type == ED_CHIP_TYPE_DL10019 ||
sc->chip_type == ED_CHIP_TYPE_DL10022) {
/* Probe for an MII bus, but ignore errors. */
ed_pccard_dl100xx_mii_reset(sc);
(void)mii_phy_probe(dev, &sc->miibus, ed_ifmedia_upd,
ed_ifmedia_sts);
} else if (sc->chip_type == ED_CHIP_TYPE_AX88190 ||
sc->chip_type == ED_CHIP_TYPE_AX88790) {
if ((error = mii_phy_probe(dev, &sc->miibus, ed_ifmedia_upd,
ed_ifmedia_sts)) != 0) {
device_printf(dev, "Missing mii %d!\n", error);
goto bad;
}
} else if (sc->chip_type == ED_CHIP_TYPE_TC5299J) {
if ((error = mii_phy_probe(dev, &sc->miibus, ed_ifmedia_upd,
ed_ifmedia_sts)) != 0) {
device_printf(dev, "Missing mii!\n");
goto bad;
}
}
if (sc->miibus != NULL) {
sc->sc_tick = ed_pccard_tick;
sc->sc_mediachg = ed_pccard_mediachg;
sc->sc_media_ioctl = ed_pccard_media_ioctl;
ed_pccard_kick_phy(sc);
} else {
ed_gen_ifmedia_init(sc);
}
if (modem_rid != -1)
ed_pccard_add_modem(dev);
error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET | INTR_MPSAFE,
NULL, edintr, sc, &sc->irq_handle);
if (error) {
device_printf(dev, "setup intr failed %d \n", error);
goto bad;
}
return (0);
bad:
ed_detach(dev);
return (error);
}
/*
* Probe the Ethernet MAC addrees for PCMCIA Linksys EtherFast 10/100
* and compatible cards (DL10019C Ethernet controller).
*/
static int
ed_pccard_dl100xx(device_t dev, const struct ed_product *pp)
{
struct ed_softc *sc = device_get_softc(dev);
u_char sum;
uint8_t id;
u_int memsize;
int i, error;
if (!(pp->flags & NE2000DVF_DL100XX))
return (ENXIO);
if (bootverbose)
device_printf(dev, "Trying DL100xx probing\n");
error = ed_probe_Novell_generic(dev, device_get_flags(dev));
if (bootverbose && error)
device_printf(dev, "Novell generic probe failed: %d\n", error);
if (error != 0)
return (error);
/*
* Linksys registers(offset from ASIC base)
*
* 0x04-0x09 : Physical Address Register 0-5 (PAR0-PAR5)
* 0x0A : Card ID Register (CIR)
* 0x0B : Check Sum Register (SR)
*/
for (sum = 0, i = 0x04; i < 0x0c; i++)
sum += ed_asic_inb(sc, i);
if (sum != 0xff) {
if (bootverbose)
device_printf(dev, "Bad checksum %#x\n", sum);
return (ENXIO); /* invalid DL10019C */
}
if (bootverbose)
device_printf(dev, "CIR is %d\n", ed_asic_inb(sc, 0xa));
for (i = 0; i < ETHER_ADDR_LEN; i++)
sc->enaddr[i] = ed_asic_inb(sc, 0x04 + i);
ed_nic_outb(sc, ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS);
id = ed_asic_inb(sc, 0xf);
sc->isa16bit = 1;
/*
* Hard code values based on the datasheet. We're NE-2000 compatible
* NIC with 24kb of packet memory starting at 24k offset. These
* cards also work with 16k at 16k, but don't work with 24k at 16k
* or 32k at 16k.
*/
sc->type = ED_TYPE_NE2000;
sc->mem_start = 24 * 1024;
memsize = sc->mem_size = 24 * 1024;
sc->mem_end = sc->mem_start + memsize;
sc->tx_page_start = memsize / ED_PAGE_SIZE;
sc->txb_cnt = 3;
sc->rec_page_start = sc->tx_page_start + sc->txb_cnt * ED_TXBUF_SIZE;
sc->rec_page_stop = sc->tx_page_start + memsize / ED_PAGE_SIZE;
sc->mem_ring = sc->mem_start + sc->txb_cnt * ED_PAGE_SIZE * ED_TXBUF_SIZE;
ed_nic_outb(sc, ED_P0_PSTART, sc->mem_start / ED_PAGE_SIZE);
ed_nic_outb(sc, ED_P0_PSTOP, sc->mem_end / ED_PAGE_SIZE);
sc->vendor = ED_VENDOR_NOVELL;
sc->chip_type = (id & 0x90) == 0x90 ?
ED_CHIP_TYPE_DL10022 : ED_CHIP_TYPE_DL10019;
sc->type_str = ((id & 0x90) == 0x90) ? "DL10022" : "DL10019";
sc->mii_readbits = ed_pccard_dl100xx_mii_readbits;
sc->mii_writebits = ed_pccard_dl100xx_mii_writebits;
return (0);
}
/* MII bit-twiddling routines for cards using Dlink chipset */
#define DL100XX_MIISET(sc, x) ed_asic_outb(sc, ED_DL100XX_MIIBUS, \
ed_asic_inb(sc, ED_DL100XX_MIIBUS) | (x))
#define DL100XX_MIICLR(sc, x) ed_asic_outb(sc, ED_DL100XX_MIIBUS, \
ed_asic_inb(sc, ED_DL100XX_MIIBUS) & ~(x))
static void
ed_pccard_dl100xx_mii_reset(struct ed_softc *sc)
{
if (sc->chip_type != ED_CHIP_TYPE_DL10022)
return;
ed_asic_outb(sc, ED_DL100XX_MIIBUS, ED_DL10022_MII_RESET2);
DELAY(10);
ed_asic_outb(sc, ED_DL100XX_MIIBUS,
ED_DL10022_MII_RESET2 | ED_DL10022_MII_RESET1);
DELAY(10);
ed_asic_outb(sc, ED_DL100XX_MIIBUS, ED_DL10022_MII_RESET2);
DELAY(10);
ed_asic_outb(sc, ED_DL100XX_MIIBUS,
ED_DL10022_MII_RESET2 | ED_DL10022_MII_RESET1);
DELAY(10);
ed_asic_outb(sc, ED_DL100XX_MIIBUS, 0);
}
static void
ed_pccard_dl100xx_mii_writebits(struct ed_softc *sc, u_int val, int nbits)
{
int i;
DL100XX_MIISET(sc, ED_DL100XX_MII_DIROUT);
for (i = nbits - 1; i >= 0; i--) {
if ((val >> i) & 1)
DL100XX_MIISET(sc, ED_DL100XX_MII_DATAOUT);
else
DL100XX_MIICLR(sc, ED_DL100XX_MII_DATAOUT);
DL100XX_MIISET(sc, ED_DL100XX_MII_CLK);
DL100XX_MIICLR(sc, ED_DL100XX_MII_CLK);
}
}
static u_int
ed_pccard_dl100xx_mii_readbits(struct ed_softc *sc, int nbits)
{
int i;
u_int val = 0;
DL100XX_MIICLR(sc, ED_DL100XX_MII_DIROUT);
for (i = nbits - 1; i >= 0; i--) {
DL100XX_MIISET(sc, ED_DL100XX_MII_CLK);
val <<= 1;
if (ed_asic_inb(sc, ED_DL100XX_MIIBUS) & ED_DL100XX_MII_DATAIN)
val++;
DL100XX_MIICLR(sc, ED_DL100XX_MII_CLK);
}
return val;
}
static void
ed_pccard_ax88x90_reset(struct ed_softc *sc)
{
int i;
/* Reset Card */
ed_nic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STP | ED_CR_PAGE_0);
ed_asic_outb(sc, ED_NOVELL_RESET, ed_asic_inb(sc, ED_NOVELL_RESET));
/* Wait for the RST bit to assert, but cap it at 10ms */
for (i = 10000; !(ed_nic_inb(sc, ED_P0_ISR) & ED_ISR_RST) && i > 0;
i--)
continue;
ed_nic_outb(sc, ED_P0_ISR, ED_ISR_RST); /* ACK INTR */
if (i == 0)
device_printf(sc->dev, "Reset didn't finish\n");
}
/*
* Probe and vendor-specific initialization routine for ax88x90 boards
*/
static int
ed_probe_ax88x90_generic(device_t dev, int flags)
{
struct ed_softc *sc = device_get_softc(dev);
u_int memsize;
static char test_pattern[32] = "THIS is A memory TEST pattern";
char test_buffer[32];
ed_pccard_ax88x90_reset(sc);
DELAY(10*1000);
/* Make sure that we really have an 8390 based board */
if (!ed_probe_generic8390(sc))
return (ENXIO);
sc->vendor = ED_VENDOR_NOVELL;
sc->mem_shared = 0;
sc->cr_proto = ED_CR_RD2;
/*
* This prevents packets from being stored in the NIC memory when the
* readmem routine turns on the start bit in the CR. We write some
* bytes in word mode and verify we can read them back. If we can't
* then we don't have an AX88x90 chip here.
*/
sc->isa16bit = 1;
ed_nic_outb(sc, ED_P0_RCR, ED_RCR_MON);
ed_nic_outb(sc, ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS);
ed_pio_writemem(sc, test_pattern, 16384, sizeof(test_pattern));
ed_pio_readmem(sc, 16384, test_buffer, sizeof(test_pattern));
if (bcmp(test_pattern, test_buffer, sizeof(test_pattern)) != 0)
return (ENXIO);
/*
* Hard code values based on the datasheet. We're NE-2000 compatible
* NIC with 16kb of packet memory starting at 16k offset.
*/
sc->type = ED_TYPE_NE2000;
memsize = sc->mem_size = 16*1024;
sc->mem_start = 16 * 1024;
if (ed_asic_inb(sc, ED_AX88X90_TEST) != 0)
sc->chip_type = ED_CHIP_TYPE_AX88790;
else {
sc->chip_type = ED_CHIP_TYPE_AX88190;
/*
* The AX88190 (not A) has external 64k SRAM. Probe for this
* here. Most of the cards I have either use the AX88190A
* part, or have only 32k SRAM for some reason, so I don't
* know if this works or not.
*/
ed_pio_writemem(sc, test_pattern, 32768, sizeof(test_pattern));
ed_pio_readmem(sc, 32768, test_buffer, sizeof(test_pattern));
if (bcmp(test_pattern, test_buffer, sizeof(test_pattern)) == 0) {
sc->mem_start = 2*1024;
memsize = sc->mem_size = 62 * 1024;
}
}
sc->mem_end = sc->mem_start + memsize;
sc->tx_page_start = memsize / ED_PAGE_SIZE;
if (sc->mem_size > 16 * 1024)
sc->txb_cnt = 3;
else
sc->txb_cnt = 2;
sc->rec_page_start = sc->tx_page_start + sc->txb_cnt * ED_TXBUF_SIZE;
sc->rec_page_stop = sc->tx_page_start + memsize / ED_PAGE_SIZE;
sc->mem_ring = sc->mem_start + sc->txb_cnt * ED_PAGE_SIZE * ED_TXBUF_SIZE;
ed_nic_outb(sc, ED_P0_PSTART, sc->mem_start / ED_PAGE_SIZE);
ed_nic_outb(sc, ED_P0_PSTOP, sc->mem_end / ED_PAGE_SIZE);
/* Get the mac before we go -- It's just at 0x400 in "SRAM" */
ed_pio_readmem(sc, 0x400, sc->enaddr, ETHER_ADDR_LEN);
/* clear any pending interrupts that might have occurred above */
ed_nic_outb(sc, ED_P0_ISR, 0xff);
sc->sc_write_mbufs = ed_pio_write_mbufs;
return (0);
}
static int
ed_pccard_ax88x90_check_mii(device_t dev, struct ed_softc *sc)
{
int i, id;
/*
* All AX88x90 devices have MII and a PHY, so we use this to weed out
* chips that would otherwise make it through the tests we have after
* this point.
*/
for (i = 0; i < 32; i++) {
id = ed_miibus_readreg(dev, i, MII_BMSR);
if (id != 0 && id != 0xffff)
break;
}
/*
* Found one, we're good.
*/
if (i != 32)
return (0);
/*
* Didn't find anything, so try to power up and try again. The PHY
* may be not responding because we're in power down mode.
*/
if (sc->chip_type == ED_CHIP_TYPE_AX88190)
return (ENXIO);
pccard_ccr_write_1(dev, PCCARD_CCR_STATUS, PCCARD_CCR_STATUS_PWRDWN);
for (i = 0; i < 32; i++) {
id = ed_miibus_readreg(dev, i, MII_BMSR);
if (id != 0 && id != 0xffff)
break;
}
/*
* Still no joy? We're AFU, punt.
*/
if (i == 32)
return (ENXIO);
return (0);
}
/*
* Special setup for AX88[17]90
*/
static int
ed_pccard_ax88x90(device_t dev, const struct ed_product *pp)
{
int error;
int iobase;
struct ed_softc *sc = device_get_softc(dev);
if (!(pp->flags & NE2000DVF_AX88X90))
return (ENXIO);
if (bootverbose)
device_printf(dev, "Checking AX88x90\n");
/*
* Set the IOBASE Register. The AX88x90 cards are potentially
* multifunction cards, and thus requires a slight workaround.
* We write the address the card is at, on the off chance that this
* card is not MFC.
* XXX I'm not sure that this is still needed...
*/
iobase = rman_get_start(sc->port_res);
pccard_ccr_write_1(dev, PCCARD_CCR_IOBASE0, iobase & 0xff);
pccard_ccr_write_1(dev, PCCARD_CCR_IOBASE1, (iobase >> 8) & 0xff);
sc->mii_readbits = ed_pccard_ax88x90_mii_readbits;
sc->mii_writebits = ed_pccard_ax88x90_mii_writebits;
error = ed_probe_ax88x90_generic(dev, device_get_flags(dev));
if (error) {
if (bootverbose)
device_printf(dev, "probe ax88x90 failed %d\n",
error);
goto fail;
}
error = ed_pccard_ax88x90_check_mii(dev, sc);
if (error)
goto fail;
sc->vendor = ED_VENDOR_NOVELL;
sc->type = ED_TYPE_NE2000;
if (sc->chip_type == ED_CHIP_TYPE_AX88190)
sc->type_str = "AX88190";
else
sc->type_str = "AX88790";
return (0);
fail:;
sc->mii_readbits = 0;
sc->mii_writebits = 0;
return (error);
}
static void
ed_pccard_ax88x90_mii_writebits(struct ed_softc *sc, u_int val, int nbits)
{
int i, data;
for (i = nbits - 1; i >= 0; i--) {
data = (val >> i) & 1 ? ED_AX88X90_MII_DATAOUT : 0;
ed_asic_outb(sc, ED_AX88X90_MIIBUS, data);
ed_asic_outb(sc, ED_AX88X90_MIIBUS, data | ED_AX88X90_MII_CLK);
}
}
static u_int
ed_pccard_ax88x90_mii_readbits(struct ed_softc *sc, int nbits)
{
int i;
u_int val = 0;
uint8_t mdio;
mdio = ED_AX88X90_MII_DIRIN;
for (i = nbits - 1; i >= 0; i--) {
ed_asic_outb(sc, ED_AX88X90_MIIBUS, mdio);
val <<= 1;
if (ed_asic_inb(sc, ED_AX88X90_MIIBUS) & ED_AX88X90_MII_DATAIN)
val++;
ed_asic_outb(sc, ED_AX88X90_MIIBUS, mdio | ED_AX88X90_MII_CLK);
}
return val;
}
/*
* Special setup for TC5299J
*/
static int
ed_pccard_tc5299j(device_t dev, const struct ed_product *pp)
{
int error, i, id;
char *ts;
struct ed_softc *sc = device_get_softc(dev);
if (!(pp->flags & NE2000DVF_TC5299J))
return (ENXIO);
if (bootverbose)
device_printf(dev, "Checking Tc5299j\n");
error = ed_probe_Novell_generic(dev, device_get_flags(dev));
if (bootverbose)
device_printf(dev, "probe novel returns %d\n", error);
if (error != 0)
return (error);
/*
* Check to see if we have a MII PHY ID at any address. All TC5299J
* devices have MII and a PHY, so we use this to weed out chips that
* would otherwise make it through the tests we have after this point.
*/
sc->mii_readbits = ed_pccard_tc5299j_mii_readbits;
sc->mii_writebits = ed_pccard_tc5299j_mii_writebits;
for (i = 0; i < 32; i++) {
id = ed_miibus_readreg(dev, i, MII_PHYIDR1);
if (id != 0 && id != 0xffff)
break;
}
if (i == 32) {
sc->mii_readbits = 0;
sc->mii_writebits = 0;
return (ENXIO);
}
ts = "TC5299J";
if (ed_pccard_rom_mac(dev, sc->enaddr) == 0) {
sc->mii_readbits = 0;
sc->mii_writebits = 0;
return (ENXIO);
}
sc->vendor = ED_VENDOR_NOVELL;
sc->type = ED_TYPE_NE2000;
sc->chip_type = ED_CHIP_TYPE_TC5299J;
sc->type_str = ts;
return (0);
}
static void
ed_pccard_tc5299j_mii_writebits(struct ed_softc *sc, u_int val, int nbits)
{
int i;
uint8_t cr, data;
/* Select page 3 */
cr = ed_nic_inb(sc, ED_P0_CR);
ed_nic_outb(sc, ED_P0_CR, cr | ED_CR_PAGE_3);
for (i = nbits - 1; i >= 0; i--) {
data = (val >> i) & 1 ? ED_TC5299J_MII_DATAOUT : 0;
ed_nic_outb(sc, ED_TC5299J_MIIBUS, data);
ed_nic_outb(sc, ED_TC5299J_MIIBUS, data | ED_TC5299J_MII_CLK);
}
ed_nic_outb(sc, ED_TC5299J_MIIBUS, 0);
/* Restore prior page */
ed_nic_outb(sc, ED_P0_CR, cr);
}
static u_int
ed_pccard_tc5299j_mii_readbits(struct ed_softc *sc, int nbits)
{
int i;
u_int val = 0;
uint8_t cr;
/* Select page 3 */
cr = ed_nic_inb(sc, ED_P0_CR);
ed_nic_outb(sc, ED_P0_CR, cr | ED_CR_PAGE_3);
ed_asic_outb(sc, ED_TC5299J_MIIBUS, ED_TC5299J_MII_DIROUT);
for (i = nbits - 1; i >= 0; i--) {
ed_nic_outb(sc, ED_TC5299J_MIIBUS,
ED_TC5299J_MII_CLK | ED_TC5299J_MII_DIROUT);
val <<= 1;
if (ed_nic_inb(sc, ED_TC5299J_MIIBUS) & ED_TC5299J_MII_DATAIN)
val++;
ed_nic_outb(sc, ED_TC5299J_MIIBUS, ED_TC5299J_MII_DIROUT);
}
/* Restore prior page */
ed_nic_outb(sc, ED_P0_CR, cr);
return val;
}
/*
* MII bus support routines.
*/
static int
ed_miibus_readreg(device_t dev, int phy, int reg)
{
struct ed_softc *sc;
int failed, val;
sc = device_get_softc(dev);
/*
* The AX88790 has an interesting quirk. It has an internal phy that
* needs a special bit set to access, but can also have additional
* external PHYs set for things like HomeNET media. When accessing
* the internal PHY, a bit has to be set, when accessing the external
* PHYs, it must be clear. See Errata 1, page 51, in the AX88790
* datasheet for more details.
*
* Also, PHYs above 16 appear to be phantoms on some cards, but not
* others. Registers read for this are often the same as prior values
* read. Filter all register requests to 17-31.
*
* I can't explain it, since I don't have the DL100xx data sheets, but
* the DL100xx chips do 13-bits before the 'ACK' but, but the AX88x90
* chips have 14. The linux pcnet and axnet drivers confirm this.
*/
if (sc->chip_type == ED_CHIP_TYPE_AX88790) {
if (phy > 0x10)
return (0);
if (phy == 0x10)
ed_asic_outb(sc, ED_AX88X90_GPIO,
ED_AX88X90_GPIO_INT_PHY);
else
ed_asic_outb(sc, ED_AX88X90_GPIO, 0);
}
(*sc->mii_writebits)(sc, 0xffffffff, 32);
(*sc->mii_writebits)(sc, ED_MII_STARTDELIM, ED_MII_STARTDELIM_BITS);
(*sc->mii_writebits)(sc, ED_MII_READOP, ED_MII_OP_BITS);
(*sc->mii_writebits)(sc, phy, ED_MII_PHY_BITS);
(*sc->mii_writebits)(sc, reg, ED_MII_REG_BITS);
if (sc->chip_type == ED_CHIP_TYPE_AX88790 ||
sc->chip_type == ED_CHIP_TYPE_AX88190)
(*sc->mii_readbits)(sc, ED_MII_ACK_BITS);
failed = (*sc->mii_readbits)(sc, ED_MII_ACK_BITS);
val = (*sc->mii_readbits)(sc, ED_MII_DATA_BITS);
(*sc->mii_writebits)(sc, ED_MII_IDLE, ED_MII_IDLE_BITS);
/* printf("Reading phy %d reg %#x returning %#x (valid %d)\n", phy, reg, val, !failed); */
return (failed ? 0 : val);
}
static int
ed_miibus_writereg(device_t dev, int phy, int reg, int data)
{
struct ed_softc *sc;
/* printf("Writing phy %d reg %#x data %#x\n", phy, reg, data); */
sc = device_get_softc(dev);
/* See ed_miibus_readreg for details */
if (sc->chip_type == ED_CHIP_TYPE_AX88790) {
if (phy > 0x10)
return (0);
if (phy == 0x10)
ed_asic_outb(sc, ED_AX88X90_GPIO,
ED_AX88X90_GPIO_INT_PHY);
else
ed_asic_outb(sc, ED_AX88X90_GPIO, 0);
}
(*sc->mii_writebits)(sc, 0xffffffff, 32);
(*sc->mii_writebits)(sc, ED_MII_STARTDELIM, ED_MII_STARTDELIM_BITS);
(*sc->mii_writebits)(sc, ED_MII_WRITEOP, ED_MII_OP_BITS);
(*sc->mii_writebits)(sc, phy, ED_MII_PHY_BITS);
(*sc->mii_writebits)(sc, reg, ED_MII_REG_BITS);
(*sc->mii_writebits)(sc, ED_MII_TURNAROUND, ED_MII_TURNAROUND_BITS);
(*sc->mii_writebits)(sc, data, ED_MII_DATA_BITS);
(*sc->mii_writebits)(sc, ED_MII_IDLE, ED_MII_IDLE_BITS);
return (0);
}
static int
ed_ifmedia_upd(struct ifnet *ifp)
{
struct ed_softc *sc;
int error;
sc = ifp->if_softc;
if (sc->miibus == NULL)
return (ENXIO);
ED_LOCK(sc);
error = ed_pccard_kick_phy(sc);
ED_UNLOCK(sc);
return (error);
}
static void
ed_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
{
struct ed_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
if (sc->miibus == NULL)
return;
mii = device_get_softc(sc->miibus);
mii_pollstat(mii);
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
}
static void
ed_child_detached(device_t dev, device_t child)
{
struct ed_softc *sc;
sc = device_get_softc(dev);
if (child == sc->miibus)
sc->miibus = NULL;
}
static void
ed_pccard_tick(struct ed_softc *sc)
{
struct mii_data *mii;
int media = 0;
ED_ASSERT_LOCKED(sc);
if (sc->miibus != NULL) {
mii = device_get_softc(sc->miibus);
media = mii->mii_media_status;
mii_tick(mii);
if (mii->mii_media_status & IFM_ACTIVE &&
media != mii->mii_media_status) {
if (sc->chip_type == ED_CHIP_TYPE_DL10022) {
ed_asic_outb(sc, ED_DL10022_DIAG,
(mii->mii_media_active & IFM_FDX) ?
ED_DL10022_COLLISON_DIS : 0);
#ifdef notyet
} else if (sc->chip_type == ED_CHIP_TYPE_DL10019) {
write_asic(sc, ED_DL10019_MAGIC,
(mii->mii_media_active & IFM_FDX) ?
DL19FDUPLX : 0);
#endif
}
}
}
}
static device_method_t ed_pccard_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ed_pccard_probe),
DEVMETHOD(device_attach, ed_pccard_attach),
DEVMETHOD(device_detach, ed_detach),
/* Bus interface */
DEVMETHOD(bus_child_detached, ed_child_detached),
/* MII interface */
DEVMETHOD(miibus_readreg, ed_miibus_readreg),
DEVMETHOD(miibus_writereg, ed_miibus_writereg),
{ 0, 0 }
};
static driver_t ed_pccard_driver = {
"ed",
ed_pccard_methods,
sizeof(struct ed_softc)
};
DRIVER_MODULE(ed, pccard, ed_pccard_driver, ed_devclass, 0, 0);
DRIVER_MODULE(miibus, ed, miibus_driver, miibus_devclass, 0, 0);
MODULE_DEPEND(ed, miibus, 1, 1, 1);
MODULE_DEPEND(ed, ether, 1, 1, 1);