2825e76714
See: http://www.amd.com/products/npd/overview/homenetworking/intro.html PR: kern/12275 Submitted by: Robert Watson <robert@cyrus.watson.org>
173 lines
5.3 KiB
C
173 lines
5.3 KiB
C
/*
|
|
* Am7990, Local Area Network Controller for Ethernet (LANCE)
|
|
*
|
|
* Copyright (c) 1994, Paul Richards. This software may be used,
|
|
* modified, copied, distributed, and sold, in both source and binary
|
|
* form provided that the above copyright and these terms are retained.
|
|
* Under no circumstances is the author responsible for the proper
|
|
* functioning of this software, nor does the author assume any
|
|
* responsibility for damages incurred with its use.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* The LANCE has four Control and Status Registers(CSRs) which are accessed
|
|
* through two bus addressable ports, the address port (RAP) and the data
|
|
* port (RDP).
|
|
*
|
|
*/
|
|
|
|
#define CSR0 0
|
|
#define CSR1 1
|
|
#define CSR2 2
|
|
#define CSR3 3
|
|
#define CSR88 88
|
|
#define CSR89 89
|
|
|
|
#define BCR49 49
|
|
#define BCR32 32
|
|
#define BCR33 33
|
|
#define BCR34 34
|
|
|
|
|
|
/* Control and Status Register Masks */
|
|
|
|
/* CSR0 */
|
|
|
|
#define ERR 0x8000
|
|
#define BABL 0x4000
|
|
#define CERR 0x2000
|
|
#define MISS 0x1000
|
|
#define MERR 0x0800
|
|
#define RINT 0x0400
|
|
#define TINT 0x0200
|
|
#define IDON 0x0100
|
|
#define INTR 0x0080
|
|
#define INEA 0x0040
|
|
#define RXON 0x0020
|
|
#define TXON 0x0010
|
|
#define TDMD 0x0008
|
|
#define STOP 0x0004
|
|
#define STRT 0x0002
|
|
#define INIT 0x0001
|
|
|
|
/*
|
|
* CSR3
|
|
*
|
|
* Bits 3-15 are reserved.
|
|
*
|
|
*/
|
|
|
|
#define BSWP 0x0004
|
|
#define ACON 0x0002
|
|
#define BCON 0x0001
|
|
|
|
/* Initialisation block */
|
|
|
|
struct init_block {
|
|
u_short mode; /* Mode register */
|
|
u_char padr[6]; /* Ethernet address */
|
|
u_char ladrf[8]; /* Logical address filter (multicast) */
|
|
u_short rdra; /* Low order pointer to receive ring */
|
|
u_short rlen; /* High order pointer and no. rings */
|
|
u_short tdra; /* Low order pointer to transmit ring */
|
|
u_short tlen; /* High order pointer and no rings */
|
|
};
|
|
|
|
/* Initialisation Block Mode Register Masks */
|
|
|
|
#define PROM 0x8000 /* Promiscuous Mode */
|
|
#define DRCVBC 0x4000 /* Disable Receive Broadcast */
|
|
#define DRCVPA 0x2000 /* Disable Receive Physical Address */
|
|
#define DLNKTST 0x1000 /* Disable Link Status */
|
|
#define DAPC 0x0800 /* Disable Automatic Polarity Correction */
|
|
#define MENDECL 0x0400 /* MENDEC Loopback Mode */
|
|
#define LRT 0x0200 /* Low Receive Threshold (T-MAU mode only) */
|
|
#define TSEL 0x0200 /* Transmit Mode Select (AUI mode only) */
|
|
#define PORTSEL 0x0180 /* Port Select bits */
|
|
#define INTL 0x0040 /* Internal Loopback */
|
|
#define DRTY 0x0020 /* Disable Retry */
|
|
#define FCOLL 0x0010 /* Force Collision */
|
|
#define DXMTFCS 0x0008 /* Disable transmit CRC (FCS) */
|
|
#define LOOP 0x0004 /* Loopback Enabl */
|
|
#define DTX 0x0002 /* Disable the transmitter */
|
|
#define DRX 0x0001 /* Disable the receiver */
|
|
|
|
/*
|
|
* Message Descriptor Structure
|
|
*
|
|
* Each transmit or receive descriptor ring entry (RDRE's and TDRE's)
|
|
* is composed of 4, 16-bit, message descriptors. They contain the following
|
|
* information.
|
|
*
|
|
* 1. The address of the actual message data buffer in user (host) memory.
|
|
* 2. The length of that message buffer.
|
|
* 3. The status information for that particular buffer. The eight most
|
|
* significant bits of md1 are collectively termed the STATUS of the
|
|
* descriptor.
|
|
*
|
|
* Descriptor md0 contains LADR 0-15, the low order 16 bits of the 24-bit
|
|
* address of the actual data buffer. Bits 0-7 of descriptor md1 contain
|
|
* HADR, the high order 8-bits of the 24-bit data buffer address. Bits 8-15
|
|
* of md1 contain the status flags of the buffer. Descriptor md2 contains the
|
|
* buffer byte count in bits 0-11 as a two's complement number and must have
|
|
* 1's written to bits 12-15. For the receive entry md3 has the Message Byte
|
|
* Count in bits 0-11, this is the length of the received message and is valid
|
|
* only when ERR is cleared and ENP is set. For the transmit entry it contains
|
|
* more status information.
|
|
*
|
|
*/
|
|
|
|
struct mds {
|
|
u_short md0;
|
|
u_short md1;
|
|
short md2;
|
|
u_short md3;
|
|
};
|
|
|
|
/* Receive STATUS flags for md1 */
|
|
|
|
#define OWN 0x8000 /* Owner bit, 0=host, 1=Lance */
|
|
#define MDERR 0x4000 /* Error */
|
|
#define FRAM 0x2000 /* Framing error error */
|
|
#define OFLO 0x1000 /* Silo overflow */
|
|
#define CRC 0x0800 /* CRC error */
|
|
#define RBUFF 0x0400 /* Buffer error */
|
|
#define STP 0x0200 /* Start of packet */
|
|
#define ENP 0x0100 /* End of packet */
|
|
#define HADR 0x00FF /* High order address bits */
|
|
|
|
/* Receive STATUS flags for md2 */
|
|
|
|
#define BCNT 0x0FFF /* Size of data buffer as 2's comp. no. */
|
|
|
|
/* Receive STATUS flags for md3 */
|
|
|
|
#define MCNT 0x0FFF /* Total size of data for received packet */
|
|
|
|
/* Transmit STATUS flags for md1 */
|
|
|
|
#define ADD_FCS 0x2000 /* Controls generation of FCS */
|
|
#define MORE 0x1000 /* Indicates more than one retry was needed */
|
|
#define ONE 0x0800 /* Exactly one retry was needed */
|
|
#define DEF 0x0400 /* Packet transmit deferred -- channel busy */
|
|
|
|
/*
|
|
* Transmit status flags for md2
|
|
*
|
|
* Same as for receive descriptor.
|
|
*
|
|
* BCNT 0x0FFF Size of data buffer as 2's complement number.
|
|
*
|
|
*/
|
|
|
|
/* Transmit status flags for md3 */
|
|
|
|
#define TBUFF 0x8000 /* Buffer error */
|
|
#define UFLO 0x4000 /* Silo underflow */
|
|
#define LCOL 0x1000 /* Late collision */
|
|
#define LCAR 0x0800 /* Loss of carrier */
|
|
#define RTRY 0x0400 /* Tried 16 times */
|
|
#define TDR 0x03FF /* Time domain reflectometry */
|
|
|