freebsd-dev/sys/dev/ray/if_raymib.h
Duncan Barclay aadc434b25 Use ssid length from 80211.h
moved and extended ioctl's

added string and size definitions for raycontrol
2000-03-12 22:51:33 +00:00

674 lines
20 KiB
C

/*
* Copyright (C) 2000
* Dr. Duncan McLennan Barclay, dmlb@ragnet.demon.co.uk.
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY DUNCAN BARCLAY AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL DUNCAN BARCLAY OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: if_raymib.h,v 1.1 2000/02/27 19:47:06 dmlb Exp $
*
*/
struct ray_mib_common_head { /*Offset*/ /*Size*/
u_int8_t mib_net_type; /*00*/
u_int8_t mib_ap_status; /*01*/
u_int8_t mib_ssid[IEEE80211_NWID_LEN]; /*02*/ /*20*/
u_int8_t mib_scan_mode; /*22*/
u_int8_t mib_apm_mode; /*23*/
u_int8_t mib_mac_addr[ETHER_ADDR_LEN]; /*24*/ /*06*/
u_int8_t mib_frag_thresh[2]; /*2a*/ /*02*/
u_int8_t mib_dwell_time[2]; /*2c*/ /*02*/
u_int8_t mib_beacon_period[2]; /*2e*/ /*02*/
u_int8_t mib_dtim_interval; /*30*/
u_int8_t mib_max_retry; /*31*/
u_int8_t mib_ack_timo; /*32*/
u_int8_t mib_sifs; /*33*/
u_int8_t mib_difs; /*34*/
u_int8_t mib_pifs; /*35*/
u_int8_t mib_rts_thresh[2]; /*36*/ /*02*/
u_int8_t mib_scan_dwell[2]; /*38*/ /*02*/
u_int8_t mib_scan_max_dwell[2]; /*3a*/ /*02*/
u_int8_t mib_assoc_timo; /*3c*/
u_int8_t mib_adhoc_scan_cycle; /*3d*/
u_int8_t mib_infra_scan_cycle; /*3e*/
u_int8_t mib_infra_super_scan_cycle; /*3f*/
u_int8_t mib_promisc; /*40*/
u_int8_t mib_uniq_word[2]; /*41*/ /*02*/
u_int8_t mib_slot_time; /*43*/
u_int8_t mib_roam_low_snr_thresh; /*44*/
u_int8_t mib_low_snr_count; /*45*/
u_int8_t mib_infra_missed_beacon_count; /*46*/
u_int8_t mib_adhoc_missed_beacon_count; /*47*/
u_int8_t mib_country_code; /*48*/
u_int8_t mib_hop_seq; /*49*/
u_int8_t mib_hop_seq_len; /*4a*/
} __attribute__((__packed__));
struct ray_mib_common_tail {
u_int8_t mib_noise_filter_gain; /*00*/
u_int8_t mib_noise_limit_offset; /*01*/
u_int8_t mib_rssi_thresh_offset; /*02*/
u_int8_t mib_busy_thresh_offset; /*03*/
u_int8_t mib_sync_thresh; /*04*/
u_int8_t mib_test_mode; /*05*/
u_int8_t mib_test_min_chan; /*06*/
u_int8_t mib_test_max_chan; /*07*/
} __attribute__((__packed__));
struct ray_mib_4 {
struct ray_mib_common_head mib_head; /*00*/
u_int8_t mib_cw_max; /*4b*/
u_int8_t mib_cw_min; /*4c*/
struct ray_mib_common_tail mib_tail; /*4d*/
} __attribute__((__packed__));
struct ray_mib_5 {
struct ray_mib_common_head mib_head; /*00*/
u_int8_t mib_cw_max[2]; /*4b*/ /*02*/
u_int8_t mib_cw_min[2]; /*4d*/ /*02*/
struct ray_mib_common_tail mib_tail; /*4f*/
u_int8_t mib_allow_probe_resp; /*57*/
u_int8_t mib_privacy_must_start; /*58*/
u_int8_t mib_privacy_can_join; /*59*/
u_int8_t mib_basic_rate_set[8]; /*5a*/ /*08*/
} __attribute__((__packed__));
#define mib_net_type mib_head.mib_net_type
#define mib_ap_status mib_head.mib_ap_status
#define mib_ssid mib_head.mib_ssid
#define mib_scan_mode mib_head.mib_scan_mode
#define mib_apm_mode mib_head.mib_apm_mode
#define mib_mac_addr mib_head.mib_mac_addr
#define mib_frag_thresh mib_head.mib_frag_thresh
#define mib_dwell_time mib_head.mib_dwell_time
#define mib_beacon_period mib_head.mib_beacon_period
#define mib_dtim_interval mib_head.mib_dtim_interval
#define mib_max_retry mib_head.mib_max_retry
#define mib_ack_timo mib_head.mib_ack_timo
#define mib_sifs mib_head.mib_sifs
#define mib_difs mib_head.mib_difs
#define mib_pifs mib_head.mib_pifs
#define mib_rts_thresh mib_head.mib_rts_thresh
#define mib_scan_dwell mib_head.mib_scan_dwell
#define mib_scan_max_dwell mib_head.mib_scan_max_dwell
#define mib_assoc_timo mib_head.mib_assoc_timo
#define mib_adhoc_scan_cycle mib_head.mib_adhoc_scan_cycle
#define mib_infra_scan_cycle mib_head.mib_infra_scan_cycle
#define mib_infra_super_scan_cycle \
mib_head.mib_infra_super_scan_cycle
#define mib_promisc mib_head.mib_promisc
#define mib_uniq_word mib_head.mib_uniq_word
#define mib_slot_time mib_head.mib_slot_time
#define mib_roam_low_snr_thresh mib_head.mib_roam_low_snr_thresh
#define mib_low_snr_count mib_head.mib_low_snr_count
#define mib_infra_missed_beacon_count \
mib_head.mib_infra_missed_beacon_count
#define mib_adhoc_missed_beacon_count \
mib_head.mib_adhoc_missed_beacon_count
#define mib_country_code mib_head.mib_country_code
#define mib_hop_seq mib_head.mib_hop_seq
#define mib_hop_seq_len mib_head.mib_hop_seq_len
#define mib_noise_filter_gain mib_tail.mib_noise_filter_gain
#define mib_noise_limit_offset mib_tail.mib_noise_limit_offset
#define mib_rssi_thresh_offset mib_tail.mib_rssi_thresh_offset
#define mib_busy_thresh_offset mib_tail.mib_busy_thresh_offset
#define mib_sync_thresh mib_tail.mib_sync_thresh
#define mib_test_mode mib_tail.mib_test_mode
#define mib_test_min_chan mib_tail.mib_test_min_chan
#define mib_test_max_chan mib_tail.mib_test_max_chan
/*
* IOCTL support
*/
struct ray_param_req {
int r_failcause;
u_int8_t r_paramid;
u_int8_t r_len;
u_int8_t r_data[256];
};
struct ray_stats_req {
u_int64_t rxoverflow; /* Number of rx overflows */
u_int64_t rxcksum; /* Number of checksum errors */
u_int64_t rxhcksum; /* Number of header checksum errors */
u_int8_t rxnoise; /* Average receiver level */
};
#define RAY_FAILCAUSE_EIDRANGE 1
#define RAY_FAILCAUSE_ELENGTH 2
/* device can possibly return up to 255 */
#define RAY_FAILCAUSE_EDEVSTOP 256
#ifdef KERNEL
#define RAY_FAILCAUSE_WAITING 257
#endif
/* Get a param the data is a ray_param_req structure */
#define SIOCSRAYPARAM SIOCSIFGENERIC
#define SIOCGRAYPARAM SIOCGIFGENERIC
/* Get the error counters the data is a ray_stats_req structure */
#define SIOCGRAYSTATS _IOWR('i', 59, struct ifreq)
/*
* MIB IDs for the update/report param commands
*/
#define RAY_MIB_NET_TYPE 0
#define RAY_MIB_AP_STATUS 1
#define RAY_MIB_SSID 2
#define RAY_MIB_SCAN_MODE 3
#define RAY_MIB_APM_MODE 4
#define RAY_MIB_MAC_ADDR 5
#define RAY_MIB_FRAG_THRESH 6
#define RAY_MIB_DWELL_TIME 7
#define RAY_MIB_BEACON_PERIOD 8
#define RAY_MIB_DTIM_INTERVAL 9
#define RAY_MIB_MAX_RETRY 10
#define RAY_MIB_ACK_TIMO 11
#define RAY_MIB_SIFS 12
#define RAY_MIB_DIFS 13
#define RAY_MIB_PIFS 14
#define RAY_MIB_RTS_THRESH 15
#define RAY_MIB_SCAN_DWELL 16
#define RAY_MIB_SCAN_MAX_DWELL 17
#define RAY_MIB_ASSOC_TIMO 18
#define RAY_MIB_ADHOC_SCAN_CYCLE 19
#define RAY_MIB_INFRA_SCAN_CYCLE 20
#define RAY_MIB_INFRA_SUPER_SCAN_CYCLE 21
#define RAY_MIB_PROMISC 22
#define RAY_MIB_UNIQ_WORD 23
#define RAY_MIB_SLOT_TIME 24
#define RAY_MIB_ROAM_LOW_SNR_THRESH 25
#define RAY_MIB_LOW_SNR_COUNT 26
#define RAY_MIB_INFRA_MISSED_BEACON_COUNT 27
#define RAY_MIB_ADHOC_MISSED_BEACON_COUNT 28
#define RAY_MIB_COUNTRY_CODE 29
#define RAY_MIB_HOP_SEQ 30
#define RAY_MIB_HOP_SEQ_LEN 31
#define RAY_MIB_CW_MAX 32
#define RAY_MIB_CW_MIN 33
#define RAY_MIB_NOISE_FILTER_GAIN 34
#define RAY_MIB_NOISE_LIMIT_OFFSET 35
#define RAY_MIB_RSSI_THRESH_OFFSET 36
#define RAY_MIB_BUSY_THRESH_OFFSET 37
#define RAY_MIB_SYNC_THRESH 38
#define RAY_MIB_TEST_MODE 39
#define RAY_MIB_TEST_MIN_CHAN 40
#define RAY_MIB_TEST_MAX_CHAN 41
#define RAY_MIB_ALLOW_PROBE_RESP 42
#define RAY_MIB_PRIVACY_MUST_START 43
#define RAY_MIB_PRIVACY_CAN_JOIN 44
#define RAY_MIB_BASIC_RATE_SET 45
#define RAY_MIB_MAX 46
/*
* Strings for the MIB
*/
#define RAY_MIB_STRINGS { \
"NET_TYPE", \
"AP_STATUS", \
"SSID", \
"SCAN_MODE", \
"APM_MODE", \
"MAC_ADDR", \
"FRAG_THRESH", \
"DWELL_TIME", \
"BEACON_PERIOD", \
"DTIM_INTERVAL", \
"MAX_RETRY", \
"ACK_TIMO", \
"SIFS", \
"DIFS", \
"PIFS", \
"RTS_THRESH", \
"SCAN_DWELL", \
"SCAN_MAX_DWELL", \
"ASSOC_TIMO", \
"ADHOC_SCAN_CYCLE", \
"INFRA_SCAN_CYCLE", \
"INFRA_SUPER_SCAN_CYCLE", \
"PROMISC", \
"UNIQ_WORD", \
"SLOT_TIME", \
"ROAM_LOW_SNR_THRESH", \
"LOW_SNR_COUNT", \
"INFRA_MISSED_BEACON_COUNT", \
"ADHOC_MISSED_BEACON_COUNT", \
"COUNTRY_CODE", \
"HOP_SEQ", \
"HOP_SEQ_LEN", \
"CW_MAX", \
"CW_MIN", \
"NOISE_FILTER_GAIN", \
"NOISE_LIMIT_OFFSET", \
"RSSI_THRESH_OFFSET", \
"BUSY_THRESH_OFFSET", \
"SYNC_THRESH", \
"TEST_MODE", \
"TEST_MIN_CHAN", \
"TEST_MAX_CHAN", \
"ALLOW_PROBE_RESP", \
"PRIVACY_MUST_START", \
"PRIVACY_CAN_JOIN", \
"BASIC_RATE_SET" \
}
/*
* Sizes for each MIB element
*/
#define RAY_MIB_SIZES { \
1, /* RAY_MIB_NET_TYPE */ \
1, /* RAY_MIB_AP_STATUS */ \
IEEE80211_NWID_LEN, /* RAY_MIB_SSID */ \
1, /* RAY_MIB_SCAN_MODE */ \
1, /* RAY_MIB_APM_MODE */ \
ETHER_ADDR_LEN,/* RAY_MIB_MAC_ADDR */ \
2, /* RAY_MIB_FRAG_THRESH */ \
2, /* RAY_MIB_DWELL_TIME */ \
2, /* RAY_MIB_BEACON_PERIOD */ \
1, /* RAY_MIB_DTIM_INTERVAL */ \
1, /* RAY_MIB_MAX_RETRY */ \
1, /* RAY_MIB_ACK_TIMO */ \
1, /* RAY_MIB_SIFS */ \
1, /* RAY_MIB_DIFS */ \
1, /* RAY_MIB_PIFS */ \
2, /* RAY_MIB_RTS_THRESH */ \
2, /* RAY_MIB_SCAN_DWELL */ \
2, /* RAY_MIB_SCAN_MAX_DWELL */ \
1, /* RAY_MIB_ASSOC_TIMO */ \
1, /* RAY_MIB_ADHOC_SCAN_CYCLE */ \
1, /* RAY_MIB_INFRA_SCAN_CYCLE */ \
1, /* RAY_MIB_INFRA_SUPER_SCAN_CYCLE */ \
1, /* RAY_MIB_PROMISC */ \
2, /* RAY_MIB_UNIQ_WORD */ \
1, /* RAY_MIB_SLOT_TIME */ \
1, /* RAY_MIB_ROAM_LOW_SNR_THRESH */ \
1, /* RAY_MIB_LOW_SNR_COUNT */ \
1, /* RAY_MIB_INFRA_MISSED_BEACON_COUNT */ \
1, /* RAY_MIB_ADHOC_MISSED_BEACON_COUNT */ \
1, /* RAY_MIB_COUNTRY_CODE */ \
1, /* RAY_MIB_HOP_SEQ */ \
1, /* RAY_MIB_HOP_SEQ_LEN */ \
2, /* RAY_MIB_CW_MAX */ \
2, /* RAY_MIB_CW_MIN */ \
1, /* RAY_MIB_NOISE_FILTER_GAIN */ \
1, /* RAY_MIB_NOISE_LIMIT_OFFSET */ \
1, /* RAY_MIB_RSSI_THRESH_OFFSET */ \
1, /* RAY_MIB_BUSY_THRESH_OFFSET */ \
1, /* RAY_MIB_SYNC_THRESH */ \
1, /* RAY_MIB_TEST_MODE */ \
1, /* RAY_MIB_TEST_MIN_CHAN */ \
1, /* RAY_MIB_TEST_MAX_CHAN */ \
1, /* RAY_MIB_ALLOW_PROBE_RESP */ \
1, /* RAY_MIB_PRIVACY_MUST_START */ \
1, /* RAY_MIB_PRIVACY_CAN_JOIN */ \
8 /* RAY_MIB_BASIC_RATE_SET */ \
}
/*
* MIB values
*
* I've included comments as to where the numbers have originated
* from.
*
* Linux refers to ray_cs.c and rayctl.h from version 167 of the
* Linux Raylink driver.
*
* NetBSD refers to if_ray.c from version 1.12 of the NetBSD Raylink
* driver.
*
* Symb refers to numbers cleaned from the 802.11 specification,
* discussion with 802.11 knowledgable people at Symbionics (i.e. me,
* aps, ifo, hjl).
*
* V4 and V5 refer to settings for version 4 and version 5 of
* the firmware.
*
*/
/*
* ADHOC - I've not got an access point
*/
#define RAY_MIB_NET_TYPE_ADHOC 0x00
#define RAY_MIB_NET_TYPE_INFRA 0x01
#define RAY_MIB_NET_TYPE_DEFAULT RAY_MIB_NET_TYPE_ADHOC
/*
* TERMINAL - but we might play with using the card as an AP
*/
#define RAY_MIB_AP_STATUS_TERMINAL 0x00
#define RAY_MIB_AP_STATUS_AP 0x01
#define RAY_MIB_AP_STATUS_DEFAULT RAY_MIB_AP_STATUS_TERMINAL
/*
* - windows setting comes from the Aviator software v1.1
*/
#define RAY_MIB_SSID_WINDOWS "NETWORK_NAME"
#define RAY_MIB_SSID_NOT_WINDOWS "WIRELESS_NETWORK"
#define RAY_MIB_SSID_DEFAULT RAY_MIB_SSID_WINDOWS
#define RAY_MIB_SCAN_MODE_PASSIVE 0x00
#define RAY_MIB_SCAN_MODE_ACTIVE 0x01
#define RAY_MIB_SCAN_MODE_DEFAULT RAY_MIB_SCAN_MODE_ACTIVE
/*
* NONE - power saving only works with access points
*/
#define RAY_MIB_APM_MODE_NONE 0x00
#define RAY_MIB_APM_MODE_POWERSAVE 0x01
#define RAY_MIB_APM_MODE_DEFAULT RAY_MIB_APM_MODE_NONE
/*
* Linux.h 0x0200
* Linux.c-V4 0x7fff
* Linux.c-V5 0x7fff
* NetBSD.c 0x7fff - disabled
* Symb 0xXXXX - you really should fragment but getting it wrong
* crucifies the performance
*/
#define RAY_MIB_FRAG_THRESH_DISABLE 0x7fff
#define RAY_MIB_FRAG_THRESH_DEFAULT RAY_MIB_FRAG_THRESH_DISABLE
/*
* Linux.h - 16k * 2**n, n=0-4 in Kus
* Linux.c-V4 0x0200
* Linux.c-V5 0x0080 - 128 Kus
* NetBSD-V4 0x0200 - from Linux
* NetBSD-V4 0x0400 - "divined"
* NetBSD-V5 0x0080
* Symb-V4 0xXXXX - 802.11 dwell time is XXX Kus
* Symb-V5 0xXXXX - 802.11 dwell time is XXX Kus
* XXX - see init_startup_params in Linux.c
*/
#define RAY_MIB_DWELL_TIME_V4 0x0400
#define RAY_MIB_DWELL_TIME_V5 0x0080
/*
* Linux.h - n * a_hop_time in Kus
* Linux.c-V4 0x0001
* Linux.c-V5 0x0100 - 256 Kus
* NetBSD-V4 0x0001 - from Linux
* NetBSD-V4 0x0000 - "divined"
* NetBSD-V5 0x0100
* Symb-V4 0x0001 - best performance is one beacon each dwell XXX
* Symb-V5 0x0080 - best performance is one beacon each dwell XXX
* XXX - see init_startup_params in Linux.c
*/
#define RAY_MIB_BEACON_PERIOD_V4 0x01
#define RAY_MIB_BEACON_PERIOD_V5 RAY_MIB_DWELL_TIME_V5
/*
* Linux.h - in beacons
* Linux.c 0x01
* NetBSD 0x01
* Symb 0xXX - need to find out what DTIM is
*/
#define RAY_MIB_DTIM_INTERVAL_DEFAULT 0x01
/*
* Linux.c 0x07
* NetBSD 0x01 - documented default for 5/6
* NetBSD 0x07 - from Linux
* NetBSD 0x03 - "divined"
* Symb 0xXX - 7 retries seems okay but check with APS
*/
#define RAY_MIB_MAX_RETRY_DEFAULT 0x07
/*
* Linux.c 0xa3
* NetBSD 0x86 - documented default for 5/6
* NetBSD 0xa3 - from Linux
* NetBSD 0xa3 - "divined"
* Symb 0xXX - this must be a 802.11 defined setting?
*/
#define RAY_MIB_ACK_TIMO_DEFAULT 0xa3
/*
* Linux.c 0x1d
* NetBSD 0x1c - documented default for 5/6
* NetBSD 0x1d - from Linux
* NetBSD 0x1d - "divined"
* Symb 0xXX - default SIFS for 802.11
*/
#define RAY_MIB_SIFS_DEFAULT 0x1d
/*
* Linux.c 0x82
* NetBSD 0x82 - documented default for 5/6
* NetBSD 0x82 - from Linux
* Symb 0xXX - default DIFS for 802.11
*/
#define RAY_MIB_DIFS_DEFAULT 0x82
/*
* Linux.c-V4 0xce
* Linux.c-V5 0x4e
* NetBSD 0x00 - documented default for 5/6
* NetBSD-V4 0xce - from Linux
* NetBSD-V5 0x4e - from Linux
* Symb 0xXX - default PIFS for 802.11
*/
#define RAY_MIB_PIFS_V4 0xce
#define RAY_MIB_PIFS_V5 0x4e
/*
* Linux.c 0x7fff
* NetBSD 0x7fff - disabled
* Symb 0xXXXX - need to set this realistically to get CTS/RTS mode
* working right
*/
#define RAY_MIB_RTS_THRESH_DISABLE 0x7fff
#define RAY_MIB_RTS_THRESH_DEFAULT RAY_MIB_RTS_THRESH_DISABLE
/*
* Linux.c-V4 0xfb1e
* Linix.c-V5 0x04e2
* NetBSD-V4 0xfb1e
* NetBSD-V5 0x04e2
* Symb 0xXXXX - this might be the time to dwell on a channel
* whilst scanning for the n/w. In that case it should
* be tied to the dwell time above.
* V5 numbers could be Kus,
* 0x04e2Kus = 1250*1024us = 1.28 seconds
*/
#define RAY_MIB_SCAN_DWELL_V4 0xfb1e
#define RAY_MIB_SCAN_DWELL_V5 0x04e2
/*
* Linux.c-V4 0xc75c
* Linix.c-V5 0x38a4
* NetBSD-V4 0xc75c
* NetBSD-V5 0x38a4
* Symb 0xXXXX - see above - this may be total time before giving up
* but 0x38a4 Kus is about 14 seconds
* i.e. not 79*SCAN_DWELL
*/
#define RAY_MIB_SCAN_MAX_DWELL_V4 0xc75c
#define RAY_MIB_SCAN_MAX_DWELL_V5 0x38a4
/*
* Linix.c 0x05
* NetBSD 0x05
* Symb 0xXX - can't be in Kus too short
*/
#define RAY_MIB_ASSOC_TIMO_DEFAULT 0x05
/*
* Linix.c-V4 0x04
* Linux.c-V5 0x08
* NetBSD-V4 0x04 - Linux
* NetBSD-V4 0x08 - "divined"
* NetBSD-V5 0x08
* Symb 0xXX - hmm maybe this ties in with the DWELL_SCAN above?
*/
#define RAY_MIB_ADHOC_SCAN_CYCLE_DEFAULT 0x08
/*
* Linix.c 0x02
* NetBSD-V4 0x02 - Linux
* NetBSD-V4 0x01 - "divined"
* NetBSD-V5 0x02
* Symb 0xXX - hmm maybe this ties in with the DWELL_SCAN above?
*/
#define RAY_MIB_INFRA_SCAN_CYCLE_DEFAULT 0x02
/*
* Linix.c-V4 0x04
* Linux.c-V5 0x08
* NetBSD-V4 0x04 - Linux
* NetBSD-V4 0x18 - "divined"
* NetBSD-V5 0x08
* Symb 0xXX - hmm maybe this ties in with the DWELL_SCAN above?
*/
#define RAY_MIB_INFRA_SUPER_SCAN_CYCLE_DEFAULT 0x08
#define RAY_MIB_PROMISC_DEFAULT 0x00
#define RAY_MIB_UNIQ_WORD_DEFAULT 0x0cbd
/*
* Linux.c-V4 0x4e
* Linix.c-V5 0x32
* NetBSD-V4 0x4e - Linux
* NetBSD-V4 0x18 - "divined"
* NetBSD-V5 0x32 - mentions spec. is 50us i.e. 0x32
* Symb 0xXX - wtf 0x4e = 78
*/
#define RAY_MIB_SLOT_TIME_V4 0x4e
#define RAY_MIB_SLOT_TIME_V5 0x32
/*
* Linux.c 0xff
* NetBSD-V4 0xff - Linux
* NetBSD-V4 0x30 - "divined"
* NetBSD-V5 0xff - disabled
* NetBSD.h - if below this inc count
* Symb 0xXX - hmm is 0xff really disabled? need this to work
*/
#define RAY_MIB_ROAM_LOW_SNR_THRESH_DISABLED 0xff
#define RAY_MIB_ROAM_LOW_SNR_THRESH_DEFAULT RAY_MIB_ROAM_LOW_SNR_THRESH_DISABLED
/*
* Linux.c 0xff
* NetBSD 0x07 - "divined - check" and marked as disabled
* NetBSD 0xff - disabled
* NetBSD.h - roam after cnt below thrsh
* Symb 0xXX - hmm is 0xff really disabled? need this to work
*/
#define RAY_MIB_LOW_SNR_COUNT_DISABLED 0xff
#define RAY_MIB_LOW_SNR_COUNT_DEFAULT RAY_MIB_LOW_SNR_COUNT_DISABLED
/*
* Linux.c 0x05
* NetBSD 0x02 - documented default for 5/6
* NetBSD 0x05 - Linux
* NetBSD 0x07 - "divined - check, looks fishy"
* Symb 0xXX - 5 missed beacons is probably okay
*/
#define RAY_MIB_INFRA_MISSED_BEACON_COUNT_DEFAULT 0x05
/*
* Linux.c 0xff
* NetBSD 0xff
* Symb 0xXX - so what happens in adhoc if the beacon is missed?
* do we create our own beacon
*/
#define RAY_MIB_ADHOC_MISSED_BEACON_COUNT_DISABLED 0xff
#define RAY_MIB_ADHOC_MISSED_BEACON_COUNT_DEFAULT RAY_MIB_ADHOC_MISSED_BEACON_COUNT_DISABLED
#define RAY_MIB_COUNTRY_CODE_USA 0x1
#define RAY_MIB_COUNTRY_CODE_EUROPE 0x2
#define RAY_MIB_COUNTRY_CODE_JAPAN 0x3
#define RAY_MIB_COUNTRY_CODE_KOREA 0x4
#define RAY_MIB_COUNTRY_CODE_SPAIN 0x5
#define RAY_MIB_COUNTRY_CODE_FRANCE 0x6
#define RAY_MIB_COUNTRY_CODE_ISRAEL 0x7
#define RAY_MIB_COUNTRY_CODE_AUSTRALIA 0x8
#define RAY_MIB_COUNTRY_CODE_JAPAN_TEST 0x9
#define RAY_MIB_COUNTRY_CODE_MAX 0xa
#define RAY_MIB_COUNTRY_CODE_DEFAULT RAY_MIB_COUNTRY_CODE_USA
/*
* NetBSD.h - no longer supported
*/
#define RAY_MIB_HOP_SEQ_DEFAULT 0x0b
/*
* Linux.c-V4 0x4e
* Linix.c-V5 0x4f
* NetBSD-V4 0x4e
* NetBSD-V5 0x4f
* Symb 0xXX - 0x4e = 78 so is it a cock up?
*/
#define RAY_MIB_HOP_SEQ_LEN_V4 0x4e
#define RAY_MIB_HOP_SEQ_LEN_V5 0x4f
/*
* All from here down are the same in Linux/NetBSD and seem to be sane.
*/
#define RAY_MIB_CW_MAX_V4 0x3f
#define RAY_MIB_CW_MAX_V5 0x003f
#define RAY_MIB_CW_MIN_V4 0x0f
#define RAY_MIB_CW_MIN_V5 0x000f
/*
* Symb 0xXX - these parameters will affect the clear channel
* assesment false triggering
*
*/
#define RAY_MIB_NOISE_FILTER_GAIN_DEFAULT 0x04
#define RAY_MIB_NOISE_LIMIT_OFFSET_DEFAULT 0x08
#define RAY_MIB_RSSI_THRESH_OFFSET_DEFAULT 0x28
#define RAY_MIB_BUSY_THRESH_OFFSET_DEFAULT 0x28
#define RAY_MIB_SYNC_THRESH_DEFAULT 0x07
#define RAY_MIB_TEST_MODE_NORMAL 0x0
#define RAY_MIB_TEST_MODE_ANT_1 0x1
#define RAY_MIB_TEST_MODE_ATN_2 0x2
#define RAY_MIB_TEST_MODE_ATN_BOTH 0x3
#define RAY_MIB_TEST_MODE_DEFAULT RAY_MIB_TEST_MODE_NORMAL
#define RAY_MIB_TEST_MIN_CHAN_DEFAULT 0x02
#define RAY_MIB_TEST_MAX_CHAN_DEFAULT 0x02
#define RAY_MIB_ALLOW_PROBE_RESP_DISALLOW 0x0
#define RAY_MIB_ALLOW_PROBE_RESP_ALLOW 0x1
#define RAY_MIB_ALLOW_PROBE_RESP_DEFAULT RAY_MIB_ALLOW_PROBE_RESP_DISALLOW
#define RAY_MIB_PRIVACY_MUST_START_NOWEP 0x0
#define RAY_MIB_PRIVACY_MUST_START_WEP 0x1
#define RAY_MIB_PRIVACY_MUST_START_DEFAULT RAY_MIB_PRIVACY_MUST_START_NOWEP
#define RAY_MIB_PRIVACY_CAN_JOIN_NOWEP 0x0
#define RAY_MIB_PRIVACY_CAN_JOIN_WEP 0x1
#define RAY_MIB_PRIVACY_CAN_JOIN_DONT_CARE 0x2
#define RAY_MIB_PRIVACY_CAN_JOIN_DEFAULT RAY_MIB_PRIVACY_CAN_JOIN_NOWEP
#define RAY_MIB_BASIC_RATE_SET_500K 1
#define RAY_MIB_BASIC_RATE_SET_1000K 2
#define RAY_MIB_BASIC_RATE_SET_1500K 3
#define RAY_MIB_BASIC_RATE_SET_2000K 4
#define RAY_MIB_BASIC_RATE_SET_DEFAULT RAY_MIB_BASIC_RATE_SET_1000K