a1d477c24c
OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
606 lines
16 KiB
C
606 lines
16 KiB
C
/*
|
|
* CDDL HEADER START
|
|
*
|
|
* The contents of this file are subject to the terms of the
|
|
* Common Development and Distribution License (the "License").
|
|
* You may not use this file except in compliance with the License.
|
|
*
|
|
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
|
|
* or http://www.opensolaris.org/os/licensing.
|
|
* See the License for the specific language governing permissions
|
|
* and limitations under the License.
|
|
*
|
|
* When distributing Covered Code, include this CDDL HEADER in each
|
|
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
|
|
* If applicable, add the following below this CDDL HEADER, with the
|
|
* fields enclosed by brackets "[]" replaced with your own identifying
|
|
* information: Portions Copyright [yyyy] [name of copyright owner]
|
|
*
|
|
* CDDL HEADER END
|
|
*/
|
|
/*
|
|
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
|
|
* Copyright (c) 2011, 2016 by Delphix. All rights reserved.
|
|
* Copyright (c) 2017 Datto Inc.
|
|
*/
|
|
|
|
#include <sys/bpobj.h>
|
|
#include <sys/zfs_context.h>
|
|
#include <sys/refcount.h>
|
|
#include <sys/dsl_pool.h>
|
|
#include <sys/zfeature.h>
|
|
#include <sys/zap.h>
|
|
|
|
/*
|
|
* Return an empty bpobj, preferably the empty dummy one (dp_empty_bpobj).
|
|
*/
|
|
uint64_t
|
|
bpobj_alloc_empty(objset_t *os, int blocksize, dmu_tx_t *tx)
|
|
{
|
|
spa_t *spa = dmu_objset_spa(os);
|
|
dsl_pool_t *dp = dmu_objset_pool(os);
|
|
|
|
if (spa_feature_is_enabled(spa, SPA_FEATURE_EMPTY_BPOBJ)) {
|
|
if (!spa_feature_is_active(spa, SPA_FEATURE_EMPTY_BPOBJ)) {
|
|
ASSERT0(dp->dp_empty_bpobj);
|
|
dp->dp_empty_bpobj =
|
|
bpobj_alloc(os, SPA_OLD_MAXBLOCKSIZE, tx);
|
|
VERIFY(zap_add(os,
|
|
DMU_POOL_DIRECTORY_OBJECT,
|
|
DMU_POOL_EMPTY_BPOBJ, sizeof (uint64_t), 1,
|
|
&dp->dp_empty_bpobj, tx) == 0);
|
|
}
|
|
spa_feature_incr(spa, SPA_FEATURE_EMPTY_BPOBJ, tx);
|
|
ASSERT(dp->dp_empty_bpobj != 0);
|
|
return (dp->dp_empty_bpobj);
|
|
} else {
|
|
return (bpobj_alloc(os, blocksize, tx));
|
|
}
|
|
}
|
|
|
|
void
|
|
bpobj_decr_empty(objset_t *os, dmu_tx_t *tx)
|
|
{
|
|
dsl_pool_t *dp = dmu_objset_pool(os);
|
|
|
|
spa_feature_decr(dmu_objset_spa(os), SPA_FEATURE_EMPTY_BPOBJ, tx);
|
|
if (!spa_feature_is_active(dmu_objset_spa(os),
|
|
SPA_FEATURE_EMPTY_BPOBJ)) {
|
|
VERIFY3U(0, ==, zap_remove(dp->dp_meta_objset,
|
|
DMU_POOL_DIRECTORY_OBJECT,
|
|
DMU_POOL_EMPTY_BPOBJ, tx));
|
|
VERIFY3U(0, ==, dmu_object_free(os, dp->dp_empty_bpobj, tx));
|
|
dp->dp_empty_bpobj = 0;
|
|
}
|
|
}
|
|
|
|
uint64_t
|
|
bpobj_alloc(objset_t *os, int blocksize, dmu_tx_t *tx)
|
|
{
|
|
int size;
|
|
|
|
if (spa_version(dmu_objset_spa(os)) < SPA_VERSION_BPOBJ_ACCOUNT)
|
|
size = BPOBJ_SIZE_V0;
|
|
else if (spa_version(dmu_objset_spa(os)) < SPA_VERSION_DEADLISTS)
|
|
size = BPOBJ_SIZE_V1;
|
|
else
|
|
size = sizeof (bpobj_phys_t);
|
|
|
|
return (dmu_object_alloc(os, DMU_OT_BPOBJ, blocksize,
|
|
DMU_OT_BPOBJ_HDR, size, tx));
|
|
}
|
|
|
|
void
|
|
bpobj_free(objset_t *os, uint64_t obj, dmu_tx_t *tx)
|
|
{
|
|
int64_t i;
|
|
bpobj_t bpo;
|
|
dmu_object_info_t doi;
|
|
int epb;
|
|
dmu_buf_t *dbuf = NULL;
|
|
|
|
ASSERT(obj != dmu_objset_pool(os)->dp_empty_bpobj);
|
|
VERIFY3U(0, ==, bpobj_open(&bpo, os, obj));
|
|
|
|
mutex_enter(&bpo.bpo_lock);
|
|
|
|
if (!bpo.bpo_havesubobj || bpo.bpo_phys->bpo_subobjs == 0)
|
|
goto out;
|
|
|
|
VERIFY3U(0, ==, dmu_object_info(os, bpo.bpo_phys->bpo_subobjs, &doi));
|
|
epb = doi.doi_data_block_size / sizeof (uint64_t);
|
|
|
|
for (i = bpo.bpo_phys->bpo_num_subobjs - 1; i >= 0; i--) {
|
|
uint64_t *objarray;
|
|
uint64_t offset, blkoff;
|
|
|
|
offset = i * sizeof (uint64_t);
|
|
blkoff = P2PHASE(i, epb);
|
|
|
|
if (dbuf == NULL || dbuf->db_offset > offset) {
|
|
if (dbuf)
|
|
dmu_buf_rele(dbuf, FTAG);
|
|
VERIFY3U(0, ==, dmu_buf_hold(os,
|
|
bpo.bpo_phys->bpo_subobjs, offset, FTAG, &dbuf, 0));
|
|
}
|
|
|
|
ASSERT3U(offset, >=, dbuf->db_offset);
|
|
ASSERT3U(offset, <, dbuf->db_offset + dbuf->db_size);
|
|
|
|
objarray = dbuf->db_data;
|
|
bpobj_free(os, objarray[blkoff], tx);
|
|
}
|
|
if (dbuf) {
|
|
dmu_buf_rele(dbuf, FTAG);
|
|
dbuf = NULL;
|
|
}
|
|
VERIFY3U(0, ==, dmu_object_free(os, bpo.bpo_phys->bpo_subobjs, tx));
|
|
|
|
out:
|
|
mutex_exit(&bpo.bpo_lock);
|
|
bpobj_close(&bpo);
|
|
|
|
VERIFY3U(0, ==, dmu_object_free(os, obj, tx));
|
|
}
|
|
|
|
int
|
|
bpobj_open(bpobj_t *bpo, objset_t *os, uint64_t object)
|
|
{
|
|
dmu_object_info_t doi;
|
|
int err;
|
|
|
|
err = dmu_object_info(os, object, &doi);
|
|
if (err)
|
|
return (err);
|
|
|
|
bzero(bpo, sizeof (*bpo));
|
|
mutex_init(&bpo->bpo_lock, NULL, MUTEX_DEFAULT, NULL);
|
|
|
|
ASSERT(bpo->bpo_dbuf == NULL);
|
|
ASSERT(bpo->bpo_phys == NULL);
|
|
ASSERT(object != 0);
|
|
ASSERT3U(doi.doi_type, ==, DMU_OT_BPOBJ);
|
|
ASSERT3U(doi.doi_bonus_type, ==, DMU_OT_BPOBJ_HDR);
|
|
|
|
err = dmu_bonus_hold(os, object, bpo, &bpo->bpo_dbuf);
|
|
if (err)
|
|
return (err);
|
|
|
|
bpo->bpo_os = os;
|
|
bpo->bpo_object = object;
|
|
bpo->bpo_epb = doi.doi_data_block_size >> SPA_BLKPTRSHIFT;
|
|
bpo->bpo_havecomp = (doi.doi_bonus_size > BPOBJ_SIZE_V0);
|
|
bpo->bpo_havesubobj = (doi.doi_bonus_size > BPOBJ_SIZE_V1);
|
|
bpo->bpo_phys = bpo->bpo_dbuf->db_data;
|
|
return (0);
|
|
}
|
|
|
|
boolean_t
|
|
bpobj_is_open(const bpobj_t *bpo)
|
|
{
|
|
return (bpo->bpo_object != 0);
|
|
}
|
|
|
|
void
|
|
bpobj_close(bpobj_t *bpo)
|
|
{
|
|
/* Lame workaround for closing a bpobj that was never opened. */
|
|
if (bpo->bpo_object == 0)
|
|
return;
|
|
|
|
dmu_buf_rele(bpo->bpo_dbuf, bpo);
|
|
if (bpo->bpo_cached_dbuf != NULL)
|
|
dmu_buf_rele(bpo->bpo_cached_dbuf, bpo);
|
|
bpo->bpo_dbuf = NULL;
|
|
bpo->bpo_phys = NULL;
|
|
bpo->bpo_cached_dbuf = NULL;
|
|
bpo->bpo_object = 0;
|
|
|
|
mutex_destroy(&bpo->bpo_lock);
|
|
}
|
|
|
|
boolean_t
|
|
bpobj_is_empty(bpobj_t *bpo)
|
|
{
|
|
return (bpo->bpo_phys->bpo_num_blkptrs == 0 &&
|
|
(!bpo->bpo_havesubobj || bpo->bpo_phys->bpo_num_subobjs == 0));
|
|
}
|
|
|
|
static int
|
|
bpobj_iterate_impl(bpobj_t *bpo, bpobj_itor_t func, void *arg, dmu_tx_t *tx,
|
|
boolean_t free)
|
|
{
|
|
dmu_object_info_t doi;
|
|
int epb;
|
|
int64_t i;
|
|
int err = 0;
|
|
dmu_buf_t *dbuf = NULL;
|
|
|
|
ASSERT(bpobj_is_open(bpo));
|
|
mutex_enter(&bpo->bpo_lock);
|
|
|
|
if (free)
|
|
dmu_buf_will_dirty(bpo->bpo_dbuf, tx);
|
|
|
|
for (i = bpo->bpo_phys->bpo_num_blkptrs - 1; i >= 0; i--) {
|
|
blkptr_t *bparray;
|
|
blkptr_t *bp;
|
|
uint64_t offset, blkoff;
|
|
|
|
offset = i * sizeof (blkptr_t);
|
|
blkoff = P2PHASE(i, bpo->bpo_epb);
|
|
|
|
if (dbuf == NULL || dbuf->db_offset > offset) {
|
|
if (dbuf)
|
|
dmu_buf_rele(dbuf, FTAG);
|
|
err = dmu_buf_hold(bpo->bpo_os, bpo->bpo_object, offset,
|
|
FTAG, &dbuf, 0);
|
|
if (err)
|
|
break;
|
|
}
|
|
|
|
ASSERT3U(offset, >=, dbuf->db_offset);
|
|
ASSERT3U(offset, <, dbuf->db_offset + dbuf->db_size);
|
|
|
|
bparray = dbuf->db_data;
|
|
bp = &bparray[blkoff];
|
|
err = func(arg, bp, tx);
|
|
if (err)
|
|
break;
|
|
if (free) {
|
|
bpo->bpo_phys->bpo_bytes -=
|
|
bp_get_dsize_sync(dmu_objset_spa(bpo->bpo_os), bp);
|
|
ASSERT3S(bpo->bpo_phys->bpo_bytes, >=, 0);
|
|
if (bpo->bpo_havecomp) {
|
|
bpo->bpo_phys->bpo_comp -= BP_GET_PSIZE(bp);
|
|
bpo->bpo_phys->bpo_uncomp -= BP_GET_UCSIZE(bp);
|
|
}
|
|
bpo->bpo_phys->bpo_num_blkptrs--;
|
|
ASSERT3S(bpo->bpo_phys->bpo_num_blkptrs, >=, 0);
|
|
}
|
|
}
|
|
if (dbuf) {
|
|
dmu_buf_rele(dbuf, FTAG);
|
|
dbuf = NULL;
|
|
}
|
|
if (free) {
|
|
VERIFY3U(0, ==, dmu_free_range(bpo->bpo_os, bpo->bpo_object,
|
|
(i + 1) * sizeof (blkptr_t), DMU_OBJECT_END, tx));
|
|
}
|
|
if (err || !bpo->bpo_havesubobj || bpo->bpo_phys->bpo_subobjs == 0)
|
|
goto out;
|
|
|
|
ASSERT(bpo->bpo_havecomp);
|
|
err = dmu_object_info(bpo->bpo_os, bpo->bpo_phys->bpo_subobjs, &doi);
|
|
if (err) {
|
|
mutex_exit(&bpo->bpo_lock);
|
|
return (err);
|
|
}
|
|
ASSERT3U(doi.doi_type, ==, DMU_OT_BPOBJ_SUBOBJ);
|
|
epb = doi.doi_data_block_size / sizeof (uint64_t);
|
|
|
|
for (i = bpo->bpo_phys->bpo_num_subobjs - 1; i >= 0; i--) {
|
|
uint64_t *objarray;
|
|
uint64_t offset, blkoff;
|
|
bpobj_t sublist;
|
|
uint64_t used_before, comp_before, uncomp_before;
|
|
uint64_t used_after, comp_after, uncomp_after;
|
|
|
|
offset = i * sizeof (uint64_t);
|
|
blkoff = P2PHASE(i, epb);
|
|
|
|
if (dbuf == NULL || dbuf->db_offset > offset) {
|
|
if (dbuf)
|
|
dmu_buf_rele(dbuf, FTAG);
|
|
err = dmu_buf_hold(bpo->bpo_os,
|
|
bpo->bpo_phys->bpo_subobjs, offset, FTAG, &dbuf, 0);
|
|
if (err)
|
|
break;
|
|
}
|
|
|
|
ASSERT3U(offset, >=, dbuf->db_offset);
|
|
ASSERT3U(offset, <, dbuf->db_offset + dbuf->db_size);
|
|
|
|
objarray = dbuf->db_data;
|
|
err = bpobj_open(&sublist, bpo->bpo_os, objarray[blkoff]);
|
|
if (err)
|
|
break;
|
|
if (free) {
|
|
err = bpobj_space(&sublist,
|
|
&used_before, &comp_before, &uncomp_before);
|
|
if (err != 0) {
|
|
bpobj_close(&sublist);
|
|
break;
|
|
}
|
|
}
|
|
err = bpobj_iterate_impl(&sublist, func, arg, tx, free);
|
|
if (free) {
|
|
VERIFY3U(0, ==, bpobj_space(&sublist,
|
|
&used_after, &comp_after, &uncomp_after));
|
|
bpo->bpo_phys->bpo_bytes -= used_before - used_after;
|
|
ASSERT3S(bpo->bpo_phys->bpo_bytes, >=, 0);
|
|
bpo->bpo_phys->bpo_comp -= comp_before - comp_after;
|
|
bpo->bpo_phys->bpo_uncomp -=
|
|
uncomp_before - uncomp_after;
|
|
}
|
|
|
|
bpobj_close(&sublist);
|
|
if (err)
|
|
break;
|
|
if (free) {
|
|
err = dmu_object_free(bpo->bpo_os,
|
|
objarray[blkoff], tx);
|
|
if (err)
|
|
break;
|
|
bpo->bpo_phys->bpo_num_subobjs--;
|
|
ASSERT3S(bpo->bpo_phys->bpo_num_subobjs, >=, 0);
|
|
}
|
|
}
|
|
if (dbuf) {
|
|
dmu_buf_rele(dbuf, FTAG);
|
|
dbuf = NULL;
|
|
}
|
|
if (free) {
|
|
VERIFY3U(0, ==, dmu_free_range(bpo->bpo_os,
|
|
bpo->bpo_phys->bpo_subobjs,
|
|
(i + 1) * sizeof (uint64_t), DMU_OBJECT_END, tx));
|
|
}
|
|
|
|
out:
|
|
/* If there are no entries, there should be no bytes. */
|
|
if (bpobj_is_empty(bpo)) {
|
|
ASSERT0(bpo->bpo_phys->bpo_bytes);
|
|
ASSERT0(bpo->bpo_phys->bpo_comp);
|
|
ASSERT0(bpo->bpo_phys->bpo_uncomp);
|
|
}
|
|
|
|
mutex_exit(&bpo->bpo_lock);
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* Iterate and remove the entries. If func returns nonzero, iteration
|
|
* will stop and that entry will not be removed.
|
|
*/
|
|
int
|
|
bpobj_iterate(bpobj_t *bpo, bpobj_itor_t func, void *arg, dmu_tx_t *tx)
|
|
{
|
|
return (bpobj_iterate_impl(bpo, func, arg, tx, B_TRUE));
|
|
}
|
|
|
|
/*
|
|
* Iterate the entries. If func returns nonzero, iteration will stop.
|
|
*/
|
|
int
|
|
bpobj_iterate_nofree(bpobj_t *bpo, bpobj_itor_t func, void *arg, dmu_tx_t *tx)
|
|
{
|
|
return (bpobj_iterate_impl(bpo, func, arg, tx, B_FALSE));
|
|
}
|
|
|
|
void
|
|
bpobj_enqueue_subobj(bpobj_t *bpo, uint64_t subobj, dmu_tx_t *tx)
|
|
{
|
|
bpobj_t subbpo;
|
|
uint64_t used, comp, uncomp, subsubobjs;
|
|
|
|
ASSERT(bpobj_is_open(bpo));
|
|
ASSERT(subobj != 0);
|
|
ASSERT(bpo->bpo_havesubobj);
|
|
ASSERT(bpo->bpo_havecomp);
|
|
ASSERT(bpo->bpo_object != dmu_objset_pool(bpo->bpo_os)->dp_empty_bpobj);
|
|
|
|
if (subobj == dmu_objset_pool(bpo->bpo_os)->dp_empty_bpobj) {
|
|
bpobj_decr_empty(bpo->bpo_os, tx);
|
|
return;
|
|
}
|
|
|
|
VERIFY3U(0, ==, bpobj_open(&subbpo, bpo->bpo_os, subobj));
|
|
VERIFY3U(0, ==, bpobj_space(&subbpo, &used, &comp, &uncomp));
|
|
|
|
if (bpobj_is_empty(&subbpo)) {
|
|
/* No point in having an empty subobj. */
|
|
bpobj_close(&subbpo);
|
|
bpobj_free(bpo->bpo_os, subobj, tx);
|
|
return;
|
|
}
|
|
|
|
mutex_enter(&bpo->bpo_lock);
|
|
dmu_buf_will_dirty(bpo->bpo_dbuf, tx);
|
|
if (bpo->bpo_phys->bpo_subobjs == 0) {
|
|
bpo->bpo_phys->bpo_subobjs = dmu_object_alloc(bpo->bpo_os,
|
|
DMU_OT_BPOBJ_SUBOBJ, SPA_OLD_MAXBLOCKSIZE,
|
|
DMU_OT_NONE, 0, tx);
|
|
}
|
|
|
|
ASSERTV(dmu_object_info_t doi);
|
|
ASSERT0(dmu_object_info(bpo->bpo_os, bpo->bpo_phys->bpo_subobjs, &doi));
|
|
ASSERT3U(doi.doi_type, ==, DMU_OT_BPOBJ_SUBOBJ);
|
|
|
|
dmu_write(bpo->bpo_os, bpo->bpo_phys->bpo_subobjs,
|
|
bpo->bpo_phys->bpo_num_subobjs * sizeof (subobj),
|
|
sizeof (subobj), &subobj, tx);
|
|
bpo->bpo_phys->bpo_num_subobjs++;
|
|
|
|
/*
|
|
* If subobj has only one block of subobjs, then move subobj's
|
|
* subobjs to bpo's subobj list directly. This reduces
|
|
* recursion in bpobj_iterate due to nested subobjs.
|
|
*/
|
|
subsubobjs = subbpo.bpo_phys->bpo_subobjs;
|
|
if (subsubobjs != 0) {
|
|
dmu_object_info_t doi;
|
|
|
|
VERIFY3U(0, ==, dmu_object_info(bpo->bpo_os, subsubobjs, &doi));
|
|
if (doi.doi_max_offset == doi.doi_data_block_size) {
|
|
dmu_buf_t *subdb;
|
|
uint64_t numsubsub = subbpo.bpo_phys->bpo_num_subobjs;
|
|
|
|
VERIFY3U(0, ==, dmu_buf_hold(bpo->bpo_os, subsubobjs,
|
|
0, FTAG, &subdb, 0));
|
|
/*
|
|
* Make sure that we are not asking dmu_write()
|
|
* to write more data than we have in our buffer.
|
|
*/
|
|
VERIFY3U(subdb->db_size, >=,
|
|
numsubsub * sizeof (subobj));
|
|
dmu_write(bpo->bpo_os, bpo->bpo_phys->bpo_subobjs,
|
|
bpo->bpo_phys->bpo_num_subobjs * sizeof (subobj),
|
|
numsubsub * sizeof (subobj), subdb->db_data, tx);
|
|
dmu_buf_rele(subdb, FTAG);
|
|
bpo->bpo_phys->bpo_num_subobjs += numsubsub;
|
|
|
|
dmu_buf_will_dirty(subbpo.bpo_dbuf, tx);
|
|
subbpo.bpo_phys->bpo_subobjs = 0;
|
|
VERIFY3U(0, ==, dmu_object_free(bpo->bpo_os,
|
|
subsubobjs, tx));
|
|
}
|
|
}
|
|
bpo->bpo_phys->bpo_bytes += used;
|
|
bpo->bpo_phys->bpo_comp += comp;
|
|
bpo->bpo_phys->bpo_uncomp += uncomp;
|
|
mutex_exit(&bpo->bpo_lock);
|
|
|
|
bpobj_close(&subbpo);
|
|
}
|
|
|
|
void
|
|
bpobj_enqueue(bpobj_t *bpo, const blkptr_t *bp, dmu_tx_t *tx)
|
|
{
|
|
blkptr_t stored_bp = *bp;
|
|
uint64_t offset;
|
|
int blkoff;
|
|
blkptr_t *bparray;
|
|
|
|
ASSERT(bpobj_is_open(bpo));
|
|
ASSERT(!BP_IS_HOLE(bp));
|
|
ASSERT(bpo->bpo_object != dmu_objset_pool(bpo->bpo_os)->dp_empty_bpobj);
|
|
|
|
if (BP_IS_EMBEDDED(bp)) {
|
|
/*
|
|
* The bpobj will compress better without the payload.
|
|
*
|
|
* Note that we store EMBEDDED bp's because they have an
|
|
* uncompressed size, which must be accounted for. An
|
|
* alternative would be to add their size to bpo_uncomp
|
|
* without storing the bp, but that would create additional
|
|
* complications: bpo_uncomp would be inconsistent with the
|
|
* set of BP's stored, and bpobj_iterate() wouldn't visit
|
|
* all the space accounted for in the bpobj.
|
|
*/
|
|
bzero(&stored_bp, sizeof (stored_bp));
|
|
stored_bp.blk_prop = bp->blk_prop;
|
|
stored_bp.blk_birth = bp->blk_birth;
|
|
} else if (!BP_GET_DEDUP(bp)) {
|
|
/* The bpobj will compress better without the checksum */
|
|
bzero(&stored_bp.blk_cksum, sizeof (stored_bp.blk_cksum));
|
|
}
|
|
|
|
/* We never need the fill count. */
|
|
stored_bp.blk_fill = 0;
|
|
|
|
mutex_enter(&bpo->bpo_lock);
|
|
|
|
offset = bpo->bpo_phys->bpo_num_blkptrs * sizeof (stored_bp);
|
|
blkoff = P2PHASE(bpo->bpo_phys->bpo_num_blkptrs, bpo->bpo_epb);
|
|
|
|
if (bpo->bpo_cached_dbuf == NULL ||
|
|
offset < bpo->bpo_cached_dbuf->db_offset ||
|
|
offset >= bpo->bpo_cached_dbuf->db_offset +
|
|
bpo->bpo_cached_dbuf->db_size) {
|
|
if (bpo->bpo_cached_dbuf)
|
|
dmu_buf_rele(bpo->bpo_cached_dbuf, bpo);
|
|
VERIFY3U(0, ==, dmu_buf_hold(bpo->bpo_os, bpo->bpo_object,
|
|
offset, bpo, &bpo->bpo_cached_dbuf, 0));
|
|
}
|
|
|
|
dmu_buf_will_dirty(bpo->bpo_cached_dbuf, tx);
|
|
bparray = bpo->bpo_cached_dbuf->db_data;
|
|
bparray[blkoff] = stored_bp;
|
|
|
|
dmu_buf_will_dirty(bpo->bpo_dbuf, tx);
|
|
bpo->bpo_phys->bpo_num_blkptrs++;
|
|
bpo->bpo_phys->bpo_bytes +=
|
|
bp_get_dsize_sync(dmu_objset_spa(bpo->bpo_os), bp);
|
|
if (bpo->bpo_havecomp) {
|
|
bpo->bpo_phys->bpo_comp += BP_GET_PSIZE(bp);
|
|
bpo->bpo_phys->bpo_uncomp += BP_GET_UCSIZE(bp);
|
|
}
|
|
mutex_exit(&bpo->bpo_lock);
|
|
}
|
|
|
|
struct space_range_arg {
|
|
spa_t *spa;
|
|
uint64_t mintxg;
|
|
uint64_t maxtxg;
|
|
uint64_t used;
|
|
uint64_t comp;
|
|
uint64_t uncomp;
|
|
};
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
space_range_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
|
|
{
|
|
struct space_range_arg *sra = arg;
|
|
|
|
if (bp->blk_birth > sra->mintxg && bp->blk_birth <= sra->maxtxg) {
|
|
if (dsl_pool_sync_context(spa_get_dsl(sra->spa)))
|
|
sra->used += bp_get_dsize_sync(sra->spa, bp);
|
|
else
|
|
sra->used += bp_get_dsize(sra->spa, bp);
|
|
sra->comp += BP_GET_PSIZE(bp);
|
|
sra->uncomp += BP_GET_UCSIZE(bp);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
bpobj_space(bpobj_t *bpo, uint64_t *usedp, uint64_t *compp, uint64_t *uncompp)
|
|
{
|
|
ASSERT(bpobj_is_open(bpo));
|
|
mutex_enter(&bpo->bpo_lock);
|
|
|
|
*usedp = bpo->bpo_phys->bpo_bytes;
|
|
if (bpo->bpo_havecomp) {
|
|
*compp = bpo->bpo_phys->bpo_comp;
|
|
*uncompp = bpo->bpo_phys->bpo_uncomp;
|
|
mutex_exit(&bpo->bpo_lock);
|
|
return (0);
|
|
} else {
|
|
mutex_exit(&bpo->bpo_lock);
|
|
return (bpobj_space_range(bpo, 0, UINT64_MAX,
|
|
usedp, compp, uncompp));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Return the amount of space in the bpobj which is:
|
|
* mintxg < blk_birth <= maxtxg
|
|
*/
|
|
int
|
|
bpobj_space_range(bpobj_t *bpo, uint64_t mintxg, uint64_t maxtxg,
|
|
uint64_t *usedp, uint64_t *compp, uint64_t *uncompp)
|
|
{
|
|
struct space_range_arg sra = { 0 };
|
|
int err;
|
|
|
|
ASSERT(bpobj_is_open(bpo));
|
|
|
|
/*
|
|
* As an optimization, if they want the whole txg range, just
|
|
* get bpo_bytes rather than iterating over the bps.
|
|
*/
|
|
if (mintxg < TXG_INITIAL && maxtxg == UINT64_MAX && bpo->bpo_havecomp)
|
|
return (bpobj_space(bpo, usedp, compp, uncompp));
|
|
|
|
sra.spa = dmu_objset_spa(bpo->bpo_os);
|
|
sra.mintxg = mintxg;
|
|
sra.maxtxg = maxtxg;
|
|
|
|
err = bpobj_iterate_nofree(bpo, space_range_cb, &sra, NULL);
|
|
*usedp = sra.used;
|
|
*compp = sra.comp;
|
|
*uncompp = sra.uncomp;
|
|
return (err);
|
|
}
|