freebsd-dev/crypto/openssh/auth1.c
Dag-Erling Smørgrav aa49c9264c Resolve conflicts.
2005-06-05 15:46:09 +00:00

364 lines
9.1 KiB
C

/*
* Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
* All rights reserved
*
* As far as I am concerned, the code I have written for this software
* can be used freely for any purpose. Any derived versions of this
* software must be clearly marked as such, and if the derived work is
* incompatible with the protocol description in the RFC file, it must be
* called by a name other than "ssh" or "Secure Shell".
*/
#include "includes.h"
RCSID("$OpenBSD: auth1.c,v 1.59 2004/07/28 09:40:29 markus Exp $");
RCSID("$FreeBSD$");
#include "xmalloc.h"
#include "rsa.h"
#include "ssh1.h"
#include "packet.h"
#include "buffer.h"
#include "log.h"
#include "servconf.h"
#include "compat.h"
#include "auth.h"
#include "channels.h"
#include "session.h"
#include "uidswap.h"
#include "monitor_wrap.h"
#include "buffer.h"
/* import */
extern ServerOptions options;
extern Buffer loginmsg;
/*
* convert ssh auth msg type into description
*/
static char *
get_authname(int type)
{
static char buf[1024];
switch (type) {
case SSH_CMSG_AUTH_PASSWORD:
return "password";
case SSH_CMSG_AUTH_RSA:
return "rsa";
case SSH_CMSG_AUTH_RHOSTS_RSA:
return "rhosts-rsa";
case SSH_CMSG_AUTH_RHOSTS:
return "rhosts";
case SSH_CMSG_AUTH_TIS:
case SSH_CMSG_AUTH_TIS_RESPONSE:
return "challenge-response";
}
snprintf(buf, sizeof buf, "bad-auth-msg-%d", type);
return buf;
}
/*
* read packets, try to authenticate the user and
* return only if authentication is successful
*/
static void
do_authloop(Authctxt *authctxt)
{
int authenticated = 0;
u_int bits;
Key *client_host_key;
BIGNUM *n;
char *client_user, *password;
char info[1024];
u_int dlen;
u_int ulen;
int prev, type = 0;
debug("Attempting authentication for %s%.100s.",
authctxt->valid ? "" : "invalid user ", authctxt->user);
/* If the user has no password, accept authentication immediately. */
if (options.password_authentication &&
#ifdef KRB5
(!options.kerberos_authentication || options.kerberos_or_local_passwd) &&
#endif
PRIVSEP(auth_password(authctxt, ""))) {
#ifdef USE_PAM
if (options.use_pam && (PRIVSEP(do_pam_account())))
#endif
{
auth_log(authctxt, 1, "without authentication", "");
return;
}
}
/* Indicate that authentication is needed. */
packet_start(SSH_SMSG_FAILURE);
packet_send();
packet_write_wait();
client_user = NULL;
for (;;) {
/* default to fail */
authenticated = 0;
info[0] = '\0';
/* Get a packet from the client. */
prev = type;
type = packet_read();
/*
* If we started challenge-response authentication but the
* next packet is not a response to our challenge, release
* the resources allocated by get_challenge() (which would
* normally have been released by verify_response() had we
* received such a response)
*/
if (prev == SSH_CMSG_AUTH_TIS &&
type != SSH_CMSG_AUTH_TIS_RESPONSE)
abandon_challenge_response(authctxt);
/* Process the packet. */
switch (type) {
case SSH_CMSG_AUTH_RHOSTS_RSA:
if (!options.rhosts_rsa_authentication) {
verbose("Rhosts with RSA authentication disabled.");
break;
}
/*
* Get client user name. Note that we just have to
* trust the client; root on the client machine can
* claim to be any user.
*/
client_user = packet_get_string(&ulen);
/* Get the client host key. */
client_host_key = key_new(KEY_RSA1);
bits = packet_get_int();
packet_get_bignum(client_host_key->rsa->e);
packet_get_bignum(client_host_key->rsa->n);
if (bits != BN_num_bits(client_host_key->rsa->n))
verbose("Warning: keysize mismatch for client_host_key: "
"actual %d, announced %d",
BN_num_bits(client_host_key->rsa->n), bits);
packet_check_eom();
authenticated = auth_rhosts_rsa(authctxt, client_user,
client_host_key);
key_free(client_host_key);
snprintf(info, sizeof info, " ruser %.100s", client_user);
break;
case SSH_CMSG_AUTH_RSA:
if (!options.rsa_authentication) {
verbose("RSA authentication disabled.");
break;
}
/* RSA authentication requested. */
if ((n = BN_new()) == NULL)
fatal("do_authloop: BN_new failed");
packet_get_bignum(n);
packet_check_eom();
authenticated = auth_rsa(authctxt, n);
BN_clear_free(n);
break;
case SSH_CMSG_AUTH_PASSWORD:
if (!options.password_authentication) {
verbose("Password authentication disabled.");
break;
}
/*
* Read user password. It is in plain text, but was
* transmitted over the encrypted channel so it is
* not visible to an outside observer.
*/
password = packet_get_string(&dlen);
packet_check_eom();
/* Try authentication with the password. */
authenticated = PRIVSEP(auth_password(authctxt, password));
memset(password, 0, strlen(password));
xfree(password);
break;
case SSH_CMSG_AUTH_TIS:
debug("rcvd SSH_CMSG_AUTH_TIS");
if (options.challenge_response_authentication == 1) {
char *challenge = get_challenge(authctxt);
if (challenge != NULL) {
debug("sending challenge '%s'", challenge);
packet_start(SSH_SMSG_AUTH_TIS_CHALLENGE);
packet_put_cstring(challenge);
xfree(challenge);
packet_send();
packet_write_wait();
continue;
}
}
break;
case SSH_CMSG_AUTH_TIS_RESPONSE:
debug("rcvd SSH_CMSG_AUTH_TIS_RESPONSE");
if (options.challenge_response_authentication == 1) {
char *response = packet_get_string(&dlen);
packet_check_eom();
authenticated = verify_response(authctxt, response);
memset(response, 'r', dlen);
xfree(response);
}
break;
default:
/*
* Any unknown messages will be ignored (and failure
* returned) during authentication.
*/
logit("Unknown message during authentication: type %d", type);
break;
}
#ifdef BSD_AUTH
if (authctxt->as) {
auth_close(authctxt->as);
authctxt->as = NULL;
}
#endif
if (!authctxt->valid && authenticated)
fatal("INTERNAL ERROR: authenticated invalid user %s",
authctxt->user);
#ifdef _UNICOS
if (authenticated && cray_access_denied(authctxt->user)) {
authenticated = 0;
fatal("Access denied for user %s.",authctxt->user);
}
#endif /* _UNICOS */
#ifdef HAVE_CYGWIN
if (authenticated &&
!check_nt_auth(type == SSH_CMSG_AUTH_PASSWORD,
authctxt->pw)) {
packet_disconnect("Authentication rejected for uid %d.",
authctxt->pw == NULL ? -1 : authctxt->pw->pw_uid);
authenticated = 0;
}
#else
/* Special handling for root */
if (authenticated && authctxt->pw->pw_uid == 0 &&
!auth_root_allowed(get_authname(type))) {
authenticated = 0;
# ifdef SSH_AUDIT_EVENTS
PRIVSEP(audit_event(SSH_LOGIN_ROOT_DENIED));
# endif
}
#endif
#ifdef USE_PAM
if (options.use_pam && authenticated &&
!PRIVSEP(do_pam_account())) {
char *msg;
size_t len;
error("Access denied for user %s by PAM account "
"configuration", authctxt->user);
len = buffer_len(&loginmsg);
buffer_append(&loginmsg, "\0", 1);
msg = buffer_ptr(&loginmsg);
/* strip trailing newlines */
if (len > 0)
while (len > 0 && msg[--len] == '\n')
msg[len] = '\0';
else
msg = "Access denied.";
packet_disconnect(msg);
}
#endif
/* Log before sending the reply */
auth_log(authctxt, authenticated, get_authname(type), info);
if (client_user != NULL) {
xfree(client_user);
client_user = NULL;
}
if (authenticated)
return;
if (authctxt->failures++ > options.max_authtries) {
#ifdef SSH_AUDIT_EVENTS
PRIVSEP(audit_event(SSH_LOGIN_EXCEED_MAXTRIES));
#endif
packet_disconnect(AUTH_FAIL_MSG, authctxt->user);
}
packet_start(SSH_SMSG_FAILURE);
packet_send();
packet_write_wait();
}
}
/*
* Performs authentication of an incoming connection. Session key has already
* been exchanged and encryption is enabled.
*/
void
do_authentication(Authctxt *authctxt)
{
u_int ulen;
char *user, *style = NULL;
/* Get the name of the user that we wish to log in as. */
packet_read_expect(SSH_CMSG_USER);
/* Get the user name. */
user = packet_get_string(&ulen);
packet_check_eom();
if ((style = strchr(user, ':')) != NULL)
*style++ = '\0';
authctxt->user = user;
authctxt->style = style;
/* Verify that the user is a valid user. */
if ((authctxt->pw = PRIVSEP(getpwnamallow(user))) != NULL)
authctxt->valid = 1;
else {
debug("do_authentication: invalid user %s", user);
authctxt->pw = fakepw();
}
setproctitle("%s%s", authctxt->valid ? user : "unknown",
use_privsep ? " [net]" : "");
#ifdef USE_PAM
if (options.use_pam)
PRIVSEP(start_pam(authctxt));
#endif
/*
* If we are not running as root, the user must have the same uid as
* the server. (Unless you are running Windows)
*/
#ifndef HAVE_CYGWIN
if (!use_privsep && getuid() != 0 && authctxt->pw &&
authctxt->pw->pw_uid != getuid())
packet_disconnect("Cannot change user when server not running as root.");
#endif
/*
* Loop until the user has been authenticated or the connection is
* closed, do_authloop() returns only if authentication is successful
*/
do_authloop(authctxt);
/* The user has been authenticated and accepted. */
packet_start(SSH_SMSG_SUCCESS);
packet_send();
packet_write_wait();
}