freebsd-dev/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_ani.c
Adrian Chadd d5c3e61afb Expose the ANI state / statistics using the public ANI function, rather than
the ar9300_* definitions.

.. which of course don't match, and athstats was reading garbage ANI
data.
2015-04-01 04:56:10 +00:00

1305 lines
47 KiB
C

/*
* Copyright (c) 2013 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
* OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
#include "opt_ah.h"
#include "ah.h"
#include "ah_internal.h"
#include "ah_desc.h"
//#include "ah_pktlog.h"
#include "ar9300/ar9300.h"
#include "ar9300/ar9300reg.h"
#include "ar9300/ar9300phy.h"
extern void ar9300_set_rx_filter(struct ath_hal *ah, u_int32_t bits);
extern u_int32_t ar9300_get_rx_filter(struct ath_hal *ah);
#define HAL_ANI_DEBUG 1
/*
* Anti noise immunity support. We track phy errors and react
* to excessive errors by adjusting the noise immunity parameters.
*/
/******************************************************************************
*
* New Ani Algorithm for Station side only
*
*****************************************************************************/
#define HAL_ANI_OFDM_TRIG_HIGH 1000 /* units are errors per second */
#define HAL_ANI_OFDM_TRIG_LOW 400 /* units are errors per second */
#define HAL_ANI_CCK_TRIG_HIGH 600 /* units are errors per second */
#define HAL_ANI_CCK_TRIG_LOW 300 /* units are errors per second */
#define HAL_ANI_USE_OFDM_WEAK_SIG AH_TRUE
#define HAL_ANI_ENABLE_MRC_CCK AH_TRUE /* default is enabled */
#define HAL_ANI_DEF_SPUR_IMMUNE_LVL 3
#define HAL_ANI_DEF_FIRSTEP_LVL 2
#define HAL_ANI_RSSI_THR_HIGH 40
#define HAL_ANI_RSSI_THR_LOW 7
#define HAL_ANI_PERIOD 1000
#define HAL_NOISE_DETECT_PERIOD 100
#define HAL_NOISE_RECOVER_PERIOD 5000
#define HAL_SIG_FIRSTEP_SETTING_MIN 0
#define HAL_SIG_FIRSTEP_SETTING_MAX 20
#define HAL_SIG_SPUR_IMM_SETTING_MIN 0
#define HAL_SIG_SPUR_IMM_SETTING_MAX 22
#define HAL_EP_RND(x, mul) \
((((x) % (mul)) >= ((mul) / 2)) ? ((x) + ((mul) - 1)) / (mul) : (x) / (mul))
#define BEACON_RSSI(ahp) \
HAL_EP_RND(ahp->ah_stats.ast_nodestats.ns_avgbrssi, \
HAL_RSSI_EP_MULTIPLIER)
typedef int TABLE[];
/*
* level: 0 1 2 3 4 5 6 7 8
* firstep_table: lvl 0-8, default 2
*/
static const TABLE firstep_table = { -4, -2, 0, 2, 4, 6, 8, 10, 12};
/* cycpwr_thr1_table: lvl 0-7, default 3 */
static const TABLE cycpwr_thr1_table = { -6, -4, -2, 0, 2, 4, 6, 8 };
/* values here are relative to the INI */
typedef struct _HAL_ANI_OFDM_LEVEL_ENTRY {
int spur_immunity_level;
int fir_step_level;
int ofdm_weak_signal_on;
} HAL_ANI_OFDM_LEVEL_ENTRY;
static const HAL_ANI_OFDM_LEVEL_ENTRY ofdm_level_table[] = {
/* SI FS WS */
{ 0, 0, 1 }, /* lvl 0 */
{ 1, 1, 1 }, /* lvl 1 */
{ 2, 2, 1 }, /* lvl 2 */
{ 3, 2, 1 }, /* lvl 3 (default) */
{ 4, 3, 1 }, /* lvl 4 */
{ 5, 4, 1 }, /* lvl 5 */
{ 6, 5, 1 }, /* lvl 6 */
{ 7, 6, 1 }, /* lvl 7 */
{ 7, 7, 1 }, /* lvl 8 */
{ 7, 8, 0 } /* lvl 9 */
};
#define HAL_ANI_OFDM_NUM_LEVEL \
(sizeof(ofdm_level_table) / sizeof(ofdm_level_table[0]))
#define HAL_ANI_OFDM_MAX_LEVEL (HAL_ANI_OFDM_NUM_LEVEL - 1)
#define HAL_ANI_OFDM_DEF_LEVEL 3 /* default level - matches the INI settings */
typedef struct _HAL_ANI_CCK_LEVEL_ENTRY {
int fir_step_level;
int mrc_cck_on;
} HAL_ANI_CCK_LEVEL_ENTRY;
static const HAL_ANI_CCK_LEVEL_ENTRY cck_level_table[] = {
/* FS MRC-CCK */
{ 0, 1 }, /* lvl 0 */
{ 1, 1 }, /* lvl 1 */
{ 2, 1 }, /* lvl 2 (default) */
{ 3, 1 }, /* lvl 3 */
{ 4, 0 }, /* lvl 4 */
{ 5, 0 }, /* lvl 5 */
{ 6, 0 }, /* lvl 6 */
{ 7, 0 }, /* lvl 7 (only for high rssi) */
{ 8, 0 } /* lvl 8 (only for high rssi) */
};
#define HAL_ANI_CCK_NUM_LEVEL \
(sizeof(cck_level_table) / sizeof(cck_level_table[0]))
#define HAL_ANI_CCK_MAX_LEVEL (HAL_ANI_CCK_NUM_LEVEL - 1)
#define HAL_ANI_CCK_MAX_LEVEL_LOW_RSSI (HAL_ANI_CCK_NUM_LEVEL - 3)
#define HAL_ANI_CCK_DEF_LEVEL 2 /* default level - matches the INI settings */
/*
* register values to turn OFDM weak signal detection OFF
*/
static const int m1_thresh_low_off = 127;
static const int m2_thresh_low_off = 127;
static const int m1_thresh_off = 127;
static const int m2_thresh_off = 127;
static const int m2_count_thr_off = 31;
static const int m2_count_thr_low_off = 63;
static const int m1_thresh_low_ext_off = 127;
static const int m2_thresh_low_ext_off = 127;
static const int m1_thresh_ext_off = 127;
static const int m2_thresh_ext_off = 127;
void
ar9300_enable_mib_counters(struct ath_hal *ah)
{
HALDEBUG(ah, HAL_DEBUG_RESET, "%s: Enable MIB counters\n", __func__);
/* Clear the mib counters and save them in the stats */
ar9300_update_mib_mac_stats(ah);
OS_REG_WRITE(ah, AR_FILT_OFDM, 0);
OS_REG_WRITE(ah, AR_FILT_CCK, 0);
OS_REG_WRITE(ah, AR_MIBC,
~(AR_MIBC_COW | AR_MIBC_FMC | AR_MIBC_CMC | AR_MIBC_MCS) & 0x0f);
OS_REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
OS_REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
}
void
ar9300_disable_mib_counters(struct ath_hal *ah)
{
HALDEBUG(ah, HAL_DEBUG_RESET, "%s: Disabling MIB counters\n", __func__);
OS_REG_WRITE(ah, AR_MIBC, AR_MIBC_FMC | AR_MIBC_CMC);
/* Clear the mib counters and save them in the stats */
ar9300_update_mib_mac_stats(ah);
OS_REG_WRITE(ah, AR_FILT_OFDM, 0);
OS_REG_WRITE(ah, AR_FILT_CCK, 0);
}
/*
* This routine returns the index into the ani_state array that
* corresponds to the channel in *chan. If no match is found and the
* array is still not fully utilized, a new entry is created for the
* channel. We assume the attach function has already initialized the
* ah_ani values and only the channel field needs to be set.
*/
static int
ar9300_get_ani_channel_index(struct ath_hal *ah,
const struct ieee80211_channel *chan)
{
struct ath_hal_9300 *ahp = AH9300(ah);
int i;
for (i = 0; i < ARRAY_LENGTH(ahp->ah_ani); i++) {
/* XXX this doesn't distinguish between 20/40 channels */
if (ahp->ah_ani[i].c.ic_freq == chan->ic_freq) {
return i;
}
if (ahp->ah_ani[i].c.ic_freq == 0) {
ahp->ah_ani[i].c.ic_freq = chan->ic_freq;
ahp->ah_ani[i].c.ic_flags = chan->ic_flags;
return i;
}
}
/* XXX statistic */
HALDEBUG(ah, HAL_DEBUG_UNMASKABLE,
"%s: No more channel states left. Using channel 0\n", __func__);
return 0; /* XXX gotta return something valid */
}
/*
* Return the current ANI state of the channel we're on
*/
struct ar9300_ani_state *
ar9300_ani_get_current_state(struct ath_hal *ah)
{
return AH9300(ah)->ah_curani;
}
/*
* Return the current statistics.
*/
HAL_ANI_STATS *
ar9300_ani_get_current_stats(struct ath_hal *ah)
{
return &AH9300(ah)->ah_stats;
}
/*
* Setup ANI handling. Sets all thresholds and levels to default level AND
* resets the channel statistics
*/
void
ar9300_ani_attach(struct ath_hal *ah)
{
struct ath_hal_9300 *ahp = AH9300(ah);
int i;
OS_MEMZERO(ahp->ah_ani, sizeof(ahp->ah_ani));
for (i = 0; i < ARRAY_LENGTH(ahp->ah_ani); i++) {
ahp->ah_ani[i].ofdm_trig_high = HAL_ANI_OFDM_TRIG_HIGH;
ahp->ah_ani[i].ofdm_trig_low = HAL_ANI_OFDM_TRIG_LOW;
ahp->ah_ani[i].cck_trig_high = HAL_ANI_CCK_TRIG_HIGH;
ahp->ah_ani[i].cck_trig_low = HAL_ANI_CCK_TRIG_LOW;
ahp->ah_ani[i].rssi_thr_high = HAL_ANI_RSSI_THR_HIGH;
ahp->ah_ani[i].rssi_thr_low = HAL_ANI_RSSI_THR_LOW;
ahp->ah_ani[i].ofdm_noise_immunity_level = HAL_ANI_OFDM_DEF_LEVEL;
ahp->ah_ani[i].cck_noise_immunity_level = HAL_ANI_CCK_DEF_LEVEL;
ahp->ah_ani[i].ofdm_weak_sig_detect_off = !HAL_ANI_USE_OFDM_WEAK_SIG;
ahp->ah_ani[i].spur_immunity_level = HAL_ANI_DEF_SPUR_IMMUNE_LVL;
ahp->ah_ani[i].firstep_level = HAL_ANI_DEF_FIRSTEP_LVL;
ahp->ah_ani[i].mrc_cck_off = !HAL_ANI_ENABLE_MRC_CCK;
ahp->ah_ani[i].ofdms_turn = AH_TRUE;
ahp->ah_ani[i].must_restore = AH_FALSE;
}
/*
* Since we expect some ongoing maintenance on the tables,
* let's sanity check here.
* The default level should not modify INI setting.
*/
HALASSERT(firstep_table[HAL_ANI_DEF_FIRSTEP_LVL] == 0);
HALASSERT(cycpwr_thr1_table[HAL_ANI_DEF_SPUR_IMMUNE_LVL] == 0);
HALASSERT(
ofdm_level_table[HAL_ANI_OFDM_DEF_LEVEL].fir_step_level ==
HAL_ANI_DEF_FIRSTEP_LVL);
HALASSERT(
ofdm_level_table[HAL_ANI_OFDM_DEF_LEVEL].spur_immunity_level ==
HAL_ANI_DEF_SPUR_IMMUNE_LVL);
HALASSERT(
cck_level_table[HAL_ANI_CCK_DEF_LEVEL].fir_step_level ==
HAL_ANI_DEF_FIRSTEP_LVL);
/* Initialize and enable MIB Counters */
OS_REG_WRITE(ah, AR_PHY_ERR_1, 0);
OS_REG_WRITE(ah, AR_PHY_ERR_2, 0);
ar9300_enable_mib_counters(ah);
ahp->ah_ani_period = HAL_ANI_PERIOD;
if (ah->ah_config.ath_hal_enable_ani) {
ahp->ah_proc_phy_err |= HAL_PROCESS_ANI;
}
}
/*
* Cleanup any ANI state setup.
*/
void
ar9300_ani_detach(struct ath_hal *ah)
{
HALDEBUG(ah, HAL_DEBUG_ANI, "%s: Detaching Ani\n", __func__);
ar9300_disable_mib_counters(ah);
OS_REG_WRITE(ah, AR_PHY_ERR_1, 0);
OS_REG_WRITE(ah, AR_PHY_ERR_2, 0);
}
/*
* Initialize the ANI register values with default (ini) values.
* This routine is called during a (full) hardware reset after
* all the registers are initialised from the INI.
*/
void
ar9300_ani_init_defaults(struct ath_hal *ah, HAL_HT_MACMODE macmode)
{
struct ath_hal_9300 *ahp = AH9300(ah);
struct ar9300_ani_state *ani_state;
const struct ieee80211_channel *chan = AH_PRIVATE(ah)->ah_curchan;
int index;
u_int32_t val;
HALASSERT(chan != AH_NULL);
index = ar9300_get_ani_channel_index(ah, chan);
ani_state = &ahp->ah_ani[index];
ahp->ah_curani = ani_state;
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: ver %d.%d opmode %u chan %d Mhz/0x%x macmode %d\n",
__func__, AH_PRIVATE(ah)->ah_macVersion, AH_PRIVATE(ah)->ah_macRev,
AH_PRIVATE(ah)->ah_opmode, chan->ic_freq, chan->ic_flags, macmode);
val = OS_REG_READ(ah, AR_PHY_SFCORR);
ani_state->ini_def.m1_thresh = MS(val, AR_PHY_SFCORR_M1_THRESH);
ani_state->ini_def.m2_thresh = MS(val, AR_PHY_SFCORR_M2_THRESH);
ani_state->ini_def.m2_count_thr = MS(val, AR_PHY_SFCORR_M2COUNT_THR);
val = OS_REG_READ(ah, AR_PHY_SFCORR_LOW);
ani_state->ini_def.m1_thresh_low =
MS(val, AR_PHY_SFCORR_LOW_M1_THRESH_LOW);
ani_state->ini_def.m2_thresh_low =
MS(val, AR_PHY_SFCORR_LOW_M2_THRESH_LOW);
ani_state->ini_def.m2_count_thr_low =
MS(val, AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW);
val = OS_REG_READ(ah, AR_PHY_SFCORR_EXT);
ani_state->ini_def.m1_thresh_ext = MS(val, AR_PHY_SFCORR_EXT_M1_THRESH);
ani_state->ini_def.m2_thresh_ext = MS(val, AR_PHY_SFCORR_EXT_M2_THRESH);
ani_state->ini_def.m1_thresh_low_ext =
MS(val, AR_PHY_SFCORR_EXT_M1_THRESH_LOW);
ani_state->ini_def.m2_thresh_low_ext =
MS(val, AR_PHY_SFCORR_EXT_M2_THRESH_LOW);
ani_state->ini_def.firstep =
OS_REG_READ_FIELD(ah, AR_PHY_FIND_SIG, AR_PHY_FIND_SIG_FIRSTEP);
ani_state->ini_def.firstep_low =
OS_REG_READ_FIELD(
ah, AR_PHY_FIND_SIG_LOW, AR_PHY_FIND_SIG_LOW_FIRSTEP_LOW);
ani_state->ini_def.cycpwr_thr1 =
OS_REG_READ_FIELD(ah, AR_PHY_TIMING5, AR_PHY_TIMING5_CYCPWR_THR1);
ani_state->ini_def.cycpwr_thr1_ext =
OS_REG_READ_FIELD(ah, AR_PHY_EXT_CCA, AR_PHY_EXT_CYCPWR_THR1);
/* these levels just got reset to defaults by the INI */
ani_state->spur_immunity_level = HAL_ANI_DEF_SPUR_IMMUNE_LVL;
ani_state->firstep_level = HAL_ANI_DEF_FIRSTEP_LVL;
ani_state->ofdm_weak_sig_detect_off = !HAL_ANI_USE_OFDM_WEAK_SIG;
ani_state->mrc_cck_off = !HAL_ANI_ENABLE_MRC_CCK;
ani_state->cycle_count = 0;
}
/*
* Set the ANI settings to match an OFDM level.
*/
static void
ar9300_ani_set_odfm_noise_immunity_level(struct ath_hal *ah,
u_int8_t ofdm_noise_immunity_level)
{
struct ath_hal_9300 *ahp = AH9300(ah);
struct ar9300_ani_state *ani_state = ahp->ah_curani;
ani_state->rssi = BEACON_RSSI(ahp);
HALDEBUG(ah, HAL_DEBUG_ANI,
"**** %s: ofdmlevel %d=>%d, rssi=%d[lo=%d hi=%d]\n", __func__,
ani_state->ofdm_noise_immunity_level, ofdm_noise_immunity_level,
ani_state->rssi, ani_state->rssi_thr_low, ani_state->rssi_thr_high);
ani_state->ofdm_noise_immunity_level = ofdm_noise_immunity_level;
if (ani_state->spur_immunity_level !=
ofdm_level_table[ofdm_noise_immunity_level].spur_immunity_level)
{
ar9300_ani_control(
ah, HAL_ANI_SPUR_IMMUNITY_LEVEL,
ofdm_level_table[ofdm_noise_immunity_level].spur_immunity_level);
}
if (ani_state->firstep_level !=
ofdm_level_table[ofdm_noise_immunity_level].fir_step_level &&
ofdm_level_table[ofdm_noise_immunity_level].fir_step_level >=
cck_level_table[ani_state->cck_noise_immunity_level].fir_step_level)
{
ar9300_ani_control(
ah, HAL_ANI_FIRSTEP_LEVEL,
ofdm_level_table[ofdm_noise_immunity_level].fir_step_level);
}
if ((AH_PRIVATE(ah)->ah_opmode != HAL_M_STA ||
ani_state->rssi <= ani_state->rssi_thr_high))
{
if (ani_state->ofdm_weak_sig_detect_off) {
/*
* force on ofdm weak sig detect.
*/
ar9300_ani_control(ah, HAL_ANI_OFDM_WEAK_SIGNAL_DETECTION, AH_TRUE);
}
} else if (ani_state->ofdm_weak_sig_detect_off ==
ofdm_level_table[ofdm_noise_immunity_level].ofdm_weak_signal_on)
{
ar9300_ani_control(
ah, HAL_ANI_OFDM_WEAK_SIGNAL_DETECTION,
ofdm_level_table[ofdm_noise_immunity_level].ofdm_weak_signal_on);
}
}
/*
* Set the ANI settings to match a CCK level.
*/
static void
ar9300_ani_set_cck_noise_immunity_level(struct ath_hal *ah,
u_int8_t cck_noise_immunity_level)
{
struct ath_hal_9300 *ahp = AH9300(ah);
struct ar9300_ani_state *ani_state = ahp->ah_curani;
int level;
ani_state->rssi = BEACON_RSSI(ahp);
HALDEBUG(ah, HAL_DEBUG_ANI,
"**** %s: ccklevel %d=>%d, rssi=%d[lo=%d hi=%d]\n",
__func__, ani_state->cck_noise_immunity_level, cck_noise_immunity_level,
ani_state->rssi, ani_state->rssi_thr_low, ani_state->rssi_thr_high);
if (AH_PRIVATE(ah)->ah_opmode == HAL_M_STA &&
ani_state->rssi <= ani_state->rssi_thr_low &&
cck_noise_immunity_level > HAL_ANI_CCK_MAX_LEVEL_LOW_RSSI)
{
cck_noise_immunity_level = HAL_ANI_CCK_MAX_LEVEL_LOW_RSSI;
}
ani_state->cck_noise_immunity_level = cck_noise_immunity_level;
level = ani_state->ofdm_noise_immunity_level;
if (ani_state->firstep_level !=
cck_level_table[cck_noise_immunity_level].fir_step_level &&
cck_level_table[cck_noise_immunity_level].fir_step_level >=
ofdm_level_table[level].fir_step_level)
{
ar9300_ani_control(
ah, HAL_ANI_FIRSTEP_LEVEL,
cck_level_table[cck_noise_immunity_level].fir_step_level);
}
if (ani_state->mrc_cck_off ==
cck_level_table[cck_noise_immunity_level].mrc_cck_on)
{
ar9300_ani_control(
ah, HAL_ANI_MRC_CCK,
cck_level_table[cck_noise_immunity_level].mrc_cck_on);
}
}
/*
* Control Adaptive Noise Immunity Parameters
*/
HAL_BOOL
ar9300_ani_control(struct ath_hal *ah, HAL_ANI_CMD cmd, int param)
{
struct ath_hal_9300 *ahp = AH9300(ah);
struct ar9300_ani_state *ani_state = ahp->ah_curani;
const struct ieee80211_channel *chan = AH_PRIVATE(ah)->ah_curchan;
int32_t value, value2;
u_int level = param;
u_int is_on;
if (chan == NULL && cmd != HAL_ANI_MODE) {
HALDEBUG(ah, HAL_DEBUG_UNMASKABLE,
"%s: ignoring cmd 0x%02x - no channel\n", __func__, cmd);
return AH_FALSE;
}
switch (cmd & ahp->ah_ani_function) {
case HAL_ANI_OFDM_WEAK_SIGNAL_DETECTION:
{
int m1_thresh_low, m2_thresh_low;
int m1_thresh, m2_thresh;
int m2_count_thr, m2_count_thr_low;
int m1_thresh_low_ext, m2_thresh_low_ext;
int m1_thresh_ext, m2_thresh_ext;
/*
* is_on == 1 means ofdm weak signal detection is ON
* (default, less noise imm)
* is_on == 0 means ofdm weak signal detection is OFF
* (more noise imm)
*/
is_on = param ? 1 : 0;
if (AR_SREV_JUPITER(ah) || AR_SREV_APHRODITE(ah))
goto skip_ws_det;
/*
* make register setting for default (weak sig detect ON)
* come from INI file
*/
m1_thresh_low = is_on ?
ani_state->ini_def.m1_thresh_low : m1_thresh_low_off;
m2_thresh_low = is_on ?
ani_state->ini_def.m2_thresh_low : m2_thresh_low_off;
m1_thresh = is_on ?
ani_state->ini_def.m1_thresh : m1_thresh_off;
m2_thresh = is_on ?
ani_state->ini_def.m2_thresh : m2_thresh_off;
m2_count_thr = is_on ?
ani_state->ini_def.m2_count_thr : m2_count_thr_off;
m2_count_thr_low = is_on ?
ani_state->ini_def.m2_count_thr_low : m2_count_thr_low_off;
m1_thresh_low_ext = is_on ?
ani_state->ini_def.m1_thresh_low_ext : m1_thresh_low_ext_off;
m2_thresh_low_ext = is_on ?
ani_state->ini_def.m2_thresh_low_ext : m2_thresh_low_ext_off;
m1_thresh_ext = is_on ?
ani_state->ini_def.m1_thresh_ext : m1_thresh_ext_off;
m2_thresh_ext = is_on ?
ani_state->ini_def.m2_thresh_ext : m2_thresh_ext_off;
OS_REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
AR_PHY_SFCORR_LOW_M1_THRESH_LOW, m1_thresh_low);
OS_REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
AR_PHY_SFCORR_LOW_M2_THRESH_LOW, m2_thresh_low);
OS_REG_RMW_FIELD(ah, AR_PHY_SFCORR, AR_PHY_SFCORR_M1_THRESH,
m1_thresh);
OS_REG_RMW_FIELD(ah, AR_PHY_SFCORR, AR_PHY_SFCORR_M2_THRESH,
m2_thresh);
OS_REG_RMW_FIELD(ah, AR_PHY_SFCORR, AR_PHY_SFCORR_M2COUNT_THR,
m2_count_thr);
OS_REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW, m2_count_thr_low);
OS_REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
AR_PHY_SFCORR_EXT_M1_THRESH_LOW, m1_thresh_low_ext);
OS_REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
AR_PHY_SFCORR_EXT_M2_THRESH_LOW, m2_thresh_low_ext);
OS_REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT, AR_PHY_SFCORR_EXT_M1_THRESH,
m1_thresh_ext);
OS_REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT, AR_PHY_SFCORR_EXT_M2_THRESH,
m2_thresh_ext);
skip_ws_det:
if (is_on) {
OS_REG_SET_BIT(ah, AR_PHY_SFCORR_LOW,
AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
} else {
OS_REG_CLR_BIT(ah, AR_PHY_SFCORR_LOW,
AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
}
if (!is_on != ani_state->ofdm_weak_sig_detect_off) {
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: ** ch %d: ofdm weak signal: %s=>%s\n",
__func__, chan->ic_freq,
!ani_state->ofdm_weak_sig_detect_off ? "on" : "off",
is_on ? "on" : "off");
if (is_on) {
ahp->ah_stats.ast_ani_ofdmon++;
} else {
ahp->ah_stats.ast_ani_ofdmoff++;
}
ani_state->ofdm_weak_sig_detect_off = !is_on;
}
break;
}
case HAL_ANI_FIRSTEP_LEVEL:
if (level >= ARRAY_LENGTH(firstep_table)) {
HALDEBUG(ah, HAL_DEBUG_UNMASKABLE,
"%s: HAL_ANI_FIRSTEP_LEVEL level out of range (%u > %u)\n",
__func__, level, (unsigned) ARRAY_LENGTH(firstep_table));
return AH_FALSE;
}
/*
* make register setting relative to default
* from INI file & cap value
*/
value =
firstep_table[level] -
firstep_table[HAL_ANI_DEF_FIRSTEP_LVL] +
ani_state->ini_def.firstep;
if (value < HAL_SIG_FIRSTEP_SETTING_MIN) {
value = HAL_SIG_FIRSTEP_SETTING_MIN;
}
if (value > HAL_SIG_FIRSTEP_SETTING_MAX) {
value = HAL_SIG_FIRSTEP_SETTING_MAX;
}
OS_REG_RMW_FIELD(ah, AR_PHY_FIND_SIG, AR_PHY_FIND_SIG_FIRSTEP, value);
/*
* we need to set first step low register too
* make register setting relative to default from INI file & cap value
*/
value2 =
firstep_table[level] -
firstep_table[HAL_ANI_DEF_FIRSTEP_LVL] +
ani_state->ini_def.firstep_low;
if (value2 < HAL_SIG_FIRSTEP_SETTING_MIN) {
value2 = HAL_SIG_FIRSTEP_SETTING_MIN;
}
if (value2 > HAL_SIG_FIRSTEP_SETTING_MAX) {
value2 = HAL_SIG_FIRSTEP_SETTING_MAX;
}
OS_REG_RMW_FIELD(ah, AR_PHY_FIND_SIG_LOW,
AR_PHY_FIND_SIG_LOW_FIRSTEP_LOW, value2);
if (level != ani_state->firstep_level) {
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: ** ch %d: level %d=>%d[def:%d] firstep[level]=%d ini=%d\n",
__func__, chan->ic_freq, ani_state->firstep_level, level,
HAL_ANI_DEF_FIRSTEP_LVL, value, ani_state->ini_def.firstep);
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: ** ch %d: level %d=>%d[def:%d] "
"firstep_low[level]=%d ini=%d\n",
__func__, chan->ic_freq, ani_state->firstep_level, level,
HAL_ANI_DEF_FIRSTEP_LVL, value2,
ani_state->ini_def.firstep_low);
if (level > ani_state->firstep_level) {
ahp->ah_stats.ast_ani_stepup++;
} else if (level < ani_state->firstep_level) {
ahp->ah_stats.ast_ani_stepdown++;
}
ani_state->firstep_level = level;
}
break;
case HAL_ANI_SPUR_IMMUNITY_LEVEL:
if (level >= ARRAY_LENGTH(cycpwr_thr1_table)) {
HALDEBUG(ah, HAL_DEBUG_UNMASKABLE,
"%s: HAL_ANI_SPUR_IMMUNITY_LEVEL level "
"out of range (%u > %u)\n",
__func__, level, (unsigned) ARRAY_LENGTH(cycpwr_thr1_table));
return AH_FALSE;
}
/*
* make register setting relative to default from INI file & cap value
*/
value =
cycpwr_thr1_table[level] -
cycpwr_thr1_table[HAL_ANI_DEF_SPUR_IMMUNE_LVL] +
ani_state->ini_def.cycpwr_thr1;
if (value < HAL_SIG_SPUR_IMM_SETTING_MIN) {
value = HAL_SIG_SPUR_IMM_SETTING_MIN;
}
if (value > HAL_SIG_SPUR_IMM_SETTING_MAX) {
value = HAL_SIG_SPUR_IMM_SETTING_MAX;
}
OS_REG_RMW_FIELD(ah, AR_PHY_TIMING5, AR_PHY_TIMING5_CYCPWR_THR1, value);
/*
* set AR_PHY_EXT_CCA for extension channel
* make register setting relative to default from INI file & cap value
*/
value2 =
cycpwr_thr1_table[level] -
cycpwr_thr1_table[HAL_ANI_DEF_SPUR_IMMUNE_LVL] +
ani_state->ini_def.cycpwr_thr1_ext;
if (value2 < HAL_SIG_SPUR_IMM_SETTING_MIN) {
value2 = HAL_SIG_SPUR_IMM_SETTING_MIN;
}
if (value2 > HAL_SIG_SPUR_IMM_SETTING_MAX) {
value2 = HAL_SIG_SPUR_IMM_SETTING_MAX;
}
OS_REG_RMW_FIELD(ah, AR_PHY_EXT_CCA, AR_PHY_EXT_CYCPWR_THR1, value2);
if (level != ani_state->spur_immunity_level) {
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: ** ch %d: level %d=>%d[def:%d] "
"cycpwr_thr1[level]=%d ini=%d\n",
__func__, chan->ic_freq, ani_state->spur_immunity_level, level,
HAL_ANI_DEF_SPUR_IMMUNE_LVL, value,
ani_state->ini_def.cycpwr_thr1);
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: ** ch %d: level %d=>%d[def:%d] "
"cycpwr_thr1_ext[level]=%d ini=%d\n",
__func__, chan->ic_freq, ani_state->spur_immunity_level, level,
HAL_ANI_DEF_SPUR_IMMUNE_LVL, value2,
ani_state->ini_def.cycpwr_thr1_ext);
if (level > ani_state->spur_immunity_level) {
ahp->ah_stats.ast_ani_spurup++;
} else if (level < ani_state->spur_immunity_level) {
ahp->ah_stats.ast_ani_spurdown++;
}
ani_state->spur_immunity_level = level;
}
break;
case HAL_ANI_MRC_CCK:
/*
* is_on == 1 means MRC CCK ON (default, less noise imm)
* is_on == 0 means MRC CCK is OFF (more noise imm)
*/
is_on = param ? 1 : 0;
if (!AR_SREV_POSEIDON(ah)) {
OS_REG_RMW_FIELD(ah, AR_PHY_MRC_CCK_CTRL,
AR_PHY_MRC_CCK_ENABLE, is_on);
OS_REG_RMW_FIELD(ah, AR_PHY_MRC_CCK_CTRL,
AR_PHY_MRC_CCK_MUX_REG, is_on);
}
if (!is_on != ani_state->mrc_cck_off) {
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: ** ch %d: MRC CCK: %s=>%s\n", __func__, chan->ic_freq,
!ani_state->mrc_cck_off ? "on" : "off", is_on ? "on" : "off");
if (is_on) {
ahp->ah_stats.ast_ani_ccklow++;
} else {
ahp->ah_stats.ast_ani_cckhigh++;
}
ani_state->mrc_cck_off = !is_on;
}
break;
case HAL_ANI_PRESENT:
break;
#ifdef AH_PRIVATE_DIAG
case HAL_ANI_MODE:
if (param == 0) {
ahp->ah_proc_phy_err &= ~HAL_PROCESS_ANI;
/* Turn off HW counters if we have them */
ar9300_ani_detach(ah);
if (AH_PRIVATE(ah)->ah_curchan == NULL) {
return AH_TRUE;
}
/* if we're turning off ANI, reset regs back to INI settings */
if (ah->ah_config.ath_hal_enable_ani) {
HAL_ANI_CMD savefunc = ahp->ah_ani_function;
/* temporarly allow all functions so we can reset */
ahp->ah_ani_function = HAL_ANI_ALL;
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: disable all ANI functions\n", __func__);
ar9300_ani_set_odfm_noise_immunity_level(
ah, HAL_ANI_OFDM_DEF_LEVEL);
ar9300_ani_set_cck_noise_immunity_level(
ah, HAL_ANI_CCK_DEF_LEVEL);
ahp->ah_ani_function = savefunc;
}
} else { /* normal/auto mode */
HALDEBUG(ah, HAL_DEBUG_ANI, "%s: enabled\n", __func__);
ahp->ah_proc_phy_err |= HAL_PROCESS_ANI;
if (AH_PRIVATE(ah)->ah_curchan == NULL) {
return AH_TRUE;
}
ar9300_enable_mib_counters(ah);
ar9300_ani_reset(ah, AH_FALSE);
ani_state = ahp->ah_curani;
}
HALDEBUG(ah, HAL_DEBUG_ANI, "5 ANC: ahp->ah_proc_phy_err %x \n",
ahp->ah_proc_phy_err);
break;
case HAL_ANI_PHYERR_RESET:
ahp->ah_stats.ast_ani_ofdmerrs = 0;
ahp->ah_stats.ast_ani_cckerrs = 0;
break;
#endif /* AH_PRIVATE_DIAG */
default:
#if HAL_ANI_DEBUG
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: invalid cmd 0x%02x (allowed=0x%02x)\n",
__func__, cmd, ahp->ah_ani_function);
#endif
return AH_FALSE;
}
#if HAL_ANI_DEBUG
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: ANI parameters: SI=%d, ofdm_ws=%s FS=%d MRCcck=%s listen_time=%d "
"CC=%d listen=%d ofdm_errs=%d cck_errs=%d\n",
__func__, ani_state->spur_immunity_level,
!ani_state->ofdm_weak_sig_detect_off ? "on" : "off",
ani_state->firstep_level, !ani_state->mrc_cck_off ? "on" : "off",
ani_state->listen_time, ani_state->cycle_count,
ani_state->listen_time, ani_state->ofdm_phy_err_count,
ani_state->cck_phy_err_count);
#endif
#ifndef REMOVE_PKT_LOG
/* do pktlog */
{
struct log_ani log_data;
/* Populate the ani log record */
log_data.phy_stats_disable = DO_ANI(ah);
log_data.noise_immun_lvl = ani_state->ofdm_noise_immunity_level;
log_data.spur_immun_lvl = ani_state->spur_immunity_level;
log_data.ofdm_weak_det = ani_state->ofdm_weak_sig_detect_off;
log_data.cck_weak_thr = ani_state->cck_noise_immunity_level;
log_data.fir_lvl = ani_state->firstep_level;
log_data.listen_time = ani_state->listen_time;
log_data.cycle_count = ani_state->cycle_count;
/* express ofdm_phy_err_count as errors/second */
log_data.ofdm_phy_err_count = ani_state->listen_time ?
ani_state->ofdm_phy_err_count * 1000 / ani_state->listen_time : 0;
/* express cck_phy_err_count as errors/second */
log_data.cck_phy_err_count = ani_state->listen_time ?
ani_state->cck_phy_err_count * 1000 / ani_state->listen_time : 0;
log_data.rssi = ani_state->rssi;
/* clear interrupt context flag */
ath_hal_log_ani(AH_PRIVATE(ah)->ah_sc, &log_data, 0);
}
#endif
return AH_TRUE;
}
static void
ar9300_ani_restart(struct ath_hal *ah)
{
struct ath_hal_9300 *ahp = AH9300(ah);
struct ar9300_ani_state *ani_state;
if (!DO_ANI(ah)) {
return;
}
ani_state = ahp->ah_curani;
ani_state->listen_time = 0;
OS_REG_WRITE(ah, AR_PHY_ERR_1, 0);
OS_REG_WRITE(ah, AR_PHY_ERR_2, 0);
OS_REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
OS_REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
/* Clear the mib counters and save them in the stats */
ar9300_update_mib_mac_stats(ah);
ani_state->ofdm_phy_err_count = 0;
ani_state->cck_phy_err_count = 0;
}
static void
ar9300_ani_ofdm_err_trigger(struct ath_hal *ah)
{
struct ath_hal_9300 *ahp = AH9300(ah);
struct ar9300_ani_state *ani_state;
if (!DO_ANI(ah)) {
return;
}
ani_state = ahp->ah_curani;
if (ani_state->ofdm_noise_immunity_level < HAL_ANI_OFDM_MAX_LEVEL) {
ar9300_ani_set_odfm_noise_immunity_level(
ah, ani_state->ofdm_noise_immunity_level + 1);
}
}
static void
ar9300_ani_cck_err_trigger(struct ath_hal *ah)
{
struct ath_hal_9300 *ahp = AH9300(ah);
struct ar9300_ani_state *ani_state;
if (!DO_ANI(ah)) {
return;
}
ani_state = ahp->ah_curani;
if (ani_state->cck_noise_immunity_level < HAL_ANI_CCK_MAX_LEVEL) {
ar9300_ani_set_cck_noise_immunity_level(
ah, ani_state->cck_noise_immunity_level + 1);
}
}
/*
* Restore the ANI parameters in the HAL and reset the statistics.
* This routine should be called for every hardware reset and for
* every channel change.
*/
void
ar9300_ani_reset(struct ath_hal *ah, HAL_BOOL is_scanning)
{
struct ath_hal_9300 *ahp = AH9300(ah);
struct ar9300_ani_state *ani_state;
const struct ieee80211_channel *chan = AH_PRIVATE(ah)->ah_curchan;
HAL_CHANNEL_INTERNAL *ichan = ath_hal_checkchannel(ah, chan);
int index;
HALASSERT(chan != AH_NULL);
if (!DO_ANI(ah)) {
return;
}
/*
* we need to re-point to the correct ANI state since the channel
* may have changed due to a fast channel change
*/
index = ar9300_get_ani_channel_index(ah, chan);
ani_state = &ahp->ah_ani[index];
HALASSERT(ani_state != AH_NULL);
ahp->ah_curani = ani_state;
ahp->ah_stats.ast_ani_reset++;
ani_state->phy_noise_spur = 0;
/* only allow a subset of functions in AP mode */
if (AH_PRIVATE(ah)->ah_opmode == HAL_M_HOSTAP) {
if (IS_CHAN_2GHZ(ichan)) {
ahp->ah_ani_function = (HAL_ANI_SPUR_IMMUNITY_LEVEL |
HAL_ANI_FIRSTEP_LEVEL |
HAL_ANI_MRC_CCK);
} else {
ahp->ah_ani_function = 0;
}
}
/* always allow mode (on/off) to be controlled */
ahp->ah_ani_function |= HAL_ANI_MODE;
if (is_scanning ||
(AH_PRIVATE(ah)->ah_opmode != HAL_M_STA &&
AH_PRIVATE(ah)->ah_opmode != HAL_M_IBSS))
{
/*
* If we're scanning or in AP mode, the defaults (ini) should be
* in place.
* For an AP we assume the historical levels for this channel are
* probably outdated so start from defaults instead.
*/
if (ani_state->ofdm_noise_immunity_level != HAL_ANI_OFDM_DEF_LEVEL ||
ani_state->cck_noise_immunity_level != HAL_ANI_CCK_DEF_LEVEL)
{
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: Restore defaults: opmode %u chan %d Mhz/0x%x "
"is_scanning=%d restore=%d ofdm:%d cck:%d\n",
__func__, AH_PRIVATE(ah)->ah_opmode, chan->ic_freq,
chan->ic_flags, is_scanning, ani_state->must_restore,
ani_state->ofdm_noise_immunity_level,
ani_state->cck_noise_immunity_level);
/*
* for STA/IBSS, we want to restore the historical values later
* (when we're not scanning)
*/
if (AH_PRIVATE(ah)->ah_opmode == HAL_M_STA ||
AH_PRIVATE(ah)->ah_opmode == HAL_M_IBSS)
{
ar9300_ani_control(ah, HAL_ANI_SPUR_IMMUNITY_LEVEL,
HAL_ANI_DEF_SPUR_IMMUNE_LVL);
ar9300_ani_control(
ah, HAL_ANI_FIRSTEP_LEVEL, HAL_ANI_DEF_FIRSTEP_LVL);
ar9300_ani_control(ah, HAL_ANI_OFDM_WEAK_SIGNAL_DETECTION,
HAL_ANI_USE_OFDM_WEAK_SIG);
ar9300_ani_control(ah, HAL_ANI_MRC_CCK, HAL_ANI_ENABLE_MRC_CCK);
ani_state->must_restore = AH_TRUE;
} else {
ar9300_ani_set_odfm_noise_immunity_level(
ah, HAL_ANI_OFDM_DEF_LEVEL);
ar9300_ani_set_cck_noise_immunity_level(
ah, HAL_ANI_CCK_DEF_LEVEL);
}
}
} else {
/*
* restore historical levels for this channel
*/
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: Restore history: opmode %u chan %d Mhz/0x%x is_scanning=%d "
"restore=%d ofdm:%d cck:%d\n",
__func__, AH_PRIVATE(ah)->ah_opmode, chan->ic_freq,
chan->ic_flags, is_scanning, ani_state->must_restore,
ani_state->ofdm_noise_immunity_level,
ani_state->cck_noise_immunity_level);
ar9300_ani_set_odfm_noise_immunity_level(
ah, ani_state->ofdm_noise_immunity_level);
ar9300_ani_set_cck_noise_immunity_level(
ah, ani_state->cck_noise_immunity_level);
ani_state->must_restore = AH_FALSE;
}
/* enable phy counters */
ar9300_ani_restart(ah);
OS_REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
OS_REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
}
/*
* Process a MIB interrupt. We may potentially be invoked because
* any of the MIB counters overflow/trigger so don't assume we're
* here because a PHY error counter triggered.
*/
void
ar9300_process_mib_intr(struct ath_hal *ah, const HAL_NODE_STATS *stats)
{
struct ath_hal_9300 *ahp = AH9300(ah);
u_int32_t phy_cnt1, phy_cnt2;
#if 0
HALDEBUG(ah, HAL_DEBUG_ANI, "%s: Processing Mib Intr\n", __func__);
#endif
/* Reset these counters regardless */
OS_REG_WRITE(ah, AR_FILT_OFDM, 0);
OS_REG_WRITE(ah, AR_FILT_CCK, 0);
if (!(OS_REG_READ(ah, AR_SLP_MIB_CTRL) & AR_SLP_MIB_PENDING)) {
OS_REG_WRITE(ah, AR_SLP_MIB_CTRL, AR_SLP_MIB_CLEAR);
}
/* Clear the mib counters and save them in the stats */
ar9300_update_mib_mac_stats(ah);
ahp->ah_stats.ast_nodestats = *stats;
if (!DO_ANI(ah)) {
/*
* We must always clear the interrupt cause by resetting
* the phy error regs.
*/
OS_REG_WRITE(ah, AR_PHY_ERR_1, 0);
OS_REG_WRITE(ah, AR_PHY_ERR_2, 0);
return;
}
/* NB: these are not reset-on-read */
phy_cnt1 = OS_REG_READ(ah, AR_PHY_ERR_1);
phy_cnt2 = OS_REG_READ(ah, AR_PHY_ERR_2);
#if HAL_ANI_DEBUG
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: Errors: OFDM=0x%08x-0x0=%d CCK=0x%08x-0x0=%d\n",
__func__, phy_cnt1, phy_cnt1, phy_cnt2, phy_cnt2);
#endif
if (((phy_cnt1 & AR_MIBCNT_INTRMASK) == AR_MIBCNT_INTRMASK) ||
((phy_cnt2 & AR_MIBCNT_INTRMASK) == AR_MIBCNT_INTRMASK)) {
/* NB: always restart to insure the h/w counters are reset */
ar9300_ani_restart(ah);
}
}
static void
ar9300_ani_lower_immunity(struct ath_hal *ah)
{
struct ath_hal_9300 *ahp = AH9300(ah);
struct ar9300_ani_state *ani_state = ahp->ah_curani;
if (ani_state->ofdm_noise_immunity_level > 0 &&
(ani_state->ofdms_turn || ani_state->cck_noise_immunity_level == 0)) {
/*
* lower OFDM noise immunity
*/
ar9300_ani_set_odfm_noise_immunity_level(
ah, ani_state->ofdm_noise_immunity_level - 1);
/*
* only lower either OFDM or CCK errors per turn
* we lower the other one next time
*/
return;
}
if (ani_state->cck_noise_immunity_level > 0) {
/*
* lower CCK noise immunity
*/
ar9300_ani_set_cck_noise_immunity_level(
ah, ani_state->cck_noise_immunity_level - 1);
}
}
/* convert HW counter values to ms using mode specifix clock rate */
//#define CLOCK_RATE(_ah) (ath_hal_chan_2_clock_rate_mhz(_ah) * 1000)
#define CLOCK_RATE(_ah) (ath_hal_mac_clks(ah, 1000))
/*
* Return an approximation of the time spent ``listening'' by
* deducting the cycles spent tx'ing and rx'ing from the total
* cycle count since our last call. A return value <0 indicates
* an invalid/inconsistent time.
*/
static int32_t
ar9300_ani_get_listen_time(struct ath_hal *ah, HAL_ANISTATS *ani_stats)
{
struct ath_hal_9300 *ahp = AH9300(ah);
struct ar9300_ani_state *ani_state;
u_int32_t tx_frame_count, rx_frame_count, cycle_count;
u_int32_t rx_busy_count, rx_ext_busy_count;
int32_t listen_time;
tx_frame_count = OS_REG_READ(ah, AR_TFCNT);
rx_frame_count = OS_REG_READ(ah, AR_RFCNT);
rx_busy_count = OS_REG_READ(ah, AR_RCCNT);
rx_ext_busy_count = OS_REG_READ(ah, AR_EXTRCCNT);
cycle_count = OS_REG_READ(ah, AR_CCCNT);
ani_state = ahp->ah_curani;
if (ani_state->cycle_count == 0 || ani_state->cycle_count > cycle_count) {
/*
* Cycle counter wrap (or initial call); it's not possible
* to accurately calculate a value because the registers
* right shift rather than wrap--so punt and return 0.
*/
listen_time = 0;
ahp->ah_stats.ast_ani_lzero++;
#if HAL_ANI_DEBUG
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: 1st call: ani_state->cycle_count=%d\n",
__func__, ani_state->cycle_count);
#endif
} else {
int32_t ccdelta = cycle_count - ani_state->cycle_count;
int32_t rfdelta = rx_frame_count - ani_state->rx_frame_count;
int32_t tfdelta = tx_frame_count - ani_state->tx_frame_count;
int32_t rcdelta = rx_busy_count - ani_state->rx_busy_count;
int32_t extrcdelta = rx_ext_busy_count - ani_state->rx_ext_busy_count;
listen_time = (ccdelta - rfdelta - tfdelta) / CLOCK_RATE(ah);
//#if HAL_ANI_DEBUG
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: cyclecount=%d, rfcount=%d, tfcount=%d, rcdelta=%d, extrcdelta=%d, listen_time=%d "
"CLOCK_RATE=%d\n",
__func__, ccdelta, rfdelta, tfdelta, rcdelta, extrcdelta,
listen_time, CLOCK_RATE(ah));
//#endif
/* Populate as appropriate */
ani_stats->cyclecnt_diff = ccdelta;
ani_stats->rxclr_cnt = rcdelta;
ani_stats->txframecnt_diff = tfdelta;
ani_stats->rxframecnt_diff = rfdelta;
ani_stats->extrxclr_cnt = extrcdelta;
ani_stats->listen_time = listen_time;
ani_stats->valid = AH_TRUE;
}
ani_state->cycle_count = cycle_count;
ani_state->tx_frame_count = tx_frame_count;
ani_state->rx_frame_count = rx_frame_count;
ani_state->rx_busy_count = rx_busy_count;
ani_state->rx_ext_busy_count = rx_ext_busy_count;
return listen_time;
}
/*
* Do periodic processing. This routine is called from a timer
*/
void
ar9300_ani_ar_poll(struct ath_hal *ah, const HAL_NODE_STATS *stats,
const struct ieee80211_channel *chan, HAL_ANISTATS *ani_stats)
{
struct ath_hal_9300 *ahp = AH9300(ah);
struct ar9300_ani_state *ani_state;
int32_t listen_time;
u_int32_t ofdm_phy_err_rate, cck_phy_err_rate;
u_int32_t ofdm_phy_err_cnt, cck_phy_err_cnt;
HAL_BOOL old_phy_noise_spur;
ani_state = ahp->ah_curani;
ahp->ah_stats.ast_nodestats = *stats; /* XXX optimize? */
if (ani_state == NULL) {
/* should not happen */
HALDEBUG(ah, HAL_DEBUG_UNMASKABLE,
"%s: can't poll - no ANI not initialized for this channel\n",
__func__);
return;
}
/*
* ar9300_ani_ar_poll is never called while scanning but we may have been
* scanning and now just restarted polling. In this case we need to
* restore historical values.
*/
if (ani_state->must_restore) {
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: must restore - calling ar9300_ani_restart\n", __func__);
ar9300_ani_reset(ah, AH_FALSE);
return;
}
listen_time = ar9300_ani_get_listen_time(ah, ani_stats);
if (listen_time <= 0) {
ahp->ah_stats.ast_ani_lneg++;
/* restart ANI period if listen_time is invalid */
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: listen_time=%d - calling ar9300_ani_restart\n",
__func__, listen_time);
ar9300_ani_restart(ah);
return;
}
/* XXX beware of overflow? */
ani_state->listen_time += listen_time;
/* Clear the mib counters and save them in the stats */
ar9300_update_mib_mac_stats(ah);
/* NB: these are not reset-on-read */
ofdm_phy_err_cnt = OS_REG_READ(ah, AR_PHY_ERR_1);
cck_phy_err_cnt = OS_REG_READ(ah, AR_PHY_ERR_2);
/* Populate HAL_ANISTATS */
if (ani_stats) {
ani_stats->cckphyerr_cnt =
cck_phy_err_cnt - ani_state->cck_phy_err_count;
ani_stats->ofdmphyerrcnt_diff =
ofdm_phy_err_cnt - ani_state->ofdm_phy_err_count;
}
/* NB: only use ast_ani_*errs with AH_PRIVATE_DIAG */
ahp->ah_stats.ast_ani_ofdmerrs +=
ofdm_phy_err_cnt - ani_state->ofdm_phy_err_count;
ani_state->ofdm_phy_err_count = ofdm_phy_err_cnt;
ahp->ah_stats.ast_ani_cckerrs +=
cck_phy_err_cnt - ani_state->cck_phy_err_count;
ani_state->cck_phy_err_count = cck_phy_err_cnt;
#if HAL_ANI_DEBUG
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: Errors: OFDM=0x%08x-0x0=%d CCK=0x%08x-0x0=%d\n",
__func__, ofdm_phy_err_cnt, ofdm_phy_err_cnt,
cck_phy_err_cnt, cck_phy_err_cnt);
#endif
/*
* If ani is not enabled, return after we've collected
* statistics
*/
if (!DO_ANI(ah)) {
return;
}
ofdm_phy_err_rate =
ani_state->ofdm_phy_err_count * 1000 / ani_state->listen_time;
cck_phy_err_rate =
ani_state->cck_phy_err_count * 1000 / ani_state->listen_time;
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: listen_time=%d OFDM:%d errs=%d/s CCK:%d errs=%d/s ofdm_turn=%d\n",
__func__, listen_time,
ani_state->ofdm_noise_immunity_level, ofdm_phy_err_rate,
ani_state->cck_noise_immunity_level, cck_phy_err_rate,
ani_state->ofdms_turn);
if (ani_state->listen_time >= HAL_NOISE_DETECT_PERIOD) {
old_phy_noise_spur = ani_state->phy_noise_spur;
if (ofdm_phy_err_rate <= ani_state->ofdm_trig_low &&
cck_phy_err_rate <= ani_state->cck_trig_low) {
if (ani_state->listen_time >= HAL_NOISE_RECOVER_PERIOD) {
ani_state->phy_noise_spur = 0;
}
} else {
ani_state->phy_noise_spur = 1;
}
if (old_phy_noise_spur != ani_state->phy_noise_spur) {
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: enviroment change from %d to %d\n",
__func__, old_phy_noise_spur, ani_state->phy_noise_spur);
}
}
if (ani_state->listen_time > 5 * ahp->ah_ani_period) {
/*
* Check to see if need to lower immunity if
* 5 ani_periods have passed
*/
if (ofdm_phy_err_rate <= ani_state->ofdm_trig_low &&
cck_phy_err_rate <= ani_state->cck_trig_low)
{
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: 1. listen_time=%d OFDM:%d errs=%d/s(<%d) "
"CCK:%d errs=%d/s(<%d) -> ar9300_ani_lower_immunity\n",
__func__, ani_state->listen_time,
ani_state->ofdm_noise_immunity_level, ofdm_phy_err_rate,
ani_state->ofdm_trig_low, ani_state->cck_noise_immunity_level,
cck_phy_err_rate, ani_state->cck_trig_low);
ar9300_ani_lower_immunity(ah);
ani_state->ofdms_turn = !ani_state->ofdms_turn;
}
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: 1 listen_time=%d ofdm=%d/s cck=%d/s - "
"calling ar9300_ani_restart\n",
__func__, ani_state->listen_time,
ofdm_phy_err_rate, cck_phy_err_rate);
ar9300_ani_restart(ah);
} else if (ani_state->listen_time > ahp->ah_ani_period) {
/* check to see if need to raise immunity */
if (ofdm_phy_err_rate > ani_state->ofdm_trig_high &&
(cck_phy_err_rate <= ani_state->cck_trig_high ||
ani_state->ofdms_turn))
{
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: 2 listen_time=%d OFDM:%d errs=%d/s(>%d) -> "
"ar9300_ani_ofdm_err_trigger\n",
__func__, ani_state->listen_time,
ani_state->ofdm_noise_immunity_level, ofdm_phy_err_rate,
ani_state->ofdm_trig_high);
ar9300_ani_ofdm_err_trigger(ah);
ar9300_ani_restart(ah);
ani_state->ofdms_turn = AH_FALSE;
} else if (cck_phy_err_rate > ani_state->cck_trig_high) {
HALDEBUG(ah, HAL_DEBUG_ANI,
"%s: 3 listen_time=%d CCK:%d errs=%d/s(>%d) -> "
"ar9300_ani_cck_err_trigger\n",
__func__, ani_state->listen_time,
ani_state->cck_noise_immunity_level, cck_phy_err_rate,
ani_state->cck_trig_high);
ar9300_ani_cck_err_trigger(ah);
ar9300_ani_restart(ah);
ani_state->ofdms_turn = AH_TRUE;
}
}
}
/*
* The poll function above calculates short noise spurs, caused by non-80211
* devices, based on OFDM/CCK Phy errs.
* If the noise is short enough, we don't want our ratectrl Algo to stop probing
* higher rates, due to bad PER.
*/
HAL_BOOL
ar9300_is_ani_noise_spur(struct ath_hal *ah)
{
struct ath_hal_9300 *ahp = AH9300(ah);
struct ar9300_ani_state *ani_state;
ani_state = ahp->ah_curani;
return ani_state->phy_noise_spur;
}