freebsd-dev/sys/dev/acpica/acpi_cmbat.c
Nate Lawson 54640fac34 Only report a critical battery level once until it's gone non-critical.
An improvement would be to check all batteries for critical state before
printing a message.

Reported by:	Kevin Oberman (oberman at es net)
2004-12-20 05:03:41 +00:00

657 lines
17 KiB
C

/*-
* Copyright (c) 2000 Munehiro Matsuda
* Copyright (c) 2000 Takanori Watanabe
* Copyright (c) 2000 Mitsuru IWASAKI <iwasaki@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include "opt_acpi.h"
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/ioccom.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <sys/malloc.h>
#include "acpi.h"
#include <dev/acpica/acpivar.h>
#include <dev/acpica/acpiio.h>
MALLOC_DEFINE(M_ACPICMBAT, "acpicmbat", "ACPI control method battery data");
/* Number of times to retry initialization before giving up. */
#define ACPI_CMBAT_RETRY_MAX 6
/* Check the battery once a minute. */
#define CMBAT_POLLRATE (60 * hz)
/* Hooks for the ACPI CA debugging infrastructure */
#define _COMPONENT ACPI_BATTERY
ACPI_MODULE_NAME("BATTERY")
#define ACPI_BATTERY_BST_CHANGE 0x80
#define ACPI_BATTERY_BIF_CHANGE 0x81
struct acpi_cmbat_softc {
device_t dev;
struct acpi_bif bif;
struct acpi_bst bst;
struct timespec bif_lastupdated;
struct timespec bst_lastupdated;
int flags;
int present;
int cap;
int min;
int full_charge_time;
int initializing;
int phys_unit;
};
static struct timespec acpi_cmbat_info_lastupdated;
ACPI_SERIAL_DECL(cmbat, "ACPI cmbat");
/* XXX: devclass_get_maxunit() don't give us the current allocated units. */
static int acpi_cmbat_units = 0;
static int acpi_cmbat_info_expired(struct timespec *);
static void acpi_cmbat_info_updated(struct timespec *);
static void acpi_cmbat_get_bst(void *);
static void acpi_cmbat_get_bif(void *);
static void acpi_cmbat_notify_handler(ACPI_HANDLE, UINT32, void *);
static int acpi_cmbat_probe(device_t);
static int acpi_cmbat_attach(device_t);
static int acpi_cmbat_detach(device_t);
static int acpi_cmbat_resume(device_t);
static int acpi_cmbat_ioctl(u_long, caddr_t, void *);
static int acpi_cmbat_is_bst_valid(struct acpi_bst*);
static int acpi_cmbat_is_bif_valid(struct acpi_bif*);
static int acpi_cmbat_get_total_battinfo(struct acpi_battinfo *);
static void acpi_cmbat_init_battery(void *);
static device_method_t acpi_cmbat_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, acpi_cmbat_probe),
DEVMETHOD(device_attach, acpi_cmbat_attach),
DEVMETHOD(device_detach, acpi_cmbat_detach),
DEVMETHOD(device_resume, acpi_cmbat_resume),
{0, 0}
};
static driver_t acpi_cmbat_driver = {
"acpi_cmbat",
acpi_cmbat_methods,
sizeof(struct acpi_cmbat_softc),
};
static devclass_t acpi_cmbat_devclass;
DRIVER_MODULE(acpi_cmbat, acpi, acpi_cmbat_driver, acpi_cmbat_devclass, 0, 0);
MODULE_DEPEND(acpi_cmbat, acpi, 1, 1, 1);
static int
acpi_cmbat_info_expired(struct timespec *lastupdated)
{
struct timespec curtime;
ACPI_SERIAL_ASSERT(cmbat);
if (lastupdated == NULL)
return (TRUE);
if (!timespecisset(lastupdated))
return (TRUE);
getnanotime(&curtime);
timespecsub(&curtime, lastupdated);
return (curtime.tv_sec < 0 ||
curtime.tv_sec > acpi_battery_get_info_expire());
}
static void
acpi_cmbat_info_updated(struct timespec *lastupdated)
{
ACPI_SERIAL_ASSERT(cmbat);
if (lastupdated != NULL)
getnanotime(lastupdated);
}
static void
acpi_cmbat_get_bst(void *context)
{
device_t dev;
struct acpi_cmbat_softc *sc;
ACPI_STATUS as;
ACPI_OBJECT *res;
ACPI_HANDLE h;
ACPI_BUFFER bst_buffer;
ACPI_SERIAL_ASSERT(cmbat);
dev = context;
sc = device_get_softc(dev);
h = acpi_get_handle(dev);
bst_buffer.Pointer = NULL;
bst_buffer.Length = ACPI_ALLOCATE_BUFFER;
if (!acpi_cmbat_info_expired(&sc->bst_lastupdated))
goto end;
as = AcpiEvaluateObject(h, "_BST", NULL, &bst_buffer);
if (ACPI_FAILURE(as)) {
ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
"error fetching current battery status -- %s\n",
AcpiFormatException(as));
goto end;
}
res = (ACPI_OBJECT *)bst_buffer.Pointer;
if (!ACPI_PKG_VALID(res, 4)) {
ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
"battery status corrupted\n");
goto end;
}
if (acpi_PkgInt32(res, 0, &sc->bst.state) != 0)
goto end;
if (acpi_PkgInt32(res, 1, &sc->bst.rate) != 0)
goto end;
if (acpi_PkgInt32(res, 2, &sc->bst.cap) != 0)
goto end;
if (acpi_PkgInt32(res, 3, &sc->bst.volt) != 0)
goto end;
acpi_cmbat_info_updated(&sc->bst_lastupdated);
/* XXX If all batteries are critical, perhaps we should suspend. */
if (sc->bst.state & ACPI_BATT_STAT_CRITICAL) {
if ((sc->flags & ACPI_BATT_STAT_CRITICAL) == 0) {
sc->flags |= ACPI_BATT_STAT_CRITICAL;
device_printf(dev, "critically low charge!\n");
}
} else
sc->flags &= ~ACPI_BATT_STAT_CRITICAL;
end:
if (bst_buffer.Pointer != NULL)
AcpiOsFree(bst_buffer.Pointer);
}
static void
acpi_cmbat_get_bif(void *context)
{
device_t dev;
struct acpi_cmbat_softc *sc;
ACPI_STATUS as;
ACPI_OBJECT *res;
ACPI_HANDLE h;
ACPI_BUFFER bif_buffer;
ACPI_SERIAL_ASSERT(cmbat);
dev = context;
sc = device_get_softc(dev);
h = acpi_get_handle(dev);
bif_buffer.Pointer = NULL;
bif_buffer.Length = ACPI_ALLOCATE_BUFFER;
if (!acpi_cmbat_info_expired(&sc->bif_lastupdated))
goto end;
as = AcpiEvaluateObject(h, "_BIF", NULL, &bif_buffer);
if (ACPI_FAILURE(as)) {
ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
"error fetching current battery info -- %s\n",
AcpiFormatException(as));
goto end;
}
res = (ACPI_OBJECT *)bif_buffer.Pointer;
if (!ACPI_PKG_VALID(res, 13)) {
ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
"battery info corrupted\n");
goto end;
}
if (acpi_PkgInt32(res, 0, &sc->bif.units) != 0)
goto end;
if (acpi_PkgInt32(res, 1, &sc->bif.dcap) != 0)
goto end;
if (acpi_PkgInt32(res, 2, &sc->bif.lfcap) != 0)
goto end;
if (acpi_PkgInt32(res, 3, &sc->bif.btech) != 0)
goto end;
if (acpi_PkgInt32(res, 4, &sc->bif.dvol) != 0)
goto end;
if (acpi_PkgInt32(res, 5, &sc->bif.wcap) != 0)
goto end;
if (acpi_PkgInt32(res, 6, &sc->bif.lcap) != 0)
goto end;
if (acpi_PkgInt32(res, 7, &sc->bif.gra1) != 0)
goto end;
if (acpi_PkgInt32(res, 8, &sc->bif.gra2) != 0)
goto end;
if (acpi_PkgStr(res, 9, sc->bif.model, ACPI_CMBAT_MAXSTRLEN) != 0)
goto end;
if (acpi_PkgStr(res, 10, sc->bif.serial, ACPI_CMBAT_MAXSTRLEN) != 0)
goto end;
if (acpi_PkgStr(res, 11, sc->bif.type, ACPI_CMBAT_MAXSTRLEN) != 0)
goto end;
if (acpi_PkgStr(res, 12, sc->bif.oeminfo, ACPI_CMBAT_MAXSTRLEN) != 0)
goto end;
acpi_cmbat_info_updated(&sc->bif_lastupdated);
end:
if (bif_buffer.Pointer != NULL)
AcpiOsFree(bif_buffer.Pointer);
}
static void
acpi_cmbat_notify_handler(ACPI_HANDLE h, UINT32 notify, void *context)
{
device_t dev;
struct acpi_cmbat_softc *sc;
dev = (device_t)context;
sc = device_get_softc(dev);
acpi_UserNotify("CMBAT", h, notify);
/*
* Clear the appropriate last updated time. The next call to retrieve
* the battery status will get the new value for us. We don't need to
* acquire a lock since we are only clearing the time stamp and since
* calling _BST/_BIF can trigger a notify, we could deadlock also.
*/
switch (notify) {
case ACPI_NOTIFY_DEVICE_CHECK:
case ACPI_BATTERY_BST_CHANGE:
timespecclear(&sc->bst_lastupdated);
break;
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_BATTERY_BIF_CHANGE:
timespecclear(&sc->bif_lastupdated);
break;
default:
break;
}
}
static int
acpi_cmbat_probe(device_t dev)
{
static char *cmbat_ids[] = { "PNP0C0A", NULL };
if (acpi_disabled("cmbat") ||
ACPI_ID_PROBE(device_get_parent(dev), dev, cmbat_ids) == NULL)
return (ENXIO);
device_set_desc(dev, "Control Method Battery");
return (0);
}
static int
acpi_cmbat_attach(device_t dev)
{
int error;
ACPI_HANDLE handle;
struct acpi_cmbat_softc *sc;
sc = device_get_softc(dev);
handle = acpi_get_handle(dev);
sc->dev = dev;
/*
* Install a system notify handler in addition to the device notify.
* Toshiba notebook uses this alternate notify for its battery.
*/
AcpiInstallNotifyHandler(handle, ACPI_ALL_NOTIFY,
acpi_cmbat_notify_handler, dev);
ACPI_SERIAL_BEGIN(cmbat);
timespecclear(&sc->bif_lastupdated);
timespecclear(&sc->bst_lastupdated);
if (acpi_cmbat_units == 0) {
error = acpi_register_ioctl(ACPIIO_CMBAT_GET_BIF,
acpi_cmbat_ioctl, NULL);
if (error != 0) {
device_printf(dev, "register bif ioctl failed\n");
return (error);
}
error = acpi_register_ioctl(ACPIIO_CMBAT_GET_BST,
acpi_cmbat_ioctl, NULL);
if (error != 0) {
device_printf(dev, "register bst ioctl failed\n");
return (error);
}
}
sc->phys_unit = acpi_cmbat_units;
error = acpi_battery_register(ACPI_BATT_TYPE_CMBAT, sc->phys_unit);
if (error != 0) {
device_printf(dev, "registering battery %d failed\n", sc->phys_unit);
return (error);
}
acpi_cmbat_units++;
timespecclear(&acpi_cmbat_info_lastupdated);
ACPI_SERIAL_END(cmbat);
AcpiOsQueueForExecution(OSD_PRIORITY_LO, acpi_cmbat_init_battery, dev);
return (0);
}
static int
acpi_cmbat_detach(device_t dev)
{
struct acpi_cmbat_softc *sc;
sc = device_get_softc(dev);
ACPI_SERIAL_BEGIN(cmbat);
acpi_battery_remove(ACPI_BATT_TYPE_CMBAT, sc->phys_unit);
acpi_cmbat_units--;
ACPI_SERIAL_END(cmbat);
return (0);
}
static int
acpi_cmbat_resume(device_t dev)
{
AcpiOsQueueForExecution(OSD_PRIORITY_LO, acpi_cmbat_init_battery, dev);
return (0);
}
static int
acpi_cmbat_ioctl(u_long cmd, caddr_t addr, void *arg)
{
device_t dev;
union acpi_battery_ioctl_arg *ioctl_arg;
struct acpi_cmbat_softc *sc;
struct acpi_bif *bifp;
struct acpi_bst *bstp;
ioctl_arg = (union acpi_battery_ioctl_arg *)addr;
dev = devclass_get_device(acpi_cmbat_devclass, ioctl_arg->unit);
if (dev == NULL)
return (ENXIO);
sc = device_get_softc(dev);
/*
* No security check required: information retrieval only. If
* new functions are added here, a check might be required.
*/
ACPI_SERIAL_BEGIN(cmbat);
switch (cmd) {
case ACPIIO_CMBAT_GET_BIF:
acpi_cmbat_get_bif(dev);
bifp = &ioctl_arg->bif;
bifp->units = sc->bif.units;
bifp->dcap = sc->bif.dcap;
bifp->lfcap = sc->bif.lfcap;
bifp->btech = sc->bif.btech;
bifp->dvol = sc->bif.dvol;
bifp->wcap = sc->bif.wcap;
bifp->lcap = sc->bif.lcap;
bifp->gra1 = sc->bif.gra1;
bifp->gra2 = sc->bif.gra2;
strncpy(bifp->model, sc->bif.model, sizeof(sc->bif.model));
strncpy(bifp->serial, sc->bif.serial, sizeof(sc->bif.serial));
strncpy(bifp->type, sc->bif.type, sizeof(sc->bif.type));
strncpy(bifp->oeminfo, sc->bif.oeminfo, sizeof(sc->bif.oeminfo));
break;
case ACPIIO_CMBAT_GET_BST:
bstp = &ioctl_arg->bst;
if (acpi_BatteryIsPresent(dev)) {
acpi_cmbat_get_bst(dev);
bstp->state = sc->bst.state;
bstp->rate = sc->bst.rate;
bstp->cap = sc->bst.cap;
bstp->volt = sc->bst.volt;
} else {
bstp->state = ACPI_BATT_STAT_NOT_PRESENT;
}
break;
default:
break;
}
ACPI_SERIAL_END(cmbat);
return (0);
}
static int
acpi_cmbat_is_bst_valid(struct acpi_bst *bst)
{
if (bst->state >= ACPI_BATT_STAT_MAX || bst->cap == 0xffffffff ||
bst->volt == 0xffffffff)
return (FALSE);
else
return (TRUE);
}
static int
acpi_cmbat_is_bif_valid(struct acpi_bif *bif)
{
if (bif->lfcap == 0)
return (FALSE);
else
return (TRUE);
}
static int
acpi_cmbat_get_total_battinfo(struct acpi_battinfo *battinfo)
{
int i;
int error;
int batt_stat;
int valid_rate, valid_units;
int cap, min;
int total_cap, total_min, total_full;
struct acpi_cmbat_softc *sc;
ACPI_SERIAL_ASSERT(cmbat);
cap = min = -1;
batt_stat = ACPI_BATT_STAT_NOT_PRESENT;
error = 0;
/* Get battery status, valid rate and valid units */
batt_stat = valid_rate = valid_units = 0;
for (i = 0; i < acpi_cmbat_units; i++) {
sc = devclass_get_softc(acpi_cmbat_devclass, i);
if (sc == NULL)
continue;
sc->present = acpi_BatteryIsPresent(sc->dev);
if (!sc->present)
continue;
acpi_cmbat_get_bst(sc->dev);
/* If battery not installed, we get strange values */
if (!acpi_cmbat_is_bst_valid(&sc->bst) ||
!acpi_cmbat_is_bif_valid(&sc->bif)) {
sc->present = FALSE;
continue;
}
valid_units++;
sc->cap = 100 * sc->bst.cap / sc->bif.lfcap;
/*
* Some laptops report the "design-capacity" instead of the
* "real-capacity" when the battery is fully charged.
* That breaks the above arithmetic as it needs to be 100% maximum.
*/
if (sc->cap > 100)
sc->cap = 100;
batt_stat |= sc->bst.state;
/*
* XXX Hack to calculate total battery time.
*
* On systems with more than one battery, they may get used
* sequentially, thus bst.rate may only signify the one in use.
* For the remaining batteries, bst.rate will be zero, which
* makes it impossible to calculate the remaining time. Some
* other systems may need the sum of all the bst.rate values
* when discharging. Therefore, we sum the bst.rate for valid
* batteries (ones in the discharging state) and use the sum
* to calculate the total remaining time.
*/
if (sc->bst.rate > 0) {
if (sc->bst.state & ACPI_BATT_STAT_DISCHARG)
valid_rate += sc->bst.rate;
}
}
/* Calculate total battery capacity and time */
total_cap = total_min = total_full = 0;
for (i = 0; i < acpi_cmbat_units; i++) {
sc = devclass_get_softc(acpi_cmbat_devclass, i);
if (!sc->present)
continue;
/*
* If any batteries are discharging, use the sum of the bst.rate
* values. Otherwise, use the full charge time to estimate
* remaining time. If neither are available, assume no charge.
*/
if (valid_rate > 0)
sc->min = 60 * sc->bst.cap / valid_rate;
else if (sc->full_charge_time > 0)
sc->min = (sc->full_charge_time * sc->cap) / 100;
else
sc->min = 0;
total_min += sc->min;
total_cap += sc->cap;
total_full += sc->full_charge_time;
}
/* Battery life */
if (valid_units == 0) {
cap = -1;
batt_stat = ACPI_BATT_STAT_NOT_PRESENT;
} else
cap = total_cap / valid_units;
/* Battery time */
if (valid_units == 0)
min = -1;
else if (valid_rate == 0 || (batt_stat & ACPI_BATT_STAT_CHARGING)) {
if (total_full == 0)
min = -1;
else
min = (total_full * cap) / 100;
} else
min = total_min;
acpi_cmbat_info_updated(&acpi_cmbat_info_lastupdated);
battinfo->cap = cap;
battinfo->min = min;
battinfo->state = batt_stat;
return (error);
}
static void
acpi_cmbat_init_battery(void *arg)
{
struct acpi_cmbat_softc *sc;
int retry;
device_t dev;
dev = (device_t)arg;
sc = device_get_softc(dev);
ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
"battery initialization start\n");
for (retry = 0; retry < ACPI_CMBAT_RETRY_MAX; retry++, AcpiOsSleep(10000)) {
sc->present = acpi_BatteryIsPresent(dev);
if (!sc->present)
continue;
ACPI_SERIAL_BEGIN(cmbat);
timespecclear(&sc->bst_lastupdated);
timespecclear(&sc->bif_lastupdated);
acpi_cmbat_get_bst(dev);
acpi_cmbat_get_bif(dev);
ACPI_SERIAL_END(cmbat);
if (acpi_cmbat_is_bst_valid(&sc->bst) &&
acpi_cmbat_is_bif_valid(&sc->bif))
break;
}
if (retry == ACPI_CMBAT_RETRY_MAX) {
ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
"battery initialization failed, giving up\n");
} else {
ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
"battery initialization done, tried %d times\n", retry + 1);
}
}
/*
* Public interfaces.
*/
int
acpi_cmbat_get_battinfo(int unit, struct acpi_battinfo *battinfo)
{
int error;
struct acpi_cmbat_softc *sc;
ACPI_SERIAL_BEGIN(cmbat);
error = acpi_cmbat_get_total_battinfo(battinfo);
if (unit == -1 || error)
goto out;
error = ENXIO;
if (unit >= acpi_cmbat_units)
goto out;
if ((sc = devclass_get_softc(acpi_cmbat_devclass, unit)) == NULL)
goto out;
if (!sc->present) {
battinfo->cap = -1;
battinfo->min = -1;
battinfo->state = ACPI_BATT_STAT_NOT_PRESENT;
} else {
battinfo->cap = sc->cap;
battinfo->min = sc->min;
battinfo->state = sc->bst.state;
}
error = 0;
out:
ACPI_SERIAL_END(cmbat);
return (error);
}