freebsd-dev/sys/i386/isa/bs/bshw.c
2000-10-15 14:19:01 +00:00

453 lines
11 KiB
C

/* $NecBSD: bshw.c,v 1.1 1997/07/18 09:19:03 kmatsuda Exp $ */
/*
* [NetBSD for NEC PC98 series]
* Copyright (c) 1994, 1995, 1996 NetBSD/pc98 porting staff.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1994, 1995, 1996 Naofumi HONDA. All rights reserved.
*
* $FreeBSD$
*/
#ifdef __NetBSD__
#include <dev/isa/isadmareg.h>
#include <i386/Cbus/dev/bs/bsif.h>
#include <i386/Cbus/dev/bs/bshw.lst>
#endif
#ifdef __FreeBSD__
#include "opt_pc98.h"
#include <i386/isa/ic/i8237.h>
#include <i386/isa/bs/bsif.h>
#include <i386/isa/bs/bshw.lst>
#include <sys/cons.h>
#endif
static struct bs_softc *gbsc;
/**************************************************
* DECLARATION
**************************************************/
static void bshw_force_bsmode __P((struct bs_softc *));
/**************************************************
* STATIC VAL
**************************************************/
static int irq_tbl[] = { 3, 5, 6, 9, 12, 13 };
/**************************************************
* SCSI CMD BRANCH
**************************************************/
#define RS (BSSAT | BSSMIT | BSLINK | BSREAD)
#define WS (BSSAT | BSSMIT | BSLINK)
#define EOK (BSERROROK)
u_int8_t bshw_cmd[256] = {
/* 0 1 2 3 4 5 6 7 8 9 A B C E D F */
/*0*/0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,RS ,0 ,WS ,0 ,0 ,0 ,0 ,0 ,
/*1*/0 ,0 ,EOK,0 ,0 ,0 ,0 ,0 ,0 ,0 ,EOK,0 ,0 ,0 ,0 ,0 ,
/*2*/0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,RS ,0 ,WS ,0 ,0 ,0 ,0 ,0 ,
/*3*/0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,
/*4*/0 ,0 ,EOK,EOK,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,
/*5*/0 ,0 ,0 ,0 ,EOK,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,
/*6*/0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,
/*7*/0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,
/*8*/0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,
/*9*/0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,
/*A*/0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,
/*B*/0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,
/*C*/0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,
/*D*/0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,
/*E*/0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,
/*F*/0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,
};
#undef RS
#undef WS
#undef EOK
/**********************************************
* init
**********************************************/
static void
bshw_force_bsmode(bsc)
struct bs_softc *bsc;
{
if (bsc->sc_flags & BSBSMODE)
return;
bsc->sc_flags |= BSBSMODE;
/*
* If you have memory over 16M, some stupid boards always force to
* use the io polling mode. Check such a case and change mode into
* bus master DMA. However this depends heavily on the board's
* specifications!
*/
if (bsc->sc_hw->dma_init && ((*bsc->sc_hw->dma_init)(bsc)))
printf("%s change mode using external DMA (%x)\n",
bsc->sc_dvname, (u_int)read_wd33c93(bsc, 0x37));
}
#define RESET_DEFAULT 2000
int
bshw_chip_reset(bsc)
struct bs_softc *bsc;
{
int ct;
u_int8_t aux;
bshw_lock(bsc);
bshw_abort_cmd(bsc);
delay(10000);
bshw_get_auxstat(bsc);
bshw_get_busstat(bsc);
write_wd33c93(bsc, wd3s_oid, IDR_EHP | bsc->sc_cspeed | bsc->sc_hostid);
write_wd33c93(bsc, wd3s_cmd, WD3S_RESET);
for (ct = RESET_DEFAULT; ct > 0; ct--)
{
aux = bshw_get_auxstat(bsc);
if (aux != 0xff && (aux & STR_INT))
{
if (bshw_get_busstat(bsc) == 0)
break;
write_wd33c93(bsc, wd3s_cmd, WD3S_RESET);
}
delay(1);
}
if (ct == 0)
{
bshw_unlock(bsc);
return ENXIO;
}
bshw_force_bsmode(bsc);
write_wd33c93(bsc, wd3s_tout, BSHW_SEL_TIMEOUT);
write_wd33c93(bsc, wd3s_sid, SIDR_RESEL);
bsc->sc_flags |= BSDMATRANSFER;
write_wd33c93(bsc, wd3s_ctrl, CR_DEFAULT);
write_wd33c93(bsc, wd3s_synch, 0);
bshw_get_auxstat(bsc);
bsc->sc_busstat = bshw_get_busstat(bsc);
bshw_unlock(bsc);
return 0;
}
/* scsi bus hard reset */
#define TWIDDLEWAIT 10000
static int tw_pos;
static char tw_chars[] = "|/-\\";
/* this is some jokes */
static void
twiddle_wait(void)
{
cnputc('\b');
cnputc(tw_chars[tw_pos++]);
tw_pos %= (sizeof(tw_chars) - 1);
delay(TWIDDLEWAIT);
}
static void bshw_set_vsp __P((struct bs_softc *, u_int, u_int8_t));
static void
bshw_set_vsp(bsc, chan, spva)
struct bs_softc *bsc;
u_int chan;
u_int8_t spva;
{
struct bshw *hw = bsc->sc_hw;
if (hw->sregaddr == 0)
return;
write_wd33c93(bsc, hw->sregaddr + chan, spva);
if (hw->hw_flags & BSHW_DOUBLE_DMACHAN)
write_wd33c93(bsc, hw->sregaddr + chan + 8, spva);
}
void
bshw_bus_reset(bsc)
struct bs_softc *bsc;
{
struct targ_info *ti;
int i, lpc;
if (bsc->sc_RSTdelay == 0)
bsc->sc_RSTdelay = 6 * 1000 * 1000;
else
{
/* XXX:
* second time reset will be requested by hardware failuer.
*/
bsc->sc_RSTdelay = 12 * 1000 * 1000;
}
bshw_lock(bsc);
write_wd33c93(bsc, wd3s_mbank, (bsc->sc_membank | MBR_RST) & ~MBR_IEN);
delay(500000);
write_wd33c93(bsc, wd3s_mbank, (bsc->sc_membank) & ~MBR_IEN);
bshw_unlock(bsc);
for (lpc = 0; lpc < 2; lpc ++)
{
cnputc(' ');
for (i = 0; i <= bsc->sc_RSTdelay / TWIDDLEWAIT; i++)
twiddle_wait();
cnputc('\b');
(void) read_wd33c93(bsc, wd3s_auxc);
delay(10000);
if ((read_wd33c93(bsc, wd3s_auxc) & AUXCR_RRST) == 0)
break;
printf("\nreset state still continue, wait ...");
}
for (i = 0; i < NTARGETS; i++)
{
if ((ti = bsc->sc_ti[i]) != NULL)
{
ti->ti_sync = 0;
bshw_set_vsp(bsc, i, 0);
}
}
}
/* probe */
int
bshw_board_probe(bsc, drq, irq)
struct bs_softc *bsc;
u_int *drq;
u_int *irq;
{
gbsc = bsc;
#ifdef SHOW_PORT
bshw_print_port(bsc);
#endif /* SHOW_PORT */
bsc->sc_hostid = (read_wd33c93(bsc, wd3s_auxc) & AUXCR_HIDM);
if ((*irq) == IRQUNK)
*irq = irq_tbl[(read_wd33c93(bsc, wd3s_auxc) >> 3) & 7];
if ((*drq) == DRQUNK)
*drq = BUS_IOR(cmd_port) & 3;
bsc->sc_dmachan = *drq;
bsc->sc_irq = (*irq);
bsc->sc_membank = read_wd33c93(bsc, wd3s_mbank);
bsc->sc_membank &= ~MBR_RST;
bsc->sc_membank |= MBR_IEN;
bsc->sc_cspeed = (read_wd33c93(bsc, wd3s_oid) & (~IDR_IDM));
switch (BSC_CHIP_CLOCK(bsc->sc_cfgflags))
{
case 0:
break;
case 1:
bsc->sc_cspeed &= ~(IDR_FS_12_15 | IDR_FS_15_20);
break;
case 2:
bsc->sc_cspeed &= ~(IDR_FS_12_15 | IDR_FS_15_20);
bsc->sc_cspeed |= IDR_FS_12_15;
break;
case 3:
bsc->sc_cspeed &= ~(IDR_FS_12_15 | IDR_FS_15_20);
bsc->sc_cspeed |= IDR_FS_15_20;
break;
}
/* XXX: host id fixed(7) */
bsc->sc_hostid = 7;
if (bshw_chip_reset(bsc))
return ENXIO;
return 0;
}
/*
* XXX:
* Assume the board clock rate must be 20Mhz (always satisfied, maybe)!
* Only 10M/s 6.6M/s 5.0M/s 3.3M/s for synchronus transfer speed set.
*/
#define ILLEGAL_SYNCH
#ifdef ILLEGAL_SYNCH
/* A 10 6.6 5.0 4.0 3.3 2.8 2.5 2.0 M/s */
/* X 100 150 200 250 300 350 400 500 ns */
static u_int bshw_scsi_period[] =
{0, 25, 37, 50, 62, 75, 87, 100, 125};
static u_int8_t bshw_chip_pval[] =
{0, 0xa0, 0xb0, 0x20, 0xd0, 0x30, 0xf0, 0x40, 0x50};
#else /* !ILLEGAL_SYNCH */
/* A 10 6.6 5.0 3.3 2.5 M/s */
/* X 100 150 200 300 400 ns */
static u_int bshw_scsi_period[] =
{0, 25, 37, 50, 75, 100};
static u_int8_t bshw_chip_pval[] =
{0, 0xa0, 0xb0, 0x20, 0x30, 0x40};
#endif /* !ILLEGAL_SYNCH */
void
bshw_adj_syncdata(sdp)
struct syncdata *sdp;
{
int i;
if (sdp->offset == 0 || sdp->period < 25 || sdp->period > 100)
sdp->offset = sdp->period = 0;
else
{
for (i = 0; sdp->period > bshw_scsi_period[i] + 2; i ++)
;
sdp->period = bshw_scsi_period[i];
}
}
void
bshw_set_synchronous(bsc, ti)
struct bs_softc *bsc;
struct targ_info *ti;
{
struct syncdata sd;
int i;
sd = ti->ti_syncnow;
bshw_adj_syncdata(&sd);
for (i = 0; sd.period != bshw_scsi_period[i]; i++)
;
ti->ti_sync = ((sd.offset & 0x0f) | bshw_chip_pval[i]);
bshw_set_vsp(bsc, ti->ti_id, ti->ti_sync);
if (bsc->sc_nexus == ti)
bshw_set_sync_reg(bsc, ti->ti_sync);
}
/* ctrl reg */
void
bshw_setup_ctrl_reg(bsc, flags)
struct bs_softc *bsc;
u_int flags;
{
u_int8_t regval;
regval = (flags & BS_SCSI_NOPARITY) ? CR_DEFAULT : CR_DEFAULT_HP;
if (bsc->sc_flags & BSDMATRANSFER)
regval |= CR_DMA;
write_wd33c93(bsc, wd3s_ctrl, regval);
}
/* sat command */
void
bshw_issue_satcmd(bsc, cb, link)
struct bs_softc *bsc;
struct bsccb *cb;
int link;
{
int i;
BUS_IOW(addr_port, wd3s_cdb);
for (i = 0; i < cb->cmdlen - 1; i++)
BUS_IOW(ctrl_port, cb->cmd[i]);
BUS_IOW(ctrl_port, cb->cmd[i] | (link ? 1 : 0));
}
/* lock */
void
bshw_lock(bsc)
struct bs_softc *bsc;
{
bsc->sc_hwlock++;
write_wd33c93(bsc, wd3s_mbank, bsc->sc_membank & (~MBR_IEN));
}
void
bshw_unlock(bsc)
struct bs_softc *bsc;
{
if ((--bsc->sc_hwlock) <= 0)
write_wd33c93(bsc, wd3s_mbank, bsc->sc_membank);
}
/**********************************************
* DMA OPERATIONS
**********************************************/
#ifdef __NetBSD__
#include <i386/Cbus/dev/bs/bshw_dma.c>
#include <i386/Cbus/dev/bs/bshw_pdma.c>
#endif
#ifdef __FreeBSD__
#include <i386/isa/bs/bshw_dma.c>
#include <i386/isa/bs/bshw_pdma.c>
#endif
/**********************************************
* DEBUG
**********************************************/
/* misc */
void
bshw_print_port(bsc)
struct bs_softc * bsc;
{
int i, j;
int port = 0x0;
if (bsc == NULL)
bsc = gbsc;
printf("\n");
for (j = 0; j <= 0x70; j += 0x10)
{
printf("port %x: ", port);
for (i = 0; i < 0x10; i++)
printf("%x ", (u_int) read_wd33c93(bsc, port++));
printf("\n");
}
}