d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ae547a3309
freebsd-dev/usr.sbin/xntpd/patches/patch.10
Garrett Wollman d2d2eed188 xntp3.3s from UDel
1994-04-21 00:33:33 +00:00

1926 lines
61 KiB
Plaintext
Raw Blame History

diff -c COPYRIGHT:1.1.1.16 COPYRIGHT:1.21
*** COPYRIGHT:1.1.1.16 Wed Feb 2 18:09:17 1994
--- COPYRIGHT Wed Feb 2 18:09:18 1994
***************
*** 1,6 ****
/******************************************************************************
* *
! * Copyright (c) David L. Mills 1992, 1993, 1994 *
* *
* Permission to use, copy, modify, and distribute this software and its *
* documentation for any purpose and without fee is hereby granted, provided *
--- 1,6 ----
/******************************************************************************
* *
! * Copyright (c) David L. Mills 1992, 1993, 1994 *
* *
* Permission to use, copy, modify, and distribute this software and its *
* documentation for any purpose and without fee is hereby granted, provided *
***************
*** 55,58 ****
* Torsten Duwe <duwe@immd4.informatik.uni-erlangen.de> (Linux Port)
* Paul A Vixie <vixie@vix.com> (TrueTime GPS driver)
* Jim Jagielski <jim@jagubox.gsfc.nasa.gov> (A/UX port)
! */
--- 55,58 ----
* Torsten Duwe <duwe@immd4.informatik.uni-erlangen.de> (Linux Port)
* Paul A Vixie <vixie@vix.com> (TrueTime GPS driver)
* Jim Jagielski <jim@jagubox.gsfc.nasa.gov> (A/UX port)
! */
diff -c doc/xntpd.8:1.1.1.12 doc/xntpd.8:3.24
*** doc/xntpd.8:1.1.1.12 Wed Feb 2 18:10:44 1994
--- doc/xntpd.8 Wed Feb 2 18:10:45 1994
***************
*** 446,451 ****
--- 446,467 ----
.Ip notrust 10
Treat these hosts normally in other respects, but never use them as
synchronization sources.
+ .Ip limited 10
+ These hosts are subject to limitation of number of clients from the
+ same net. Net in this context refers to the IP notion of net (class A,
+ class B, class C, etc.). Only the first \*(L"client_limit\*(R" hosts
+ that have shown up at the server and that have been active during the
+ last \*(L"client_limit_period\*(R" seconds are accepted. Requests from
+ other clients from the same net are rejected. Only time request
+ packets are taken into account. \*(L"Private\*(R", \*(L"control\*(R",
+ and \*(L"broadcast\*(R" packets are not subject to client limitation
+ and therefore are not contributing to client count. History of clients
+ is kept using the monitoring capability of
+ .IR xntpd .
+ Thus, monitoring is active as long as there is a restriction entry
+ with the \*(L"limited\*(R" flag. The default value for
+ \*(L"client_limit\*(R" is 3. The default value for
+ \*(L"client_limit_period\*(R" is 3600 seconds.
.Ip ntpport 10
This is actually a match algorithm modifier, rather than a restriction
flag. Its presence causes the restriction entry to be matched only if
***************
*** 469,474 ****
--- 485,505 ----
considered an alternative to the standard NTP authentication facility. Source
address based restrictions are easily circumvented by a determined cracker.
.PP
+ .B clientlimit
+ .I limit
+ .PP
+ Sets \*(L"client_limit\*(R" to \*(L"limit\*(R", allows configuration
+ of client limitation policy. This variable defines the number of
+ clients from the same network that are allowed to use the server.
+ .PP
+ .B clientperiod
+ .I period
+ .PP
+ Sets \*(L"client_limit_period\*(R", allows configuration of client
+ limitation policy. This variable specifies the number
+ of seconds after which a client is considered inactive and thus no
+ longer is counted for client limit restriction.
+ .PP
.B trap
.I host_address
[
diff -c doc/xntpdc.8:1.1.1.2 doc/xntpdc.8:3.4
*** doc/xntpdc.8:1.1.1.2 Wed Feb 2 18:10:46 1994
--- doc/xntpdc.8 Wed Feb 2 18:10:47 1994
***************
*** 539,544 ****
--- 539,555 ----
Ignore all NTP mode 7 packets which attempt to modify the state of the
server (i.e. run time reconfiguration). Queries which return information
are permitted.
+ .Ip notrap 10
+ Decline to provide mode 6 control message trap service to matching
+ hosts. The trap service is a subsystem of the mode 6 control message
+ protocol which is intended for use by remote event logging programs.
+ .Ip lowpriotrap 10
+ Declare traps set by matching hosts to be low priority. The number
+ of traps a server can maintain is limited (the current limit is 3).
+ Traps are usually assigned on a first come, first served basis, with
+ later trap requestors being denied service. This flag modifies the
+ assignment algorithm by allowing low priority traps to be overridden
+ by later requests for normal priority traps.
.Ip noserve 10
Ignore NTP packets whose mode is other than 7. In effect, time service is
denied, though queries may still be permitted.
***************
*** 549,554 ****
--- 560,582 ----
.Ip notrust 10
Treat these hosts normally in other respects, but never use them as
synchronization sources.
+ .Ip limited 10
+ These hosts are subject to limitation of number of clients from the
+ same net. Net in this context refers to the IP notion of net (class A,
+ class B, class C, etc.). Only the first \*(L"client_limit\*(R" hosts
+ that have shown up at the server and that have been active during the
+ last \*(L"client_limit_period\*(R" seconds are accepted. Requests from
+ other clients from the same net are rejected. Only time request
+ packets are taken into account. \*(L"Private\*(R", \*(L"control\*(R",
+ and \*(L"broadcast\*(R" packets are not subject to client limitation
+ and therefore are not contributing to client count. History of clients
+ is kept using the monitoring capability of
+ .IR xntpd.
+ Thus, monitoring is active as long as there is a restriction entry
+ with the \*(L"limited\*(R" flag. The default value for
+ \*(L"client_limit\*(R" is 3. The default value for
+ \*(L"client_limit_period\*(R" is 3600 seconds. Currently both
+ variables are not runtime configurable.
.Ip ntpport 10
This is actually a match algorithm modifier, rather than a restriction
flag. Its presence causes the restriction entry to be matched only if
diff -c hints/linux:1.1.1.1 hints/linux:1.2
*** hints/linux:1.1.1.1 Wed Feb 2 18:10:58 1994
--- hints/linux Wed Feb 2 18:10:59 1994
***************
*** 1,29 ****
! Requirements: kernel 0.99.14 or newer, libc 4.5 or newer
------------
! With this configuration, xntp should build an run right out of the
! box (see generic hints for how-to), with one big limitation: tickadj doesn't
! work yet. This is especially painful since PCs are usually equipped with
! untuned, badly-drifting quartzes, values up to 200 ppm being no exception.
! Because the loop filter algorithms are limited to compensating no more than
! 100 ppm, currently only one workaround is possible:
! Compile your own kernel and adjust linux/include/linux/timex.h,
! line 67 (in pl14):
!
! #define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
!
! Since this is surely not true for your hardware, adjust the hundreds
! to match your quartz. Adding 100 compensates for a drift of -83.8 ppm
! (1/CLOCK_TICK_RATE). The number gets rounded to the nearest 100 so don't
! bother to tune any finer.
!
! Fixing tickadj is already in my work queue, so the previous comment should be
! obsolete RSN. If you really need to run xntp on any earlier versions of the
! kernel or libc, or have any other question not covered in the READMEs / hint
! files (sorry, necessary comment in the Linux community ;-) feel free to ask
! me (duwe@informatik.uni-erlangen.de)
!
! xntp3.3b of 1993/12/06 : remember to change #define ntp_adjtime adjtimex to
! __adjtimex in the Linux section (line 316). This is hopefully done if you
! (don't :-) see this paragraph in the xntp3.x distribution.
--- 1,9 ----
! Requirements: kernel 0.99.14y or newer, libc 4.5.8 or newer
------------
! With this configuration, xntp should build an run right out of the box
! (see generic hints for how-to). If you really need to run xntp on any earlier
! versions of the kernel or libc, or have any other question not covered in the
! READMEs / hint files (sorry, necessary comment in the Linux community ;-) feel
! free to ask me (duwe@informatik.uni-erlangen.de)
diff -c include/ntp.h:1.1.1.17 include/ntp.h:3.23
*** include/ntp.h:1.1.1.17 Wed Feb 2 18:11:18 1994
--- include/ntp.h Wed Feb 2 18:11:18 1994
***************
*** 612,617 ****
--- 612,620 ----
struct mon_data *hash_prev; /* previous structure in hash list */
struct mon_data *mru_next; /* next structure in MRU list */
struct mon_data *mru_prev; /* previous structure in MRU list */
+ struct mon_data *fifo_next; /* next structure in FIFO list */
+ struct mon_data *fifo_prev; /* previous structure in FIFO list */
+ U_LONG lastdrop; /* last time dropped due to RES_LIMIT*/
U_LONG lasttime; /* last time data updated */
U_LONG firsttime; /* time structure initialized */
U_LONG count; /* count we have seen */
***************
*** 621,627 ****
u_char version; /* version of incoming packet */
};
!
/*
* Structure used for restrictlist entries
*/
--- 624,635 ----
u_char version; /* version of incoming packet */
};
! /*
! * Values used with mon_enabled to indicate reason for enabling monitoring
! */
! #define MON_OFF 0x00 /* no monitoring */
! #define MON_ON 0x01 /* monitoring explicitly enabled */
! #define MON_RES 0x02 /* implicit monitoring for RES_LIMITED */
/*
* Structure used for restrictlist entries
*/
***************
*** 645,654 ****
#define RES_NOPEER 0x20 /* don't allocate memory resources */
#define RES_NOTRAP 0x40 /* don't allow him to set traps */
#define RES_LPTRAP 0x80 /* traps set by him are low priority */
#define RES_ALLFLAGS \
(RES_IGNORE|RES_DONTSERVE|RES_DONTTRUST|RES_NOQUERY\
! |RES_NOMODIFY|RES_NOPEER|RES_NOTRAP|RES_LPTRAP)
/*
* Match flags
--- 653,663 ----
#define RES_NOPEER 0x20 /* don't allocate memory resources */
#define RES_NOTRAP 0x40 /* don't allow him to set traps */
#define RES_LPTRAP 0x80 /* traps set by him are low priority */
+ #define RES_LIMITED 0x100 /* limit per net number of clients */
#define RES_ALLFLAGS \
(RES_IGNORE|RES_DONTSERVE|RES_DONTTRUST|RES_NOQUERY\
! |RES_NOMODIFY|RES_NOPEER|RES_NOTRAP|RES_LPTRAP|RES_LIMITED)
/*
* Match flags
diff -c include/ntp_request.h:1.1.1.7 include/ntp_request.h:3.7
*** include/ntp_request.h:1.1.1.7 Wed Feb 2 18:11:27 1994
--- include/ntp_request.h Wed Feb 2 18:11:28 1994
***************
*** 429,438 ****
--- 429,456 ----
U_LONG processed; /* packets processed */
U_LONG badauth; /* packets dropped because of authorization */
U_LONG wanderhold;
+ U_LONG limitrejected; /* rejected because of client limitation */
};
/*
+ * System stats - old version
+ */
+ struct old_info_sys_stats {
+ U_LONG timeup; /* time we have been up and running */
+ U_LONG timereset; /* time since these were last cleared */
+ U_LONG badstratum; /* packets claiming an invalid stratum */
+ U_LONG oldversionpkt; /* old version packets received */
+ U_LONG newversionpkt; /* new version packets received */
+ U_LONG unknownversion; /* don't know version packets */
+ U_LONG badlength; /* packets with bad length */
+ U_LONG processed; /* packets processed */
+ U_LONG badauth; /* packets dropped because of authorization */
+ U_LONG wanderhold;
+ };
+
+
+ /*
* Peer memory statistics. Collected in the peer module.
*/
struct info_mem_stats {
***************
*** 546,551 ****
--- 564,570 ----
struct info_monitor {
U_LONG lasttime; /* last packet from this host */
U_LONG firsttime; /* first time we received a packet */
+ U_LONG lastdrop; /* last time we rejected a packet due to client limitation policy */
U_LONG count; /* count of packets received */
U_LONG addr; /* host address */
u_short port; /* port number of last reception */
***************
*** 553,558 ****
--- 572,589 ----
u_char version; /* version number of last packet */
};
+ /*
+ * Structure used for returning monitor data (old format
+ */
+ struct old_info_monitor {
+ U_LONG lasttime; /* last packet from this host */
+ U_LONG firsttime; /* first time we received a packet */
+ U_LONG count; /* count of packets received */
+ U_LONG addr; /* host address */
+ u_short port; /* port number of last reception */
+ u_char mode; /* mode of last packet */
+ u_char version; /* version number of last packet */
+ };
/*
* Structure used for passing indication of flags to clear
diff -c include/ntp_stdlib.h:1.1.1.7 include/ntp_stdlib.h:1.2
*** include/ntp_stdlib.h:1.1.1.7 Wed Feb 2 18:11:31 1994
--- include/ntp_stdlib.h Wed Feb 2 18:11:31 1994
***************
*** 79,84 ****
--- 79,85 ----
extern char * mfptoa P((U_LONG, U_LONG, int));
extern char * mfptoms P((U_LONG, U_LONG, int));
extern char * modetoa P((int));
+ extern U_LONG netof P((U_LONG));
extern char * numtoa P((U_LONG));
extern char * numtohost P((U_LONG));
extern int octtoint P((const char *, U_LONG *));
diff -c include/ntpd.h:1.1.1.7 include/ntpd.h:1.6
*** include/ntpd.h:1.1.1.7 Wed Feb 2 18:11:38 1994
--- include/ntpd.h Wed Feb 2 18:11:38 1994
***************
*** 93,100 ****
/* ntp_monitor.c */
extern void init_mon P((void));
! extern void mon_start P((void));
! extern void mon_stop P((void));
extern void monitor P((struct recvbuf *));
/* ntp_peer.c */
--- 93,100 ----
/* ntp_monitor.c */
extern void init_mon P((void));
! extern void mon_start P((int));
! extern void mon_stop P((int));
extern void monitor P((struct recvbuf *));
/* ntp_peer.c */
diff -c lib/Makefile.tmpl:1.1.1.14 lib/Makefile.tmpl:3.25
*** lib/Makefile.tmpl:1.1.1.14 Wed Feb 2 18:12:06 1994
--- lib/Makefile.tmpl Wed Feb 2 18:12:07 1994
***************
*** 31,37 ****
uglydate.c uinttoa.c utvtoa.c machines.c clocktypes.c \
md5.c a_md5encrypt.c a_md5decrypt.c \
a_md512crypt.c decodenetnum.c systime.c msyslog.c syssignal.c \
! findconfig.c
OBJS= atoint.o atolfp.o atouint.o auth12crypt.o authdecrypt.o authdes.o \
authencrypt.o authkeys.o authparity.o authreadkeys.o authusekey.o \
--- 31,37 ----
uglydate.c uinttoa.c utvtoa.c machines.c clocktypes.c \
md5.c a_md5encrypt.c a_md5decrypt.c \
a_md512crypt.c decodenetnum.c systime.c msyslog.c syssignal.c \
! findconfig.c netof.c
OBJS= atoint.o atolfp.o atouint.o auth12crypt.o authdecrypt.o authdes.o \
authencrypt.o authkeys.o authparity.o authreadkeys.o authusekey.o \
***************
*** 44,50 ****
uglydate.o uinttoa.o utvtoa.o machines.o clocktypes.o \
md5.o a_md5encrypt.o a_md5decrypt.o \
a_md512crypt.o decodenetnum.o systime.o msyslog.o syssignal.o \
! findconfig.o
$(LIBNAME).a: $(OBJS)
ar rv $@ $?
--- 44,50 ----
uglydate.o uinttoa.o utvtoa.o machines.o clocktypes.o \
md5.o a_md5encrypt.o a_md5decrypt.o \
a_md512crypt.o decodenetnum.o systime.o msyslog.o syssignal.o \
! findconfig.o netof.o
$(LIBNAME).a: $(OBJS)
ar rv $@ $?
diff -c /dev/null lib/netof.c:3.1
*** /dev/null Wed Feb 2 18:13:07 1994
--- lib/netof.c Wed Feb 2 18:13:07 1994
***************
*** 0 ****
--- 1,25 ----
+ /*
+ * netof - return the net address part of an ip address
+ * (zero out host part)
+ */
+ #include <stdio.h>
+
+ #include "ntp_fp.h"
+ #include "ntp_stdlib.h"
+
+ U_LONG
+ netof(num)
+ U_LONG num;
+ {
+ register U_LONG netnum;
+
+ netnum = num;
+
+ if(IN_CLASSC(netnum))
+ netnum &= IN_CLASSC_NET;
+ else if (IN_CLASSB(netnum))
+ netnum &= IN_CLASSB_NET;
+ else /* treat als other like class A */
+ netnum &= IN_CLASSA_NET;
+ return netnum;
+ }
diff -c /dev/null parse/README.new_clocks:3.2
*** /dev/null Wed Feb 2 18:14:30 1994
--- parse/README.new_clocks Wed Feb 2 18:14:30 1994
***************
*** 0 ****
--- 1,203 ----
+ Here is an attempt to scetch out what you need to do in order to
+ add another clock to the parse driver:
+
+ Prerequsites:
+ - Does the system you want the clock connect to have
+ termio.h or termios.h ? (You need that for the parse driver)
+
+ What to do:
+
+ Make a conversion module (parse/clk_*.c)
+
+ - What ist the time code format ?
+ - find year, month, day, hour, minute, second, status (synchronised or
+ not), possibly time zone information (you need to give the offset to UTC)
+ You will have to convert the data from a string into a struct clocktime:
+ struct clocktime /* clock time broken up from time code */
+ {
+ LONG day;
+ LONG month;
+ LONG year;
+ LONG hour;
+ LONG minute;
+ LONG second;
+ LONG usecond;
+ LONG utcoffset; /* in seconds */
+ LONG flags; /* current clock status */
+ };
+
+ Conversion is usually simple and straight forward. For the flags following
+ values can be OR'ed together:
+
+ PARSEB_ANNOUNCE switch time zone warning (informational only)
+ PARSEB_POWERUP no synchronisation - clock confused (must set then)
+ PARSEB_NOSYNC timecode currently not confirmed (must set then)
+ usually on reception error when the is still a
+ chance the the generated time is still ok.
+
+ PARSEB_DST DST in effect (informational only)
+ PARSEB_UTC timecode contains UTC time (informational only)
+ PARSEB_LEAP LEAP warning (prior to leap happening - must set when imminent)
+ PARSEB_ALTERNATE backup transmitter (informational only)
+ PARSEB_POSITION geographic position available (informational only)
+ PARSEB_LEAPSECOND actual leap second (this time code is the leap
+ second - informational only)
+
+ These are feature flags denoting items that are supported by the clock:
+ PARSEB_S_LEAP supports LEAP - might set PARSEB_LEAP
+ PARSEB_S_ANTENNA supports ANTENNA - might set PARSEB_ALTERNATE
+ PARSEB_S_PPS supports PPS time stamping
+ PARSEB_S_POSITION supports position information (GPS)
+
+ Conversion is done in the cvt_* routine in parse/clk_*.c files. look in
+ them for examples. The basic structure is:
+
+ struct clockformat <yourclock>_format = {
+ lots of field for you to fill out (see below)
+ };
+
+ static cvt_<yourclock>()
+ ...
+ {
+ if (<I do not recognize my time code>) {
+ return CVT_NONE;
+ } else {
+ if (<conversion into clockformat is ok>) {
+ <set all necessary flags>;
+ return CVT_OK;
+ } else {
+ return CVT_FAIL|CVT_BADFMT;
+ }
+ }
+
+ The struct clockformat is the interface to the rest of the parse
+ driver - it holds all information necessary for finding the
+ clock message and doing the appropriate time stamping.
+
+ struct clockformat
+ {
+ unsigned LONG (*convert)();
+ /* conversion routine - your routine - cvt_<yourclock> */
+ void (*syncevt)();
+ /* routine for handling RS232 sync events (time stamps) - usually sync_simple */
+ unsigned LONG (*syncpps)();
+ /* PPS input routine - usually pps_simple */
+ unsigned LONG (*synth)();
+ /* time code synthesizer - usually not used - (LONG (*)())0 */
+ void *data;
+ /* local parameters - any parameters/data/configuration info your conversion
+ routine might need */
+ char *name;
+ /* clock format name - Name of the time code */
+ unsigned short length;
+ /* maximum length of data packet for your clock format */
+ unsigned LONG flags;
+ /* information for the parser what to look for */
+ struct timeval timeout;
+ /* buffer restart after timeout (us) - some clocks preceede new data by
+ a longer period of silence - unsually not used */
+ unsigned char startsym;
+ /* start symbol - character at the beginning of the clock data */
+ unsigned char endsym;
+ /* end symbol - character at the end of the clock data */
+ unsigned char syncsym;
+ /* sync symbol - character that is "on time" - where the time stamp should be taken */
+ };
+
+ The flags:
+ F_START use startsym to find the beginning of the clock data
+ F_END use endsym to find the end of the clock data
+ SYNC_TIMEOUT packet restart after timeout in timeout field
+ SYNC_START packet start is sync event (time stamp at paket start)
+ SYNC_END packet end is sync event (time stamp at paket end)
+ SYNC_CHAR special character (syncsym) is sync event
+ SYNC_ONE PPS synchronize on 'ONE' transition
+ SYNC_ZERO PPS synchronize on 'ZERO' transition
+ SYNC_SYNTHESIZE generate intermediate time stamps (very special case!)
+ CVT_FIXEDONLY convert only in fixed configuration - (data format not
+ suitable for auto-configuration)
+
+
+ The above should have given you some hints on how to build a clk_*.c
+ file with the time code conversion. See the examples and pick a clock
+ closest to yours and tweak the code to match your clock.
+
+ In order to make your clk_*.c file usable a referenc to the clockformat
+ structure must be put into parse_conf.c.
+
+
+
+ TTY setup and initialisation/configuration will be done in
+ xntpd/refclock_parse.c
+
+ - Find out the exact tty settings for your clock (baud rate, parity,
+ stop bits, character size, ...) and note them in terms of
+ termio*.h c_cflag macros.
+
+ - in xntpd/refclock_parse.c fill out a new the struct clockinfo element
+ (allocates a new "IP" address - see comments)
+ (see all the other clocks for example)
+ struct clockinfo
+ {
+ U_LONG cl_flags; /* operation flags (io modes) */
+ PARSE_F_NOPOLLONLY always do async io - read whenever input comes
+ PARSE_F_POLLONLY never do async io - only read when expecting data
+ PARSE_F_PPSPPS use loopfilter PPS code (CIOGETEV)
+ PARSE_F_PPSONSECOND PPS pulses are on second
+ usually flags stay 0 as they are used only for special setups
+
+ void (*cl_poll)(); /* active poll routine */
+ The routine to call when the clock needs data sent to it in order to
+ get a time code from the clock (e.g. Trimble clock)
+ int (*cl_init)(); /* active poll init routine */
+ The routine to call for very special initializations.
+ void (*cl_end)(); /* active poll end routine */
+ The routine to call to undo any special initialisation (free memory/timers)
+ void *cl_data; /* local data area for "poll" mechanism */
+ local data for polling routines
+ u_fp cl_rootdelay; /* rootdelay */
+ NTP rottdelay estimate (usually 0)
+ U_LONG cl_basedelay; /* current offset - unsigned l_fp fractional par
+ time (fraction) by which the RS232 time code is delayed from the actual time.
+ t */
+ U_LONG cl_ppsdelay; /* current PPS offset - unsigned l_fp fractional
+ time (fraction) by which the PPS time stamp is delayed (usually 0)
+ part */
+ char *cl_id; /* ID code (usually "DCF") */
+ Refclock id - (max 4 chars)
+ char *cl_description; /* device name */
+ Name of this device.
+ char *cl_format; /* fixed format */
+ If the data format cann not ne detected automatically this is the name
+ as in clk_*.c clockformat.
+ u_char cl_type; /* clock type (ntp control) */
+ Type if clock as in clock status word (ntp control messages) - usually 0
+ U_LONG cl_maxunsync; /* time to trust oscillator after loosing synch
+ */
+ seconds a clock can be trusted after loosing synchronisation.
+
+ U_LONG cl_cflag; /* terminal io flags */
+ U_LONG cl_iflag; /* terminal io flags */
+ U_LONG cl_oflag; /* terminal io flags */
+ U_LONG cl_lflag; /* terminal io flags */
+ termio*.h tty modes.
+ } clockinfo[] = {
+ ...,<other clocks>,...
+ { < your parameters> },
+ };
+
+
+ Well, this is very sketchy, i know. But I hope it helps a little bit.
+ The best way is to look which clock comes closet to your and tweak that
+ code.
+ Two sorts of clocks are used with parse. Clocks that automatically sent
+ thier time code (once a second) do not nee entries in the poll routines because
+ they sent the data all the time. The second sort are the clocks that need a
+ command sent to then in order to reply with a time code (like the Trimble
+ clock).
+
+ For questions: kardel@informatik.uni-erlangen.de. Please include
+ an exact description on how your clock works. (initialisation,
+ TTY modes, strings to be sent to it, responses received from the clock).
+
+ Frank Kardel
diff -c /dev/null parse/README.parse_clocks:3.1
*** /dev/null Wed Feb 2 18:14:33 1994
--- parse/README.parse_clocks Wed Feb 2 18:14:33 1994
***************
*** 0 ****
--- 1,263 ----
+ The parse driver currently supports several clock with different
+ query mechanisms. In order for you to find a sample that might be
+ similar to a clock you might want to integrate into parse i'll sum
+ up the major features of the clocks (this information is distributed
+ in the parse/clk_*.c and xntpd/refclock_parse.c files).
+
+ ---
+ Meinberg: 127.127.8. 0- 3 (PZF535TCXO)
+ 127.127.8. 4- 7 (PZF535OCXO)
+ 127.127.8. 8-11 (DCFUA31)
+ 127.127.8.28-31 (GPS166)
+ Meinberg: start=<STX>, end=<ETX>, sync on start
+ pattern="\2D: . . ;T: ;U: . . ; \3"
+ pattern="\2 . . ; ; : : ; \3"
+ pattern="\2 . . ; ; : : ; : ; ; . . "
+
+ Meinberg is a german manufacturer of time code receivers. Those clocks
+ have a pretty common output format in the stock version. In order to
+ support NTP Meinberg was so kind to produce some special versions of
+ the firmware for the use with NTP. So, if you are going to use a
+ Meinberg clock please ask whether there is a special Uni Erlangen
+ version.
+
+ General characteristics:
+ Meinberg clocks primarily output pulse per second and a describing
+ ASCII string. This string can be produced in two modes. either upon
+ the reception of a question mark or every second. NTP uses the latter
+ mechanism. The DCF77 variants have a pretty good relationship between
+ RS232 time code and the PPS signal while the GPS receiver has no fixed
+ timeing between the datagram and the pulse (you need to use PPS with
+ GPS!) on DCF77 you might get away without the PPS signal.
+
+ The preferred tty setting for Meinberg is:
+ CFLAG (B9600|CS7|PARENB|CREAD|HUPCL)
+ IFLAG (IGNBRK|IGNPAR|ISTRIP)
+ OFLAG 0
+ LFLAG 0
+
+ The clock is run at datagram once per second.
+ Stock dataformat is:
+
+ <STX>D:<dd>.<mm>.<yy>;T:<w>;U:<hh>:<mm>:<ss>;<S><F><D><A><ETX>
+ pos: 0 00 00 0 00 0 11 111 1 111 12 2 22 2 22 2 2 2 3 3 3
+ 1 23 45 6 78 9 01 234 5 678 90 1 23 4 56 7 8 9 0 1 2
+
+ <STX> = '\002' ASCII start of text
+ <ETX> = '\003' ASCII end of text
+ <dd>,<mm>,<yy> = day, month, year(2 digits!!)
+ <w> = day of week (sunday= 0)
+ <hh>,<mm>,<ss> = hour, minute, second
+ <S> = '#' if never synced since powerup else ' ' for DCF U/A 31
+ '#' if not PZF sychronisation available else ' ' for PZF 535
+ <F> = '*' if time comes from internal quartz else ' '
+ <D> = 'S' if daylight saving time is active else ' '
+ <A> = '!' during the hour preceeding an daylight saving time
+ start/end change
+
+ For the university of Erlangen a special format was implemented to support
+ LEAP announcement and anouncement of alternate antenna.
+
+ Version for UNI-ERLANGEN Software is: PZFUERL V4.6 (Meinberg)
+
+ The use of this software release (or higher) is *ABSOLUTELY*
+ recommended (ask for PZFUERL version as some minor HW fixes have
+ been introduced) due to the LEAP second support and UTC indication.
+ The standard timecode does not indicate when the timecode is in
+ UTC (by front panel configuration) thus we have no chance to find
+ the correct utc offset. For the standard format do not ever use
+ UTC display as this is not detectable in the time code !!!
+
+ <STX><dd>.<mm>.<yy>; <w>; <hh>:<mm>:<ss>; <U><S><F><D><A><L><R><ETX>
+ pos: 0 00 0 00 0 00 11 1 11 11 1 11 2 22 22 2 2 2 2 2 3 3 3
+ 1 23 4 56 7 89 01 2 34 56 7 89 0 12 34 5 6 7 8 9 0 1 2
+ <STX> = '\002' ASCII start of text
+ <ETX> = '\003' ASCII end of text
+ <dd>,<mm>,<yy> = day, month, year(2 digits!!)
+ <w> = day of week (sunday= 0)
+ <hh>,<mm>,<ss> = hour, minute, second
+ <U> = 'U' UTC time display
+ <S> = '#' if never synced since powerup else ' ' for DCF U/A 31
+ '#' if not PZF sychronisation available else ' ' for PZF 535
+ <F> = '*' if time comes from internal quartz else ' '
+ <D> = 'S' if daylight saving time is active else ' '
+ <A> = '!' during the hour preceeding an daylight saving time
+ start/end change
+ <L> = 'A' LEAP second announcement
+ <R> = 'R' alternate antenna
+
+ Meinberg GPS166 receiver
+
+ You must get the Uni-Erlangen firmware for the GPS receiver support
+ to work to full satisfaction !
+
+ <STX><dd>.<mm>.<yy>; <w>; <hh>:<mm>:<ss>; <+/-><00:00>; <U><S><F><D><A><L><R><L>; <position...><ETX>
+ *
+ 000000000111111111122222222223333333333444444444455555555556666666
+ 123456789012345678901234567890123456789012345678901234567890123456
+ \x0209.07.93; 5; 08:48:26; +00:00; ; 49.5736N 11.0280E 373m\x03
+ *
+
+ <STX> = '\002' ASCII start of text
+ <ETX> = '\003' ASCII end of text
+ <dd>,<mm>,<yy> = day, month, year(2 digits!!)
+ <w> = day of week (sunday= 0)
+ <hh>,<mm>,<ss> = hour, minute, second
+ <+/->,<00:00> = offset to UTC
+ <S> = '#' if never synced since powerup else ' ' for DCF U/A 31
+ '#' if not PZF sychronisation available else ' ' for PZF 535
+ <U> = 'U' UTC time display
+ <F> = '*' if time comes from internal quartz else ' '
+ <D> = 'S' if daylight saving time is active else ' '
+ <A> = '!' during the hour preceeding an daylight saving time
+ start/end change
+ <L> = 'A' LEAP second announcement
+ <R> = 'R' alternate antenna (reminiscent of PZF535) usually ' '
+ <L> = 'L' on 23:59:60
+
+
+ For the Meinberg parse look into clock_meinberg.c
+
+ ---
+ RAWDCF: 127.127.8.20-23 (Conrad receiver module - delay 210ms)
+ 127.127.8.24-27 (FAU receiver - delay 258ms)
+ RAWDCF: end=TIMEOUT>1.5s, sync each char (any char),generate psuedo time
+ codes, fixed format
+
+ direct DCF77 code input
+ In Europe it is relatively easy/cheap the receive the german time code
+ transmitter DCF77. The simplest version to process its signal is to
+ feed the 100/200ms pulse of the demodulated AM signal via a level
+ converter to an RS232 port at 50Baud. parse/clk_rawdcf.c holds all
+ necessary decoding logic for the time code which is transmitted each
+ minute for one minute. A bit of the time code is sent once a second.
+
+ The preferred tty setting is:
+ CFLAG (B50|CS8|CREAD|CLOCAL)
+ IFLAG 0
+ OFLAG 0
+ LFLAG 0
+
+ DCF77 raw time code
+
+ From "Zur Zeit", Physikalisch-Technische Bundesanstalt (PTB), Braunschweig
+ und Berlin, Maerz 1989
+
+ Timecode transmission:
+ AM:
+ time marks are send every second except for the second before the
+ next minute mark
+ time marks consist of a reduction of transmitter power to 25%
+ of the nominal level
+ the falling edge is the time indication (on time)
+ time marks of a 100ms duration constitute a logical 0
+ time marks of a 200ms duration constitute a logical 1
+ FM:
+ see the spec. (basically a (non-)inverted psuedo random phase shift)
+
+ Encoding:
+ Second Contents
+ 0 - 10 AM: free, FM: 0
+ 11 - 14 free
+ 15 R - alternate antenna
+ 16 A1 - expect zone change (1 hour before)
+ 17 - 18 Z1,Z2 - time zone
+ 0 0 illegal
+ 0 1 MEZ (MET)
+ 1 0 MESZ (MED, MET DST)
+ 1 1 illegal
+ 19 A2 - expect leap insertion/deletion (1 hour before)
+ 20 S - start of time code (1)
+ 21 - 24 M1 - BCD (lsb first) Minutes
+ 25 - 27 M10 - BCD (lsb first) 10 Minutes
+ 28 P1 - Minute Parity (even)
+ 29 - 32 H1 - BCD (lsb first) Hours
+ 33 - 34 H10 - BCD (lsb first) 10 Hours
+ 35 P2 - Hour Parity (even)
+ 36 - 39 D1 - BCD (lsb first) Days
+ 40 - 41 D10 - BCD (lsb first) 10 Days
+ 42 - 44 DW - BCD (lsb first) day of week (1: Monday -> 7: Sunday)
+ 45 - 49 MO - BCD (lsb first) Month
+ 50 MO0 - 10 Months
+ 51 - 53 Y1 - BCD (lsb first) Years
+ 54 - 57 Y10 - BCD (lsb first) 10 Years
+ 58 P3 - Date Parity (even)
+ 59 - usually missing (minute indication), except for leap insertion
+
+ ---
+ Schmid clock: 127.127.8.16-19
+ Schmid clock: needs poll, binary input, end='\xFC', sync start
+
+ The Schmid clock is a DCF77 receiver that sends a binary
+ time code at the reception of a flag byte. The contents
+ if the flag byte determined the time code format. The
+ binary time code is delimited by the byte 0xFC.
+
+ TTY setup is:
+ CFLAG (B1200|CS8|CREAD|CLOCAL)
+ IFLAG 0
+ OFLAG 0
+ LFLAG 0
+
+ The command to Schmid's DCF77 clock is a single byte; each bit
+ allows the user to select some part of the time string, as follows (the
+ output for the lsb is sent first).
+
+ Bit 0: time in MEZ, 4 bytes *binary, not BCD*; hh.mm.ss.tenths
+ Bit 1: date 3 bytes *binary, not BCD: dd.mm.yy
+ Bit 2: week day, 1 byte (unused here)
+ Bit 3: time zone, 1 byte, 0=MET, 1=MEST. (unused here)
+ Bit 4: clock status, 1 byte, 0=time invalid,
+ 1=time from crystal backup,
+ 3=time from DCF77
+ Bit 5: transmitter status, 1 byte,
+ bit 0: backup antenna
+ bit 1: time zone change within 1h
+ bit 3,2: TZ 01=MEST, 10=MET
+ bit 4: leap second will be
+ added within one hour
+ bits 5-7: Zero
+ Bit 6: time in backup mode, units of 5 minutes (unused here)
+
+
+ ---
+ Trimble SV6: 127.127.8.32-35
+ Trimble SV6: needs poll, ascii timecode, start='>', end='<',
+ query='>QTM<', eol='<'
+
+ Trimble SV6 is a GPS receiver with PPS output. It needs to be polled.
+ It also need a special tty mode setup (EOL='<').
+
+ TTY setup is:
+ CFLAG (B4800|CS8|CREAD)
+ IFLAG (BRKINT|IGNPAR|ISTRIP|ICRNL|IXON)
+ OFLAG (OPOST|ONLCR)
+ LFLAG (ICANON|ECHOK)
+
+ Special flags are:
+ PARSE_F_PPSPPS - use CIOGETEV for PPS time stamping
+ PARSE_F_PPSONSECOND - the time code is not related to
+ the PPS pulse (so use the time code
+ only for the second epoch)
+
+ Timecode
+ 0000000000111111111122222222223333333 / char
+ 0123456789012345678901234567890123456 \ posn
+ >RTMhhmmssdddDDMMYYYYoodnnvrrrrr;*xx< Actual
+ ----33445566600112222BB7__-_____--99- Parse
+ >RTM 1 ;* <", Check
+
+ ---
+ ELV DCF7000: 127.127.8.12-15
+ ELV DCF7000: end='\r', pattern=" - - - - - - - \r"
+
+ The ELV DCF7000 is a cheap DCF77 receiver sending each second
+ a time code (though not very precise!) delimited by '`r'
+
+ Timecode
+ YY-MM-DD-HH-MM-SS-FF\r
+
+ FF&0x1 - DST
+ FF&0x2 - DST switch warning
+ FF&0x4 - unsynchronised
+
diff -c parse/parsesolaris.c:1.1.1.5 parse/parsesolaris.c:3.11
*** parse/parsesolaris.c:1.1.1.5 Wed Feb 2 18:14:49 1994
--- parse/parsesolaris.c Wed Feb 2 18:14:49 1994
***************
*** 65,71 ****
{
"parse", /* module name */
&parseinfo, /* module information */
! 0, /* not clean yet */
/* lock ptr */
};
--- 65,71 ----
{
"parse", /* module name */
&parseinfo, /* module information */
! D_NEW, /* not clean yet */
/* lock ptr */
};
diff -c scripts/support/bin/monl:1.1.1.1 scripts/support/bin/monl:1.2
*** scripts/support/bin/monl:1.1.1.1 Wed Feb 2 18:16:01 1994
--- scripts/support/bin/monl Wed Feb 2 18:16:01 1994
***************
*** 143,149 ****
{
chop;
split;
! ($host, $count, $mode, $version, $lasttime, $firsttime) = (@_[$[, $[+2 .. $[+6]);
$Seen{$host, $mode} = 1;
--- 143,150 ----
{
chop;
split;
! ($host, $count, $mode, $version, $lasttime, $firsttime) =
! (@_[$[, $[+2 .. $[+4, $#_-1,$#_]);
$Seen{$host, $mode} = 1;
diff -c util/tickadj.c:1.1.1.16 util/tickadj.c:3.17
*** util/tickadj.c:1.1.1.16 Wed Feb 2 18:16:23 1994
--- util/tickadj.c Wed Feb 2 18:16:23 1994
***************
*** 1,4 ****
! /* tickadj.c,v 3.1 1993/07/06 01:11:05 jbj Exp
* tickadj - read, and possibly modify, the kernel `tick' and
* `tickadj' variables, as well as `dosynctodr'. Note that
* this operates on the running kernel only. I'd like to be
--- 1,4 ----
! /*
* tickadj - read, and possibly modify, the kernel `tick' and
* `tickadj' variables, as well as `dosynctodr'. Note that
* this operates on the running kernel only. I'd like to be
***************
*** 6,11 ****
--- 6,46 ----
* mastered this yet.
*/
#include <stdio.h>
+
+ #ifdef SYS_LINUX
+ #include <sys/timex.h>
+
+ struct timex txc;
+
+ int
+ main(int argc, char ** argv)
+ {
+ if (argc > 2)
+ {
+ fprintf(stderr, "Usage: %s [tick_value]\n", argv[0]);
+ exit(-1);
+ }
+ else if (argc == 2)
+ {
+ if ( (txc.tick = atoi(argv[1])) < 1 )
+ {
+ fprintf(stderr, "Silly value for tick: %s\n", argv[1]);
+ exit(-1);
+ }
+ txc.mode = ADJ_TICK;
+ }
+ else
+ txc.mode = 0;
+
+ if (__adjtimex(&txc) < 0)
+ perror("adjtimex");
+ else
+ printf("tick = %d\n", txc.tick);
+
+ return(0);
+ }
+ #else /* not Linux... kmem tweaking: */
+
#include <sys/types.h>
#include <sys/file.h>
#include <sys/stat.h>
***************
*** 513,515 ****
--- 548,551 ----
exit(1);
}
}
+ #endif /* not Linux */
diff -c xntpd/ntp_config.c:1.1.1.19 xntpd/ntp_config.c:3.24
*** xntpd/ntp_config.c:1.1.1.19 Wed Feb 2 18:16:36 1994
--- xntpd/ntp_config.c Wed Feb 2 18:16:37 1994
***************
*** 58,63 ****
--- 58,64 ----
* statsdir /var/NTP/
* filegen peerstats [ file peerstats ] [ type day ] [ link ]
* resolver /path/progname
+ * netlimit integer
*
* And then some. See the manual page.
*/
***************
*** 94,99 ****
--- 95,102 ----
#define CONFIG_PIDFILE 25
#define CONFIG_LOGFILE 26
#define CONFIG_SETVAR 27
+ #define CONFIG_CLIENTLIMIT 28
+ #define CONFIG_CLIENTPERIOD 29
#define CONF_MOD_VERSION 1
#define CONF_MOD_KEY 2
***************
*** 114,119 ****
--- 117,123 ----
#define CONF_RES_NOTRAP 8
#define CONF_RES_LPTRAP 9
#define CONF_RES_NTPPORT 10
+ #define CONF_RES_LIMITED 11
#define CONF_TRAP_PORT 1
#define CONF_TRAP_INTERFACE 2
***************
*** 179,184 ****
--- 183,190 ----
{ "pidfile", CONFIG_PIDFILE },
{ "logfile", CONFIG_LOGFILE },
{ "setvar", CONFIG_SETVAR },
+ { "clientlimit", CONFIG_CLIENTLIMIT },
+ { "clientperiod", CONFIG_CLIENTPERIOD },
{ "", CONFIG_UNKNOWN }
};
***************
*** 217,222 ****
--- 223,229 ----
{ "notrap", CONF_RES_NOTRAP },
{ "lowpriotrap", CONF_RES_LPTRAP },
{ "ntpport", CONF_RES_NTPPORT },
+ { "limited", CONF_RES_LIMITED },
{ "", CONFIG_UNKNOWN }
};
***************
*** 817,825 ****
errflg = 0;
if (ntokens >= 2) {
if (STREQ(tokens[1], "yes"))
! mon_start();
else if (STREQ(tokens[1], "no"))
! mon_stop();
else
errflg++;
} else {
--- 824,832 ----
errflg = 0;
if (ntokens >= 2) {
if (STREQ(tokens[1], "yes"))
! mon_start(MON_ON);
else if (STREQ(tokens[1], "no"))
! mon_stop(MON_ON);
else
errflg++;
} else {
***************
*** 965,970 ****
--- 972,981 ----
peerkey |= RESM_NTPONLY;
break;
+ case CONF_RES_LIMITED:
+ peerversion |= RES_LIMITED;
+ break;
+
case CONFIG_UNKNOWN:
errflg++;
break;
***************
*** 1413,1418 ****
--- 1424,1483 ----
set_sys_var(tokens[1], strlen(tokens[1])+1, RW |
((((ntokens > 2) && !strcmp(tokens[2], "default"))) ? DEF : 0));
}
+ break;
+
+ case CONFIG_CLIENTLIMIT:
+ if (ntokens < 2)
+ {
+ syslog(LOG_ERR,
+ "no value for clientlimit command - line ignored");
+ }
+ else
+ {
+ U_LONG i;
+ if (!atouint(tokens[1], &i) || !i)
+ {
+ syslog(LOG_ERR,
+ "illegal value for clientlimit command - line ignored");
+ }
+ else
+ {
+ extern U_LONG client_limit;
+ char bp[80];
+
+ sprintf(bp, "client_limit=%d", i);
+ set_sys_var(bp, strlen(bp)+1, RO);
+
+ client_limit = i;
+ }
+ }
+ break;
+
+ case CONFIG_CLIENTPERIOD:
+ if (ntokens < 2)
+ {
+ syslog(LOG_ERR,
+ "no value for clientperiod command - line ignored");
+ }
+ else
+ {
+ U_LONG i;
+ if (!atouint(tokens[1], &i) || i < 64)
+ {
+ syslog(LOG_ERR,
+ "illegal value for clientperiod command - line ignored");
+ }
+ else
+ {
+ extern U_LONG client_limit_period;
+ char bp[80];
+
+ sprintf(bp, "client_limit_period=%d", i);
+ set_sys_var(bp, strlen(bp)+1, RO);
+
+ client_limit_period = i;
+ }
+ }
break;
}
}
diff -c xntpd/ntp_monitor.c:1.1.1.10 xntpd/ntp_monitor.c:3.9
*** xntpd/ntp_monitor.c:1.1.1.10 Wed Feb 2 18:16:48 1994
--- xntpd/ntp_monitor.c Wed Feb 2 18:16:48 1994
***************
*** 58,64 ****
static struct mon_data *mon_hash; /* Pointer to array of hash buckets */
static int *mon_hash_count; /* Point to hash count stats keeper */
struct mon_data mon_mru_list;
!
/*
* List of free structures structures, and counters of free and total
* structures. The free structures are linked with the hash_next field.
--- 58,64 ----
static struct mon_data *mon_hash; /* Pointer to array of hash buckets */
static int *mon_hash_count; /* Point to hash count stats keeper */
struct mon_data mon_mru_list;
! struct mon_data mon_fifo_list;
/*
* List of free structures structures, and counters of free and total
* structures. The free structures are linked with the hash_next field.
***************
*** 93,99 ****
* Don't do much of anything here. We don't allocate memory
* until someone explicitly starts us.
*/
! mon_enabled = 0;
mon_have_memory = 0;
mon_free_mem = 0;
--- 93,99 ----
* Don't do much of anything here. We don't allocate memory
* until someone explicitly starts us.
*/
! mon_enabled = MON_OFF;
mon_have_memory = 0;
mon_free_mem = 0;
***************
*** 103,108 ****
--- 103,109 ----
mon_hash = 0;
mon_hash_count = 0;
memset((char *)&mon_mru_list, 0, sizeof mon_mru_list);
+ memset((char *)&mon_fifo_list, 0, sizeof mon_fifo_list);
}
***************
*** 110,122 ****
* mon_start - start up the monitoring software
*/
void
! mon_start()
{
register struct mon_data *md;
register int i;
! if (mon_enabled)
return;
if (!mon_have_memory) {
mon_hash = (struct mon_data *)
--- 111,128 ----
* mon_start - start up the monitoring software
*/
void
! mon_start(mode)
! int mode;
{
register struct mon_data *md;
register int i;
! if (mon_enabled != MON_OFF) {
! mon_enabled |= mode;
return;
+ }
+ if (mode == MON_OFF)
+ return; /* Ooops.. */
if (!mon_have_memory) {
mon_hash = (struct mon_data *)
***************
*** 142,148 ****
mon_mru_list.mru_next = &mon_mru_list;
mon_mru_list.mru_prev = &mon_mru_list;
! mon_enabled = 1;
}
--- 148,157 ----
mon_mru_list.mru_next = &mon_mru_list;
mon_mru_list.mru_prev = &mon_mru_list;
! mon_fifo_list.fifo_next = &mon_fifo_list;
! mon_fifo_list.fifo_prev = &mon_fifo_list;
!
! mon_enabled = mode;
}
***************
*** 150,161 ****
* mon_stop - stop the monitoring software
*/
void
! mon_stop()
{
register struct mon_data *md;
register int i;
! if (!mon_enabled)
return;
/*
--- 159,177 ----
* mon_stop - stop the monitoring software
*/
void
! mon_stop(mode)
! int mode;
{
register struct mon_data *md;
register int i;
! if (mon_enabled == MON_OFF)
! return;
! if ((mon_enabled & mode) == 0 || mode == MON_OFF)
! return;
!
! mon_enabled &= ~mode;
! if (mon_enabled != MON_OFF)
return;
/*
***************
*** 176,182 ****
mon_mru_list.mru_next = &mon_mru_list;
mon_mru_list.mru_prev = &mon_mru_list;
! mon_enabled = 0;
}
--- 192,199 ----
mon_mru_list.mru_next = &mon_mru_list;
mon_mru_list.mru_prev = &mon_mru_list;
! mon_fifo_list.fifo_next = &mon_fifo_list;
! mon_fifo_list.fifo_prev = &mon_fifo_list;
}
***************
*** 194,200 ****
register int mode;
register struct mon_data *mdhash;
! if (!mon_enabled)
return;
pkt = &rbufp->recv_pkt;
--- 211,217 ----
register int mode;
register struct mon_data *mdhash;
! if (mon_enabled == MON_OFF)
return;
pkt = &rbufp->recv_pkt;
***************
*** 220,225 ****
--- 237,243 ----
md->mru_prev = &mon_mru_list;
mon_mru_list.mru_next->mru_prev = md;
mon_mru_list.mru_next = md;
+
return;
}
md = md->hash_next;
***************
*** 240,245 ****
--- 258,269 ----
md->hash_next->hash_prev = md->hash_prev;
md->hash_prev->hash_next = md->hash_next;
*(mon_hash_count + MON_HASH(md->rmtadr)) -= 1;
+ /*
+ * Get it from FIFO list
+ */
+ md->fifo_prev->fifo_next = md->fifo_next;
+ md->fifo_next->fifo_prev = md->fifo_prev;
+
} else {
if (mon_free_mem == 0)
mon_getmoremem();
***************
*** 252,257 ****
--- 276,282 ----
* Got one, initialize it
*/
md->lasttime = md->firsttime = current_time;
+ md->lastdrop = 0;
md->count = 1;
md->rmtadr = netnum;
md->rmtport = NSRCPORT(&rbufp->recv_srcadr);
***************
*** 260,266 ****
/*
* Shuffle him into the hash table, inserting him at the
! * end. Also put him on top of the MRU list.
*/
mdhash = mon_hash + MON_HASH(netnum);
md->hash_next = mdhash;
--- 285,292 ----
/*
* Shuffle him into the hash table, inserting him at the
! * end. Also put him on top of the MRU list
! * and at bottom of FIFO list
*/
mdhash = mon_hash + MON_HASH(netnum);
md->hash_next = mdhash;
***************
*** 273,278 ****
--- 299,309 ----
md->mru_prev = &mon_mru_list;
mon_mru_list.mru_next->mru_prev = md;
mon_mru_list.mru_next = md;
+
+ md->fifo_prev = mon_fifo_list.fifo_prev;
+ md->fifo_next = &mon_fifo_list;
+ mon_fifo_list.fifo_prev->fifo_next = md;
+ mon_fifo_list.fifo_prev = md;
}
diff -c xntpd/ntp_proto.c:1.1.1.19 xntpd/ntp_proto.c:3.21
*** xntpd/ntp_proto.c:1.1.1.19 Wed Feb 2 18:16:51 1994
--- xntpd/ntp_proto.c Wed Feb 2 18:16:52 1994
***************
*** 49,54 ****
--- 49,55 ----
U_LONG sys_processed; /* packets processed */
U_LONG sys_badauth; /* packets dropped because of authorization */
U_LONG sys_wanderhold; /* sys_peer held to prevent wandering */
+ U_LONG sys_limitrejected; /* pkts rejected due toclient count per net */
/*
* Imported from ntp_timer.c
***************
*** 373,378 ****
--- 374,394 ----
return;
/*
+ * See if we only accept limited number of clients
+ * from the net this guy is from.
+ * Note: the flag is determined dynamically within restrictions()
+ */
+ if (restrict & RES_LIMITED) {
+ extern U_LONG client_limit;
+
+ sys_limitrejected++;
+ syslog(LOG_NOTICE,
+ "rejected mode %d request from %s - per net client limit (%d) exceeded",
+ PKT_MODE(pkt->li_vn_mode),
+ ntoa(&rbufp->recv_srcadr), client_limit);
+ return;
+ }
+ /*
* Dump anything with a putrid stratum. These will most likely
* come from someone trying to poll us with ntpdc.
*/
***************
*** 2165,2168 ****
--- 2181,2185 ----
sys_badauth = 0;
sys_wanderhold = 0;
sys_stattime = current_time;
+ sys_limitrejected = 0;
}
diff -c xntpd/ntp_request.c:1.1.1.14 xntpd/ntp_request.c:3.15
*** xntpd/ntp_request.c:1.1.1.14 Wed Feb 2 18:16:55 1994
--- xntpd/ntp_request.c Wed Feb 2 18:16:55 1994
***************
*** 916,921 ****
--- 916,922 ----
extern U_LONG sys_processed;
extern U_LONG sys_badauth;
extern U_LONG sys_wanderhold;
+ extern U_LONG sys_limitrejected;
ss = (struct info_sys_stats *)prepare_pkt(srcadr, inter, inpkt,
sizeof(struct info_sys_stats));
***************
*** 930,936 ****
ss->processed = htonl(sys_processed);
ss->badauth = htonl(sys_badauth);
ss->wanderhold = htonl(sys_wanderhold);
!
(void) more_pkt();
flush_pkt();
}
--- 931,937 ----
ss->processed = htonl(sys_processed);
ss->badauth = htonl(sys_badauth);
ss->wanderhold = htonl(sys_wanderhold);
! ss->limitrejected = htonl(sys_limitrejected);
(void) more_pkt();
flush_pkt();
}
***************
*** 1311,1317 ****
struct interface *inter;
struct req_pkt *inpkt;
{
! mon_start();
req_ack(srcadr, inter, inpkt, INFO_OKAY);
}
--- 1312,1318 ----
struct interface *inter;
struct req_pkt *inpkt;
{
! mon_start(MON_ON);
req_ack(srcadr, inter, inpkt, INFO_OKAY);
}
***************
*** 1325,1331 ****
struct interface *inter;
struct req_pkt *inpkt;
{
! mon_stop();
req_ack(srcadr, inter, inpkt, INFO_OKAY);
}
--- 1326,1332 ----
struct interface *inter;
struct req_pkt *inpkt;
{
! mon_stop(MON_ON);
req_ack(srcadr, inter, inpkt, INFO_OKAY);
}
***************
*** 1497,1502 ****
--- 1498,1507 ----
md = md->mru_next) {
im->lasttime = htonl(current_time - md->lasttime);
im->firsttime = htonl(current_time - md->firsttime);
+ if (md->lastdrop)
+ im->lastdrop = htonl(current_time - md->lastdrop);
+ else
+ im->lastdrop = 0;
im->count = htonl(md->count);
im->addr = md->rmtadr;
im->port = md->rmtport;
diff -c xntpd/ntp_restrict.c:1.1.1.10 xntpd/ntp_restrict.c:3.10
*** xntpd/ntp_restrict.c:1.1.1.10 Wed Feb 2 18:16:57 1994
--- xntpd/ntp_restrict.c Wed Feb 2 18:16:57 1994
***************
*** 1,4 ****
! /* ntp_restrict.c,v 3.1 1993/07/06 01:11:28 jbj Exp
* ntp_restrict.c - find out what restrictions this host is running under
*/
#include <stdio.h>
--- 1,4 ----
! /*
* ntp_restrict.c - find out what restrictions this host is running under
*/
#include <stdio.h>
***************
*** 60,65 ****
--- 60,80 ----
U_LONG res_timereset;
/*
+ * Parameters of the RES_LIMITED restriction option.
+ * client_limit is the number of hosts allowed per source net
+ * client_limit_period is the number of seconds after which an entry
+ * is no longer considered for client limit determination
+ */
+ U_LONG client_limit;
+ U_LONG client_limit_period;
+ /*
+ * count number of restriction entries referring to RES_LIMITED
+ * controls activation/deactivation of monitoring
+ * (with respect ro RES_LIMITED control)
+ */
+ U_LONG res_limited_refcnt;
+
+ /*
* Our initial allocation of list entries.
*/
static struct restrictlist resinit[INITRESLIST];
***************
*** 70,81 ****
--- 85,102 ----
extern U_LONG current_time;
/*
+ * debug flag
+ */
+ extern int debug;
+
+ /*
* init_restrict - initialize the restriction data structures
*/
void
init_restrict()
{
register int i;
+ char bp[80];
/*
* Zero the list and put all but one on the free list
***************
*** 108,113 ****
--- 129,146 ----
res_found = 0;
res_not_found = 0;
res_timereset = 0;
+
+ /*
+ * set default values for RES_LIMIT functionality
+ */
+ client_limit = 3;
+ client_limit_period = 3600;
+ res_limited_refcnt = 0;
+
+ sprintf(bp, "client_limit=%d", client_limit);
+ set_sys_var(bp, strlen(bp)+1, RO);
+ sprintf(bp, "client_limit_period=%d", client_limit_period);
+ set_sys_var(bp, strlen(bp)+1, RO);
}
***************
*** 150,155 ****
--- 183,302 ----
else
res_found++;
+ /*
+ * The following implements limiting the number of clients
+ * accepted from a given network. The notion of "same network"
+ * is determined by the mask and addr fields of the restrict
+ * list entry. The monitor mechanism has to be enabled for
+ * collecting info on current clients.
+ *
+ * The policy is as follows:
+ * - take the list of clients recorded
+ * from the given "network" seen within the last
+ * client_limit_period seconds
+ * - if there are at most client_limit entries:
+ * --> access allowed
+ * - otherwise sort by time first seen
+ * - current client among the first client_limit seen
+ * hosts?
+ * if yes: access allowed
+ * else: eccess denied
+ */
+ if (match->flags & RES_LIMITED) {
+ int lcnt;
+ struct mon_data *md, *this_client;
+ extern int mon_enabled;
+ extern struct mon_data mon_fifo_list, mon_mru_list;
+
+ #ifdef DEBUG
+ if (debug > 2)
+ printf("limited clients check: %d clients, period %d seconds, net is 0x%X\n",
+ client_limit, client_limit_period,
+ netof(hostaddr));
+ #endif /*DEBUG*/
+ if (mon_enabled == MON_OFF) {
+ #ifdef DEBUG
+ if (debug > 4)
+ printf("no limit - monitoring is off\n");
+ #endif
+ return (int)(match->flags & ~RES_LIMITED);
+ }
+
+ /*
+ * How nice, MRU list provides our current client as the
+ * first entry in the list.
+ * Monitoring was verified to be active above, thus we
+ * know an entry for our client must exist, or some
+ * brain dead set the memory limit for mon entries to ZERO!!!
+ */
+ this_client = mon_mru_list.mru_next;
+
+ for (md = mon_fifo_list.fifo_next,lcnt = 0;
+ md != &mon_fifo_list;
+ md = md->fifo_next) {
+ if ((current_time - md->lasttime)
+ > client_limit_period) {
+ #ifdef DEBUG
+ if (debug > 5)
+ printf("checking: %s: ignore: too old: %d\n",
+ numtoa(md->rmtadr),
+ current_time - md->lasttime);
+ #endif
+ continue;
+ }
+ if (md->mode == MODE_BROADCAST ||
+ md->mode == MODE_CONTROL ||
+ md->mode == MODE_PRIVATE) {
+ #ifdef DEBUG
+ if (debug > 5)
+ printf("checking: %s: ignore mode %d\n",
+ numtoa(md->rmtadr),
+ md->mode);
+ #endif
+ continue;
+ }
+ if (netof(md->rmtadr) !=
+ netof(hostaddr)) {
+ #ifdef DEBUG
+ if (debug > 5)
+ printf("checking: %s: different net 0x%X\n",
+ numtoa(md->rmtadr),
+ netof(md->rmtadr));
+ #endif
+ continue;
+ }
+ lcnt++;
+ if (lcnt > client_limit ||
+ md->rmtadr == hostaddr) {
+ #ifdef DEBUG
+ if (debug > 5)
+ printf("considering %s: found host\n",
+ numtoa(md->rmtadr));
+ #endif
+ break;
+ }
+ #ifdef DEBUG
+ else {
+ if (debug > 5)
+ printf("considering %s: same net\n",
+ numtoa(md->rmtadr));
+ }
+ #endif
+
+ }
+ #ifdef DEBUG
+ if (debug > 4)
+ printf("this one is rank %d in list, limit is %d: %s\n",
+ lcnt, client_limit,
+ (lcnt <= client_limit) ? "ALLOW" : "REJECT");
+ #endif
+ if (lcnt <= client_limit) {
+ this_client->lastdrop = 0;
+ return (int)(match->flags & ~RES_LIMITED);
+ } else {
+ this_client->lastdrop = current_time;
+ }
+ }
return (int)match->flags;
}
***************
*** 257,262 ****
--- 404,413 ----
rlprev->next = rl;
restrictcount++;
}
+ if ((rl->flags ^ (u_short)flags) & RES_LIMITED) {
+ res_limited_refcnt++;
+ mon_start(MON_RES); /* ensure data gets collected */
+ }
rl->flags |= (u_short)flags;
break;
***************
*** 265,272 ****
* Remove some bits from the flags. If we didn't
* find this one, just return.
*/
! if (rl != 0)
rl->flags &= (u_short)~flags;
break;
case RESTRICT_REMOVE:
--- 416,429 ----
* Remove some bits from the flags. If we didn't
* find this one, just return.
*/
! if (rl != 0) {
! if ((rl->flags ^ (u_short)flags) & RES_LIMITED) {
! res_limited_refcnt--;
! if (res_limited_refcnt == 0)
! mon_stop(MON_RES);
! }
rl->flags &= (u_short)~flags;
+ }
break;
case RESTRICT_REMOVE:
***************
*** 280,285 ****
--- 437,447 ----
&& !(rl->mflags & RESM_INTERFACE)) {
rlprev->next = rl->next;
restrictcount--;
+ if (rl->flags & RES_LIMITED) {
+ res_limited_refcnt--;
+ if (res_limited_refcnt == 0)
+ mon_stop(MON_RES);
+ }
memset((char *)rl, 0, sizeof(struct restrictlist));
rl->next = resfree;
diff -c xntpd/ntp_unixclock.c:1.1.1.27 xntpd/ntp_unixclock.c:3.29
*** xntpd/ntp_unixclock.c:1.1.1.27 Wed Feb 2 18:17:00 1994
--- xntpd/ntp_unixclock.c Wed Feb 2 18:17:01 1994
***************
*** 556,568 ****
#endif /* SOLARIS */
#ifdef SYS_LINUX
! /* XXX should look this up somewhere ! */
static void
clock_parms(tickadj, tick)
U_LONG *tickadj;
U_LONG *tick;
{
! *tickadj = (U_LONG)1;
! *tick = (U_LONG)10000;
}
#endif /* SYS_LINUX */
--- 556,573 ----
#endif /* SOLARIS */
#ifdef SYS_LINUX
! #include <sys/timex.h>
static void
clock_parms(tickadj, tick)
U_LONG *tickadj;
U_LONG *tick;
{
! struct timex txc;
!
! txc.mode = 0;
! __adjtimex(&txc);
!
! *tickadj = (U_LONG)1; /* our adjtime is accurate */
! *tick = (U_LONG)txc.tick;
}
#endif /* SYS_LINUX */
diff -c xntpdc/ntpdc_ops.c:1.1.1.12 xntpdc/ntpdc_ops.c:3.16
*** xntpdc/ntpdc_ops.c:1.1.1.12 Wed Feb 2 18:17:35 1994
--- xntpdc/ntpdc_ops.c Wed Feb 2 18:17:36 1994
***************
*** 846,853 ****
if (!check1item(items, fp))
return;
! if (!checkitemsize(itemsize, sizeof(struct info_sys_stats)))
return;
(void) fprintf(fp, "system uptime: %d\n",
ntohl(ss->timeup));
--- 846,857 ----
if (!check1item(items, fp))
return;
! if (itemsize != sizeof(struct info_sys_stats) &&
! itemsize != sizeof(struct old_info_sys_stats)) {
! /* issue warning according to new structure size */
! checkitemsize(itemsize, sizeof(struct info_sys_stats));
return;
+ }
(void) fprintf(fp, "system uptime: %d\n",
ntohl(ss->timeup));
***************
*** 869,874 ****
--- 873,883 ----
ntohl(ss->badauth));
(void) fprintf(fp, "wander hold downs: %d\n",
ntohl(ss->wanderhold));
+ if (itemsize != sizeof(struct info_sys_stats))
+ return;
+
+ (void) fprintf(fp, "limitation rejects: %d\n",
+ ntohl(ss->limitrejected));
}
***************
*** 1243,1248 ****
--- 1252,1258 ----
{ "nopeer", RES_NOPEER },
{ "notrap", RES_NOTRAP },
{ "lptrap", RES_LPTRAP },
+ { "limited", RES_LIMITED },
{ "", 0 }
};
***************
*** 1463,1468 ****
--- 1473,1479 ----
FILE *fp;
{
struct info_monitor *ml;
+ struct old_info_monitor *oml;
int items;
int itemsize;
int res;
***************
*** 1476,1498 ****
if (!checkitems(items, fp))
return;
! if (!checkitemsize(itemsize, sizeof(struct info_monitor)))
! return;
! (void) fprintf(fp,
! " address port count mode version lasttime firsttime\n");
! (void) fprintf(fp,
! "=====================================================================\n");
! while (items > 0) {
! (void) fprintf(fp, "%-20.20s %5d %9d %4d %3d %9u %9u\n",
! nntohost(ml->addr),
! ntohs(ml->port),
! ntohl(ml->count),
! ml->mode, ml->version,
! ntohl(ml->lasttime),
! ntohl(ml->firsttime));
! ml++;
! items--;
}
}
--- 1487,1535 ----
if (!checkitems(items, fp))
return;
! if (itemsize == sizeof(struct info_monitor)) {
! (void) fprintf(fp,
! " address port count mode version lastdrop lasttime firsttime\n");
! (void) fprintf(fp,
! "===============================================================================\n");
! while (items > 0) {
! (void) fprintf(fp, "%-20.20s %5d %9d %4d %3d %9u %9u %9u\n",
! nntohost(ml->addr),
! ntohs(ml->port),
! ntohl(ml->count),
! ml->mode,
! ml->version,
! ntohl(ml->lastdrop),
! ntohl(ml->lasttime),
! ntohl(ml->firsttime));
! ml++;
! items--;
! }
! } else {
! if (itemsize != sizeof(struct old_info_monitor)) {
! /* issue warning according to new info_monitor size */
! checkitemsize(itemsize, sizeof(struct info_monitor));
! return;
! }
!
! oml = (struct old_info_monitor *)ml;
! (void) fprintf(fp,
! " address port count mode version lasttime firsttime\n");
! (void) fprintf(fp,
! "======================================================================\n");
! while (items > 0) {
! (void) fprintf(fp, "%-20.20s %5d %9d %4d %3d %9u %9u\n",
! nntohost(oml->addr),
! ntohs(oml->port),
! ntohl(oml->count),
! oml->mode,
! oml->version,
! ntohl(oml->lasttime),
! ntohl(oml->firsttime));
! oml++;
! items--;
! }
}
}
Reference in New Issue View Git Blame Copy Permalink