0aeed3e993
Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
174 lines
7.7 KiB
C
174 lines
7.7 KiB
C
/* Copyright (c) 2008-2011 Freescale Semiconductor, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* * Neither the name of Freescale Semiconductor nor the
|
|
* names of its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
*
|
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") as published by the Free Software
|
|
* Foundation, either version 2 of that License or (at your option) any
|
|
* later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/**************************************************************************//**
|
|
|
|
@File memcpy_ext.h
|
|
|
|
@Description Efficient functions for copying and setting blocks of memory.
|
|
*//***************************************************************************/
|
|
|
|
#ifndef __MEMCPY_EXT_H
|
|
#define __MEMCPY_EXT_H
|
|
|
|
#include "std_ext.h"
|
|
|
|
|
|
/**************************************************************************//**
|
|
@Group etc_id Utility Library Application Programming Interface
|
|
|
|
@Description External routines.
|
|
|
|
@{
|
|
*//***************************************************************************/
|
|
|
|
/**************************************************************************//**
|
|
@Group mem_cpy Memory Copy
|
|
|
|
@Description Memory Copy module functions,definitions and enums.
|
|
|
|
@{
|
|
*//***************************************************************************/
|
|
|
|
/**************************************************************************//**
|
|
@Function MemCpy32
|
|
|
|
@Description Copies one memory buffer into another one in 4-byte chunks!
|
|
Which should be more efficient than byte by byte.
|
|
|
|
For large buffers (over 60 bytes) this function is about 4 times
|
|
more efficient than the trivial memory copy. For short buffers
|
|
it is reduced to the trivial copy and may be a bit worse.
|
|
|
|
@Param[in] pDst - The address of the destination buffer.
|
|
@Param[in] pSrc - The address of the source buffer.
|
|
@Param[in] size - The number of bytes that will be copied from pSrc to pDst.
|
|
|
|
@Return pDst (the address of the destination buffer).
|
|
|
|
@Cautions There is no parameter or boundary checking! It is up to the user
|
|
to supply non-null parameters as source & destination and size
|
|
that actually fits into the destination buffer.
|
|
*//***************************************************************************/
|
|
void * MemCpy32(void* pDst,void* pSrc, uint32_t size);
|
|
void * IO2IOCpy32(void* pDst,void* pSrc, uint32_t size);
|
|
void * IO2MemCpy32(void* pDst,void* pSrc, uint32_t size);
|
|
void * Mem2IOCpy32(void* pDst,void* pSrc, uint32_t size);
|
|
|
|
/**************************************************************************//**
|
|
@Function MemCpy64
|
|
|
|
@Description Copies one memory buffer into another one in 8-byte chunks!
|
|
Which should be more efficient than byte by byte.
|
|
|
|
For large buffers (over 60 bytes) this function is about 8 times
|
|
more efficient than the trivial memory copy. For short buffers
|
|
it is reduced to the trivial copy and may be a bit worse.
|
|
|
|
Some testing suggests that MemCpy32() preforms better than
|
|
MemCpy64() over small buffers. On average they break even at
|
|
100 byte buffers. For buffers larger than that MemCpy64 is
|
|
superior.
|
|
|
|
@Param[in] pDst - The address of the destination buffer.
|
|
@Param[in] pSrc - The address of the source buffer.
|
|
@Param[in] size - The number of bytes that will be copied from pSrc to pDst.
|
|
|
|
@Return pDst (the address of the destination buffer).
|
|
|
|
@Cautions There is no parameter or boundary checking! It is up to the user
|
|
to supply non null parameters as source & destination and size
|
|
that actually fits into their buffer.
|
|
|
|
Do not use under Linux.
|
|
*//***************************************************************************/
|
|
void * MemCpy64(void* pDst,void* pSrc, uint32_t size);
|
|
|
|
/**************************************************************************//**
|
|
@Function MemSet32
|
|
|
|
@Description Sets all bytes of a memory buffer to a specific value, in
|
|
4-byte chunks.
|
|
|
|
@Param[in] pDst - The address of the destination buffer.
|
|
@Param[in] val - Value to set destination bytes to.
|
|
@Param[in] size - The number of bytes that will be set to val.
|
|
|
|
@Return pDst (the address of the destination buffer).
|
|
|
|
@Cautions There is no parameter or boundary checking! It is up to the user
|
|
to supply non null parameter as destination and size
|
|
that actually fits into the destination buffer.
|
|
*//***************************************************************************/
|
|
void * MemSet32(void* pDst, uint8_t val, uint32_t size);
|
|
void * IOMemSet32(void* pDst, uint8_t val, uint32_t size);
|
|
|
|
/**************************************************************************//**
|
|
@Function MemSet64
|
|
|
|
@Description Sets all bytes of a memory buffer to a specific value, in
|
|
8-byte chunks.
|
|
|
|
@Param[in] pDst - The address of the destination buffer.
|
|
@Param[in] val - Value to set destination bytes to.
|
|
@Param[in] size - The number of bytes that will be set to val.
|
|
|
|
@Return pDst (the address of the destination buffer).
|
|
|
|
@Cautions There is no parameter or boundary checking! It is up to the user
|
|
to supply non null parameter as destination and size
|
|
that actually fits into the destination buffer.
|
|
*//***************************************************************************/
|
|
void * MemSet64(void* pDst, uint8_t val, uint32_t size);
|
|
|
|
/**************************************************************************//**
|
|
@Function MemDisp
|
|
|
|
@Description Displays a block of memory in chunks of 32 bits.
|
|
|
|
@Param[in] addr - The address of the memory to display.
|
|
@Param[in] size - The number of bytes that will be displayed.
|
|
|
|
@Return None.
|
|
|
|
@Cautions There is no parameter or boundary checking! It is up to the user
|
|
to supply non null parameter as destination and size
|
|
that actually fits into the destination buffer.
|
|
*//***************************************************************************/
|
|
void MemDisp(uint8_t *addr, int size);
|
|
|
|
/** @} */ /* end of mem_cpy group */
|
|
/** @} */ /* end of etc_id group */
|
|
|
|
|
|
#endif /* __MEMCPY_EXT_H */
|