d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ae573a91cf
freebsd-dev/sys/arm/broadcom/bcm2835/bcm2835_pwm.c
Oleksandr Tymoshenko 3b1d758fba [pi] Do not attach bcm2835_pwm if DTB node is not enabled 
Switch to standard FDT-base driver behavior and don't attach
if node "status" property value nn DTS is not set to "okay"

On RPi PWM by default is disabled, to enable it pwm.dtbo
from official repo[1] should be copied to overlays directory
on SD card FAT partition and "dtoverlay=pwm" line added to
config.txt. For more details see pwm overlay documentation[2]

sysutils/rpi-firmware port now includes overlays, so they
can be installed as a part of release image build.

[1] https://github.com/raspberrypi/firmware/tree/master/boot
[2] https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README

No objections from:	phk@
2018-04-10 20:31:25 +00:00

376 lines
8.8 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2017 Poul-Henning Kamp <phk@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <sys/lock.h>
#include <sys/sysctl.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <arm/broadcom/bcm2835/bcm2835_clkman.h>
static struct ofw_compat_data compat_data[] = {
{"broadcom,bcm2835-pwm", 1},
{"brcm,bcm2835-pwm", 1},
{NULL, 0}
};
struct bcm_pwm_softc {
device_t sc_dev;
struct resource * sc_mem_res;
bus_space_tag_t sc_m_bst;
bus_space_handle_t sc_m_bsh;
device_t clkman;
uint32_t freq;
uint32_t period;
uint32_t ratio;
uint32_t mode;
};
#define BCM_PWM_MEM_WRITE(_sc, _off, _val) \
bus_space_write_4(_sc->sc_m_bst, _sc->sc_m_bsh, _off, _val)
#define BCM_PWM_MEM_READ(_sc, _off) \
bus_space_read_4(_sc->sc_m_bst, _sc->sc_m_bsh, _off)
#define BCM_PWM_CLK_WRITE(_sc, _off, _val) \
bus_space_write_4(_sc->sc_c_bst, _sc->sc_c_bsh, _off, _val)
#define BCM_PWM_CLK_READ(_sc, _off) \
bus_space_read_4(_sc->sc_c_bst, _sc->sc_c_bsh, _off)
#define W_CTL(_sc, _val) BCM_PWM_MEM_WRITE(_sc, 0x00, _val)
#define R_CTL(_sc) BCM_PWM_MEM_READ(_sc, 0x00)
#define W_STA(_sc, _val) BCM_PWM_MEM_WRITE(_sc, 0x04, _val)
#define R_STA(_sc) BCM_PWM_MEM_READ(_sc, 0x04)
#define W_RNG(_sc, _val) BCM_PWM_MEM_WRITE(_sc, 0x10, _val)
#define R_RNG(_sc) BCM_PWM_MEM_READ(_sc, 0x10)
#define W_DAT(_sc, _val) BCM_PWM_MEM_WRITE(_sc, 0x14, _val)
#define R_DAT(_sc) BCM_PWM_MEM_READ(_sc, 0x14)
static int
bcm_pwm_reconf(struct bcm_pwm_softc *sc)
{
uint32_t u;
/* Disable PWM */
W_CTL(sc, 0);
/* Stop PWM clock */
(void)bcm2835_clkman_set_frequency(sc->clkman, BCM_PWM_CLKSRC, 0);
if (sc->mode == 0)
return (0);
u = bcm2835_clkman_set_frequency(sc->clkman, BCM_PWM_CLKSRC, sc->freq);
if (u == 0)
return (EINVAL);
sc->freq = u;
/* Config PWM */
W_RNG(sc, sc->period);
if (sc->ratio > sc->period)
sc->ratio = sc->period;
W_DAT(sc, sc->ratio);
/* Start PWM */
if (sc->mode == 1)
W_CTL(sc, 0x81);
else
W_CTL(sc, 0x1);
return (0);
}
static int
bcm_pwm_pwm_freq_proc(SYSCTL_HANDLER_ARGS)
{
struct bcm_pwm_softc *sc;
uint32_t r;
int error;
sc = (struct bcm_pwm_softc *)arg1;
if (sc->mode == 1)
r = sc->freq / sc->period;
else
r = 0;
error = sysctl_handle_int(oidp, &r, sizeof(r), req);
return (error);
}
static int
bcm_pwm_mode_proc(SYSCTL_HANDLER_ARGS)
{
struct bcm_pwm_softc *sc;
uint32_t r;
int error;
sc = (struct bcm_pwm_softc *)arg1;
r = sc->mode;
error = sysctl_handle_int(oidp, &r, sizeof(r), req);
if (error != 0 || req->newptr == NULL)
return (error);
if (r > 2)
return (EINVAL);
sc->mode = r;
return (bcm_pwm_reconf(sc));
}
static int
bcm_pwm_freq_proc(SYSCTL_HANDLER_ARGS)
{
struct bcm_pwm_softc *sc;
uint32_t r;
int error;
sc = (struct bcm_pwm_softc *)arg1;
r = sc->freq;
error = sysctl_handle_int(oidp, &r, sizeof(r), req);
if (error != 0 || req->newptr == NULL)
return (error);
if (r > 125000000)
return (EINVAL);
sc->freq = r;
return (bcm_pwm_reconf(sc));
}
static int
bcm_pwm_period_proc(SYSCTL_HANDLER_ARGS)
{
struct bcm_pwm_softc *sc;
int error;
sc = (struct bcm_pwm_softc *)arg1;
error = sysctl_handle_int(oidp, &sc->period, sizeof(sc->period), req);
if (error != 0 || req->newptr == NULL)
return (error);
return (bcm_pwm_reconf(sc));
}
static int
bcm_pwm_ratio_proc(SYSCTL_HANDLER_ARGS)
{
struct bcm_pwm_softc *sc;
uint32_t r;
int error;
sc = (struct bcm_pwm_softc *)arg1;
r = sc->ratio;
error = sysctl_handle_int(oidp, &r, sizeof(r), req);
if (error != 0 || req->newptr == NULL)
return (error);
if (r > sc->period) // XXX >= ?
return (EINVAL);
sc->ratio = r;
BCM_PWM_MEM_WRITE(sc, 0x14, sc->ratio);
return (0);
}
static int
bcm_pwm_reg_proc(SYSCTL_HANDLER_ARGS)
{
struct bcm_pwm_softc *sc;
uint32_t reg;
int error;
sc = (struct bcm_pwm_softc *)arg1;
reg = BCM_PWM_MEM_READ(sc, arg2 & 0xff);
error = sysctl_handle_int(oidp, &reg, sizeof(reg), req);
if (error != 0 || req->newptr == NULL)
return (error);
BCM_PWM_MEM_WRITE(sc, arg2, reg);
return (0);
}
static void
bcm_pwm_sysctl_init(struct bcm_pwm_softc *sc)
{
struct sysctl_ctx_list *ctx;
struct sysctl_oid *tree_node;
struct sysctl_oid_list *tree;
/*
* Add system sysctl tree/handlers.
*/
ctx = device_get_sysctl_ctx(sc->sc_dev);
tree_node = device_get_sysctl_tree(sc->sc_dev);
tree = SYSCTL_CHILDREN(tree_node);
if (bootverbose) {
#define RR(x,y) \
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, y, \
CTLFLAG_RW | CTLTYPE_UINT, sc, 0x##x, \
bcm_pwm_reg_proc, "IU", "Register 0x" #x " " y);
RR(24, "DAT2")
RR(20, "RNG2")
RR(18, "FIF1")
RR(14, "DAT1")
RR(10, "RNG1")
RR(08, "DMAC")
RR(04, "STA")
RR(00, "CTL")
#undef RR
}
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "pwm_freq",
CTLFLAG_RD | CTLTYPE_UINT, sc, 0,
bcm_pwm_pwm_freq_proc, "IU", "PWM frequency (Hz)");
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "period",
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
bcm_pwm_period_proc, "IU", "PWM period (#clocks)");
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "ratio",
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
bcm_pwm_ratio_proc, "IU", "PWM ratio (0...period)");
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "freq",
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
bcm_pwm_freq_proc, "IU", "PWM clock (Hz)");
SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "mode",
CTLFLAG_RW | CTLTYPE_UINT, sc, 0,
bcm_pwm_mode_proc, "IU", "PWM mode (0=off, 1=pwm, 2=dither)");
}
static int
bcm_pwm_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
return (ENXIO);
device_set_desc(dev, "BCM2708/2835 PWM controller");
return (BUS_PROBE_DEFAULT);
}
static int
bcm_pwm_attach(device_t dev)
{
struct bcm_pwm_softc *sc;
int rid;
if (device_get_unit(dev) != 0) {
device_printf(dev, "only one PWM controller supported\n");
return (ENXIO);
}
sc = device_get_softc(dev);
sc->sc_dev = dev;
sc->clkman = devclass_get_device(devclass_find("bcm2835_clkman"), 0);
if (sc->clkman == NULL) {
device_printf(dev, "cannot find Clock Manager\n");
return (ENXIO);
}
rid = 0;
sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (!sc->sc_mem_res) {
device_printf(dev, "cannot allocate memory window\n");
return (ENXIO);
}
sc->sc_m_bst = rman_get_bustag(sc->sc_mem_res);
sc->sc_m_bsh = rman_get_bushandle(sc->sc_mem_res);
/* Add sysctl nodes. */
bcm_pwm_sysctl_init(sc);
sc->freq = 125000000;
sc->period = 10000;
sc->ratio = 2500;
return (bus_generic_attach(dev));
}
static int
bcm_pwm_detach(device_t dev)
{
struct bcm_pwm_softc *sc;
bus_generic_detach(dev);
sc = device_get_softc(dev);
sc->mode = 0;
(void)bcm_pwm_reconf(sc);
if (sc->sc_mem_res)
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);
return (0);
}
static phandle_t
bcm_pwm_get_node(device_t bus, device_t dev)
{
return (ofw_bus_get_node(bus));
}
static device_method_t bcm_pwm_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, bcm_pwm_probe),
DEVMETHOD(device_attach, bcm_pwm_attach),
DEVMETHOD(device_detach, bcm_pwm_detach),
DEVMETHOD(ofw_bus_get_node, bcm_pwm_get_node),
DEVMETHOD_END
};
static devclass_t bcm_pwm_devclass;
static driver_t bcm_pwm_driver = {
"pwm",
bcm_pwm_methods,
sizeof(struct bcm_pwm_softc),
};
DRIVER_MODULE(bcm2835_pwm, simplebus, bcm_pwm_driver, bcm_pwm_devclass, 0, 0);
MODULE_DEPEND(bcm2835_pwm, bcm2835_clkman, 1, 1, 1);
Reference in New Issue View Git Blame Copy Permalink