..
ar953x.ini
add missing initvals.
2015-11-29 18:14:18 +00:00
ar955x.ini
ar9300_aic.c
ar9300_ani.c
[ath_hal_ar9300] Add some comments around the AR9300 ANI code.
2019-03-19 00:07:12 +00:00
ar9300_aphrodite10.ini
ar9300_attach.c
[ath_hal] quieten a bit of the boot messages - this stuff has been working for a while.
2016-09-12 04:58:59 +00:00
ar9300_beacon.c
ar9300_devid.h
Renumber copyright clause 4
2017-02-28 23:42:47 +00:00
ar9300_eeprom.c
Fix improper use of "its".
2016-11-08 23:59:41 +00:00
ar9300_freebsd_inc.h
[ath_hal] migrate the bluetooth definitions out from ah.h / ar9300_freebsd_inc.h.
2016-05-31 04:44:00 +00:00
ar9300_freebsd.c
[ath] [ath_hal] [ath_hal_9300] Extend the start PCU receive to handle resetting ANI.
2019-04-21 02:36:01 +00:00
ar9300_freebsd.h
ath(4): begin fleshing out a "reset type" extension to force cold/warn resets.
2015-11-09 15:59:42 +00:00
ar9300_gpio.c
ar9300_interrupts.c
[ath_hal] add extra debugging for MCI interrupts.
2016-06-01 03:17:36 +00:00
ar9300_jupiter10.ini
ar9300_jupiter20.ini
ar9300_keycache.c
ar9300_mci.c
[ath_hal] convert the MCI code over to work on Jupiter 2.1.
2016-06-05 02:15:29 +00:00
ar9300_misc.c
[ath_hal_ar9300] Add the missing bits from the previous HAL commit.
2019-03-06 08:52:02 +00:00
ar9300_osprey22_scoemu.ini
ar9300_osprey22.ini
ar9300_paprd.c
ar9300_phy.c
ar9300_power.c
ar9300_radar.c
[ath_hal] [ar9300] initial radar detection glue.
2017-02-02 09:19:57 +00:00
ar9300_radio.c
Fix the build
2015-11-30 08:02:52 +00:00
ar9300_raw_adc_capture.c
ar9300_recv_ds.c
[ath_hal] add locationing / tx-beamforming RX status descriptor decoding.
2016-07-08 22:39:37 +00:00
ar9300_recv.c
Add initial support for the QCA953x SoC (honeybee) wifi.
2015-11-29 05:47:52 +00:00
ar9300_reset.c
[ath_hal] Return failure if noise floor calibration fails.
2018-06-08 18:21:57 +00:00
ar9300_rtt.c
ar9300_sim.c
ar9300_sim.h
ar9300_spectral.c
[ath_hal] [ar9300] initial hacks to make spectral scan working on AR9380 and later NICs.
2017-02-02 05:29:22 +00:00
ar9300_stub_funcs.c
[ath] [ath_hal] [ath_hal_9300] Extend the start PCU receive to handle resetting ANI.
2019-04-21 02:36:01 +00:00
ar9300_stub_funcs.h
[ath] [ath_hal] [ath_hal_9300] Extend the start PCU receive to handle resetting ANI.
2019-04-21 02:36:01 +00:00
ar9300_stub.c
ar9300_stub.h
ar9300_timer.c
ar9300_tx99_tgt.c
ar9300_txbf_cal.c
ar9300_txbf.c
ar9300_txbf.h
ar9300_xmit_ds.c
athhal: disable unused function (big endian only)
2019-08-21 10:42:31 +00:00
ar9300_xmit.c
[ar9300] don't program a negative readytime.
2016-08-09 01:05:29 +00:00
ar9300.h
[ath_hal] migrate the shared HAL_RESET_* pieces out into ath_hal.
2018-05-25 01:27:39 +00:00
ar9300desc.h
ar9300eep.h
Quiesce a couple pages of clang warnings with a cast. Duplicates
2018-05-18 17:23:23 +00:00
ar9300paprd.h
ar9300phy.h
[ath_hal] [ar9300] initial radar detection glue.
2017-02-02 09:19:57 +00:00
ar9300radar.h
ar9300reg.h
[ath_hal] add a _S so FSP (frame scheduling policy) can be set/read via SM/MS macros.
2016-06-08 16:21:38 +00:00
ar9300template_ap121.h
ar9300template_aphrodite.h
ar9300template_cus157.h
ar9300template_generic.h
ar9300template_hb112.h
ar9300template_hb116.h
ar9300template_osprey_k31.h
ar9300template_wasp_2.h
ar9300template_wasp_k31.h
ar9300template_xb112.h
ar9300template_xb113.h
ar9330_11.ini
ar9330_12.ini
ar9340.ini
ar9462_2p0_initvals.h
[ath_hal] Make the AR9462 2.0 initvals from ath9k compile.
2016-06-05 01:42:37 +00:00
ar9462_2p1_initvals.h
u32 -> uint32_t.
2015-11-29 05:42:18 +00:00
ar9485_1_1.ini
ar9485.ini
ar9580.ini
eeprom.diff
osprey_reg_map_macro.h
osprey_reg_map.h
poseidon_reg_map_macro.h
scorpion_reg_map_macro.h
scorpion_reg_map.h
sources
wasp_reg_map.h
