d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ae0b1ccbab
freebsd-dev/sys/dev/mps/mpi/mpi2.h
Stephen McConnell ef065d89e9 - Updated all files with 2015 Avago copyright, and updated LSI's copyright 
dates.

- Changed all of the PCI device strings from LSI to Avago Technologies (LSI).

- Added a sysctl variable to control how StartStopUnit behavior works. User can
  select to spin down disks based on if disk is SSD or HDD.

- Inquiry data is required to tell if a disk will support SSU at shutdown or
  not. Due to the addition of mpssas_async, which gets Advanced Info but not
  Inquiry data, the setting of supports_SSU was moved to the
  mpssas_scsiio_complete function, which snoops for any Inquiry commands. And,
  since disks are shutdown as a target and not a LUN, this process was
  simplified by basing it on targets and not LUNs.

- Added a sysctl variable that sets the amount of time to retry after sending a
  failed SATA ID command. This helps with some bad disks and large disks that
  require a lot of time to spin up. Part of this change was to add a callout to
  handle timeouts with the SATA ID command. The callout function is called
  mpssas_ata_id_timeout(). (Fixes PR 191348)

- Changed the way resets work by allowing I/O to continue to devices that are
  not currently under a reset condition. This uses devq's instead of simq's and
  makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function
  called mpssas_prepare_tm().

- Some changes were made to reduce code duplication when getting a SAS address
  for a SATA disk.

- Fixed some formatting and whitespace.

- Bump version of mps driver to 20.00.00.00-fbsd

PR:		191348
Reviewed by:	ken, scottl
Approved by:	ken, scottl
MFC after:	2 weeks
2015-02-24 22:07:42 +00:00

1166 lines
48 KiB
C
Raw Blame History

/*-
* Copyright (c) 2006-2015 LSI Corp.
* Copyright (c) 2013-2015 Avago Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
*
* $FreeBSD$
*/
/*
* Copyright (c) 2006-2015 LSI Corporation.
* Copyright (c) 2013-2015 Avago Technologies
*
*
* Name: mpi2.h
* Title: MPI Message independent structures and definitions
* including System Interface Register Set and
* scatter/gather formats.
* Creation Date: June 21, 2006
*
* mpi2.h Version: 02.00.18
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT.
* 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT.
* 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT.
* Moved ReplyPostHostIndex register to offset 0x6C of the
* MPI2_SYSTEM_INTERFACE_REGS and modified the define for
* MPI2_REPLY_POST_HOST_INDEX_OFFSET.
* Added union of request descriptors.
* Added union of reply descriptors.
* 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT.
* Added define for MPI2_VERSION_02_00.
* Fixed the size of the FunctionDependent5 field in the
* MPI2_DEFAULT_REPLY structure.
* 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT.
* Removed the MPI-defined Fault Codes and extended the
* product specific codes up to 0xEFFF.
* Added a sixth key value for the WriteSequence register
* and changed the flush value to 0x0.
* Added message function codes for Diagnostic Buffer Post
* and Diagnsotic Release.
* New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
* Moved MPI2_VERSION_UNION from mpi2_ioc.h.
* 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT.
* 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT.
* 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT.
* Added #defines for marking a reply descriptor as unused.
* 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT.
* 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT.
* Moved LUN field defines from mpi2_init.h.
* 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT.
* 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT.
* In all request and reply descriptors, replaced VF_ID
* field with MSIxIndex field.
* Removed DevHandle field from
* MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
* bytes reserved.
* Added RAID Accelerator functionality.
* 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT.
* 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT.
* Added MSI-x index mask and shift for Reply Post Host
* Index register.
* Added function code for Host Based Discovery Action.
* 02-10-10 02.00.15 Bumped MPI2_HEADER_VERSION_UNIT.
* Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
* Added defines for product-specific range of message
* function codes, 0xF0 to 0xFF.
* 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT.
* Added alternative defines for the SGE Direction bit.
* 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT.
* 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT.
* Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
* --------------------------------------------------------------------------
*/
#ifndef MPI2_H
#define MPI2_H
/*****************************************************************************
*
* MPI Version Definitions
*
*****************************************************************************/
#define MPI2_VERSION_MAJOR (0x02)
#define MPI2_VERSION_MINOR (0x00)
#define MPI2_VERSION_MAJOR_MASK (0xFF00)
#define MPI2_VERSION_MAJOR_SHIFT (8)
#define MPI2_VERSION_MINOR_MASK (0x00FF)
#define MPI2_VERSION_MINOR_SHIFT (0)
#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
MPI2_VERSION_MINOR)
#define MPI2_VERSION_02_00 (0x0200)
/* versioning for this MPI header set */
#define MPI2_HEADER_VERSION_UNIT (0x12)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF)
#define MPI2_HEADER_VERSION_DEV_SHIFT (0)
#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | MPI2_HEADER_VERSION_DEV)
/*****************************************************************************
*
* IOC State Definitions
*
*****************************************************************************/
#define MPI2_IOC_STATE_RESET (0x00000000)
#define MPI2_IOC_STATE_READY (0x10000000)
#define MPI2_IOC_STATE_OPERATIONAL (0x20000000)
#define MPI2_IOC_STATE_FAULT (0x40000000)
#define MPI2_IOC_STATE_MASK (0xF0000000)
#define MPI2_IOC_STATE_SHIFT (28)
/* Fault state range for prodcut specific codes */
#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN (0x0000)
#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX (0xEFFF)
/*****************************************************************************
*
* System Interface Register Definitions
*
*****************************************************************************/
typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS
{
U32 Doorbell; /* 0x00 */
U32 WriteSequence; /* 0x04 */
U32 HostDiagnostic; /* 0x08 */
U32 Reserved1; /* 0x0C */
U32 DiagRWData; /* 0x10 */
U32 DiagRWAddressLow; /* 0x14 */
U32 DiagRWAddressHigh; /* 0x18 */
U32 Reserved2[5]; /* 0x1C */
U32 HostInterruptStatus; /* 0x30 */
U32 HostInterruptMask; /* 0x34 */
U32 DCRData; /* 0x38 */
U32 DCRAddress; /* 0x3C */
U32 Reserved3[2]; /* 0x40 */
U32 ReplyFreeHostIndex; /* 0x48 */
U32 Reserved4[8]; /* 0x4C */
U32 ReplyPostHostIndex; /* 0x6C */
U32 Reserved5; /* 0x70 */
U32 HCBSize; /* 0x74 */
U32 HCBAddressLow; /* 0x78 */
U32 HCBAddressHigh; /* 0x7C */
U32 Reserved6[16]; /* 0x80 */
U32 RequestDescriptorPostLow; /* 0xC0 */
U32 RequestDescriptorPostHigh; /* 0xC4 */
U32 Reserved7[14]; /* 0xC8 */
} MPI2_SYSTEM_INTERFACE_REGS, MPI2_POINTER PTR_MPI2_SYSTEM_INTERFACE_REGS,
Mpi2SystemInterfaceRegs_t, MPI2_POINTER pMpi2SystemInterfaceRegs_t;
/*
* Defines for working with the Doorbell register.
*/
#define MPI2_DOORBELL_OFFSET (0x00000000)
/* IOC --> System values */
#define MPI2_DOORBELL_USED (0x08000000)
#define MPI2_DOORBELL_WHO_INIT_MASK (0x07000000)
#define MPI2_DOORBELL_WHO_INIT_SHIFT (24)
#define MPI2_DOORBELL_FAULT_CODE_MASK (0x0000FFFF)
#define MPI2_DOORBELL_DATA_MASK (0x0000FFFF)
/* System --> IOC values */
#define MPI2_DOORBELL_FUNCTION_MASK (0xFF000000)
#define MPI2_DOORBELL_FUNCTION_SHIFT (24)
#define MPI2_DOORBELL_ADD_DWORDS_MASK (0x00FF0000)
#define MPI2_DOORBELL_ADD_DWORDS_SHIFT (16)
/*
* Defines for the WriteSequence register
*/
#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004)
#define MPI2_WRSEQ_KEY_VALUE_MASK (0x0000000F)
#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0)
#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF)
#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4)
#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB)
#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2)
#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7)
#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD)
/*
* Defines for the HostDiagnostic register
*/
#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008)
#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800)
#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000)
#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800)
#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400)
#define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200)
#define MPI2_DIAG_HCB_MODE (0x00000100)
#define MPI2_DIAG_DIAG_WRITE_ENABLE (0x00000080)
#define MPI2_DIAG_FLASH_BAD_SIG (0x00000040)
#define MPI2_DIAG_RESET_HISTORY (0x00000020)
#define MPI2_DIAG_DIAG_RW_ENABLE (0x00000010)
#define MPI2_DIAG_RESET_ADAPTER (0x00000004)
#define MPI2_DIAG_HOLD_IOC_RESET (0x00000002)
/*
* Offsets for DiagRWData and address
*/
#define MPI2_DIAG_RW_DATA_OFFSET (0x00000010)
#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET (0x00000014)
#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00000018)
/*
* Defines for the HostInterruptStatus register
*/
#define MPI2_HOST_INTERRUPT_STATUS_OFFSET (0x00000030)
#define MPI2_HIS_SYS2IOC_DB_STATUS (0x80000000)
#define MPI2_HIS_IOP_DOORBELL_STATUS MPI2_HIS_SYS2IOC_DB_STATUS
#define MPI2_HIS_RESET_IRQ_STATUS (0x40000000)
#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT (0x00000008)
#define MPI2_HIS_IOC2SYS_DB_STATUS (0x00000001)
#define MPI2_HIS_DOORBELL_INTERRUPT MPI2_HIS_IOC2SYS_DB_STATUS
/*
* Defines for the HostInterruptMask register
*/
#define MPI2_HOST_INTERRUPT_MASK_OFFSET (0x00000034)
#define MPI2_HIM_RESET_IRQ_MASK (0x40000000)
#define MPI2_HIM_REPLY_INT_MASK (0x00000008)
#define MPI2_HIM_RIM MPI2_HIM_REPLY_INT_MASK
#define MPI2_HIM_IOC2SYS_DB_MASK (0x00000001)
#define MPI2_HIM_DIM MPI2_HIM_IOC2SYS_DB_MASK
/*
* Offsets for DCRData and address
*/
#define MPI2_DCR_DATA_OFFSET (0x00000038)
#define MPI2_DCR_ADDRESS_OFFSET (0x0000003C)
/*
* Offset for the Reply Free Queue
*/
#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET (0x00000048)
/*
* Defines for the Reply Descriptor Post Queue
*/
#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C)
#define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF)
#define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000)
#define MPI2_RPHI_MSIX_INDEX_SHIFT (24)
/*
* Defines for the HCBSize and address
*/
#define MPI2_HCB_SIZE_OFFSET (0x00000074)
#define MPI2_HCB_SIZE_SIZE_MASK (0xFFFFF000)
#define MPI2_HCB_SIZE_HCB_ENABLE (0x00000001)
#define MPI2_HCB_ADDRESS_LOW_OFFSET (0x00000078)
#define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C)
/*
* Offsets for the Request Queue
*/
#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0)
#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4)
/*****************************************************************************
*
* Message Descriptors
*
*****************************************************************************/
/* Request Descriptors */
/* Default Request Descriptor */
typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR
{
U8 RequestFlags; /* 0x00 */
U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U16 LMID; /* 0x04 */
U16 DescriptorTypeDependent; /* 0x06 */
} MPI2_DEFAULT_REQUEST_DESCRIPTOR,
MPI2_POINTER PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR,
Mpi2DefaultRequestDescriptor_t, MPI2_POINTER pMpi2DefaultRequestDescriptor_t;
/* defines for the RequestFlags field */
#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E)
#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00)
#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02)
#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06)
#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08)
#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A)
#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
/* High Priority Request Descriptor */
typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR
{
U8 RequestFlags; /* 0x00 */
U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U16 LMID; /* 0x04 */
U16 Reserved1; /* 0x06 */
} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
MPI2_POINTER PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
Mpi2HighPriorityRequestDescriptor_t,
MPI2_POINTER pMpi2HighPriorityRequestDescriptor_t;
/* SCSI IO Request Descriptor */
typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR
{
U8 RequestFlags; /* 0x00 */
U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U16 LMID; /* 0x04 */
U16 DevHandle; /* 0x06 */
} MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
Mpi2SCSIIORequestDescriptor_t, MPI2_POINTER pMpi2SCSIIORequestDescriptor_t;
/* SCSI Target Request Descriptor */
typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR
{
U8 RequestFlags; /* 0x00 */
U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U16 LMID; /* 0x04 */
U16 IoIndex; /* 0x06 */
} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
MPI2_POINTER PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
Mpi2SCSITargetRequestDescriptor_t,
MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t;
/* RAID Accelerator Request Descriptor */
typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR
{
U8 RequestFlags; /* 0x00 */
U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U16 LMID; /* 0x04 */
U16 Reserved; /* 0x06 */
} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
MPI2_POINTER PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
Mpi2RAIDAcceleratorRequestDescriptor_t,
MPI2_POINTER pMpi2RAIDAcceleratorRequestDescriptor_t;
/* union of Request Descriptors */
typedef union _MPI2_REQUEST_DESCRIPTOR_UNION
{
MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority;
MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO;
MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
U64 Words;
} MPI2_REQUEST_DESCRIPTOR_UNION, MPI2_POINTER PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t;
/* Reply Descriptors */
/* Default Reply Descriptor */
typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR
{
U8 ReplyFlags; /* 0x00 */
U8 MSIxIndex; /* 0x01 */
U16 DescriptorTypeDependent1; /* 0x02 */
U32 DescriptorTypeDependent2; /* 0x04 */
} MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR,
Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t;
/* defines for the ReplyFlags field */
#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F)
#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00)
#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01)
#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02)
#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03)
#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05)
#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
/* values for marking a reply descriptor as unused */
#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF)
#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK (0xFFFFFFFF)
/* Address Reply Descriptor */
typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR
{
U8 ReplyFlags; /* 0x00 */
U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U32 ReplyFrameAddress; /* 0x04 */
} MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR,
Mpi2AddressReplyDescriptor_t, MPI2_POINTER pMpi2AddressReplyDescriptor_t;
#define MPI2_ADDRESS_REPLY_SMID_INVALID (0x00)
/* SCSI IO Success Reply Descriptor */
typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
{
U8 ReplyFlags; /* 0x00 */
U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U16 TaskTag; /* 0x04 */
U16 Reserved1; /* 0x06 */
} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
Mpi2SCSIIOSuccessReplyDescriptor_t,
MPI2_POINTER pMpi2SCSIIOSuccessReplyDescriptor_t;
/* TargetAssist Success Reply Descriptor */
typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR
{
U8 ReplyFlags; /* 0x00 */
U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U8 SequenceNumber; /* 0x04 */
U8 Reserved1; /* 0x05 */
U16 IoIndex; /* 0x06 */
} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
MPI2_POINTER PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
Mpi2TargetAssistSuccessReplyDescriptor_t,
MPI2_POINTER pMpi2TargetAssistSuccessReplyDescriptor_t;
/* Target Command Buffer Reply Descriptor */
typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR
{
U8 ReplyFlags; /* 0x00 */
U8 MSIxIndex; /* 0x01 */
U8 VP_ID; /* 0x02 */
U8 Flags; /* 0x03 */
U16 InitiatorDevHandle; /* 0x04 */
U16 IoIndex; /* 0x06 */
} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
MPI2_POINTER PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
Mpi2TargetCommandBufferReplyDescriptor_t,
MPI2_POINTER pMpi2TargetCommandBufferReplyDescriptor_t;
/* defines for Flags field */
#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F)
/* RAID Accelerator Success Reply Descriptor */
typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
{
U8 ReplyFlags; /* 0x00 */
U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U32 Reserved; /* 0x04 */
} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
Mpi2RAIDAcceleratorSuccessReplyDescriptor_t,
MPI2_POINTER pMpi2RAIDAcceleratorSuccessReplyDescriptor_t;
/* union of Reply Descriptors */
typedef union _MPI2_REPLY_DESCRIPTORS_UNION
{
MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply;
MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess;
MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess;
MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess;
U64 Words;
} MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION,
Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t;
/*****************************************************************************
*
* Message Functions
*
*****************************************************************************/
#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) /* SCSI IO */
#define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01) /* SCSI Task Management */
#define MPI2_FUNCTION_IOC_INIT (0x02) /* IOC Init */
#define MPI2_FUNCTION_IOC_FACTS (0x03) /* IOC Facts */
#define MPI2_FUNCTION_CONFIG (0x04) /* Configuration */
#define MPI2_FUNCTION_PORT_FACTS (0x05) /* Port Facts */
#define MPI2_FUNCTION_PORT_ENABLE (0x06) /* Port Enable */
#define MPI2_FUNCTION_EVENT_NOTIFICATION (0x07) /* Event Notification */
#define MPI2_FUNCTION_EVENT_ACK (0x08) /* Event Acknowledge */
#define MPI2_FUNCTION_FW_DOWNLOAD (0x09) /* FW Download */
#define MPI2_FUNCTION_TARGET_ASSIST (0x0B) /* Target Assist */
#define MPI2_FUNCTION_TARGET_STATUS_SEND (0x0C) /* Target Status Send */
#define MPI2_FUNCTION_TARGET_MODE_ABORT (0x0D) /* Target Mode Abort */
#define MPI2_FUNCTION_FW_UPLOAD (0x12) /* FW Upload */
#define MPI2_FUNCTION_RAID_ACTION (0x15) /* RAID Action */
#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) /* SCSI IO RAID Passthrough */
#define MPI2_FUNCTION_TOOLBOX (0x17) /* Toolbox */
#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) /* SCSI Enclosure Processor */
#define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) /* SMP Passthrough */
#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) /* SAS IO Unit Control */
#define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) /* SATA Passthrough */
#define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) /* Diagnostic Buffer Post */
#define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */
#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) /* Target Command Buffer Post Base */
#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) /* Target Command Buffer Post List */
#define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) /* RAID Accelerator */
#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F) /* Host Based Discovery Action */
#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30) /* Power Management Control */
#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) /* beginning of product-specific range */
#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF) /* end of product-specific range */
/* Doorbell functions */
#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40)
#define MPI2_FUNCTION_HANDSHAKE (0x42)
/*****************************************************************************
*
* IOC Status Values
*
*****************************************************************************/
/* mask for IOCStatus status value */
#define MPI2_IOCSTATUS_MASK (0x7FFF)
/****************************************************************************
* Common IOCStatus values for all replies
****************************************************************************/
#define MPI2_IOCSTATUS_SUCCESS (0x0000)
#define MPI2_IOCSTATUS_INVALID_FUNCTION (0x0001)
#define MPI2_IOCSTATUS_BUSY (0x0002)
#define MPI2_IOCSTATUS_INVALID_SGL (0x0003)
#define MPI2_IOCSTATUS_INTERNAL_ERROR (0x0004)
#define MPI2_IOCSTATUS_INVALID_VPID (0x0005)
#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006)
#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007)
#define MPI2_IOCSTATUS_INVALID_STATE (0x0008)
#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009)
/****************************************************************************
* Config IOCStatus values
****************************************************************************/
#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020)
#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021)
#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022)
#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA (0x0023)
#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024)
#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025)
/****************************************************************************
* SCSI IO Reply
****************************************************************************/
#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040)
#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042)
#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043)
#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044)
#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045)
#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046)
#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047)
#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048)
#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049)
#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A)
#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B)
#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C)
/****************************************************************************
* For use by SCSI Initiator and SCSI Target end-to-end data protection
****************************************************************************/
#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR (0x004D)
#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E)
#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F)
/****************************************************************************
* SCSI Target values
****************************************************************************/
#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062)
#define MPI2_IOCSTATUS_TARGET_ABORTED (0x0063)
#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064)
#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION (0x0065)
#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A)
#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D)
#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F)
#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070)
#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071)
/****************************************************************************
* Serial Attached SCSI values
****************************************************************************/
#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091)
/****************************************************************************
* Diagnostic Buffer Post / Diagnostic Release values
****************************************************************************/
#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0)
/****************************************************************************
* RAID Accelerator values
****************************************************************************/
#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR (0x00B0)
/****************************************************************************
* IOCStatus flag to indicate that log info is available
****************************************************************************/
#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000)
/****************************************************************************
* IOCLogInfo Types
****************************************************************************/
#define MPI2_IOCLOGINFO_TYPE_MASK (0xF0000000)
#define MPI2_IOCLOGINFO_TYPE_SHIFT (28)
#define MPI2_IOCLOGINFO_TYPE_NONE (0x0)
#define MPI2_IOCLOGINFO_TYPE_SCSI (0x1)
#define MPI2_IOCLOGINFO_TYPE_FC (0x2)
#define MPI2_IOCLOGINFO_TYPE_SAS (0x3)
#define MPI2_IOCLOGINFO_TYPE_ISCSI (0x4)
#define MPI2_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF)
/*****************************************************************************
*
* Standard Message Structures
*
*****************************************************************************/
/****************************************************************************
* Request Message Header for all request messages
****************************************************************************/
typedef struct _MPI2_REQUEST_HEADER
{
U16 FunctionDependent1; /* 0x00 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 FunctionDependent2; /* 0x04 */
U8 FunctionDependent3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved1; /* 0x0A */
} MPI2_REQUEST_HEADER, MPI2_POINTER PTR_MPI2_REQUEST_HEADER,
MPI2RequestHeader_t, MPI2_POINTER pMPI2RequestHeader_t;
/****************************************************************************
* Default Reply
****************************************************************************/
typedef struct _MPI2_DEFAULT_REPLY
{
U16 FunctionDependent1; /* 0x00 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 FunctionDependent2; /* 0x04 */
U8 FunctionDependent3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved1; /* 0x0A */
U16 FunctionDependent5; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
} MPI2_DEFAULT_REPLY, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY,
MPI2DefaultReply_t, MPI2_POINTER pMPI2DefaultReply_t;
/* common version structure/union used in messages and configuration pages */
typedef struct _MPI2_VERSION_STRUCT
{
U8 Dev; /* 0x00 */
U8 Unit; /* 0x01 */
U8 Minor; /* 0x02 */
U8 Major; /* 0x03 */
} MPI2_VERSION_STRUCT;
typedef union _MPI2_VERSION_UNION
{
MPI2_VERSION_STRUCT Struct;
U32 Word;
} MPI2_VERSION_UNION;
/* LUN field defines, common to many structures */
#define MPI2_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF)
#define MPI2_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000)
#define MPI2_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF)
#define MPI2_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000)
#define MPI2_LUN_LEVEL_1_WORD (0xFF00)
#define MPI2_LUN_LEVEL_1_DWORD (0x0000FF00)
/*****************************************************************************
*
* Fusion-MPT MPI Scatter Gather Elements
*
*****************************************************************************/
/****************************************************************************
* MPI Simple Element structures
****************************************************************************/
typedef struct _MPI2_SGE_SIMPLE32
{
U32 FlagsLength;
U32 Address;
} MPI2_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_SGE_SIMPLE32,
Mpi2SGESimple32_t, MPI2_POINTER pMpi2SGESimple32_t;
typedef struct _MPI2_SGE_SIMPLE64
{
U32 FlagsLength;
U64 Address;
} MPI2_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_SGE_SIMPLE64,
Mpi2SGESimple64_t, MPI2_POINTER pMpi2SGESimple64_t;
typedef struct _MPI2_SGE_SIMPLE_UNION
{
U32 FlagsLength;
union
{
U32 Address32;
U64 Address64;
} u;
} MPI2_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_SIMPLE_UNION,
Mpi2SGESimpleUnion_t, MPI2_POINTER pMpi2SGESimpleUnion_t;
/****************************************************************************
* MPI Chain Element structures
****************************************************************************/
typedef struct _MPI2_SGE_CHAIN32
{
U16 Length;
U8 NextChainOffset;
U8 Flags;
U32 Address;
} MPI2_SGE_CHAIN32, MPI2_POINTER PTR_MPI2_SGE_CHAIN32,
Mpi2SGEChain32_t, MPI2_POINTER pMpi2SGEChain32_t;
typedef struct _MPI2_SGE_CHAIN64
{
U16 Length;
U8 NextChainOffset;
U8 Flags;
U64 Address;
} MPI2_SGE_CHAIN64, MPI2_POINTER PTR_MPI2_SGE_CHAIN64,
Mpi2SGEChain64_t, MPI2_POINTER pMpi2SGEChain64_t;
typedef struct _MPI2_SGE_CHAIN_UNION
{
U16 Length;
U8 NextChainOffset;
U8 Flags;
union
{
U32 Address32;
U64 Address64;
} u;
} MPI2_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_SGE_CHAIN_UNION,
Mpi2SGEChainUnion_t, MPI2_POINTER pMpi2SGEChainUnion_t;
/****************************************************************************
* MPI Transaction Context Element structures
****************************************************************************/
typedef struct _MPI2_SGE_TRANSACTION32
{
U8 Reserved;
U8 ContextSize;
U8 DetailsLength;
U8 Flags;
U32 TransactionContext[1];
U32 TransactionDetails[1];
} MPI2_SGE_TRANSACTION32, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION32,
Mpi2SGETransaction32_t, MPI2_POINTER pMpi2SGETransaction32_t;
typedef struct _MPI2_SGE_TRANSACTION64
{
U8 Reserved;
U8 ContextSize;
U8 DetailsLength;
U8 Flags;
U32 TransactionContext[2];
U32 TransactionDetails[1];
} MPI2_SGE_TRANSACTION64, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION64,
Mpi2SGETransaction64_t, MPI2_POINTER pMpi2SGETransaction64_t;
typedef struct _MPI2_SGE_TRANSACTION96
{
U8 Reserved;
U8 ContextSize;
U8 DetailsLength;
U8 Flags;
U32 TransactionContext[3];
U32 TransactionDetails[1];
} MPI2_SGE_TRANSACTION96, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION96,
Mpi2SGETransaction96_t, MPI2_POINTER pMpi2SGETransaction96_t;
typedef struct _MPI2_SGE_TRANSACTION128
{
U8 Reserved;
U8 ContextSize;
U8 DetailsLength;
U8 Flags;
U32 TransactionContext[4];
U32 TransactionDetails[1];
} MPI2_SGE_TRANSACTION128, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION128,
Mpi2SGETransaction_t128, MPI2_POINTER pMpi2SGETransaction_t128;
typedef struct _MPI2_SGE_TRANSACTION_UNION
{
U8 Reserved;
U8 ContextSize;
U8 DetailsLength;
U8 Flags;
union
{
U32 TransactionContext32[1];
U32 TransactionContext64[2];
U32 TransactionContext96[3];
U32 TransactionContext128[4];
} u;
U32 TransactionDetails[1];
} MPI2_SGE_TRANSACTION_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION_UNION,
Mpi2SGETransactionUnion_t, MPI2_POINTER pMpi2SGETransactionUnion_t;
/****************************************************************************
* MPI SGE union for IO SGL's
****************************************************************************/
typedef struct _MPI2_MPI_SGE_IO_UNION
{
union
{
MPI2_SGE_SIMPLE_UNION Simple;
MPI2_SGE_CHAIN_UNION Chain;
} u;
} MPI2_MPI_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_IO_UNION,
Mpi2MpiSGEIOUnion_t, MPI2_POINTER pMpi2MpiSGEIOUnion_t;
/****************************************************************************
* MPI SGE union for SGL's with Simple and Transaction elements
****************************************************************************/
typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION
{
union
{
MPI2_SGE_SIMPLE_UNION Simple;
MPI2_SGE_TRANSACTION_UNION Transaction;
} u;
} MPI2_SGE_TRANS_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANS_SIMPLE_UNION,
Mpi2SGETransSimpleUnion_t, MPI2_POINTER pMpi2SGETransSimpleUnion_t;
/****************************************************************************
* All MPI SGE types union
****************************************************************************/
typedef struct _MPI2_MPI_SGE_UNION
{
union
{
MPI2_SGE_SIMPLE_UNION Simple;
MPI2_SGE_CHAIN_UNION Chain;
MPI2_SGE_TRANSACTION_UNION Transaction;
} u;
} MPI2_MPI_SGE_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_UNION,
Mpi2MpiSgeUnion_t, MPI2_POINTER pMpi2MpiSgeUnion_t;
/****************************************************************************
* MPI SGE field definition and masks
****************************************************************************/
/* Flags field bit definitions */
#define MPI2_SGE_FLAGS_LAST_ELEMENT (0x80)
#define MPI2_SGE_FLAGS_END_OF_BUFFER (0x40)
#define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30)
#define MPI2_SGE_FLAGS_LOCAL_ADDRESS (0x08)
#define MPI2_SGE_FLAGS_DIRECTION (0x04)
#define MPI2_SGE_FLAGS_ADDRESS_SIZE (0x02)
#define MPI2_SGE_FLAGS_END_OF_LIST (0x01)
#define MPI2_SGE_FLAGS_SHIFT (24)
#define MPI2_SGE_LENGTH_MASK (0x00FFFFFF)
#define MPI2_SGE_CHAIN_LENGTH_MASK (0x0000FFFF)
/* Element Type */
#define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT (0x00)
#define MPI2_SGE_FLAGS_SIMPLE_ELEMENT (0x10)
#define MPI2_SGE_FLAGS_CHAIN_ELEMENT (0x30)
#define MPI2_SGE_FLAGS_ELEMENT_MASK (0x30)
/* Address location */
#define MPI2_SGE_FLAGS_SYSTEM_ADDRESS (0x00)
/* Direction */
#define MPI2_SGE_FLAGS_IOC_TO_HOST (0x00)
#define MPI2_SGE_FLAGS_HOST_TO_IOC (0x04)
#define MPI2_SGE_FLAGS_DEST (MPI2_SGE_FLAGS_IOC_TO_HOST)
#define MPI2_SGE_FLAGS_SOURCE (MPI2_SGE_FLAGS_HOST_TO_IOC)
/* Address Size */
#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00)
#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02)
/* Context Size */
#define MPI2_SGE_FLAGS_32_BIT_CONTEXT (0x00)
#define MPI2_SGE_FLAGS_64_BIT_CONTEXT (0x02)
#define MPI2_SGE_FLAGS_96_BIT_CONTEXT (0x04)
#define MPI2_SGE_FLAGS_128_BIT_CONTEXT (0x06)
#define MPI2_SGE_CHAIN_OFFSET_MASK (0x00FF0000)
#define MPI2_SGE_CHAIN_OFFSET_SHIFT (16)
/****************************************************************************
* MPI SGE operation Macros
****************************************************************************/
/* SIMPLE FlagsLength manipulations... */
#define MPI2_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_SGE_FLAGS_SHIFT)
#define MPI2_SGE_GET_FLAGS(f) (((f) & ~MPI2_SGE_LENGTH_MASK) >> MPI2_SGE_FLAGS_SHIFT)
#define MPI2_SGE_LENGTH(f) ((f) & MPI2_SGE_LENGTH_MASK)
#define MPI2_SGE_CHAIN_LENGTH(f) ((f) & MPI2_SGE_CHAIN_LENGTH_MASK)
#define MPI2_SGE_SET_FLAGS_LENGTH(f,l) (MPI2_SGE_SET_FLAGS(f) | MPI2_SGE_LENGTH(l))
#define MPI2_pSGE_GET_FLAGS(psg) MPI2_SGE_GET_FLAGS((psg)->FlagsLength)
#define MPI2_pSGE_GET_LENGTH(psg) MPI2_SGE_LENGTH((psg)->FlagsLength)
#define MPI2_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_SGE_SET_FLAGS_LENGTH(f,l)
/* CAUTION - The following are READ-MODIFY-WRITE! */
#define MPI2_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI2_SGE_SET_FLAGS(f)
#define MPI2_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI2_SGE_LENGTH(l)
#define MPI2_GET_CHAIN_OFFSET(x) ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> MPI2_SGE_CHAIN_OFFSET_SHIFT)
/*****************************************************************************
*
* Fusion-MPT IEEE Scatter Gather Elements
*
*****************************************************************************/
/****************************************************************************
* IEEE Simple Element structures
****************************************************************************/
typedef struct _MPI2_IEEE_SGE_SIMPLE32
{
U32 Address;
U32 FlagsLength;
} MPI2_IEEE_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE32,
Mpi2IeeeSgeSimple32_t, MPI2_POINTER pMpi2IeeeSgeSimple32_t;
typedef struct _MPI2_IEEE_SGE_SIMPLE64
{
U64 Address;
U32 Length;
U16 Reserved1;
U8 Reserved2;
U8 Flags;
} MPI2_IEEE_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE64,
Mpi2IeeeSgeSimple64_t, MPI2_POINTER pMpi2IeeeSgeSimple64_t;
typedef union _MPI2_IEEE_SGE_SIMPLE_UNION
{
MPI2_IEEE_SGE_SIMPLE32 Simple32;
MPI2_IEEE_SGE_SIMPLE64 Simple64;
} MPI2_IEEE_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE_UNION,
Mpi2IeeeSgeSimpleUnion_t, MPI2_POINTER pMpi2IeeeSgeSimpleUnion_t;
/****************************************************************************
* IEEE Chain Element structures
****************************************************************************/
typedef MPI2_IEEE_SGE_SIMPLE32 MPI2_IEEE_SGE_CHAIN32;
typedef MPI2_IEEE_SGE_SIMPLE64 MPI2_IEEE_SGE_CHAIN64;
typedef union _MPI2_IEEE_SGE_CHAIN_UNION
{
MPI2_IEEE_SGE_CHAIN32 Chain32;
MPI2_IEEE_SGE_CHAIN64 Chain64;
} MPI2_IEEE_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_CHAIN_UNION,
Mpi2IeeeSgeChainUnion_t, MPI2_POINTER pMpi2IeeeSgeChainUnion_t;
/****************************************************************************
* All IEEE SGE types union
****************************************************************************/
typedef struct _MPI2_IEEE_SGE_UNION
{
union
{
MPI2_IEEE_SGE_SIMPLE_UNION Simple;
MPI2_IEEE_SGE_CHAIN_UNION Chain;
} u;
} MPI2_IEEE_SGE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_UNION,
Mpi2IeeeSgeUnion_t, MPI2_POINTER pMpi2IeeeSgeUnion_t;
/****************************************************************************
* IEEE SGE field definitions and masks
****************************************************************************/
/* Flags field bit definitions */
#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK (0x80)
#define MPI2_IEEE32_SGE_FLAGS_SHIFT (24)
#define MPI2_IEEE32_SGE_LENGTH_MASK (0x00FFFFFF)
/* Element Type */
#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00)
#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80)
/* Data Location Address Space */
#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03)
#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) /* IEEE Simple Element only */
#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01) /* IEEE Simple Element only */
#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02)
#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03) /* IEEE Simple Element only */
#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR (0x03) /* IEEE Chain Element only */
/****************************************************************************
* IEEE SGE operation Macros
****************************************************************************/
/* SIMPLE FlagsLength manipulations... */
#define MPI2_IEEE32_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT)
#define MPI2_IEEE32_SGE_GET_FLAGS(f) (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) >> MPI2_IEEE32_SGE_FLAGS_SHIFT)
#define MPI2_IEEE32_SGE_LENGTH(f) ((f) & MPI2_IEEE32_SGE_LENGTH_MASK)
#define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_IEEE32_SGE_SET_FLAGS(f) | MPI2_IEEE32_SGE_LENGTH(l))
#define MPI2_IEEE32_pSGE_GET_FLAGS(psg) MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength)
#define MPI2_IEEE32_pSGE_GET_LENGTH(psg) MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength)
#define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f,l)
/* CAUTION - The following are READ-MODIFY-WRITE! */
#define MPI2_IEEE32_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI2_IEEE32_SGE_SET_FLAGS(f)
#define MPI2_IEEE32_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI2_IEEE32_SGE_LENGTH(l)
/*****************************************************************************
*
* Fusion-MPT MPI/IEEE Scatter Gather Unions
*
*****************************************************************************/
typedef union _MPI2_SIMPLE_SGE_UNION
{
MPI2_SGE_SIMPLE_UNION MpiSimple;
MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
} MPI2_SIMPLE_SGE_UNION, MPI2_POINTER PTR_MPI2_SIMPLE_SGE_UNION,
Mpi2SimpleSgeUntion_t, MPI2_POINTER pMpi2SimpleSgeUntion_t;
typedef union _MPI2_SGE_IO_UNION
{
MPI2_SGE_SIMPLE_UNION MpiSimple;
MPI2_SGE_CHAIN_UNION MpiChain;
MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;
} MPI2_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_SGE_IO_UNION,
Mpi2SGEIOUnion_t, MPI2_POINTER pMpi2SGEIOUnion_t;
/****************************************************************************
*
* Values for SGLFlags field, used in many request messages with an SGL
*
****************************************************************************/
/* values for MPI SGL Data Location Address Space subfield */
#define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK (0x0C)
#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE (0x00)
#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE (0x04)
#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08)
#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C)
/* values for SGL Type subfield */
#define MPI2_SGLFLAGS_SGL_TYPE_MASK (0x03)
#define MPI2_SGLFLAGS_SGL_TYPE_MPI (0x00)
#define MPI2_SGLFLAGS_SGL_TYPE_IEEE32 (0x01)
#define MPI2_SGLFLAGS_SGL_TYPE_IEEE64 (0x02)
#endif
Reference in New Issue View Git Blame Copy Permalink