freebsd-dev/sys/arm/at91
Gleb Smirnoff eb1b1807af Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags within sys.

Exceptions:

- sys/contrib not touched
- sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
..
at91_aicreg.h Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. 2010-07-14 00:48:53 +00:00
at91_cfata.c Eliminate devclass_find_free_unit call here, since -1 gives the same 2009-06-10 17:39:19 +00:00
at91_machdep.c Reduce differences between these two initarms a bit more. 2012-11-08 04:02:36 +00:00
at91_mci.c Make this work on the AT91SAM9G20: 2012-08-29 06:42:39 +00:00
at91_mcireg.h - Add support for MCI1 revision 2xx controllers and a work-around for their 2012-04-22 00:43:32 +00:00
at91_pdcreg.h Tweak the disclaimer section of the license to match COPYRIGHT, for 2008-11-25 00:13:26 +00:00
at91_pio_sam9g20.h Add support for the AT91SAM9260 2010-10-06 22:40:27 +00:00
at91_pio_sam9g45.h Add support for the Atmel AT91SAM9G45 CPU. 2012-07-26 08:01:25 +00:00
at91_pio.c Throw this debug behind bootverbose. The information isn't all that 2012-06-16 04:34:46 +00:00
at91_pioreg.h Hack to unbreak boot2 for at91rm9200 boot loader. When the at91sam 2012-05-11 14:40:25 +00:00
at91_piovar.h - Try to bring these files closer to style(9). 2012-04-14 11:29:32 +00:00
at91_pit.c at91pit->at91_pit for consistnecy with other drivers. 2012-07-11 17:11:54 +00:00
at91_pitreg.h at91pit->at91_pit for consistnecy with other drivers. 2012-07-11 17:11:54 +00:00
at91_pmc.c Make some at91_pcm_xxx() functions NULL safe. 2012-08-21 19:55:24 +00:00
at91_pmcreg.h Add charge pump current register. 2012-08-10 04:47:20 +00:00
at91_pmcvar.h Correct the PLLA setting functions and centralize. 2012-08-11 05:45:19 +00:00
at91_reset.S Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way 2012-07-10 02:14:50 +00:00
at91_rst.c at91$DEV->at91_$DEV to match other Atmel drivers. Also, export 2012-07-11 17:11:07 +00:00
at91_rstreg.h at91$DEV->at91_$DEV to match other Atmel drivers. Also, export 2012-07-11 17:11:07 +00:00
at91_rtc.c Loop reading the RTC registers until the same values are obtained 2012-10-07 20:36:46 +00:00
at91_rtcreg.h Use the RTC unit to get the time. This works on all known AT91SAM9* 2012-10-07 01:58:32 +00:00
at91_spi.c Fetch the chip select in the bridge driver, like all the other spi 2012-08-23 22:38:37 +00:00
at91_spireg.h - Prepend the device description with "AT91" to reflect its nature. [1] 2012-06-03 00:54:10 +00:00
at91_ssc.c Strip trailing whitespace before other changes. 2012-06-13 04:52:19 +00:00
at91_sscreg.h Tweak the disclaimer section of the license to match COPYRIGHT, for 2008-11-25 00:13:26 +00:00
at91_st.c Make the SoC stuff a little more modular, and start to move away from 2012-07-11 20:17:14 +00:00
at91_streg.h Make the SoC stuff a little more modular, and start to move away from 2012-07-11 20:17:14 +00:00
at91_twi.c Fix a stray debug that I committed accidentally years ago... 2012-06-22 06:44:22 +00:00
at91_twiio.h Tweak the disclaimer section of the license to match COPYRIGHT, for 2008-11-25 00:13:26 +00:00
at91_twireg.h Add support for the Atmel SAM9XE familiy of microcontrollers, which 2012-04-14 17:09:38 +00:00
at91_usartreg.h Tweak the disclaimer section of the license to match COPYRIGHT, for 2008-11-25 00:13:26 +00:00
at91_wdt.c Add support for the Atmel SAM9XE familiy of microcontrollers, which 2012-04-14 17:09:38 +00:00
at91_wdtreg.h Strip trailing whitespace before other changes. 2012-06-13 04:52:19 +00:00
at91.c Move unmask IRQ function call up to nexus device level. 2012-07-17 03:18:12 +00:00
at91board.h Create a generic way to support multiple boards within an 2012-07-07 05:02:39 +00:00
at91reg.h The system IRQ is always IRQ 1. Make it so. 2012-07-10 02:39:03 +00:00
at91rm92reg.h Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way 2012-07-10 02:14:50 +00:00
at91rm9200_devices.c Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
at91rm9200.c Complete the transition away from newbus to populate the children to 2012-07-12 13:45:58 +00:00
at91rm9200var.h Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
at91sam9g20.c Correct the PLLA setting functions and centralize. 2012-08-11 05:45:19 +00:00
at91sam9g20reg.h Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way 2012-07-10 02:14:50 +00:00
at91sam9g45.c Correct the PLLA setting functions and centralize. 2012-08-11 05:45:19 +00:00
at91sam9g45reg.h Add support for the Atmel AT91SAM9G45 CPU. 2012-07-26 08:01:25 +00:00
at91sam9x5.c Correct the PLLA setting functions and centralize. 2012-08-11 05:45:19 +00:00
at91sam9x5reg.h These files will support the whole at91sam9x5 family when done, 2012-07-30 21:30:43 +00:00
at91sam9260.c Update comments about setting PLLA and refernce the tables in the 2012-08-11 05:12:46 +00:00
at91sam9260reg.h Missed one of the special AT91SAM9xxx_BASE defines. This should be 2012-07-10 02:44:15 +00:00
at91soc.c Make the SoC stuff a little more modular, and start to move away from 2012-07-11 20:17:14 +00:00
at91soc.h Make the SoC stuff a little more modular, and start to move away from 2012-07-11 20:17:14 +00:00
at91var.h Remember where we found the DBGU and use that for our console. 2012-07-12 19:11:37 +00:00
board_bwct.c Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
board_eb9200.c Preliminary Embest ATEB9200 support. 2012-08-16 05:03:59 +00:00
board_ethernut5.c uboot should be telling us it is an ETHERNUT5 for this board. Tag it 2012-07-14 06:00:37 +00:00
board_hl200.c Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
board_hl201.c Create a generic way to support multiple boards within an 2012-07-07 05:02:39 +00:00
board_kb920x.c Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
board_qila9g20.c Create a generic way to support multiple boards within an 2012-07-07 05:02:39 +00:00
board_sam9g20ek.c Create a generic way to support multiple boards within an 2012-07-07 05:02:39 +00:00
board_sam9x25ek.c Create a generic way to support multiple boards within an 2012-07-07 05:02:39 +00:00
board_sam9260ek.c Turns out the ETHERNUT5 isn't anything like the SAM9260-EK. Make this 2012-07-27 05:33:55 +00:00
board_sn9g45.c Add new at91sam9g45 support and sn9g45 board to the ATMEL kernel. 2012-07-27 16:38:02 +00:00
board_tsc4370.c Configure the peripheral pins for MCI devices. Eliminate the now-unused 2012-07-15 05:41:43 +00:00
files.at91 Unbreak building a kernel with EHCI: there's no ehci_atmelarm.c. 2012-11-26 23:30:47 +00:00
if_ate.c Mechanically substitute flags from historic mbuf allocator with 2012-12-05 08:04:20 +00:00
if_atereg.h if_ate.c: 2010-10-06 22:25:21 +00:00
if_macb.c Mechanically substitute flags from historic mbuf allocator with 2012-12-05 08:04:20 +00:00
if_macbreg.h Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. 2010-07-14 00:48:53 +00:00
if_macbvar.h Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. 2010-07-14 00:48:53 +00:00
std.at91 Set machine correctly on ARM. This allows universe to use the correct world 2012-08-18 05:48:19 +00:00
std.at91sam9 Set machine correctly on ARM. This allows universe to use the correct world 2012-08-18 05:48:19 +00:00
std.at91sam9g45 Set machine correctly on ARM. This allows universe to use the correct world 2012-08-18 05:48:19 +00:00
std.atmel Set machine correctly on ARM. This allows universe to use the correct world 2012-08-18 05:48:19 +00:00
std.bwct Convert BWCT and HL200 over to new board mechanism as well. The 2008-11-25 19:05:46 +00:00
std.eb9200 Preliminary Embest ATEB9200 support. 2012-08-16 05:03:59 +00:00
std.ethernut5 Opt-in rather than opt-out of the SoC. We don't really support 2012-07-01 06:34:17 +00:00
std.hl200 Compute the master clock frequency, so we no longer need to have it 2012-05-29 03:23:18 +00:00
std.hl201 Opt-in rather than opt-out of the SoC. We don't really support 2012-07-01 06:34:17 +00:00
std.kb920x Compute the master clock frequency, so we no longer need to have it 2012-05-29 03:23:18 +00:00
std.qila9g20 Opt-in rather than opt-out of the SoC. We don't really support 2012-07-01 06:34:17 +00:00
std.sam9g20ek Opt-in rather than opt-out of the SoC. We don't really support 2012-07-01 06:34:17 +00:00
std.sam9x25ek These files will support the whole at91sam9x5 family when done, 2012-07-30 21:30:43 +00:00
std.sam9260ek Add preliminary support for Atmel SAM9260-EK evaluation kit. 2012-07-14 06:13:23 +00:00
std.sn9g45 Add support for the DesignA Electronics Snapper9g45 System on Module. 2012-07-26 08:05:28 +00:00
std.tsc4370 Convert BWCT and HL200 over to new board mechanism as well. The 2008-11-25 19:05:46 +00:00
uart_bus_at91usart.c Some models have 6 USARTS + DBGU. Set a consistent name. 2012-07-26 05:46:56 +00:00
uart_cpu_at91usart.c This file is no longer AT91RM9200 specific, but now is generic to all 2012-07-12 19:15:38 +00:00
uart_dev_at91usart.c - Add missing locking in at91_usart_getc(). 2012-05-01 20:42:03 +00:00